MIBs Depot

Juniper-PIM-MIB

Registered at
1.3.6.1.4.1.4874.2.2.43
Last updated
2002-09-16 21:44
Organization
Juniper Networks, Inc.
Revisions
2002-09-16 21:44, 2001-03-19 15:37
Namespace
juniper
Source file
Juniper-PIM-MIB
Digest
sha256:87523f653ba22cc0f43bcbbf0bc6304b6766efa10fa18d842240c4852698b208

Description

The enterprise MIB module for management of PIM routers.

Contact

Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net

Imports

FromSymbols
IF-MIBInterfaceIndex
Juniper-MIBsjuniMibs
PIM-MIBpimInterfaceIfIndex, pimRPSetAddress, pimRPSetComponent, pimRPSetGroupAddress, pimRPSetGroupMask
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANA-RTPROTO-MIB
IANAifType-MIB
IF-MIB
IPMROUTE-STD-MIB
Juniper-MIBs
Juniper-PIM-MIB
Juniper-UNI-SMI
PIM-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JuniPimType
TEXTUAL-CONVENTION
This data type is used do identify Sparse mode and Dense mode PIM protocol.
current

Objects

NameOIDSyntaxAccessStatus
juniPimMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.43.1
juniPimTraps
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.43.1.0
juniPimGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.43.1.1
juniPimNumHelloRcvd
OBJECT-TYPE
Total number of Hellos received by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.1Integer32read-onlycurrent
juniPimNumJoinPruneRcvd
OBJECT-TYPE
Total number of JoinPrunes received by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.2Integer32read-onlycurrent
juniPimNumAssertRcvd
OBJECT-TYPE
Total number of Asserts received by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.3Integer32read-onlycurrent
juniPimNumGraftRcvd
OBJECT-TYPE
Total number of Grafts received by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.4Integer32read-onlycurrent
juniPimNumGraftAckRcvd
OBJECT-TYPE
Total number of Graft Acks received by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.5Integer32read-onlycurrent
juniPimNumHelloSent
OBJECT-TYPE
Total number of Hellos sent by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.6Integer32read-onlycurrent
juniPimNumJoinPruneSent
OBJECT-TYPE
Total number of JoinPrunes sent by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.7Integer32read-onlycurrent
juniPimNumAssertSent
OBJECT-TYPE
Total number of Asserts sent by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.8Integer32read-onlycurrent
juniPimNumGraftSent
OBJECT-TYPE
Total number of Grafts sent by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.9Integer32read-onlycurrent
juniPimNumGraftAckSent
OBJECT-TYPE
Total number of Graft Acks sent by PIM on this router.
1.3.6.1.4.1.4874.2.2.43.1.1.10Integer32read-onlycurrent
juniPimInterfaceTable
OBJECT-TYPE
The (conceptual) table listing enterprise specific information on a subset of the rows of the pimInterfaceTable defined in the standard PIM MIB.
1.3.6.1.4.1.4874.2.2.43.1.1.11not-accessiblecurrent
juniPimInterfaceEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimInterfaceTable. There is one entry per entry in the pimInterfaceTable.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1not-accessiblecurrent
juniPimIntfNumHelloRcvd
OBJECT-TYPE
Total number of Hellos received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.1Integer32read-writecurrent
juniPimIntfNumJoinPruneRcvd
OBJECT-TYPE
Total number of JoinPrunes received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.2Integer32read-writecurrent
juniPimIntfNumAssertRcvd
OBJECT-TYPE
Total number of Asserts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.3Integer32read-writecurrent
juniPimIntfNumGraftRcvd
OBJECT-TYPE
Total number of Grafts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.4Integer32read-writecurrent
juniPimIntfNumGraftAckRcvd
OBJECT-TYPE
Total number of Graft Acks received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.5Integer32read-writecurrent
juniPimIntfNumHelloSent
OBJECT-TYPE
Total number of Hellos sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.6Integer32read-writecurrent
juniPimIntfNumJoinPruneSent
OBJECT-TYPE
Total number of JoinPrunes sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.7Integer32read-writecurrent
juniPimIntfNumAssertSent
OBJECT-TYPE
Total number of Asserts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.8Integer32read-writecurrent
juniPimIntfNumGraftSent
OBJECT-TYPE
Total number of Grafts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.9Integer32read-writecurrent
juniPimIntfNumGraftAckSent
OBJECT-TYPE
Total number of Graft Acks sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.10Integer32read-writecurrent
juniPimIntfVersion
OBJECT-TYPE
The version of PIM running on this interface.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.11INTEGER (1..2147483647)read-onlycurrent
juniPimIntfNumNbrs
OBJECT-TYPE
Number of PIM neighbors detected on this interface.
