MIBs Depot

LINKSYS-IpRouter

Registered at
1.3.6.1.4.1.3955.1000.201.26.18
Last updated
2004-06-01 00:00
Organization
Linksys LLC.
Revisions
2004-06-01 00:00
Namespace
linksys
Source file
LINKSYS-IpRouter
Digest
sha256:3c88802a0186b3b20b89a93f1b688712ddf85caa582230da6a89daa1ca1cd5c4

Description

The private MIB module definition for RND router MIB.

Contact

www.linksys.com/business/support

Imports

FromSymbols
LINKSYS-IPipRedundancy, ipRipFilter, ipRouteLeaking, ipSpec, rip2Spec, rlIpRoutingProtPreference, rlOspf
OSPF-MIBAreaID, RouterID, ospfIfEntry, ospfVirtIfEntry
RIPv2-MIBrip2IfConfEntry
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANA-RTPROTO-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IP-FORWARD-MIB
IP-MIB
LINKSYS-IP
LINKSYS-IpRouter
LINKSYS-MIB
OSPF-MIB
RIPv2-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
rsRip2IfConfTable
OBJECT-TYPE
This table is extension of rip2IfConfTable (RFC 1724 ,RIP 2)
1.3.6.1.4.1.3955.1000.201.26.3.1not-accessiblecurrent
rsRip2IfConfEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.3955.1000.201.26.3.1.1not-accessiblecurrent
rsRip2IfConfAddress
OBJECT-TYPE
The IP Address of this system on the indicated subnet.
1.3.6.1.4.1.3955.1000.201.26.3.1.1.1IpAddressread-onlycurrent
rsRip2IfConfVirtualDis
OBJECT-TYPE
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
1.3.6.1.4.1.3955.1000.201.26.3.1.1.2INTEGERread-writecurrent
rlRip2IfConfKeyChain
OBJECT-TYPE
Name of the key-chain which rip2 interface uses for md5 authentication
1.3.6.1.4.1.3955.1000.201.26.3.1.1.3DisplayStringread-writecurrent
rlRip2IfConfAdminStatus
OBJECT-TYPE
This variable defines administrative status of RIP interface.
1.3.6.1.4.1.3955.1000.201.26.3.1.1.4INTEGER {enable(1), disable(2)}read-writecurrent
rlRip2IfConfInFilteringType
OBJECT-TYPE
Type of Rx filtering (ACL, Prefix List etc).
1.3.6.1.4.1.3955.1000.201.26.3.1.1.5INTEGER {none(1), stdIpAcl(2), pefixList(3)}read-writecurrent
rlRip2IfConfOutFilteringType
OBJECT-TYPE
Type of Tx filtering (ACL, Prefix List etc).
1.3.6.1.4.1.3955.1000.201.26.3.1.1.6INTEGER {none(1), stdIpAcl(2), pefixList(3)}read-writecurrent
rlRip2IfConfInFilterListName
OBJECT-TYPE
Name of a filtering list. The list defines which networks are to be received and which are to be suppressed in routing updates. List type is defined by rlRip2IfConfFilteringType.
1.3.6.1.4.1.3955.1000.201.26.3.1.1.7DisplayStringread-writecurrent
rlRip2IfConfOutFilterListName
OBJECT-TYPE
Name of a filtering list. The list defines which networks are to be sent and which are to be suppressed. List type is defined by rlRip2IfConfFilteringType.
1.3.6.1.4.1.3955.1000.201.26.3.1.1.8DisplayStringread-writecurrent
rlRip2IfConfDefInfOriginate
OBJECT-TYPE
if set to global RIP behavior is specified by the value of rlRip2GlobalDefaultInformationOriginate scalar if set to enabled RIP will advertise default route on this interfaces if set to passiveOnly RIP will advertise default route on this interfaces only if it is configured to passive mode
1.3.6.1.4.1.3955.1000.201.26.3.1.1.9INTEGER {global(1), disabled(2), enabled(3), passiveOnly(4)}read-writecurrent
rlRip2MibVersion
OBJECT-TYPE
MIB's version, the current version is 2.
1.3.6.1.4.1.3955.1000.201.26.3.2INTEGERread-onlycurrent
rlRip2RedistDefaultMetric
OBJECT-TYPE
Default metric value when RIP advertises routes, derived by other protocols.
