LANOPTICS-RING-MANAGER-MIB
- Registered at
- 1.3.6.1.4.1.224.5
- Namespace
- cisco
- Source file
LANOPTICS-RING-MANAGER-MIB- Digest
sha256:7d17603145481759d2c01d716dfa12269d3948f6eefcf63ac2aebc03e2051c45
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
LANOPTICS-RING-MANAGER-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| BITMAP type | ||||
| RING_CONFIGURATION type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| lanOptics OBJECT-IDENTITY | 1.3.6.1.4.1.224 | |||
| lanOpticsDot5Monitor OBJECT-IDENTITY | 1.3.6.1.4.1.224.5 | |||
| rmServerReportingTo OBJECT-TYPE This gives the IP address for the reporting manager. | 1.3.6.1.4.1.224.5.1 | IpAddress | read-only | mandatory |
| rmRingStatus OBJECT-TYPE This variable indicates the curent ring status. | 1.3.6.1.4.1.224.5.2 | INTEGER {beaconing(1), single-station(2), errors-increasing(3), excessive-errors(4)} | read-only | mandatory |
| rmServerHealthText OBJECT-TYPE This variable describes the status of the ring server in a textural manner. | 1.3.6.1.4.1.224.5.3 | DisplayString | read-only | mandatory |
| rmServerHealth OBJECT-TYPE This variable will describe the status of the ring server. | 1.3.6.1.4.1.224.5.4 | INTEGER {initial-State(1), not-Active(2)} | read-only | mandatory |
| rmRingEventInLog OBJECT-TYPE The number of events currently in the internal event log. | 1.3.6.1.4.1.224.5.5 | INTEGER | read-only | mandatory |
| rmRingEventTable OBJECT-TYPE A table containing the last events. The detailed structure is TBD. | 1.3.6.1.4.1.224.5.6 | not-accessible | mandatory | |
| rmRingEventEntry OBJECT-TYPE An entry containing one event. The index into the table is the event number (32 bits int), where each byte represented by an index digit. | 1.3.6.1.4.1.224.5.6.1 | not-accessible | mandatory | |
| rmRingEvent OBJECT-TYPE This variable will give the data structure describing a ring event in an internal format | 1.3.6.1.4.1.224.5.6.1.1 | OCTET STRING | read-only | mandatory |
| pysmiFakeCol1012 OBJECT-TYPE | 1.3.6.1.4.1.224.5.6.1.1012 | INTEGER | ||
| pysmiFakeCol1013 OBJECT-TYPE | 1.3.6.1.4.1.224.5.6.1.1013 | INTEGER | ||
| pysmiFakeCol1014 OBJECT-TYPE | 1.3.6.1.4.1.224.5.6.1.1014 | INTEGER | ||
| pysmiFakeCol1015 OBJECT-TYPE | 1.3.6.1.4.1.224.5.6.1.1015 | INTEGER | ||
| rmRingBeaconingStatus OBJECT-TYPE This variable will give the data structure describing the beaconing state of the ring. | 1.3.6.1.4.1.224.5.7 | OCTET STRING | read-only | mandatory |
| rmRingIsoErrorStatus OBJECT-TYPE This variable will give the data structure describing the isolating error state of the ring. | 1.3.6.1.4.1.224.5.8 | OCTET STRING | read-only | mandatory |
| rmRingSingleStationStatus OBJECT-TYPE This variable will give the data structure describing the single station state of the ring. | 1.3.6.1.4.1.224.5.9 | OCTET STRING | read-only | mandatory |
| rmRingFullConfiguration OBJECT-TYPE This variable gives the ring configuration as known to the server. Each MAC address is represented by 6 bytes. The direction is up-stream. | 1.3.6.1.4.1.224.5.10 | RING_CONFIGURATION | read-only | mandatory |
| rmRingConfigurationUpdate OBJECT-TYPE This variable will give a sequence of changes in the ring configuration for the monitored ring. | 1.3.6.1.4.1.224.5.11 | RING_CONFIGURATION | read-only | mandatory |
| rmServerInitProcess OBJECT-TYPE This variable will initialize the server (reset the management module). | 1.3.6.1.4.1.224.5.12 | INTEGER | read-write | mandatory |
| rmServerAdminState OBJECT-TYPE This variable will indicate administrative status of the server. IDLE - 0 The bit # (LSB = 0): REM - bit 0 on CRS - bit 1 on RPS - bit 2 on LBS - bit 3 on | 1.3.6.1.4.1.224.5.13 | BITMAP | read-write | mandatory |
| rmServerOperatingState OBJECT-TYPE This variable will indicate operating status of the server: IDLE - all 0 The bit # (LSB = 0): REM - bit 0 on CRS - bit 1 on RPS - bit 2 on LBS - bit 3 on | 1.3.6.1.4.1.224.5.14 | BITMAP | read-only | mandatory |
