MIBs Depot

LLDP-EXT-DOT1-V2-MIB

Registered at
1.3.111.2.802.1.1.13.1.5.32962
Last updated
2018-06-21 00:00
Organization
IEEE 802.1 Working Group
Revisions
2018-06-21 00:00, 2015-02-16 00:00, 2015-02-16 00:00, 2014-12-15 00:00, 2011-03-25 00:00, 2011-03-23 00:00, 2009-06-08 00:00
Namespace
standard
Source file
LLDP-EXT-DOT1-V2-MIB
Digest
sha256:4686cce533013f34fe3b3bb405172f20bc58f15aeaef9e2e7373866882405180

Description

The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. In order to ensure the uniqueness of the LLDP-V2-MIB, lldpV2Xdot1MIB is branched from lldpV2Extensions using an Organizationally Unique Identifier (OUI) value as the node. An OUI is a 24 bit globally unique number assigned by the IEEE Registration Authority - see: http://standards.ieee.org/develop/regauth/oui/index.html Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is published as D.5.5 of IEEE Std 802.1Q; see the standard itself for full legal notices.

Contact

WG-URL: http://www.ieee802.org/1/ WG-EMail: STDS-802-1-L@IEEE.ORG Contact: IEEE 802.1 Working Group Chair Postal: C/O IEEE 802.1 Working Group IEEE Standards Association 445 Hoes Lane Piscataway NJ 08854 USA E-mail: STDS-802-1-L@IEEE.ORG

Imports

FromSymbols
IEEE8021-TC-MIBIEEE8021PriorityValue
IF-MIBifGeneralInformationGroup
LLDP-V2-MIBlldpV2Extensions, lldpV2LocPortIfIndex, lldpV2PortConfigEntry, lldpV2RemIndex, lldpV2RemLocalDestMACAddress, lldpV2RemLocalIfIndex, lldpV2RemTimeMark
Q-BRIDGE-MIBVlanId
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANAifType-MIB
IEEE8021-TC-MIB
IF-MIB
LLDP-EXT-DOT1-V2-MIB
LLDP-V2-MIB
LLDP-V2-TC-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
LldpV2CnBitVector
TEXTUAL-CONVENTION
This TC describes a bit vector used in the Congestion Notification objects. Each bit represents a Boolean status associated with a priority code point. A bit value of 0 represents FALSE, 1 represents TRUE. The bit 'pri0status(0)' indicates the status for priority 0 The bit 'pri1status(1)' indicates the status for priority 1 The bit 'pri2status(2)' indicates the status for priority 2 The bit 'pri3status(3)' indicates the status for priority 3 The bit 'pri4status(4)' indicates the status for priority 4 The bit 'pri5status(5)' indicates the status for priority 5 The bit 'pri6status(6)' indicates the status for priority 6 The bit 'pri7status(7)' indicates the status for priority 7
current
LldpV2XLinkAggStatusMap
TEXTUAL-CONVENTION
This TC describes the link aggregation status. The bit 'aggCapable(0)' indicates the link is capable of being aggregated if 1, not capable if 0. The bit 'aggEnabled(1)' indicates the link is currently in an aggregation if 1, not in an aggregation if 0. The bits 'portTypeLS(1)' and portTypeMS(2)' form the LS and MS bits of a Port Type value respectively: 00 = no port type specified 01 = transmitted from Aggregation Port 10 = transmitted from Aggregator 11 = transmitted from an Aggregator with a single Aggregation Port. The remaining bits are reserved for future standardization.
current
LldpXdot1dcbxAppProtocol
TEXTUAL-CONVENTION
Contains the application protocol indicator the type of which is specified by an object with the syntax of LldpXdot1dcbxAppSelector
current
LldpXdot1dcbxAppSelector
TEXTUAL-CONVENTION
Indicates the contents of a protocol object 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.)
current
LldpXdot1dcbxSupportedCapacity
TEXTUAL-CONVENTION
Indicates the supported capacity of a given feature, for example, the number of traffic classes supported. This TC is used for features that have a maximum capacity of eight and a minimum of one.
current
LldpXdot1dcbxTrafficClassBandwidthValue
TEXTUAL-CONVENTION
Indicates the bandwidth in percent assigned to a traffic class.
current
LldpXdot1dcbxTrafficClassValue
TEXTUAL-CONVENTION
Indicates a traffic class. Values 0-7 correspond to traffic classes.
current
LldpXdot1dcbxTrafficSelectionAlgorithm
TEXTUAL-CONVENTION
Indicates the Traffic Selection Algorithm 0: Strict Priority 1: Credit-based shaper 2: Enhanced transmission selection 3-254: Reserved for furture standardization 255: Vendor specific
current

Objects

NameOIDSyntaxAccessStatus
lldpV2Xdot1Objects
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.1
lldpV2Xdot1Config
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.1.1
lldpV2Xdot1ConfigPortVlanTable
OBJECT-TYPE
A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.1.1.1not-accessiblecurrent
lldpV2Xdot1ConfigPortVlanEntry
OBJECT-TYPE
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Port VLAN-ID TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.1.1not-accessiblecurrent
lldpV2Xdot1ConfigPortVlanTxEnable
OBJECT-TYPE
The lldpV2Xdot1ConfigPortVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.1.1.1TruthValueread-writecurrent
lldpV2Xdot1ConfigVlanNameTable
OBJECT-TYPE
The table that controls selection of LLDP VLAN name TLV instances to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.1.1.2not-accessiblecurrent
lldpV2Xdot1ConfigVlanNameEntry
OBJECT-TYPE
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System VLAN name instance is transmitted. This configuration object augments the lldpV2LocVlanEntry, therefore it is only present along with the VLAN Name instance contained in the associated lldpV2LocVlanNameEntry entry. Each active lldpV2Xdot1ConfigVlanNameEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocVlanNameEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.2.1not-accessiblecurrent
lldpV2Xdot1ConfigVlanNameTxEnable
OBJECT-TYPE
The boolean value that indicates whether the corresponding Local System VLAN name instance is transmitted on the port defined by the given lldpV2Xdot1LocVlanNameEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.2.1.1TruthValueread-writecurrent
lldpV2Xdot1ConfigProtoVlanTable
OBJECT-TYPE
The table that controls selection of LLDP Port And Protocol VLAN ID TLV instances to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.1.1.3not-accessiblecurrent
lldpV2Xdot1ConfigProtoVlanEntry
OBJECT-TYPE
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol VLAN instance is transmitted. This configuration object augments the lldpV2Xdot1LocVlanEntry, therefore it is only present along with the Port and Protocol VLAN ID instance contained in the associated lldpV2Xdot1LocVlanEntry entry. Each active lldpV2Xdot1ConfigProtoVlanEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocProtoVlanEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1not-accessiblecurrent
lldpV2Xdot1ConfigProtoVlanTxEnable
OBJECT-TYPE
The boolean value that indicates whether the corresponding Local System Port and Protocol VLAN instance is transmitted on the port defined by the given lldpV2Xdot1LocProtoVlanEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1TruthValueread-writecurrent
lldpV2Xdot1ConfigProtocolTable
OBJECT-TYPE
The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.1.1.4not-accessiblecurrent
lldpV2Xdot1ConfigProtocolEntry
OBJECT-TYPE
