LAN-EMULATION-BUS-MIB
- Registered at
- 1.3.6.1.4.1.353.5.3.4
- Namespace
- standard
- Source file
LAN-EMULATION-BUS-MIB- Digest
sha256:f47e2193b00dec3d4ae148c53c7e2c82ab51f841e5bbeaf4bba9d209cae18613
Imports
| From | Symbols |
|---|---|
| LAN-EMULATION-CLIENT-MIB | VciInteger, VpiInteger, atmfLanEmulation |
| LAN-EMULATION-ELAN-MIB | AtmLaneMask, IfIndexOrZero, Integer, TIMESTAMP |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB LAN-EMULATION-BUS-MIB LAN-EMULATION-CLIENT-MIB LAN-EMULATION-ELAN-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AtmLaneAddress type | ||||
| RowStatus type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| busMIB OBJECT-IDENTITY | 1.3.6.1.4.1.353.5.3.4 | |||
| busConfGroup OBJECT-IDENTITY | 1.3.6.1.4.1.353.5.3.4.1 | |||
| busConfNextId OBJECT-TYPE The next available BUS index. The value of this object can be used as the index by the network manager to create an entry in the busConfTable. | 1.3.6.1.4.1.353.5.3.4.1.1 | INTEGER | read-only | mandatory |
| busConfTable OBJECT-TYPE This table contains all LAN Emulation Broadcast and Unknown Servers (BUS) this agent manages. The BUS handles data sent by an LE Client to the broadcast MAC address, all multicast traffic, and initial unicast frames which are sent by a LEC before the data direct target ATM address has been resolved. There can be multiple BUSs per ELAN, but a BUS can service only one ELAN. | 1.3.6.1.4.1.353.5.3.4.1.2 | not-accessible | mandatory | |
| busConfEntry OBJECT-TYPE Each entry in this table represents a BUS. The parameters in each entry apply to one emulated LAN served by one BUS. Object busRowStatus is required during row creation and deletion. Object busElanName is used to indicate the ELAN this BUS is servicing and is used to cross reference tables defined in the LAN Emulation Server MIB. Note that objects busAtmAddrSpec and busAtmAddrMask are used to configure the ATM address of a BUS. The BUS typically derives it's ATM address from the switch or the network and the actual ATM address used is indicated in the object busAtmAddrActual. | 1.3.6.1.4.1.353.5.3.4.1.2.1 | not-accessible | mandatory | |
| busConfIndex OBJECT-TYPE A value which uniquely identifies a conceptual row in the busConfTable. If the conceptual row identified by this value of busConfIndex is recreated following an agent restart, the same value of busConfIndex must be used to identify the recreated row. | 1.3.6.1.4.1.353.5.3.4.1.2.1.1 | INTEGER | not-accessible | mandatory |
| busConfAtmAddrSpec OBJECT-TYPE An ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the BUS on the designated ATM interface will use to derive the actual ATM address from the network or ILMI. The derived ATM address is specified in the object busAtmAddrActual, which is used to receive multicast or broadcast traffic. | 1.3.6.1.4.1.353.5.3.4.1.2.1.2 | AtmLaneAddress | read-write | mandatory |
| busConfAtmAddrMask OBJECT-TYPE The ATM address mask associated with the object busAtmAddrSpec. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one. | 1.3.6.1.4.1.353.5.3.4.1.2.1.3 | AtmLaneMask | read-write | mandatory |
| busConfAtmAddrActual OBJECT-TYPE The resultant ATM address in use by the BUS. This object is a product of the specified ATM address, mask and interaction with the network. This object is created by the agent. | 1.3.6.1.4.1.353.5.3.4.1.2.1.4 | AtmLaneAddress | read-only | mandatory |
| busConfElanName OBJECT-TYPE The name of the ELAN this BUS is providing service to. | 1.3.6.1.4.1.353.5.3.4.1.2.1.5 | DisplayString (SIZE(0..32)) | read-write | mandatory |