1.3.6.1.4.1.3955.1000.201.26.3.3Unsigned32 (1..15)read-writecurrent
rlRip2RedistStaticTransparent
OBJECT-TYPE
If set to TRUE causes RIP to use the routing table metric for redistributed static routes as the RIP metric. If set to FALSE then the metric defined in rlRip2RedistDefaultMetric is used.
1.3.6.1.4.1.3955.1000.201.26.3.4TruthValueread-writecurrent
rlRip2ClearStatistics
OBJECT-TYPE
Clears RIP statistics counters of all interfaces and all peers.
1.3.6.1.4.1.3955.1000.201.26.3.5TruthValueread-writecurrent
rlRip2IfConfGlobalPassiveInterface
OBJECT-TYPE
if set to TRUE all interfaces created will be created as passive (rip2IfConfSend = doNotSend)
1.3.6.1.4.1.3955.1000.201.26.3.6TruthValueread-writecurrent
rlRip2GlobalDefInfOriginate
OBJECT-TYPE
if set to Enabled RIP will advertise default route on all RIP interfaces if set to PassiveOnly RIP will advertise default route on all RIP passive interfaces
1.3.6.1.4.1.3955.1000.201.26.3.7INTEGER {disabled(1), enabled(2), passiveOnly(3)}read-writecurrent
rlRip2RedistConnected
OBJECT-TYPE
If set to TRUE causes RIP to redistribute directly connected interfaces, on which RIP is not enabled.
1.3.6.1.4.1.3955.1000.201.26.3.8TruthValueread-writecurrent
rlRip2RedistConnectedTransparent
OBJECT-TYPE
If set to TRUE causes RIP to use the routing table metric for redistributed connected routes as the RIP metric. If set to FALSE then the metric defined in rlRip2RedistDefaultMetric is used.
1.3.6.1.4.1.3955.1000.201.26.3.9TruthValueread-writecurrent
rlRip2RedistConnectedMetric
OBJECT-TYPE
User defined metric value when RIP advertises directly connected interfaces, on which RIP is not enabled.
1.3.6.1.4.1.3955.1000.201.26.3.10Unsigned32 (0..15)read-writecurrent
ipRedundAdminStatus
OBJECT-TYPE
This parameter controls the IP Redundancy in the device. In case the parameter is Enable and the other router becomes inoperational, all the traffic is handled by this element.
1.3.6.1.4.1.3955.1000.201.26.6.1INTEGER {enable(1), disable(2)}read-writecurrent
ipRedundOperStatus
OBJECT-TYPE
obsolete
1.3.6.1.4.1.3955.1000.201.26.6.2INTEGER {active(1), inactive(2)}read-onlycurrent
ipRedundRoutersTable
OBJECT-TYPE
List of IP addresses backed up by this router.
1.3.6.1.4.1.3955.1000.201.26.6.3not-accessiblecurrent
ipRedundRoutersEntry
OBJECT-TYPE
The row definition for this table.
1.3.6.1.4.1.3955.1000.201.26.6.3.1not-accessiblecurrent
ipRedundRoutersIfAddr
OBJECT-TYPE
The Ip address of the IP interface on which the redundancy feature is operational.
1.3.6.1.4.1.3955.1000.201.26.6.3.1.1IpAddressread-onlycurrent
ipRedundRoutersMainRouterAddr
OBJECT-TYPE
The Ip address of the polled main router.
1.3.6.1.4.1.3955.1000.201.26.6.3.1.2IpAddressread-onlycurrent
ipRedundRoutersOperStatus
OBJECT-TYPE
If active, the main router is considered inoperational and the IP interface operates as its backup.
1.3.6.1.4.1.3955.1000.201.26.6.3.1.3INTEGER {active(1), inactive(2)}read-onlycurrent
ipRedundRoutersPollInterval
OBJECT-TYPE
Polling interval for this router (in seconds). If 0 the router is not polled.
1.3.6.1.4.1.3955.1000.201.26.6.3.1.4INTEGERread-writecurrent
ipRedundRoutersTimeout
OBJECT-TYPE
Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup.
1.3.6.1.4.1.3955.1000.201.26.6.3.1.5INTEGERread-writecurrent
ipRedundRoutersStatus
OBJECT-TYPE
Entry status
1.3.6.1.4.1.3955.1000.201.26.6.3.1.6INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)}read-writecurrent
ipLeakStaticToRip
OBJECT-TYPE
This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
1.3.6.1.4.1.3955.1000.201.26.7.1INTEGER {enable(1), disable(2)}read-writecurrent
ipLeakStaticToOspf
OBJECT-TYPE
This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes.