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance is transmitted. This configuration object augments the lldpV2Xdot1LocProtoEntry, therefore it is only present along with the Protocol instance contained in the associated lldpV2Xdot1LocProtoEntry entry. Each active lldpV2Xdot1ConfigProtocolEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocProtocolEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.4.1not-accessiblecurrent
lldpV2Xdot1ConfigProtocolTxEnable
OBJECT-TYPE
The boolean value that indicates whether the corresponding Local System Protocol Identity instance is transmitted on the port defined by the given lldpV2Xdot1LocProtocolEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.4.1.1TruthValueread-writecurrent
lldpV2Xdot1ConfigVidUsageDigestTable
OBJECT-TYPE
A table that controls selection of LLDP VID Usage Digest TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.1.1.5not-accessiblecurrent
lldpV2Xdot1ConfigVidUsageDigestEntry
OBJECT-TYPE
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system VID Usage Digest instance will be transmitted. This configuration object augments the lldpLocVidUsageDigestEntry, therefore it is only present along with the VID Usage Digest instance contained in the associated lldpV2Xdot1LocVidUsageDigestEntry entry. Each active lldpConfigVidUsageDigestEntry must be restored from non-volatile storage and re-created (along with the corresponding lldpV2Xdot1LocVidUsageDigestEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.5.1not-accessiblecurrent
lldpV2Xdot1ConfigVidUsageDigestTxEnable
OBJECT-TYPE
The boolean value that indicates whether the corresponding Local System VID Usage Digest instance will be transmitted on the port defined by the given lldpV2Xdot1LocVidUsageDigestEntry. The value of this object must be restored from non-volatile storage after a reinitialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.5.1.1TruthValueread-writecurrent
lldpV2Xdot1ConfigManVidTable
OBJECT-TYPE
A table that controls selection of LLDP Management VID TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.1.1.6not-accessiblecurrent
lldpV2Xdot1ConfigManVidEntry
OBJECT-TYPE
LLDP configuration information that specifies the set of port/destination address pairs on which the Local System Management VID will be transmitted. This configuration object augments the lldpV2Xdot1LocManVidEntry, therefore it is only present along with the Management VID contained in the associated lldpV2Xdot1LocManVidEntry entry. Each active lldpV2Xdot1ConfigManVidEntry must be restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocManVidEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.6.1not-accessiblecurrent
lldpV2Xdot1ConfigManVidTxEnable
OBJECT-TYPE
The lldpV2Xdot1ConfigManVidTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Management VID TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.1.1.6.1.1TruthValueread-writecurrent
lldpV2Xdot1LocalData
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.1.2
lldpV2Xdot1LocTable
OBJECT-TYPE
This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent.
1.3.111.2.802.1.1.13.1.5.32962.1.2.1not-accessiblecurrent
lldpV2Xdot1LocEntry
OBJECT-TYPE
Information about IEEE 802.1 organizationally defined LLDP extension.
1.3.111.2.802.1.1.13.1.5.32962.1.2.1.1not-accessiblecurrent
lldpV2Xdot1LocPortVlanId
OBJECT-TYPE
The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support Port-based VLAN operation.
1.3.111.2.802.1.1.13.1.5.32962.1.2.1.1.1Unsigned32 (0 | 1..4094)read-onlycurrent
lldpV2Xdot1LocProtoVlanTable
OBJECT-TYPE
This table contains one or more rows per Port and Protocol VLAN information about the local system.
1.3.111.2.802.1.1.13.1.5.32962.1.2.2not-accessiblecurrent
lldpV2Xdot1LocProtoVlanEntry
OBJECT-TYPE
Port and protocol VLAN ID Information about a particular port component. There may be multiple port and protocol VLANs, identified by a particular lldpV2Xdot1LocProtoVlanId, configured on the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1not-accessiblecurrent
lldpV2Xdot1LocProtoVlanId
OBJECT-TYPE
The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation.
1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.1Unsigned32 (0 | 1..4094)not-accessiblecurrent
lldpV2Xdot1LocProtoVlanSupported
OBJECT-TYPE
The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs.
1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.2TruthValueread-onlycurrent
lldpV2Xdot1LocProtoVlanEnabled
OBJECT-TYPE
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system.
1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.3TruthValueread-onlycurrent
lldpV2Xdot1LocVlanNameTable
OBJECT-TYPE
This table contains one or more rows per IEEE 802.1Q VLAN name information on the local system known to this agent.
1.3.111.2.802.1.1.13.1.5.32962.1.2.3not-accessiblecurrent
lldpV2Xdot1LocVlanNameEntry
OBJECT-TYPE
VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpV2Xdot1LocVlanId, configured on the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1not-accessiblecurrent
lldpV2Xdot1LocVlanId
OBJECT-TYPE
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible.
1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1.1VlanIdnot-accessiblecurrent
lldpV2Xdot1LocVlanName
OBJECT-TYPE
The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in IETF RFC 4363) identified with the given lldpV2Xdot1LocVlanId.
1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1.2SnmpAdminString (SIZE(1..32))read-onlycurrent
lldpV2Xdot1LocProtocolTable
OBJECT-TYPE
This table contains one or more rows per protocol identity information on the local system known to this agent.
1.3.111.2.802.1.1.13.1.5.32962.1.2.4not-accessiblecurrent
lldpV2Xdot1LocProtocolEntry
OBJECT-TYPE
Information about particular protocols that are accessible through the given port component. There may be multiple protocols, identified by particular lldpV2Xdot1ProtocolIndex, lldpV2LocPortIfIndex
1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1not-accessiblecurrent
lldpV2Xdot1LocProtocolIndex
OBJECT-TYPE
This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
lldpV2Xdot1LocProtocolId
OBJECT-TYPE
The octet string value used to identify the protocols associated with the given port of the local system.
1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1.2OCTET STRING (SIZE(1..255))read-onlycurrent
lldpV2Xdot1LocVidUsageDigestTable
OBJECT-TYPE
This table contains one row per ifIndex/ destination MAC address pair for usage digest information on the local system known to this agent.
1.3.111.2.802.1.1.13.1.5.32962.1.2.5not-accessiblecurrent
lldpV2Xdot1LocVidUsageDigestEntry
OBJECT-TYPE
Usage digest information to be transmitted through the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.2.5.1not-accessiblecurrent
lldpV2Xdot1LocVidUsageDigest
OBJECT-TYPE
The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE) and otherwise contains the value NON-PBB-TE-USAGE (binary 0).
1.3.111.2.802.1.1.13.1.5.32962.1.2.5.1.1Unsigned32read-onlycurrent
lldpV2Xdot1LocManVidTable
OBJECT-TYPE
This table contains one row per ifIndex/ destination MAC address pair for usage digest information on the local system known to this agent.