| busConfLastChange OBJECT-TYPE The value of the sysUpTime when this BUS has entered the state indicated by the object busConfOperStatus. | 1.3.6.1.4.1.353.5.3.4.1.2.1.6 | TIMESTAMP | read-only | mandatory |
| busConfMaxFrameAge OBJECT-TYPE Time out period for a frame that has been received but not been transmitted by BUS to all relevant Multicast Send VCCs or Multicast Forward VCCs. | 1.3.6.1.4.1.353.5.3.4.1.2.1.7 | INTEGER (1..4) | read-write | mandatory |
| busConfOperStatus OBJECT-TYPE The operational state of this BUS entry. When in 'up' state the BUS will forward LEC traffic. Any other state the BUS is not available for service and may release all the existing VCCs and refuse service to all clients. | 1.3.6.1.4.1.353.5.3.4.1.2.1.8 | INTEGER {other(1), up(2), down(3)} | read-only | mandatory |
| busConfAdminStatus OBJECT-TYPE The desired state of the designated BUS as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the busOperStatus. | 1.3.6.1.4.1.353.5.3.4.1.2.1.9 | INTEGER {up(2), down(3)} | read-write | mandatory |
| busConfRowStatus OBJECT-TYPE This object is used to create or delete entries in the busConfTable. | 1.3.6.1.4.1.353.5.3.4.1.2.1.10 | RowStatus | read-write | mandatory |
| busVccTable OBJECT-TYPE This table contains all the Multicast Forward VCCs used by the BUS to forward multicast traffic to the participating LECs. The Multicast Forward VCC can either be point-to-point or point-to- multipoint calls. This table is read only if SVCs are used and writable if PVCs are used. | 1.3.6.1.4.1.353.5.3.4.1.3 | not-accessible | mandatory | |
| busVccEntry OBJECT-TYPE Each entry in this table represents a Multicast Forward VCC of the BUS. | 1.3.6.1.4.1.353.5.3.4.1.3.1 | not-accessible | mandatory | |
| busVccAtmIfIndex OBJECT-TYPE The ATM interface which the Multicast Forward VCC is running on. This value must match an existing value in the ifTable. The value of this object is set to zero when the ATM interface is undefined. | 1.3.6.1.4.1.353.5.3.4.1.3.1.1 | IfIndexOrZero | not-accessible | mandatory |
| busVccMtFwdVpi OBJECT-TYPE The VPI value of the Multicast Forward VCC. The object busVccAtmIfIndex, busVccMtFwdVci and the value of this object uniquely identfies a VCC within a ATM host. | 1.3.6.1.4.1.353.5.3.4.1.3.1.2 | VpiInteger | not-accessible | mandatory |
| busVccMtFwdVci OBJECT-TYPE The VCI value of the Multicast Forward VCC. The object busVccAtmIfIndex, busVccMtFwdVpi and the value of this object uniquely identfies a VCC within a ATM host. | 1.3.6.1.4.1.353.5.3.4.1.3.1.3 | VciInteger | not-accessible | mandatory |
| busVccRowStatus OBJECT-TYPE This object is used to create or delete entries in the busConfTable. | 1.3.6.1.4.1.353.5.3.4.1.3.1.4 | RowStatus | read-write | mandatory |
| busLecTableLastChange OBJECT-TYPE The value of sysUpTime when an entry of the busLecTable was created/deleted. | 1.3.6.1.4.1.353.5.3.4.1.4 | TIMESTAMP | read-only | mandatory |
| busLecTable OBJECT-TYPE This table contains the BUS and the actual LECs being serviced by the BUS. It can be used as the actual mapping between BUS and LEC. This table provides information for Multicast send VCCs between BUS and clients. Objects busLecMcastSendAtmIfIndex, busLecMcastSendVpi, and busLecMcstSendVci can only be modified if PVC is used. | 1.3.6.1.4.1.353.5.3.4.1.5 | not-accessible | mandatory | |
| busLecEntry OBJECT-TYPE Each entry represents a BUS to LEC mapping. | 1.3.6.1.4.1.353.5.3.4.1.5.1 | not-accessible | mandatory | |
