MIBs Depot

LANTRONIX-SLC-MIB

Registered at
1.3.6.1.4.1.244.1.1
Last updated
2016-04-17 00:00
Organization
Lantronix, Inc.
Revisions
2016-04-17 00:00, 2015-02-24 00:00, 2014-07-10 00:00, 2013-12-06 00:00, 2013-02-20 00:00, 2010-04-07 00:00, 2010-01-19 00:00, 2009-12-09 00:00, 2008-01-09 00:00, 2007-06-25 00:00, 2007-02-20 00:00, 2007-02-07 00:00, 2006-10-20 00:00, 2006-07-14 00:00, 2006-05-12 00:00, 2006-02-13 00:00, 2005-10-03 00:00, 2005-06-09 00:00, 2004-12-13 00:00
Namespace
lantronix
Source file
LANTRONIX-SLC-MIB
Digest
sha256:9125a1e311b9cd7741122eda371c3ad533ad9fa0f5b9c7dd300813ff981f730c

Description

MIB module for managing Lantronix Secure Console Managers and Advanced Console Managers

Contact

Lantronix Technical Support 167 Technology Drive Irvine, CA 92618 USA +1 800 526-8766 snmp@lantronix.com

Imports

FromSymbols
IPV6-TCIpv6Address
LANTRONIX-MIBproducts
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IPV6-TC
LANTRONIX-MIB
LANTRONIX-SLC-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
AuthOrder
TEXTUAL-CONVENTION
Authentication order for a remote authentication method. If the authentication method is disabled, AuthOrder = 0.
current
EnabledState
TEXTUAL-CONVENTION
The enabled/disabled state of an SLC feature.
current
RPMOutletIndex
TEXTUAL-CONVENTION
The unique identifier for an RPM outlet.
current
RPMTowerIndex
TEXTUAL-CONVENTION
The unique identifier for an RPM tower or unit.
current
SyslogLevel
TEXTUAL-CONVENTION
Syslog logging levels
current
TimeoutDataDirection
TEXTUAL-CONVENTION
The direction of data used to determine if a connection has timed out.
current
UserGroup
TEXTUAL-CONVENTION
The group assigned to a user. Each group has a set of user rights associated with it.
current
UserRights
TEXTUAL-CONVENTION
The rights assigned to a user. Each group has a set of user rights associated with it. The string is a comma-separated list of rights: ad - full administrative rights do - Device Ports operations dp - configure Device Ports dr - Diagnostics and Reports dt - configure Date and Time fc - manage Firmware and Configurations lu - configure Local Users md - configure Internal Modem nt - configure Networking pc - configure PC Card ra - configure Remote Authentication rp - manage Remote Power Managers rs - Reboot or Shutdown the SLC sd - manage SD Card sk - configure SSH Keys sn - configure Secure Ltx Network sv - configure Services ub - configure USB Devices um - configure User Menus wb - Web Access
current

Objects

NameOIDSyntaxAccessStatus
slcEvents
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.0
slcNetwork
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.1
slcNetEth
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.1.1
slcNetEthIfNumber
OBJECT-TYPE
The number of entries in the Ethernet interface table.
1.3.6.1.4.1.244.1.1.1.1.1Integer32 (1..2)read-onlycurrent
slcNetEthIfTable
OBJECT-TYPE
Table of Ethernet network entries. The number of entries is given by the value of slcNetEthIfNumber.
1.3.6.1.4.1.244.1.1.1.1.2not-accessiblecurrent
slcNetEthIfEntry
OBJECT-TYPE
An entry with the attributes for each Ethernet interface. Ethernet Port Eth1 is always index 1, and Eth2 is always index 2.
1.3.6.1.4.1.244.1.1.1.1.2.1not-accessiblecurrent
slcNetEthIfIndex
OBJECT-TYPE
Reference index for each Ethernet interface.
1.3.6.1.4.1.244.1.1.1.1.2.1.1Integer32 (1..2)read-onlycurrent
slcNetEthIfSource
OBJECT-TYPE
The state/source for the IP Address and subnet mask for the Ethernet interface.
1.3.6.1.4.1.244.1.1.1.1.2.1.2INTEGER {disabled(1), dhcp(2), bootp(3), static(4)}read-onlycurrent
slcNetEthIfMode
OBJECT-TYPE
The speed and duplex for the Ethernet interface.
1.3.6.1.4.1.244.1.1.1.1.2.1.3INTEGER {autoNegotiate(1), halfDuplex10mbit(2), fullDuplex10mbit(3), halfDuplex100mbit(4), fullDuplex100mbit(5), halfDuplex1000mbit(6), fullDuplex1000mbit(7)}read-onlycurrent
slcNetEthIfIPv6Addr
OBJECT-TYPE
The IPv6 Address for each Ethernet interface.
1.3.6.1.4.1.244.1.1.1.1.2.1.4Ipv6Addressread-onlycurrent
slcNetEthIfIPv6PrefixLength
OBJECT-TYPE
The length of the prefix for slcNetEthIfIPv6Addr (in bits).
1.3.6.1.4.1.244.1.1.1.1.2.1.5INTEGER (0..128)not-accessiblecurrent
slcNetEthIfMTU
OBJECT-TYPE
The Maximum Transmission Unit for the Ethernet interface.
1.3.6.1.4.1.244.1.1.1.1.2.1.6Integer32read-onlycurrent
slcNetEthIfMacAddress
OBJECT-TYPE
The MAC Address for the Ethernet interface.
1.3.6.1.4.1.244.1.1.1.1.2.1.7MacAddressread-onlycurrent
slcNetEthGateway
OBJECT-TYPE
The gateway for routing non-Eth1 and non-Eth2 network IPv4 traffic.
1.3.6.1.4.1.244.1.1.1.1.3IpAddressread-onlycurrent
slcNetEthGatewayPrecedence
OBJECT-TYPE
The gateway to give precedence to, if both a static gateway is set, and a gateway is acquired via DHCP or a GPRS Modem.
1.3.6.1.4.1.244.1.1.1.1.4INTEGER {dhcp(1), default(2), gprs(3)}read-onlycurrent
slcNetEthKeepaliveStartProbes
OBJECT-TYPE
TCP keepalive timer: number of seconds to wait before sending out the initial probe.
1.3.6.1.4.1.244.1.1.1.1.5Integer32 (1..99999)read-onlycurrent
slcNetEthKeepaliveNumberOfProbes
OBJECT-TYPE
TCP keepalive timer: number of probes to send out after the initial probe.
1.3.6.1.4.1.244.1.1.1.1.6Integer32 (1..20)read-onlycurrent
slcNetEthKeepaliveInterval
OBJECT-TYPE
TCP keepalive timer: number of seconds between probes.
1.3.6.1.4.1.244.1.1.1.1.7Integer32 (1..9999)read-onlycurrent
slcNetEthIPForwarding
OBJECT-TYPE
If enabled, IP forwarding is used.
1.3.6.1.4.1.244.1.1.1.1.8EnabledStateread-onlycurrent
slcNetEthDNS1
OBJECT-TYPE
The IPv4 Address of DNS server #1.
1.3.6.1.4.1.244.1.1.1.1.9IpAddressread-onlycurrent
slcNetEthDNS2
OBJECT-TYPE
The IPv4 Address of DNS server #2.
1.3.6.1.4.1.244.1.1.1.1.10IpAddressread-onlycurrent
slcNetEthDNS3
OBJECT-TYPE
The IPv4 Address of DNS server #3.
1.3.6.1.4.1.244.1.1.1.1.11IpAddressread-onlycurrent
slcNetEthDomain
OBJECT-TYPE
The SLC domain name.
1.3.6.1.4.1.244.1.1.1.1.12OCTET STRINGread-onlycurrent
slcNetEthAlternateGateway
OBJECT-TYPE
The alternate gateway for routing non-Eth1 and non-Eth2 network traffic. The alternate gateway is used if an IP Address usually accessible through the default gateway fails to return one or more pings.
1.3.6.1.4.1.244.1.1.1.1.13IpAddressread-onlycurrent
slcNetEthPingIPAddress
OBJECT-TYPE
The IP Address to ping to determine if the alternate gateway should be used.
1.3.6.1.4.1.244.1.1.1.1.14IpAddressread-onlycurrent
slcNetEthPingInterface
OBJECT-TYPE
The Ethernet interface used to determine if the alternate gateway should be used.
1.3.6.1.4.1.244.1.1.1.1.15INTEGER {ethernet1(1), ethernet2(2)}read-onlycurrent
slcNetEthPingDelay
OBJECT-TYPE
The delay, in seconds, between pings used to determine if the alternate gateway should be used.
1.3.6.1.4.1.244.1.1.1.1.16Integer32 (1..250)read-onlycurrent
slcNetEthPingFailed
OBJECT-TYPE
The number of pings with no response required for the alternate gateway to be used.
1.3.6.1.4.1.244.1.1.1.1.17Integer32 (1..250)read-onlycurrent
slcNetEthBonding
OBJECT-TYPE
The Ethernet network redundancy/load balancing setting.
1.3.6.1.4.1.244.1.1.1.1.18INTEGER {disabled(1), activeBackup(2), aggregation(3), adaptiveLoadBalancing(4)}read-onlycurrent
slcNetEthIPv6
OBJECT-TYPE
If enabled, IPv6 is enabled.
1.3.6.1.4.1.244.1.1.1.1.19EnabledStateread-onlycurrent
slcNetEthGatewayIPv6
OBJECT-TYPE
The default gateway for routing non-Eth1 and non-Eth2 IPv6 network traffic.
1.3.6.1.4.1.244.1.1.1.1.20Ipv6Addressread-onlycurrent
slcNetEthDNS1IPv6
OBJECT-TYPE
The IPv6 Address of DNS server #1.
1.3.6.1.4.1.244.1.1.1.1.21Ipv6Addressread-onlycurrent
slcNetEthDNS2IPv6
OBJECT-TYPE
The IPv6 Address of DNS server #2.
1.3.6.1.4.1.244.1.1.1.1.22Ipv6Addressread-onlycurrent
slcNetEthDNS3IPv6
OBJECT-TYPE
The IPv6 Address of DNS server #3.
1.3.6.1.4.1.244.1.1.1.1.23Ipv6Addressread-onlycurrent
slcNetEthPreferIPv4DNS
OBJECT-TYPE
If enabled, IPv4 DNS records will be preferred when DNS hostname lookups are performed. Otherwise IPv6 records will be preferred (when IPv6 is enabled).
1.3.6.1.4.1.244.1.1.1.1.24EnabledStateread-onlycurrent
slcNetFirewall
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.1.2
slcNetFirewallState
OBJECT-TYPE
If enabled, network traffic is filtered.
1.3.6.1.4.1.244.1.1.1.2.1EnabledStateread-onlycurrent
slcNetFirewallReject
OBJECT-TYPE
If enabled, returns a 'connection denied' message on blocked ports. If disabled, ignores attempts to connect to a blocked port. This object is deprecated.
1.3.6.1.4.1.244.1.1.1.2.2INTEGER {return(1), ignore(2)}read-onlyobsolete
slcNetFirewallPing
OBJECT-TYPE
If enabled, the SLC is invisible to pings. This object is deprecated.
1.3.6.1.4.1.244.1.1.1.2.3EnabledStateread-onlyobsolete
slcNetFirewallSSH
OBJECT-TYPE
If enabled, the SSH port is open. If disabled, the SSH port is blocked to network traffic. This object is deprecated.
1.3.6.1.4.1.244.1.1.1.2.4EnabledStateread-onlyobsolete
slcNetFirewallTelnet
OBJECT-TYPE
If enabled, the Telnet port is open. If disabled, the Telnet port is blocked to network traffic. This object is deprecated.
1.3.6.1.4.1.244.1.1.1.2.5EnabledStateread-onlyobsolete
slcNetFirewallHTTP
OBJECT-TYPE
If enabled, the HTTP port is open. If disabled, the HTTP port is blocked to network traffic. This object is deprecated.
1.3.6.1.4.1.244.1.1.1.2.6EnabledStateread-onlyobsolete
slcNetFirewallHTTPS
OBJECT-TYPE
If enabled, the HTTPS port is open. If disabled, the HTTPS port is blocked to network traffic. This object is deprecated.
1.3.6.1.4.1.244.1.1.1.2.7EnabledStateread-onlyobsolete
slcNetFirewallSMBCIFS
OBJECT-TYPE
If enabled, the SMBCIFS port is open. If disabled, the SMBCIFS port is blocked to network traffic. This object is deprecated.
1.3.6.1.4.1.244.1.1.1.2.8EnabledStateread-onlyobsolete
slcNetFirewallRulesetNumber
OBJECT-TYPE
The number of entries in the IP Filter Ruleset table.
1.3.6.1.4.1.244.1.1.1.2.9Integer32 (0..64)read-onlycurrent
slcNetFirewallRulesetTable
OBJECT-TYPE
Table of IP Filter Rulesets. The number of entries is given by the value of slcNetFirewallRulesetNumber.
1.3.6.1.4.1.244.1.1.1.2.10not-accessiblecurrent
slcNetFirewallRulesetEntry
OBJECT-TYPE
An entry with all the attributes, including the rules, for an IP Filter Ruleset.
1.3.6.1.4.1.244.1.1.1.2.10.1not-accessiblecurrent
slcNetFirewallRulesetIndex
OBJECT-TYPE
Reference index for each IP Filter Ruleset.
1.3.6.1.4.1.244.1.1.1.2.10.1.1Integer32 (1..64)read-onlycurrent
slcNetFirewallRulesetName
OBJECT-TYPE
The name assigned to the IP Filter Ruleset.
1.3.6.1.4.1.244.1.1.1.2.10.1.2OCTET STRINGread-onlycurrent
slcNetFirewallRulesetNumRules
OBJECT-TYPE
The number of rules in the slcNetFirewallRulesetRules string.
1.3.6.1.4.1.244.1.1.1.2.10.1.3Integer32 (1..32)read-onlycurrent
slcNetFirewallRulesetRules
OBJECT-TYPE
The IP Filter rules that are defined for the Ruleset. The rule format is <IP>/<Mask Bits>;<Protocol>;<Ports>;<Action> and rules are separated by a colon. If the string is truncated because of system limitations, the string will be terminated with two colons.
1.3.6.1.4.1.244.1.1.1.2.10.1.4OCTET STRINGread-onlycurrent
slcNetFirewallMappingNumber
OBJECT-TYPE
The number of entries in the IP Filter Mapping table.
1.3.6.1.4.1.244.1.1.1.2.11Integer32read-onlycurrent
slcNetFirewallMappingTable
OBJECT-TYPE
Table of mappings between IP Filter Rulesets and interfaces. The number of entries is given by the value of slcNetFirewallMappingNumber.
1.3.6.1.4.1.244.1.1.1.2.12not-accessiblecurrent
slcNetFirewallMappingEntry
OBJECT-TYPE
An entry defining an interface that has an IP Filter Ruleset assigned to it. The interface can be either an Ethernet interface or a PC Card or Device Port modem.
1.3.6.1.4.1.244.1.1.1.2.12.1not-accessiblecurrent
slcNetFirewallMappingIndex
OBJECT-TYPE
Reference index for each IP Filter mapping.
1.3.6.1.4.1.244.1.1.1.2.12.1.1Integer32 (1..64)read-onlycurrent
slcNetFirewallMappingIfac
OBJECT-TYPE
The interface which has an IP Filter Ruleset assigned to it. If the interface is devicePort or usbPort, slcNetFirewallMappingIfacId defines which Device Port or USB Port (with an attached modem) the Ruleset is assigned to.
1.3.6.1.4.1.244.1.1.1.2.12.1.2INTEGER {ethernet1(1), ethernet2(2), upperPCCard(3), lowerPCCard(4), devicePort(5), usbPort(6), internalModem(7)}read-onlycurrent
slcNetFirewallMappingIfacId
OBJECT-TYPE
The identifier for a Device Port if slcNetFirewallMappingIfac equals devicePort(5), or the identifier for a USB Port if slcNetFirewallMappingIfac equals usbPort. Otherwise equals zero.
1.3.6.1.4.1.244.1.1.1.2.12.1.3Integer32 (0..48)read-onlycurrent
slcNetFirewallMappingRuleset
OBJECT-TYPE
The name of the IP Filter Ruleset assigned to the interface.
1.3.6.1.4.1.244.1.1.1.2.12.1.4OCTET STRINGread-onlycurrent
slcNetRouting
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.1.3
slcNetRouteRIPState
OBJECT-TYPE
If enabled, the Routing Information Protocol (RIP) is used.
1.3.6.1.4.1.244.1.1.1.3.1EnabledStateread-onlycurrent
slcNetRouteRIPVersion
OBJECT-TYPE
The version of RIP being used.
1.3.6.1.4.1.244.1.1.1.3.2INTEGER {one(1), two(2), oneAndTwo(3)}read-onlycurrent
slcNetRouteStaticState
OBJECT-TYPE
If enabled, static routing is used.
1.3.6.1.4.1.244.1.1.1.3.3EnabledStateread-onlycurrent
slcNetRouteStaticNumber
OBJECT-TYPE
The number of entries in the Static Routes table.
1.3.6.1.4.1.244.1.1.1.3.4Integer32 (0..64)read-onlycurrent
slcNetRouteStaticTable
OBJECT-TYPE
Table of static route entries. The number of entries is given by the value of slcNetRouteStaticNumber.
1.3.6.1.4.1.244.1.1.1.3.5not-accessiblecurrent
slcNetRouteStaticEntry
OBJECT-TYPE
An entry with the IP Address, subnet mask, and gateway for a static route.
1.3.6.1.4.1.244.1.1.1.3.5.1not-accessiblecurrent
slcNetRouteStaticIndex
OBJECT-TYPE
Reference index for each static route.
1.3.6.1.4.1.244.1.1.1.3.5.1.1Integer32 (1..64)read-onlycurrent
slcNetRouteStaticIP
OBJECT-TYPE
The IP Address for the static route.
1.3.6.1.4.1.244.1.1.1.3.5.1.2IpAddressread-onlycurrent
slcNetRouteStaticMask
OBJECT-TYPE
The subnet mask for the static route.
1.3.6.1.4.1.244.1.1.1.3.5.1.3IpAddressread-onlycurrent
slcNetRouteStaticGateway
OBJECT-TYPE
The gateway for the static route.
1.3.6.1.4.1.244.1.1.1.3.5.1.4IpAddressread-onlycurrent
slcNetVPN
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.1.4
slcNetVPNTunnel
OBJECT-TYPE
If enabled, the SLC is configured to initiate a VPN tunnel.
1.3.6.1.4.1.244.1.1.1.4.1EnabledStateread-onlycurrent
slcNetVPNStatus
OBJECT-TYPE
A string giving the current status of the VPN tunnel.
1.3.6.1.4.1.244.1.1.1.4.2OCTET STRINGread-onlycurrent
slcNetVPNName
OBJECT-TYPE
The name of the VPN tunnel.
1.3.6.1.4.1.244.1.1.1.4.3OCTET STRING (SIZE(0..20))read-onlycurrent
slcNetVPNEthPort
OBJECT-TYPE
The Ethernet interface used for the VPN tunnel.
1.3.6.1.4.1.244.1.1.1.4.4INTEGER {ethernet1(1), ethernet2(2)}read-onlycurrent
slcNetVPNRemoteHost
OBJECT-TYPE
The IP Address of the host on the remote side of the tunnel.
1.3.6.1.4.1.244.1.1.1.4.5IpAddressread-onlycurrent
slcNetVPNRemoteId
OBJECT-TYPE
How the remote host should be identified for authentication.
1.3.6.1.4.1.244.1.1.1.4.6OCTET STRING (SIZE(0..20))read-onlycurrent
slcNetVPNRemoteHop
OBJECT-TYPE
If the remote host is behind a gateway, this specifies the IP Address of the gateway's public network interface.
1.3.6.1.4.1.244.1.1.1.4.7IpAddressread-onlycurrent
slcNetVPNRemoteSubnet
OBJECT-TYPE
One or more subnets behind the remote host, expressed in CIDR notation (IP Address/mask bits). Multiple subnets are separated by a comma.
1.3.6.1.4.1.244.1.1.1.4.8OCTET STRINGread-onlycurrent
slcNetVPNLocalId
OBJECT-TYPE
How the SLC should be identified for authentication.
1.3.6.1.4.1.244.1.1.1.4.9OCTET STRING (SIZE(0..20))read-onlycurrent
slcNetVPNLocalHop
OBJECT-TYPE
If the SLC is behind a gateway, this specifies the IP Address of the gateway's public network interface.
1.3.6.1.4.1.244.1.1.1.4.10IpAddressread-onlycurrent
slcNetVPNLocalSubnet
OBJECT-TYPE
One or more subnets behind the SLC, expressed in CIDR notation (IP Address/mask bits). Multiple subnets are separated by a comma.
1.3.6.1.4.1.244.1.1.1.4.11OCTET STRINGread-onlycurrent
slcNetVPNIKENegotiation
OBJECT-TYPE
The type of mode used by the SLC and the remote host for the IKE protocol, which exchanges security options between two hosts which want to communicate via IPSec.
1.3.6.1.4.1.244.1.1.1.4.12INTEGER {main(1), aggressive(2)}read-onlycurrent
slcNetVPNIKEEncryption
OBJECT-TYPE
The type of encryption used for IKE negotiation.
1.3.6.1.4.1.244.1.1.1.4.13INTEGER {any(1), tripledes(2), aes(3)}read-onlycurrent
slcNetVPNIKEAuthentication
OBJECT-TYPE
The type of authentication used for IKE negotiation.
1.3.6.1.4.1.244.1.1.1.4.14INTEGER {any(1), sha1(2), md5(3)}read-onlycurrent
slcNetVPNIKEDHGroup
OBJECT-TYPE
The type of Diffie-Hellman Group used for IKE negotiation.
1.3.6.1.4.1.244.1.1.1.4.15INTEGER {any(1), dhg2(2), dhg5(3)}read-onlycurrent
slcNetVPNESPEncryption
OBJECT-TYPE
The type of encryption used for encrypting data sent through the tunnel.