1.3.6.1.4.1.4874.2.2.43.1.1.11.1.12Integer32read-onlycurrent
juniPimMRouteTable
OBJECT-TYPE
The (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> states.
1.3.6.1.4.1.4874.2.2.43.1.1.12not-accessiblecurrent
juniPimMRouteEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimMRouteTable.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1not-accessiblecurrent
juniPimMRouteGroup
OBJECT-TYPE
The group address. Specified as 224.0.0.0 for <*, *, RP> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.1IpAddressnot-accessiblecurrent
juniPimMRouteSource
OBJECT-TYPE
The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.2IpAddressnot-accessiblecurrent
juniPimMRouteSourceMask
OBJECT-TYPE
The source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.3IpAddressnot-accessiblecurrent
juniPimMRouteRPAddress
OBJECT-TYPE
The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.4IpAddressnot-accessiblecurrent
juniPimMRouteUpstreamAssertTimer
OBJECT-TYPE
The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.5TimeTicksread-onlycurrent
juniPimMRouteAssertMetric
OBJECT-TYPE
The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.6Integer32read-onlycurrent
juniPimMRouteAssertPref
OBJECT-TYPE
The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.7Integer32read-onlycurrent
juniPimMRouteAssertRPTBit
OBJECT-TYPE
The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.8TruthValueread-onlycurrent
juniPimMRouteBits
OBJECT-TYPE
This object describes whether the entry is on shared tree (RPT) or shortest path tree (SPT).
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.9Bits {rpt(0), spt(1)}read-onlycurrent
juniPimMRouteRPAddrInUse
OBJECT-TYPE
The RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries. Set to 0.0.0.0 for <S, G> entries on shortest path tree.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.10IpAddressread-onlycurrent
juniPimMRouteUpstreamNbr
OBJECT-TYPE
The address of upstream neighbor being used for the entry. Its set to 0.0.0.0 if the router is directly attached to source on one of its interface.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.11IpAddressread-onlycurrent
juniPimMRouteIifAddr
OBJECT-TYPE
The address of incoming interface for this entry.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.12IpAddressread-onlycurrent
juniPimMRouteIsWaitingToSwitchToSPT
OBJECT-TYPE
This object describes whether the entry is still waiting to switch completely to shortest path tree in case of <S, G> entries. It waits to do this till it receives first packet from incoming interface towards shortest path tree.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.13TruthValueread-onlycurrent
juniPimMRouteEntryExpiryTimer
OBJECT-TYPE
The time after which the entry timer expires for this entry. Set to 0 if entry timer is not active.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.14TimeTicksread-onlycurrent
juniPimMRouteSenderDRAddr
OBJECT-TYPE
The address of the designated router on the sender's subnet in case of <S, G> entries. The sender designated router register encapsulates data to RP. Set to 0.0.0.0 for <*, G> and <*, *, RP> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.15IpAddressread-onlycurrent
juniPimMRouteRouteAddr
OBJECT-TYPE
The address of the route being used to do RPF check for this entry. It is set to 0.0.0.0 (with juniPimMRouteRouteMask set to 255.255.255.255) if there is no route available.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.16IpAddressread-onlycurrent
juniPimMRouteRouteMask
OBJECT-TYPE
The mask of the route being used to do RPF check for this entry. It is set to 255.255.255.255 (with juniPimMRouteRoute set to 0.0.0.0) if there is no route available.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.17IpAddressread-onlycurrent
juniPimMRouteGRPAddr
OBJECT-TYPE
The address of the group-to-RP mapping being used to get the RP for this entry. It is set to 0.0.0.0 (with juniPimMRouteGRPMask set to 0.0.0.0) if there is no group-to-RP mapping available or if entry is <*, *, RP>.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.18IpAddressread-onlycurrent
juniPimMRouteGRPMask
OBJECT-TYPE
The mask of the group-to-RP mapping being used to get the RP for this entry. It is set to 255.255.255.255 (with juniPimMRouteGRPAddr set to 0.0.0.0) if there is no group-to-RP mapping available or if entry is <*, *, RP>.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.19IpAddressread-onlycurrent
