LINKSYS-POE-MIB
- Registered at
- 1.3.6.1.4.1.3955.1000.201.108
- Last updated
- 2009-11-26 00:00
- Organization
- Linksys.
- Revisions
- 2010-06-02 00:00, 2009-11-26 00:00
- Namespace
- linksys
- Source file
LINKSYS-POE-MIB- Digest
sha256:9c487703be677cb5a38251c3884a6d1a1ba78b800bde7a29f70915a23c70bc0d
Description
Add a new field in the PoE MIB to indicate Max power allocation allowed
Contact
Linksys.com
Imports
| From | Symbols |
|---|---|
| LINKSYS-MIB | rnd |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
LINKSYS-MIB LINKSYS-POE-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rlPethPsePortTable OBJECT-TYPE The table listing additional information for Power Over Ethernet ports. | 1.3.6.1.4.1.3955.1000.201.108.1 | not-accessible | current | |
| rlPethPsePortEntry OBJECT-TYPE An entry in the rlPethPsePortTable. | 1.3.6.1.4.1.3955.1000.201.108.1.1 | not-accessible | current | |
| rlPethPsePortGroupIndex OBJECT-TYPE This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. | 1.3.6.1.4.1.3955.1000.201.108.1.1.1 | INTEGER (1..2147483647) | not-accessible | current |
| rlPethPsePortIndex OBJECT-TYPE This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected. | 1.3.6.1.4.1.3955.1000.201.108.1.1.2 | INTEGER (1..2147483647) | not-accessible | current |
| rlPethPsePortOutputVoltage OBJECT-TYPE This variable indicates on the output voltage level in milli volts from rlPethPsePortIndex. | 1.3.6.1.4.1.3955.1000.201.108.1.1.3 | INTEGER (0..2147483647) | read-only | current |
| rlPethPsePortOutputCurrent OBJECT-TYPE This variable indicates on the output current level in milli amper from rlPethPsePortIndex. | 1.3.6.1.4.1.3955.1000.201.108.1.1.4 | INTEGER (0..2147483647) | read-only | current |
| rlPethPsePortOutputPower OBJECT-TYPE This variable indicates on the output power level in milli watts from rlPethPsePortIndex. | 1.3.6.1.4.1.3955.1000.201.108.1.1.5 | INTEGER (0..2147483647) | read-only | current |
| rlPethPsePortPowerLimit OBJECT-TYPE This variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex. | 1.3.6.1.4.1.3955.1000.201.108.1.1.6 | INTEGER (0..2147483647) | read-write | current |
| rlPethPsePortStatus OBJECT-TYPE This variable indicates on the hardware status of rlPethPsePortIndex. | 1.3.6.1.4.1.3955.1000.201.108.1.1.7 | INTEGER (0..2147483647) | read-only | current |
| rlPethPsePortStatusDescription OBJECT-TYPE This variable indicates the description of the hardware status of rlPethPsePortIndex. | 1.3.6.1.4.1.3955.1000.201.108.1.1.8 | DisplayString (SIZE(0..80)) | read-only | current |
| rlPethPsePortOperPowerLimit OBJECT-TYPE This variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex. | 1.3.6.1.4.1.3955.1000.201.108.1.1.9 | INTEGER (0..2147483647) | read-only | current |
| rlPethPsePortSupportPoePlus OBJECT-TYPE This variable indicates if the port supports poe plus. | 1.3.6.1.4.1.3955.1000.201.108.1.1.10 | TruthValue | read-only | current |
| rlPethPsePortTimeRangeName OBJECT-TYPE This variable is used to bind PoE port to time range. | 1.3.6.1.4.1.3955.1000.201.108.1.1.11 | DisplayString (SIZE(0..32)) | read-write | current |
| rlPethPsePortOperStatus OBJECT-TYPE This Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status. | 1.3.6.1.4.1.3955.1000.201.108.1.1.12 | TruthValue | read-only | current |