1.3.6.1.4.1.244.1.1.1.4.16INTEGER {any(1), tripledes(2), aes(3)}read-onlycurrent
slcNetVPNESPAuthentication
OBJECT-TYPE
The type of authentication used for authenticating data sent through the VPN tunnel.
1.3.6.1.4.1.244.1.1.1.4.17INTEGER {any(1), sha1(2), md5(3)}read-onlycurrent
slcNetVPNESPDHGroup
OBJECT-TYPE
The type of Diffie-Hellman Group used for the key exchange for data sent through the tunnel.
1.3.6.1.4.1.244.1.1.1.4.18INTEGER {any(1), dhg2(2), dhg5(3)}read-onlycurrent
slcNetVPNAuthentication
OBJECT-TYPE
The type of authentication used by the host on each side of the tunnel to verify the identify of the other host.
1.3.6.1.4.1.244.1.1.1.4.19INTEGER {rsaPublicKey(1), preSharedKey(2)}read-onlycurrent
slcNetVPNPerfectForwardSecrecy
OBJECT-TYPE
When a new IPSec SA is negotiated after the IPSec SA lifetime expires, a new Diffie-Hellman key exchange can be performed to generate a new session key to be used to encrypt the data being sent through the tunnel. If this is enabled, it provides greater security, since the old session keys are destroyed.
1.3.6.1.4.1.244.1.1.1.4.20EnabledStateread-onlycurrent
slcNetVPNModeConfigClient
OBJECT-TYPE
If this is enabled, the SLC can receive network configuration from the remote host. This allows the remote host to assign an IP address/netmask to the SLC side of the VPN tunnel.
1.3.6.1.4.1.244.1.1.1.4.21EnabledStateread-onlycurrent
slcNetVPNXAUTHClient
OBJECT-TYPE
If this is enabled, the SLC will send authentication credentials to the remote host if they are requested. XAUTH, or Extended Authentication, can be used as an additional security measure on top of the Pre-Shared Key or RSA Public Key.
1.3.6.1.4.1.244.1.1.1.4.22EnabledStateread-onlycurrent
slcNetVPNXAUTHClientLogin
OBJECT-TYPE
If slcNetVPNXAUTHClientLogin is enabled, this is the login used for authentication.
1.3.6.1.4.1.244.1.1.1.4.23OCTET STRINGread-onlycurrent
slcNetSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.1.5
slcNetSecurityFIPSMode
OBJECT-TYPE
If enabled, the SLC is running in FIPS mode.
1.3.6.1.4.1.244.1.1.1.5.1EnabledStateread-onlycurrent
slcServices
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2
slcServNTP
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.1
slcServNTPState
OBJECT-TYPE
If enabled, NTP is used to synchronize SLC time with a network time server.
1.3.6.1.4.1.244.1.1.2.1.1EnabledStateread-onlycurrent
slcServNTPSynchronize
OBJECT-TYPE
The method used by the SLC to synchronize time: receive broadcasts from the NTP server, or poll the NTP server.
1.3.6.1.4.1.244.1.1.2.1.2INTEGER {broadcast(1), poll(2)}read-onlycurrent
slcServNTPPoll
OBJECT-TYPE
If slcServNTPSynchronize is set to poll, indicates whether a local server or a public server is used as the NTP server.
1.3.6.1.4.1.244.1.1.2.1.3INTEGER {local(1), public(2)}read-onlycurrent
slcServNTPServer
OBJECT-TYPE
The IPv4 Address of the local or public NTP server.
1.3.6.1.4.1.244.1.1.2.1.4IpAddressread-onlycurrent
slcServNTPLocalServer2
OBJECT-TYPE
The IPv4 Address of the 2nd local NTP server.
1.3.6.1.4.1.244.1.1.2.1.5IpAddressread-onlycurrent
slcServNTPLocalServer3
OBJECT-TYPE
The IPv4 Address of the 3rd local NTP server.
1.3.6.1.4.1.244.1.1.2.1.6IpAddressread-onlycurrent
slcServNTPServerIPv6
OBJECT-TYPE
The IPv6 Address of the local NTP server.
1.3.6.1.4.1.244.1.1.2.1.7Ipv6Addressread-onlycurrent
slcServNTPLocalServer2IPv6
OBJECT-TYPE
The IPv6 Address of the 2nd local NTP server.
1.3.6.1.4.1.244.1.1.2.1.8Ipv6Addressread-onlycurrent
slcServNTPLocalServer3IPv6
OBJECT-TYPE
The IPv6 Address of the 3rd local NTP server.
1.3.6.1.4.1.244.1.1.2.1.9Ipv6Addressread-onlycurrent
slcServSyslog
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.2
slcServSysNetworkLevel
OBJECT-TYPE
The logging level for Network messages.
1.3.6.1.4.1.244.1.1.2.2.1SyslogLevelread-onlycurrent
slcServSysServicesLevel
OBJECT-TYPE
The logging level for Services messages.
1.3.6.1.4.1.244.1.1.2.2.2SyslogLevelread-onlycurrent
slcServSysAuthLevel
OBJECT-TYPE
The logging level for Authentication messages.
1.3.6.1.4.1.244.1.1.2.2.3SyslogLevelread-onlycurrent
slcServSysDevPortLevel
OBJECT-TYPE
The logging level for Device Port messages.
1.3.6.1.4.1.244.1.1.2.2.4SyslogLevelread-onlycurrent
slcServSysDiagLevel
OBJECT-TYPE
The logging level for Diagnostic messages.
1.3.6.1.4.1.244.1.1.2.2.5SyslogLevelread-onlycurrent
slcServSysGeneralLevel
OBJECT-TYPE
The logging level for General system messages.
1.3.6.1.4.1.244.1.1.2.2.6SyslogLevelread-onlycurrent
slcServSysRemoteServer
OBJECT-TYPE
The IPv4 Address of the remote Syslog Server.
1.3.6.1.4.1.244.1.1.2.2.7IpAddressread-onlycurrent
slcServSysRemoteServer2
OBJECT-TYPE
The IPv4 Address of the secondary remote Syslog Server.
1.3.6.1.4.1.244.1.1.2.2.8IpAddressread-onlycurrent
slcServSysRemoteServerIPv6
OBJECT-TYPE
The IPv6 Address of the remote Syslog Server.
1.3.6.1.4.1.244.1.1.2.2.9Ipv6Addressread-onlycurrent
slcServSysRemoteServer2IPv6
OBJECT-TYPE
The IPv6 Address of the secondary remote Syslog Server.
1.3.6.1.4.1.244.1.1.2.2.10Ipv6Addressread-onlycurrent
slcServSysRPMLogSize
OBJECT-TYPE
The maximum size in Kilobytes that RPM logs can grow to before they are pruned. When the file is pruned, it will be pruned to 50% of the RPM Log Size.
1.3.6.1.4.1.244.1.1.2.2.11Integer32 (5..40)read-onlycurrent
slcServSysOtherLogSize
OBJECT-TYPE
The maximum size in Kilobytes that all logs other than RPM logs can grow to before they are pruned. When the file is pruned, it will be pruned to 50% of the RPM Log Size.
1.3.6.1.4.1.244.1.1.2.2.12Integer32 (5..40)read-onlycurrent
slcServAuditLog
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.3
slcServAuditState
OBJECT-TYPE
If enabled, logs all configuration changes to an audit log.
1.3.6.1.4.1.244.1.1.2.3.1EnabledStateread-onlycurrent
slcServAuditSize
OBJECT-TYPE
The maximum size of the audit login in Kilobytes.
1.3.6.1.4.1.244.1.1.2.3.2Integer32 (5..500)read-onlycurrent
slcServAuditIncludeCLI
OBJECT-TYPE
If enabled, all CLI commands are included in the audit log in addition to a description of the configuration change.
1.3.6.1.4.1.244.1.1.2.3.3EnabledStateread-onlycurrent
slcServAuditInSystemLog
OBJECT-TYPE
If enabled, all audit log entries are also sent to the system log.
1.3.6.1.4.1.244.1.1.2.3.4EnabledStateread-onlycurrent
slcServSSH
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.4
slcServSSHState
OBJECT-TYPE
If enabled, allows logins to the SLC CLI via SSH.
1.3.6.1.4.1.244.1.1.2.4.1EnabledStateread-onlycurrent
slcServSSHTimeout
OBJECT-TYPE
The timeout (in minutes) for SSH connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.2.4.2Integer32 (0..30)read-onlycurrent
slcServSSHWebSSH
OBJECT-TYPE
If enabled, allows Web SSH access to the CLI and the Device Ports.
1.3.6.1.4.1.244.1.1.2.4.3EnabledStateread-onlycurrent
slcServSSHPort
OBJECT-TYPE
The TCP Port number for incoming SSH sessions to the SLC CLI.
1.3.6.1.4.1.244.1.1.2.4.4Integer32 (0..65535)read-onlycurrent
slcServSSHV1Incoming
OBJECT-TYPE
If enabled, incoming SSH version 1 connections are allowed.
1.3.6.1.4.1.244.1.1.2.4.5EnabledStateread-onlycurrent
slcServSSHTimeoutDataDirection
OBJECT-TYPE
If slcServSSHTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
1.3.6.1.4.1.244.1.1.2.4.6TimeoutDataDirectionread-onlycurrent
slcServSSHDSAKeys
OBJECT-TYPE
If enabled, SSH will support DSA keys for incoming and outgoing connections.
1.3.6.1.4.1.244.1.1.2.4.7EnabledStateread-onlycurrent
slcServTelnet
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.5
slcServTelnetState
OBJECT-TYPE
If enabled, allows logins to the SLC CLI via Telnet.
1.3.6.1.4.1.244.1.1.2.5.1EnabledStateread-onlycurrent
slcServTelnetTimeout
OBJECT-TYPE
The timeout (in minutes) for Telnet connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.2.5.2Integer32 (0..30)read-onlycurrent
slcServTelnetWebTelnet
OBJECT-TYPE
If enabled, allows Web Telnet access to the CLI and the Device Ports.
1.3.6.1.4.1.244.1.1.2.5.3EnabledStateread-onlycurrent
slcServTelnetTelnetOut
OBJECT-TYPE
If enabled, allows outgoing Telnet connections.
1.3.6.1.4.1.244.1.1.2.5.4EnabledStateread-onlycurrent
slcServTelnetTimeoutDataDirection
OBJECT-TYPE
If slcServTelnetTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
1.3.6.1.4.1.244.1.1.2.5.5TimeoutDataDirectionread-onlycurrent
slcServSNMP
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.6
slcServSNMPState
OBJECT-TYPE
Enables the SNMP agent on the SLC.
1.3.6.1.4.1.244.1.1.2.6.1EnabledStateread-onlycurrent
slcServSNMPTraps
OBJECT-TYPE
If enabled, the SLC sends traps for key events.
1.3.6.1.4.1.244.1.1.2.6.2EnabledStateread-onlycurrent
slcServSNMPNMS
OBJECT-TYPE
The IPv4 Address of the Network Management System (NMS).
1.3.6.1.4.1.244.1.1.2.6.3IpAddressread-onlycurrent
slcServSNMPLocation
OBJECT-TYPE
The SNMP location for the SLC.
1.3.6.1.4.1.244.1.1.2.6.4OCTET STRINGread-onlycurrent
slcServSNMPContact
OBJECT-TYPE
The SNMP contact for the SLC.
1.3.6.1.4.1.244.1.1.2.6.5OCTET STRINGread-onlycurrent
slcServSNMPv3User
OBJECT-TYPE
The user name for read-only access to the SLC via SNMP v3.
1.3.6.1.4.1.244.1.1.2.6.6OCTET STRING (SIZE(1..32))read-onlycurrent
slcServSNMPReadOnlyCommunity
OBJECT-TYPE
The SNMP read-only community for SNMP versions 1 and 2.
1.3.6.1.4.1.244.1.1.2.6.7OCTET STRINGread-onlycurrent
slcServSNMPReadWriteCommunity
OBJECT-TYPE
The SNMP read-write community for SNMP versions 1 and 2.
1.3.6.1.4.1.244.1.1.2.6.8OCTET STRINGread-onlycurrent
slcServSNMPTrapCommunity
OBJECT-TYPE
The SNMP trap community for SNMP versions 1 and 2.
1.3.6.1.4.1.244.1.1.2.6.9OCTET STRINGread-onlycurrent
slcServSNMPAlarmDelay
OBJECT-TYPE
The delay, in seconds, between traps that are sent out for alarm conditions.
1.3.6.1.4.1.244.1.1.2.6.10Integer32read-onlycurrent
slcServSNMPv3ReadWriteUser
OBJECT-TYPE
The user name for read-write access to the SLC via SNMP v3.
1.3.6.1.4.1.244.1.1.2.6.11OCTET STRING (SIZE(1..32))read-onlycurrent
slcServSNMPv3Security
OBJECT-TYPE
The security model used for SNMP v3: insecure authentication and no packet encryption, secure authentication and no packet encryption, secure authentication and packet encryption.
1.3.6.1.4.1.244.1.1.2.6.12INTEGER {noAuthNoEncrypt(1), authNoEncrypt(2), authEncrypt(3)}read-onlycurrent
slcServSNMPv3Authentication
OBJECT-TYPE
When slcServSNMPv3Security is set to authNoEncrypt or authEncrypt, the type of authentication used.
1.3.6.1.4.1.244.1.1.2.6.13INTEGER {md5(1), sha(2)}read-onlycurrent
slcServSNMPv3Encryption
OBJECT-TYPE
When slcServSNMPv3Security is set to authEncrypt, the type of encryption used.
1.3.6.1.4.1.244.1.1.2.6.14INTEGER {des(1), aes(2)}read-onlycurrent
slcServSNMPv1v2
OBJECT-TYPE
If enabled, SNMP version 1 and version 2 (which use the Read-Only and Read-Write Communities) is enabled.
1.3.6.1.4.1.244.1.1.2.6.15EnabledStateread-onlycurrent
slcServSNMPNMS2
OBJECT-TYPE
The IPv4 Address of the 2nd Network Management System (NMS).
1.3.6.1.4.1.244.1.1.2.6.16IpAddressread-onlycurrent
slcServSNMPNMSIPv6
OBJECT-TYPE
The IPv6 Address of the Network Management System (NMS).
1.3.6.1.4.1.244.1.1.2.6.17Ipv6Addressread-onlycurrent
slcServSNMPNMS2IPv6
OBJECT-TYPE
The IPv6 Address of the 2nd Network Management System (NMS).
1.3.6.1.4.1.244.1.1.2.6.18Ipv6Addressread-onlycurrent
slcServSMTP
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.7
slcServSMTPServer
OBJECT-TYPE
The IP Address of the SMTP (email) server.
1.3.6.1.4.1.244.1.1.2.7.1IpAddressread-onlycurrent
slcServSMTPSender
OBJECT-TYPE
The sender's email address for emails sent from the SLC.
1.3.6.1.4.1.244.1.1.2.7.2OCTET STRINGread-onlycurrent
slcServNFS
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.8
slcServNFSMountTable
OBJECT-TYPE
Table of NFS Mounts.
1.3.6.1.4.1.244.1.1.2.8.1not-accessiblecurrent
slcServNFSMountEntry
OBJECT-TYPE
An entry containing a NFS Mount and it's attributes.
1.3.6.1.4.1.244.1.1.2.8.1.1not-accessiblecurrent
slcServNFSMountIndex
OBJECT-TYPE
Reference index for each NFS Mount.
1.3.6.1.4.1.244.1.1.2.8.1.1.1Integer32 (1..3)read-onlycurrent
slcServNFSMountRemoteDir
OBJECT-TYPE
The remote directory of the NFS Mount, in the format <remote server>:/<remote directory>.
1.3.6.1.4.1.244.1.1.2.8.1.1.2OCTET STRINGread-onlycurrent
slcServNFSMountLocalDir
OBJECT-TYPE
The directory in the SLC on which the remote directory is mounted.
1.3.6.1.4.1.244.1.1.2.8.1.1.3OCTET STRINGread-onlycurrent
slcServNFSMountReadWrite
OBJECT-TYPE
If enabled, the remote NFS directory is mounted read-write. If disabled, the remote NFS directory is mounted read-only.
1.3.6.1.4.1.244.1.1.2.8.1.1.4EnabledStateread-onlycurrent
slcServNFSMountMount
OBJECT-TYPE
If enabled, the remote NFS directory is configured to be mounted. If disabled, the remote NFS directory will not be mounted, or will be unmounted if is is mounted.
1.3.6.1.4.1.244.1.1.2.8.1.1.5EnabledStateread-onlycurrent
slcServCIFS
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.9
slcServCIFSState
OBJECT-TYPE
If enabled, the SLC exports a CIFS share containing system logs, Device Port logs, and saved SLC configurations.
1.3.6.1.4.1.244.1.1.2.9.1EnabledStateread-onlycurrent
slcServCIFSEth1
OBJECT-TYPE
If enabled, the CIFS share is exported on the Eth1 interface.
1.3.6.1.4.1.244.1.1.2.9.2EnabledStateread-onlycurrent
slcServCIFSEth2
OBJECT-TYPE
If enabled, the CIFS share is exported on the Eth2 interface.
1.3.6.1.4.1.244.1.1.2.9.3EnabledStateread-onlycurrent
slcServCIFSWorkgroup
OBJECT-TYPE
The SMB/CIFS workgroup that the CIFS share is associated with.
1.3.6.1.4.1.244.1.1.2.9.4OCTET STRING (SIZE(0..15))read-onlycurrent
slcServSLCNetwork
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.10
slcServSLCNetSearch
OBJECT-TYPE
Indicates how to search for SLCs on the network: by searching a list of manually entered IP Addresses, by broadcasting on the local subnet, or both.
1.3.6.1.4.1.244.1.1.2.10.1INTEGER {both(1), subnet(2), manual(3)}read-onlycurrent
slcServSLCNetNumber
OBJECT-TYPE
The number of entries in the SLC Network Manual IP Address table.
1.3.6.1.4.1.244.1.1.2.10.2Integer32 (0..200)read-onlycurrent
slcServSLCNetTable
OBJECT-TYPE
Table of manually entered IP Address entries. The number of entries is given by the value of slcServSLCNetNumber.
1.3.6.1.4.1.244.1.1.2.10.3not-accessiblecurrent
slcServSLCNetEntry
OBJECT-TYPE
An entry containing an IP Address for searching the SLC Network.
1.3.6.1.4.1.244.1.1.2.10.3.1not-accessiblecurrent
slcServSLCNetIndex
OBJECT-TYPE
Reference index for each manual IP Address.
1.3.6.1.4.1.244.1.1.2.10.3.1.1Integer32 (1..200)read-onlycurrent
slcServSLCNetIP
OBJECT-TYPE
The IP Address to search for in the SLC Network.
1.3.6.1.4.1.244.1.1.2.10.3.1.2IpAddressread-onlycurrent
slcServPhoneHome
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.11
slcServPhoneHomeState
OBJECT-TYPE
Enables the Phone Home feature.
1.3.6.1.4.1.244.1.1.2.11.1EnabledStateread-onlycurrent
slcServPhoneHomeIP
OBJECT-TYPE
The IP Address used for Phone Home communication.
1.3.6.1.4.1.244.1.1.2.11.2IpAddressread-onlycurrent
slcServHostList
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.12
slcServHostListNumber
OBJECT-TYPE
The number of entries in the Host List table.
1.3.6.1.4.1.244.1.1.2.12.1Integer32 (0..50)read-onlycurrent
slcServHostListTable
OBJECT-TYPE
Table of Host Lists. The number of entries is given by the value of slcServHostListNumber.
1.3.6.1.4.1.244.1.1.2.12.2not-accessiblecurrent
slcServHostListEntry
OBJECT-TYPE
An entry containing a Host List, used for Dial-in connections on a Device Port or PC Card modem.
1.3.6.1.4.1.244.1.1.2.12.2.1not-accessiblecurrent
slcServHostListIndex
OBJECT-TYPE
Reference index for each Host List.
1.3.6.1.4.1.244.1.1.2.12.2.1.1Integer32 (1..50)read-onlycurrent
slcServHostListName
OBJECT-TYPE
The unique name assigned to the Host List.
1.3.6.1.4.1.244.1.1.2.12.2.1.2OCTET STRINGread-onlycurrent
slcServHostListRetryCount
OBJECT-TYPE
The number of times to retry connections to an individual host within the Host List.
1.3.6.1.4.1.244.1.1.2.12.2.1.3Integer32read-onlycurrent
slcServHostListAuth
OBJECT-TYPE
If enabled, authentication is enabled for the hosts in the Host List.
1.3.6.1.4.1.244.1.1.2.12.2.1.4EnabledStateread-onlycurrent
slcServHostListNumHosts
OBJECT-TYPE
The number of individual hosts in the Host List.
1.3.6.1.4.1.244.1.1.2.12.2.1.5Integer32 (0..10)read-onlycurrent
slcServHostListHosts
OBJECT-TYPE
A string containing all hosts in the Host List; the entry for each host is separated by a ';'. Each host entry is formatted as follows: '<Host>,<Protocol>,<TCP Port>,<Escape Sequence>;'.
1.3.6.1.4.1.244.1.1.2.12.2.1.6OCTET STRINGread-onlycurrent
slcServWebTerm
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.13
slcServWebTermDeployment
OBJECT-TYPE
The method used to launch the Java Terminal for Web SSH and Web Telnet. This object is deprecated.
1.3.6.1.4.1.244.1.1.2.13.1INTEGER {javaWebStart(1), applet(2)}read-onlycurrent
slcServWebTermBufSize
OBJECT-TYPE
The number of lines in the Java Terminal buffer.
1.3.6.1.4.1.244.1.1.2.13.2Integer32 (24..5000)read-onlycurrent
slcServSite
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.2.14
slcServSiteNumber
OBJECT-TYPE
The number of entries in the Sites table.
1.3.6.1.4.1.244.1.1.2.14.1Integer32 (0..20)read-onlycurrent
slcServSiteTable
OBJECT-TYPE
Table of Sites. The number of entries is given by the value of slcServSiteNumber.