juniPimMRouteOtherProtoOifJoinTypeAll
OBJECT-TYPE
This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving all data. This will be particularly true for dense mode protocols which would want all data (<*, *>) from PIM sparse mode protocol.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.20TruthValueread-onlycurrent
juniPimMRouteOtherProtoOifJoinTypeG
OBJECT-TYPE
This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a given group. This will be particularly true for IGMP which would want data for a given group (<*, G>) from PIM protocol.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.21TruthValueread-onlycurrent
juniPimMRouteOtherProtoOifJoinTypeSG
OBJECT-TYPE
This object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a given <source, group>. This will be particularly true for IGMPv3 which would want data for a given <source, group (<S, G>) from PIM sparse-mode protocol.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.22TruthValueread-onlycurrent
juniPimMRoutePimType
OBJECT-TYPE
This object indicates if the owner of this entry is Sparse mode or Dense mode PIM. Owner is usually determined by the protocol running on the incoming interface of the entry. In case sparse-dense mode PIM is running on the incoming interface, sparse-mode is the owner if RP for the group is known, else dense mode is the owner.
1.3.6.1.4.1.4874.2.2.43.1.1.12.1.23JuniPimTyperead-onlycurrent
juniPimMRouteNextHopTable
OBJECT-TYPE
The (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces.
1.3.6.1.4.1.4874.2.2.43.1.1.13not-accessiblecurrent
juniPimMRouteNextHopEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimMRouteNextHopTable.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1not-accessiblecurrent
juniPimMRouteNextHopGroupAddr
OBJECT-TYPE
The group address. Specified as 224.0.0.0 for <*, *, RP> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.2IpAddressnot-accessiblecurrent
juniPimMRouteNextHopSrcAddr
OBJECT-TYPE
The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.3IpAddressnot-accessiblecurrent
juniPimMRouteNextHopSrcMask
OBJECT-TYPE
The source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.4IpAddressnot-accessiblecurrent
juniPimMRouteNextHopRPAddr
OBJECT-TYPE
The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.5IpAddressnot-accessiblecurrent
juniPimMRouteNextHopIfId
OBJECT-TYPE
The interface index of the outgoing interface (next hop). Specified as 0 for register outgoing interface. Register outgoing interfaces are created by DR on the source subnet to send PIM register encapsulated data (as unicast) to RP. It is also used by PIM boundary routers (PMBRs) to register data to RP.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.6InterfaceIndexnot-accessiblecurrent
juniPimMRouteNextHopAddress
OBJECT-TYPE
This object takes following different values based on the type of next hop. It should be set to the address of RP in case the next hop interface is register interface i.e. juniPimMRouteNextHopIfId object is set to 0. It should be set to the address of neighbor in case the interface is an NBMA interface. In all other cases it should be set to the group address itself.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.7IpAddressnot-accessiblecurrent
juniPimMRouteNextHopPruneReason
OBJECT-TYPE
This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.8INTEGER {other(1), prune(2), assert(3)}read-onlycurrent
juniPimMRouteNextHopJoinTypeSSRP
OBJECT-TYPE
This object indicates whether or not the interface was added as a result of receiving <*, *, RP> join in case of <*, *, RP> entry OR inherited as outgoing interface from corresponding <*, *, RP> entry in case of <*, G> entry.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.9TruthValueread-onlycurrent
juniPimMRouteNextHopJoinTypeG
OBJECT-TYPE
This object indicates whether or not the interface was added as a result of receiving <*, G> join in case of <*, G> entry OR inherited as outgoing interface from corresponding <*, G> entry in case of <S, G> entry.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.10TruthValueread-onlycurrent
juniPimMRouteNextHopJoinTypeSG
OBJECT-TYPE
This object indicates whether or not the interface was added as a result of receiving <S, G> join in case of <S, G> entry.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.11TruthValueread-onlycurrent
juniPimMRouteNextHopHasLGM
OBJECT-TYPE
