Juniper-QoS-MIB
- Registered at
- 1.3.6.1.4.1.4874.2.2.57
- Last updated
- 2005-07-06 14:18
- Organization
- Juniper Networks, Inc.
- Revisions
- 2005-07-06 14:18, 2005-04-01 19:00, 2004-12-10 19:16, 2004-01-26 14:19, 2003-11-04 20:10, 2003-05-08 17:05, 2003-03-13 18:17, 2003-03-12 18:30
- Namespace
- juniper
- Source file
Juniper-QoS-MIB- Digest
sha256:1a0e0aa675d8dea18d0345c19189c42fb4368ef582bc7f1bc0643734ed47baf4
Description
The Quality of Service (QoS) MIB for the Juniper Networks enterprise.
Contact
Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| Juniper-MIBs | juniMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB Juniper-MIBs Juniper-QoS-MIB Juniper-UNI-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| JuniQosLogicalInterfaceType TEXTUAL-CONVENTION A logical interface type supported by QoS. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| juniQosObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1 | |||
| juniQosCapability OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.1 | |||
| juniQosMaxTrafficClass OBJECT-TYPE This object reflects the maximum number of traffic classes supported. | 1.3.6.1.4.1.4874.2.2.57.1.1.1 | Unsigned32 | read-only | current |
| juniQosMaxQueueLength OBJECT-TYPE This object reflects the maximum supported queue length in bytes. | 1.3.6.1.4.1.4874.2.2.57.1.1.2 | Unsigned32 | read-only | current |
| juniQosMinSchedulerBurst OBJECT-TYPE This object reflects the minimum supported scheduler burst size in bytes. | 1.3.6.1.4.1.4874.2.2.57.1.1.3 | Unsigned32 | read-only | current |
| juniQosMaxSchedulerBurst OBJECT-TYPE This object reflects the maximum supported scheduler burst size in bytes. | 1.3.6.1.4.1.4874.2.2.57.1.1.4 | Unsigned32 | read-only | current |
| juniQosMaxQosProfileRules OBJECT-TYPE This object reflects the maximum number of rules per qos-profile supported. | 1.3.6.1.4.1.4874.2.2.57.1.1.5 | Unsigned32 | read-only | current |
| juniQos OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.2 | |||
| juniQosTrafficClassCount OBJECT-TYPE This object reflects the number of configured traffic classes. | 1.3.6.1.4.1.4874.2.2.57.1.2.1 | Gauge32 | read-only | current |
| juniQosQueueProfileCount OBJECT-TYPE This object reflects the number of configured queue profiles. | 1.3.6.1.4.1.4874.2.2.57.1.2.2 | Gauge32 | read-only | current |
| juniQosSchedulerProfileCount OBJECT-TYPE This object reflects the number of configured scheduler profiles. | 1.3.6.1.4.1.4874.2.2.57.1.2.3 | Gauge32 | read-only | current |
| juniQosProfileCount OBJECT-TYPE This object reflects the number of configured QoS profiles. | 1.3.6.1.4.1.4874.2.2.57.1.2.4 | Gauge32 | read-only | current |
| juniQosInterfaceCount OBJECT-TYPE This object reflects the number of configured interface QoS attachments. | 1.3.6.1.4.1.4874.2.2.57.1.2.5 | Gauge32 | read-only | current |
| juniQosQosPortTypeProfileCount OBJECT-TYPE This object reflects the number of configured default port profiles. | 1.3.6.1.4.1.4874.2.2.57.1.2.6 | Gauge32 | read-only | current |
| juniQosDropProfileCount OBJECT-TYPE This object reflects the number of configured drop profiles. | 1.3.6.1.4.1.4874.2.2.57.1.2.7 | Gauge32 | read-only | current |
| juniQosStatisticsProfileCount OBJECT-TYPE This object reflects the number of configured statistics profiles. | 1.3.6.1.4.1.4874.2.2.57.1.2.8 | Gauge32 | read-only | current |
| juniQosTrafficClassList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.3 | |||
| juniQosTrafficClassNextIndex OBJECT-TYPE This scalar object returns the index of the next available row in the juniQosTrafficClassTable. | 1.3.6.1.4.1.4874.2.2.57.1.3.1 | Unsigned32 | read-only | current |
| juniQosTrafficClassTable OBJECT-TYPE This table contains entries for elements of Traffic Class definitions. | 1.3.6.1.4.1.4874.2.2.57.1.3.2 | not-accessible | current | |
| juniQosTrafficClassEntry OBJECT-TYPE Each entry describes the characteristics of a traffic class element. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1 | not-accessible | current | |
| juniQosTrafficClassIndex OBJECT-TYPE The number of the traffic class entry which is defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.1 | Unsigned32 | not-accessible | current |
| juniQosTrafficClassRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosTrafficClassRowStatus juniQosTrafficClassName | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.2 | RowStatus | read-create | current |
| juniQosTrafficClassName OBJECT-TYPE Specifies the name of the traffic class defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.3 | DisplayString (SIZE(1..32)) | read-create | current |
| juniQosTrafficClassWeight OBJECT-TYPE The relative weight for queues in this traffic class. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.4 | Unsigned32 (1..63) | read-create | current |
| juniQosTrafficClassStrictPriority OBJECT-TYPE The traffic to be dequeued before all other classes. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.5 | TruthValue | read-create | current |
| juniQosTrafficClassUpdatePending OBJECT-TYPE True if modifications have been made to the traffic class object which have not been committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.6 | TruthValue | read-only | current |
| juniQosTrafficClassUpdateNow OBJECT-TYPE When set to true, modifications made to the traffic class object will be committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.7 | TruthValue | read-create | current |
| juniQosTrafficClassIsReferencedByGroup OBJECT-TYPE When true, the traffic class is referenced by a traffic class group. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.8 | TruthValue | read-only | current |
| juniQosTrafficClassIsReferencedByQosProfile OBJECT-TYPE When true, the traffic class is referenced by a QoS profile. | 1.3.6.1.4.1.4874.2.2.57.1.3.2.1.9 | TruthValue | read-only | current |
| juniQosTrafficClassGroupList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.4 | |||
| juniQosTrafficClassGroupNextIndex OBJECT-TYPE This scalar object returns the index of the next available row in the juniQosTrafficClassGroupTable. | 1.3.6.1.4.1.4874.2.2.57.1.4.1 | Unsigned32 | read-only | current |