| rmServerAdminParameters OBJECT-TYPE The required bit per event disabled/enabled. The bit # (LSB = 0): Nullevent(0), Nodenoresponseevent(1), Pollprocessfailevent(2), Criticnodejoinedringevent(3), Noderemovedevent(4), Activemonitorerrorevent(5), Newactivemonitorevent(6), Naunchangeevent(7), Claimtokenevent(8), Ringpurgeevent(9), Activemonitorpresentevent(10), Standbymonitorpresentevent(11), Softerrorreportevent(12), Ringstatusevent(13), Congestthresholdexccededevent(14), Congestthresholdendedevent(15), Nonisolatingthresholdexccededevent(16), Impendthresholdexccededevent(17), Excessivethresholdexcededevent(18), Errorratedecayevent(19), Adaptererrorevent(20), Responseevent(21), Pollprocessevent(22), Beaconevent(23), Nodeleftringevent(24), Nodejoinedringevent(25), Criticnodeleftringevent(26) | 1.3.6.1.4.1.224.5.15 | BITMAP | read-write | mandatory |
| rmServerOperatingParameters OBJECT-TYPE The required bit per event disabled/enabled. The bit # (LSB = 0): Nullevent(0), Nodenoresponseevent(1), Pollprocessfailevent(2), Criticnodejoinedringevent(3), Noderemovedevent(4), Activemonitorerrorevent(5), Newactivemonitorevent(6), Naunchangeevent(7), Claimtokenevent(8), Ringpurgeevent(9), Activemonitorpresentevent(10), Standbymonitorpresentevent(11), Softerrorreportevent(12), Ringstatusevent(13), Congestthresholdexccededevent(14), Congestthresholdendedevent(15), Nonisolatingthresholdexccededevent(16), Impendthresholdexccededevent(17), Excessivethresholdexcededevent(18), Errorratedecayevent(19), Adaptererrorevent(20), Responseevent(21), Pollprocessevent(22), Beaconevent(23), Nodeleftringevent(24), Nodejoinedringevent(25), Criticnodeleftringevent(26) | 1.3.6.1.4.1.224.5.16 | BITMAP | read-only | mandatory |
| rmDeviceStatusTable OBJECT-TYPE A table containing device parameters and configuration. | 1.3.6.1.4.1.224.5.17 | not-accessible | mandatory | |
| rmDeviceEntry OBJECT-TYPE An entry containing device parameters and configuration. The index to the table is the MAC address of the device. | 1.3.6.1.4.1.224.5.17.1 | not-accessible | mandatory | |
| rmDeviceMacAddress OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.1 | PhysAddress | read-only | mandatory |
| rmDeviceUpstream OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.2 | PhysAddress | read-only | mandatory |
| rmDeviceAdminState OBJECT-TYPE The required state of the adapter. - only removed is supported. | 1.3.6.1.4.1.224.5.17.1.3 | INTEGER {removed(4)} | read-write | mandatory |
| rmDeviceOperateState OBJECT-TYPE The operating state of the adapter. | 1.3.6.1.4.1.224.5.17.1.4 | INTEGER {open(1), closed(2), removed(4), neverInserted(8)} | read-only | mandatory |
| rmDevicePhysLocation OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.5 | INTEGER | read-only | mandatory |
| rmDeviceGroupAddress OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.6 | INTEGER | read-only | mandatory |
| rmDeviceFunctionAddress OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.7 | INTEGER | read-only | mandatory |
| rmDeviceProductID OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.8 | OCTET STRING | read-only | mandatory |
| rmDeviceStationID OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.9 | INTEGER | read-only | mandatory |
| rmDeviceStationStatus OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.10 | OCTET STRING | read-only | mandatory |
| rmDeviceFunctionClass OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.11 | INTEGER | read-only | mandatory |
| rmDeviceAccessPriority OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.12 | INTEGER | read-only | mandatory |
| rmDeviceMicroLevel OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.13 | OCTET STRING | read-only | mandatory |
| rmDeviceMonitored OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.14 | INTEGER | read-only | mandatory |
| rmDeviceDaysAllowed OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.15 | INTEGER | read-only | mandatory |
| rmDeviceHoursAllowed OBJECT-TYPE | 1.3.6.1.4.1.224.5.17.1.16 | INTEGER | read-only | mandatory |
| rmRingPollProcessStatus OBJECT-TYPE This variable will give the data structure describing the poll process status of the ring. | 1.3.6.1.4.1.224.5.18 | OCTET STRING | read-only | mandatory |
| rmRingNumber OBJECT-TYPE This variable will give the local ring number. | 1.3.6.1.4.1.224.5.35 | INTEGER | read-only | mandatory |
