LINKSYS-QOS-CLI-MIB

TEXTUAL-CONVENTION

Specifies one of 4 ACE Actions: 1- Permit- permit to the traffic that define by the parameters. 2- Deny- deny the traffic that define by the parameter. 3- Deny-DisablePort deny the traffic that defined by the parameters and disable the port. 4- Deny-LogInput deny the traffic that defined by the parameters and log incoming traffic.

TEXTUAL-CONVENTION

Specifies one of 13 ACE types: 1- IP ACE. 2- IP-TCP ACE. 3- IP-UDP ACE. 4- IP-offset ACE. 5- MAC ACE. 6- MAC-offset ACE. 7- IP-ICMP ACE. 8- IP-IGMP ACE. 9- IPv6 ACE. 10- IPv6-TCP ACE. 11- IPv6-UDP ACE. 12- IPv6-offset ACE. 13- IPv6-ICMP ACE.

TEXTUAL-CONVENTION

Default action when the ACL reach end point.

TEXTUAL-CONVENTION

Specifies one of 3 ACL types: 1- MAC ACL. 2- IPv4 ACL. 3- IPv6 ACL.

TEXTUAL-CONVENTION

Specifies Disable or enable.

TEXTUAL-CONVENTION

Specifies one of 8 Class-map actios: 1- none - action not specified - use default action. 2 -Mark IP-Precedence. 3- Mark DSCP. 4- Set Egress queue 5- Mark VPT 6- Choose queue by global trust mode.

TEXTUAL-CONVENTION

Specifies one of 2 Class-map types: 1- Match all. logical and between all statements. 2- Match any. logical or between all statements.

TEXTUAL-CONVENTION

Specifies one of 6 offset types: 1- Absolute-start of the packet. 2- Layer 2-start of MAC header. 3- MPLS-start of MPLS header. 4- Layer 3-start of layer 3 header. 5- Layer 4-start of layer 4 header. 6- Layer 5-after TCP/UDP header. 7- VLAN. 8- input device port. 9- input device port. 10-VPT. 11-EtherType. 12-innerVlan. 13-Layer 3 IPv6 - start of layer 3 IPv6 header

TEXTUAL-CONVENTION

Specifies one of Tuple types

TEXTUAL-CONVENTION

Interface type.

TEXTUAL-CONVENTION

Specifies the mark vlan action type in the class map table. 1 - noMark - No vlan marking 2 - mark - mark vlan tagged. 3 - markNestedVlan - add vlan tag to the packet.

TEXTUAL-CONVENTION

Specifies one of 4 Policer Action: 1- No Action 2- Drop out of profile packets. 3- Remark out of profile packets. 4- Remark to explicit value out of profile packets 5- this policer is part of cascade chain

TEXTUAL-CONVENTION

Specifies one of 3 Policer types: 1- Single policer only per one class map. 2- Aggregate policer can be applied to several class maps. 3- Cascade policer.

TEXTUAL-CONVENTION

Specifies one of 3 QoS mode: 1- disable no QoS on the system 2- Basic Qos mode only trust mode with ACL are enabled. 3- Advance mode all Qos option are enabled. 4- Service Mode -v750 DEPEREACTED!!! all Qos option are enabled only in service mode configuration

TEXTUAL-CONVENTION

Specifies one of 6 QoS trust mode: - none.- v750 DEPRECATED - same as globalMode = disable. means that only ACL can be applied. - 802.1p. queue is set by the VPT field. - DSCP. queue is set by the DSCP field - v750 deprecated. replaced with new scalar rlQosDscpMutationEnable . DSCP-Mutation. the DSCP mutate in the ingress and then the queue is set by the DSCP - tcp/udp.- v750 - DEPRECATED - not supported. the queue is set by the l4 port number. - cos-dscp. Queue is set for l2 traffic by VPT field and for l3 traffic by DSCP field.

TEXTUAL-CONVENTION

Queue type Ef or WRR.

TEXTUAL-CONVENTION

Specifies the packet redirection options. Redirection is applied only on permitted packets. 1 - disabled - no redirect 2 - trap - trap to local_host (CPU) 3 - redirectToInterface - redirect to a output interface (port, trunk or vlan) 4 - redirectToAllPorts - redirect to all ports, except the ingress port. 5 - mirror - forward the packet and sent a copy to local_host (CPU) 6 - analyzerPort - forward the packet and sent a copy to egress port. 7 - loopback - redirect the packet the the port it was received. 8 - redirectToPortGroup - send to group of ports, defined in rlUserAssignedVidxTable table 9 - mirror_and_redirectToInterface - send the packet to interface and send a copy to local_host(CPU) 10 -mirror_and_redirectToInterfacesGroup - send the packet to group of ports and send a copy to local_host(CPU)

TEXTUAL-CONVENTION

The Action Drop Type.