1.3.111.2.802.1.1.13.1.5.32962.1.2.6not-accessiblecurrent
lldpV2Xdot1LocManVidEntry
OBJECT-TYPE
Usage digest information to be transmitted through the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.2.6.1not-accessiblecurrent
lldpV2Xdot1LocManVid
OBJECT-TYPE
The integer value configured on the Local system for the Management VID, or the value 0 if a Management VID has not been provisioned.
1.3.111.2.802.1.1.13.1.5.32962.1.2.6.1.1Unsigned32 (0 | 1..4094)read-onlycurrent
lldpV2Xdot1LocLinkAggTable
OBJECT-TYPE
This table contains one row per port of link aggregation information (as a part of the LLDP 802.1 organizational extension) on the local system known to this agent.
1.3.111.2.802.1.1.13.1.5.32962.1.2.7not-accessiblecurrent
lldpV2Xdot1LocLinkAggEntry
OBJECT-TYPE
Link Aggregation information about a particular port component.
1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1not-accessiblecurrent
lldpV2Xdot1LocLinkAggStatus
OBJECT-TYPE
The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1.1LldpV2XLinkAggStatusMapread-onlycurrent
lldpV2Xdot1LocLinkAggPortId
OBJECT-TYPE
This object contains the IEEE 802.1 aggregated port identifier, aAggPortID (IEEE Std 802.1AX, 6.3.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and/or it does not support link aggregation, this value should be set to zero.
1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1.2Unsigned32 (0 | 1..2147483647)read-onlycurrent
lldpV2Xdot1RemoteData
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.1.3
lldpV2Xdot1RemTable
OBJECT-TYPE
This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpV2Xdot1RemEntry is present for each local port, or it may choose to maintain multiple lldpV2Xdot1RemEntries for the same local port.
1.3.111.2.802.1.1.13.1.5.32962.1.3.1not-accessiblecurrent
lldpV2Xdot1RemEntry
OBJECT-TYPE
Information about a particular port component.
1.3.111.2.802.1.1.13.1.5.32962.1.3.1.1not-accessiblecurrent
lldpV2Xdot1RemPortVlanId
OBJECT-TYPE
The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support Port-based VLAN operation, the value of lldpV2Xdot1RemPortVlanId should be zero.
1.3.111.2.802.1.1.13.1.5.32962.1.3.1.1.1Unsigned32 (0 | 1..4094)read-onlycurrent
lldpV2Xdot1RemProtoVlanTable
OBJECT-TYPE
This table contains one or more rows per Port and Protocol VLAN information about the remote system, received on the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.3.2not-accessiblecurrent
lldpV2Xdot1RemProtoVlanEntry
OBJECT-TYPE
Port and protocol VLAN name Information about a particular port component. There may be multiple protocol VLANs, identified by a particular lldpV2Xdot1RemProtoVlanId, configured on the remote system.
1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1not-accessiblecurrent
lldpV2Xdot1RemProtoVlanId
OBJECT-TYPE
The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port is not enabled with any port and protocol VLAN, the value of lldpV2Xdot1RemProtoVlanId should be zero.
1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.1Unsigned32 (0 | 1..4094)not-accessiblecurrent
lldpV2Xdot1RemProtoVlanSupported
OBJECT-TYPE
The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs.
1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.2TruthValueread-onlycurrent
lldpV2Xdot1RemProtoVlanEnabled
OBJECT-TYPE
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system.
1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.3TruthValueread-onlycurrent
lldpV2Xdot1RemVlanNameTable
OBJECT-TYPE
This table contains one or more rows per IEEE 802.1Q VLAN name information about the remote system, received on the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.3.3not-accessiblecurrent
lldpV2Xdot1RemVlanNameEntry
OBJECT-TYPE
VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpV2Xdot1RemVlanId, received on the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1not-accessiblecurrent
lldpV2Xdot1RemVlanId
OBJECT-TYPE
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible.
1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1.1VlanIdnot-accessiblecurrent
lldpV2Xdot1RemVlanName
OBJECT-TYPE
The string value used to identify VLAN name identified by the VLAN Id associated with the remote system.
1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1.2SnmpAdminString (SIZE(1..32))read-onlycurrent
lldpV2Xdot1RemProtocolTable
OBJECT-TYPE
This table contains one or more rows per protocol information about the remote system, received on the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.3.4not-accessiblecurrent
lldpV2Xdot1RemProtocolEntry
OBJECT-TYPE
Protocol information about a particular port component. There may be multiple protocols, identified by a particular lldpV2Xdot1ProtocolIndex, received on the given port.
1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1not-accessiblecurrent
lldpV2Xdot1RemProtocolIndex
OBJECT-TYPE
This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
lldpV2Xdot1RemProtocolId
OBJECT-TYPE
The octet string value used to identify the protocols associated with the given port of remote system.
1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1.2OCTET STRING (SIZE(1..255))read-onlycurrent
lldpV2Xdot1RemVidUsageDigestTable
OBJECT-TYPE
This table contains one row per ifIndex/ destination MAC address pair for usage digest information received by the local system.
1.3.111.2.802.1.1.13.1.5.32962.1.3.5not-accessibledeprecated
lldpV2Xdot1RemVidUsageDigestEntry
OBJECT-TYPE
Usage digest information received on the given port/destination address pair.
1.3.111.2.802.1.1.13.1.5.32962.1.3.5.1not-accessibledeprecated
lldpV2Xdot1RemVidUsageDigest
OBJECT-TYPE
The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE)and otherwise contains the value NON-PBB-TE-USAGE (binary 0).
1.3.111.2.802.1.1.13.1.5.32962.1.3.5.1.1Unsigned32read-onlydeprecated
lldpV2Xdot1RemManVidTable
OBJECT-TYPE
This table contains one row per ifIndex/ destination MAC address pair for management VID information received from remote systems.
1.3.111.2.802.1.1.13.1.5.32962.1.3.6not-accessibledeprecated
lldpV2Xdot1RemManVidEntry
OBJECT-TYPE
Management VID information received through the given port/destination address pair.
1.3.111.2.802.1.1.13.1.5.32962.1.3.6.1not-accessibledeprecated
lldpV2Xdot1RemManVid
OBJECT-TYPE
The integer value configured on a system for the Management VID, or the value 0 if a Management VID has not been provisioned.
1.3.111.2.802.1.1.13.1.5.32962.1.3.6.1.1Unsigned32 (0 | 1..4094)read-onlydeprecated
lldpV2Xdot1RemLinkAggTable
OBJECT-TYPE
This table contains port link aggregation information (as a part of the LLDP IEEE 802.1 organizational extension) of the remote system.
1.3.111.2.802.1.1.13.1.5.32962.1.3.7not-accessiblecurrent
lldpV2Xdot1RemLinkAggEntry
OBJECT-TYPE
Link Aggregation information about remote system's port component.
