MIBs Depot

Juniper-L2TP-MIB

Registered at
1.3.6.1.4.1.4874.2.2.35
Last updated
2006-04-20 18:04
Organization
Juniper Networks, Inc.
Revisions
2006-04-20 18:04, 2005-08-24 16:00, 2005-04-11 18:22, 2004-09-02 23:47, 2004-05-04 14:31, 2004-03-08 18:04, 2004-03-08 18:04, 2003-02-13 21:12, 2003-02-12 21:03, 2003-02-07 22:26, 2001-10-17 14:51, 2001-10-17 13:55, 2001-06-18 20:00, 2000-02-11 00:00
Namespace
juniper
Source file
Juniper-L2TP-MIB
Digest
sha256:f5dd7ac7341c9c921866d507c58d59017d80bda8f31869bda5f3da8e664f92af

Description

The L2TP MIB for the Juniper Networks enterprise.

Contact

Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net

Imports

FromSymbols
IF-MIBInterfaceIndex, InterfaceIndexOrZero
Juniper-MIBsjuniMibs
Juniper-TCJuniEnable
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
Juniper-L2TP-MIB
Juniper-MIBs
Juniper-TC
Juniper-UNI-SMI
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JuniL2tpAdminState
TEXTUAL-CONVENTION
The administrative state exerted on L2TP tunnels sessions at some scope of control. enabled New tunnels/sessions may be instantiated. disabled All tunnels/sessions are terminated. drain No new tunnels/sessions may be instantiated, but any existing tunnels/sessions may persist until they expire by other means. The DESCRIPTION clause of an object defined to have this syntax must describe the scope of control that object exerts (e.g., all tunnels/sessions across the system, sessions within a single tunnel, etc.).
current
JuniL2tpLockoutAction
TEXTUAL-CONVENTION
The lockout action applied to an L2TP destinations. none No action test Test and unlock if successful unlock Unconditional unlock
current
JuniL2tpLockoutState
TEXTUAL-CONVENTION
The lockout state of an L2TP destination. notLocked not locked waitLockTimeout waiting for lockout timeout expiration waitTestStart waiting for lockout test start testing lockout test active
current
JuniL2tpSessionId
TEXTUAL-CONVENTION
An L2TP Session ID. Implementation constraints may restrict the range of values actually used.
current
JuniL2tpTransport
TEXTUAL-CONVENTION
Transport type over which L2TP is carried.
current
JuniL2tpTunnelId
TEXTUAL-CONVENTION
An L2TP Tunnel ID. Implementation constraints may restrict the range of values actually used.
current