This object indicates whether or not the interface has local group membership (as indicated by IGMP) in case of <*, G> and <S, G> entries.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.12TruthValueread-onlycurrent
juniPimMRouteNextHopHasOifAW
OBJECT-TYPE
This object indicates whether or not this interface is the winner of assert for corresponding <*, G>/<S, G> entry.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.13TruthValueread-onlycurrent
juniPimMRouteNextHopHasOifSendAssert
OBJECT-TYPE
This object indicates whether or not this interface is going to send an assert at the end of assert suppression interval. Assert suppression is used to prevent a flood of assert to be generated in response to data or other asserts.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.14TruthValueread-onlycurrent
juniPimMRouteNextHopHasOifRegister
OBJECT-TYPE
This object indicates whether or not this next hop is a register outgoing interface.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.15TruthValueread-onlycurrent
juniPimMRouteNextHopHasOifBorderBit
OBJECT-TYPE
This object is used to describe a register outgoing interface. It indicates whether or not the border bit is set in the register packet when the packet is sent over the register interface. For all other (non-register) interfaces its set to false.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.16TruthValueread-onlycurrent
juniPimMRouteNextHopHasOifNullEncapsBit
OBJECT-TYPE
This object is used to describe a register outgoing interface. It indicates whether or not the NULL encapsulation bit is set (periodically) in the register packet when the packet is sent over the register interface. For all other (non-register) interfaces its set to false.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.17TruthValueread-onlycurrent
juniPimMRouteNextHopJoinEndTimer
OBJECT-TYPE
This object indicates the time (in seconds) left when the join timer expires for the outgoing interface. Join timer for an outgoing interface of <S, G> entry indicates when the <S, G> join expires, for a <*, G> entry indicates when the <*, G> join expires and for a <*, *, RP> entry indicates when the <*, *, RP> join expires. Inherited joins (like <S, G> inheriting from <*, G> AND <*, G> inheriting from <*, *, RP>) expire when the corresponding parent join expires.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.18TimeTicksread-onlycurrent
juniPimMRouteNextHopAssertEndTimer
OBJECT-TYPE
This object indicates the time (in seconds) left when the assert timer expires on this outgoing inteface.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.19TimeTicksread-onlycurrent
juniPimMRouteNextHopNextAssertTimer
OBJECT-TYPE
This object indicates the duration (in seconds) left for which sending an assert has been suppressed on this outgoing interface.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.20TimeTicksread-onlycurrent
juniPimMRouteNextHopAssertSrcAddress
OBJECT-TYPE
This object indicates the source address which will be used in the assert packet to send an assert out for the entry on this outgoing interface. For <S, G> entries it is the address of the source S itself. For <*, G> entries it is the address of the source whose data was forwarded using this <*, G> and caused the assert situation to happen.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.21IpAddressread-onlycurrent
juniPimMRouteNextHopRegisterSuppressionTimer
OBJECT-TYPE
This object is used for register outgoing interfaces. It indicates the duration (in seconds) left for which sending a register packet has been suppressed on the register outgoing interface as a result of receiving register-stop from the RP.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.22TimeTicksread-onlycurrent
juniPimMRouteNextHopPimType
OBJECT-TYPE
This object indicates whether the outgoing interface was contributed by sparse-mode or dense-mode PIM.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.23JuniPimTyperead-onlycurrent
juniPimMRouteNextHopPruneTimeLeft
OBJECT-TYPE
This object indicates the time (in seconds) left when the prune timer expires on an outgoing inteface. Its used for pruned outgoing interfaces contributed by dense-mode PIM.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.24TimeTicksread-onlycurrent
juniPimMRouteNextHopsendingIpAddress
OBJECT-TYPE
This object describes the source IP address used by this interface to send PIM packets out on this outgoing interface.