1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1not-accessiblecurrent
lldpV2Xdot1RemLinkAggStatus
OBJECT-TYPE
The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1.1LldpV2XLinkAggStatusMapread-onlycurrent
lldpV2Xdot1RemLinkAggPortId
OBJECT-TYPE
This object contains the IEEE 802.1 aggregated port identifier, aAggPortID (IEEE Std 802.1AX, 6.3.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and/or it does not support link aggregation, this value should be zero.
1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1.2Unsigned32 (0 | 1..2147483647)read-onlycurrent
lldpV2Xdot1RemVidUsageDigestV2Table
OBJECT-TYPE
This table contains one row per ifIndex/ destination MAC address pair for usage digest information received by the local system.
1.3.111.2.802.1.1.13.1.5.32962.1.3.8not-accessiblecurrent
lldpV2Xdot1RemVidUsageDigestV2Entry
OBJECT-TYPE
Usage digest information received on the given port/destination address pair.
1.3.111.2.802.1.1.13.1.5.32962.1.3.8.1not-accessiblecurrent
lldpV2Xdot1RemVidUsageDigestV2
OBJECT-TYPE
The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE)and otherwise contains the value NON-PBB-TE-USAGE (binary 0).
1.3.111.2.802.1.1.13.1.5.32962.1.3.8.1.1Unsigned32read-onlycurrent
lldpV2Xdot1RemManVidV2Table
OBJECT-TYPE
This table contains one row per ifIndex/ destination MAC address pair for management VID information received from remote systems.
1.3.111.2.802.1.1.13.1.5.32962.1.3.9not-accessiblecurrent
lldpV2Xdot1RemManVidV2Entry
OBJECT-TYPE
Management VID information received through the given port/destination address pair.
1.3.111.2.802.1.1.13.1.5.32962.1.3.9.1not-accessiblecurrent
lldpV2Xdot1RemManVidV2
OBJECT-TYPE
The integer value configured on a system for the Management VID, or the value 0 if a Management VID has not been provisioned.
1.3.111.2.802.1.1.13.1.5.32962.1.3.9.1.1Unsigned32 (0 | 1..4094)read-onlycurrent
lldpV2Xdot1Conformance
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.2
lldpV2Xdot1Compliances
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.2.1
lldpV2Xdot1Groups
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.2.2
lldpXdot1CnMIB
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.3
lldpXdot1CnObjects
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.3.1
lldpXdot1CnConfig
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.3.1.1
lldpXdot1CnConfigCnTable
OBJECT-TYPE
A table that controls selection of Congestion Notification TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1not-accessiblecurrent
lldpXdot1CnConfigCnEntry
OBJECT-TYPE
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Congestion Notification TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1.1not-accessiblecurrent
lldpXdot1CnConfigCnTxEnable
OBJECT-TYPE
The lldpXdot1CnConfigCnTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Congestion Notification TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1.1.1TruthValueread-writecurrent
lldpXdot1CnLocalData
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.3.1.2
lldpV2Xdot1LocCnTable
OBJECT-TYPE
This table contains one row per port of Congestion Notification information (as a part of the LLDP 802.1 organizational extension) on the local system known to this agent.
1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1not-accessiblecurrent
lldpV2Xdot1LocCnEntry
OBJECT-TYPE
Congestion Notification information about a particular port component.
1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1not-accessiblecurrent
lldpV2Xdot1LocCNPVIndicators
OBJECT-TYPE
This object contains the CNPV indicators for the Port.
1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1.1LldpV2CnBitVectorread-onlycurrent
lldpV2Xdot1LocReadyIndicators
OBJECT-TYPE
This object contains the Ready indicators for the Port.
1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1.2LldpV2CnBitVectorread-onlycurrent
lldpXdot1CnRemoteData
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.3.1.3
lldpV2Xdot1RemCnTable
OBJECT-TYPE
This table contains Congestion Notification information (as a part of the LLDP IEEE 802.1 organizational extension) of the remote system.
1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1not-accessiblecurrent
lldpV2Xdot1RemCnEntry
OBJECT-TYPE
Port Extension information about remote systems port component.
1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1not-accessiblecurrent
lldpV2Xdot1RemCNPVIndicators
OBJECT-TYPE
This object contains the CNPV indicators for the Port.
1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1.1LldpV2CnBitVectorread-onlycurrent
lldpV2Xdot1RemReadyIndicators
OBJECT-TYPE
This object contains the Ready indicators for the Port.
1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1.2LldpV2CnBitVectorread-onlycurrent
lldpXdot1CnConformance
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.4
lldpXdot1CnCompliances
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.4.1
lldpXdot1CnGroups
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.4.2
lldpXdot1dcbxMIB
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5
lldpXdot1dcbxObjects
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1
lldpXdot1dcbxConfig
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.1
lldpXdot1dcbxConfigETSConfigurationTable
OBJECT-TYPE
A table that controls selection of ETS Configuration TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1not-accessiblecurrent
lldpXdot1dcbxConfigETSConfigurationEntry
OBJECT-TYPE
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined ETS Configuration TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1.1not-accessiblecurrent
lldpXdot1dcbxConfigETSConfigurationTxEnable
OBJECT-TYPE
The lldpXdot1dcbxConfigETSConfigurationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Configuration TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1.1.1TruthValueread-writecurrent
lldpXdot1dcbxConfigETSRecommendationTable
OBJECT-TYPE
A table that controls selection of ETS Recommendation TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2not-accessiblecurrent
lldpXdot1dcbxConfigETSRecommendationEntry
OBJECT-TYPE
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined ETS Recommendation TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2.1not-accessiblecurrent
lldpXdot1dcbxConfigETSRecommendationTxEnable
OBJECT-TYPE
The lldpXdot1dcbxConfigETSRecommendationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Recommendation TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2.1.1TruthValueread-writecurrent
lldpXdot1dcbxConfigPFCTable
OBJECT-TYPE
A table that controls selection of Priority-based Flow Control Configuration TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3not-accessiblecurrent
lldpXdot1dcbxConfigPFCEntry
OBJECT-TYPE
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Priority-based Flow Control Configuration TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3.1not-accessiblecurrent
lldpXdot1dcbxConfigPFCTxEnable
OBJECT-TYPE
The lldpXdot1dcbxConfigPFCTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Priority-based Flow Control Configuration TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3.1.1TruthValueread-writecurrent
lldpXdot1dcbxConfigApplicationPriorityTable
OBJECT-TYPE
A table that controls selection of Priority-based Flow Control Configuration TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4not-accessiblecurrent
lldpXdot1dcbxConfigApplicationPriorityEntry
OBJECT-TYPE
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Application Priority TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4.1not-accessiblecurrent
lldpXdot1dcbxConfigApplicationPriorityTxEnable
OBJECT-TYPE
The lldpXdot1dcbxConfigApplicationPriorityTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Application Priority TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4.1.1TruthValueread-writecurrent
lldpXdot1dcbxConfigApplicationVlanTable
OBJECT-TYPE
A table that controls selection of Application VLAN TLVs to be transmitted on individual ports.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5not-accessiblecurrent
lldpXdot1dcbxConfigApplicationVlanEntry
OBJECT-TYPE
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Application VLAN TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5.1not-accessiblecurrent