1.3.6.1.4.1.244.1.1.2.14.2not-accessiblecurrent
slcServSiteEntry
OBJECT-TYPE
An entry containing a Site, used for connections on a Device Port or PC Card/USB modem.
1.3.6.1.4.1.244.1.1.2.14.2.1not-accessiblecurrent
slcServSiteIndex
OBJECT-TYPE
Reference index for each Site.
1.3.6.1.4.1.244.1.1.2.14.2.1.1Integer32 (1..50)read-onlycurrent
slcServSiteName
OBJECT-TYPE
The unique name assigned to the Site.
1.3.6.1.4.1.244.1.1.2.14.2.1.2OCTET STRINGread-onlycurrent
slcServSitePort
OBJECT-TYPE
The port the Site is assigned to. If the port is devicePort or usbPort, slcServSitePortId defines which Device Port or USB Port (with an attached modem) the port is assigned to.
1.3.6.1.4.1.244.1.1.2.14.2.1.3INTEGER {none(1), devicePort(2), upperPCCard(3), lowerPCCard(4), usbPort(5), internalModem(6)}read-onlycurrent
slcServSitePortId
OBJECT-TYPE
The identifier for a Device Port if slcServSitePort equals devicePort(1), or the identifier for a USB Port if slcServSitePort equals usbPort(5). Otherwise equals zero.
1.3.6.1.4.1.244.1.1.2.14.2.1.4Integer32 (0..48)read-onlycurrent
slcServSiteLoginHost
OBJECT-TYPE
For PPP or text authentication on dialin, the user login or CHAP host to use for authentication. If authentication is successful, the rest of the site parameters will be used for the connection.
1.3.6.1.4.1.244.1.1.2.14.2.1.5OCTET STRINGread-onlycurrent
slcServSiteCHAPSecret
OBJECT-TYPE
For PPP authentication on dialin, the CHAP secret to use for authentication.
1.3.6.1.4.1.244.1.1.2.14.2.1.6OCTET STRINGread-onlycurrent
slcServSiteTimeout
OBJECT-TYPE
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.2.14.2.1.7Integer32 (0..30)read-onlycurrent
slcServSiteLocalIP
OBJECT-TYPE
For PPP connections, the local IP Address - all zeros if it should be negotiated.
1.3.6.1.4.1.244.1.1.2.14.2.1.8IpAddressread-onlycurrent
slcServSiteRemoteIP
OBJECT-TYPE
For PPP connections, the remote IP Address - all zeros if it should be negotiated.
1.3.6.1.4.1.244.1.1.2.14.2.1.9IpAddressread-onlycurrent
slcServSiteStaticRouteIP
OBJECT-TYPE
For Dial-on-Demand PPP connections, the static route IP Address for the remote network.
1.3.6.1.4.1.244.1.1.2.14.2.1.10IpAddressread-onlycurrent
slcServSiteStaticRouteMask
OBJECT-TYPE
For Dial-on-Demand PPP connections, the static route subnet mask for the remote network.
1.3.6.1.4.1.244.1.1.2.14.2.1.11IpAddressread-onlycurrent
slcServSiteStaticRouteGateway
OBJECT-TYPE
For Dial-on-Demand PPP connections, the static route gateway for the remote network.
1.3.6.1.4.1.244.1.1.2.14.2.1.12IpAddressread-onlycurrent
slcServSiteDialoutNum
OBJECT-TYPE
The phone number to use for dial-out connections.
1.3.6.1.4.1.244.1.1.2.14.2.1.13OCTET STRINGread-onlycurrent
slcServSiteDialoutLogin
OBJECT-TYPE
For dial-out connections, the login to use for authenticating to the remote peer; or on dial-in, the login to use if the remote peer requests authentication (for example, a two way CHAP handshake).
1.3.6.1.4.1.244.1.1.2.14.2.1.14OCTET STRING (SIZE(1..32))read-onlycurrent
slcServSiteDialback
OBJECT-TYPE
If enabled, the site has permission to use modem dialback.
1.3.6.1.4.1.244.1.1.2.14.2.1.15EnabledStateread-onlycurrent
slcServSiteDialbackNum
OBJECT-TYPE
The phone number to use for dial-back connections.
1.3.6.1.4.1.244.1.1.2.14.2.1.16OCTET STRINGread-onlycurrent
slcServSiteDialbackDelay
OBJECT-TYPE
For Dial-back, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
1.3.6.1.4.1.244.1.1.2.14.2.1.17Integer32read-onlycurrent
slcServSiteIdleTimeout
OBJECT-TYPE
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.2.14.2.1.18Integer32read-onlycurrent
slcServSiteRestartDelay
OBJECT-TYPE
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
1.3.6.1.4.1.244.1.1.2.14.2.1.19Integer32read-onlycurrent
slcServSiteCBCPServerAllowNoCallback
OBJECT-TYPE
If enabled, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
1.3.6.1.4.1.244.1.1.2.14.2.1.20EnabledStateread-onlycurrent
slcServSiteNATState
OBJECT-TYPE
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
1.3.6.1.4.1.244.1.1.2.14.2.1.21EnabledStateread-onlycurrent
slcServSiteDialbackRetries
OBJECT-TYPE
For Dial-back, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
1.3.6.1.4.1.244.1.1.2.14.2.1.22Integer32read-onlycurrent
slcAuth
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3
slcAuthLocal
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3.1
slcAuthLocalNumber
OBJECT-TYPE
The number of entries in the Local Users table.
1.3.6.1.4.1.244.1.1.3.1.1Integer32 (1..128)read-onlycurrent
slcAuthLocalUsersTable
OBJECT-TYPE
Table of Local Users entries. The number of entries is given by the value of slcAuthLocalNumber.
1.3.6.1.4.1.244.1.1.3.1.2not-accessiblecurrent
slcAuthLocalUserEntry
OBJECT-TYPE
An entry containing a Local Users and it's attributes.
1.3.6.1.4.1.244.1.1.3.1.2.1not-accessiblecurrent
slcAuthLocalUserIndex
OBJECT-TYPE
Reference index for each Local User.
1.3.6.1.4.1.244.1.1.3.1.2.1.1Integer32 (1..128)read-onlycurrent
slcAuthLocalUserLogin
OBJECT-TYPE
The login for the Local User. If the user account is locked (cannot login), the login is appended with a '*' character.
1.3.6.1.4.1.244.1.1.3.1.2.1.2OCTET STRING (SIZE(0..33))read-onlycurrent
slcAuthLocalUserUID
OBJECT-TYPE
The unique user identifier number for the Local User.
1.3.6.1.4.1.244.1.1.3.1.2.1.3Unsigned32read-onlycurrent
slcAuthLocalUserListenPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Local User has permission to access via 'connect listen'.
1.3.6.1.4.1.244.1.1.3.1.2.1.4OCTET STRINGread-onlycurrent
slcAuthLocalUserDataPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Local User has permission to access via 'connect direct'.
1.3.6.1.4.1.244.1.1.3.1.2.1.5OCTET STRINGread-onlycurrent
slcAuthLocalUserClearPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Local User has permission to clear.
1.3.6.1.4.1.244.1.1.3.1.2.1.6OCTET STRINGread-onlycurrent
slcAuthLocalUserEscapeSeq
OBJECT-TYPE
The character sequence which the Local User uses to terminate connections to Device Ports.
1.3.6.1.4.1.244.1.1.3.1.2.1.7OCTET STRINGread-onlycurrent
slcAuthLocalUserBreakSeq
OBJECT-TYPE
The character sequence which the Local User uses to send a break sequence.
1.3.6.1.4.1.244.1.1.3.1.2.1.8OCTET STRINGread-onlycurrent
slcAuthLocalUserMenu
OBJECT-TYPE
The custom user menu defined for the Local User. If this is empty, there is no menu defined for the Local User. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login.
1.3.6.1.4.1.244.1.1.3.1.2.1.9OCTET STRINGread-onlycurrent
slcAuthLocalUserDialback
OBJECT-TYPE
If enabled, the Local User has permission to use modem dialback.
1.3.6.1.4.1.244.1.1.3.1.2.1.10EnabledStateread-onlycurrent
slcAuthLocalUserDialbackNum
OBJECT-TYPE
The dialback number defined for the Local User.
1.3.6.1.4.1.244.1.1.3.1.2.1.11OCTET STRINGread-onlycurrent
slcAuthLocalUserGroup
OBJECT-TYPE
The group assigned to the Local User.
1.3.6.1.4.1.244.1.1.3.1.2.1.12UserGroupread-onlycurrent
slcAuthLocalUserRights
OBJECT-TYPE
The rights assigned to the Local User.
1.3.6.1.4.1.244.1.1.3.1.2.1.13UserRightsread-onlycurrent
slcAuthLocalUserPwdExpires
OBJECT-TYPE
If enabled, the local user's password will expire.
1.3.6.1.4.1.244.1.1.3.1.2.1.14EnabledStateread-onlycurrent
slcAuthLocalUserChangePwd
OBJECT-TYPE
If enabled, the local user can change their password.
1.3.6.1.4.1.244.1.1.3.1.2.1.15EnabledStateread-onlycurrent
slcAuthLocalUserChangePwdNextLogin
OBJECT-TYPE
If enabled, the local user must change their password at their next login.
1.3.6.1.4.1.244.1.1.3.1.2.1.16EnabledStateread-onlycurrent
slcAuthLocalState
OBJECT-TYPE
If enabled, Local Users are used for authentication.
1.3.6.1.4.1.244.1.1.3.1.3EnabledStateread-onlycurrent
slcAuthLocalOrder
OBJECT-TYPE
The authentication order of Local Users in authentication methods.
1.3.6.1.4.1.244.1.1.3.1.4AuthOrderread-onlycurrent
slcAuthLocalComplexPasswords
OBJECT-TYPE
If enabled, Local Users are required to use complex passwords that are at least 8 characters long and contain at least one uppercase character, one lowercase character, one digit, and one non-alphanumeric character.
1.3.6.1.4.1.244.1.1.3.1.5EnabledStateread-onlycurrent
slcAuthLocalUseNextMethod
OBJECT-TYPE
This object applies to all authentication methods, not just Local Users. If enabled, authentication will occur using all methods, in the order of their precedence, until a successful authentication occurs. If disabled, only the first authentication method that responds will be used.
1.3.6.1.4.1.244.1.1.3.1.6EnabledStateread-onlycurrent
slcAuthLocalAllowReuse
OBJECT-TYPE
If enabled, local users can reuse old passwords.
1.3.6.1.4.1.244.1.1.3.1.7EnabledStateread-onlycurrent
slcAuthLocalReuseHistory
OBJECT-TYPE
The number of passwords a local user must use before reusing an old password.
1.3.6.1.4.1.244.1.1.3.1.8Integer32 (0..8)read-onlycurrent
slcAuthLocalPasswordLifetime
OBJECT-TYPE
The number of days until a password expires.
1.3.6.1.4.1.244.1.1.3.1.9Integer32 (1..365)read-onlycurrent
slcAuthLocalWarningPeriod
OBJECT-TYPE
The number of days before a password expires that a local user is warned about the expiring password. A value of 0 indicates that this feature is disabled.
1.3.6.1.4.1.244.1.1.3.1.10Integer32 (0..90)read-onlycurrent
slcAuthLocalMaxLoginAttempts
OBJECT-TYPE
The number of times a local user can attempt to log in unsuccessfully before the SLC locks the user out. A value of 0 indicates that this feature is disabled.
1.3.6.1.4.1.244.1.1.3.1.11Integer32 (0..8)read-onlycurrent
slcAuthLocalLockoutPeriod
OBJECT-TYPE
The number of minutes the locked-out user must wait before trying to log in to to the SLC again. A value of 0 indicates that this feature is disabled.
1.3.6.1.4.1.244.1.1.3.1.12Integer32 (0..90)read-onlycurrent
slcAuthLocalMultipleSysadminLogins
OBJECT-TYPE
If enabled, multiple sysadmin logins to the web are allowed.
1.3.6.1.4.1.244.1.1.3.1.13EnabledStateread-onlycurrent
slcAuthLocalSysadminConsoleOnly
OBJECT-TYPE
If enabled, the sysadmin can only access the SLC via the Console Port.
1.3.6.1.4.1.244.1.1.3.1.14EnabledStateread-onlycurrent
slcAuthNIS
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3.2
slcAuthNISState
OBJECT-TYPE
If enabled, NIS is used for authentication.
1.3.6.1.4.1.244.1.1.3.2.1EnabledStateread-onlycurrent
slcAuthNISOrder
OBJECT-TYPE
The authentication order of NIS in remote authentication methods.
1.3.6.1.4.1.244.1.1.3.2.2AuthOrderread-onlycurrent
slcAuthNISDomain
OBJECT-TYPE
The NIS domain.
1.3.6.1.4.1.244.1.1.3.2.3OCTET STRING (SIZE(0..80))read-onlycurrent
slcAuthNISBroadcast
OBJECT-TYPE
If enabled, the SLC broadcasts for the NIS server.
1.3.6.1.4.1.244.1.1.3.2.4EnabledStateread-onlycurrent
slcAuthNISMaster
OBJECT-TYPE
The IP Address of the NIS master server.
1.3.6.1.4.1.244.1.1.3.2.5IpAddressread-onlycurrent
slcAuthNISSlave1
OBJECT-TYPE
The IP Address of the NIS slave server #1.
1.3.6.1.4.1.244.1.1.3.2.6IpAddressread-onlycurrent
slcAuthNISSlave2
OBJECT-TYPE
The IP Address of the NIS slave server #2.
1.3.6.1.4.1.244.1.1.3.2.7IpAddressread-onlycurrent
slcAuthNISSlave3
OBJECT-TYPE
The IP Address of the NIS slave server #3.
1.3.6.1.4.1.244.1.1.3.2.8IpAddressread-onlycurrent
slcAuthNISGroup
OBJECT-TYPE
The group assigned to NIS users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.2.9UserGroupread-onlycurrent
slcAuthNISRights
OBJECT-TYPE
The rights assigned to NIS users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.2.10UserRightsread-onlycurrent
slcAuthNISMenu
OBJECT-TYPE
The custom user menu defined for all NIS users who login to the SLC. If this is empty, there is no menu defined for NIS Users.
1.3.6.1.4.1.244.1.1.3.2.11OCTET STRINGread-onlycurrent
slcAuthNISListenPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to access via 'connect listen'.
1.3.6.1.4.1.244.1.1.3.2.12OCTET STRINGread-onlycurrent
slcAuthNISDataPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to access via 'connect direct'.
1.3.6.1.4.1.244.1.1.3.2.13OCTET STRINGread-onlycurrent
slcAuthNISClearPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via NIS have permission to clear.
1.3.6.1.4.1.244.1.1.3.2.14OCTET STRINGread-onlycurrent
slcAuthNISSlave4
OBJECT-TYPE
The IP Address of the NIS slave server #4.
1.3.6.1.4.1.244.1.1.3.2.15IpAddressread-onlycurrent
slcAuthNISSlave5
OBJECT-TYPE
The IP Address of the NIS slave server #5.
1.3.6.1.4.1.244.1.1.3.2.16IpAddressread-onlycurrent
slcAuthNISEscapeSeq
OBJECT-TYPE
The character sequence which the NIS user uses to terminate connections to Device Ports.
1.3.6.1.4.1.244.1.1.3.2.17OCTET STRINGread-onlycurrent
slcAuthNISBreakSeq
OBJECT-TYPE
The character sequence which the NIS user uses to send a break sequence.
1.3.6.1.4.1.244.1.1.3.2.18OCTET STRINGread-onlycurrent
slcAuthNISDialback
OBJECT-TYPE
If enabled, NIS users have permission to use modem dialback.
1.3.6.1.4.1.244.1.1.3.2.19EnabledStateread-onlycurrent
slcAuthNISDialbackNum
OBJECT-TYPE
The dialback number defined for NIS users.
1.3.6.1.4.1.244.1.1.3.2.20OCTET STRINGread-onlycurrent
slcAuthLDAP
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3.3
slcAuthLDAPState
OBJECT-TYPE
If enabled, LDAP is used for authentication.
1.3.6.1.4.1.244.1.1.3.3.1EnabledStateread-onlycurrent
slcAuthLDAPOrder
OBJECT-TYPE
The authentication order of LDAP in remote authentication methods.
1.3.6.1.4.1.244.1.1.3.3.2AuthOrderread-onlycurrent
slcAuthLDAPServer
OBJECT-TYPE
The IPv4 Address of the LDAP server.
1.3.6.1.4.1.244.1.1.3.3.3IpAddressread-onlycurrent
slcAuthLDAPBase
OBJECT-TYPE
The LDAP Base.
1.3.6.1.4.1.244.1.1.3.3.4OCTET STRING (SIZE(0..80))read-onlycurrent
slcAuthLDAPBindName
OBJECT-TYPE
The LDAP Bind Name.
1.3.6.1.4.1.244.1.1.3.3.5OCTET STRING (SIZE(0..80))read-onlycurrent
slcAuthLDAPPort
OBJECT-TYPE
The LDAP TCP Port Number.
1.3.6.1.4.1.244.1.1.3.3.6Integer32 (0..65535)read-onlycurrent
slcAuthLDAPADSupport
OBJECT-TYPE
If enabled, Active Directory support is enabled for LDAP.
1.3.6.1.4.1.244.1.1.3.3.7EnabledStateread-onlycurrent
slcAuthLDAPGroup
OBJECT-TYPE
The group assigned to LDAP users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.3.8UserGroupread-onlycurrent
slcAuthLDAPRights
OBJECT-TYPE
The rights assigned to LDAP users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.3.9UserRightsread-onlycurrent
slcAuthLDAPMenu
OBJECT-TYPE
The custom user menu defined for all LDAP users who login to the SLC. If this is empty, there is no menu defined for LDAP Users.
1.3.6.1.4.1.244.1.1.3.3.10OCTET STRINGread-onlycurrent
slcAuthLDAPListenPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to access via 'connect listen'.
1.3.6.1.4.1.244.1.1.3.3.11OCTET STRINGread-onlycurrent
slcAuthLDAPDataPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to access via 'connect direct'.
1.3.6.1.4.1.244.1.1.3.3.12OCTET STRINGread-onlycurrent
slcAuthLDAPClearPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via LDAP have permission to clear.
1.3.6.1.4.1.244.1.1.3.3.13OCTET STRINGread-onlycurrent
slcAuthLDAPEncrypt
OBJECT-TYPE
If enabled, encrypt messages between the SLC and the LDAP server.
1.3.6.1.4.1.244.1.1.3.3.14EnabledStateread-onlycurrent
slcAuthLDAPEscapeSeq
OBJECT-TYPE
The character sequence which the LDAP user uses to terminate connections to Device Ports.
1.3.6.1.4.1.244.1.1.3.3.15OCTET STRINGread-onlycurrent
slcAuthLDAPBreakSeq
OBJECT-TYPE
The character sequence which the LDAP user uses to send a break sequence.
1.3.6.1.4.1.244.1.1.3.3.16OCTET STRINGread-onlycurrent
slcAuthLDAPBindWithLogin
OBJECT-TYPE
If enabled, bind to the LDAP server using the current login and password. The $login token in slcAuthLDAPBindName will be replaced with the current login.
1.3.6.1.4.1.244.1.1.3.3.17EnabledStateread-onlycurrent
slcAuthLDAPUseLDAPSchema
OBJECT-TYPE
If enabled, attributes and permissions for remote users are retrieved from an LDAP server.
1.3.6.1.4.1.244.1.1.3.3.18EnabledStateread-onlycurrent
slcAuthLDAPDialback
OBJECT-TYPE
If enabled, LDAP users have permission to use modem dialback.
1.3.6.1.4.1.244.1.1.3.3.19EnabledStateread-onlycurrent
slcAuthLDAPDialbackNum
OBJECT-TYPE
The dialback number defined for LDAP users.
1.3.6.1.4.1.244.1.1.3.3.20OCTET STRINGread-onlycurrent
slcAuthLDAPUserFilter
OBJECT-TYPE
The attribute used by the LDAP server for user logins.
1.3.6.1.4.1.244.1.1.3.3.21OCTET STRINGread-onlycurrent
slcAuthLDAPGroupFilter
OBJECT-TYPE
The objectclass used by the LDAP server for groups.
1.3.6.1.4.1.244.1.1.3.3.22OCTET STRINGread-onlycurrent
slcAuthLDAPGroupMembershipAttr
OBJECT-TYPE
The attribute used by the LDAP server for group membership. This attribute may be use to search for a name (ie, msmith) or a Distinguished Name (ie, uid=msmith,ou=People,dc=lantronix,dc=com).
1.3.6.1.4.1.244.1.1.3.3.23OCTET STRINGread-onlycurrent
slcAuthLDAPGroupMembershipDN
OBJECT-TYPE
If enabled, the string given by slcAuthLDAPGroupMembershipAttr is a Distinguished Name (DN). Otherwise the string is a name.
1.3.6.1.4.1.244.1.1.3.3.24EnabledStateread-onlycurrent
slcAuthLDAPServer2
OBJECT-TYPE
The IPv4 Address of the secondary/backup LDAP server.
1.3.6.1.4.1.244.1.1.3.3.25IpAddressread-onlycurrent
slcAuthLDAPServerIPv6
OBJECT-TYPE
The IPv6 Address of the LDAP server.
1.3.6.1.4.1.244.1.1.3.3.26Ipv6Addressread-onlycurrent
slcAuthLDAPServer2IPv6
OBJECT-TYPE
The IPv6 Address of the secondary/backup LDAP server.
1.3.6.1.4.1.244.1.1.3.3.27Ipv6Addressread-onlycurrent
slcAuthRADIUS
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3.4
slcAuthRADIUSState
OBJECT-TYPE
If enabled, RADIUS is used for authentication.
1.3.6.1.4.1.244.1.1.3.4.1EnabledStateread-onlycurrent
slcAuthRADIUSOrder
OBJECT-TYPE
The authentication order of RADIUS in remote authentication methods.