1.3.6.1.4.1.4874.2.2.43.1.1.13.1.25IpAddressread-onlycurrent
juniPimRPSetTable
OBJECT-TYPE
The (conceptual) table listing enterprise specific information on a subset of the rows of the pimRPSetTable defined in the standard PIM MIB.
1.3.6.1.4.1.4874.2.2.43.1.1.14not-accessiblecurrent
juniPimRPSetEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimRPSetTable.
1.3.6.1.4.1.4874.2.2.43.1.1.14.1not-accessiblecurrent
juniPimRPSetPriority
OBJECT-TYPE
This object describes the priority of the RP for this group-to-RP mapping.
1.3.6.1.4.1.4874.2.2.43.1.1.14.1.1Integer32 (1..65535)read-onlycurrent
juniPimRPSetTypeInfo
OBJECT-TYPE
This object describes the mechanism by which this group to RP mapping has been learnt, i.e. whether its statically configured, AutoRP learnt or BSR learnt. It also indicates whether the mapping is positive or negative. Negative mappings force the groups in that range to fall into dense-mode category if sparse-dense mode is configured or no RP if its purely sparse mode configuration.
1.3.6.1.4.1.4874.2.2.43.1.1.14.1.2INTEGER {pimRPTypeInvalid(0), pimRPTypeStatic(1), pimRPTypeStaticOverride(2), pimRPTypeAutoRP(3), pimRPTypeBSR(4), pimRPTypeStaticNegative(5), pimRPTypeStaticOverrideNegative(6), pimRPTypeAutoRPNegative(7), pimRPTypeBSRNegative(8)}read-onlycurrent
juniPimRPSetAccessListName
OBJECT-TYPE
This object lists the name of the access list from which this group-to-RP mapping was picked up in case of statically configured RPs.
1.3.6.1.4.1.4874.2.2.43.1.1.14.1.3OCTET STRING (SIZE(0..32))read-onlycurrent
juniPimStaticRPConfTable
OBJECT-TYPE
The (conceptual) table listing statically configured PIM RPs.
1.3.6.1.4.1.4874.2.2.43.1.1.15not-accessiblecurrent
juniPimStaticRPConfEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimStaticRPConfTable.
1.3.6.1.4.1.4874.2.2.43.1.1.15.1not-accessiblecurrent
juniPimStaticRPConfComponentIndex
OBJECT-TYPE
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
1.3.6.1.4.1.4874.2.2.43.1.1.15.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniPimStaticRPConfRPAddr
OBJECT-TYPE
Ip address of the RP which for the group-to-RP mapping being configured.
1.3.6.1.4.1.4874.2.2.43.1.1.15.1.2IpAddressnot-accessiblecurrent
juniPimStaticRPConfAccessListName
OBJECT-TYPE
Name of the access list from which group-ranges are picked up for this group-ro-RP mapping. Every deny component in the list is added as negative group-ro-RP mapping.
1.3.6.1.4.1.4874.2.2.43.1.1.15.1.3OCTET STRING (SIZE(0..32))not-accessiblecurrent
juniPimStaticRPConfRowStatus
OBJECT-TYPE
The status of this row, by which new entries may be created, or old entries deleted from this table.