lldpXdot1dcbxConfigApplicationVlanTxEnable
OBJECT-TYPE
The lldpXdot1dcbxConfigApplicationVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Application VLAN TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5.1.1TruthValueread-writecurrent
lldpXdot1dcbxLocalData
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.2
lldpXdot1dcbxLocETSConfiguration
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1
lldpXdot1dcbxLocETSBasicConfigurationTable
OBJECT-TYPE
This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1not-accessiblecurrent
lldpXdot1dcbxLocETSBasicConfigurationEntry
OBJECT-TYPE
Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1not-accessiblecurrent
lldpXdot1dcbxLocETSConCreditBasedShaperSupport
OBJECT-TYPE
Indicates if the credit-based shaper Traffic Selection Algorithm is supported on the local system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.1TruthValueread-onlycurrent
lldpXdot1dcbxLocETSConTrafficClassesSupported
OBJECT-TYPE
Indicates the number of traffic classes supported.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.2LldpXdot1dcbxSupportedCapacityread-onlycurrent
lldpXdot1dcbxLocETSConWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the ETS configuration recommended by the remote system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.3TruthValueread-onlycurrent
lldpXdot1dcbxLocETSConPriorityAssignmentTable
OBJECT-TYPE
This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2not-accessiblecurrent
lldpXdot1dcbxLocETSConPriorityAssignmentEntry
OBJECT-TYPE
Indicates a priority to traffic class assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1not-accessiblecurrent
lldpXdot1dcbxLocETSConPriority
OBJECT-TYPE
Indicates the priority that is assigned to a traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1.1IEEE8021PriorityValuenot-accessiblecurrent
lldpXdot1dcbxLocETSConPriTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this priority is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1.2LldpXdot1dcbxTrafficClassValueread-onlycurrent
lldpXdot1dcbxLocETSConTrafficClassBandwidthTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3not-accessiblecurrent
lldpXdot1dcbxLocETSConTrafficClassBandwidthEntry
OBJECT-TYPE
Indicates a traffic class to Bandwidth assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1not-accessiblecurrent
lldpXdot1dcbxLocETSConTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this bandwidth applies
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxLocETSConTrafficClassBandwidth
OBJECT-TYPE
Indicates the bandwidth assigned to this traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1.2LldpXdot1dcbxTrafficClassBandwidthValueread-onlycurrent
lldpXdot1dcbxLocETSConTrafficSelectionAlgorithmTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4not-accessiblecurrent
lldpXdot1dcbxLocETSConTrafficSelectionAlgorithmEntry
OBJECT-TYPE
Indicates a traffic class to traffic selection algorithm assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1not-accessiblecurrent
lldpXdot1dcbxLocETSConTSATrafficClass
OBJECT-TYPE
Indicates the traffic class that is assigned to a traffic selection algorithm.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxLocETSConTrafficSelectionAlgorithm
OBJECT-TYPE
Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1.2LldpXdot1dcbxTrafficSelectionAlgorithmread-onlycurrent
lldpXdot1dcbxLocETSReco
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2
lldpXdot1dcbxLocETSRecoTrafficClassBandwidthTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1not-accessiblecurrent
lldpXdot1dcbxLocETSRecoTrafficClassBandwidthEntry
OBJECT-TYPE
Indicates a traffic class to Bandwidth assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1not-accessiblecurrent
lldpXdot1dcbxLocETSRecoTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this bandwidth applies
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxLocETSRecoTrafficClassBandwidth
OBJECT-TYPE
Indicates the bandwidth assigned to this traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1.2LldpXdot1dcbxTrafficClassBandwidthValueread-onlycurrent
lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmTable
OBJECT-TYPE
This table contains one row per priority. The entry in each row indicates the traffic selction algorithm to be used by the traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2not-accessiblecurrent
lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmEntry
OBJECT-TYPE
Indicates a priority to traffic selection algorithm assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1not-accessiblecurrent
lldpXdot1dcbxLocETSRecoTSATrafficClass
OBJECT-TYPE
Indicates the traffic class that is assigned to a traffic selection algorithm.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithm
OBJECT-TYPE
Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1.2LldpXdot1dcbxTrafficSelectionAlgorithmread-onlycurrent
lldpXdot1dcbxLocPFC
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3
lldpXdot1dcbxLocPFCBasicTable
OBJECT-TYPE
This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1not-accessiblecurrent
lldpXdot1dcbxLocPFCBasicEntry
OBJECT-TYPE
Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1not-accessiblecurrent
lldpXdot1dcbxLocPFCWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the PFC configuration of the remote system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.1TruthValueread-onlycurrent
lldpXdot1dcbxLocPFCMBC
OBJECT-TYPE
Indicates if the local system is capable of bypassing MACsec processing when MACsec is disabled.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.2TruthValueread-onlycurrent
lldpXdot1dcbxLocPFCCap
OBJECT-TYPE
Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.3LldpXdot1dcbxSupportedCapacityread-onlycurrent
lldpXdot1dcbxLocPFCEnableTable
OBJECT-TYPE
This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2not-accessiblecurrent
lldpXdot1dcbxLocPFCEnableEntry
OBJECT-TYPE
Each entry indicates if PFC is enabled on the correponding priority
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1not-accessiblecurrent
lldpXdot1dcbxLocPFCEnablePriority
OBJECT-TYPE
Prioity for which PFC is enabled / disabled
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1.1IEEE8021PriorityValuenot-accessiblecurrent
lldpXdot1dcbxLocPFCEnableEnabled
OBJECT-TYPE
Indicates if PFC is enabled on the corresponding priority
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1.2TruthValueread-onlycurrent
lldpXdot1dcbxLocApplicationPriorityAppTable
OBJECT-TYPE
Table containing entries indicating the priorty to be used for a given application
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4not-accessiblecurrent
lldpXdot1dcbxLocApplicationPriorityAppEntry
OBJECT-TYPE
Entry that indicates the priority to be used for a given application.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1not-accessiblecurrent
lldpXdot1dcbxLocApplicationPriorityAESelector
OBJECT-TYPE
Indicates the contents of the protocol object (lldpXdot1dcbxLocApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.)
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.1LldpXdot1dcbxAppSelectornot-accessiblecurrent
lldpXdot1dcbxLocApplicationPriorityAEProtocol
OBJECT-TYPE
The protocol indicator of the type indicated by lldpXdot1dcbxLocApplicationPriorityAESelector.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.2LldpXdot1dcbxAppProtocolnot-accessiblecurrent
lldpXdot1dcbxLocApplicationPriorityAEPriority
OBJECT-TYPE
The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxLocApplicationPriorityAESelector and lldpXdot1dcbxLocApplicationPriorityAEProtocol
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.3IEEE8021PriorityValueread-onlycurrent
lldpXdot1dcbxLocApplicationVlanAppTable
OBJECT-TYPE
Table containing entries indicating the VLAN to be used for a given application
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5not-accessiblecurrent
lldpXdot1dcbxLocApplicationVlanAppEntry
OBJECT-TYPE
Entry that indicates the VLAN to be used for a given application.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1not-accessiblecurrent
lldpXdot1dcbxLocApplicationVlanAESelector
OBJECT-TYPE
Indicates the contents of the protocol object (lldpXdot1dcbxLocApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.)
