Juniper-REDUNDANCY-MIB
- Registered at
- 1.3.6.1.4.1.4874.2.2.74
- Last updated
- 2003-12-12 21:04
- Organization
- Juniper Networks, Inc.
- Revisions
- 2003-12-12 00:00
- Namespace
- juniper
- Source file
Juniper-REDUNDANCY-MIB- Digest
sha256:112cee906ef576ab6bd5c0f23a018480ed4a2667fa1a496dd0950c0dae6bfea6
Description
The redundancy configuration MIB for Juniper Networks enterprise.
Contact
Juniper Networks, Inc. Postal: 10 Technology Park Road Westford, MA 01886-3146 USA Tel: +1 978 589 5800 E-mail: mib@Juniper.net
Imports
| From | Symbols |
|---|---|
| Juniper-MIBs | juniMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysUpTime |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
Juniper-MIBs Juniper-REDUNDANCY-MIB Juniper-UNI-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| JuniRedundancyHistoryCommand TEXTUAL-CONVENTION Identifies the command to be performed on the system activation history table. keep - Retain history in persistent storage. clear - Erase the current entries of juniRedundancySystemActivationHistoryTable. | current | |||
| JuniRedundancyMode TEXTUAL-CONVENTION The mode of the redundancy subsystem: fileSystemSynchronization - SRP synchronization is based on file synchronization. highAvailability - SRP synchronization is based on high availability model that allows non-stop forwarding. | current | |||
| JuniRedundancyResetReason TEXTUAL-CONVENTION Reason codes for the reset of active SRP or a line card that might result in switch of control to standby SRP or spare line card. none - No reset or switchover has occurred and indicates 'power-on' situation. notKnown - Reason is unknown. userInitiated - A safe, manual reset was initiated by the user. | current | |||
| JuniRedundancyResetType TEXTUAL-CONVENTION Identifies the nature of the reset and slot types involved since the system is powered on. notKnown - Reset type is unknown. srpReload - The reset involved reloading SRP slot(s). srpSwitchover - The reset involved switchover of SRP slot(s). linecardReload - The reset involved reloading the line card slot(s). linecardSwitchover - The reset involved line card redundancy. | current | |||
| JuniRedundancyState TEXTUAL-CONVENTION The current state of redundancy subsystem: notKnown - Redundancy state is unknown. fileSystemSyncing - Redundancy operation is based on file system synchronization. SRP switchover stops forwarding. disabled - Redundancy operation is based on high availability model but high availability is not yet operational. SRP switchover stops forwarding. initializing - Redundancy operation is based on high availability model and standby SRP is being bulk synchronized from active SRP. SRP switchover stops forwarding. pending - Redundancy operation is based on high availability model and bulk synchronization of standby SRP completed. SRP switchover stops forwarding. active - Redundancy operation is based on high availability model and high availability is fully operational. SRP switchover does not stop forwarding. | current | |||
| JuniRedundancySystemActivationType TEXTUAL-CONVENTION Various kinds of system activation: reload - System has reloaded, i.e., no switchover has occurred. coldSwitch - System switched over from active to standby SRP and the switchover involved reloading of line cards interrupting forwarding. warmSwitch - System switched over from active to standby SRP; line cards were not reloaded during switchover and forwarding was uninterrupted. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| juniRedundancyNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.74.0 | |||
| juniRedundancyObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.74.1 | |||
| juniRedundancyStatus OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.74.1.1 | |||
| juniRedundancyActiveSlot OBJECT-TYPE A unique identifier for active SRP slot. | 1.3.6.1.4.1.4874.2.2.74.1.1.1 | Integer32 (0..255) | read-only | current |
| juniRedundancyActiveSlotState OBJECT-TYPE The current state of redundancy on active SRP. | 1.3.6.1.4.1.4874.2.2.74.1.1.2 | JuniRedundancyState | read-only | current |
| juniRedundancyStandbySlot OBJECT-TYPE A unique identifier for standby SRP slot. | 1.3.6.1.4.1.4874.2.2.74.1.1.3 | Integer32 (0..255) | read-only | current |