1.3.6.1.4.1.4874.2.2.43.1.1.15.1.4RowStatusread-createcurrent
juniPimStaticRPConfOverride
OBJECT-TYPE
The object indicates whether or not this statically configured group-to-RP mapping should override the group-to-RP mapping learnt via AutoRP for the component group-ranges in the access list. By default AutoRP learnt group-to-RP mappings are preferred over statically configured ones. While setting the rowStatus to create a static RP, this field should be assigned to true if the override property is desired.
1.3.6.1.4.1.4874.2.2.43.1.1.15.1.5TruthValueread-createcurrent
juniPimAutoRPConfTable
OBJECT-TYPE
The (conceptual) table allowing AutoRP configuration of candidate RPs (advertisement agents).
1.3.6.1.4.1.4874.2.2.43.1.1.16not-accessiblecurrent
juniPimAutoRPConfEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimAutoRPConfTable.
1.3.6.1.4.1.4874.2.2.43.1.1.16.1not-accessiblecurrent
juniPimAutoRPConfComponentIndex
OBJECT-TYPE
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
1.3.6.1.4.1.4874.2.2.43.1.1.16.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniPimAutoRPConfCandRPAddr
OBJECT-TYPE
The IP address of the candidate RP for this advertising agent configuration.
1.3.6.1.4.1.4874.2.2.43.1.1.16.1.2IpAddressnot-accessiblecurrent
juniPimAutoRPConfGroupAccessListName
OBJECT-TYPE
The access list name from which group ranges are picked up for advertising agent configuration.
1.3.6.1.4.1.4874.2.2.43.1.1.16.1.3OCTET STRING (SIZE(0..32))not-accessiblecurrent
juniPimAutoRPConfRowStatus
OBJECT-TYPE
The status of this row, by which new entries may be created, or old entries deleted from this table.
1.3.6.1.4.1.4874.2.2.43.1.1.16.1.4RowStatusread-createcurrent
juniPimAutoRPConfTTL
OBJECT-TYPE
The time-to-live value used while sending AutoRP advertisement out for this group-to-RP mappings created as a result of this configuration. This should be set along with juniPimAutoRPConfRowStatus while creating an AutoRP advertising agent to denote the TTL value to be used.
1.3.6.1.4.1.4874.2.2.43.1.1.16.1.5Integer32 (1..65535)read-createcurrent
juniPimAutoRPConfAncmntIntvl
OBJECT-TYPE
The time interval at which AutoRP advertisements are sent out for the group-to-RP mappings created as a result of this configuration. This should be set along with juniPimAutoRPConfRowStatus while creating an AutoRP advertising agent to denote the announcement interval to be used.
1.3.6.1.4.1.4874.2.2.43.1.1.16.1.6TimeTicksread-createcurrent
juniPimAutoRPConfifId
OBJECT-TYPE
The interface index of the interface for the candidate RP if an interface with that address exists else it is set to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.16.1.7InterfaceIndexread-onlycurrent
juniPimAutoRPCandTable
OBJECT-TYPE
The (conceptual) table listing AutoRP candidate RPS (advertising agents).
1.3.6.1.4.1.4874.2.2.43.1.1.17not-accessiblecurrent
juniPimAutoRPCandEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimAutoRPCandTable.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1not-accessiblecurrent
juniPimAutoRPCandComponentIndex
OBJECT-TYPE
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniPimAutoRPCandRPAddr
OBJECT-TYPE
The IP address of the candidate RP for this group-to-RP mapping.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.2IpAddressnot-accessiblecurrent
juniPimAutoRPCandGroupAddr
OBJECT-TYPE
The group address of the candidate RP for this group-to-RP mapping.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.3IpAddressnot-accessiblecurrent
juniPimAutoRPCandGroupMask
OBJECT-TYPE
The group mask of the candidate RP for this group-to-RP mapping.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.4IpAddressnot-accessiblecurrent
juniPimAutoRPCandRowStatus
OBJECT-TYPE
The current status of this row.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.5RowStatusread-onlycurrent
juniPimAutoRPCandAccessListName
OBJECT-TYPE
The name of the group list using which this AutoRP group-to-RP candidate RP mapping was configured.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.6OCTET STRING (SIZE(0..32))read-onlycurrent
juniPimAutoRPCandAutoRPTTL
OBJECT-TYPE
The time-to-live value used while sending AutoRP advertisement out for this group-to-RP mapping.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.7Integer32 (1..65535)read-onlycurrent
juniPimAutoRPCandAutoRPAncmntIntvl
OBJECT-TYPE
The time interval at which AutoRP advertisements are sent out for this group-to-RP mapping.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.8TimeTicksread-onlycurrent
juniPimAutoRPCandIfId
OBJECT-TYPE
The interface index of the interface for this AutoRP group-to-RP candidate RP mapping if an interface for RP address exists else it is set to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.17.1.9InterfaceIndexread-onlycurrent
juniPimComponentTable
OBJECT-TYPE
The (conceptual) table listing each component (domain) in PIM.