1.3.6.1.4.1.244.1.1.3.4.2AuthOrderread-onlycurrent
slcAuthRADIUSTimeout
OBJECT-TYPE
The RADIUS Timeout in seconds. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.3.4.3Integer32 (0..30)read-onlycurrent
slcAuthRADIUSServerTable
OBJECT-TYPE
Table of RADIUS servers.
1.3.6.1.4.1.244.1.1.3.4.4not-accessiblecurrent
slcAuthRADIUSServerEntry
OBJECT-TYPE
An entry containing a RADIUS server and it's parameters.
1.3.6.1.4.1.244.1.1.3.4.4.1not-accessiblecurrent
slcAuthRADIUSServerIndex
OBJECT-TYPE
Reference index for each RADIUS server.
1.3.6.1.4.1.244.1.1.3.4.4.1.1Integer32 (1..2)read-onlycurrent
slcAuthRADIUSServer
OBJECT-TYPE
The IPv4 Address of the RADIUS server.
1.3.6.1.4.1.244.1.1.3.4.4.1.2IpAddressread-onlycurrent
slcAuthRADIUSPort
OBJECT-TYPE
The RADIUS Server TCP Port Number.
1.3.6.1.4.1.244.1.1.3.4.4.1.3Integer32 (0..65535)read-onlycurrent
slcAuthRADIUSServerIPv6
OBJECT-TYPE
The IPv6 Address of the RADIUS server.
1.3.6.1.4.1.244.1.1.3.4.4.1.4Ipv6Addressread-onlycurrent
slcAuthRADIUSGroup
OBJECT-TYPE
The group assigned to RADIUS users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.4.5UserGroupread-onlycurrent
slcAuthRADIUSRights
OBJECT-TYPE
The rights assigned to RADIUS users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.4.6UserRightsread-onlycurrent
slcAuthRADIUSMenu
OBJECT-TYPE
The custom user menu defined for all RADIUS users who login to the SLC. If this is empty, there is no menu defined for RADIUS Users.
1.3.6.1.4.1.244.1.1.3.4.7OCTET STRINGread-onlycurrent
slcAuthRADIUSListenPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to access via 'connect listen'.
1.3.6.1.4.1.244.1.1.3.4.8OCTET STRINGread-onlycurrent
slcAuthRADIUSDataPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to access via 'connect direct'.
1.3.6.1.4.1.244.1.1.3.4.9OCTET STRINGread-onlycurrent
slcAuthRADIUSClearPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via RADIUS have permission to clear.
1.3.6.1.4.1.244.1.1.3.4.10OCTET STRINGread-onlycurrent
slcAuthRADIUSEscapeSeq
OBJECT-TYPE
The character sequence which the RADIUS user uses to terminate connections to Device Ports.
1.3.6.1.4.1.244.1.1.3.4.11OCTET STRINGread-onlycurrent
slcAuthRADIUSBreakSeq
OBJECT-TYPE
The character sequence which the RADIUS user uses to send a break sequence.
1.3.6.1.4.1.244.1.1.3.4.12OCTET STRINGread-onlycurrent
slcAuthRADIUSDialback
OBJECT-TYPE
If enabled, RADIUS users have permission to use modem dialback.
1.3.6.1.4.1.244.1.1.3.4.13EnabledStateread-onlycurrent
slcAuthRADIUSDialbackNum
OBJECT-TYPE
The dialback number defined for RADIUS users.
1.3.6.1.4.1.244.1.1.3.4.14OCTET STRINGread-onlycurrent
slcAuthRADIUSUseVSA
OBJECT-TYPE
If enabled, the SLC will obtain remote user attributes (group/permissions and port access) from the RADIUS server via the Vendor-Specific Attribute (VSA).
1.3.6.1.4.1.244.1.1.3.4.15EnabledStateread-onlycurrent
slcAuthKerberos
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3.5
slcAuthKerbState
OBJECT-TYPE
If enabled, Kerberos is used for authentication.
1.3.6.1.4.1.244.1.1.3.5.1EnabledStateread-onlycurrent
slcAuthKerbOrder
OBJECT-TYPE
The authentication order of Kerberos in remote authentication methods.
1.3.6.1.4.1.244.1.1.3.5.2AuthOrderread-onlycurrent
slcAuthKerbRealm
OBJECT-TYPE
The Kerberos Realm.
1.3.6.1.4.1.244.1.1.3.5.3OCTET STRING (SIZE(0..256))read-onlycurrent
slcAuthKerbKDC
OBJECT-TYPE
The Kerberos KDC.
1.3.6.1.4.1.244.1.1.3.5.4OCTET STRING (SIZE(0..256))read-onlycurrent
slcAuthKerbKDCIP
OBJECT-TYPE
The IPv4 Address of the Kerberos Key Distribution Server.
1.3.6.1.4.1.244.1.1.3.5.5IpAddressread-onlycurrent
slcAuthKerbKDCPort
OBJECT-TYPE
The Kerberos KDC Port Number.
1.3.6.1.4.1.244.1.1.3.5.6Integer32 (0..65535)read-onlycurrent
slcAuthKerbUseLDAP
OBJECT-TYPE
If enabled, LDAP is used for lookups.
1.3.6.1.4.1.244.1.1.3.5.7EnabledStateread-onlycurrent
slcAuthKerbGroup
OBJECT-TYPE
The group assigned to Kerberos users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.5.8UserGroupread-onlycurrent
slcAuthKerbRights
OBJECT-TYPE
The rights assigned to Kerberos users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.5.9UserRightsread-onlycurrent
slcAuthKerbMenu
OBJECT-TYPE
The custom user menu defined for all Kerberos users who login to the SLC. If this is empty, there is no menu defined for Kerberos Users.
1.3.6.1.4.1.244.1.1.3.5.10OCTET STRINGread-onlycurrent
slcAuthKerbListenPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to access via 'connect listen'.
1.3.6.1.4.1.244.1.1.3.5.11OCTET STRINGread-onlycurrent
slcAuthKerbDataPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to access via 'connect direct'.
1.3.6.1.4.1.244.1.1.3.5.12OCTET STRINGread-onlycurrent
slcAuthKerbClearPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via Kerberos have permission to clear.
1.3.6.1.4.1.244.1.1.3.5.13OCTET STRINGread-onlycurrent
slcAuthKerbEscapeSeq
OBJECT-TYPE
The character sequence which the Kerberos user uses to terminate connections to Device Ports.
1.3.6.1.4.1.244.1.1.3.5.14OCTET STRINGread-onlycurrent
slcAuthKerbBreakSeq
OBJECT-TYPE
The character sequence which the Kerberos user uses to send a break sequence.
1.3.6.1.4.1.244.1.1.3.5.15OCTET STRINGread-onlycurrent
slcAuthKerbDialback
OBJECT-TYPE
If enabled, Kerberos users have permission to use modem dialback.
1.3.6.1.4.1.244.1.1.3.5.16EnabledStateread-onlycurrent
slcAuthKerbDialbackNum
OBJECT-TYPE
The dialback number defined for Kerberos users.
1.3.6.1.4.1.244.1.1.3.5.17OCTET STRINGread-onlycurrent
slcAuthKerbKDCIPv6
OBJECT-TYPE
The IPv6 Address of the Kerberos Key Distribution Server.
1.3.6.1.4.1.244.1.1.3.5.18Ipv6Addressread-onlycurrent
slcAuthTACACS
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3.6
slcAuthTACACSState
OBJECT-TYPE
If enabled, TACACS is used for authentication.
1.3.6.1.4.1.244.1.1.3.6.1EnabledStateread-onlycurrent
slcAuthTACACSOrder
OBJECT-TYPE
The authentication order of TACACS in remote authentication methods.
1.3.6.1.4.1.244.1.1.3.6.2AuthOrderread-onlycurrent
slcAuthTACACSServer
OBJECT-TYPE
The IPv4 Address of the first TACACS server.
1.3.6.1.4.1.244.1.1.3.6.3IpAddressread-onlycurrent
slcAuthTACACSEncrypt
OBJECT-TYPE
If enabled, encrypt messages between the SLC and the TACACS server.
1.3.6.1.4.1.244.1.1.3.6.4EnabledStateread-onlycurrent
slcAuthTACACSGroup
OBJECT-TYPE
The group assigned to TACACS users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.6.5UserGroupread-onlycurrent
slcAuthTACACSRights
OBJECT-TYPE
The rights assigned to TACACS users who login to the SLC and do not have group/rights defined in the Remote User database.
1.3.6.1.4.1.244.1.1.3.6.6UserRightsread-onlycurrent
slcAuthTACACSMenu
OBJECT-TYPE
The custom user menu defined for all TACACS users who login to the SLC. If this is empty, there is no menu defined for TACACS Users.
1.3.6.1.4.1.244.1.1.3.6.7OCTET STRINGread-onlycurrent
slcAuthTACACSListenPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to access via 'connect listen'.
1.3.6.1.4.1.244.1.1.3.6.8OCTET STRINGread-onlycurrent
slcAuthTACACSDataPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to access via 'connect direct'.
1.3.6.1.4.1.244.1.1.3.6.9OCTET STRINGread-onlycurrent
slcAuthTACACSClearPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which users authenticated via TACACS have permission to clear.
1.3.6.1.4.1.244.1.1.3.6.10OCTET STRINGread-onlycurrent
slcAuthTACACSServer2
OBJECT-TYPE
The IPv4 Address of the second TACACS server.
1.3.6.1.4.1.244.1.1.3.6.11IpAddressread-onlycurrent
slcAuthTACACSServer3
OBJECT-TYPE
The IPv4 Address of the third TACACS server.
1.3.6.1.4.1.244.1.1.3.6.12IpAddressread-onlycurrent
slcAuthTACACSEscapeSeq
OBJECT-TYPE
The character sequence which the TACACS user uses to terminate connections to Device Ports.
1.3.6.1.4.1.244.1.1.3.6.13OCTET STRINGread-onlycurrent
slcAuthTACACSBreakSeq
OBJECT-TYPE
The character sequence which the TACACS user uses to send a break sequence.
1.3.6.1.4.1.244.1.1.3.6.14OCTET STRINGread-onlycurrent
slcAuthTACACSDialback
OBJECT-TYPE
If enabled, TACACS users have permission to use modem dialback.
1.3.6.1.4.1.244.1.1.3.6.15EnabledStateread-onlycurrent
slcAuthTACACSDialbackNum
OBJECT-TYPE
The dialback number defined for TACACS users.
1.3.6.1.4.1.244.1.1.3.6.16OCTET STRINGread-onlycurrent
slcAuthTACACSAuthService
OBJECT-TYPE
The type of service used to pass the authentications tokens (e.g., login and password) between the SLC and the TACACS+ server.
1.3.6.1.4.1.244.1.1.3.6.17INTEGER {pppPAP(1), pppCHAP(2), asciiLogin(3)}read-onlycurrent
slcAuthTACACSServerIPv6
OBJECT-TYPE
The IPv6 Address of the first TACACS server.
1.3.6.1.4.1.244.1.1.3.6.18Ipv6Addressread-onlycurrent
slcAuthTACACSServer2IPv6
OBJECT-TYPE
The IPv6 Address of the second TACACS server.
1.3.6.1.4.1.244.1.1.3.6.19Ipv6Addressread-onlycurrent
slcAuthTACACSServer3IPv6
OBJECT-TYPE
The IPv6 Address of the third TACACS server.
1.3.6.1.4.1.244.1.1.3.6.20Ipv6Addressread-onlycurrent
slcAuthRemote
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3.7
slcAuthRemoteNumber
OBJECT-TYPE
The number of entries in the Remote Users table.
1.3.6.1.4.1.244.1.1.3.7.1Integer32 (0..128)read-onlycurrent
slcAuthRemoteUsersTable
OBJECT-TYPE
Table of Remote Users entries. The number of entries is given by the value of slcAuthRemoteNumber.
1.3.6.1.4.1.244.1.1.3.7.2not-accessiblecurrent
slcAuthRemoteUserEntry
OBJECT-TYPE
An entry containing a Remote User and its attributes.
1.3.6.1.4.1.244.1.1.3.7.2.1not-accessiblecurrent
slcAuthRemoteUserIndex
OBJECT-TYPE
Reference index for each Remote User.
1.3.6.1.4.1.244.1.1.3.7.2.1.1Integer32 (1..128)read-onlycurrent
slcAuthRemoteUserLogin
OBJECT-TYPE
The login for the Remote User.
1.3.6.1.4.1.244.1.1.3.7.2.1.2OCTET STRING (SIZE(0..32))read-onlycurrent
slcAuthRemoteUserGroup
OBJECT-TYPE
The group assigned to the Remote User.
1.3.6.1.4.1.244.1.1.3.7.2.1.3UserGroupread-onlycurrent
slcAuthRemoteUserRights
OBJECT-TYPE
The rights assigned to the Remote User.
1.3.6.1.4.1.244.1.1.3.7.2.1.4UserRightsread-onlycurrent
slcAuthRemoteUserListenPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Remote User has permission to access via 'connect listen'.
1.3.6.1.4.1.244.1.1.3.7.2.1.5OCTET STRINGread-onlycurrent
slcAuthRemoteUserDataPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Remote User has permission to access via 'connect direct'.
1.3.6.1.4.1.244.1.1.3.7.2.1.6OCTET STRINGread-onlycurrent
slcAuthRemoteUserClearPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Remote User has permission to clear.
1.3.6.1.4.1.244.1.1.3.7.2.1.7OCTET STRINGread-onlycurrent
slcAuthRemoteUserEscapeSeq
OBJECT-TYPE
The character sequence which the Remote User uses to terminate connections to Device Ports.
1.3.6.1.4.1.244.1.1.3.7.2.1.8OCTET STRINGread-onlycurrent
slcAuthRemoteUserBreakSeq
OBJECT-TYPE
The character sequence which the Remote User uses to send a break sequence.
1.3.6.1.4.1.244.1.1.3.7.2.1.9OCTET STRINGread-onlycurrent
slcAuthRemoteUserMenu
OBJECT-TYPE
The custom user menu defined for the Remote User. If this is empty, there is no menu defined for the Remote User. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login.
1.3.6.1.4.1.244.1.1.3.7.2.1.10OCTET STRINGread-onlycurrent
slcAuthRemoteUserLocked
OBJECT-TYPE
If enabled, the Remote User's account is locked (blocked).
1.3.6.1.4.1.244.1.1.3.7.2.1.11EnabledStateread-onlycurrent
slcAuthRemoteUserDialback
OBJECT-TYPE
If enabled, the Remote User has permission to use modem dialback.
1.3.6.1.4.1.244.1.1.3.7.2.1.12EnabledStateread-onlycurrent
slcAuthRemoteUserDialbackNum
OBJECT-TYPE
The dialback number defined for the Remote User.
1.3.6.1.4.1.244.1.1.3.7.2.1.13OCTET STRINGread-onlycurrent
slcAuthRemoteAuthListOnly
OBJECT-TYPE
If enabled, remote users who log into the SLC will only be authenticated if they are listed in the remote user list.
1.3.6.1.4.1.244.1.1.3.7.3EnabledStateread-onlycurrent
slcAuthGroups
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.3.8
slcAuthGroupsNumber
OBJECT-TYPE
The number of entries in the Groups table.
1.3.6.1.4.1.244.1.1.3.8.1Integer32 (0..20)read-onlycurrent
slcAuthGroupsTable
OBJECT-TYPE
Table of Groups entries. The number of entries is given by the value of slcAuthGroupsNumber.
1.3.6.1.4.1.244.1.1.3.8.2not-accessiblecurrent
slcAuthGroupEntry
OBJECT-TYPE
An entry containing a Remote User and its attributes.
1.3.6.1.4.1.244.1.1.3.8.2.1not-accessiblecurrent
slcAuthGroupIndex
OBJECT-TYPE
Reference index for each Group.
1.3.6.1.4.1.244.1.1.3.8.2.1.1Integer32 (1..128)read-onlycurrent
slcAuthGroupName
OBJECT-TYPE
The name for the Group.
1.3.6.1.4.1.244.1.1.3.8.2.1.2OCTET STRING (SIZE(0..20))read-onlycurrent
slcAuthGroupRights
OBJECT-TYPE
The rights assigned to the Group.
1.3.6.1.4.1.244.1.1.3.8.2.1.3UserRightsread-onlycurrent
slcAuthGroupListenPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Group has permission to access via 'connect listen'.
1.3.6.1.4.1.244.1.1.3.8.2.1.4OCTET STRINGread-onlycurrent
slcAuthGroupDataPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Group has permission to access via 'connect direct'.
1.3.6.1.4.1.244.1.1.3.8.2.1.5OCTET STRINGread-onlycurrent
slcAuthGroupClearPorts
OBJECT-TYPE
The Device Ports and PC Card slots/USB ports which the Group has permission to clear.
1.3.6.1.4.1.244.1.1.3.8.2.1.6OCTET STRINGread-onlycurrent
slcAuthGroupEscapeSeq
OBJECT-TYPE
The character sequence which the Group uses to terminate connections to Device Ports.
1.3.6.1.4.1.244.1.1.3.8.2.1.7OCTET STRINGread-onlycurrent
slcAuthGroupBreakSeq
OBJECT-TYPE
The character sequence which the Group uses to send a break sequence.
1.3.6.1.4.1.244.1.1.3.8.2.1.8OCTET STRINGread-onlycurrent
slcAuthGroupMenu
OBJECT-TYPE
The custom user menu defined for the Group. If this is empty, there is no menu defined for the Group. The menu name is followed by a slash '/' character and either a 'y' if the menu is automatically displayed at login, or a 'n' if it is not automatically displayed at login.
1.3.6.1.4.1.244.1.1.3.8.2.1.9OCTET STRINGread-onlycurrent
slcAuthGroupDialback
OBJECT-TYPE
If enabled, the Group has permission to use modem dialback.
1.3.6.1.4.1.244.1.1.3.8.2.1.10EnabledStateread-onlycurrent
slcAuthGroupDialbackNum
OBJECT-TYPE
The dialback number defined for the Group.
1.3.6.1.4.1.244.1.1.3.8.2.1.11OCTET STRINGread-onlycurrent
slcDevices
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4
slcDevConsolePort
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.1
slcDevConBaud
OBJECT-TYPE
The baud rate of the Console Port.
1.3.6.1.4.1.244.1.1.4.1.1Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200)read-onlycurrent
slcDevConDataBits
OBJECT-TYPE
The data bits of the Console Port.
1.3.6.1.4.1.244.1.1.4.1.2Integer32 (7 | 8)read-onlycurrent
slcDevConStopBits
OBJECT-TYPE
The stop bits of the Console Port.
1.3.6.1.4.1.244.1.1.4.1.3Integer32 (1 | 2)read-onlycurrent
slcDevConParity
OBJECT-TYPE
The parity of the Console Port.
1.3.6.1.4.1.244.1.1.4.1.4INTEGER {none(1), odd(2), even(3)}read-onlycurrent
slcDevConFlowControl
OBJECT-TYPE
The flow control of the Console Port.
1.3.6.1.4.1.244.1.1.4.1.5INTEGER {none(1), xonxoff(2), rtscts(3)}read-onlycurrent
slcDevConTimeout
OBJECT-TYPE
The timeout (in minutes) for logins to the Console Port. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.1.6Integer32 (0..30)read-onlycurrent
slcDevConShowLines
OBJECT-TYPE
If enabled, upon connecting to the Console Port, a series of characters (or lines) output to the Console Port before it was connected to are displayed.
1.3.6.1.4.1.244.1.1.4.1.7EnabledStateread-onlycurrent
slcDevConNumberShowLines
OBJECT-TYPE
If slcDevConShowLines is enabled, the number of lines that are displayed upon connecting to the Console Port.
1.3.6.1.4.1.244.1.1.4.1.8Integer32 (1..50)read-onlycurrent
slcDevConGroup
OBJECT-TYPE
The group or groups that may access the Console Port.
1.3.6.1.4.1.244.1.1.4.1.9OCTET STRINGread-onlycurrent
slcDevDevicePorts
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.2
slcDevPortGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.2.1
slcDevGlobalListenPorts
OBJECT-TYPE
The Device Ports which remotely authenticated users have permission to access via 'connect listen'. This object has been replaced by permissions for each remote authentication method: slcAuthNISListenPorts, slcAuthLDAPListenPorts, slcAuthRADIUSListenPorts, slcAuthKerbListenPorts, slcAuthTACACSListenPorts.
1.3.6.1.4.1.244.1.1.4.2.1.1OCTET STRINGread-onlyobsolete
slcDevGlobalDataPorts
OBJECT-TYPE
The Device Ports which remotely authenticated users have permission to access via 'connect direct'. This object has been replaced by permissions for each remote authentication method: slcAuthNISDataPorts, slcAuthLDAPDataPorts, slcAuthRADIUSDataPorts, slcAuthKerbDataPorts, slcAuthTACACSDataPorts.
1.3.6.1.4.1.244.1.1.4.2.1.2OCTET STRINGread-onlyobsolete
slcDevGlobalClearPorts
OBJECT-TYPE
The Device Ports which remotely authenticated users have permission to clear. This object has been replaced by permissions for each remote authentication method: slcAuthNISClearPorts, slcAuthLDAPClearPorts, slcAuthRADIUSClearPorts, slcAuthKerbClearPorts, slcAuthTACACSClearPorts.
1.3.6.1.4.1.244.1.1.4.2.1.3OCTET STRINGread-onlyobsolete
slcDevGlobalStartTelnetPort
OBJECT-TYPE
The starting TCP port for Telnet in connections to Device Ports.
1.3.6.1.4.1.244.1.1.4.2.1.4Integer32 (0..65535)read-onlycurrent
slcDevGlobalStartSSHPort
OBJECT-TYPE
The starting TCP port for SSH in connections to Device Ports.
1.3.6.1.4.1.244.1.1.4.2.1.5Integer32 (0..65535)read-onlycurrent
slcDevGlobalStartTCPPort
OBJECT-TYPE
The starting TCP port for TCP in connections to Device Ports.