TEXTUAL-CONVENTION

Application default actions.

TEXTUAL-CONVENTION

Bitmap that includes days of week. Each bit in the bitmap associated with corresponding day of the week.

TEXTUAL-CONVENTION

The counter can be of different sizes - 32 bit, 48 bit, 64 bit. Maximum is 64.

TEXTUAL-CONVENTION

The counter can be of different types, depends on actions adhered to rules that the counter is working on.

OBJECT-TYPE

*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which mode the system will work: basic , advance or none.

OBJECT-TYPE

*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which trust mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none or vpt-dscp.

OBJECT-TYPE

This scalar define the max number of aces.

OBJECT-TYPE

This table specifies Offset Table information

OBJECT-TYPE

Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then the value will be the vlan tag. if the Type is in/out port it will be the device in/out port. The index is sequential integer represent by rlQosOffsetIndex

OBJECT-TYPE

An arbitrary incremental Index for the offset table.

OBJECT-TYPE

Start of the offset.

OBJECT-TYPE

The Offset value.

OBJECT-TYPE

Define which bit to be extracted from the offset.

OBJECT-TYPE

The value to match too.

OBJECT-TYPE

Pointer for the relevant Tuple.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies Tuple Table information

OBJECT-TYPE

Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTupleIndex

OBJECT-TYPE

An arbitrary incremental Index for the offset table.

OBJECT-TYPE

Start of the offset.

OBJECT-TYPE

The Tuple no.1 value can be regular integer values only.

OBJECT-TYPE

The Tuple no.2 value can be IPv4/IPv6/MAC address or protocol number with mask

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies ACE table information

OBJECT-TYPE

Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceIndex

OBJECT-TYPE

An arbitrary incremental Index for the ACE table.

OBJECT-TYPE

ACE Action to take.

OBJECT-TYPE

ACE Type

OBJECT-TYPE

ACE Tuple 1 pointer.

OBJECT-TYPE

ACE Tuple 1 pointer.

OBJECT-TYPE

ACE Tuple 1 pointer.

OBJECT-TYPE

ACE Tuple 1 pointer.

OBJECT-TYPE

ACE Tuple 1 pointer.

OBJECT-TYPE

ACE Tuple 1 pointer.

OBJECT-TYPE

ACE Tuple 1 pointer.

OBJECT-TYPE

ACE Tuple 1 pointer.

OBJECT-TYPE

ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies ACL table information

OBJECT-TYPE

Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference table. The index is sequential integer represent by rlQosAceIndex

OBJECT-TYPE

An arbitrary incremental Index for the ACE table.

OBJECT-TYPE

Name ACL.

OBJECT-TYPE

ACL Type.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

Holds number of aces in the acl.

OBJECT-TYPE

This table specifies the ACE to ACL relationship.

OBJECT-TYPE

Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAceRefAcePointer

OBJECT-TYPE

The Index is the ACE pointer

OBJECT-TYPE

ACL index Pointer

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies CCL table information

OBJECT-TYPE

Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The index is sequential integer represent by rlQosClassMapIndex

OBJECT-TYPE

Class Map Index

OBJECT-TYPE

Name of the Class Map.

OBJECT-TYPE

Class map type

OBJECT-TYPE

Class Map Action.

OBJECT-TYPE

Mark value when mark action has been chosen in Class Map Action field.

OBJECT-TYPE

Policer pointer. 0-means no policer.

OBJECT-TYPE

Match ACL 1 pointer.

OBJECT-TYPE

Match ACL 2 pointer.

OBJECT-TYPE

If 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defined as VLAN tagged member then a new VLAN tag is added to the packet.

OBJECT-TYPE

If rlQosClassMapMarkVlan is not 'noMark', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id.

OBJECT-TYPE

Specifiy the redirection action.

OBJECT-TYPE

Relevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'. Specified the output interface the packet is redireted to or the port that gets copy of the packet in addition to the port it was forwarded.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

Match ACL 3 pointer.

OBJECT-TYPE

If now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror.

OBJECT-TYPE

Enable/disable counting per class map. Counts packets matche the class map rules.