| juniQosTrafficClassGroupTable OBJECT-TYPE This table contains entries for elements of Traffic Class group definitions. | 1.3.6.1.4.1.4874.2.2.57.1.4.2 | not-accessible | current | |
| juniQosTrafficClassGroupEntry OBJECT-TYPE Each entry describes the characteristics of a traffic class group element. | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1 | not-accessible | current | |
| juniQosTrafficClassGroupIndex OBJECT-TYPE The number of the traffic class entry which is defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.1 | Unsigned32 | not-accessible | current |
| juniQosTrafficClassGroupRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosTrafficClassGroupRowStatus juniQosTrafficClassGroupName | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.2 | RowStatus | read-create | current |
| juniQosTrafficClassGroupName OBJECT-TYPE Specifies the name of the traffic class group defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.3 | DisplayString (SIZE(1..32)) | read-create | current |
| juniQosTrafficClassGroupUpdatePending OBJECT-TYPE True if modifications have been made to the traffic class group object which have not been committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.4 | TruthValue | read-only | current |
| juniQosTrafficClassGroupUpdateNow OBJECT-TYPE When set to true, modifications made to the traffic class group object will be committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.5 | TruthValue | read-create | current |
| juniQosTrafficClassGroupIsReferencedByQosProfile OBJECT-TYPE When true, the traffic class group is referenced by a QoS profile. | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.6 | TruthValue | read-only | current |
| juniQosTrafficClassGroupSlotNumber OBJECT-TYPE The number of the slot on which this traffic class group is applied. Traffic class groups may be global or local. Global groups indicate that the traffic class group is to be applied to each line card in the chassis. The value of this object is -1 for global traffic class groups. Local traffic class groups override global traffic class groups and are applied to the slot indicated by the value of this object. | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.7 | Integer32 (-1..2147483647) | read-create | current |
| juniQosTrafficClassGroupExtendedGroup OBJECT-TYPE When true, the traffic class group is an extended group. False indicates the traffic class group is an auto-strict-priority group. | 1.3.6.1.4.1.4874.2.2.57.1.4.2.1.8 | TruthValue | read-create | current |
| juniQosTrafficClassGroupEntryList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.5 | |||
| juniQosTrafficClassGroupEntryTable OBJECT-TYPE This table identifies which traffic classes are in each traffic class group. | 1.3.6.1.4.1.4874.2.2.57.1.5.1 | not-accessible | current | |
| juniQosTrafficClassGroupEntryEntry OBJECT-TYPE Each entry ties a traffic class table entry to a traffic class group. | 1.3.6.1.4.1.4874.2.2.57.1.5.1.1 | not-accessible | current | |
| juniQosTrafficClassGroupEntryRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry object MUST be explicitly configured: juniQosTrafficClassGroupEntryRowStatus | 1.3.6.1.4.1.4874.2.2.57.1.5.1.1.1 | RowStatus | read-create | current |
| juniQosSchedulerProfileList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.6 | |||
| juniQosSchedulerProfileNextIndex OBJECT-TYPE This scalar object returns the index of the next available row in the juniQosSchedulerProfileTable. | 1.3.6.1.4.1.4874.2.2.57.1.6.1 | Unsigned32 | read-only | current |
| juniQosSchedulerProfileTable OBJECT-TYPE This table contains entries for elements of Scheduler Profile definitions. | 1.3.6.1.4.1.4874.2.2.57.1.6.2 | not-accessible | current | |
| juniQosSchedulerProfileEntry OBJECT-TYPE Each entry describes the characteristics of a scheduler profile element. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1 | not-accessible | current | |
| juniQosSchedulerProfileIndex OBJECT-TYPE The number of the scheduler profile entry which is defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.1 | Unsigned32 | not-accessible | current |
| juniQosSchedulerProfileRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosSchedulerProfileRowStatus juniQosSchedulerProfileName | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.2 | RowStatus | read-create | current |
| juniQosSchedulerProfileName OBJECT-TYPE Specifies the name of the scheduler profile defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.3 | DisplayString (SIZE(1..32)) | read-create | current |
| juniQosSchedulerProfileShapingRate OBJECT-TYPE Specifies the shaping rate in bits per second (bps). Values between 1 and 63999 are not supported. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.4 | Unsigned32 (0..1000000000) | read-create | current |
| juniQosSchedulerProfileBurst OBJECT-TYPE Specifies the catch-up burst size in bytes. Burst value of 0 indicates the largest burst size the system will allow without losing accuracy. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.5 | Unsigned32 (0..522240) | read-create | current |
| juniQosSchedulerProfileWeight OBJECT-TYPE The relative weight of the scheduler. When an assured rate is specified, this object is ignored. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.6 | Unsigned32 (0..4080) | read-create | current |
| juniQosSchedulerProfileStrictPriority OBJECT-TYPE Specifies the traffic to be dequeued before all other scheduler nodes. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.7 | TruthValue | read-create | current |
| juniQosSchedulerProfileUpdatePending OBJECT-TYPE True if modifications have been made to the scheduler profile object which have not been committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.8 | TruthValue | read-only | current |
| juniQosSchedulerProfileUpdateNow OBJECT-TYPE When set to true, modifications made to the scheduler profile object will be committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.9 | TruthValue | read-create | current |
| juniQosSchedulerProfileIsReferencedByQosProfile OBJECT-TYPE When true, the scheduler profile is referenced by a QoS profile. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.10 | TruthValue | read-only | current |
