MIBs Depot

LINKSYS-rndApplications

Registered at
1.3.6.1.4.1.3955.1000.201.35
Last updated
2004-06-01 00:00
Organization
Linksys LLC.
Revisions
2004-06-01 00:00
Namespace
linksys
Source file
LINKSYS-rndApplications
Digest
sha256:82c4d10171f1fccb2814de747f354d8dba4c5dea40e286edeadfb5776a53c28d

Description

The private MIB module definition for RND applications MIB.

Contact

www.linksys.com/business/support

Imports

FromSymbols
IF-MIBInterfaceIndex, InterfaceIndexOrZero, ifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
LINKSYS-MIBrnd
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
LINKSYS-MIB
LINKSYS-rndApplications
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
PingCompletionStatus
TEXTUAL-CONVENTION
If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data.
current

Objects

NameOIDSyntaxAccessStatus
rndMidLevelManagement
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.2
rndAlarmOptions
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.2.2
rndAlarmEnabling
OBJECT-TYPE
Indicates whether alarms should be issued to the high-level NMS
1.3.6.1.4.1.3955.1000.201.35.2.2.1INTEGER {enabled(1), disabled(2)}read-writecurrent
rndAlarmInterval
OBJECT-TYPE
Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
1.3.6.1.4.1.3955.1000.201.35.2.2.2INTEGERread-writecurrent
rndMonitoredElementsTable
OBJECT-TYPE
The table of monitored elements of the network
1.3.6.1.4.1.3955.1000.201.35.2.3not-accessiblecurrent
rndMonitoredElementEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.3955.1000.201.35.2.3.1not-accessiblecurrent
rndMonitoredElementAddress
OBJECT-TYPE
The IP address of the monitored element
1.3.6.1.4.1.3955.1000.201.35.2.3.1.1IpAddressread-onlycurrent
rndMonitoredElementCommunity
OBJECT-TYPE
The community of the monitored element
1.3.6.1.4.1.3955.1000.201.35.2.3.1.2DisplayString (SIZE(1..20))read-writecurrent
rndMonitoredElementLabel
OBJECT-TYPE
The label assigned by the network manager to the monitored element
1.3.6.1.4.1.3955.1000.201.35.2.3.1.3DisplayString (SIZE(1..20))read-writecurrent
rndDefaultPollingInterval
OBJECT-TYPE
The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
1.3.6.1.4.1.3955.1000.201.35.2.3.1.4INTEGERread-writecurrent
rndDefaultLogFile
OBJECT-TYPE
The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
1.3.6.1.4.1.3955.1000.201.35.2.3.1.5DisplayStringread-writecurrent
rndMonitoredElementStatus
OBJECT-TYPE
It is used to manage the monitored elements table and indicates the current monitoring status of an element.
1.3.6.1.4.1.3955.1000.201.35.2.3.1.6RowStatusread-writecurrent
rndMonitoringTable
OBJECT-TYPE
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
1.3.6.1.4.1.3955.1000.201.35.2.4not-accessiblecurrent
rndMonitoringEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.3955.1000.201.35.2.4.1not-accessiblecurrent
rndMonitoredElement
OBJECT-TYPE
A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
1.3.6.1.4.1.3955.1000.201.35.2.4.1.1DisplayString (SIZE(1..20))read-onlycurrent
rndMonitoredObjectInstanceLabel
OBJECT-TYPE
The label assigned by the network manager to the monitored object instance
1.3.6.1.4.1.3955.1000.201.35.2.4.1.2DisplayString (SIZE(1..20))read-onlycurrent
rndMonitoredObjectName
OBJECT-TYPE
The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the <MIB module name> : <object type name> format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
1.3.6.1.4.1.3955.1000.201.35.2.4.1.3DisplayString (SIZE(0..20))read-writecurrent
rndMonitoredObjectIdentifier
OBJECT-TYPE
The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
1.3.6.1.4.1.3955.1000.201.35.2.4.1.4OBJECT IDENTIFIERread-writecurrent
rndMonitoredObjectInstance
OBJECT-TYPE
The instance identifier (key) of the monitored object instance.
1.3.6.1.4.1.3955.1000.201.35.2.4.1.5OBJECT IDENTIFIERread-writecurrent
rndMonitoredObjectSyntax
OBJECT-TYPE
The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value