OBJECT-TYPE

If not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx is added to the packet

OBJECT-TYPE

This table specifies All the Policers in the system Information

OBJECT-TYPE

Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. The index is sequential integer represent by rlQosPolicerIndex

OBJECT-TYPE

Policer Index.

OBJECT-TYPE

Name of the Policer.

OBJECT-TYPE

Policer type

OBJECT-TYPE

Committed rate value.

OBJECT-TYPE

Committed rate Value.

OBJECT-TYPE

Out of profile Action.

OBJECT-TYPE

Pointer to use whan the type is cascade policer. 0-means no cascade policer. It can also be Remark value in case of explicit remark

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies Policy Map Table Information

OBJECT-TYPE

Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer represent by rlQosPolicerIndex

OBJECT-TYPE

Policy map Index.

OBJECT-TYPE

Policy map Name.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies The relationship between policy map to class map

OBJECT-TYPE

Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer

OBJECT-TYPE

The Index is the Class-map pointer

OBJECT-TYPE

Policy map index Pointer

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies for each interface the Policy Map attach to it

OBJECT-TYPE

Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type represent by rlIfType

OBJECT-TYPE

Interface Index.

OBJECT-TYPE

Interface Type(vlan/port).

OBJECT-TYPE

Policy map pointer Input.

OBJECT-TYPE

Policy map pointer Output.

OBJECT-TYPE

Interface Basic Mode Trust is active or not .

OBJECT-TYPE

If there is shaper on the port

OBJECT-TYPE

The CIR for the port shaper. N/A when the shper is disabled

OBJECT-TYPE

The CBS for the port shaper. N/A when the shper is disabled

OBJECT-TYPE

Interface Profile name pointer.

OBJECT-TYPE

Queue Profile name pointer.

OBJECT-TYPE

Queue shape Profile pointer.

OBJECT-TYPE

When one ACL is enterd then what to do for the last rull.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.

OBJECT-TYPE

Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.

OBJECT-TYPE

Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied.

OBJECT-TYPE

If there is Rate limit on the port

OBJECT-TYPE

The CIR for the port rate limit. N/A when the Rate limit is disabled

OBJECT-TYPE

The CBS for the port Rate limit. N/A when the Rate limit is disabled

OBJECT-TYPE

Index of an IPv6 ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.

OBJECT-TYPE

Index of an IPv6 ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.

OBJECT-TYPE

This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters.

OBJECT-TYPE

Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability factor for Drop precedence 0,1,2 and the WRED Q factor and the EF priority and the WRR weight. The index is Interface Index represent by rlIfProfileName and queue-id represent by rlQosQueueId

OBJECT-TYPE

Interface Index.

OBJECT-TYPE

Queue id Index.

OBJECT-TYPE

Tail Drop Threshold for Drop Precedence 0.

OBJECT-TYPE

Tail Drop Threshold for Drop Precedence 1.

OBJECT-TYPE

Tail Drop Threshold for Drop Precedence 2.

OBJECT-TYPE

WRED Min Threshold for Drop Precedence 2.

OBJECT-TYPE

WRED Max Threshold for Drop Precedence 0.

OBJECT-TYPE

WRED probability for Drop Precedence 0.

OBJECT-TYPE

WRED Min Threshold for Drop Precedence 2.

OBJECT-TYPE

WRED Max Threshold for Drop Precedence 1.

OBJECT-TYPE

WRED probability for Drop Precedence 1.

OBJECT-TYPE

WRED Min Threshold for Drop Precedence 2.

OBJECT-TYPE

WRED Max Threshold for Drop Precedence 2.

OBJECT-TYPE

WRED probability for Drop Precedence 2.

OBJECT-TYPE

Q factor for WRED.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies The DSCP Mutation table

OBJECT-TYPE

Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp

OBJECT-TYPE

Old DSCP.

OBJECT-TYPE

New DSCP.

OBJECT-TYPE

This table specifies The DSCP Remark table

OBJECT-TYPE

Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp

OBJECT-TYPE

Old DSCP.

OBJECT-TYPE

New DSCP.

OBJECT-TYPE

This table specifies The Cos to queue map table

OBJECT-TYPE

Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex

OBJECT-TYPE

CoS value (0-7).

OBJECT-TYPE

Queue ID.

OBJECT-TYPE

This table specifies The DSCP to Queue map table

OBJECT-TYPE

Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex

OBJECT-TYPE

DSCP value.