1.3.6.1.4.1.244.1.1.4.2.1.6Integer32 (0..65535)read-onlycurrent
slcDevGlobalMaxDirect
OBJECT-TYPE
The maximum number of direct connects allowed for each Device Port.
1.3.6.1.4.1.244.1.1.4.2.1.7Integer32 (0..10)read-onlyobsolete
slcDevPortConfig
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.2.2
slcDevPortCfgNumber
OBJECT-TYPE
The number of entries in the Device Port Configuration table.
1.3.6.1.4.1.244.1.1.4.2.2.1Integer32 (8 | 16 | 24 | 32 | 40 | 48)read-onlycurrent
slcDevPortCfgTable
OBJECT-TYPE
Table for managing Device Port configuration. The number of entries is given by the value of slcDevPortCfgNumber.
1.3.6.1.4.1.244.1.1.4.2.2.2not-accessiblecurrent
slcDevPortCfgEntry
OBJECT-TYPE
An entry containing all configuration settings for a Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1not-accessiblecurrent
slcDevPortId
OBJECT-TYPE
The identifier for a Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.1Integer32 (1..48)read-onlycurrent
slcDevPortCfgName
OBJECT-TYPE
The name of the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.2OCTET STRING (SIZE(1..30))read-onlycurrent
slcDevPortCfgDevice
OBJECT-TYPE
The device that is connected to the Device Port. The 'slp*' and 'servertech' values are deprecated and have been replaced by the RPM functionality.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.3INTEGER {none(1), slp8(2), slp16(3), slp8Exp8(4), slp8Exp16(5), slp16Exp8(6), slp16Exp16(7), sensorsoft(8), servertech(9), rpm(10)}read-onlycurrent
slcDevPortCfgDevLogin
OBJECT-TYPE
The login used to authenticate to the device connected to the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.4OCTET STRING (SIZE(1..32))read-onlycurrent
slcDevPortCfgBreakSeq
OBJECT-TYPE
The character sequence for the Device Port to send a break.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.5OCTET STRINGread-onlycurrent
slcDevPortCfgTelnetState
OBJECT-TYPE
If enabled, Telnet connections to the Device Port are allowed.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.6EnabledStateread-onlycurrent
slcDevPortCfgTelnetPort
OBJECT-TYPE
TCP Port number for Telnet in connections.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.7Integer32 (1025..65535)read-onlycurrent
slcDevPortCfgTelnetAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access a Device Port with Telnet.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.8EnabledStateread-onlycurrent
slcDevPortCfgSSHState
OBJECT-TYPE
If enabled, SSH connections to the Device Port are allowed.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.9EnabledStateread-onlycurrent
slcDevPortCfgSSHPort
OBJECT-TYPE
TCP Port number for SSH in connections.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.10Integer32 (1025..65535)read-onlycurrent
slcDevPortCfgSSHAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access a Device Port with SSH.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.11EnabledStateread-onlycurrent
slcDevPortCfgTCPState
OBJECT-TYPE
If enabled, TCP connections to the Device Port are allowed.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.12EnabledStateread-onlycurrent
slcDevPortCfgTCPPort
OBJECT-TYPE
TCP Port number for TCP in connections.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.13Integer32 (1025..65535)read-onlycurrent
slcDevPortCfgTCPAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access a Device Port with TCP.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.14EnabledStateread-onlycurrent
slcDevPortCfgIP
OBJECT-TYPE
The IP Address for Telnet, SSH or TCP in to a Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.15IpAddressread-onlycurrent
slcDevPortCfgBaud
OBJECT-TYPE
The baud rate of the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.16Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200)read-onlycurrent
slcDevPortCfgDataBits
OBJECT-TYPE
The data bits of the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.17Integer32 (7 | 8)read-onlycurrent
slcDevPortCfgStopBits
OBJECT-TYPE
The stop bits of the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.18Integer32 (1 | 2)read-onlycurrent
slcDevPortCfgParity
OBJECT-TYPE
The parity of the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.19INTEGER {none(1), odd(2), even(3)}read-onlycurrent
slcDevPortCfgFlowControl
OBJECT-TYPE
The flow control of the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.20INTEGER {none(1), xonxoff(2), rtscts(3)}read-onlycurrent
slcDevPortCfgLogins
OBJECT-TYPE
If enabled, authentication is required to access a serial device connected to a Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.21EnabledStateread-onlycurrent
slcDevPortCfgConnectDSR
OBJECT-TYPE
If enabled, the Device Port only establishes a connection if DSR (Data Set Ready) transitions to an asserted state.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.22EnabledStateread-onlycurrent
slcDevPortCfgDisconnectDSR
OBJECT-TYPE
If enabled, and a connection to a Device Port is currently in session, the connection will be terminated if DSR (Data Set Ready) transitions to a de-asserted state.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.23EnabledStateread-onlycurrent
slcDevPortCfgModemState
OBJECT-TYPE
For an external modem attached to the Device Port, indicates how the modem will be used.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.24INTEGER {disabled(1), dialout(2), dialin(3), dialback(4), dialondemand(5), dialinAndDialondemand(6), dialinHostList(7), cbcpServer(8), cbcpClient(9)}read-onlycurrent
slcDevPortCfgModemMode
OBJECT-TYPE
For an external modem attached to the Device Port, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
1.3.6.1.4.1.244.1.1.4.2.2.2.1.25INTEGER {ppp(1), text(2)}read-onlycurrent
slcDevPortCfgLocalIP
OBJECT-TYPE
For PPP connections, the local IP Address - all zeros if it should be negotiated.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.26IpAddressread-onlycurrent
slcDevPortCfgRemoteIP
OBJECT-TYPE
For PPP connections, the remote IP Address - all zeros if it should be negotiated.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.27IpAddressread-onlycurrent
slcDevPortCfgAuth
OBJECT-TYPE
For PPP connections, the type of authentication to be used.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.28INTEGER {pap(1), chap(2)}read-onlycurrent
slcDevPortCfgCHAPHost
OBJECT-TYPE
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.29OCTET STRINGread-onlycurrent
slcDevPortCfgInitScript
OBJECT-TYPE
The initialization script for an external modem.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.30OCTET STRINGread-onlycurrent
slcDevPortCfgTimeout
OBJECT-TYPE
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.31Integer32 (0..30)read-onlycurrent
slcDevPortCfgDialoutNum
OBJECT-TYPE
The phone number to use for dial-out connections.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.32OCTET STRINGread-onlycurrent
slcDevPortCfgDialoutLogin
OBJECT-TYPE
The login to use for dial-out connections.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.33OCTET STRING (SIZE(1..32))read-onlycurrent
slcDevPortCfgDialbackMode
OBJECT-TYPE
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.34INTEGER {usernumber(1), fixed(2)}read-onlycurrent
slcDevPortCfgDialbackNum
OBJECT-TYPE
The phone number to use for dial-back connections.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.35OCTET STRINGread-onlycurrent
slcDevPortCfgNATState
OBJECT-TYPE
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.36EnabledStateread-onlycurrent
slcDevPortCfgLocalState
OBJECT-TYPE
If enabled, local logging is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.37EnabledStateread-onlycurrent
slcDevPortCfgNFSFileState
OBJECT-TYPE
If enabled, NFS File logging is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.38EnabledStateread-onlycurrent
slcDevPortCfgNFSDir
OBJECT-TYPE
The local directory of a NFS mount to use for logging.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.39OCTET STRINGread-onlycurrent
slcDevPortCfgNFSMaxFiles
OBJECT-TYPE
The maximum number of files to use for NFS file logging.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.40Integer32read-onlycurrent
slcDevPortCfgNFSMaxSize
OBJECT-TYPE
The maximum size of each file (in bytes) for NFS File logging.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.41Integer32read-onlycurrent
slcDevPortCfgEmailState
OBJECT-TYPE
If enabled, Token and Data Detection (previously called 'Email Logging') is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.42EnabledStateread-onlycurrent
slcDevPortCfgEmailTrigger
OBJECT-TYPE
The type of trigger to use for Token and Data Detection (previously called 'Email Logging') - number of data bytes received, or token/character string received.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.43INTEGER {bytecnt(1), textstring(2)}read-onlycurrent
slcDevPortCfgEmailByteThresh
OBJECT-TYPE
When Token and Data Detection (previously called 'Email Logging') is configured to trigger on a data byte count, the number of bytes required to trigger an action.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.44Integer32read-onlycurrent
slcDevPortCfgEmailDelay
OBJECT-TYPE
For Token and Data Detection (previously called 'Email Logging'), a time limit of how long the device port will capture data after the data trigger is detected and before closing the log file and performing the selected actions. This setting is now called 'Action Delay'.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.45Integer32read-onlycurrent
slcDevPortCfgEmailRestartDelay
OBJECT-TYPE
For Token and Data Detection (previously called 'Email Logging'), the period of time, after performing the selected actions, during which the device port will ignore additional characters received.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.46Integer32read-onlycurrent
slcDevPortCfgEmailTextString
OBJECT-TYPE
When Token and Data Detection (previously called 'Email Logging') is configured to trigger on a character string, this defines the character string that will trigger an action.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.47OCTET STRINGread-onlycurrent
slcDevPortCfgEmailTo
OBJECT-TYPE
For Token and Data Detection (previously called 'Email Logging'), if the Email action is enabled, this object defines the list of emails to send email notification to.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.48OCTET STRINGread-onlycurrent
slcDevPortCfgEmailSubject
OBJECT-TYPE
For Token and Data Detection (previously called 'Email Logging'), if the Email action is enabled, this object defines the subject to include with email notification.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.49OCTET STRINGread-onlycurrent
slcDevPortCfgPCCardState
OBJECT-TYPE
If enabled, PC Card logging is enabled for the Device Port. This value will be undefined if the SLC does not have PC Card slots.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.50EnabledStateread-onlycurrent
slcDevPortCfgPCCardLogTo
OBJECT-TYPE
For PC Card logging, which PC Card slot to use for logging. This value will be undefined if the SLC does not have PC Card slots.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.51INTEGER {upperSlot(1), lowerSlot(2)}read-onlycurrent
slcDevPortCfgPCCardMaxFiles
OBJECT-TYPE
The maximum number of files to use for PC Card logging. This value will be undefined if the SLC does not have PC Card slots.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.52Integer32read-onlycurrent
slcDevPortCfgPCCardMaxSize
OBJECT-TYPE
The maximum size of each file (in bytes) for PC Card logging. This value will be undefined if the SLC does not have PC Card slots.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.53Integer32read-onlycurrent
slcDevPortCfgAction
OBJECT-TYPE
Performs an action on a Device Port. A read of this object always returns the value noAction(1). Setting this object to zeroPortCounters(2) will reset all port counters given in slcDevPortStateTable. Setting this object to clearLocalLog(3) will clear the local logging buffer. Setting this object to terminateConnections(4) will terminate all connections associated with the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.54INTEGER {noAction(1), zeroPortCounters(2), clearLocalLog(3), terminateConnections(4)}read-writecurrent
slcDevPortCfgEmailSend
OBJECT-TYPE
When a trigger is received, the type of notification to send: email, SNMP trap, or email and SNMP trap. This object is deprecated; instead refer to slcDevPortCfgTokenAction.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.55INTEGER {email(1), snmptrap(2), both(3)}read-onlycurrent
slcDevPortCfgBanner
OBJECT-TYPE
The banner displayed when the Device Port is connected to via SSH or Telnet.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.56OCTET STRINGread-onlycurrent
slcDevPortCfgIdleTimeout
OBJECT-TYPE
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.57Integer32read-onlycurrent
slcDevPortCfgRestartDelay
OBJECT-TYPE
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.58Integer32read-onlycurrent
slcDevPortCfgCallerIdLogging
OBJECT-TYPE
If enabled, caller id logging is enabled for a modem dial-in connection.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.59EnabledStateread-onlycurrent
slcDevPortCfgCallerIdATCmd
OBJECT-TYPE
The modem AT command required to initiate caller id logging by the modem.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.60OCTET STRINGread-onlycurrent
slcDevPortCfgDODAuth
OBJECT-TYPE
For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.61INTEGER {pap(1), chap(2)}read-onlycurrent
slcDevPortCfgDODCHAPHost
OBJECT-TYPE
For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.62OCTET STRINGread-onlycurrent
slcDevPortCfgSLMLoggingState
OBJECT-TYPE
If enabled, SLM logging is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.63EnabledStateread-onlycurrent
slcDevPortCfgSLMNMS
OBJECT-TYPE
The IP Addresses of up to three SNMP Network Management Stations defined used for SLM Logging. Multiple IP Addresses will be separated by a comma.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.64OCTET STRINGread-onlycurrent
slcDevPortCfgSLMByteThresh
OBJECT-TYPE
The number of bytes required to trigger SLM logging.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.65Integer32read-onlycurrent
slcDevPortCfgSLMTimeFrame
OBJECT-TYPE
The time frame for SLM logging, in seconds.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.66Integer32read-onlycurrent
slcDevPortCfgWebColumns
OBJECT-TYPE
The number of columns in the Web SSH or Telnet window for this Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.67Integer32read-onlycurrent
slcDevPortCfgWebRows
OBJECT-TYPE
The number of rows in the Web SSH or Telnet window for this Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.68Integer32read-onlycurrent
slcDevPortCfgSyslogState
OBJECT-TYPE
If enabled, Syslog logging is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.69EnabledStateread-onlycurrent
slcDevPortCfgHostList
OBJECT-TYPE
When slcDevPortCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.70OCTET STRINGread-onlycurrent
slcDevPortCfgDevLowTemp
OBJECT-TYPE
The low temperature limit, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.71Integer32read-onlycurrent
slcDevPortCfgDevHighTemp
OBJECT-TYPE
The high temperature limit, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.72Integer32read-onlycurrent
slcDevPortCfgDevTemperature
OBJECT-TYPE
The actual temperature, in Celsius, for the device connected to this Device Port. If the temperature is not applicable, an empty string will be returned.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.73OCTET STRINGread-onlycurrent
slcDevPortCfgDevLowHumidity
OBJECT-TYPE
The low humidty limit, in percentage, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.74Integer32read-onlycurrent
slcDevPortCfgDevHighHumidity
OBJECT-TYPE
The high humidty limit, in percentage, for the device connected to this Device Port. If the temperature is not applicable, 9999 will be returned.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.75Integer32read-onlycurrent
slcDevPortCfgDevHumidity
OBJECT-TYPE
The actual humidity, in percentage, for the device connected to this Device Port. If the temperature is not applicable, an empty string will be returned.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.76OCTET STRINGread-onlycurrent
slcDevPortCfgDevTraps
OBJECT-TYPE
If enabled, traps will be sent when one of the limits for the device connected to this Device Port are exceeded.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.77EnabledStateread-onlycurrent
slcDevPortCfgShowLines
OBJECT-TYPE
If enabled, upon connecting to the Device Port, a series of characters (or lines) output to the Device Port before it was connected to are displayed.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.78EnabledStateread-onlycurrent
slcDevPortCfgNumberShowLines
OBJECT-TYPE
If slcDevPortCfgShowLines is enabled, the number of lines that are displayed upon connecting to the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.79Integer32 (1..50)read-onlycurrent
slcDevPortCfgViewPortLog
OBJECT-TYPE
If enabled, upon using 'connect direct' to a Device Port, the slcDevPortCfgPortLogSeq key sequence can be typed to view the end of the port log for the current Device Port, or a different Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.80EnabledStateread-onlycurrent
slcDevPortCfgPortLogSeq
OBJECT-TYPE
The character sequence to view the port log for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.81OCTET STRINGread-onlycurrent
slcDevPortCfgMaxDirectConnects
OBJECT-TYPE
The maximum number of direct connects at the CLI for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.82Integer32read-onlycurrent
slcDevPortCfgTelnetTimeout
OBJECT-TYPE
The timeout (in seconds) for Telnet connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.83Integer32 (0..1800)read-onlycurrent
slcDevPortCfgSSHTimeout
OBJECT-TYPE
The timeout (in seconds) for SSH connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.84Integer32 (0..1800)read-onlycurrent
slcDevPortCfgTCPTimeout
OBJECT-TYPE
The timeout (in seconds) for TCP connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.85Integer32 (0..1800)read-onlycurrent
slcDevPortCfgCBCPClientType
OBJECT-TYPE
When slcDevPortCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.86INTEGER {adminDefined(1), userDefined(2)}read-onlycurrent
slcDevPortCfgCBCPServerAllowNoCallback
OBJECT-TYPE
If enabled and slcDevPortCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.87EnabledStateread-onlycurrent
slcDevPortCfgDialbackDelay
OBJECT-TYPE
When slcDevPortCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.88Integer32read-onlycurrent
slcDevPortCfgUSBState
OBJECT-TYPE
If enabled, USB logging is enabled for the Device Port. This value will be undefined if the SLC does not have USB Ports.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.89EnabledStateread-onlycurrent
slcDevPortCfgUSBLogTo
OBJECT-TYPE
For USB logging, which USB port to use for logging. This value will be undefined if the SLC does not have USB Ports.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.90Integer32read-onlycurrent
slcDevPortCfgUSBMaxFiles
OBJECT-TYPE
The maximum number of files to use for USB logging. This value will be undefined if the SLC does not have USB Ports.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.91Integer32read-onlycurrent
slcDevPortCfgUSBMaxSize
OBJECT-TYPE
The maximum size of each file (in bytes) for USB logging. This value will be undefined if the SLC does not have USB Ports.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.92Integer32read-onlycurrent
slcDevPortCfgCHAPAuthLocalUsers
OBJECT-TYPE
If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.93EnabledStateread-onlycurrent
slcDevPortCfgUseSites
OBJECT-TYPE
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.94EnabledStateread-onlycurrent
slcDevPortCfgDialbackRetries
OBJECT-TYPE
When slcDevPortCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.95Integer32read-onlycurrent
slcDevPortCfgGroup
OBJECT-TYPE
The group or groups that may access the Device Port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.96OCTET STRINGread-onlycurrent
slcDevPortCfgIPMask
OBJECT-TYPE
The network mask associated with slcDevPortCfgIPMask.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.97IpAddressread-onlycurrent
slcDevPortCfgDevPrompt
OBJECT-TYPE
If the device port is connected to a SLP or ServerTech CDU, specifies the prompt that is configured for the SLP or ServerTech CDU. This object is deprecated, and has been replaced by the RPM functionality.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.98OCTET STRINGread-onlycurrent
slcDevPortCfgDevNumOutlets
OBJECT-TYPE
If the device port is connected to a ServerTech CDU, specifies the number of outlets on the primary/master ServerTech unit. This object is deprecated, and has been replaced by the RPM functionality.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.99Integer32read-onlycurrent
slcDevPortCfgDevNumExpOutlets
OBJECT-TYPE
If the device port is connected to a ServerTech CDU, specifies the number of outlets on the expansion ServerTech unit. This object is deprecated, and has been replaced by the RPM functionality.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.100Integer32read-onlycurrent
slcDevPortCfgReversePinout
OBJECT-TYPE
If enabled, swaps the positions of the serial lines, such that the direction of data or the signal is reversed. For instance, TX is swapped with RX. Enabling Reverse Pinout facilitates connections to Cisco and Sun style RS-45 console ports using a straight through Ethernet patch cable, without the need for a rolled cable or adapter. Note that all Lantronix serial adapters are intended to be used with Reverse Pinout disabled.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.101EnabledStateread-onlycurrent
slcDevPortCfgUSBVBUS
OBJECT-TYPE
For SLC8000 USB Device Ports only. If enabled, the USB VBUS signal provides power to the USB device attached to a device port. Disabling VBUS will power down the device as long as it is bus-powered instead of self-powered.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.102EnabledStateread-onlycurrent
slcDevPortCfgAssertDTR
OBJECT-TYPE
For RJ45 Device Ports only. By default, DTR is asserted on a device port nearly all of the time (except momentarily when a port is opened for operations). Unchecking this option will deassert DTR, simulating a cable disconnection for the device that is connected to a device port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.103EnabledStateread-onlycurrent
slcDevPortCfgPortType
OBJECT-TYPE
Indicates the connector type on the device port: RJ45 or USB.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.104INTEGER {rj45(1), usb(2)}read-onlycurrent
slcDevPortCfgTelnetTimeoutDataDirection
OBJECT-TYPE
If slcDevPortCfgTelnetTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.105TimeoutDataDirectionread-onlycurrent
slcDevPortCfgSSHTimeoutDataDirection
OBJECT-TYPE
If slcDevPortCfgSSHTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.106TimeoutDataDirectionread-onlycurrent
slcDevPortCfgTCPTimeoutDataDirection
OBJECT-TYPE
If slcDevPortCfgTCPTimeout is enabled, this setting indicates the direction of data used to determine if the connection has timed out.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.107TimeoutDataDirectionread-onlycurrent
slcDevPortCfgIdleTimeoutMessage
OBJECT-TYPE
If enabled, a message will be displayed to a user when their connection to a device port will be terminated soon due to the connection being idle.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.108EnabledStateread-onlycurrent
slcDevPortCfgNumberOfSessionsMessage
OBJECT-TYPE
If enabled, a message will be displayed to a user when connecting to a device port that indicates how many users are currently connected to the device port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.109EnabledStateread-onlycurrent
slcDevPortCfgMinimizeLatency
OBJECT-TYPE
If enabled, device port latency will be minimized by reducing read delays.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.110EnabledStateread-onlycurrent
slcDevPortCfgTelnetSoftIAC
OBJECT-TYPE
If enabled, the Telnet server will not block waiting for the initial Telnet protocol IAC option responses.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.111EnabledStateread-onlycurrent
slcDevPortCfgSendTermString
OBJECT-TYPE
If enabled, and a slcDevPortCfgTerminationString is defined, when a network connection to a device port is terminated, the termination string is sent to the device connected to the device port. The string should be defined so that it sends the the appropriate command(s) to the device to terminate any active user sessions.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.112EnabledStateread-onlycurrent
slcDevPortCfgTerminationString
OBJECT-TYPE
The termination string sent to the device connected to the device port if slcDevPortCfgSendTermString is enabled.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.113OCTET STRINGread-onlycurrent
slcDevPortCfgPowerManagementSeq
OBJECT-TYPE
The key sequence that displays the Power Management menu when a user is connected to a device port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.114OCTET STRINGread-onlycurrent
slcDevPortCfgPowerSupplies
OBJECT-TYPE
A string that describes the managed power supplies configured for the device port. A device port can have up to four power supplies that provide power for the device connected to the device port. The string is a comma separated list of power supplies formatted: '<Power Suppy Name>(RPM Id/Outlet Id)'.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.115OCTET STRINGread-onlycurrent
slcDevPortCfgToggleDTR
OBJECT-TYPE
Applies to RJ45 device ports only. If enabled, when a user disconnects from a device port, DTR will be toggled. This feature can be used when a serial connection requires DSR to be active for the attached device to connect. In this case, toggling DTR will end any active connection on the device.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.116EnabledStateread-onlycurrent
slcDevPortCfgTokenAction
OBJECT-TYPE
For Token and Data Detection, a string containing one or more actions that will be performed if a data trigger occurs: syslog, email, trap, sendstring, powersupply.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.117OCTET STRINGread-onlycurrent
slcDevPortCfgTokenSendString
OBJECT-TYPE
For Token and Data Detection (previously called 'Email Logging'), if the Send String action is enabled, this object defines the string to send to the device connected to the device port.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.118OCTET STRINGread-onlycurrent
slcDevPortCfgTokenPowerSupply
OBJECT-TYPE
For Token and Data Detection (previously called 'Email Logging'), if the Control Power Supply action is enabled, this object defines the name of the managed power supply to perform an action on. This string can be 'all' for all managed power supplies associated with the device port, or an individual power supply name.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.119OCTET STRINGread-onlycurrent
slcDevPortCfgTokenPowerAction
OBJECT-TYPE
For Token and Data Detection (previously called 'Email Logging'), if the Control Power Supply action is enabled, this object defines the action to take on slcDevPortCfgTokenPowerSupply.