1.3.6.1.4.1.3955.1000.201.35.2.4.1.6INTEGER {integer(1), octet-string(2), ip-address(3), object-identifier(4)}read-writecurrent
rndMonitoringInterval
OBJECT-TYPE
The period of time between two consecutive retrievals of the monitored object instance's value.
1.3.6.1.4.1.3955.1000.201.35.2.4.1.7INTEGERread-writecurrent
rndAlarmMaxTreshold
OBJECT-TYPE
The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
1.3.6.1.4.1.3955.1000.201.35.2.4.1.8INTEGERread-writecurrent
rndAlarmMinTreshold
OBJECT-TYPE
If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
1.3.6.1.4.1.3955.1000.201.35.2.4.1.9INTEGERread-writecurrent
rndMonitoringLogfile
OBJECT-TYPE
The entire path of the file in which the results of the monitoring of this object instance should be recorded.
1.3.6.1.4.1.3955.1000.201.35.2.4.1.10DisplayStringread-writecurrent
rndMonitoringEntryStatus
OBJECT-TYPE
It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
1.3.6.1.4.1.3955.1000.201.35.2.4.1.11RowStatusread-writecurrent
rndMonitoredIntegerInstance
OBJECT-TYPE
1.3.6.1.4.1.3955.1000.201.35.2.4.1.12INTEGERread-writecurrent
rndMibFilesTable
OBJECT-TYPE
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
1.3.6.1.4.1.3955.1000.201.35.2.5not-accessiblecurrent
rndMibFileEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.3955.1000.201.35.2.5.1not-accessiblecurrent
rndMibFileIndex
OBJECT-TYPE
The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
1.3.6.1.4.1.3955.1000.201.35.2.5.1.1INTEGERread-onlycurrent
rndMibFilePath
OBJECT-TYPE
The path of the MIB file in the MIB file server.
1.3.6.1.4.1.3955.1000.201.35.2.5.1.2DisplayStringread-writecurrent
rndMibFileRefresh
OBJECT-TYPE
Indicates if the file should be fetched after setting this entry from the MIB file server.
1.3.6.1.4.1.3955.1000.201.35.2.5.1.3INTEGER {no(1), yes(2)}read-writecurrent
rndMibFileEntryStatus
OBJECT-TYPE
It is used to manage the MIB files table.
1.3.6.1.4.1.3955.1000.201.35.2.5.1.4RowStatusread-writecurrent
rndHardwareConfiguration
OBJECT-TYPE
Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
1.3.6.1.4.1.3955.1000.201.35.2.6TruthValueread-writecurrent
rndEraseSimulatedConfiguration
OBJECT-TYPE
eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration.
1.3.6.1.4.1.3955.1000.201.35.2.7INTEGER {eraseSimulatedConfiguration(1), simulatedConfigurationPresent(2), simulatedConfigurationErased(3)}read-writecurrent
rndDeleteValuesTable
OBJECT-TYPE
This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
1.3.6.1.4.1.3955.1000.201.35.2.8not-accessiblecurrent
rndDeleteValuesEntry
OBJECT-TYPE
The row definition for the rndDeleteValuesTable table.
1.3.6.1.4.1.3955.1000.201.35.2.8.1not-accessiblecurrent
rndRowStatusVariableName
OBJECT-TYPE
The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
1.3.6.1.4.1.3955.1000.201.35.2.8.1.1DisplayString (SIZE(1..80))read-writecurrent
rndRowStatusObjectId
OBJECT-TYPE
The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
1.3.6.1.4.1.3955.1000.201.35.2.8.1.2OBJECT IDENTIFIERread-writecurrent
rndRowDeleteValue
OBJECT-TYPE
The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
1.3.6.1.4.1.3955.1000.201.35.2.8.1.3INTEGERread-writecurrent
rndDeleteValueEntryStatus
OBJECT-TYPE
It is used to delete an entry from this table.
1.3.6.1.4.1.3955.1000.201.35.2.8.1.4RowStatusread-writecurrent
snmpTesting
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.2.9
rndSimulatedVariablesTable
OBJECT-TYPE
This table indicates which MIB variables are simulated.
1.3.6.1.4.1.3955.1000.201.35.2.9.1not-accessiblecurrent
rndSimulatedVariablesEntry
OBJECT-TYPE
The row definition for the rndSimulatedVariablesTable table.
1.3.6.1.4.1.3955.1000.201.35.2.9.1.1not-accessiblecurrent
rndSimulatedVariableEntryIndex
OBJECT-TYPE
The index entry.
1.3.6.1.4.1.3955.1000.201.35.2.9.1.1.1INTEGERread-onlycurrent
rndSimulatedVariableObjectId
OBJECT-TYPE
The object id of the simulated variable. If the simulated variable belongs to a table entry, the entire entry is henceforth supported.
1.3.6.1.4.1.3955.1000.201.35.2.9.1.1.2OBJECT IDENTIFIERread-writecurrent