OBJECT-TYPE

Queue Number.

OBJECT-TYPE

This table specifies TCP Port to Queue map table

OBJECT-TYPE

Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort

OBJECT-TYPE

TCP port number.

OBJECT-TYPE

Queue Number.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies UDP Port to Queue map table

OBJECT-TYPE

Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort

OBJECT-TYPE

UDP port number.

OBJECT-TYPE

Queue value.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies UDP Port to DSCP map table

OBJECT-TYPE

This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId

OBJECT-TYPE

Queue-ID.

OBJECT-TYPE

Enable/disable

OBJECT-TYPE

The priority of the queue

OBJECT-TYPE

This table describes the queue managment profiles

OBJECT-TYPE

Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName

OBJECT-TYPE

Profile name for the Queue profile.

OBJECT-TYPE

EF or WRR

OBJECT-TYPE

for EF read-only for wrr the weight

OBJECT-TYPE

EF or WRR

OBJECT-TYPE

for EF read-only for wrr the weight

OBJECT-TYPE

EF or WRR

OBJECT-TYPE

for EF read-only for wrr the weight

OBJECT-TYPE

EF or WRR

OBJECT-TYPE

for EF read-only for wrr the weight

OBJECT-TYPE

EF or WRR

OBJECT-TYPE

for EF read-only for wrr the weight

OBJECT-TYPE

EF or WRR

OBJECT-TYPE

for EF read-only for wrr the weight

OBJECT-TYPE

EF or WRR

OBJECT-TYPE

for EF read-only for wrr the weight

OBJECT-TYPE

EF or WRR

OBJECT-TYPE

for EF read-only for wrr the weight

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

how many time this entry connected to the if policy table

OBJECT-TYPE

This table specifies the queue shaper profile

OBJECT-TYPE

Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex

OBJECT-TYPE

Profile Index.

OBJECT-TYPE

CIR for Queue1 0 for not active

OBJECT-TYPE

CBS for Queue1 0 for not active

OBJECT-TYPE

CIR for Queue2 0 for not active

OBJECT-TYPE

CBS for Queue2 0 for not active

OBJECT-TYPE

CIR for Queue3 0 for not active

OBJECT-TYPE

CBS for Queue3 0 for not active

OBJECT-TYPE

CIR for Queue4 0 for not active

OBJECT-TYPE

CBS for Queue4 0 for not active

OBJECT-TYPE

CIR for Queue5 0 for not active

OBJECT-TYPE

CBS for Queue5 0 for not active

OBJECT-TYPE

CIR for Queue6 0 for not active

OBJECT-TYPE

CBS for Queue6 0 for not active

OBJECT-TYPE

CIR for Queue7 0 for not active

OBJECT-TYPE

CBS for Queue7 0 for not active

OBJECT-TYPE

CIR for Queue8 0 for not active

OBJECT-TYPE

CBS for Queue8 0 for not active

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

The table is used to show statistics for ACL applied on an interface.

OBJECT-TYPE

This entry shows value of conter for a particular ACE of an ACL.

OBJECT-TYPE

Interface Index on which ACL is applied.

OBJECT-TYPE

Index of ACL, which was applied on the IfIndex.

OBJECT-TYPE

Index of ACE, which is belong to an ACL.

OBJECT-TYPE

The value of the ACE counter.

OBJECT-TYPE

The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. Offset table - first free index. ACE table - last used index + ACE indexes delta. ACL table - first free index. Class Map table - last used index + Class Map indexes delta. Policy Map table - first free index. Policer Table - first free index. The ACE indexes delta and Class Map indexes delta are used to supply QoS MIB user easy insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and increment' approach is used in all cases.

OBJECT-TYPE

The entry is used to get free index for particular table.

OBJECT-TYPE

Identification of the table, for which free index is retrieved.

OBJECT-TYPE

Free index for table. 0 means no free entries.

OBJECT-TYPE

The table is used to get the ACL,Class-Map and Policy-Map indexes from the name.

OBJECT-TYPE

The entry is used to get index form particular name and table type.

OBJECT-TYPE

Identification of the table, for which the index is retrieved.

OBJECT-TYPE

The name of the entry

OBJECT-TYPE

the index for table

OBJECT-TYPE

This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object can be used for warning messages when users assign a QoS map item, or a Class to the stack control queue.

OBJECT-TYPE

This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT). This scalar object can be used for warning messages when users assign a stack control CoS to a non-stacking control queue.