| busLecAtmAddr OBJECT-TYPE The ATM address of the LEC. This is the primary ATM address of the LEC. | 1.3.6.1.4.1.353.5.3.4.1.5.1.1 | AtmLaneAddress | not-accessible | mandatory |
| busLecMcastSendAtmIfIndex OBJECT-TYPE The ATM interface index this BUS uses for Multicast Send traffic. The value of this object has to exist in the ifTable in MIB II unless an internal connection is used. When an internal connection is used, this object is set to zero. | 1.3.6.1.4.1.353.5.3.4.1.5.1.2 | IfIndexOrZero | read-write | mandatory |
| busLecMcastSendVpi OBJECT-TYPE The virtual path identifier used to receive multicast traffic by this BUS. | 1.3.6.1.4.1.353.5.3.4.1.5.1.4 | VpiInteger | read-write | mandatory |
| busLecMcastSendVci OBJECT-TYPE The virtual channel identifier used to receive multicast traffic by this BUS. | 1.3.6.1.4.1.353.5.3.4.1.5.1.5 | VciInteger | read-write | mandatory |
| busLecRowStatus OBJECT-TYPE This object provides a way for the network manager to selectively remove a LE Client from the designated BUS. Or in a system where PVCs are used, this table is used to create Multicast Send VCCs between BUS and LEC. | 1.3.6.1.4.1.353.5.3.4.1.5.1.6 | RowStatus | read-write | mandatory |
| busStatGroup OBJECT-IDENTITY | 1.3.6.1.4.1.353.5.3.4.2 | |||
| busStatTable OBJECT-TYPE This table contains all counters the BUS maintain. This table is an extention to the busConfTable. | 1.3.6.1.4.1.353.5.3.4.2.1 | not-accessible | mandatory | |
| busStatEntry OBJECT-TYPE Each entry in this table contains a BUS and its counters. | 1.3.6.1.4.1.353.5.3.4.2.1.1 | not-accessible | mandatory | |
| busStatInDiscards OBJECT-TYPE The number of frames discarded due to resource error. | 1.3.6.1.4.1.353.5.3.4.2.1.1.1 | Counter | read-only | mandatory |
| busStatInOctets OBJECT-TYPE The number of octets that this BUS has received since its initialization. | 1.3.6.1.4.1.353.5.3.4.2.1.1.2 | Counter | read-only | mandatory |
| busStatInUcastFrms OBJECT-TYPE The number of frames that the BUS has received which were unicast data frames and all control frames (i.e. they were flooded from the client). | 1.3.6.1.4.1.353.5.3.4.2.1.1.3 | Counter | read-only | mandatory |
| busStatInMcastFrms OBJECT-TYPE The number of frames that the BUS has received which were multicast frames. | 1.3.6.1.4.1.353.5.3.4.2.1.1.4 | Counter | read-only | mandatory |
| busStatFrmTimeOuts OBJECT-TYPE The number of frames dropped by the BUS due to time out. | 1.3.6.1.4.1.353.5.3.4.2.1.1.5 | Counter | read-only | mandatory |
| busStatMcastSendRefused OBJECT-TYPE The number of multicast send VCCconnection setup attempts to the BUS which were refused. | 1.3.6.1.4.1.353.5.3.4.2.1.1.6 | Counter | read-only | mandatory |
| busStatMcastFwdFailure OBJECT-TYPE The number of multicast forward VCCconnection setup attempts from the BUS which were unsuccessful for any reason. | 1.3.6.1.4.1.353.5.3.4.2.1.1.7 | Counter | read-only | mandatory |
| busLecStatTable OBJECT-TYPE This table contains all LEC counters the BUS maintains. This table can also be used to retrieve all LECs a BUS is providing service to. | 1.3.6.1.4.1.353.5.3.4.2.2 | not-accessible | mandatory | |
| busLecStatEntry OBJECT-TYPE Each entry in this table represents a LEC and its counters. | 1.3.6.1.4.1.353.5.3.4.2.2.1 | not-accessible | mandatory | |
| busLecRecvs OBJECT-TYPE Number of Multicast, Broadcast and Unknown Forward requests received by the BUS from this LEC. | 1.3.6.1.4.1.353.5.3.4.2.2.1.1 | Counter | read-only | mandatory |