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.1LldpXdot1dcbxAppSelectornot-accessiblecurrent
lldpXdot1dcbxLocApplicationVlanAEProtocol
OBJECT-TYPE
The protocol indicator of the type indicated by lldpXdot1dcbxLocApplicationVlanAESelector.
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.2LldpXdot1dcbxAppProtocolnot-accessiblecurrent
lldpXdot1dcbxLocApplicationVlanAEVlanId
OBJECT-TYPE
The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxLocApplicationVlanAESelector and lldpXdot1dcbxLocApplicationVlanAEProtocol
1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.3VlanIdread-onlycurrent
lldpXdot1dcbxRemoteData
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.3
lldpXdot1dcbxRemETSConfiguration
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1
lldpXdot1dcbxRemETSBasicConfigurationTable
OBJECT-TYPE
This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1not-accessiblecurrent
lldpXdot1dcbxRemETSBasicConfigurationEntry
OBJECT-TYPE
Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1not-accessiblecurrent
lldpXdot1dcbxRemETSConCreditBasedShaperSupport
OBJECT-TYPE
Indicates if the credit-based shaper Traffic Selection algorithm is supported on the remote system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.1TruthValueread-onlycurrent
lldpXdot1dcbxRemETSConTrafficClassesSupported
OBJECT-TYPE
Indicates the number of traffic classes supported.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.2LldpXdot1dcbxSupportedCapacityread-onlycurrent
lldpXdot1dcbxRemETSConWilling
OBJECT-TYPE
Indicates if the remote system is willing to accept the ETS configuration recommended by the remote system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.3TruthValueread-onlycurrent
lldpXdot1dcbxRemETSConPriorityAssignmentTable
OBJECT-TYPE
This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2not-accessiblecurrent
lldpXdot1dcbxRemETSConPriorityAssignmentEntry
OBJECT-TYPE
Indicates a priority to traffic class assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1not-accessiblecurrent
lldpXdot1dcbxRemETSConPriority
OBJECT-TYPE
Indicates the priority that is assigned to a traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1.1IEEE8021PriorityValuenot-accessiblecurrent
lldpXdot1dcbxRemETSConPriTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this priority is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1.2LldpXdot1dcbxTrafficClassValueread-onlycurrent
lldpXdot1dcbxRemETSConTrafficClassBandwidthTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3not-accessiblecurrent
lldpXdot1dcbxRemETSConTrafficClassBandwidthEntry
OBJECT-TYPE
Indicates a traffic class to Bandwidth assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1not-accessiblecurrent
lldpXdot1dcbxRemETSConTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this bandwidth applies
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxRemETSConTrafficClassBandwidth
OBJECT-TYPE
Indicates the bandwidth assigned to this traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1.2LldpXdot1dcbxTrafficClassBandwidthValueread-onlycurrent
lldpXdot1dcbxRemETSConTrafficSelectionAlgorithmTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4not-accessiblecurrent
lldpXdot1dcbxRemETSConTrafficSelectionAlgorithmEntry
OBJECT-TYPE
Indicates a traffic class to traffic selection algorithm assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1not-accessiblecurrent
lldpXdot1dcbxRemETSConTSATrafficClass
OBJECT-TYPE
Indicates the traffic class that is assigned to a traffic selection algorithm.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxRemETSConTrafficSelectionAlgorithm
OBJECT-TYPE
Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1.2LldpXdot1dcbxTrafficSelectionAlgorithmread-onlycurrent
lldpXdot1dcbxRemETSReco
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2
lldpXdot1dcbxRemETSRecoTrafficClassBandwidthTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1not-accessiblecurrent
lldpXdot1dcbxRemETSRecoTrafficClassBandwidthEntry
OBJECT-TYPE
Indicates a traffic class to Bandwidth assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1not-accessiblecurrent
lldpXdot1dcbxRemETSRecoTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this bandwidth applies
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxRemETSRecoTrafficClassBandwidth
OBJECT-TYPE
Indicates the bandwidth assigned to this traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1.2LldpXdot1dcbxTrafficClassBandwidthValueread-onlycurrent
lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the priority.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2not-accessiblecurrent
lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmEntry
OBJECT-TYPE
Indicates a priority to traffic selection algorithm assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1not-accessiblecurrent
lldpXdot1dcbxRemETSRecoTSATrafficClass
OBJECT-TYPE
Indicates the traffic class that is assigned to a traffic selection algorithm.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithm
OBJECT-TYPE
Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1.2LldpXdot1dcbxTrafficSelectionAlgorithmread-onlycurrent
lldpXdot1dcbxRemPFC
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3
lldpXdot1dcbxRemPFCBasicTable
OBJECT-TYPE
This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1not-accessiblecurrent
lldpXdot1dcbxRemPFCBasicEntry
OBJECT-TYPE
Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1not-accessiblecurrent
lldpXdot1dcbxRemPFCWilling
OBJECT-TYPE
Indicates if the remote system is willing to accept the PFC configuration of the local system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.1TruthValueread-onlycurrent
lldpXdot1dcbxRemPFCMBC
OBJECT-TYPE
Indicates if the remote system is capable of bypassing MACsec processing when MACsec is disabled.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.2TruthValueread-onlycurrent
lldpXdot1dcbxRemPFCCap
OBJECT-TYPE
Indicates the number of traffic classes on the remote device that may simultaneously have PFC enabled.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.3LldpXdot1dcbxSupportedCapacityread-onlycurrent
lldpXdot1dcbxRemPFCEnableTable
OBJECT-TYPE
This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2not-accessiblecurrent
lldpXdot1dcbxRemPFCEnableEntry
OBJECT-TYPE
Each entry indicates if PFC is enabled on the correponding priority
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1not-accessiblecurrent
lldpXdot1dcbxRemPFCEnablePriority
OBJECT-TYPE
Prioity for which PFC is enabled / disabled
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1.1IEEE8021PriorityValuenot-accessiblecurrent
lldpXdot1dcbxRemPFCEnableEnabled
OBJECT-TYPE
Indicates if PFC is enabled on the corresponding priority
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1.2TruthValueread-onlycurrent
lldpXdot1dcbxRemApplicationPriorityAppTable
OBJECT-TYPE
Table containing entries indicating the priorty to be used for a given application
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4not-accessiblecurrent
lldpXdot1dcbxRemApplicationPriorityAppEntry
OBJECT-TYPE
Entry that indicates the priority to be used for a given application.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1not-accessiblecurrent
lldpXdot1dcbxRemApplicationPriorityAESelector
OBJECT-TYPE
Indicates the contents of the protocol object (lldpXdot1dcbxRemApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.)