| rmRingSoftErrorTimer OBJECT-TYPE This variable will give the ring soft error timer (in units of 10 milliseconds). | 1.3.6.1.4.1.224.5.36 | INTEGER | read-only | mandatory |
| rmRingIsolatingTab OBJECT-TYPE This variable will give the ring isolating table. | 1.3.6.1.4.1.224.5.37 | OCTET STRING | read-only | mandatory |
| rmRingCongestTab OBJECT-TYPE This variable will give the ring congestion table. | 1.3.6.1.4.1.224.5.38 | OCTET STRING | read-only | mandatory |
| rmRingNonIsolatingTab OBJECT-TYPE This variable will give the ring non isolating table. | 1.3.6.1.4.1.224.5.39 | OCTET STRING | read-only | mandatory |
| rmRingAutoRemove OBJECT-TYPE This variable will enable/disable auto removal of a node when the isolating threshold is exceeded or the congestion threshold is exceeded. | 1.3.6.1.4.1.224.5.42 | INTEGER | read-write | mandatory |
| rmRingAllowedDaysPartition1 OBJECT-TYPE This variable is the first partition in the days time exis. The partitions define ranges in units of days in which some device are allowed to enter the ring and some are not. | 1.3.6.1.4.1.224.5.43 | INTEGER (1..7) | read-write | mandatory |
| rmRingAllowedDaysPartition2 OBJECT-TYPE This variable is the second partition in the days time exis. The partitions define ranges in units of days in which some devices are allowed to enter the ring and some are not. The value should be higher than Partition1 | 1.3.6.1.4.1.224.5.44 | INTEGER (1..7) | read-write | mandatory |
| rmRingAllowedHoursPartition1 OBJECT-TYPE This variable is the first partition in the hours time exis. The partitions define ranges in units of hours (1-24 hours) in which some devices are allowed to enter the ring and some are not. | 1.3.6.1.4.1.224.5.45 | INTEGER (1..24) | read-write | mandatory |
| rmRingAllowedHoursPartition2 OBJECT-TYPE This variable is the second partition in the hours time exis. The partitions define ranges in units of hours (1-24 hours) in which some devices are allowed to enter the ring and some are not. The value should be higher than Partition1. | 1.3.6.1.4.1.224.5.46 | INTEGER (1..24) | read-write | mandatory |
| rmServerPowerOn OBJECT-TYPE This variable indicates if the server is powered on since the last poll. | 1.3.6.1.4.1.224.5.47 | INTEGER | read-write | mandatory |
| rmTRLastErrorClass OBJECT-TYPE This var contains the error class of the last Token-Ring error reported by the agent. | 1.3.6.1.4.1.224.5.48 | INTEGER {adapter-error(1), beaconing(2), iso-increasing(3), iso-excessive(4), iso-decay(5), congestion(6)} | read-only | mandatory |
| rmTRLastErrorType OBJECT-TYPE This var contains the error type of the last Token-Ring error, depending on the error class | 1.3.6.1.4.1.224.5.49 | INTEGER | read-only | mandatory |
| rmTRFaultDomainNode1 OBJECT-TYPE This var contains the MAC address of the first node in the last error fault domain. | 1.3.6.1.4.1.224.5.50 | PhysAddress | read-only | mandatory |
| rmTRFaultDomainNode2 OBJECT-TYPE This var contains the MAC address of the second node in the last error fault domain. | 1.3.6.1.4.1.224.5.51 | PhysAddress | read-only | mandatory |
| rmIsoTresholdExceededCount OBJECT-TYPE This var counts the total number that Isloating Treshold has been exceeded (exessive error status of the ring) since the agent is up or reset. | 1.3.6.1.4.1.224.5.52 | Counter | read-only | mandatory |
| rmNonIsoTresholdExceededCount OBJECT-TYPE This var counts the total number that Non Isloating Treshold has been exceeded since the agent is up. | 1.3.6.1.4.1.224.5.53 | Counter | read-only | mandatory |
| rmCongestionTresholdExceededCount OBJECT-TYPE This var counts the total number that Congestion Treshold has been exceeded since the agent is up. | 1.3.6.1.4.1.224.5.54 | Counter | read-only | mandatory |
| rmBeaconCounter OBJECT-TYPE This var counts the total number of Beacons for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.55 | Counter | read-only | mandatory |
| rmSpareCounter OBJECT-TYPE Spare Counter for future use | 1.3.6.1.4.1.224.5.56 | Counter | read-only | mandatory |