| juniQosSchedulerProfileAssuredRate OBJECT-TYPE Specifies the assured rate in bits per second (bps). When this object has a non-default value, the scheduler weight (juniQosSchedulerProfileWeight) is ignored. A value of '4294967295' configures Hierarchical Assured Rate. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.11 | Unsigned32 (0 | 25000..1000000000 | 4294967295) | read-create | current |
| juniQosSchedulerProfileSharedShapingRate OBJECT-TYPE Specifies the shared shaping rate in bits per second (bps). The range of 1 to 63999 is not supported. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.12 | Unsigned32 (0..1000000000) | read-create | current |
| juniQosSchedulerProfileSharedShapingBurstSize OBJECT-TYPE Specifies the catch-up burst size for a shared shaping, in bytes. A value of zero indicates that the system should choose an appropriate default value. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.13 | Unsigned32 (0..522240) | read-create | current |
| juniQosSchedulerProfileSharedShapingType OBJECT-TYPE The value of this object specifies the type of shared shaping that is to be performed when shared shaping is enabled. Shared shaper types are defined as follows: 'simple' indicates that Simple Shared Shaping is performed regardless of the line cards capabilities. 'compound' indicates that Compound Shared Shaping is to be performed. When compound is specified for a line card that does not support Compound Shared Shaping, a warning message is logged, and Simple Shared Shaping is configured instead. 'auto' indicates that selection of the shared shaper should be automatic such that compound shared shaping is performed on line cards which support it and simple shared shaping is performed on line cards that do not support it. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.14 | INTEGER {none(0), simple(1), compound(2), auto(3)} | read-create | current |
| juniQosSchedulerProfileSharedShapingExplicitConstituents OBJECT-TYPE This option allows automatic shared shaper constituent selecting and bandwidth allocation to be overridden. By default, constituents are configured implicitly. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.15 | TruthValue | read-create | current |
| juniQosSchedulerProfileSharedShapingPriority OBJECT-TYPE The priority of a strict shared shaper constituent. When the value of juniQosSchedulerProfileSharedShaper- ConstituentType is 'strict' the value of this object determines the order in which the strict constituent can claim bandwidth. Priority values range from 1 to 8, with priority 1 getting first claim amongst strict constituents on available shared bandwidth, and priority 8 getting final claim amongst strict constituents on available bandwidth. When two or more strict constituents have the same priority value, the rules used for implicit bandwidth allocation are applied to determine their order. A value of zero indicates 'not a constituent' of a shared shaper. A value of -1 indicates 'is a constituent' of a shared shaper, but the system is free to choose whether the constituent is 'strict-priority' of 'weighted' This object takes precedence over the juniQosSchedulerProfileSharedShapingWeight object. When set to a value from 1 to 8 the system sets the value of juniQosSchedulerProfileSharedShaping- Weight to zero. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.16 | Integer32 (-1..8) | read-create | current |
| juniQosSchedulerProfileSharedShapingWeight OBJECT-TYPE The weight of a weighted shared shaper constituent. When the value of juniQosSchedulerProfileSharedShaper- ConstituentType is 'weighted' the value of this object determines the proportion of the weighted constituent's bandwidth Non-zero values specify the weight of a weighted shared shaping constituent. A value of zero indicates 'not a constituent' of a shared shaper. A value of -1 indicates 'is a constituent' of a shared shaper, but the system is free to choose whether the constituent is 'strict-priority' of 'weighted' The juniQosSchedulerProfileSharedShapingPriority has precedence over the this object. | 1.3.6.1.4.1.4874.2.2.57.1.6.2.1.17 | Integer32 (-1..31) | read-create | current |
| juniQosQueueProfileList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.7 | |||
| juniQosQueueProfileNextIndex OBJECT-TYPE This scalar object returns the index of the next available row in the juniQosQueueProfileTable. | 1.3.6.1.4.1.4874.2.2.57.1.7.1 | Unsigned32 | read-only | current |
| juniQosQueueProfileTable OBJECT-TYPE This table contains entries for elements of queue profile definitions. | 1.3.6.1.4.1.4874.2.2.57.1.7.2 | not-accessible | current | |
| juniQosQueueProfileEntry OBJECT-TYPE Each entry describes the characteristics of a queue profile element. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1 | not-accessible | current | |
| juniQosQueueProfileIndex OBJECT-TYPE The number of the queue profile entry which is defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.1 | Unsigned32 | not-accessible | current |
| juniQosQueueProfileRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosQueueProfileRowStatus juniQosQueueProfileName | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.2 | RowStatus | read-create | current |
| juniQosQueueProfileName OBJECT-TYPE Specifies the name of the queue profile defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.3 | DisplayString (SIZE(1..32)) | read-create | current |
| juniQosQueueProfileCommittedMinLength OBJECT-TYPE Specifies the minimum queue length in bytes for committed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.4 | Unsigned32 | read-create | current |
| juniQosQueueProfileCommittedMaxLength OBJECT-TYPE Specifies the maximum queue length in bytes for committed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.5 | Unsigned32 | read-create | current |
| juniQosQueueProfileConformedMinLength OBJECT-TYPE Specifies the minimum queue length in bytes for conformed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.6 | Unsigned32 | read-create | current |
| juniQosQueueProfileConformedMaxLength OBJECT-TYPE Specifies the maximum queue length in bytes for conformed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.7 | Unsigned32 | read-create | current |