rndNotSupportedField
OBJECT-TYPE
Variable for not supported simulation.
1.3.6.1.4.1.3955.1000.201.35.2.9.1.1.3INTEGERread-onlycurrent
rndSimulatedVariableEntryStatus
OBJECT-TYPE
It is used to delete an entry from this table.
1.3.6.1.4.1.3955.1000.201.35.2.9.1.1.4RowStatusread-writecurrent
rndSnmpTestPassword
OBJECT-TYPE
This variable enables the user supplying the correct code to use the SNMP test feature.
1.3.6.1.4.1.3955.1000.201.35.2.9.2INTEGERread-writecurrent
rndSnmpTests
OBJECT-TYPE
This variable enables the authorized user to test various SNMP features.
1.3.6.1.4.1.3955.1000.201.35.2.9.3INTEGER {noSimulation(1), simulateSetFailure(2), simulateAppGet(3), simulateAppGetNext(4)}read-writecurrent
rndSimulateUndo
OBJECT-TYPE
This variable enables the authorized user to test the SNMP UNDO feature.
1.3.6.1.4.1.3955.1000.201.35.2.9.4INTEGERread-writecurrent
rlSnmpServTestRequest
OBJECT-TYPE
This variable enables the authorized user to test the SNMP SERV package.
1.3.6.1.4.1.3955.1000.201.35.2.9.5INTEGERread-writecurrent
rlSnmpServTestResponse
OBJECT-TYPE
This variable enables the authorized user to retrieve the results of a the SNMP SERV package test.
1.3.6.1.4.1.3955.1000.201.35.2.9.6OCTET STRINGread-onlycurrent
rlSnmpServCreateTestPool
OBJECT-TYPE
This variable enables the authorized user to indicate that after its reset the device should create a buffer pool for SNMPServ process PDU testing.
1.3.6.1.4.1.3955.1000.201.35.2.9.7INTEGER {create(1), no-create(2)}read-writecurrent
rlSnmpServITCbindClients
OBJECT-TYPE
This variable enables the authorized user to to indicate that after its reset the device should create ITC clients for SnmpServ data requests clients. The semantics of this variable is as follows: subidentifier 2*n indicates whether the client n is synchronous(1) or asynchronous(2) subidentifier 2*n+1 indicates the number of simulatneous requests expected by client n.
1.3.6.1.4.1.3955.1000.201.35.2.9.8OBJECT IDENTIFIERread-writecurrent
rlSnmpTestSimulatedVariables
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.2.9.9
rlTstBasicRateTable
OBJECT-TYPE
Table for testing SNMP agent.
1.3.6.1.4.1.3955.1000.201.35.2.9.10not-accessiblecurrent
rlTstBasicRateEntry
OBJECT-TYPE
An entry in the rlTstBasicRateTable.
1.3.6.1.4.1.3955.1000.201.35.2.9.10.1not-accessiblecurrent
rlTstBasicRateIfType
OBJECT-TYPE
1.3.6.1.4.1.3955.1000.201.35.2.9.10.1.1INTEGER {isdns(75), isdnu(76)}read-writecurrent
rlTstBasicRateLineTopology
OBJECT-TYPE
1.3.6.1.4.1.3955.1000.201.35.2.9.10.1.2INTEGER {pointToPoint(1), pointToMultipoint(2)}read-writecurrent
rlTstBasicRateIfMode
OBJECT-TYPE
1.3.6.1.4.1.3955.1000.201.35.2.9.10.1.3INTEGER {te(1), nt(2)}read-writecurrent
rlTstBasicRateSignalMode
OBJECT-TYPE
1.3.6.1.4.1.3955.1000.201.35.2.9.10.1.4INTEGER {active(1), inactive(2)}read-writecurrent
rlMibTree
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.2.10
rlMibTreeTable
OBJECT-TYPE
This reflects the MIB tree of the device.
1.3.6.1.4.1.3955.1000.201.35.2.10.1not-accessiblecurrent
rlMibTreeEntry
OBJECT-TYPE
Each row shows a tree relationsship in the MIB.
1.3.6.1.4.1.3955.1000.201.35.2.10.1.1not-accessiblecurrent
rlMibTreeFather
OBJECT-TYPE
The father in a tree relation ship.
1.3.6.1.4.1.3955.1000.201.35.2.10.1.1.1DisplayStringnot-accessiblecurrent
rlMibTreeSonIndex
OBJECT-TYPE
Running index for this table.
1.3.6.1.4.1.3955.1000.201.35.2.10.1.1.2INTEGERnot-accessiblecurrent
rlMibTreeSon
OBJECT-TYPE
The son in a tree relation ship.
1.3.6.1.4.1.3955.1000.201.35.2.10.1.1.3DisplayStringread-onlycurrent
rlMibTreeSonObjectId
OBJECT-TYPE
The object identifier of the son in a tree relation ship.
1.3.6.1.4.1.3955.1000.201.35.2.10.1.1.4OBJECT IDENTIFIERread-onlycurrent
rlMibTreeGrandFather
OBJECT-TYPE
The grand father (i.e father's father) in a tree relation ship.
1.3.6.1.4.1.3955.1000.201.35.2.10.1.1.5DisplayStringread-onlycurrent
rlMibInstances
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.2.11