| rmPurgeCounter OBJECT-TYPE This var counts the total number of ring Purges since the agent is up. | 1.3.6.1.4.1.224.5.57 | Counter | read-only | mandatory |
| rmClaimCounter OBJECT-TYPE This var counts the total number of Token Claims since the agent is up. | 1.3.6.1.4.1.224.5.58 | Counter | read-only | mandatory |
| rmAdapterResetCounter OBJECT-TYPE This var counts the total number of times the agent adapter has to reset itself since the agent is up. | 1.3.6.1.4.1.224.5.59 | Counter | read-only | mandatory |
| rmLostFramesCounter OBJECT-TYPE This var counts the total number of Lost Frames events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.60 | Counter | read-only | mandatory |
| rmCongestionCounter OBJECT-TYPE This var counts the total number of Congestion events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.61 | Counter | read-only | mandatory |
| rmFrameCopyCounter OBJECT-TYPE This var counts the total number of Frame Copy events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.62 | Counter | read-only | mandatory |
| rmFrequencyErrorCounter OBJECT-TYPE This var counts the total number of Frequency Error events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.63 | Counter | read-only | mandatory |
| rmTokenCounter OBJECT-TYPE This var counts the total number of Token error events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.64 | Counter | read-only | mandatory |
| rmLineCounter OBJECT-TYPE This var counts the total number of Line error events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.65 | Counter | read-only | mandatory |
| rmInternalCounter OBJECT-TYPE This var counts the total number of Internal error events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.66 | Counter | read-only | mandatory |
| rmBurstCounter OBJECT-TYPE This var counts the total number of Burst error events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.67 | Counter | read-only | mandatory |
| rmARIFCICounter OBJECT-TYPE This var counts the total number of ARI/FCI events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.68 | Counter | read-only | mandatory |
| rmAbortCounter OBJECT-TYPE This var counts the total number of Abort events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.69 | Counter | read-only | mandatory |
| rmPollFailCounter OBJECT-TYPE This var counts the total number of Poll Failed events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.70 | Counter | read-only | mandatory |
| rmNoResponseCounter OBJECT-TYPE This var counts the total number of No Response events for the whole ring since the agent is up. | 1.3.6.1.4.1.224.5.71 | Counter | read-only | mandatory |
| rmWholeRingCounters OBJECT-TYPE This var counts a list of all the above counters (52-71) for convenience. Each counter occupies 32 bits of this structure in the order of the related variables. For internal use only. | 1.3.6.1.4.1.224.5.72 | OCTET STRING | read-only | mandatory |
| rmResetOldDevicesSetup OBJECT-TYPE This var resets existing agent setup for all devices, e.g: monitored, not-allowed, etc. | 1.3.6.1.4.1.224.5.73 | INTEGER | read-write | mandatory |
| rmResetErrorCounters OBJECT-TYPE This var resets existing agent error counters. | 1.3.6.1.4.1.224.5.74 | INTEGER | read-write | mandatory |
| rmSetCurrentTime OBJECT-TYPE This var sets the current time (for security settings). The time is the number of seconds elapsed since midnight, December 31, 1899. | 1.3.6.1.4.1.224.5.75 | INTEGER | read-write | mandatory |
| rmRingFirstSplitConfiguration OBJECT-TYPE This variable will give the first part of the ring configuration upto 256 bytes including header (for agents with limited buffer for a single octet). Retrieving this variable and several 'nexts' enables to compose the whole ring configuration. | 1.3.6.1.4.1.224.5.76 | RING_CONFIGURATION | read-only | mandatory |
| rmRingNextSplitConfiguration OBJECT-TYPE This variable will give the next part of the ring configuration relating to rmRingFirstSplitConfiguration or previous variable of this type. Upto 256 bytes are given (for agents with limited buffer for a single octet). See previous variable for more details. | 1.3.6.1.4.1.224.5.77 | RING_CONFIGURATION | read-only | mandatory |