| juniQosQueueProfileExceededMinLength OBJECT-TYPE Specifies the minimum queue length in bytes for exceeded traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.8 | Unsigned32 | read-create | current |
| juniQosQueueProfileExceededMaxLength OBJECT-TYPE Specifies the maximum queue length in bytes for exceeded traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.9 | Unsigned32 | read-create | current |
| juniQosQueueProfileConformedFraction OBJECT-TYPE Specifies the maximum percentage of queue occupied by conformed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.10 | Unsigned32 (0..100) | read-create | current |
| juniQosQueueProfileExceededFraction OBJECT-TYPE Specifies the maximum percentage of queue occupied by exceeded traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.11 | Unsigned32 (0..100) | read-create | current |
| juniQosQueueProfileCommittedDropThreshold OBJECT-TYPE Specifies the drop threshold (percent of queue) for committed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.12 | Unsigned32 (0..100) | read-create | current |
| juniQosQueueProfileCommittedDropRate OBJECT-TYPE Specifies the drop rate (percent of traffic) for committed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.13 | Unsigned32 (0..100) | read-create | current |
| juniQosQueueProfileConformedDropThreshold OBJECT-TYPE Specifies the drop threshold (percent of queue) for comformed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.14 | Unsigned32 (0..100) | read-create | current |
| juniQosQueueProfileConformedDropRate OBJECT-TYPE Specifies the drop rate (percent of traffic) for comformed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.15 | Unsigned32 (0..100) | read-create | current |
| juniQosQueueProfileExceededDropThreshold OBJECT-TYPE Specifies the drop threshold (percent of queue) for exceeded traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.16 | Unsigned32 (0..100) | read-create | current |
| juniQosQueueProfileExceededDropRate OBJECT-TYPE Specifies the drop rate (percent of traffic) for exceeded traffic. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.17 | Unsigned32 (0..100) | read-create | current |
| juniQosQueueProfileBufferWeight OBJECT-TYPE The relative weight for queues in this traffic class. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.18 | Unsigned32 (1..63) | read-create | current |
| juniQosQueueProfileUpdatePending OBJECT-TYPE True if modifications have been made to the queue profile object which have not been committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.19 | TruthValue | read-only | current |
| juniQosQueueProfileUpdateNow OBJECT-TYPE When set to true, modifications made to the queue profile object will be committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.20 | TruthValue | read-create | current |
| juniQosQueueProfileIsReferencedByQosProfile OBJECT-TYPE When true, the queue profile is referenced by a QoS profile. | 1.3.6.1.4.1.4874.2.2.57.1.7.2.1.21 | TruthValue | read-only | current |
| juniQosProfile OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.8 | |||
| juniQosProfileNextIndex OBJECT-TYPE This scalar object returns the index of the next available row in the juniQosProfileTable. | 1.3.6.1.4.1.4874.2.2.57.1.8.1 | Unsigned32 | read-only | current |
| juniQosProfileTable OBJECT-TYPE This table contains entries for elements of QoS Profile definitions. | 1.3.6.1.4.1.4874.2.2.57.1.8.2 | not-accessible | current | |
| juniQosProfileEntry OBJECT-TYPE Each entry describes the characteristics of a QoS profile element. | 1.3.6.1.4.1.4874.2.2.57.1.8.2.1 | not-accessible | current | |
| juniQosProfileIndex OBJECT-TYPE The number identifies this QoS profile. | 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.1 | Unsigned32 | not-accessible | current |
| juniQosProfileRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create a QoS profile in this table, the following entry objects MUST be explicitly configured: juniQosProfileRowStatus juniQosProfileName | 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.2 | RowStatus | read-create | current |
| juniQosProfileName OBJECT-TYPE Specifies the name of the QoS profile defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.3 | DisplayString (SIZE(1..32)) | read-create | current |
| juniQosProfileUpdatePending OBJECT-TYPE True if modifications have been made to the QoS profile object which have not been committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.4 | TruthValue | read-only | current |
| juniQosProfileUpdateNow OBJECT-TYPE When set to true, modifications made to the QoS profile object will be committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.5 | TruthValue | read-create | current |
| juniQosProfileIsReferencedByInterfaceQosAttachment OBJECT-TYPE When true, the QoS profile is referenced by an interface QoS attachment. | 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.6 | TruthValue | read-only | current |
| juniQosProfileIsReferencedByQosPortTypeProfile OBJECT-TYPE When true, the QoS profile is referenced by a QoS port type profile. | 1.3.6.1.4.1.4874.2.2.57.1.8.2.1.7 | TruthValue | read-only | current |
| juniQosProfileElement OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.9 | |||
| juniQosProfileElementTable OBJECT-TYPE This table contains entries for elements of QoS profile definitions. | 1.3.6.1.4.1.4874.2.2.57.1.9.1 | not-accessible | current | |
| juniQosProfileElementEntry OBJECT-TYPE Each entry describes the characteristics of a QoS profile element. | 1.3.6.1.4.1.4874.2.2.57.1.9.1.1 | not-accessible | current | |
| juniQosProfileElementEntryRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry object MUST be explicitly configured: juniQosProfileRowStatus | 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.1 | RowStatus | read-create | current |
| juniQosProfileElementEntryQueueProfile OBJECT-TYPE Specifies the queue profile assigned to the QoS entry. | 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.2 | Unsigned32 | read-create | current |
| juniQosProfileElementEntrySchedulerProfile OBJECT-TYPE Specifies the scheduler profile assigned to the QoS entry. | 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.3 | Unsigned32 | read-create | current |