| rlPethPsePortMaxPowerAllocAllowed OBJECT-TYPE This variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex. | 1.3.6.1.4.1.3955.1000.201.108.1.1.13 | INTEGER (0..2147483647) | read-only | current |
| rlPethPsePortSupportPoe OBJECT-TYPE This variable indicates if the port is a poe port | 1.3.6.1.4.1.3955.1000.201.108.1.1.14 | TruthValue | read-only | current |
| rlPethMainPseTable OBJECT-TYPE The table listing additional read - only information for Power Over Ethernet. | 1.3.6.1.4.1.3955.1000.201.108.2 | not-accessible | current | |
| rlPethMainPseEntry OBJECT-TYPE An entry in the rlPethMainPseTable. | 1.3.6.1.4.1.3955.1000.201.108.2.1 | not-accessible | current | |
| rlPethMainPseGroupIndex OBJECT-TYPE This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. | 1.3.6.1.4.1.3955.1000.201.108.2.1.1 | INTEGER (1..2147483647) | not-accessible | current |
| rlPethMainPseSwVersion OBJECT-TYPE This variable identifies the MCU SW version. | 1.3.6.1.4.1.3955.1000.201.108.2.1.2 | DisplayString (SIZE(0..20)) | read-only | current |
| rlPethMainPseHwVersion OBJECT-TYPE This variable identifies the MCU HW version. | 1.3.6.1.4.1.3955.1000.201.108.2.1.3 | DisplayString (SIZE(0..20)) | read-only | current |
| rlPethMainPseHwType OBJECT-TYPE This variable identifies the MCU HW type (enhanced, plus, none). | 1.3.6.1.4.1.3955.1000.201.108.2.1.4 | INTEGER {enhanced(1), plus(2), auto(3), nonPoe(4), enhancedPlus(5)} | read-only | current |
| rlPethMainPsePowerGuardBand OBJECT-TYPE This variable identifies the guard band in [W] for not connecting additional ports. | 1.3.6.1.4.1.3955.1000.201.108.2.1.5 | INTEGER (0..2147483647) | read-only | current |
| rlPethPowerPseTable OBJECT-TYPE The table listing additional read-write information for Power Over Ethernet. | 1.3.6.1.4.1.3955.1000.201.108.3 | not-accessible | current | |
| rlPethPowerPseEntry OBJECT-TYPE An entry in the rlPethPowerPseTable. | 1.3.6.1.4.1.3955.1000.201.108.3.1 | not-accessible | current | |
| rlPethPowerPseGroupIndex OBJECT-TYPE This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, PethPowerPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. | 1.3.6.1.4.1.3955.1000.201.108.3.1.1 | INTEGER (1..8) | not-accessible | current |
| rlPethPowerPsePower OBJECT-TYPE This variable identifies the maximum power in [W] supplied by PSE. | 1.3.6.1.4.1.3955.1000.201.108.3.1.2 | INTEGER {none(0), ps1(1), ps2(2), ps3(3)} | read-write | current |
| rlPethPowerPseRpsPower OBJECT-TYPE This variable identifies the maximum power in [W] supplied by PSE + RPS. | 1.3.6.1.4.1.3955.1000.201.108.3.1.3 | INTEGER {none(0), rps1(1), rps2(2), rps3(3)} | read-write | current |
| rlPethPowerPsePowerManagementMode OBJECT-TYPE This variable identifies power management mode. | 1.3.6.1.4.1.3955.1000.201.108.3.1.4 | INTEGER {portlimit(0), classlimit(5), maxlimit(6)} | read-write | current |
| rlPethPowerPsedisconnectMethod OBJECT-TYPE This variable identifies disconnect method. | 1.3.6.1.4.1.3955.1000.201.108.3.1.5 | INTEGER {lowestpriority(0), nextport(1)} | read-write | current |
| rlPethPowerPseTemperatureSensor OBJECT-TYPE This variable identifies the pd temperature sensor. | 1.3.6.1.4.1.3955.1000.201.108.3.1.6 | INTEGER (-200..200) | read-only | current |
| rlPethPowerPseInrushTestEnabled OBJECT-TYPE This variable identifies if HW inrush test will be disabled. by default HW inrush test is enabled. | 1.3.6.1.4.1.3955.1000.201.108.3.1.7 | INTEGER {enabled(0), disabled(1)} | read-write | current |