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.1LldpXdot1dcbxAppSelectornot-accessiblecurrent
lldpXdot1dcbxRemApplicationPriorityAEProtocol
OBJECT-TYPE
The protocol indicator of the type indicated by lldpXdot1dcbxRemApplicationPriorityAESelector.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.2LldpXdot1dcbxAppProtocolnot-accessiblecurrent
lldpXdot1dcbxRemApplicationPriorityAEPriority
OBJECT-TYPE
The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxRemApplicationPriorityAESelector and lldpXdot1dcbxRemApplicationPriorityAEProtocol
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.3IEEE8021PriorityValueread-onlycurrent
lldpXdot1dcbxRemApplicationVlanAppTable
OBJECT-TYPE
Table containing entries indicating the VLAN to be used for a given application
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5not-accessiblecurrent
lldpXdot1dcbxRemApplicationVlanAppEntry
OBJECT-TYPE
Entry that indicates the VLAN to be used for a given application.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1not-accessiblecurrent
lldpXdot1dcbxRemApplicationVlanAESelector
OBJECT-TYPE
Indicates the contents of the protocol object (lldpXdot1dcbxRemApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.)
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.1LldpXdot1dcbxAppSelectornot-accessiblecurrent
lldpXdot1dcbxRemApplicationVlanAEProtocol
OBJECT-TYPE
The protocol indicator of the type indicated by lldpXdot1dcbxRemApplicationVlanAESelector.
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.2LldpXdot1dcbxAppProtocolnot-accessiblecurrent
lldpXdot1dcbxRemApplicationVlanAEVlanId
OBJECT-TYPE
The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxRemApplicationVlanAESelector and lldpXdot1dcbxRemApplicationVlanAEProtocol
1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.3VlanIdread-onlycurrent
lldpXdot1dcbxAdminData
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.4
lldpXdot1dcbxAdminETSConfiguration
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1
lldpXdot1dcbxAdminETSBasicConfigurationTable
OBJECT-TYPE
This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1not-accessiblecurrent
lldpXdot1dcbxAdminETSBasicConfigurationEntry
OBJECT-TYPE
Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1not-accessiblecurrent
lldpXdot1dcbxAdminETSConCreditBasedShaperSupport
OBJECT-TYPE
Indicates support for the credit-based shaper Traffic Selection Algorithm.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.1TruthValueread-onlycurrent
lldpXdot1dcbxAdminETSConTrafficClassesSupported
OBJECT-TYPE
Indicates the number of traffic classes supported.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.2LldpXdot1dcbxSupportedCapacityread-onlycurrent
lldpXdot1dcbxAdminETSConWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the ETS configuration recommended by the remote system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.3TruthValueread-writecurrent
lldpXdot1dcbxAdminETSConPriorityAssignmentTable
OBJECT-TYPE
This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2not-accessiblecurrent
lldpXdot1dcbxAdminETSConPriorityAssignmentEntry
OBJECT-TYPE
Indicates a priority to traffic class assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1not-accessiblecurrent
lldpXdot1dcbxAdminETSConPriority
OBJECT-TYPE
Indicates the priority that is assigned to a traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1.1IEEE8021PriorityValuenot-accessiblecurrent
lldpXdot1dcbxAdminETSConPriTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this priority is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1.2LldpXdot1dcbxTrafficClassValueread-writecurrent
lldpXdot1dcbxAdminETSConTrafficClassBandwidthTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3not-accessiblecurrent
lldpXdot1dcbxAdminETSConTrafficClassBandwidthEntry
OBJECT-TYPE
Indicates a traffic class to Bandwidth assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1not-accessiblecurrent
lldpXdot1dcbxAdminETSConTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this bandwidth applies
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxAdminETSConTrafficClassBandwidth
OBJECT-TYPE
Indicates the bandwidth assigned to this traffic class. The sum of the bandwidths assigned to a given port is required at all times to eqaul 100. An operation that attempts to change this table such that the bandwidth entires do not total 100 shall be rejected. An implication of this is that modification of this table requires that multiple set operations be included in a single SNMP PDU, commonly referred to as an MSET operation, to perform simultaneous set operations to keep the sum at 100. Any attempt to change a single entry in this table will result in the operation being rejected since entries in the table referring to the given port will no longer sum to 100.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2LldpXdot1dcbxTrafficClassBandwidthValueread-writecurrent
lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the priority.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4not-accessiblecurrent
lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmEntry
OBJECT-TYPE
Indicates a traffic class to traffic selection algorithm assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1not-accessiblecurrent
lldpXdot1dcbxAdminETSConTSATrafficClass
OBJECT-TYPE
Indicates the traffic class that is assigned to a traffic selection algorithm.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithm
OBJECT-TYPE
Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1.2LldpXdot1dcbxTrafficSelectionAlgorithmread-writecurrent
lldpXdot1dcbxAdminETSReco
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2
lldpXdot1dcbxAdminETSRecoTrafficClassBandwidthTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1not-accessiblecurrent
lldpXdot1dcbxAdminETSRecoTrafficClassBandwidthEntry
OBJECT-TYPE
Indicates a traffic class to Bandwidth assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1not-accessiblecurrent
lldpXdot1dcbxAdminETSRecoTrafficClass
OBJECT-TYPE
Indicates the traffic class to which this bandwidth applies
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxAdminETSRecoTrafficClassBandwidth
OBJECT-TYPE
Indicates the bandwidth assigned to this traffic class. The sum of the bandwidths assigned to a given port is required at all times to eqaul 100. An operation that attempts to change this table such that the bandwidth entires do not total 100 shall be rejected. An implication of this is that modification of this table requires that multiple set operations be included in a single SNMP PDU, commonly referred to as an MSET operation, to perform simultaneous set operations to keep the sum at 100. Any attempt to change a single entry in this table will result in the operation being rejected since entries in the table referring to the given port will no longer sum to 100.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1.2LldpXdot1dcbxTrafficClassBandwidthValueread-writecurrent
lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmTable
OBJECT-TYPE
This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2not-accessiblecurrent
lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmEntry
OBJECT-TYPE
Indicates a traffic class to traffic selection algorithm assignment.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1not-accessiblecurrent
lldpXdot1dcbxAdminETSRecoTSATrafficClass
OBJECT-TYPE
Indicates the traffic class that is assigned to a traffic selection algorithm.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1.1LldpXdot1dcbxTrafficClassValuenot-accessiblecurrent
lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithm
OBJECT-TYPE
Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1.2LldpXdot1dcbxTrafficSelectionAlgorithmread-writecurrent
lldpXdot1dcbxAdminPFC
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3
lldpXdot1dcbxAdminPFCBasicTable
OBJECT-TYPE
This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1not-accessiblecurrent
lldpXdot1dcbxAdminPFCBasicEntry
OBJECT-TYPE
Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1not-accessiblecurrent
lldpXdot1dcbxAdminPFCWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the PFC configuration of the remote system.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.1TruthValueread-writecurrent
lldpXdot1dcbxAdminPFCMBC
OBJECT-TYPE
Indicates if the local system is capable of bypassing MACsec processing when MACsec is disabled.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.2TruthValueread-onlycurrent
lldpXdot1dcbxAdminPFCCap
OBJECT-TYPE
Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. Note that this typically indicates a physical limitation of the device. However, some devices may allow this parameter to be administratively configured, in which case the MAX-ACCESS should be changed to read-write with and an appropriate DEFVAL added.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.3LldpXdot1dcbxSupportedCapacityread-onlycurrent
lldpXdot1dcbxAdminPFCEnableTable
OBJECT-TYPE
This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2not-accessiblecurrent
lldpXdot1dcbxAdminPFCEnableEntry
OBJECT-TYPE
Each entry indicates if PFC is enabled on the correponding priority
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1not-accessiblecurrent
lldpXdot1dcbxAdminPFCEnablePriority
OBJECT-TYPE
Prioity for which PFC is enabled / disabled
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1.1IEEE8021PriorityValuenot-accessiblecurrent
lldpXdot1dcbxAdminPFCEnableEnabled
OBJECT-TYPE
Indicates if PFC is enabled on the corresponding priority
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1.2TruthValueread-writecurrent
lldpXdot1dcbxAdminApplicationPriorityAppTable
OBJECT-TYPE
Table containing entries indicating the priorty to be used for a given application
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4not-accessiblecurrent
lldpXdot1dcbxAdminApplicationPriorityAppEntry
OBJECT-TYPE
Entry that indicates the priority to be used for a given application.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1not-accessiblecurrent
lldpXdot1dcbxAdminApplicationPriorityAESelector
OBJECT-TYPE
Indicates the contents of the protocol object (lldpXdot1dcbxAdminApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.)