| juniQosInterfaceType OBJECT-TYPE The QoS interface type ID, part of the index for juniQosProfileElementTable. Please note that if the juniQpsProfileEntryType is trafficClassGroup, then only ethernet, atm, serial, and serverPort are valid interface types. | 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.4 | INTEGER {ip(0), ethernet(6), atm(9), atmVc(11), serial(13), frVc(16), l2tpSession(21), serverPort(31), vlan(35), cbf(36), ipv6(50), l2tpTunnel(150), ipTunnel(151), atmVp(163), svlan(174)} | not-accessible | current |
| juniQosProfileEntryType OBJECT-TYPE The QoS profile type, part of the index for juniQosProfileElementTable. | 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.5 | INTEGER {trafficClass(1), schedulerProfile(2), trafficClassGroup(3), shadowNode(4)} | not-accessible | current |
| juniQosProfileElementEntryDropProfile OBJECT-TYPE Specifies the drop profile assigned to the QoS entry. | 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.6 | Unsigned32 | read-create | current |
| juniQosProfileElementEntryStatisticsProfile OBJECT-TYPE Specifies the statistics profile assigned to the QoS entry. | 1.3.6.1.4.1.4874.2.2.57.1.9.1.1.7 | Unsigned32 | read-create | current |
| juniQosIfAttach OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.10 | |||
| juniQosIfAttachTable OBJECT-TYPE This table contains entries which represent attachment of QoS to interfaces. | 1.3.6.1.4.1.4874.2.2.57.1.10.1 | not-accessible | current | |
| juniQosIfAttachEntry OBJECT-TYPE Each entry contains the attachment of QoS to an interface. | 1.3.6.1.4.1.4874.2.2.57.1.10.1.1 | not-accessible | current | |
| juniQosIfAttachIndex OBJECT-TYPE The interface number representing the interface to which QoS has been attached. | 1.3.6.1.4.1.4874.2.2.57.1.10.1.1.1 | Unsigned32 | not-accessible | current |
| juniQosIfAttachRowStatus OBJECT-TYPE Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy juniQosIfAttachQosProfileIndex must be specified when creating the row. *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list. destroy Destroy the specified list and all of its constituent elements. | 1.3.6.1.4.1.4874.2.2.57.1.10.1.1.2 | RowStatus | read-create | current |
| juniQosIfAttachQosProfileIndex OBJECT-TYPE The QoS profile attached to this interface. | 1.3.6.1.4.1.4874.2.2.57.1.10.1.1.3 | Unsigned32 | read-create | current |
| juniQosQosPortTypeProfile OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.11 | |||
| juniQosQosPortTypeProfileTable OBJECT-TYPE This table contains entries which represent attachment of QoS to interface types with which they are associated. | 1.3.6.1.4.1.4874.2.2.57.1.11.1 | not-accessible | current | |
| juniQosQosPortTypeProfileEntry OBJECT-TYPE Each entry contains the attachment of QoS to an interface. | 1.3.6.1.4.1.4874.2.2.57.1.11.1.1 | not-accessible | current | |
| juniQosQosPortTypeProfileIndex OBJECT-TYPE The interface number representing the types of interface to which QoS has been attached. | 1.3.6.1.4.1.4874.2.2.57.1.11.1.1.1 | INTEGER {ethernet(6), atm(9), serial(13), serverPort(31), lag(54)} | not-accessible | current |
| juniQosQosPortTypeProfileRowStatus OBJECT-TYPE Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy juniQosQosPortTypeProfileQosProfileIndex must be specified when creating the row. *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list. destroy Destroy the specified list and all of its constituent elements. | 1.3.6.1.4.1.4874.2.2.57.1.11.1.1.2 | RowStatus | read-create | current |
| juniQosQosPortTypeProfileQosProfileIndex OBJECT-TYPE The QoS profile assigned to this port type. | 1.3.6.1.4.1.4874.2.2.57.1.11.1.1.3 | Unsigned32 | read-create | current |
| juniQosQueueStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.12 | |||
| juniQosQueueStatisticsTable OBJECT-TYPE Each entry within this table contains queue statistics for an interface/traffic class combination. | 1.3.6.1.4.1.4874.2.2.57.1.12.1 | not-accessible | current | |
| juniQosQueueStatisticsEntry OBJECT-TYPE Each entry defines a single queue statistics entry. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1 | not-accessible | current | |
| juniQosOutPacketForwarded OBJECT-TYPE The number of packets queued on this interface. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.1 | Counter64 | read-only | current |
| juniQosOutBytesForwarded OBJECT-TYPE The number of bytes queued on this interface. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.2 | Counter64 | read-only | current |
| juniQosOutGreenPacketsSchedulerDrops OBJECT-TYPE The number of green packets dropped on this interface. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.3 | Counter64 | read-only | current |
| juniQosOutYellowPacketsSchedulerDrops OBJECT-TYPE The number of yellow packets dropped on this interface. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.4 | Counter64 | read-only | current |
| juniQosOutRedPacketsSchedulerDrops OBJECT-TYPE The number of red packets dropped on this interface. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.5 | Counter64 | read-only | current |
| juniQosOutGreenBytesSchedulerDrops OBJECT-TYPE The number of green bytes dropped on this interface. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.6 | Counter64 | read-only | current |
| juniQosOutYellowBytesSchedulerDrops OBJECT-TYPE The number of yellow bytes dropped on this interface. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.7 | Counter64 | read-only | current |
| juniQosOutRedBytesSchedulerDrops OBJECT-TYPE The number of red bytes dropped on this interface. | 1.3.6.1.4.1.4874.2.2.57.1.12.1.1.8 | Counter64 | read-only | current |
| juniQosDropProfileList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.13 | |||
| juniQosDropProfileNextIndex OBJECT-TYPE This scalar object returns the index of the next available row in the juniQosDropProfileTable. | 1.3.6.1.4.1.4874.2.2.57.1.13.1 | Unsigned32 | read-only | current |
| juniQosDropProfileTable OBJECT-TYPE This table contains entries for elements of drop profile definitions. | 1.3.6.1.4.1.4874.2.2.57.1.13.2 | not-accessible | current | |
| juniQosDropProfileEntry OBJECT-TYPE Each entry describes the characteristics of a drop profile element. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1 | not-accessible | current | |