1.3.6.1.4.1.4874.2.2.43.1.1.18not-accessiblecurrent
juniPimComponentEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimComponentTable.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1not-accessiblecurrent
juniPimComponentIndex
OBJECT-TYPE
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniPimComponentAutoRPMappingAgentRowStatus
OBJECT-TYPE
The status of AutoRP mapping agent by which this router can be made an AutoRP mapping agent or removed from being an AutoRP mapping agent in this component.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1.2RowStatusread-createcurrent
juniPimComponentConfiguredAutoRPMappingAgentIfId
OBJECT-TYPE
The interface index of the interface which mapping agent should use to send AutoRP mapping messages. If not specified, the interface with highest IP address in this domain is picked up for this purpose.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1.3InterfaceIndexread-createcurrent
juniPimComponentAutoRPMappingAgentInterval
OBJECT-TYPE
The time interval at which AutoRP mapping messages are sent out in this component. The default value is 60 seconds.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1.4TimeTicksread-createcurrent
juniPimComponentAutoRPMappingTTL
OBJECT-TYPE
The time-to-live value used while sending AutoRP mapping messages out in this component.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1.5Integer32 (1..65535)read-createcurrent
juniPimComponentAutoRPMappingAgentIntfAddr
OBJECT-TYPE
The IP address of the interface which mapping agent is using to send AutoRP mapping messages.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1.6IpAddressread-onlycurrent
juniPimComponentAutoRPMappingAgentWinnerAddr
OBJECT-TYPE
The IP address of the winner AutoRP mapping agent. There can be multiple mapping agents configured in a given PIM domain(component). The mapping agent with highest IP address is chosen as the winner and it continues to send AutoRP mapping messages. If the router itself is the winner, then this is set to 0.0.0.0.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1.7IpAddressread-onlycurrent
juniPimComponentAutoRPMappingAgentWinnerLastHeard
OBJECT-TYPE
The time (in seconds) that has past since an AutoRP mapping message was receieved from the winner AutoRP mapping agent. If the router itself is the winner, then this is set to 0.
1.3.6.1.4.1.4874.2.2.43.1.1.18.1.8TimeTicksread-onlycurrent
juniPimUnicastRouteTable
OBJECT-TYPE
The (conceptual) table listing all the unicast routes currently in use by PIM for diong RPF checking.
