LEA-SMART-SPLITTER-MIB
- Registered at
- 1.3.6.1.4.1.14841.1.1
- Last updated
- 2002-10-04 00:00
- Organization
- www.leacom.fr
- Revisions
- 2002-09-26 00:00
- Namespace
- zhone
- Source file
LEA-SMART-SPLITTER-MIB- Digest
sha256:abf7e721e909612c5895cf369320465dfef32e43651d933159977fafc6f7058d
Description
LEA Smart Splitter Management Information Base
Contact
postal: Regis Urvoy 52/54 rue du capitaine Guynemer 92415 Courbevoie Cedex France email: regis.urvoy@leacom.fr
Imports
| From | Symbols |
|---|---|
| LEA-MIB | leaSplitters |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
LEA-MIB LEA-SMART-SPLITTER-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| splitterRelay OBJECT-IDENTITY | 1.3.6.1.4.1.14841.1.1.1 | |||
| relayActiveDuration OBJECT-TYPE Duration that a bypass relay is active in seconds. As a fail-safe mechanism, the relay will automatically return a line back to normal operational mode when this timer has expired. The same relay timer value will be used for every port. | 1.3.6.1.4.1.14841.1.1.1.1 | INTEGER (1..300) | read-write | current |
| numberOfActiveRelays OBJECT-TYPE Total count of active relays. The agent controls the number of active relays so that the maximum is not exceeded in order to keep power consumption down. | 1.3.6.1.4.1.14841.1.1.1.2 | INTEGER (1..15) | read-only | current |
| heartBeat OBJECT-TYPE This parameter returns a simply acknowledge following a request from the manager. | 1.3.6.1.4.1.14841.1.1.1.3 | INTEGER {ack(1)} | read-only | current |
| relayTable OBJECT-TYPE Table of relay status | 1.3.6.1.4.1.14841.1.1.1.4 | not-accessible | current | |
| relayTableEntry OBJECT-TYPE A row describing a relay status | 1.3.6.1.4.1.14841.1.1.1.4.1 | not-accessible | current | |
| relayIndex OBJECT-TYPE The index of the table. Its value is (relaySlot-1)*24+relayPort | 1.3.6.1.4.1.14841.1.1.1.4.1.1 | Integer32 | not-accessible | current |
| relaySlot OBJECT-TYPE The slot being addressed | 1.3.6.1.4.1.14841.1.1.1.4.1.2 | INTEGER {Slot-1(1), Slot-2(2), Slot-3(3), Slot-4(4), Slot-5(5), Slot-6(6), Slot-7(7), Slot-8(8), Slot-9(9), Slot-10(10), Slot-11(11), Slot-12(12), Slot-13(13), Slot-14(14), Slot-15(15)} | read-only | current |
| relayPort OBJECT-TYPE The port being addressed | 1.3.6.1.4.1.14841.1.1.1.4.1.3 | INTEGER {Port-1(1), Port-2(2), Port-3(3), Port-4(4), Port-5(5), Port-6(6), Port-7(7), Port-8(8), Port-9(9), Port-10(10), Port-11(11), Port-12(12), Port-13(13), Port-14(14), Port-15(15), Port-16(16), Port-17(17), Port-18(18), Port-19(19), Port-20(20), Port-21(21), Port-22(22), Port-23(23), Port-24(24)} | read-only | current |
| relayStatus OBJECT-TYPE This parameter describes whether a particular POTS line is in a normal or closed loop condition. By setting this parameter, the manager can switch the relays in order to bypass the LPF (Low Pass Filter) for POTS closed loop testing (closed) or force a relay back to normal operation mode before the Relay Active Duration timer times out (normal) | 1.3.6.1.4.1.14841.1.1.1.4.1.4 | INTEGER {normal(1), closed(2)} | read-write | current |
| relayResetAll OBJECT-TYPE This parameter would allow the operator to force a relay back to normal operation for all ports. | 1.3.6.1.4.1.14841.1.1.1.5 | INTEGER {unchanged(1), reset(2)} | read-write | current |
| relayChangeNotification OBJECT-TYPE This notification is sent to the manager after a line status (or relay) change. It takes three parameters : the slot (relaySlot) and port (relayPort) of the line, and its new status (relayStatus) | 1.3.6.1.4.1.14841.1.1.1.6 | SnmpAdminString | accessible-for-notify | current |