OBJECT-TYPE

The table is used to set default 802.1p map (vpt to queue)

OBJECT-TYPE

The entry is used to get index form particular name and table type.

OBJECT-TYPE

vlan priority tag , 3 bits of priority which determine the service class.

OBJECT-TYPE

the queue id vary from the first queue id to Max Number of queues supported

OBJECT-TYPE

The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simultaneously with IP and MAC ACLs.

OBJECT-TYPE

The entry is used to apply predefined ACLs to the interface.

OBJECT-TYPE

IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured.

OBJECT-TYPE

Interface Type(vlan/port).

OBJECT-TYPE

This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask Description ===================================================== LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated NetBuei/NetBios frames IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated NetBuei/NetBios frames

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table specifies ACE table with two index information

OBJECT-TYPE

Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 11 tuples pointers. The index is sequential integer represent by rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index

OBJECT-TYPE

An arbitrary incremental Index for the ACL ACE connection.

OBJECT-TYPE

An arbitrary incremental Index for the ACE table.

OBJECT-TYPE

ACE Action to take.

OBJECT-TYPE

ACE Type

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

ACE time range name.

OBJECT-TYPE

ACE time range is rule active state shows is ACE currently active or not.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

ACE Tuple pointer.

OBJECT-TYPE

This field is valid only if AceActionType is deny or deny-DisablePort.

OBJECT-TYPE

MIB's version, the current version is 11 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. Change the unit in Policer table from bps to kbps 3 - Add new MIB's value for Textual convention QosObjectMode 4 - Add new MIBs rlQosDscpQueueDefaultMapTable 5 - Add new advanced action : trustCosDscp 6 - Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType Add ip-ICMP,ip-IGMP To AceObjectType Add vpt,ethertype To ClassOffsetType 7- Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit to rlQosIfPolicyTable 8 - Add Added rlQosDscpToDpTable 9 - Add statistics 10 - Add innerVlan to ClassOffsetType And inner-vlan to ClassTupleType 11 - Added rlQosCPUSafeGuardEnable

OBJECT-TYPE

The table is used to set default dscp to queue map

OBJECT-TYPE

The entry is used to get index form particular name and table type.

OBJECT-TYPE

dscp , 6 bits of priority which determine the service class.

OBJECT-TYPE

the queue id vary from the first queue id to Max Number of queues supported

OBJECT-TYPE

This table specifies The DSCP To Dp table

OBJECT-TYPE

Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlQosDscp

OBJECT-TYPE

Packet DSCP.

OBJECT-TYPE

New DP.

OBJECT-IDENTITY

OBJECT-TYPE

This table specifies statistics counter for policies with specific actions

OBJECT-TYPE

Each entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whether it's enabled.

OBJECT-TYPE

Counter type.

OBJECT-TYPE

Counter size in bits.

OBJECT-TYPE

Indication whether the counter is enabled.

OBJECT-TYPE

Counter value.

OBJECT-TYPE

This table specifies statistics counters per QoS meter

OBJECT-TYPE

Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether the counter for the meter is enabled and two counters value - for in-profile bytes and for out-of-profile bytes.

OBJECT-TYPE

Counter value of in profile traffic.

OBJECT-TYPE

Counter size in bits for in profile counter.

OBJECT-TYPE

Counter value of Out Profile traffic.

OBJECT-TYPE

Counter size in bits for out profile counter.

OBJECT-TYPE

The status of a table entry. It is used to delete an entry from this table.

OBJECT-TYPE

This table specifies statistics counters per QoS aggregate meter

OBJECT-TYPE

Each entry in this table describes counter per aggregate meter. The index is rlQosPolicerIndex. In each entry there are fields representing whether the counter for the meter is enabled and three counters values - for green, yellow and red profiles bytes.

OBJECT-TYPE

Counter value of In Profile amount of bytes.

OBJECT-TYPE

Counter size in bits for In Profile .

OBJECT-TYPE

Counter value of Out Profile amount of bytes.

OBJECT-TYPE

Counter size in bits for Out Profile.

OBJECT-TYPE

The status of a table entry. It is used to delete an entry from this table.

OBJECT-TYPE

This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence

OBJECT-TYPE

Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'. The index is port represent by rlQosOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value.

OBJECT-TYPE

Counter id, the key of the table.

OBJECT-TYPE

Port for which the flow is counted.

OBJECT-TYPE

Indication for whether the port is configured as range of all the ports

OBJECT-TYPE

VLAN for which the flow is counted.