1.3.6.1.4.1.3955.1000.201.26.7.2INTEGER {enable(1), disable(2)}read-writecurrent
ipLeakOspfToRip
OBJECT-TYPE
This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP.
1.3.6.1.4.1.3955.1000.201.26.7.3INTEGER {enable(1), disable(2)}read-writecurrent
ipLeakRipToOspf
OBJECT-TYPE
This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes.
1.3.6.1.4.1.3955.1000.201.26.7.4INTEGER {enable(1), disable(2)}read-writecurrent
ipLeakExtDirectToOspf
OBJECT-TYPE
This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes.
1.3.6.1.4.1.3955.1000.201.26.7.5INTEGER {enable(1), disable(2)}read-writecurrent
rsIpRipFilterGlbTable
OBJECT-TYPE
The table of RIP global filters per IP router.
1.3.6.1.4.1.3955.1000.201.26.8.1not-accessiblecurrent
rsIpRipFilterGlbEntry
OBJECT-TYPE
An entry in the RIP global filter table
1.3.6.1.4.1.3955.1000.201.26.8.1.1not-accessiblecurrent
rsIpRipFilterGlbType
OBJECT-TYPE
Type of filter - input/output
1.3.6.1.4.1.3955.1000.201.26.8.1.1.1INTEGER {input(1), output(2)}read-onlycurrent
rsIpRipFilterGlbNumber
OBJECT-TYPE
Number of RIP filter.
1.3.6.1.4.1.3955.1000.201.26.8.1.1.2INTEGERread-onlycurrent
rsIpRipFilterGlbStatus
OBJECT-TYPE
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
1.3.6.1.4.1.3955.1000.201.26.8.1.1.3INTEGER {valid(1), invalid(2), underCreation(3)}read-writecurrent
rsIpRipFilterGlbIpAddr
OBJECT-TYPE
network prefix IP address, as in the forwarding table.
1.3.6.1.4.1.3955.1000.201.26.8.1.1.4IpAddressread-writecurrent
rsIpRipFilterGlbNetworkMaskBits
OBJECT-TYPE
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
1.3.6.1.4.1.3955.1000.201.26.8.1.1.5INTEGERread-writecurrent
rsIpRipFilterGlbMatchBits
OBJECT-TYPE
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
1.3.6.1.4.1.3955.1000.201.26.8.1.1.6INTEGERread-writecurrent
rsIpRipFilterGlbAction
OBJECT-TYPE
Filter action - permit/deny for this network
1.3.6.1.4.1.3955.1000.201.26.8.1.1.7INTEGER {deny(1), permit(2)}read-writecurrent
rsIpRipFilterLclTable
OBJECT-TYPE
Table of input/output RIP filters used per IP Interface.
1.3.6.1.4.1.3955.1000.201.26.8.2not-accessiblecurrent
rsIpRipFilterLclEntry
OBJECT-TYPE
An entry in the Intf RIP filter table
1.3.6.1.4.1.3955.1000.201.26.8.2.1not-accessiblecurrent
rsIpRipFilterLclIpIntf
OBJECT-TYPE
The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr.
1.3.6.1.4.1.3955.1000.201.26.8.2.1.1IpAddressread-onlycurrent
rsIpRipFilterLclType
OBJECT-TYPE
Type of filter - input/output
1.3.6.1.4.1.3955.1000.201.26.8.2.1.2INTEGER {input(1), output(2)}read-onlycurrent
rsIpRipFilterLclNumber
OBJECT-TYPE
Number of RIP filter for this Interface
1.3.6.1.4.1.3955.1000.201.26.8.2.1.3INTEGERread-onlycurrent
rsIpRipFilterLclStatus
OBJECT-TYPE
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
1.3.6.1.4.1.3955.1000.201.26.8.2.1.4INTEGER {valid(1), invalid(2), underCreation(3)}read-writecurrent
rsIpRipFilterLclIpAddr
OBJECT-TYPE
network prefix IP address, as in the forwarding table.
1.3.6.1.4.1.3955.1000.201.26.8.2.1.5IpAddressread-writecurrent
rsIpRipFilterLclNetworkMaskBits
OBJECT-TYPE
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
1.3.6.1.4.1.3955.1000.201.26.8.2.1.6INTEGERread-writecurrent
rsIpRipFilterLclMatchBits
OBJECT-TYPE
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.