| juniRedundancyStandbySlotState OBJECT-TYPE The current state of redundancy on standby SRP. | 1.3.6.1.4.1.4874.2.2.74.1.1.4 | JuniRedundancyState | read-only | current |
| juniRedundancyLastResetReason OBJECT-TYPE The reason for the last SRP reset. | 1.3.6.1.4.1.4874.2.2.74.1.1.5 | JuniRedundancyResetReason | read-only | current |
| juniRedundancyLastSystemActivationTime OBJECT-TYPE The value of sysUptime when the system is operational either following a reload or a switchover. The value 0 is a special value to indicate 'from reset'. | 1.3.6.1.4.1.4874.2.2.74.1.1.6 | TimeTicks | read-only | current |
| juniRedundancyLastSystemActivationType OBJECT-TYPE The type of last SRP activation when the system became operational. | 1.3.6.1.4.1.4874.2.2.74.1.1.7 | JuniRedundancySystemActivationType | read-only | current |
| juniRedundancyHaActiveTime OBJECT-TYPE The value of sysUptime when active SRP enters 'active' state as indicated in juniRedundancyActiveSlotState object. The value is 0 in file system synchronization redundancy mode. | 1.3.6.1.4.1.4874.2.2.74.1.1.8 | TimeTicks | read-only | current |
| juniRedundancyCfg OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.74.1.2 | |||
| juniRedundancyNotifsEnabled OBJECT-TYPE Allows enabling and disabling of redundancy subsystem notifications. | 1.3.6.1.4.1.4874.2.2.74.1.2.1 | TruthValue | read-write | current |
| juniRedundancyCfgRedundancyMode OBJECT-TYPE Indicates the redundancy mode configured on the system. | 1.3.6.1.4.1.4874.2.2.74.1.2.2 | JuniRedundancyMode | read-write | current |
| juniRedundancyHistory OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.74.1.3 | |||
| juniRedundancySystemActivationHistoryTableMaxLength OBJECT-TYPE Maximum number of entries allowed in juniRedundancySystemActivationHistoryTable. A value of 0 will result in no history being displayed in juniRedundancySystemActivationHistoryTable. | 1.3.6.1.4.1.4874.2.2.74.1.3.1 | Integer32 (0..50) | read-write | current |
| juniRedundancySystemActivationHistoryCommand OBJECT-TYPE A control variable to perform certain operations on juniRedundancySystemActivationHistoryTable. | 1.3.6.1.4.1.4874.2.2.74.1.3.2 | JuniRedundancyHistoryCommand | read-write | current |
| juniRedundancySystemActivationHistoryTable OBJECT-TYPE A table that tracks the history of all reloads and switchovers that have occurred since system is powered on. The maximum number of entries permissible in this table is defined by juniRedundancySystemActivationHistoryTableMaxLength. When the number of entries in the table reaches the maximum limit, the next entry would replace the oldest existing entry in the table. | 1.3.6.1.4.1.4874.2.2.74.1.3.3 | not-accessible | current | |
| juniRedundancySystemActivationHistoryEntry OBJECT-TYPE The entries in this table contain the reload and switchover information. Each entry in the table is indexed by juniRedundancySystemActivationHistoryIndex. The index wraps around to 1 after reaching the maximum value. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1 | not-accessible | current | |
| juniRedundancySystemActivationHistoryIndex OBJECT-TYPE An integer value for the purpose of indexing system activation history table. After reaching maximum value as indicated by juniRedundancySystemActivationHistoryTableMaxLength, it wraps around to 1. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.1 | Integer32 | not-accessible | current |
| juniRedundancyHistoryResetType OBJECT-TYPE Indicates the nature of the reset - reload or switchover - and the slot types involved. Depending on the value of this object, certain elements of JuniRedundancySystemActivationHistoryEntry will not be applicable. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.2 | JuniRedundancyResetType | read-only | current |
| juniRedundancyHistoryActivationType OBJECT-TYPE Indicates the activation type of the particular historical system activation entry with respect to the slot types involved. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.3 | JuniRedundancySystemActivationType | read-only | current |
| juniRedundancyHistoryPrevActiveSlot OBJECT-TYPE Indicates the slot number of active SRP or line card that went down. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.4 | Integer32 (0..255) | read-only | current |