OBJECT-TYPE

Indication for whether the VLAN is configured as range of all the VLANS

OBJECT-TYPE

Queue for which the flow is counted.

OBJECT-TYPE

Indication for whether the queue is configured as range of all the Queues

OBJECT-TYPE

Drop Precedence for which the flow is counted.

OBJECT-TYPE

Indication for whether the DP is configured as range of all the DPs

OBJECT-TYPE

The counter for tail dropped value.

OBJECT-TYPE

The counter for all traffic value.

OBJECT-TYPE

Counter size in bits for the counter.

OBJECT-TYPE

The status of a table entry. It is used to delete an entry from this table.

OBJECT-TYPE

This table specifies statistics global counters for specific rules for all ports that they are connected to

OBJECT-TYPE

Each entry represents global counter.

OBJECT-TYPE

Counter type.

OBJECT-TYPE

Counter size in bits.

OBJECT-TYPE

Counter value.

OBJECT-TYPE

The status of a table entry. It is used to delete an entry from this table.

OBJECT-TYPE

This scalar indicates to clear all the counters.

OBJECT-IDENTITY

OBJECT-TYPE

A table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system.

OBJECT-TYPE

A Single entry containing Classifier utilization information.

OBJECT-TYPE

The Unit ID of this Classifier. must be unique per entry. This is an index into the table.

OBJECT-TYPE

The classifier utilization percentage.

OBJECT-TYPE

The classifier utilization number of used rules, in short rules resolution.

OBJECT-TYPE

The classifier utilization number of not used yet rules on the unit, in short rules resolution.

OBJECT-TYPE

The system classifier utilization percentage.

OBJECT-TYPE

Number of used rules per system, in short rule resolution

OBJECT-TYPE

This table maps between port and profile

OBJECT-TYPE

Each entry in this table describes mapping between port and profile

OBJECT-TYPE

Port number

OBJECT-TYPE

profile

OBJECT-TYPE

This scalar enables/disables CPU Safeguard.

OBJECT-TYPE

This table specifies The relationship between policy map to class map

OBJECT-TYPE

Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer. It is also specifies the class-map priotiry in the policy-map, which set the rules order within the policy-map

OBJECT-TYPE

The class-map priority within the policy-map

OBJECT-TYPE

Class-map index Pointer

OBJECT-TYPE

Policy map index Pointer

OBJECT-TYPE

The status of a table entry. It is used to delete/Add an entry from this table.

OBJECT-TYPE

This table holds statistics for deny ACEs.

OBJECT-TYPE

Each entry in this table holds number of hits for deny ACEs attached to specific Interface.

OBJECT-TYPE

Interface Index.

OBJECT-TYPE

Number of hits on deny ACEs for this interface.

OBJECT-TYPE

Number of hits on deny ACEs for 'Other'-type flow.

OBJECT-TYPE

Each bit that is set in this portList represent a port or trunk that its hit counters should be reset.

OBJECT-TYPE

This scalar indicates clearing 'Other'-type flow counter operation.

OBJECT-TYPE

This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode.

OBJECT-TYPE

This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current implemnetaion assumes only one entry exist.

OBJECT-TYPE

Entry index - currenly only one entry can exist, indexes hard coded with value '1'.

OBJECT-TYPE

This field replaces deprecated scalar rlQosCliQosMode. Defines the global qos operation mode: disable, basic or advnaced.

OBJECT-TYPE

This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos basic mode.

OBJECT-TYPE

This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos advanced mode.

OBJECT-TYPE

This field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode.

OBJECT-TYPE

This field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced) 2.if rlQosGlobalQoSMode is advanced then rlQoSPortTrustAdvancedMode must be set to true.

OBJECT-TYPE

This status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable.

OBJECT-TYPE

The table is used to show statistics for ACL applied on an interface.

OBJECT-TYPE

This entry returns the value of the class map counter. Entry is added/deleted to this MIB when counting is enabled/disabled on the class map. The counter is set to zero upon reading its value.

OBJECT-TYPE

This field returns the current value of the class map counter.

OBJECT-TYPE

The read only table is used to get the trapId assisated to application wants to use the trap action in the class map table

OBJECT-TYPE

This entry holds the trapId for application using the trap action in the class map table.

OBJECT-TYPE

This field represents the application name and traffic type.

OBJECT-TYPE

This field defines the trap id to be use in the class map entry.

OBJECT-TYPE

This scalar specifies application-specific default action