rlMibTableInstancesInfoTable
OBJECT-TYPE
A table for retreiving information on the current instances in a requested MIB table.
1.3.6.1.4.1.3955.1000.201.35.2.11.1not-accessiblecurrent
rlMibTableInstancesInfoEntry
OBJECT-TYPE
A row with index rlMibTableInstancesInfoTableName = 'xTable' contains information on current instances in 'xTable'.
1.3.6.1.4.1.3955.1000.201.35.2.11.1.1not-accessiblecurrent
rlMibTableInstancesInfoTableName
OBJECT-TYPE
The name of the MIB table (for examle: snmpCommunityTable)
1.3.6.1.4.1.3955.1000.201.35.2.11.1.1.1DisplayString (SIZE(1..160))not-accessiblecurrent
rlMibTableInstancesInfoNumOfInstances
OBJECT-TYPE
Get operation on this object will retreive the current number of instances in the MIB table specified by the index rlMibTableInstancesInfoTableName.
1.3.6.1.4.1.3955.1000.201.35.2.11.1.1.2INTEGERread-onlycurrent
rsPingMIB
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.4
rsPingTable
OBJECT-TYPE
A table of ping request entries.
1.3.6.1.4.1.3955.1000.201.35.4.1not-accessiblecurrent
rsPingEntry
OBJECT-TYPE
A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
1.3.6.1.4.1.3955.1000.201.35.4.1.1not-accessiblecurrent
rsPingAddress
OBJECT-TYPE
The address of the device to be pinged. Once an instance of this object is created, its value can not be changed.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.1IpAddressread-writecurrent
rsPingPacketCount
OBJECT-TYPE
Specifies the number of ping packets to send to the target in this sequence.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.2INTEGER (1..2147483647)read-writecurrent
rsPingPacketSize
OBJECT-TYPE
Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.3INTEGERread-writecurrent
rsPingPacketTimeout
OBJECT-TYPE
Specifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped.'
1.3.6.1.4.1.3955.1000.201.35.4.1.1.4INTEGER (0..3600000)read-writecurrent
rsPingDelay
OBJECT-TYPE
Specifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.5INTEGER (0..3600000)read-writecurrent
rsPingTrapOnCompletion
OBJECT-TYPE
Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.6TruthValueread-writecurrent
rsPingSentPackets
OBJECT-TYPE
The number of ping packets that have been sent to the target in this sequence.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.7Counter32read-onlycurrent
rsPingReceivedPackets
OBJECT-TYPE
The number of ping packets that have been received from the target in this sequence.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.8Counter32read-onlycurrent
rsPingMinReturnTime
OBJECT-TYPE
The minimum round trip time of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.9INTEGERread-onlycurrent
rsPingAvgReturnTime
OBJECT-TYPE
The average round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.10INTEGERread-onlycurrent
rsPingMaxReturnTime
OBJECT-TYPE
The maximum round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.11INTEGERread-onlycurrent
rsPingCompletionStatus
OBJECT-TYPE
If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.12PingCompletionStatusread-onlycurrent
rsPingTimeStamp
OBJECT-TYPE
The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss
1.3.6.1.4.1.3955.1000.201.35.4.1.1.13DisplayString (SIZE(19))read-onlycurrent
rsPingEntryStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.3955.1000.201.35.4.1.1.14RowStatusread-writecurrent
rsPingInetTable
OBJECT-TYPE
A table of ping request entries.
1.3.6.1.4.1.3955.1000.201.35.4.2not-accessiblecurrent
rsPingInetEntry
OBJECT-TYPE
A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
1.3.6.1.4.1.3955.1000.201.35.4.2.1not-accessiblecurrent
rsPingInetAddressType
OBJECT-TYPE
The address type of the device to be pinged. Once an instance of this object is created, its value can not be changed.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.1InetAddressTyperead-writecurrent
rsPingInetAddress
OBJECT-TYPE
The address of the device to be pinged. Once an instance of this object is created, its value can not be changed.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.2InetAddressread-writecurrent