1.3.6.1.4.1.3955.1000.201.26.8.2.1.7INTEGERread-writecurrent
rsIpRipFilterLclAction
OBJECT-TYPE
Filter action - permit/deny
1.3.6.1.4.1.3955.1000.201.26.8.2.1.8INTEGER {deny(1), permit(2)}read-writecurrent
rlIpRoutingProtPreferenceDirect
OBJECT-TYPE
The Preference given to routes whose origin is Local IP (i.e. IP interface in IpAddrTable) It is proposed that the value will be higher than dynamic routing protocols. The change of its value may lead to unexpected results, such as routing loops
1.3.6.1.4.1.3955.1000.201.26.13.1INTEGER (0..254)read-writecurrent
rlIpRoutingProtPreferenceStatic
OBJECT-TYPE
The Preference given to routes whose origin is Men configured by Net managment tools, i.e. Command line or SNMP configured.
1.3.6.1.4.1.3955.1000.201.26.13.2INTEGER (0..255)read-writecurrent
rlIpRoutingProtPreferenceOspfInter
OBJECT-TYPE
The Preference given to routes whose origin is internal ospf Links. Relate to routes which are based on OSPF Link State Advertisements of type 1-4
1.3.6.1.4.1.3955.1000.201.26.13.3INTEGER (0..255)read-writecurrent
rlIpRoutingProtPreferenceOspfExt
OBJECT-TYPE
The Preference given to routes whose origin is external to OSPF i.e. routes imported by as OSPF AS Border router. Relate to routes which are based on OSPF Link State Advertisements of types 5 and 7
1.3.6.1.4.1.3955.1000.201.26.13.4INTEGER (0..255)read-writecurrent
rlIpRoutingProtPreferenceOspfReject
OBJECT-TYPE
The Preference given to routes whose origin is OSPF and Are inserted to cover gaps in net range
1.3.6.1.4.1.3955.1000.201.26.13.5INTEGER (0..255)read-writecurrent
rlIpRoutingProtPreferenceRipNormal
OBJECT-TYPE
The Preference given to routes whose origin is RIP routing domain
1.3.6.1.4.1.3955.1000.201.26.13.6INTEGER (0..255)read-writecurrent
rlIpRoutingProtPreferenceRipAggregate
OBJECT-TYPE
The Preference given to routes whose origin is aggregation As a method of rip1 to handle the CIDR schema. The idea is that ripv1 aggregates route which fall into certion class of IP. This route is a discard route in effect, and is referenced, at forwarding route look up, if there is no beter match. (which means the route is not available)
1.3.6.1.4.1.3955.1000.201.26.13.7INTEGER (0..255)read-writecurrent
rlIpRoutingProtPreferenceBgp
OBJECT-TYPE
The Preference given to routes whose origin is BGP ROUTERS (EBGP or IBGP)
1.3.6.1.4.1.3955.1000.201.26.13.8INTEGER (0..255)read-writecurrent
rlOspfMibVersion
OBJECT-TYPE
MIB's version, the current version is 1.
1.3.6.1.4.1.3955.1000.201.26.14.1INTEGERread-onlycurrent
rlOspfAutoInterfaceCreation
OBJECT-TYPE
This variable controls OSPF automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of OSPF Interface. If value is disable OSPF interface is created but not activated. The option is a platform parameter.
1.3.6.1.4.1.3955.1000.201.26.14.2INTEGER {enable(1), disable(2)}read-onlycurrent
rlOspfIfExtTable
OBJECT-TYPE
The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
1.3.6.1.4.1.3955.1000.201.26.14.3not-accessiblecurrent
rlOspfIfExtEntry
OBJECT-TYPE
The OSPF interface table extension for md5 authentication
1.3.6.1.4.1.3955.1000.201.26.14.3.1not-accessiblecurrent
rlOspfifKeyChain
OBJECT-TYPE
Name of the key-chain which ospf interface uses for md5 authentication
1.3.6.1.4.1.3955.1000.201.26.14.3.1.1DisplayStringread-writecurrent
rlOspfRtrLnkTable
OBJECT-TYPE
Router Link State Advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.4not-accessiblecurrent
rlOspfRtrLnkEntry
OBJECT-TYPE
A single entry from Router LSA.