1.3.6.1.4.1.244.1.1.4.2.2.2.1.120INTEGER {turnOff(1), turnOn(2), cyclePower(3)}read-onlycurrent
slcDevPortState
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.2.3
slcDevPortStateNumber
OBJECT-TYPE
The number of entries in the Device Port State table.
1.3.6.1.4.1.244.1.1.4.2.3.1Integer32 (8 | 16 | 24 | 32 | 40 | 48)read-onlycurrent
slcDevPortStateTable
OBJECT-TYPE
Table of Device Port state entries. The number of entries is given by the value of slcDevPortStateNumber.
1.3.6.1.4.1.244.1.1.4.2.3.2not-accessiblecurrent
slcDevPortStateEntry
OBJECT-TYPE
An entry containing all state information for a Device Port.
1.3.6.1.4.1.244.1.1.4.2.3.2.1not-accessiblecurrent
slcDevPortStateIndex
OBJECT-TYPE
Reference index for each Device Port State entry.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.1Integer32 (1..48)read-onlycurrent
slcDevPortStateBytesInput
OBJECT-TYPE
The number of bytes input to the Device Port since boot or the last time Device Port statistics were zeroed.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.2Integer32read-onlycurrent
slcDevPortStateBytesOutput
OBJECT-TYPE
The number of bytes output from the Device Port since boot or the last time Device Port statistics were zeroed.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.3Integer32read-onlycurrent
slcDevPortStateFramingErrors
OBJECT-TYPE
The number of framing errors for the Device Port since boot or the last time Device Port statistics were zeroed.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.4Integer32read-onlycurrent
slcDevPortStateParityErrors
OBJECT-TYPE
The number of parity errors for the Device Port since boot or the last time Device Port statistics were zeroed.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.5Integer32read-onlycurrent
slcDevPortStateOverrunErrors
OBJECT-TYPE
The number of overrun errors for the Device Port since boot or the last time Device Port statistics were zeroed.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.6Integer32read-onlycurrent
slcDevPortStateFlowControlViolations
OBJECT-TYPE
The number of flow control violations for the Device Port since boot or the last time Device Port statistics were zeroed.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.7Integer32read-onlycurrent
slcDevPortStateDSR
OBJECT-TYPE
If enabled, Data Set Ready is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.8EnabledStateread-onlycurrent
slcDevPortStateDTR
OBJECT-TYPE
If enabled, Data Terminal Ready is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.9EnabledStateread-onlycurrent
slcDevPortStateCTS
OBJECT-TYPE
If enabled, Clear To Send is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.10EnabledStateread-onlycurrent
slcDevPortStateRTS
OBJECT-TYPE
If enabled, Request To Send is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.11EnabledStateread-onlycurrent
slcDevPortStateCD
OBJECT-TYPE
If enabled, Carrier Detect is enabled for the Device Port.
1.3.6.1.4.1.244.1.1.4.2.3.2.1.12EnabledStateread-onlycurrent
slcDevPCCard
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.3
slcPCCardCfgTable
OBJECT-TYPE
Table of PC Card configuration entries. There are two entries in the table, index (1) for the upper PC Card slot, and index (2) for the lower PC Card slot. This table will be empty if the SLC does not have PC Card slots.
1.3.6.1.4.1.244.1.1.4.3.1not-accessiblecurrent
slcPCCardCfgEntry
OBJECT-TYPE
An entry containing all configuration settings for a PC Card Slot.
1.3.6.1.4.1.244.1.1.4.3.1.1not-accessiblecurrent
slcPCCardCfgIndex
OBJECT-TYPE
Reference index for each PC Card Configuration entry.
1.3.6.1.4.1.244.1.1.4.3.1.1.1Integer32 (1..2)read-onlycurrent
slcPCCardCfgCardType
OBJECT-TYPE
The type of PC Card in the slot.
1.3.6.1.4.1.244.1.1.4.3.1.1.2INTEGER {none(1), storage(2), modem(3), isdn(4), wireless(5), gsmmodem(6)}read-onlycurrent
slcPCCardCfgCardId
OBJECT-TYPE
The identifying string of the card in the slot.
1.3.6.1.4.1.244.1.1.4.3.1.1.3OCTET STRINGread-onlycurrent
slcPCCardCfgBaud
OBJECT-TYPE
For ISDN and modem cards, the baud rate.
1.3.6.1.4.1.244.1.1.4.3.1.1.4Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200)read-onlycurrent
slcPCCardCfgDataBits
OBJECT-TYPE
For ISDN and modem cards, the data bits.
1.3.6.1.4.1.244.1.1.4.3.1.1.5Integer32 (7 | 8)read-onlycurrent
slcPCCardCfgStopBits
OBJECT-TYPE
For ISDN and modem cards, the stop bits.
1.3.6.1.4.1.244.1.1.4.3.1.1.6Integer32 (1 | 2)read-onlycurrent
slcPCCardCfgParity
OBJECT-TYPE
For ISDN and modem cards, the parity.
1.3.6.1.4.1.244.1.1.4.3.1.1.7INTEGER {none(1), odd(2), even(3)}read-onlycurrent
slcPCCardCfgFlowControl
OBJECT-TYPE
For ISDN and modem cards, the flow control.
1.3.6.1.4.1.244.1.1.4.3.1.1.8INTEGER {none(1), xonxoff(2), rtscts(3)}read-onlycurrent
slcPCCardCfgModemState
OBJECT-TYPE
For ISDN and modem cards, indicates how the modem will be used.
1.3.6.1.4.1.244.1.1.4.3.1.1.9INTEGER {disabled(1), dialout(2), dialin(3), dialback(4), dialondemand(5), dialinAndDialondemand(6), dialinHostList(7), cbcpServer(8), cbcpClient(9)}read-onlycurrent
slcPCCardCfgModemMode
OBJECT-TYPE
For ISDN and modem cards, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
1.3.6.1.4.1.244.1.1.4.3.1.1.10INTEGER {ppp(1), text(2)}read-onlycurrent
slcPCCardCfgLocalIP
OBJECT-TYPE
For PPP connections, the local IP Address (all zeros if it should be negotiated).
1.3.6.1.4.1.244.1.1.4.3.1.1.11IpAddressread-onlycurrent
slcPCCardCfgRemoteIP
OBJECT-TYPE
For PPP connections, the remote IP Address (all zeros if it should be negotiated).
1.3.6.1.4.1.244.1.1.4.3.1.1.12IpAddressread-onlycurrent
slcPCCardCfgAuth
OBJECT-TYPE
For PPP connections, the type of authentication to be used.
1.3.6.1.4.1.244.1.1.4.3.1.1.13INTEGER {pap(1), chap(2)}read-onlycurrent
slcPCCardCfgCHAPHost
OBJECT-TYPE
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
1.3.6.1.4.1.244.1.1.4.3.1.1.14OCTET STRINGread-onlycurrent
slcPCCardCfgInitScript
OBJECT-TYPE
The initialization script for an external modem.
1.3.6.1.4.1.244.1.1.4.3.1.1.15OCTET STRINGread-onlycurrent
slcPCCardCfgTimeout
OBJECT-TYPE
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.3.1.1.16Integer32 (0..30)read-onlycurrent
slcPCCardCfgDialoutNum
OBJECT-TYPE
The phone number to use for dial-out connections.
1.3.6.1.4.1.244.1.1.4.3.1.1.17OCTET STRINGread-onlycurrent
slcPCCardCfgDialoutLogin
OBJECT-TYPE
The login to use for dial-out connections.
1.3.6.1.4.1.244.1.1.4.3.1.1.18OCTET STRING (SIZE(1..32))read-onlycurrent
slcPCCardCfgDialbackMode
OBJECT-TYPE
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
1.3.6.1.4.1.244.1.1.4.3.1.1.19INTEGER {usernumber(1), fixed(2)}read-onlycurrent
slcPCCardCfgDialbackNum
OBJECT-TYPE
The phone number to use for dial-back connections.
1.3.6.1.4.1.244.1.1.4.3.1.1.20OCTET STRINGread-onlycurrent
slcPCCardCfgNATState
OBJECT-TYPE
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
1.3.6.1.4.1.244.1.1.4.3.1.1.21EnabledStateread-onlycurrent
slcPCCardCfgStorageFS
OBJECT-TYPE
For storage cards, the type of filesystem on the card.
1.3.6.1.4.1.244.1.1.4.3.1.1.22INTEGER {notmounted(1), ext2(2), fat(3)}read-onlycurrent
slcPCCardCfgISDNChannel
OBJECT-TYPE
The channel on the ISDN card to use, either 1 or 2.
1.3.6.1.4.1.244.1.1.4.3.1.1.23Integer32read-onlycurrent
slcPCCardCfgISDNChannelNum
OBJECT-TYPE
The phone number associated with the selected ISDN channel.
1.3.6.1.4.1.244.1.1.4.3.1.1.24OCTET STRINGread-onlycurrent
slcPCCardCfgTelnetState
OBJECT-TYPE
If enabled, Telnet connections to the modem/ISDN PC Card are allowed.
1.3.6.1.4.1.244.1.1.4.3.1.1.25EnabledStateread-onlycurrent
slcPCCardCfgTelnetPort
OBJECT-TYPE
TCP Port number for Telnet connections directly to the modem/ISDN PC Card.
1.3.6.1.4.1.244.1.1.4.3.1.1.26Integer32 (1025..65535)read-onlycurrent
slcPCCardCfgTelnetAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with Telnet.
1.3.6.1.4.1.244.1.1.4.3.1.1.27EnabledStateread-onlycurrent
slcPCCardCfgSSHState
OBJECT-TYPE
If enabled, SSH connections to the modem/ISDN PC Card are allowed.
1.3.6.1.4.1.244.1.1.4.3.1.1.28EnabledStateread-onlycurrent
slcPCCardCfgSSHPort
OBJECT-TYPE
TCP Port number for SSH connections directly to the modem/ISDN PC Card.
1.3.6.1.4.1.244.1.1.4.3.1.1.29Integer32 (1025..65535)read-onlycurrent
slcPCCardCfgSSHAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with SSH.
1.3.6.1.4.1.244.1.1.4.3.1.1.30EnabledStateread-onlycurrent
slcPCCardCfgTCPState
OBJECT-TYPE
If enabled, TCP connections to the modem/ISDN PC Card are allowed.
1.3.6.1.4.1.244.1.1.4.3.1.1.31EnabledStateread-onlycurrent
slcPCCardCfgTCPPort
OBJECT-TYPE
TCP Port number for TCP connections directly to the modem/ISDN PC Card.
1.3.6.1.4.1.244.1.1.4.3.1.1.32Integer32 (1025..65535)read-onlycurrent
slcPCCardCfgTCPAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with TCP.
1.3.6.1.4.1.244.1.1.4.3.1.1.33EnabledStateread-onlycurrent
slcPCCardCfgGSMPIN
OBJECT-TYPE
The PIN associated with the GSM/GPRS PC Card modem.
1.3.6.1.4.1.244.1.1.4.3.1.1.34OCTET STRINGread-onlycurrent
slcPCCardCfgGSMNetworkName
OBJECT-TYPE
The Network Name associated with the GSM/GPRS PC Card modem.
1.3.6.1.4.1.244.1.1.4.3.1.1.35OCTET STRINGread-onlyobsolete
slcPCCardCfgGSMPPPCompression
OBJECT-TYPE
If enabled, PPP compression is enabled for GSM/GPRS PC Card modem connections.
1.3.6.1.4.1.244.1.1.4.3.1.1.36EnabledStateread-onlycurrent
slcPCCardCfgGSMAutoAcquireDNS
OBJECT-TYPE
If enabled, DNS servers will be acquired vi GSM/GPRS PC Card modem PPP connections.
1.3.6.1.4.1.244.1.1.4.3.1.1.37EnabledStateread-onlycurrent
slcPCCardCfgGSMDialoutMode
OBJECT-TYPE
The mode to be used for GSM/GPRS PC Card modems configured for dialout.
1.3.6.1.4.1.244.1.1.4.3.1.1.38INTEGER {gprs(1), gsm(2)}read-onlycurrent
slcPCCardCfgGSMContextID
OBJECT-TYPE
The Context Id string used for GSM/GPRS PC Card modems configured for GPRS dialout mode.
1.3.6.1.4.1.244.1.1.4.3.1.1.39OCTET STRINGread-onlycurrent
slcPCCardCfgGSMBearerService
OBJECT-TYPE
The Bearer Service Type string used for GSM/GPRS PC Card modems configured for GSM dialin/dialout mode.
1.3.6.1.4.1.244.1.1.4.3.1.1.40OCTET STRINGread-onlycurrent
slcPCCardCfgIdleTimeout
OBJECT-TYPE
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.3.1.1.41Integer32read-onlycurrent
slcPCCardCfgRestartDelay
OBJECT-TYPE
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
1.3.6.1.4.1.244.1.1.4.3.1.1.42Integer32read-onlycurrent
slcPCCardCfgCallerIdLogging
OBJECT-TYPE
If enabled, caller id logging is enabled for a modem dial-in connection.
1.3.6.1.4.1.244.1.1.4.3.1.1.43EnabledStateread-onlycurrent
slcPCCardCfgCallerIdATCmd
OBJECT-TYPE
The modem AT command required to initiate caller id logging by the modem.
1.3.6.1.4.1.244.1.1.4.3.1.1.44OCTET STRINGread-onlycurrent
slcPCCardCfgDODAuth
OBJECT-TYPE
For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
1.3.6.1.4.1.244.1.1.4.3.1.1.45INTEGER {pap(1), chap(2)}read-onlycurrent
slcPCCardCfgDODCHAPHost
OBJECT-TYPE
For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use.
1.3.6.1.4.1.244.1.1.4.3.1.1.46OCTET STRINGread-onlycurrent
slcPCCardCfgHostList
OBJECT-TYPE
When slcPCCardCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in.
1.3.6.1.4.1.244.1.1.4.3.1.1.47OCTET STRINGread-onlycurrent
slcPCCardCfgCBCPClientType
OBJECT-TYPE
When slcPCCardCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
1.3.6.1.4.1.244.1.1.4.3.1.1.48INTEGER {adminDefined(1), userDefined(2)}read-onlycurrent
slcPCCardCfgCBCPServerAllowNoCallback
OBJECT-TYPE
If enabled and slcPCCardCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
1.3.6.1.4.1.244.1.1.4.3.1.1.49EnabledStateread-onlycurrent
slcPCCardCfgDialbackDelay
OBJECT-TYPE
When slcPCCardCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
1.3.6.1.4.1.244.1.1.4.3.1.1.50Integer32read-onlycurrent
slcPCCardCfgCHAPAuthLocalUsers
OBJECT-TYPE
If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem.
1.3.6.1.4.1.244.1.1.4.3.1.1.51EnabledStateread-onlycurrent
slcPCCardCfgUseSites
OBJECT-TYPE
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem.
1.3.6.1.4.1.244.1.1.4.3.1.1.52EnabledStateread-onlycurrent
slcPCCardCfgDialbackRetries
OBJECT-TYPE
When slcPCCardCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
1.3.6.1.4.1.244.1.1.4.3.1.1.53Integer32read-onlycurrent
slcPCCardCfgGroup
OBJECT-TYPE
The group or groups that may access the PC Card slot.
1.3.6.1.4.1.244.1.1.4.3.1.1.54OCTET STRINGread-onlycurrent
slcDevPowerSupply
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.4
slcDevPowerSupplyType
OBJECT-TYPE
The type of power supply for the SLC.
1.3.6.1.4.1.244.1.1.4.4.1INTEGER {acOnePowerSupply(1), acTwoPowerSupplies(2), dcTwoPowerSupplies(3)}read-onlycurrent
slcDevPowerSupplyA
OBJECT-TYPE
The status of Power Supply A.
1.3.6.1.4.1.244.1.1.4.4.2INTEGER {up(1), down(2)}read-onlycurrent
slcDevPowerSupplyB
OBJECT-TYPE
The status of Power Supply B.
1.3.6.1.4.1.244.1.1.4.4.3INTEGER {up(1), down(2), notInstalled(3)}read-onlycurrent
slcDevUSB
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.5
slcDevUSBState
OBJECT-TYPE
If enabled, the USB devices connected to the SLC will be accessible. This value will be undefined if the SLC does not have USB Ports.
1.3.6.1.4.1.244.1.1.4.5.1EnabledStateread-onlycurrent
slcDevUSBCfgTable
OBJECT-TYPE
Table of USB configuration entries. There is one entry in the table, index (1) for USB port 1. This table will be empty if the SLC does not have USB Ports.
1.3.6.1.4.1.244.1.1.4.5.2not-accessiblecurrent
slcDevUSBCfgEntry
OBJECT-TYPE
An entry containing all configuration settings for a USB port.
1.3.6.1.4.1.244.1.1.4.5.2.1not-accessiblecurrent
slcDevUSBId
OBJECT-TYPE
The identifier for a USB Port (1 indicates USB Port U1).
1.3.6.1.4.1.244.1.1.4.5.2.1.1Integer32 (1)read-onlycurrent
slcDevUSBCfgCardType
OBJECT-TYPE
The type of USB device in the port.
1.3.6.1.4.1.244.1.1.4.5.2.1.2INTEGER {none(1), storage(2), modem(3), isdn(4), wireless(5), gsmmodem(6)}read-onlycurrent
slcDevUSBCfgCardId
OBJECT-TYPE
The identifying string of the device in the port.
1.3.6.1.4.1.244.1.1.4.5.2.1.3OCTET STRINGread-onlycurrent
slcDevUSBCfgStorageFS
OBJECT-TYPE
For thumb drives, the type of filesystem on the card.
1.3.6.1.4.1.244.1.1.4.5.2.1.4INTEGER {notmounted(1), ext2(2), fat(3)}read-onlycurrent
slcDevUSBCfgBaud
OBJECT-TYPE
For modem cards, the baud rate.
1.3.6.1.4.1.244.1.1.4.5.2.1.5Integer32 (300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200)read-onlycurrent
slcDevUSBCfgDataBits
OBJECT-TYPE
For modem cards, the data bits.
1.3.6.1.4.1.244.1.1.4.5.2.1.6Integer32 (7 | 8)read-onlycurrent
slcDevUSBCfgStopBits
OBJECT-TYPE
For modem cards, the stop bits.
1.3.6.1.4.1.244.1.1.4.5.2.1.7Integer32 (1 | 2)read-onlycurrent
slcDevUSBCfgParity
OBJECT-TYPE
For modem cards, the parity.
1.3.6.1.4.1.244.1.1.4.5.2.1.8INTEGER {none(1), odd(2), even(3)}read-onlycurrent
slcDevUSBCfgFlowControl
OBJECT-TYPE
For modem cards, the flow control.
1.3.6.1.4.1.244.1.1.4.5.2.1.9INTEGER {none(1), xonxoff(2), rtscts(3)}read-onlycurrent
slcDevUSBCfgModemState
OBJECT-TYPE
For modem cards, indicates how the modem will be used.
1.3.6.1.4.1.244.1.1.4.5.2.1.10INTEGER {disabled(1), dialout(2), dialin(3), dialback(4), dialondemand(5), dialinAndDialondemand(6), dialinHostList(7), cbcpServer(8), cbcpClient(9)}read-onlycurrent
slcDevUSBCfgModemMode
OBJECT-TYPE
For modem cards, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
1.3.6.1.4.1.244.1.1.4.5.2.1.11INTEGER {ppp(1), text(2)}read-onlycurrent
slcDevUSBCfgLocalIP
OBJECT-TYPE
For PPP connections, the local IP Address (all zeros if it should be negotiated).
1.3.6.1.4.1.244.1.1.4.5.2.1.12IpAddressread-onlycurrent
slcDevUSBCfgRemoteIP
OBJECT-TYPE
For PPP connections, the remote IP Address (all zeros if it should be negotiated).
1.3.6.1.4.1.244.1.1.4.5.2.1.13IpAddressread-onlycurrent
slcDevUSBCfgAuth
OBJECT-TYPE
For PPP connections, the type of authentication to be used.