1.3.6.1.4.1.4874.2.2.43.1.1.19not-accessiblecurrent
juniPimUnicastRouteEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimUnicastRouteTable.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1not-accessiblecurrent
juniPimUnicastRouteEntryAddr
OBJECT-TYPE
The address of route in use.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1.1IpAddressnot-accessiblecurrent
juniPimUnicastRouteEntryMask
OBJECT-TYPE
The mask of route in use.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1.2IpAddressnot-accessiblecurrent
juniPimUnicastRouteEntryRpfNbr
OBJECT-TYPE
The RPF neighbor (next-hop) to reach the route of this entry. It is set to 0.0.0.0 for directly connected routes.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1.3IpAddressread-onlycurrent
juniPimUnicastRouteEntryIifId
OBJECT-TYPE
The interface index (next-hop) to reach the route of this entry.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1.4InterfaceIndexread-onlycurrent
juniPimUnicastRouteEntryIifAddr
OBJECT-TYPE
The interface address (next-hop) to reach the route of this entry.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1.5IpAddressread-onlycurrent
juniPimUnicastRouteEntryPref
OBJECT-TYPE
The preference of the route of this entry.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1.6Integer32read-onlycurrent
juniPimUnicastRouteEntryMetric
OBJECT-TYPE
The metric of the route of this entry.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1.7Integer32read-onlycurrent
juniPimUnicastRouteEntryPimType
OBJECT-TYPE
This object indicates whether the route specified in this entry is being used by sparse-mode and/or dense-mode PIM.
1.3.6.1.4.1.4874.2.2.43.1.1.19.1.8JuniPimTyperead-onlycurrent
juniPimSPTThresholdTable
OBJECT-TYPE
The (conceptual) table listing threshold values set for switching from shared tree to shortest path tree and vice versa for data forwarded by PIM sparse-mode.
1.3.6.1.4.1.4874.2.2.43.1.1.20not-accessiblecurrent
juniPimSPTThresholdEntry
OBJECT-TYPE
An entry (conceptual row) in the juniPimSPTThresholdTable.
1.3.6.1.4.1.4874.2.2.43.1.1.20.1not-accessiblecurrent
juniPimSPTThresholdAccessListName
OBJECT-TYPE
The name of the access list from which group ranges are picked up for setting SPT threshold in this entry.
1.3.6.1.4.1.4874.2.2.43.1.1.20.1.1OCTET STRING (SIZE(0..32))not-accessiblecurrent
juniPimSPTThresholdRowStatus
OBJECT-TYPE
The status of this row, by which new entries may be created, or old entries deleted from this table.
1.3.6.1.4.1.4874.2.2.43.1.1.20.1.2RowStatusread-writecurrent
juniPimSPTThresholdKbps
OBJECT-TYPE
The value of SPT threshold in kilobits per second. Default value is 0.
1.3.6.1.4.1.4874.2.2.43.1.1.20.1.3Integer32read-writecurrent
juniPimConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.43.2
juniPimCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.43.2.1
juniPimGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.43.2.2

Conformance

NameOIDStatus
juniPimCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the Juniper PIM MIB.
1.3.6.1.4.1.4874.2.2.43.2.1.1current
juniPimGeneralGroup
OBJECT-GROUP
A collection of objects for managing general PIM capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.1current
juniPimInterfaceGroup
OBJECT-GROUP
A collection of objects for managing PIM interface capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.2current
juniPimMRouteConfGroup
OBJECT-GROUP
A collection of objects for managing PIM multicast route capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.3current
juniPimMRouteNextHopGroup
OBJECT-GROUP
A collection of objects for managing PIM multicast route next hop capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.4current
juniPimRPSetGroup
OBJECT-GROUP
A collection of objects for managing PIM RP-Set capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.5current
juniPimStaticRPConfGroup
OBJECT-GROUP
A collection of objects for managing statically configured PIM RPs capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.6current
juniPimAutoRPConfGroup
OBJECT-GROUP
A collection of objects for managing PIM AutoRP candidate advertisment agent RP capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.7current
juniPimAutoRPCandGroup
OBJECT-GROUP
A collection of objects for managing PIM AutoRP candidate advertising agent RP capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.8current
juniPimComponentGroup
OBJECT-GROUP
A collection of objects for managing PIM component (domain) capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.9current
juniPimUnicastRouteGroup
OBJECT-GROUP
A collection of objects for managing PIM unicast route capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.10current
juniPimSPTThresholdGroup
OBJECT-GROUP
A collection of objects for managing PIM shortest path tree threshold capabilities in a Juniper product.
1.3.6.1.4.1.4874.2.2.43.2.2.11current