1.3.6.1.4.1.3955.1000.201.26.14.4.1not-accessiblecurrent
rlOspfRtrLnkAreaId
OBJECT-TYPE
The 32 bit identifier of the Area from which the LSA was received.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.1AreaIDread-onlycurrent
rlOspfRtrLnkLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.2IpAddressread-onlycurrent
rlOspfRtrLnkRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.3RouterIDread-onlycurrent
rlOspfRtrLnkIdx
OBJECT-TYPE
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.4Unsigned32 (1..65535)read-onlycurrent
rlOspfRtrLnkSequence
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.5Integer32read-onlycurrent
rlOspfRtrLnkAge
OBJECT-TYPE
This field is the age of the link state advertisement in seconds.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.6Integer32read-onlycurrent
rlOspfRtrLnkChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.7Integer32read-onlycurrent
rlOspfRtrLnkLength
OBJECT-TYPE
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.8Unsigned32read-onlycurrent
rlOspfRtrLnkBitV
OBJECT-TYPE
When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint).
1.3.6.1.4.1.3955.1000.201.26.14.4.1.9INTEGER {off(1), on(2)}read-onlycurrent
rlOspfRtrLnkBitE
OBJECT-TYPE
When set, the router is an AS boundary router (E is for external).
1.3.6.1.4.1.3955.1000.201.26.14.4.1.10INTEGER {off(1), on(2)}read-onlycurrent
rlOspfRtrLnkBitB
OBJECT-TYPE
When set, the router is an area border router (B is for border).
1.3.6.1.4.1.3955.1000.201.26.14.4.1.11INTEGER {off(1), on(2)}read-onlycurrent
rlOspfRtrLnkLinkID
OBJECT-TYPE
Identifies the object that this router link connects to. Value depends on the link's Type.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.13IpAddressread-onlycurrent
rlOspfRtrLnkLinkData
OBJECT-TYPE
Value depends on the link's Type field.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.14IpAddressread-onlycurrent
rlOspfRtrLnkType
OBJECT-TYPE
A quick description of the router link.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.15INTEGER {pointToPoint(1), transitNetwork(2), stubNetwork(3), virtualLink(4)}read-onlycurrent
rlOspfRtrLnkMetric
OBJECT-TYPE
The cost of using this router link.
1.3.6.1.4.1.3955.1000.201.26.14.4.1.16Unsigned32read-onlycurrent
rlOspfNetLnkTable
OBJECT-TYPE
Network Link State Advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.5not-accessiblecurrent
rlOspfNetLnkEntry
OBJECT-TYPE
A single entry from Network LSA.
1.3.6.1.4.1.3955.1000.201.26.14.5.1not-accessiblecurrent
rlOspfNetLnkAreaId
OBJECT-TYPE
The 32 bit identifier of the Area from which the LSA was received.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.1AreaIDread-onlycurrent
rlOspfNetLnkLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.2IpAddressread-onlycurrent
rlOspfNetLnkRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.3RouterIDread-onlycurrent
rlOspfNetLnkIdx
OBJECT-TYPE
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.4Unsigned32 (1..65535)read-onlycurrent
rlOspfNetLnkSequence
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.5Integer32read-onlycurrent
rlOspfNetLnkAge
OBJECT-TYPE
This field is the age of the link state advertisement in seconds.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.6Integer32read-onlycurrent
rlOspfNetLnkChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.7Integer32read-onlycurrent
rlOspfNetLnkLength
OBJECT-TYPE
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.8Unsigned32read-onlycurrent
rlOspfNetLnkMask
OBJECT-TYPE
The IP address mask for the network.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.9IpAddressread-onlycurrent
rlOspfNetLnkAttRouter
OBJECT-TYPE
The Router IDs of each of the routers attached to the network.
1.3.6.1.4.1.3955.1000.201.26.14.5.1.10IpAddressread-onlycurrent
rlOspfSumLnkTable
OBJECT-TYPE
Summary Link State Advertisement for network (Type 3).
1.3.6.1.4.1.3955.1000.201.26.14.6not-accessiblecurrent
rlOspfSumLnkEntry
OBJECT-TYPE
A single entry from Summary LSA.
1.3.6.1.4.1.3955.1000.201.26.14.6.1not-accessiblecurrent
rlOspfSumLnkAreaId
OBJECT-TYPE
The 32 bit identifier of the Area from which the LSA was received.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.1AreaIDread-onlycurrent
rlOspfSumLnkLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.2IpAddressread-onlycurrent
rlOspfSumLnkRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.3RouterIDread-onlycurrent
rlOspfSumLnkSequence
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.4Integer32read-onlycurrent
rlOspfSumLnkAge
OBJECT-TYPE
This field is the age of the link state advertisement in seconds.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.5Integer32read-onlycurrent
rlOspfSumLnkChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.6Integer32read-onlycurrent
rlOspfSumLnkLength
OBJECT-TYPE
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.7Unsigned32read-onlycurrent
rlOspfSumLnkMask
OBJECT-TYPE
Value depends on the link's Type field.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.8IpAddressread-onlycurrent
rlOspfSumLnkMetric
OBJECT-TYPE
The cost of using this router link.