| juniRedundancyHistoryPrevActiveRelease OBJECT-TYPE Indicates the system-wide boot release file name of the slot indicated by juniRedundancyHistoryPrevActiveSlot. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.5 | DisplayString | read-only | current |
| juniRedundancyHistoryCurrActiveSlot OBJECT-TYPE Indicates the slot number of standby SRP or spare line card that took over. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.6 | Integer32 (0..255) | read-only | current |
| juniRedundancyHistoryCurrActiveRelease OBJECT-TYPE Indicates the system-wide boot release file name of the slot indicated by juniRedundancyHistoryCurrActiveSlot. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.7 | DisplayString | read-only | current |
| juniRedundancyHistoryResetReason OBJECT-TYPE Indicates the reason for reload or switchover of the slots involved. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.8 | JuniRedundancyResetReason | read-only | current |
| juniRedundancyHistoryActivationTime OBJECT-TYPE Indicates the date and time when the reload or switchover of the slots occurred. | 1.3.6.1.4.1.4874.2.2.74.1.3.3.1.9 | DateAndTime | read-only | current |
| juniRedundancyHistoryReloads OBJECT-TYPE Indicates the number of reloads since the system is powered on. | 1.3.6.1.4.1.4874.2.2.74.1.3.4 | Integer32 | read-only | current |
| juniRedundancyHistoryColdSwitchovers OBJECT-TYPE Indicates the number of cold switchovers since the system is powered on. | 1.3.6.1.4.1.4874.2.2.74.1.3.5 | Integer32 | read-only | current |
| juniRedundancyHistoryWarmSwitchovers OBJECT-TYPE Indicates the number of warm switchovers since the system is powered on. | 1.3.6.1.4.1.4874.2.2.74.1.3.6 | Integer32 | read-only | current |
| juniRedundancyMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.74.2 | |||
| juniRedundancyMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.74.2.1 | |||
| juniRedundancyMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.74.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| juniRedundancyColdSwitchoverNotification NOTIFICATION-TYPE This notification is generated in a dual SRP system when control transfers from one to SRP to the other in file system synchronization mode or when high availability is not operational. This notification is sent by the newly active SRP immediately following the switchover in which configuration is preserved but volatile state is lost. | 1.3.6.1.4.1.4874.2.2.74.0.1 | current |
| juniRedundancyWarmSwitchoverNotification NOTIFICATION-TYPE This notification is generated in a dual SRP system when control transfers from one SRP to the other and high availability is operational. This notification is sent by the newly active SRP immediately following the switchover in which configuration and volatile state are preserved. | 1.3.6.1.4.1.4874.2.2.74.0.2 | current |
| juniRedundancyStateEnabledNotification NOTIFICATION-TYPE A state change notification sent by active SRP whenever system enters 'active' state. | 1.3.6.1.4.1.4874.2.2.74.0.3 | current |
| juniRedundancyStateDisabledNotification NOTIFICATION-TYPE A state change notification sent by active SRP whenever system enters 'disabled' state. | 1.3.6.1.4.1.4874.2.2.74.0.4 | current |
| juniRedundancyStatePendingNotification NOTIFICATION-TYPE A state change notification sent by active SRP whenever system enters 'pending' state. | 1.3.6.1.4.1.4874.2.2.74.0.5 | current |
| juniRedundancyModeNotification NOTIFICATION-TYPE A mode change notification sent by active SRP whenever redundancy mode of the system is changed from 'fileSystemSynchronization' to 'highAvailability' and vice versa. | 1.3.6.1.4.1.4874.2.2.74.0.6 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| juniRedundancyMIBCompliance MODULE-COMPLIANCE The compliance statement for system redundancy support. | 1.3.6.1.4.1.4874.2.2.74.2.1.1 | current |
| juniRedundancyStatusGroup OBJECT-GROUP The collection of redundancy status objects. | 1.3.6.1.4.1.4874.2.2.74.2.2.1 | current |
| juniRedundancyCfgGroup OBJECT-GROUP The collection of redundancy configuration objects. | 1.3.6.1.4.1.4874.2.2.74.2.2.2 | current |
| juniRedundancyHistoryGroup OBJECT-GROUP The collection of redundancy history objects. | 1.3.6.1.4.1.4874.2.2.74.2.2.3 | current |
| juniRedundancyNotificationGroup NOTIFICATION-GROUP The collection of notifications for redundancy events. | 1.3.6.1.4.1.4874.2.2.74.2.2.4 | current |