Juniper-SLEP-MIB
- Registered at
- 1.3.6.1.4.1.4874.2.2.15
- Last updated
- 2002-09-16 21:44
- Organization
- Juniper Networks, Inc.
- Revisions
- 2002-09-16 21:44, 2001-04-03 19:10, 2000-01-03 00:00
- Namespace
- juniper
- Source file
Juniper-SLEP-MIB- Digest
sha256:44116fd339899fb80e42e41bc464e34d0b5a2678594b5b6177f9d882494f6782
Description
The Serial Line Encapulation Protocol (SLEP) MIB for the Juniper Networks enterprise.
Contact
Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 E-mail: mib@Juniper.net
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable, JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB Juniper-MIBs Juniper-SLEP-MIB Juniper-TC Juniper-UNI-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| juniSlepObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.15.1 | |||
| juniSlepIfLayer OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.15.1.1 | |||
| juniSlepNextIfIndex OBJECT-TYPE Coordinate ifIndex value allocation for entries in juniSlepIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | 1.3.6.1.4.1.4874.2.2.15.1.1.1 | JuniNextIfIndex | read-only | current |
| juniSlepIfTable OBJECT-TYPE The parameters for the SLEP service on this interface. | 1.3.6.1.4.1.4874.2.2.15.1.1.2 | not-accessible | current | |
| juniSlepIfEntry OBJECT-TYPE The Parameters for a particular SLEP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1 | not-accessible | current | |
| juniSlepIfIndex OBJECT-TYPE The ifIndex value of the corresponding ifEntry. | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.1 | InterfaceIndex | not-accessible | current |
| juniSlepKeepAliveTimer OBJECT-TYPE The interface keep alive timer for this entry. The time in seconds that this entity will wait for sending a keep-alive-message to the remote SLEP entity, and the time in seconds that this entity will wait for the reception of a keep-alive-message from the remote SLEP entity. | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.2 | INTEGER (0..6553) | read-create | current |
| juniSlepIfLowerIfIndex OBJECT-TYPE The ifIndex of an interface over which this SLEP interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation. | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.3 | InterfaceIndexOrZero | read-create | current |
| juniSlepIfRowStatus OBJECT-TYPE Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniSlepIfRowStatus juniSlepIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniSlepIfIndex must have been determined previously, by reading juniSlepNextIfIndex. The interface identified by juniSlepIfLowerIfIndex must exist, and must be an interface type that permits layering of SLEP Interface above it. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table. | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.4 | RowStatus | read-create | current |
| juniSlepDownWhenLooped OBJECT-TYPE The down-when-looped control for this entry. This attribute determines if loop detection is enabled for the interface. If set to disable, loop detection is disabled for the interface. | 1.3.6.1.4.1.4874.2.2.15.1.1.2.1.5 | JuniEnable | read-create | current |
| juniSlepIfStatisticsTable OBJECT-TYPE The statistics for the SLEP service on this interface. | 1.3.6.1.4.1.4874.2.2.15.1.1.3 | not-accessible | current | |
| juniSlepIfStatisticsEntry OBJECT-TYPE The statistics for a particular SLEP interface. | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1 | not-accessible | current | |
| juniSlepIfStatsIndex OBJECT-TYPE The ifIndex value of that identifies this entry. | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.1 | InterfaceIndex | not-accessible | current |
| juniSlepKeepAliveFailures OBJECT-TYPE The number of link drops due to keep-alive failures. | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.2 | Counter32 | read-only | current |
| juniSlepLinkStatusTooLongPackets OBJECT-TYPE The number of packets that were too long for this SLEP entity. | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3 | Counter32 | read-only | current |
| juniSlepLinkStatusBadFCSs OBJECT-TYPE The number of FCS's errors for this SLEP entity. | 1.3.6.1.4.1.4874.2.2.15.1.1.3.1.4 | Counter32 | read-only | current |
| juniSlepConformance OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.15.4 | |||
| juniSlepCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.15.4.1 | |||
| juniSlepGroups OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.15.4.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| juniSlepCompliance MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper SLEP MIB. This compliance statement became obsolete when the juniSlepDownWhenLooped object was added. | 1.3.6.1.4.1.4874.2.2.15.4.1.1 | obsolete |
| juniSlepCompliance2 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper SLEP MIB. | 1.3.6.1.4.1.4874.2.2.15.4.1.2 | current |
| juniSlepGroup OBJECT-GROUP Obsolete collection of objects providing management of SLEP interfaces in a Juniper product. This group became obsolete when the juniSlepDownWhenLooped object was added. | 1.3.6.1.4.1.4874.2.2.15.4.2.1 | obsolete |
| juniSlepGroup2 OBJECT-GROUP A collection of objects providing management of SLEP interfaces in a Juniper product. | 1.3.6.1.4.1.4874.2.2.15.4.2.2 | current |