| juniQosDropProfileIndex OBJECT-TYPE The number of the drop profile entry which is defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.1 | Unsigned32 | not-accessible | current |
| juniQosDropProfileRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosDropProfileRowStatus juniQosDropProfileName | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.2 | RowStatus | read-create | current |
| juniQosDropProfileName OBJECT-TYPE Specifies the name of the drop profile defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.3 | DisplayString (SIZE(1..32)) | read-create | current |
| juniQosDropProfileAverageLengthExponent OBJECT-TYPE Specifies the exponent used to weight the average queue length over time, controlling RED responsiveness. A non-default value enables the average queue length calculation. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.4 | Unsigned32 (0..20) | read-create | current |
| juniQosDropProfileCommittedThresholdUnits OBJECT-TYPE Specifies the units for the committed minimum and maximum thresholds. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.5 | INTEGER {bytes(1), percent(2)} | read-create | current |
| juniQosDropProfileCommittedThresholdMinThreshold OBJECT-TYPE Specifies the minimum drop threshold for committed traffic. The units are defined by juniQosDropProfileCommittedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.6 | Unsigned32 | read-create | current |
| juniQosDropProfileCommittedThresholdMaxThreshold OBJECT-TYPE Specifies the maximum drop threshold for committed traffic. The units are defined by juniQosDropProfileCommittedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. Setting the minimum and maximum thresholds to 0 disables the threshold. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.7 | Unsigned32 | read-create | current |
| juniQosDropProfileCommittedThresholdMaxDropProbability OBJECT-TYPE Specifies the maximum drop probability for committed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.8 | Unsigned32 (0..100) | read-create | current |
| juniQosDropProfileConformedThresholdUnits OBJECT-TYPE Specifies the units for the conformed minimum and maximum thresholds. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.9 | INTEGER {bytes(1), percent(2)} | read-create | current |
| juniQosDropProfileConformedThresholdMinThreshold OBJECT-TYPE Specifies the minimum drop threshold for conformed traffic. The units are defined by juniQosDropProfileConformedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.10 | Unsigned32 | read-create | current |
| juniQosDropProfileConformedThresholdMaxThreshold OBJECT-TYPE Specifies the maximum drop threshold for conformed traffic. The units are defined by juniQosDropProfileConformedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. Setting the minimum and maximum thresholds to 0 disables the threshold. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.11 | Unsigned32 | read-create | current |
| juniQosDropProfileConformedThresholdMaxDropProbability OBJECT-TYPE Specifies the maximum drop probability for conformed traffic. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.12 | Unsigned32 (0..100) | read-create | current |
| juniQosDropProfileExceededThresholdUnits OBJECT-TYPE Specifies the units for the exceeded minimum and maximum thresholds. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.13 | INTEGER {bytes(1), percent(2)} | read-create | current |
| juniQosDropProfileExceededThresholdMinThreshold OBJECT-TYPE Specifies the minimum drop threshold for exceeded traffic. The units are defined by juniQosDropProfileExceededThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.14 | Unsigned32 | read-create | current |
| juniQosDropProfileExceededThresholdMaxThreshold OBJECT-TYPE Specifies the maximum drop threshold for exceeded traffic. The units are defined by juniQosDropProfileExceededThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units are percent, the value must be in the range of 1..100. Setting the minimum and maximum thresholds to 0 disables the threshold. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.15 | Unsigned32 | read-create | current |
| juniQosDropProfileExceededThresholdMaxDropProbability OBJECT-TYPE Specifies the maximum drop probability for exceeded traffic. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.16 | Unsigned32 (0..100) | read-create | current |
| juniQosDropProfileUpdatePending OBJECT-TYPE True if modifications have been made to the drop profile object which have not been committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.17 | TruthValue | read-only | current |
| juniQosDropProfileUpdateNow OBJECT-TYPE When set to true, modifications made to the drop profile object will be committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.18 | TruthValue | read-create | current |
| juniQosDropProfileIsReferencedByQosProfile OBJECT-TYPE True if the drop profile is referenced by QoS profile(s). | 1.3.6.1.4.1.4874.2.2.57.1.13.2.1.19 | TruthValue | read-only | current |
| juniQosAtmVpUidSupport OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.14 | |||
| juniQosAtmVpUidValid OBJECT-TYPE This object reflects the status of the ATM VP UID translation objects. | 1.3.6.1.4.1.4874.2.2.57.1.14.1 | INTEGER {valid(0), badPortInterfaceUid(1), badPath(2), badAtmVpUid(3)} | read-only | current |
| juniQosAtmVpAtmPortInterfaceUid OBJECT-TYPE This object is the ATM port interface UID which correlates to the ATM VP UID object. | 1.3.6.1.4.1.4874.2.2.57.1.14.2 | Unsigned32 | read-write | current |
| juniQosAtmVpAtmPath OBJECT-TYPE This object is the ATM VP which correlates to the ATM VP UID object. | 1.3.6.1.4.1.4874.2.2.57.1.14.3 | Unsigned32 (0..255) | read-write | current |
| juniQosAtmVpUid OBJECT-TYPE This object is the ATM VP UID which correlates to the ATM port interface and path objects. | 1.3.6.1.4.1.4874.2.2.57.1.14.4 | Unsigned32 | read-write | current |
| juniQosStatisticsProfileList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.15 | |||
| juniQosStatisticsProfileNextIndex OBJECT-TYPE This scalar object returns the index of the next available row in the juniQosStatsProfileTable. | 1.3.6.1.4.1.4874.2.2.57.1.15.1 | Unsigned32 | read-only | current |