1.3.6.1.4.1.244.1.1.4.5.2.1.14INTEGER {pap(1), chap(2)}read-onlycurrent
slcDevUSBCfgCHAPHost
OBJECT-TYPE
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
1.3.6.1.4.1.244.1.1.4.5.2.1.15OCTET STRINGread-onlycurrent
slcDevUSBCfgDODAuth
OBJECT-TYPE
For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
1.3.6.1.4.1.244.1.1.4.5.2.1.16INTEGER {pap(1), chap(2)}read-onlycurrent
slcDevUSBCfgDODCHAPHost
OBJECT-TYPE
For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use.
1.3.6.1.4.1.244.1.1.4.5.2.1.17OCTET STRINGread-onlycurrent
slcDevUSBCfgInitScript
OBJECT-TYPE
The initialization script for a modem.
1.3.6.1.4.1.244.1.1.4.5.2.1.18OCTET STRINGread-onlycurrent
slcDevUSBCfgTimeout
OBJECT-TYPE
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.5.2.1.19Integer32 (0..30)read-onlycurrent
slcDevUSBCfgDialoutNum
OBJECT-TYPE
The phone number to use for dial-out connections.
1.3.6.1.4.1.244.1.1.4.5.2.1.20OCTET STRINGread-onlycurrent
slcDevUSBCfgDialoutLogin
OBJECT-TYPE
The login to use for dial-out connections.
1.3.6.1.4.1.244.1.1.4.5.2.1.21OCTET STRING (SIZE(1..32))read-onlycurrent
slcDevUSBCfgDialbackMode
OBJECT-TYPE
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
1.3.6.1.4.1.244.1.1.4.5.2.1.22INTEGER {usernumber(1), fixed(2)}read-onlycurrent
slcDevUSBCfgDialbackNum
OBJECT-TYPE
The phone number to use for dial-back connections.
1.3.6.1.4.1.244.1.1.4.5.2.1.23OCTET STRINGread-onlycurrent
slcDevUSBCfgDialbackDelay
OBJECT-TYPE
When slcDevUSBCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
1.3.6.1.4.1.244.1.1.4.5.2.1.24Integer32read-onlycurrent
slcDevUSBCfgNATState
OBJECT-TYPE
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
1.3.6.1.4.1.244.1.1.4.5.2.1.25EnabledStateread-onlycurrent
slcDevUSBCfgIdleTimeout
OBJECT-TYPE
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.5.2.1.26Integer32read-onlycurrent
slcDevUSBCfgRestartDelay
OBJECT-TYPE
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
1.3.6.1.4.1.244.1.1.4.5.2.1.27Integer32read-onlycurrent
slcDevUSBCfgCallerIdLogging
OBJECT-TYPE
If enabled, caller id logging is enabled for a modem dial-in connection.
1.3.6.1.4.1.244.1.1.4.5.2.1.28EnabledStateread-onlycurrent
slcDevUSBCfgCallerIdATCmd
OBJECT-TYPE
The modem AT command required to initiate caller id logging by the modem.
1.3.6.1.4.1.244.1.1.4.5.2.1.29OCTET STRINGread-onlycurrent
slcDevUSBCfgHostList
OBJECT-TYPE
When slcDevUSBCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in.
1.3.6.1.4.1.244.1.1.4.5.2.1.30OCTET STRINGread-onlycurrent
slcDevUSBCfgCBCPClientType
OBJECT-TYPE
When slcDevUSBCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
1.3.6.1.4.1.244.1.1.4.5.2.1.31INTEGER {adminDefined(1), userDefined(2)}read-onlycurrent
slcDevUSBCfgCBCPServerAllowNoCallback
OBJECT-TYPE
If enabled and slcDevUSBCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
1.3.6.1.4.1.244.1.1.4.5.2.1.32EnabledStateread-onlycurrent
slcDevUSBCfgTelnetState
OBJECT-TYPE
If enabled, Telnet connections to the USB modem are allowed.
1.3.6.1.4.1.244.1.1.4.5.2.1.33EnabledStateread-onlycurrent
slcDevUSBCfgTelnetPort
OBJECT-TYPE
TCP Port number for Telnet connections directly to the USB modem.
1.3.6.1.4.1.244.1.1.4.5.2.1.34Integer32 (1025..65535)read-onlycurrent
slcDevUSBCfgTelnetAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access the USB modem with Telnet.
1.3.6.1.4.1.244.1.1.4.5.2.1.35EnabledStateread-onlycurrent
slcDevUSBCfgSSHState
OBJECT-TYPE
If enabled, SSH connections to the USB modem are allowed.
1.3.6.1.4.1.244.1.1.4.5.2.1.36EnabledStateread-onlycurrent
slcDevUSBCfgSSHPort
OBJECT-TYPE
TCP Port number for SSH connections directly to the USB modem.
1.3.6.1.4.1.244.1.1.4.5.2.1.37Integer32 (1025..65535)read-onlycurrent
slcDevUSBCfgSSHAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access the USB modem with SSH.
1.3.6.1.4.1.244.1.1.4.5.2.1.38EnabledStateread-onlycurrent
slcDevUSBCfgTCPState
OBJECT-TYPE
If enabled, TCP connections to the USB modem are allowed.
1.3.6.1.4.1.244.1.1.4.5.2.1.39EnabledStateread-onlycurrent
slcDevUSBCfgTCPPort
OBJECT-TYPE
TCP Port number for TCP connections directly to the USB modem.
1.3.6.1.4.1.244.1.1.4.5.2.1.40Integer32 (1025..65535)read-onlycurrent
slcDevUSBCfgTCPAuth
OBJECT-TYPE
If enabled, the user is required to authenticate to access the USB modem with TCP.
1.3.6.1.4.1.244.1.1.4.5.2.1.41EnabledStateread-onlycurrent
slcDevUSBCfgGSMPIN
OBJECT-TYPE
The PIN associated with the GSM/GPRS modem.
1.3.6.1.4.1.244.1.1.4.5.2.1.42OCTET STRINGread-onlycurrent
slcDevUSBCfgGSMPPPCompression
OBJECT-TYPE
If enabled, PPP compression is enabled GSM/GPRS modem connections.
1.3.6.1.4.1.244.1.1.4.5.2.1.43EnabledStateread-onlycurrent
slcDevUSBCfgGSMAutoAcquireDNS
OBJECT-TYPE
If enabled, DNS servers will be acquired vi GSM/GPRS modem PPP connections.
1.3.6.1.4.1.244.1.1.4.5.2.1.44EnabledStateread-onlycurrent
slcDevUSBCfgGSMDialoutMode
OBJECT-TYPE
The mode to be used for GSM/GPRS modems configured for dialout.
1.3.6.1.4.1.244.1.1.4.5.2.1.45INTEGER {gprs(1), gsm(2)}read-onlycurrent
slcDevUSBCfgGSMContextID
OBJECT-TYPE
The Context Id string used for GSM/GPRS modems configured for GPRS dialout mode.
1.3.6.1.4.1.244.1.1.4.5.2.1.46OCTET STRINGread-onlycurrent
slcDevUSBCfgGSMBearerService
OBJECT-TYPE
The Bearer Service Type string used for GSM/GPRS modems configured for GSM dialin/dialout mode.
1.3.6.1.4.1.244.1.1.4.5.2.1.47OCTET STRINGread-onlycurrent
slcDevUSBCfgCHAPAuthLocalUsers
OBJECT-TYPE
If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP host and secret associated with a modem.
1.3.6.1.4.1.244.1.1.4.5.2.1.48EnabledStateread-onlycurrent
slcDevUSBCfgUseSites
OBJECT-TYPE
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem.
1.3.6.1.4.1.244.1.1.4.5.2.1.49EnabledStateread-onlycurrent
slcDevUSBCfgDialbackRetries
OBJECT-TYPE
When slcDevUSBCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
1.3.6.1.4.1.244.1.1.4.5.2.1.50Integer32read-onlycurrent
slcDevUSBCfgDialtoneCheck
OBJECT-TYPE
The time (in minutes) between checks for a modem dialtone. A value of 0 indicates that dialtone checks are disabled.
1.3.6.1.4.1.244.1.1.4.5.2.1.51Integer32 (0..600)read-onlycurrent
slcDevUSBCfgGroup
OBJECT-TYPE
The group or groups that may access the USB port.
1.3.6.1.4.1.244.1.1.4.5.2.1.52OCTET STRINGread-onlycurrent
slcDevIntModem
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.6
slcDevIntModemModemState
OBJECT-TYPE
For the SLC internal modem, indicates how the modem will be used.
1.3.6.1.4.1.244.1.1.4.6.1INTEGER {disabled(1), dialout(2), dialin(3), dialback(4)}read-onlycurrent
slcDevIntModemModemMode
OBJECT-TYPE
For the SLC internal modem, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
1.3.6.1.4.1.244.1.1.4.6.2INTEGER {ppp(1), text(2)}read-onlycurrent
slcDevIntModemLocalIP
OBJECT-TYPE
For PPP connections, the local IP Address - all zeros if it should be negotiated.
1.3.6.1.4.1.244.1.1.4.6.3IpAddressread-onlycurrent
slcDevIntModemRemoteIP
OBJECT-TYPE
For PPP connections, the remote IP Address - all zeros if it should be negotiated.
1.3.6.1.4.1.244.1.1.4.6.4IpAddressread-onlycurrent
slcDevIntModemAuth
OBJECT-TYPE
For PPP connections, the type of authentication to be used.
1.3.6.1.4.1.244.1.1.4.6.5INTEGER {pap(1), chap(2)}read-onlycurrent
slcDevIntModemCHAPHost
OBJECT-TYPE
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
1.3.6.1.4.1.244.1.1.4.6.6OCTET STRINGread-onlycurrent
slcDevIntModemInitScript
OBJECT-TYPE
The initialization script for an internal modem.
1.3.6.1.4.1.244.1.1.4.6.7OCTET STRINGread-onlycurrent
slcDevIntModemTimeout
OBJECT-TYPE
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.6.8Integer32 (0..30)read-onlycurrent
slcDevIntModemDialoutNum
OBJECT-TYPE
The phone number to use for dial-out connections.
1.3.6.1.4.1.244.1.1.4.6.9OCTET STRINGread-onlycurrent
slcDevIntModemDialoutLogin
OBJECT-TYPE
The login to use for dial-out connections.
1.3.6.1.4.1.244.1.1.4.6.10OCTET STRING (SIZE(1..32))read-onlycurrent
slcDevIntModemDialbackMode
OBJECT-TYPE
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the internal modem.
1.3.6.1.4.1.244.1.1.4.6.11INTEGER {usernumber(1), fixed(2)}read-onlycurrent
slcDevIntModemDialbackNum
OBJECT-TYPE
The phone number to use for dial-back connections.
1.3.6.1.4.1.244.1.1.4.6.12OCTET STRINGread-onlycurrent
slcDevIntModemDialbackRetries
OBJECT-TYPE
When slcDevIntModemModemState is set to dialback, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out fails.
1.3.6.1.4.1.244.1.1.4.6.13Integer32read-onlycurrent
slcDevIntModemDialbackDelay
OBJECT-TYPE
When slcDevIntModemModemState is set to dialback, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
1.3.6.1.4.1.244.1.1.4.6.14Integer32read-onlycurrent
slcDevIntModemCallerIdLogging
OBJECT-TYPE
If enabled, caller id logging is enabled for a modem dial-in connection.
1.3.6.1.4.1.244.1.1.4.6.15EnabledStateread-onlycurrent
slcDevIntModemCallerIdATCmd
OBJECT-TYPE
The modem AT command required to initiate caller id logging by the modem.
1.3.6.1.4.1.244.1.1.4.6.16OCTET STRINGread-onlycurrent
slcDevIntModemUseSites
OBJECT-TYPE
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand connections, etc.) will be used instead of the parameters configured for the modem.
1.3.6.1.4.1.244.1.1.4.6.17EnabledStateread-onlycurrent
slcDevIntModemGroup
OBJECT-TYPE
The group or groups that may access the internal modem connection.
1.3.6.1.4.1.244.1.1.4.6.18OCTET STRINGread-onlycurrent
slcDevIntModemIdleTimeout
OBJECT-TYPE
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP connection will be terminated. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.4.6.19Integer32read-onlycurrent
slcDevIntModemRestartDelay
OBJECT-TYPE
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
1.3.6.1.4.1.244.1.1.4.6.20Integer32read-onlycurrent
slcDevIntModemNATState
OBJECT-TYPE
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
1.3.6.1.4.1.244.1.1.4.6.21EnabledStateread-onlycurrent
slcDevIntModemDialtoneCheck
OBJECT-TYPE
The time (in minutes) between checks for a modem dialtone. A value of 0 indicates that dialtone checks are disabled.
1.3.6.1.4.1.244.1.1.4.6.22Integer32 (0..600)read-onlycurrent
slcDevRPM
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.4.7
slcDevRPMCfgTable
OBJECT-TYPE
Table of RPM configuration entries.
1.3.6.1.4.1.244.1.1.4.7.1not-accessiblecurrent
slcDevRPMCfgEntry
OBJECT-TYPE
An entry containing all configuration settings for an RPM, as well as some top level status information for the RPM.
1.3.6.1.4.1.244.1.1.4.7.1.1not-accessiblecurrent
slcDevRPMId
OBJECT-TYPE
The unique identifier for an RPM device.
1.3.6.1.4.1.244.1.1.4.7.1.1.1Integer32 (1..100)read-onlycurrent
slcDevRPMName
OBJECT-TYPE
The name of the RPM.
1.3.6.1.4.1.244.1.1.4.7.1.1.2OCTET STRING (SIZE(1..20))read-onlycurrent
slcDevRPMVendorModel
OBJECT-TYPE
The manufacture and model of the RPM.
1.3.6.1.4.1.244.1.1.4.7.1.1.3OCTET STRINGread-onlycurrent
slcDevRPMManagedVia
OBJECT-TYPE
The method of control for managing the RPM.
1.3.6.1.4.1.244.1.1.4.7.1.1.4INTEGER {serial(1), network(2), snmp(3), usb(4)}read-onlycurrent
slcDevRPMIPAddress
OBJECT-TYPE
For SNMP and network managed RPMs, the IP Address of the RPM.
1.3.6.1.4.1.244.1.1.4.7.1.1.5IpAddressread-onlycurrent
slcDevRPMPort
OBJECT-TYPE
For network managed RPMs, the TCP port to use to connect to the RPM. For USB managed RPMs, the USB port the device is connected to (0 indicates a port on the front of the SLC). For serially managed RPMs, the RJ45 device port the device is connected to.
1.3.6.1.4.1.244.1.1.4.7.1.1.6Integer32read-onlycurrent
slcDevRPMDriverOpts
OBJECT-TYPE
Any driver options that are configured for the RPM. This option is mostly used for the USB vendor and product id.
1.3.6.1.4.1.244.1.1.4.7.1.1.7OCTET STRINGread-onlycurrent
slcDevRPMStatus
OBJECT-TYPE
The current status for the RPM; for example, 'OL' to indicate 'Online' for a UPS. This object may be blank if the device does not report a status, or if the device is not in an error state.
1.3.6.1.4.1.244.1.1.4.7.1.1.8OCTET STRINGread-onlycurrent
slcDevRPMFirmwareVersion
OBJECT-TYPE
The current firmware version of the RPM. This object may be blank if the device does not report its firmware version.
1.3.6.1.4.1.244.1.1.4.7.1.1.9OCTET STRINGread-onlycurrent
slcDevRPMSerialNumber
OBJECT-TYPE
The serial number of the RPM. This object may be blank if the device does not report its serial number.
1.3.6.1.4.1.244.1.1.4.7.1.1.10OCTET STRINGread-onlycurrent
slcDevRPMMACAddress
OBJECT-TYPE
The hardware address of the ethernet port of the RPM. This object may be blank if the device does not report its MAC address.
1.3.6.1.4.1.244.1.1.4.7.1.1.11OCTET STRINGread-onlycurrent
slcDevRPMNumOutlets
OBJECT-TYPE
The number of power outlets that the RPM has.
1.3.6.1.4.1.244.1.1.4.7.1.1.12Integer32 (0..120)read-onlycurrent
slcDevRPMOutletsOn
OBJECT-TYPE
The number of RPM outlets that are currently turned on. A negative value indicates that the RPM does not report how many outlets are turned on.
1.3.6.1.4.1.244.1.1.4.7.1.1.13Integer32 (-1..120)read-onlycurrent
slcDevRPMSNMPReadComm
OBJECT-TYPE
For SNMP managed RPMs, the SNMP read (get) community.
1.3.6.1.4.1.244.1.1.4.7.1.1.14OCTET STRING (SIZE(1..20))read-onlycurrent
slcDevRPMAdminLogin
OBJECT-TYPE
For serial or network managed RPMs, the administrator login.
1.3.6.1.4.1.244.1.1.4.7.1.1.15OCTET STRING (SIZE(1..20))read-onlycurrent
slcDevRPMLogStatus
OBJECT-TYPE
Indicates how frequently the status for the RPM is logged. A value of 0 indicates that logging is disabled.
1.3.6.1.4.1.244.1.1.4.7.1.1.16Integer32 (0..60)read-onlycurrent
slcDevRPMCriticalSNMPTraps
OBJECT-TYPE
If enabled, indicates that the slcEventRPMAction trap will be sent for critical events for the RPM.
1.3.6.1.4.1.244.1.1.4.7.1.1.17EnabledStateread-onlycurrent
slcDevRPMCriticalEmails
OBJECT-TYPE
An email address to send emails to for critical events for the RPM.
1.3.6.1.4.1.244.1.1.4.7.1.1.18OCTET STRINGread-onlycurrent
slcDevRPMProvidesSLCPower
OBJECT-TYPE
If enabled, indicates that the RPM provides power to the SLC.
1.3.6.1.4.1.244.1.1.4.7.1.1.19EnabledStateread-onlycurrent
slcDevRPMOnLowBattery
OBJECT-TYPE
Indicates the action taken when a UPS is on battery and reaches a 'low battery' state. Applies to UPS devices only.
1.3.6.1.4.1.244.1.1.4.7.1.1.20INTEGER {shutdownThisUPS(1), shutdownAllUPS(2), allowBatteryToFail(3), shutdownSLCUPS(4)}read-onlycurrent
slcDevRPMShutdownOrder
OBJECT-TYPE
If a UPS reaches a 'low battery' state and its slcDevRPMOnLowBattery setting is shutdownAllUPS, this indicates the order in which this RPM will be shutdown as all UPSes are shutdown. All UPSes with a shutdown order of '1' will be shutdown first, followed by all UPSes with a shutdown order of '2', etc. Shutdown orders are in the range of 1 to 49, with 50 being reserved for UPSes that provide power to the SLC - they will always be shutdown last. A value of 0 indicates that this UPS will not be shutdown. Applies to UPS devices only.
1.3.6.1.4.1.244.1.1.4.7.1.1.21Integer32 (0..50)read-onlycurrent
slcDevRPMLoad
OBJECT-TYPE
The current load of the RPM expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report load values.
1.3.6.1.4.1.244.1.1.4.7.1.1.22Integer32 (-1..1000)read-onlycurrent
slcDevRPMLoadOverThreshold
OBJECT-TYPE
The load when the RPM switches to an overload condition, expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report over load threshold values.
1.3.6.1.4.1.244.1.1.4.7.1.1.23Integer32 (-1..1000)read-onlycurrent
slcDevRPMBatteryCharge
OBJECT-TYPE
The current battery charge for the the RPM, expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report battery charge values.
1.3.6.1.4.1.244.1.1.4.7.1.1.24Integer32 (-1..1000)read-onlycurrent
slcDevRPMBatteryRuntime
OBJECT-TYPE
The number of seconds in the RPM remaining battery life. A value of 0 indicates that the RPM does not report battery runtime values.
1.3.6.1.4.1.244.1.1.4.7.1.1.25TimeTicksread-onlycurrent
slcDevRPMBeeperStatus
OBJECT-TYPE
If enabled, indicates that the RPM beeper is enabled. A value of 0 indicates that the RPM does not report beeper status.
1.3.6.1.4.1.244.1.1.4.7.1.1.26EnabledStateread-onlycurrent
slcDevRPMTemperature
OBJECT-TYPE
The internal temperature of the RPM, given in Celsius. A value of less than or equal to zero indicates that the RPM does not report temperature values.
1.3.6.1.4.1.244.1.1.4.7.1.1.27Integer32read-onlycurrent
slcDevRPMUptime
OBJECT-TYPE
The number of seconds the RPM has been up. A value of 0 indicates that the RPM does not report uptime values.
1.3.6.1.4.1.244.1.1.4.7.1.1.28TimeTicksread-onlycurrent
slcDevRPMStatusTable
OBJECT-TYPE
Table of RPM status entries.
1.3.6.1.4.1.244.1.1.4.7.2not-accessiblecurrent
slcDevRPMStatusEntry
OBJECT-TYPE
An entry containing status information for an RPM. The SLC supports up to two towers or units per RPM.
1.3.6.1.4.1.244.1.1.4.7.2.1not-accessiblecurrent
slcDevRPMCurrent
OBJECT-TYPE
The total current level, in tenths of Amps, for all outlets, on a given RPM tower or unit. If the value is negative, the RPM does not report current for the tower or unit.
1.3.6.1.4.1.244.1.1.4.7.2.1.1Integer32read-onlycurrent
slcDevRPMInputVoltage
OBJECT-TYPE
The input voltage, in tenths of Volts, on a given RPM tower or unit. If the value is negative, the RPM does not report input voltage for the tower or unit.
1.3.6.1.4.1.244.1.1.4.7.2.1.2Integer32read-onlycurrent
slcDevRPMApparentPower
OBJECT-TYPE
The apparent power, in tenths of Volt-Amps, on a given RPM tower or unit. If the value is negative, the RPM does not report apparent power for the tower or unit.
1.3.6.1.4.1.244.1.1.4.7.2.1.3Integer32read-onlycurrent
slcDevRPMNominalApparentPower
OBJECT-TYPE
The nominal apparent power, in tenths of Volt-Amps, on a given RPM tower or unit. If the value is negative, the RPM does not report nominal apparent power for the tower or unit.