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.1LldpXdot1dcbxAppSelectornot-accessiblecurrent
lldpXdot1dcbxAdminApplicationPriorityAEProtocol
OBJECT-TYPE
The protocol indicator of the type indicated by lldpXdot1dcbxAdminApplicationPriorityAESelector.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.2LldpXdot1dcbxAppProtocolnot-accessiblecurrent
lldpXdot1dcbxAdminApplicationPriorityAEPriority
OBJECT-TYPE
The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxAdminApplicationPriorityAESelector and lldpXdot1dcbxAdminApplicationPriorityAEProtocol
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.3IEEE8021PriorityValueread-createcurrent
lldpXdot1dcbxAdminApplicationVlanAppTable
OBJECT-TYPE
Table containing entries indicating the VLAN to be used for a given application
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5not-accessiblecurrent
lldpXdot1dcbxAdminApplicationVlanAppEntry
OBJECT-TYPE
Entry that indicates the VLAN to be used for a given application.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1not-accessiblecurrent
lldpXdot1dcbxAdminApplicationVlanAESelector
OBJECT-TYPE
Indicates the contents of the protocol object (lldpXdot1dcbxAdminApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.)
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.1LldpXdot1dcbxAppSelectornot-accessiblecurrent
lldpXdot1dcbxAdminApplicationVlanAEProtocol
OBJECT-TYPE
The protocol indicator of the type indicated by lldpXdot1dcbxAdminApplicationVlanAESelector.
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.2LldpXdot1dcbxAppProtocolnot-accessiblecurrent
lldpXdot1dcbxAdminApplicationVlanAEVlanId
OBJECT-TYPE
The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxAdminApplicationVlanAESelector and lldpXdot1dcbxAdminApplicationVlanAEProtocol
1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.3VlanIdread-createcurrent
lldpXdot1dcbxConformance
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.6
lldpXdot1dcbxCompliances
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.6.1
lldpXdot1dcbxGroups
OBJECT-IDENTITY
1.3.111.2.802.1.1.13.1.5.32962.6.2

Conformance

NameOIDStatus
lldpV2Xdot1TxRxCompliance
MODULE-COMPLIANCE
A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for all agents that implement the LLDP 802.1 organizational extension in TX and/or RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB.
1.3.111.2.802.1.1.13.1.5.32962.2.1.1current
lldpV2Xdot1TxCompliance
MODULE-COMPLIANCE
A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB.
1.3.111.2.802.1.1.13.1.5.32962.2.1.2current
lldpV2Xdot1RxCompliance
MODULE-COMPLIANCE
A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB.
1.3.111.2.802.1.1.13.1.5.32962.2.1.3deprecated
lldpV2Xdot1RxComplianceV2
MODULE-COMPLIANCE
A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB.
1.3.111.2.802.1.1.13.1.5.32962.2.1.4current
lldpV2Xdot1ConfigGroup
OBJECT-GROUP
The collection of objects which are used to configure the IEEE 802.1 organizationally defined LLDP extension implementation behavior for the basicSet TLV set.
1.3.111.2.802.1.1.13.1.5.32962.2.2.1current
lldpV2Xdot1LocSysGroup
OBJECT-GROUP
The collection of objects which are used to represent IEEE 802.1 organizationally defined LLDP extension associated with the Local Device Information for the basicSet TLV set.
1.3.111.2.802.1.1.13.1.5.32962.2.2.2current
lldpV2Xdot1RemSysGroup
OBJECT-GROUP
The collection of objects which are used to represent LLDP 802.1 organizational extension Remote Device Information for the basicSet TLV set.
1.3.111.2.802.1.1.13.1.5.32962.2.2.3deprecated
lldpV2Xdot1RemSysV2Group
OBJECT-GROUP
The collection of objects which are used to represent LLDP 802.1 organizational extension Remote Device Information for the basicSet TLV set.
1.3.111.2.802.1.1.13.1.5.32962.2.2.4current
lldpXdot1CnCompliance
MODULE-COMPLIANCE
A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined Congestion Notification LLDP extension MIB. This group is mandatory for agents that implement the Congestion Notification cnSet TLV set.
1.3.111.2.802.1.1.13.1.5.32962.4.1.1current
lldpXdot1CnGroup
OBJECT-GROUP
The collection of objects that support the Congestion Notification cnSet TLV set.
1.3.111.2.802.1.1.13.1.5.32962.4.2.1current
lldpXdot1dcbxCompliance
MODULE-COMPLIANCE
A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined DCBX LLDP extension MIB. This group is mandatory for agents which implement Enhanced Transmission Selection.
1.3.111.2.802.1.1.13.1.5.32962.6.1.1current
lldpXdot1dcbxETSGroup
OBJECT-GROUP
The collection of objects used for Enhanced Transmission Selection.
1.3.111.2.802.1.1.13.1.5.32962.6.2.1current
lldpXdot1dcbxPFCGroup
OBJECT-GROUP
The collection of objects used for Priority- base Flow Control.
1.3.111.2.802.1.1.13.1.5.32962.6.2.2current
lldpXdot1dcbxApplicationPriorityGroup
OBJECT-GROUP
The collection of objects used for Application priority.
1.3.111.2.802.1.1.13.1.5.32962.6.2.3current
lldpXdot1dcbxApplicationVlanGroup
OBJECT-GROUP
The collection of objects used for Application VLAN.
1.3.111.2.802.1.1.13.1.5.32962.6.2.4current