| juniQosStatisticsProfileTable OBJECT-TYPE This table contains entries for elements of Statistics Profile definitions. | 1.3.6.1.4.1.4874.2.2.57.1.15.2 | not-accessible | current | |
| juniQosStatisticsProfileEntry OBJECT-TYPE Each entry describes the characteristics of a statstics profile element. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1 | not-accessible | current | |
| juniQosStatisticsProfileIndex OBJECT-TYPE The number of the statistics profile entry which is defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.1 | Unsigned32 | not-accessible | current |
| juniQosStatisticsProfileRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosStatisticsProfileRowStatus juniQosStatisticsProfileName | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.2 | RowStatus | read-create | current |
| juniQosStatisticsProfileName OBJECT-TYPE Specifies the name of the statistics profile defined by this row. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.3 | DisplayString (SIZE(1..32)) | read-create | current |
| juniQosStatisticsProfileForwardingRateThreshold OBJECT-TYPE Specifies the forwarding rate threshold. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.4 | Unsigned32 | read-create | current |
| juniQosStatisticsProfileCommittedDropThreshold OBJECT-TYPE Specifies the committed drop threshold. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.5 | Unsigned32 | read-create | current |
| juniQosStatisticsProfileConformedDropThreshold OBJECT-TYPE Specifies the conformed drop threshold. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.6 | Unsigned32 | read-create | current |
| juniQosStatisticsProfileExceededDropThreshold OBJECT-TYPE Specifies the exceeded drop threshold. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.7 | Unsigned32 | read-create | current |
| juniQosStatisticsProfileRatePeriod OBJECT-TYPE Specifies the rate period over which forwarding and drop thresholds are calculated | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.8 | Unsigned32 | read-create | current |
| juniQosStatisticsProfileUpdatePending OBJECT-TYPE True if modifications have been made to the statistics profile object which have not been committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.9 | TruthValue | read-only | current |
| juniQosStatisticsProfileUpdateNow OBJECT-TYPE When set to true, modifications made to the statistics profile object will be committed to the line cards. | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.10 | TruthValue | read-create | current |
| juniQosStatisticsProfileIsReferencedByQosProfile OBJECT-TYPE True if the statistics profile is referenced by QoS profile(s). | 1.3.6.1.4.1.4874.2.2.57.1.15.2.1.11 | TruthValue | read-only | current |
| juniQosQosModePortList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.16 | |||
| juniQosQosModePortTable OBJECT-TYPE This table contains entries for elements of QoS mode port definitions. | 1.3.6.1.4.1.4874.2.2.57.1.16.1 | not-accessible | current | |
| juniQosQosModePortEntry OBJECT-TYPE Each entry describes the characteristics of a QoS mode port element. | 1.3.6.1.4.1.4874.2.2.57.1.16.1.1 | not-accessible | current | |
| juniQosQosModePortIndex OBJECT-TYPE The ATM port interface for which this row defines QoS mode port settings. | 1.3.6.1.4.1.4874.2.2.57.1.16.1.1.1 | Unsigned32 | not-accessible | current |
| juniQosQosModePortRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosQosModePortRowStatus juniQosQosModePortFrameMode | 1.3.6.1.4.1.4874.2.2.57.1.16.1.1.2 | RowStatus | read-create | current |
| juniQosQosModePortFrameMode OBJECT-TYPE Specifies the frame mode for this ATM port interface. lowCdv mode can not be configured unless juniQosQosShapingModeShapingMode for the ATM port interface is configured as 'cell'. | 1.3.6.1.4.1.4874.2.2.57.1.16.1.1.3 | INTEGER {lowCdv(0), lowLatency(1)} | read-create | current |
| juniQosQosShapingModeList OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.17 | |||
| juniQosQosShapingModeTable OBJECT-TYPE This table contains entries for elements of QoS shaping mode definitions. | 1.3.6.1.4.1.4874.2.2.57.1.17.1 | not-accessible | current | |
| juniQosQosShapingModeEntry OBJECT-TYPE Each entry describes the characteristics of a QoS shaping mode element. | 1.3.6.1.4.1.4874.2.2.57.1.17.1.1 | not-accessible | current | |
| juniQosQosShapingModeIndex OBJECT-TYPE The ATM port interface for which this row defines QoS shaping mode port settings. | 1.3.6.1.4.1.4874.2.2.57.1.17.1.1.1 | Unsigned32 | not-accessible | current |
| juniQosQosShapingModeRowStatus OBJECT-TYPE Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniQosQosShapingModeRowStatus juniQosQosShapingModeShapingMode | 1.3.6.1.4.1.4874.2.2.57.1.17.1.1.2 | RowStatus | read-create | current |
| juniQosQosShapingModeShapingMode OBJECT-TYPE Specifies the QoS shaping mode for this ATM port interface. 'frame' indicates shaping is to be based on frames, not including cell encapsulation and padding. 'cell' indicates shaping is to be based on cells, with cell encapsulation and padding included. 'frame' mode can not be configured unless juniQosQosModePortFrameMode for the ATM port interface is configured as 'lowLatency'. | 1.3.6.1.4.1.4874.2.2.57.1.17.1.1.3 | INTEGER {frame(0), cell(1)} | read-create | current |
| juniQosSVlanUidSupport OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.18 | |||
| juniQosSVlanUidTable OBJECT-TYPE This table contains an entry for each possible stacked vlan UID. | 1.3.6.1.4.1.4874.2.2.57.1.18.1 | not-accessible | current | |
| juniQosSVlanUidTableEntry OBJECT-TYPE Each entry is a stacked vlan UID. | 1.3.6.1.4.1.4874.2.2.57.1.18.1.1 | not-accessible | current | |
| juniQosSVlanUidTablePortUid OBJECT-TYPE The UID of the Ethernet port on which the stacked vlan is defined | 1.3.6.1.4.1.4874.2.2.57.1.18.1.1.1 | Unsigned32 | not-accessible | current |
| juniQosSVlanUidTableSVlanId OBJECT-TYPE The stacked vlan ID | 1.3.6.1.4.1.4874.2.2.57.1.18.1.1.2 | Unsigned32 (0..4095) | not-accessible | current |
| juniQosSVlanUidTableSVlanUid OBJECT-TYPE The stacked vlan UID | 1.3.6.1.4.1.4874.2.2.57.1.18.1.1.3 | Unsigned32 | read-only | current |
| juniQosSVlanIdSupport OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.1.19 | |||
| juniQosSVlanIdTable OBJECT-TYPE This table contains an entry for each possible Ethernet port/stacked vlan id. | 1.3.6.1.4.1.4874.2.2.57.1.19.1 | not-accessible | current | |