1.3.6.1.4.1.244.1.1.4.7.2.1.4Integer32read-onlycurrent
slcDevRPMRealPower
OBJECT-TYPE
The real power, in tenths of Watts, on a given RPM tower or unit. If the value is negative, the RPM does not report real power for the tower or unit.
1.3.6.1.4.1.244.1.1.4.7.2.1.5Integer32read-onlycurrent
slcDevRPMNominalRealPower
OBJECT-TYPE
The nominal real power, in tenths of Watts, on a given RPM tower or unit. If the value is negative, the RPM does not report nominal real power for the tower or unit.
1.3.6.1.4.1.244.1.1.4.7.2.1.6Integer32read-onlycurrent
slcDevRPMOutletTable
OBJECT-TYPE
Table of RPM outlet status and control entries.
1.3.6.1.4.1.244.1.1.4.7.3not-accessiblecurrent
slcDevRPMOutletEntry
OBJECT-TYPE
An entry containing status and control for outlets on an RPM.
1.3.6.1.4.1.244.1.1.4.7.3.1not-accessiblecurrent
slcDevRPMOutletName
OBJECT-TYPE
The current name of the RPM outlet. This will be blank if the RPM device does not report outlet names.
1.3.6.1.4.1.244.1.1.4.7.3.1.1OCTET STRINGread-onlycurrent
slcDevRPMOutletState
OBJECT-TYPE
The current state of the RPM outlet.
1.3.6.1.4.1.244.1.1.4.7.3.1.2INTEGER {unknown(1), off(2), on(3)}read-onlycurrent
slcDevRPMOutletCurrent
OBJECT-TYPE
The current level, in tenths of Amps, for the RPM outlet. This will be negative if the RPM does not report current values for the outlet.
1.3.6.1.4.1.244.1.1.4.7.3.1.3Integer32read-onlycurrent
slcDevRPMOutletAction
OBJECT-TYPE
Performs an action to change the state of an outlet on an RPM. A read of this object always returns the value noAction(1). If the RPM supports individual outlet control, a command will be sent to the RPM to change the outlet state. Requests for invalid outlets or RPMs that do not support individual outlet control will return an error.
1.3.6.1.4.1.244.1.1.4.7.3.1.4INTEGER {noAction(1), turnOff(2), turnOn(3), cyclePower(4)}read-writecurrent
slcConnections
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.5
slcConnNumber
OBJECT-TYPE
The number of entries in the Connections table.
1.3.6.1.4.1.244.1.1.5.1Integer32read-onlycurrent
slcConnTable
OBJECT-TYPE
Table of connection entries. The number of entries is given by the value of slcConnNumber.
1.3.6.1.4.1.244.1.1.5.2not-accessiblecurrent
slcConnEntry
OBJECT-TYPE
An entry containing a connection.
1.3.6.1.4.1.244.1.1.5.2.1not-accessiblecurrent
slcConnIndex
OBJECT-TYPE
Reference index for each connection.
1.3.6.1.4.1.244.1.1.5.2.1.1Integer32 (1..512)read-onlycurrent
slcConnEndPt1
OBJECT-TYPE
A description of one of the end points of the connection.
1.3.6.1.4.1.244.1.1.5.2.1.2OCTET STRINGread-onlycurrent
slcConnEndPt2
OBJECT-TYPE
A description of one of the end points of the connection.
1.3.6.1.4.1.244.1.1.5.2.1.3OCTET STRINGread-onlycurrent
slcConnFlow
OBJECT-TYPE
The direction that data is flowing in the connection.
1.3.6.1.4.1.244.1.1.5.2.1.4INTEGER {bidirectional(1), endpt1toendpt2(2), endpt2toendpt1(3)}read-onlycurrent
slcConnUser
OBJECT-TYPE
The user that initiated the connection.
1.3.6.1.4.1.244.1.1.5.2.1.5OCTET STRING (SIZE(1..32))read-onlycurrent
slcConnDuration
OBJECT-TYPE
The duration, in seconds, that the connection has existed.
1.3.6.1.4.1.244.1.1.5.2.1.6Integer32read-onlycurrent
slcConnDurationStr
OBJECT-TYPE
The duration, formatted in hours:minutes:seconds, that the connection has existed.
1.3.6.1.4.1.244.1.1.5.2.1.7OCTET STRINGread-onlycurrent
slcConnIdle
OBJECT-TYPE
The amount of time that the connection has been idle, in seconds.
1.3.6.1.4.1.244.1.1.5.2.1.8Integer32read-onlycurrent
slcConnIdleStr
OBJECT-TYPE
The amount of time that the connection has been idle, formatted in hours:minutes:seconds.
1.3.6.1.4.1.244.1.1.5.2.1.9OCTET STRINGread-onlycurrent
slcConnSourceIP
OBJECT-TYPE
For network (Telnet and SSH) connections into the SLC, the source IP Address.
1.3.6.1.4.1.244.1.1.5.2.1.10IpAddressread-onlycurrent
slcSystem
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.6
slcSystemModel
OBJECT-TYPE
The model of the SLC: SLC8, SLC16, SLC32, SLC48, SLC8008, SLC8016, SLC8024, SLC8032, SLC8040, SLC8048.
1.3.6.1.4.1.244.1.1.6.1OCTET STRINGread-onlycurrent
slcSystemSerialNo
OBJECT-TYPE
The serial number of the SLC.
1.3.6.1.4.1.244.1.1.6.2OCTET STRINGread-onlycurrent
slcSystemFWRev
OBJECT-TYPE
The firmware version of the SLC.
1.3.6.1.4.1.244.1.1.6.3OCTET STRINGread-onlycurrent
slcSystemLoadVia
OBJECT-TYPE
The method used for firmware updates.
1.3.6.1.4.1.244.1.1.6.4INTEGER {ftp(1), tftp(2), sftp(3), slm(4), https(5), nfs(6), pccard(7)}read-onlycurrent
slcSystemFTPServer
OBJECT-TYPE
The IP Address of the FTP/TFTP server used for firmware updates, and for saving and restoring configurations.
1.3.6.1.4.1.244.1.1.6.5IpAddressread-onlycurrent
slcSystemFTPPath
OBJECT-TYPE
The path on the FTP server used for firmware updates, and for saving and restoring configurations.
1.3.6.1.4.1.244.1.1.6.6OCTET STRINGread-onlycurrent
slcSystemKeypadLock
OBJECT-TYPE
If enabled, the LCD keypad is locked for editing configuration. The keys can only be used to view settings.
1.3.6.1.4.1.244.1.1.6.7EnabledStateread-onlycurrent
slcSystemTimeZone
OBJECT-TYPE
The time zone of the SLC.
1.3.6.1.4.1.244.1.1.6.8OCTET STRINGread-onlycurrent
slcSystemWelcomeBanner
OBJECT-TYPE
The banner displayed before the login prompt.
1.3.6.1.4.1.244.1.1.6.9OCTET STRINGread-onlycurrent
slcSystemLoginBanner
OBJECT-TYPE
The banner displayed after successful login.
1.3.6.1.4.1.244.1.1.6.10OCTET STRINGread-onlycurrent
slcSystemLogoutBanner
OBJECT-TYPE
The banner displayed after logout.
1.3.6.1.4.1.244.1.1.6.11OCTET STRINGread-onlycurrent
slcSystemWebTimeout
OBJECT-TYPE
The timeout (in minutes) for web sessions. A value of 0 indicates that timeouts are disabled.
1.3.6.1.4.1.244.1.1.6.12Integer32 (0 | 5..120)read-onlycurrent
slcSystemWebGadget
OBJECT-TYPE
If enabled, iGoogle Gadget web content is enabled.
1.3.6.1.4.1.244.1.1.6.13EnabledStateread-onlycurrent
slcSystemAction
OBJECT-TYPE
Performs an action on the SLC. A read of this object always returns the value noAction(1). Setting this object to rebootSLC(2) will terminate all connections and reboot the SLC. Setting this object to shutdownSLC(3) will terminate all connections and shutdown the SLC so it can be powered off.
1.3.6.1.4.1.244.1.1.6.14INTEGER {noAction(1), rebootSLC(2), shutdownSLC(3)}read-writecurrent
slcSystemSSHPreAuthBanner
OBJECT-TYPE
The banner displayed prior to SSH authentication.
1.3.6.1.4.1.244.1.1.6.15OCTET STRINGread-onlycurrent
slcSystemSiteRackRow
OBJECT-TYPE
The identifier of the row of racks in a data center containing the SLC.
1.3.6.1.4.1.244.1.1.6.16Integer32 (1..999)read-onlycurrent
slcSystemSiteRackCluster
OBJECT-TYPE
The identifier of the group of racks in a given row (slcSystemSiteRackRow) containing the SLC.
1.3.6.1.4.1.244.1.1.6.17Integer32 (1..999)read-onlycurrent
slcSystemSiteRack
OBJECT-TYPE
The identifier of the rack in a given rack group (slcSystemSiteRackCluster) containing the SLC.
1.3.6.1.4.1.244.1.1.6.18Integer32 (1..999)read-onlycurrent
slcSystemLCDScreens
OBJECT-TYPE
A string describing the enabled LCD screens, in the order they are displayed. Each screen is separated by a comma. The possible screens are Current Time, Network, Console, Release, Date/Time, Device Ports, Location, Temperature and User Strings.
1.3.6.1.4.1.244.1.1.6.19OCTET STRINGread-onlycurrent
slcSystemLCDUserStrLine1
OBJECT-TYPE
For the LCD screen User Strings, this is the first line displayed on the LCD.
1.3.6.1.4.1.244.1.1.6.20OCTET STRINGread-onlycurrent
slcSystemLCDUserStrLine2
OBJECT-TYPE
For the LCD screen User Strings, this is the second line displayed on the LCD.
1.3.6.1.4.1.244.1.1.6.21OCTET STRINGread-onlycurrent
slcSystemLCDScrolling
OBJECT-TYPE
If enabled, the LCD automatically scrolls through the enabled screens.
1.3.6.1.4.1.244.1.1.6.22EnabledStateread-onlycurrent
slcSystemLCDScrollDelay
OBJECT-TYPE
If LCD scrolling is enabled (slcSystemLCDScrolling), the delay in seconds between displaying screens.
1.3.6.1.4.1.244.1.1.6.23Integer32 (1..60)read-onlycurrent
slcSystemLCDIdleDelay
OBJECT-TYPE
If LCD scrolling is enabled (slcSystemLCDScrolling), the number of seconds after keypad input before auto-scrolling restarts.
1.3.6.1.4.1.244.1.1.6.24Integer32 (5..60)read-onlycurrent
slcSystemInternalTemp
OBJECT-TYPE
The internal temperature of the SLC, given in Celsius. A value of 9999 is returned if an error is encountered reading the temperature.
1.3.6.1.4.1.244.1.1.6.25Integer32read-onlycurrent
slcSystemWebProtocol
OBJECT-TYPE
The protocol used by the web server. This setting is no longer available; the web server is configured to only support the TLS protocol.
1.3.6.1.4.1.244.1.1.6.26INTEGER {tlsv1SSLv3(1), tlsv1SSLv3SSLv2(2)}read-onlycurrent
slcSystemWebCipher
OBJECT-TYPE
The strength of the cipher used by the web server. A cipher with high strength uses 256, 168 or 128 bits; a cipher with medium strength uses 128 bits; a cipher with low strength uses 64 or 56 bits.
1.3.6.1.4.1.244.1.1.6.27INTEGER {highMedium(1), highMediumLow(2)}read-onlycurrent
slcSystemModelString
OBJECT-TYPE
A string that describes the SLC model: <Model>-<Power Supply>-<PCCard or USB>
1.3.6.1.4.1.244.1.1.6.28OCTET STRINGread-onlycurrent
slcSystemWebGroup
OBJECT-TYPE
The group or groups that may access the web.
1.3.6.1.4.1.244.1.1.6.29OCTET STRINGread-onlycurrent
slcSystemWebInterface
OBJECT-TYPE
A string describing the interfaces the web is available on; for example: Eth1,Eth2,PPP.
1.3.6.1.4.1.244.1.1.6.30OCTET STRINGread-onlycurrent
slcSystemWebBanner
OBJECT-TYPE
The banner on the web home page.
1.3.6.1.4.1.244.1.1.6.31OCTET STRINGread-onlycurrent
slcSystemInternalTempLow
OBJECT-TYPE
The minimum acceptable internal temperature for the SLC, in Celsius.
1.3.6.1.4.1.244.1.1.6.32Integer32read-onlycurrent
slcSystemInternalTempHigh
OBJECT-TYPE
The maximum acceptable internal temperature for the SLC, in Celsius.
1.3.6.1.4.1.244.1.1.6.33Integer32read-onlycurrent
slcSystemCalibrateTemp
OBJECT-TYPE
An offset in Celsius for calibrating the internal temperature of the SLC.
1.3.6.1.4.1.244.1.1.6.34Integer32read-onlycurrent
slcSystemWebServer
OBJECT-TYPE
If enabled, the web server will run and listen on TCP ports 80 and 443 (all requests to port 80 are redirected to port 443).
1.3.6.1.4.1.244.1.1.6.35EnabledStateread-onlycurrent
slcEventObjects
OBJECT-IDENTITY
1.3.6.1.4.1.244.1.1.7
slcPowerSupplyId
OBJECT-TYPE
The identifier of the power supply in a slcEventPowerSupply trap.
1.3.6.1.4.1.244.1.1.7.1INTEGER {powerSupplyA(1), powerSupplyB(2), primaryInlet(3), secondaryInlet(4)}read-onlycurrent
slcPowerSupplyAction
OBJECT-TYPE
The action that occurred for a power supply in a slcEventPowerSupply trap.
1.3.6.1.4.1.244.1.1.7.2INTEGER {powerSupplyFailed(1), powerSupplyRestored(2)}read-onlycurrent
slcDevPortNumBytes
OBJECT-TYPE
The number of bytes received on a Device Port to trigger a slcEventDevicePortData or slcEventDevicePortSLMData trap.
1.3.6.1.4.1.244.1.1.7.3Integer32read-onlycurrent
slcDevPortData
OBJECT-TYPE
The character data received on a Device Port to trigger a slcEventDevicePortData trap.
1.3.6.1.4.1.244.1.1.7.4OCTET STRINGread-onlycurrent
slcDevPortStartByte
OBJECT-TYPE
The starting byte within the logging buffer of data received on a Device Port, which triggered a slcEventDevicePortSLMData trap.
1.3.6.1.4.1.244.1.1.7.5Integer32read-onlycurrent
slcDevPortTimeFrame
OBJECT-TYPE
The time frame, in seconds, after which a slcEventDevicePortSLMData trap is sent to the SLM to trigger retrieval of Device Port data.
1.3.6.1.4.1.244.1.1.7.6Integer32read-onlycurrent
slcDevPortDeviceErrorStatus
OBJECT-TYPE
The status returned when an error occurs in a device connected to a Device Port.
1.3.6.1.4.1.244.1.1.7.7INTEGER {lowPower(1), damageOrTamper(2)}read-onlycurrent
slcHostname
OBJECT-TYPE
The hostname of the SLC sending the trap.
1.3.6.1.4.1.244.1.1.7.8OCTET STRINGread-onlycurrent
slcPCCardSlot
OBJECT-TYPE
The PC Card slot indicated for the trap.
1.3.6.1.4.1.244.1.1.7.9INTEGER {upperSlot(1), lowerSlot(2)}read-onlycurrent
slcPCCardAction
OBJECT-TYPE
The action that occurred on a PC Card slot.
1.3.6.1.4.1.244.1.1.7.10INTEGER {cardInserted(1), cardRemoved(2)}read-onlycurrent
slcPCCardType
OBJECT-TYPE
The type of card inserted in a PC Card slot.
1.3.6.1.4.1.244.1.1.7.11INTEGER {none(1), storage(2), modem(3), isdn(4), wireless(5), gsmmodem(6)}read-onlycurrent
slcUSBAction
OBJECT-TYPE
The action that occurred on a USB Port.
1.3.6.1.4.1.244.1.1.7.12INTEGER {deviceInserted(1), deviceRemoved(2), noModemDialTone(3)}read-onlycurrent
slcUSBType
OBJECT-TYPE
The type of device inserted in a USB Port.
1.3.6.1.4.1.244.1.1.7.13INTEGER {none(1), storage(2), modem(3), isdn(4), wireless(5), gsmmodem(6)}read-onlycurrent
slcDevPortErrorStatus
OBJECT-TYPE
The status returned when an error occurs in a Device Port. dataDrop applies to a specific Device Port and is sent when a Device Port is required to discard data in order to keep data moving for all connections to the Device Port. invalidIOConfiguration and errorIOModules apply to all Device Ports. invalidIOConfiguration is sent when the I/O modules installed in a SLC are in an invalid configuration. errorIOModules is sent when an error is detected in one or more I/O modules.
1.3.6.1.4.1.244.1.1.7.14INTEGER {dataDrop(1), invalidIOConfiguration(2), errorIOModules(3)}read-onlycurrent
slcSDCardAction
OBJECT-TYPE
The action that occurred on the SD Card slot.
1.3.6.1.4.1.244.1.1.7.15INTEGER {deviceInserted(1), deviceRemoved(2)}read-onlycurrent
slcRPMAction
OBJECT-TYPE
The action that occurred on a Remote Power Manager.
1.3.6.1.4.1.244.1.1.7.16OCTET STRINGread-onlycurrent
slcEventHost
OBJECT-TYPE
The name or IP address of a host in a SLC event.
1.3.6.1.4.1.244.1.1.7.17OCTET STRINGread-onlycurrent

Notifications

NameOIDStatus
slcEventPowerSupply
NOTIFICATION-TYPE
The SNMP trap that is generated when a power supply fails or is restored.
1.3.6.1.4.1.244.1.1.0.1current
slcEventSysadminPassword
NOTIFICATION-TYPE
The SNMP trap that is generated when the sysadmin user password is changed.
1.3.6.1.4.1.244.1.1.0.2current
slcEventSLCShutdown
NOTIFICATION-TYPE
The SNMP trap that is generated when the SLC is shutdown.
1.3.6.1.4.1.244.1.1.0.3current
slcEventDevicePortData
NOTIFICATION-TYPE
The SNMP trap that is generated when data is received on a Device Port, and the Device Port has been configured to generate a trap when a specified number of bytes (slcDevPortNumBytes) or a specified sequence of bytes (slcDevPortCfgEmailTextString) is received. slcDevPortData is the actual data received.
1.3.6.1.4.1.244.1.1.0.4current
slcEventDevicePortSLMData
NOTIFICATION-TYPE
The SNMP trap that is generated when data is received on a Device Port, and the Device Port has been configured to generate a trap designated for the Secure Lantronix Management Appliance (SLM) when a specified number of bytes is received or a specified time frame is passed. This trap is only sent to the SLM.
1.3.6.1.4.1.244.1.1.0.5current
slcEventDevicePortSLMConfig
NOTIFICATION-TYPE
The SNMP trap that is generated when the SLM logging configuration is changed for a Device Port, and the Device Port has been configured to generate a trap designated for the Secure Lantronix Management Appliance (SLM). This trap specifies the new SLM logging configuration for the Device Port, and is only sent to the SLM.
1.3.6.1.4.1.244.1.1.0.6current
slcEventDevicePortDeviceLowTemp
NOTIFICATION-TYPE
The SNMP trap that is generated when the low temperature limit for a sensor connected to a Device Port is exceeded.
1.3.6.1.4.1.244.1.1.0.7current
slcEventDevicePortDeviceHighTemp
NOTIFICATION-TYPE
The SNMP trap that is generated when the high temperature limit for a sensor connected to a Device Port is exceeded.
1.3.6.1.4.1.244.1.1.0.8current
slcEventDevicePortDeviceLowHumidity
NOTIFICATION-TYPE
The SNMP trap that is generated when the low humidity limit for a sensor connected to a Device Port is exceeded.
1.3.6.1.4.1.244.1.1.0.9current
slcEventDevicePortDeviceHighHumidity
NOTIFICATION-TYPE
The SNMP trap that is generated when the high humidity limit for a sensor connected to a Device Port is exceeded.
1.3.6.1.4.1.244.1.1.0.10current
slcEventDevicePortDeviceError
NOTIFICATION-TYPE
The SNMP trap that is generated when an error occurs on a device connected to a Device Port.
1.3.6.1.4.1.244.1.1.0.11current
slcEventPCCardAction
NOTIFICATION-TYPE
The SNMP trap that is generated when an event occurs on one of the PC Card slots.
1.3.6.1.4.1.244.1.1.0.12current
slcEventSLCInternalTemp
NOTIFICATION-TYPE
The SNMP trap that is generated when the internal temperature of the SLC is outside of the acceptable operating range.
1.3.6.1.4.1.244.1.1.0.13current
slcEventUSBAction
NOTIFICATION-TYPE
The SNMP trap that is generated when an event occurs on one of the USB Ports.
1.3.6.1.4.1.244.1.1.0.14current
slcEventDevicePortError
NOTIFICATION-TYPE
The SNMP trap that is generated when an error occurs on a a Device Port, or across all Device Ports. If an error occurs across all Device Ports, slcDevPortId will be 1 (one).
1.3.6.1.4.1.244.1.1.0.15current
slcEventSDCardAction
NOTIFICATION-TYPE
The SNMP trap that is generated when an event occurs on the SD Card slot.
1.3.6.1.4.1.244.1.1.0.16current
slcEventNoDialToneAlarm
NOTIFICATION-TYPE
The SNMP trap that is generated when an event indicates that a no-dial-tone condition on the internal modem exists.
1.3.6.1.4.1.244.1.1.0.17current
slcEventRPMAction
NOTIFICATION-TYPE
The SNMP trap that is generated when an event occurs on one of the Remote Power Manager (UPS or PDU) devices.
1.3.6.1.4.1.244.1.1.0.18current
slcEventPingHostFails
NOTIFICATION-TYPE
The SNMP trap that is generated when the SLC is monitoring a host with regular pings and the SLC is unable to ping the host. The trap includes either the name or the IP address of the failed host.
1.3.6.1.4.1.244.1.1.0.19current