1.3.6.1.4.1.3955.1000.201.26.14.6.1.9Unsigned32read-onlycurrent
rlOspfAsbLnkTable
OBJECT-TYPE
Summary Link State Advertisement for ASBR (Type 4).
1.3.6.1.4.1.3955.1000.201.26.14.7not-accessiblecurrent
rlOspfAsbLnkEntry
OBJECT-TYPE
A single entry from Summary LSA.
1.3.6.1.4.1.3955.1000.201.26.14.7.1not-accessiblecurrent
rlOspfAsbLnkAreaId
OBJECT-TYPE
The 32 bit identifier of the Area from which the LSA was received.
1.3.6.1.4.1.3955.1000.201.26.14.7.1.1AreaIDread-onlycurrent
rlOspfAsbLnkLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.7.1.2IpAddressread-onlycurrent
rlOspfAsbLnkRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.3955.1000.201.26.14.7.1.3RouterIDread-onlycurrent
rlOspfAsbLnkSequence
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.7.1.4Integer32read-onlycurrent
rlOspfAsbLnkAge
OBJECT-TYPE
This field is the age of the link state advertisement in seconds.
1.3.6.1.4.1.3955.1000.201.26.14.7.1.5Integer32read-onlycurrent
rlOspfAsbLnkChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.3955.1000.201.26.14.7.1.6Integer32read-onlycurrent
rlOspfAsbLnkLength
OBJECT-TYPE
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
1.3.6.1.4.1.3955.1000.201.26.14.7.1.7Unsigned32read-onlycurrent
rlOspfAsbLnkMetric
OBJECT-TYPE
The cost of using this router link.
1.3.6.1.4.1.3955.1000.201.26.14.7.1.8Unsigned32read-onlycurrent
rlOspfAseLnkTable
OBJECT-TYPE
External Link State Advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.8not-accessiblecurrent
rlOspfAseLnkEntry
OBJECT-TYPE
A single entry from External LSA.
1.3.6.1.4.1.3955.1000.201.26.14.8.1not-accessiblecurrent
rlOspfAseLnkLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.1IpAddressread-onlycurrent
rlOspfAseLnkRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.2RouterIDread-onlycurrent
rlOspfAseLnkSequence
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.3Integer32read-onlycurrent
rlOspfAseLnkAge
OBJECT-TYPE
This field is the age of the link state advertisement in seconds.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.4Integer32read-onlycurrent
rlOspfAseLnkChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.5Integer32read-onlycurrent
rlOspfAseLnkLength
OBJECT-TYPE
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.6Unsigned32read-onlycurrent
rlOspfAseLnkMask
OBJECT-TYPE
Value depends on the link's Type field.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.7IpAddressread-onlycurrent
rlOspfAseLnkFrwAddress
OBJECT-TYPE
Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router).
1.3.6.1.4.1.3955.1000.201.26.14.8.1.8IpAddressread-onlycurrent
rlOspfAseLnkBitE
OBJECT-TYPE
The type of external metric. If bit E is set, the metric specified is a Type 2 external metric.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.9INTEGER {off(1), on(2)}read-onlycurrent
rlOspfAseLnkMetric
OBJECT-TYPE
The cost of this route.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.10Unsigned32read-onlycurrent
rlOspfAseLnkTag
OBJECT-TYPE
A 32-bit field attached to each external route.
1.3.6.1.4.1.3955.1000.201.26.14.8.1.11Unsigned32read-onlycurrent
rlospfVirtIfExtTable
OBJECT-TYPE
The Virtual Interface Table describes the virtual links that the OSPF Process is configured to carry on.
1.3.6.1.4.1.3955.1000.201.26.14.9not-accessiblecurrent
rlospfVirtIfExtEntry
OBJECT-TYPE
The OSPF virtual interface table extension for md5 authentication
1.3.6.1.4.1.3955.1000.201.26.14.9.1not-accessiblecurrent
rlospfVirtifKeyChain
OBJECT-TYPE
Name of the key-chain which ospf virtual interface uses for md5 authentication
1.3.6.1.4.1.3955.1000.201.26.14.9.1.1DisplayStringread-writecurrent