rsPingInetPacketCount
OBJECT-TYPE
Specifies the number of ping packets to send to the target in this sequence.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.3INTEGER (1..2147483647)read-writecurrent
rsPingInetPacketSize
OBJECT-TYPE
Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.4INTEGERread-writecurrent
rsPingInetPacketTimeout
OBJECT-TYPE
Specifies the amount of time (in milliseconds) to wait for a response to a transmitted packet before declaring the packet 'dropped.'
1.3.6.1.4.1.3955.1000.201.35.4.2.1.5INTEGER (0..3600000)read-writecurrent
rsPingInetDelay
OBJECT-TYPE
Specifies the minimum amount of time (in milliseconds) to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.6INTEGER (0..3600000)read-writecurrent
rsPingInetTrapOnCompletion
OBJECT-TYPE
Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.7TruthValueread-writecurrent
rsPingInetSentPackets
OBJECT-TYPE
The number of ping packets that have been sent to the target in this sequence.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.8Counter32read-onlycurrent
rsPingInetReceivedPackets
OBJECT-TYPE
The number of ping packets that have been received from the target in this sequence.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.9Counter32read-onlycurrent
rsPingInetMinReturnTime
OBJECT-TYPE
The minimum round trip time (in milliseconds) of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.10INTEGERread-onlycurrent
rsPingInetAvgReturnTime
OBJECT-TYPE
The average round trip time (in milliseconds) of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.11INTEGERread-onlycurrent
rsPingInetMaxReturnTime
OBJECT-TYPE
The maximum round trip time (in milliseconds) of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.12INTEGERread-onlycurrent
rsPingInetCompletionStatus
OBJECT-TYPE
If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.13PingCompletionStatusread-onlycurrent
rsPingInetTimeStamp
OBJECT-TYPE
The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss
1.3.6.1.4.1.3955.1000.201.35.4.2.1.14DisplayString (SIZE(19))read-onlycurrent
rsPingInetEntryStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.15RowStatusread-writecurrent
rsPingInetSourceAddr
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.3955.1000.201.35.4.2.1.16InetAddressread-writecurrent
rsPowerSupplyRedundacy
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.5
rsPowerSupplyRedundacyTable
OBJECT-TYPE
The power supply redundancy table.
1.3.6.1.4.1.3955.1000.201.35.5.1not-accessiblecurrent
rsPowerSupplyRedundacyEntry
OBJECT-TYPE
The status of power supply redundancy for this table.
1.3.6.1.4.1.3955.1000.201.35.5.1.1not-accessiblecurrent
rsPowerSupplyRedundacyReNumber
OBJECT-TYPE
This number identifies the module backed up by power supply redundancy in the stack.
1.3.6.1.4.1.3955.1000.201.35.5.1.1.1INTEGER (1..31)read-onlycurrent
rsPowerSupplyRedundacyStatus
OBJECT-TYPE
The status of a power supply redundancy of the entry.
1.3.6.1.4.1.3955.1000.201.35.5.1.1.2INTEGER {notExist(1), existButNotWorking(2), bothWorking(3), internalOnlyWorking(4), externalOnlyWorking(5)}read-onlycurrent
rsNvram
OBJECT-IDENTITY
1.3.6.1.4.1.3955.1000.201.35.6
rsEraseNvramAfterReset
OBJECT-TYPE
The name of NVRAM application that will be erased after reset or ALL if all NVRAM should be erased.
1.3.6.1.4.1.3955.1000.201.35.6.1DisplayString (SIZE(0..20))read-writecurrent
rsNvramApplTable
OBJECT-TYPE
The NVRAM application table.
1.3.6.1.4.1.3955.1000.201.35.6.2not-accessiblecurrent
rsNvramApplEntry
OBJECT-TYPE
The status of NVRAM application table.
1.3.6.1.4.1.3955.1000.201.35.6.2.1not-accessiblecurrent
rsNvramApplIndex
OBJECT-TYPE
The index of NVRAM application table.
1.3.6.1.4.1.3955.1000.201.35.6.2.1.1INTEGERread-onlycurrent
rsNvramApplName
OBJECT-TYPE
The name of application used NVRAM.
1.3.6.1.4.1.3955.1000.201.35.6.2.1.2DisplayString (SIZE(0..20))read-onlycurrent