| busLecForwards OBJECT-TYPE Number of Multicast, Broadcast and Unkown Forward requests forwarded by the BUS from this LEC. The value of this object indicate how many requests have been forwarded by the BUS. | 1.3.6.1.4.1.353.5.3.4.2.2.1.2 | Counter | read-only | mandatory |
| busLecDiscards OBJECT-TYPE Number of Multicast, Broadcast and Unkown Forward requests discarded by the BUS from this LEC. The value of this object indicate how many requests have been discarded by the BUS. | 1.3.6.1.4.1.353.5.3.4.2.2.1.3 | Counter | read-only | mandatory |
| busFaultGroup OBJECT-IDENTITY | 1.3.6.1.4.1.353.5.3.4.3 | |||
| busErrCtlTable OBJECT-TYPE This table contains error log control information of all BUS instances. This table is an extention to the busConfTable. It is used to enable or disable error logs for a particular BUS entry. | 1.3.6.1.4.1.353.5.3.4.3.1 | not-accessible | mandatory | |
| busErrCtlEntry OBJECT-TYPE Each entry represents a BUS entry in the busConfTable. | 1.3.6.1.4.1.353.5.3.4.3.1.1 | not-accessible | mandatory | |
| busErrCtlAdminStatus OBJECT-TYPE This object is used to enable/disable error logging for the BUS. | 1.3.6.1.4.1.353.5.3.4.3.1.1.1 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| busErrCtlOperStatus OBJECT-TYPE This object is used to indicate the result of a set operation to the object busErrCtlAdminStatus. If the error log was successfully started, it is in active(2) mode. Otherwise, it is set to either outOfRes(3) or failed(4) for the respective reasons. | 1.3.6.1.4.1.353.5.3.4.3.1.1.2 | INTEGER {other(1), active(2), outOfRes(3), failed(4), disabled(5)} | read-only | mandatory |
| busErrCtlClearLog OBJECT-TYPE This object is used to clear the error log entries associated with this BUS. | 1.3.6.1.4.1.353.5.3.4.3.1.1.3 | INTEGER {noOp(1), clear(2)} | read-write | mandatory |
| busErrCtlMaxEntries OBJECT-TYPE The maximum entries of the error log a BUS can support. | 1.3.6.1.4.1.353.5.3.4.3.1.1.4 | INTEGER (1..65535) | read-only | mandatory |
| busErrCtlLastEntry OBJECT-TYPE The index to the last entry in the error log table for this BUS. | 1.3.6.1.4.1.353.5.3.4.3.1.1.5 | INTEGER (1..2147483647) | read-write | mandatory |
| busErrLogTable OBJECT-TYPE This table contains error logs of the BUS instances enabled in the busErrCtlTable. This table is indexed by the BUS instance index and an arbitrary integer uniquely identifies an error log. | 1.3.6.1.4.1.353.5.3.4.3.2 | not-accessible | mandatory | |
| busErrLogEntry OBJECT-TYPE Each entry represents aan error detected by the BUS. | 1.3.6.1.4.1.353.5.3.4.3.2.1 | not-accessible | mandatory | |
| busErrLogIndex OBJECT-TYPE An arbitrary integer which uniquely identifies an error log entry. The first entry after reset or clearing the error log is an assigned value (2^32-1). Succeding entries are assigned with descending values consecutively. Entries after 1 are discarded.The enabling/disabling of the error log capability is done in the busErrCtlTable. | 1.3.6.1.4.1.353.5.3.4.3.2.1.1 | INTEGER (1..2147483647) | not-accessible | mandatory |
| busErrLogAtmAddr OBJECT-TYPE The primary ATM address of the LE Client on whose Multicast Send VCC the error occured. The corresponding error code is specified in the object busErrLogErrCode. | 1.3.6.1.4.1.353.5.3.4.3.2.1.2 | AtmLaneAddress | read-only | mandatory |
| busErrLogErrCode OBJECT-TYPE The Error code which indicates the cause of the error. | 1.3.6.1.4.1.353.5.3.4.3.2.1.3 | INTEGER {outOfRes(1), badCtlFrame(2), badDataFrame(3), other(4)} | read-only | mandatory |
| busErrLogTime OBJECT-TYPE The sysUpTime when this entry was logged by the BUS. | 1.3.6.1.4.1.353.5.3.4.3.2.1.4 | TIMESTAMP | read-only | mandatory |