| juniQosSVlanIdTableEntry OBJECT-TYPE Each entry is a stacked vlan Ethernet port/stacked vlan ID. | 1.3.6.1.4.1.4874.2.2.57.1.19.1.1 | not-accessible | current | |
| juniQosSVlanIdTableSVlanUid OBJECT-TYPE The stacked vlan UID | 1.3.6.1.4.1.4874.2.2.57.1.19.1.1.1 | Unsigned32 | not-accessible | current |
| juniQosSVlanIdTablePortUid OBJECT-TYPE The UID of the Ethernet port on which the stacked vlan is defined | 1.3.6.1.4.1.4874.2.2.57.1.19.1.1.2 | Unsigned32 | read-only | current |
| juniQosSVlanIdTableSVlanId OBJECT-TYPE The stacked vlan ID | 1.3.6.1.4.1.4874.2.2.57.1.19.1.1.3 | Unsigned32 (0..4095) | read-only | current |
| juniQosConformance OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.2 | |||
| juniQosCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.2.1 | |||
| juniQosGroups OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.57.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| juniQosCompliance MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper QoS management MIB. This statement became obsolete when drop profile list support was added. | 1.3.6.1.4.1.4874.2.2.57.2.1.1 | obsolete |
| juniQosCompliance2 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper QoS management MIB. This statement became obsolete when ATM VP UID, statistics profile list and QoS mode port support was added. | 1.3.6.1.4.1.4874.2.2.57.2.1.2 | obsolete |
| juniQosCompliance3 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper QoS management MIB. This statement became obsolete when multiple traffic class group support was added. | 1.3.6.1.4.1.4874.2.2.57.2.1.3 | obsolete |
| juniQosCompliance4 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper QoS management MIB. | 1.3.6.1.4.1.4874.2.2.57.2.1.4 | obsolete |
| juniQosCompliance5 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper QoS management MIB. | 1.3.6.1.4.1.4874.2.2.57.2.1.5 | current |
| juniQosCompliance6 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper QoS management MIB. | 1.3.6.1.4.1.4874.2.2.57.2.1.6 | current |
| juniQosCapabilityGroup OBJECT-GROUP This group defines QoS application-wide capabilities management. | 1.3.6.1.4.1.4874.2.2.57.2.2.1 | current |
| juniQosScalarGroup OBJECT-GROUP This obsolete group defines QoS application-wide counters. This group became obsolete when drop profile list support was added. | 1.3.6.1.4.1.4874.2.2.57.2.2.2 | obsolete |
| juniQosTrafficClassListGroup OBJECT-GROUP This group defines QoS traffic class management. | 1.3.6.1.4.1.4874.2.2.57.2.2.3 | current |
| juniQosTrafficClassGroupListGroup OBJECT-GROUP This obsolete group defines QoS traffic class group management. This group became obsolete when multiple traffic class group support was added. | 1.3.6.1.4.1.4874.2.2.57.2.2.4 | obsolete |
| juniQosQueueProfileListGroup OBJECT-GROUP This group defines QoS queue profile management. | 1.3.6.1.4.1.4874.2.2.57.2.2.5 | current |
| juniQosSchedulerProfileListGroup OBJECT-GROUP This obsolete group defines QoS scheduler profile management. This group became obsolete when assured rate support was added. | 1.3.6.1.4.1.4874.2.2.57.2.2.6 | obsolete |
| juniQosProfileListGroup OBJECT-GROUP This group defines QoS profile management. | 1.3.6.1.4.1.4874.2.2.57.2.2.7 | current |
| juniQosProfileElementGroup OBJECT-GROUP This obsolete group defines QoS profile element entry management. This group became obsolete when drop profile list support was added. | 1.3.6.1.4.1.4874.2.2.57.2.2.8 | obsolete |
| juniQosIfAttachGroup OBJECT-GROUP This group defines QoS interface attachment management. | 1.3.6.1.4.1.4874.2.2.57.2.2.9 | current |
| juniQosQosPortTypeProfileGroup OBJECT-GROUP This group defines QoS default port profile management. | 1.3.6.1.4.1.4874.2.2.57.2.2.10 | current |
| juniQosQueueStatisticsGroup OBJECT-GROUP This group defines QoS queue statistics reporting. | 1.3.6.1.4.1.4874.2.2.57.2.2.11 | current |
| juniQosScalarGroup2 OBJECT-GROUP This obsolete group defines QoS application-wide counters. This group became obsolete when statistics profile list support was added. | 1.3.6.1.4.1.4874.2.2.57.2.2.12 | obsolete |
| juniQosProfileElementGroup2 OBJECT-GROUP This obsolete group defines QoS profile element entry management. This group became obsolete when statistics profile list support was added. | 1.3.6.1.4.1.4874.2.2.57.2.2.13 | obsolete |
| juniQosDropProfileListGroup OBJECT-GROUP This group defines QoS drop profile management. | 1.3.6.1.4.1.4874.2.2.57.2.2.14 | current |
| juniQosAtmVpUidSupportGroup OBJECT-GROUP This group defines QoS ATM VP UID support. | 1.3.6.1.4.1.4874.2.2.57.2.2.15 | current |
| juniQosScalarGroup3 OBJECT-GROUP This group defines QoS application-wide counters. | 1.3.6.1.4.1.4874.2.2.57.2.2.16 | current |
| juniQosProfileElementGroup3 OBJECT-GROUP This group defines QoS profile element entry management. | 1.3.6.1.4.1.4874.2.2.57.2.2.17 | current |
| juniQosStatisticsProfileListGroup OBJECT-GROUP This group defines QoS statistics profile management. | 1.3.6.1.4.1.4874.2.2.57.2.2.18 | current |
| juniQosSchedulerProfileListGroup2 OBJECT-GROUP This group defines QoS scheduler profile management. | 1.3.6.1.4.1.4874.2.2.57.2.2.19 | current |
| juniQosQosModePortGroup OBJECT-GROUP This group defines QoS mode port management. | 1.3.6.1.4.1.4874.2.2.57.2.2.20 | current |
| juniQosQosShapingModeGroup OBJECT-GROUP This group defines QoS shaping mode management. | 1.3.6.1.4.1.4874.2.2.57.2.2.21 | current |
| juniQosTrafficClassGroupListGroup2 OBJECT-GROUP This group defines QoS traffic class group management. | 1.3.6.1.4.1.4874.2.2.57.2.2.22 | current |
| juniQosSchedulerProfileListGroup3 OBJECT-GROUP This group defines QoS scheduler profile management. | 1.3.6.1.4.1.4874.2.2.57.2.2.23 | current |
| juniQosSchedulerProfileListGroup4 OBJECT-GROUP This group defines QoS scheduler profile management. | 1.3.6.1.4.1.4874.2.2.57.2.2.24 | current |
| juniQosSVlanUidSupportGroup OBJECT-GROUP This group defines QoS stacked vlan UID listing support. | 1.3.6.1.4.1.4874.2.2.57.2.2.25 | current |
| juniQosSVlanIdSupportGroup OBJECT-GROUP This group defines QoS stacked vlan port/id listing support. | 1.3.6.1.4.1.4874.2.2.57.2.2.26 | current |