Objects

NameOIDSyntaxAccessStatus
juniL2tpTraps
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.0
juniL2tpObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1
juniL2tpSystem
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.1
juniL2tpSystemConfig
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.1.1
juniL2tpSysConfigAdminState
OBJECT-TYPE
Exerts control over all L2TP tunnels/sessions in the system.
1.3.6.1.4.1.4874.2.2.35.1.1.1.1JuniL2tpAdminStateread-writecurrent
juniL2tpSysConfigDestructTimeout
OBJECT-TYPE
The amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics.
1.3.6.1.4.1.4874.2.2.35.1.1.1.2Integer32 (10..3600)read-writecurrent
juniL2tpSysConfigIpChecksumEnable
OBJECT-TYPE
Enable/disable IP checksumming for tunnels with UDP/IP transport.
1.3.6.1.4.1.4874.2.2.35.1.1.1.3JuniEnableread-writecurrent
juniL2tpSysConfigTunnelSwitchingEnabled
OBJECT-TYPE
Tunnel switching enabled/disable.
1.3.6.1.4.1.4874.2.2.35.1.1.1.4JuniEnableread-writecurrent
juniL2tpSysConfigControlRetransmissions
OBJECT-TYPE
The number of retransmission retries allowed before control connection goes down. This object has been replaced by juniL2tpSysConfigControlRetransmissionsEstablished and juniL2tpSysConfigControlRetransmissionsNotEstablished.
1.3.6.1.4.1.4874.2.2.35.1.1.1.5Integer32 (2..7)read-writedeprecated
juniL2tpSysConfigTunnelIdleTimeout
OBJECT-TYPE
Idle tunnel remains active for the specified amount of time; value 0 disables the timer i.e. tunnel becomes persistent.
1.3.6.1.4.1.4874.2.2.35.1.1.1.6Integer32 (0..86400)read-writecurrent
juniL2tpSysConfigReceiveDataSequencingIgnore
OBJECT-TYPE
Enable/disable ignoring of receive sequencing of L2TP data packets.
1.3.6.1.4.1.4874.2.2.35.1.1.1.7JuniEnableread-writecurrent
juniL2tpSysConfigFailoverWithinPreference
OBJECT-TYPE
Enable/disable fail-over within a preference level.
1.3.6.1.4.1.4874.2.2.35.1.1.1.8JuniEnableread-writecurrent
juniL2tpSysConfigWeightedLoadBalancing
OBJECT-TYPE
Enable/disable weighted load balancing.
1.3.6.1.4.1.4874.2.2.35.1.1.1.9JuniEnableread-writecurrent
juniL2tpSysConfigControlRetransmissionsEstablished
OBJECT-TYPE
It represents number of retries allowed for established tunnels before control connection goes down.
1.3.6.1.4.1.4874.2.2.35.1.1.1.10Integer32 (2..7)read-writecurrent
juniL2tpSysConfigControlRetransmissionsNotEstablished
OBJECT-TYPE
It represents number of retries allowed for unestablished tunnels before control connection goes down.
1.3.6.1.4.1.4874.2.2.35.1.1.1.11Integer32 (2..7)read-writecurrent
juniL2tpSysConfigDisableChallenge
OBJECT-TYPE
Disable inclusion of chap challenge in the outgoing packets.
1.3.6.1.4.1.4874.2.2.35.1.1.1.12JuniEnableread-writecurrent
juniL2tpSysConfigDisableCallingNumberAvp
OBJECT-TYPE
Enable/disable inclusion of calling number avp in ICRQ packet.
1.3.6.1.4.1.4874.2.2.35.1.1.1.13JuniEnableread-writecurrent
juniL2tpSysConfigIgnoreTxAddressChange
OBJECT-TYPE
Configure L2TP to ignore IP address and/or UDP port changes on incoming SCCRP messages. When this feature is enabled the L2TP tunnel may have separate receive and transmit address and/or port values to the remote host. disable(0) - change is not ignored ipAddressAndUdpPort(1)- ignore both address and port changes ipAddress(2) - ignore address changes only udpPort(3) - ignore port changes only.
1.3.6.1.4.1.4874.2.2.35.1.1.1.14INTEGER {disable(0), ipAddressAndUdpPort(1), ipAddress(2), udpPort(3)}read-writecurrent
juniL2tpSysConfigEnableDisconnectCauseAvp
OBJECT-TYPE
Enable/disable inclusion of L2TP PPP Disconnect Cause AVP in CDN packet.
1.3.6.1.4.1.4874.2.2.35.1.1.1.15JuniEnableread-writecurrent
juniL2tpSysConfigReceiveWindowSize
OBJECT-TYPE
Configure the global L2TP receive window size. A value of 0 indicates the system chooses the RWS. This object may be overwritten by other more specific RWS settings.
1.3.6.1.4.1.4874.2.2.35.1.1.1.16Integer32 (0 | 4)read-writecurrent
juniL2tpSysConfigEnableRxSpeedAvpWhenEqual
OBJECT-TYPE
Enable/disable generation of L2TP RX speed AVP when RX and TX speeds are equal. Note the RX speed is always generated when the RX and TX speeds differ.
1.3.6.1.4.1.4874.2.2.35.1.1.1.17JuniEnableread-writecurrent
juniL2tpSysConfigRejectTxAddressChange
OBJECT-TYPE
Configure L2TP to reject IP address and/or UDP port changes on incomming SCCRP messages. disable(0) - address change is allowed ipAddressAndUdpPort(1)- reject both address and port changes ipAddress(2) - reject address changes only udpPort(3) - reject port changes only.
1.3.6.1.4.1.4874.2.2.35.1.1.1.18INTEGER {disable(0), ipAddressAndUdpPort(1), ipAddress(2), udpPort(3)}read-writecurrent
juniL2tpSysConfigShortDrainTimeout
OBJECT-TYPE
Configure the L2TP short drain interval. This interval represents the time a tunnel, that is already draining, will continue to drain upon receiving a start request.
1.3.6.1.4.1.4874.2.2.35.1.1.1.19INTEGER (0..31)read-writecurrent
juniL2tpSysConfigDestinationLockoutTestEnabled
OBJECT-TYPE
Enable/disable testing of failed destiantion before removing lockout.
1.3.6.1.4.1.4874.2.2.35.1.1.1.20JuniEnableread-writecurrent
juniL2tpSysConfigDestinationLockoutTimeout
OBJECT-TYPE
Failed destination remains locked out for the specified amount of time.
1.3.6.1.4.1.4874.2.2.35.1.1.1.21Integer32 (60..3600)read-writecurrent
juniL2tpSysConfigFailoverResync
OBJECT-TYPE
Configure L2TP failover resync mechanism. disable(0) - Disable failover resync failoverProtocol(1) - Use the L2TP Failover Protocol silentFailover(2) - Use the JUNOSe Silent Failover Mechanism failoverProtocolFallbackToSilentFailover(3) - (Default) Use the L2TP Failover Protocol and fall back to Silent Failover.
1.3.6.1.4.1.4874.2.2.35.1.1.1.22INTEGER {disable(0), failoverProtocol(1), silentFailover(2), failoverProtocolFallbackToSilentFailover(3)}read-writecurrent
juniL2tpSystemStatus
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.1.2
juniL2tpSysStatusProtocolVersion
OBJECT-TYPE
Vector of supported L2TP protocol version and revision numbers. Supported versions are identified via a two octet pairing where the first octet indicates the version and the second octet contains the revision.
1.3.6.1.4.1.4874.2.2.35.1.1.2.1OCTET STRING (SIZE(2..256))read-onlycurrent
juniL2tpSysStatusVendorName
OBJECT-TYPE
Vendor name of the L2TP protocol stack.
1.3.6.1.4.1.4874.2.2.35.1.1.2.2DisplayStringread-onlycurrent
juniL2tpSysStatusFirmwareRev
OBJECT-TYPE
Firmware revision for the L2TP protocol stack.
1.3.6.1.4.1.4874.2.2.35.1.1.2.3Integer32read-onlycurrent
juniL2tpSysStatusTotalDestinations
OBJECT-TYPE
Number of destination creations attempted.
1.3.6.1.4.1.4874.2.2.35.1.1.2.4Counter32read-onlycurrent
juniL2tpSysStatusFailedDestinations
OBJECT-TYPE
Number of destination creation attempts that failed.
1.3.6.1.4.1.4874.2.2.35.1.1.2.5Counter32read-onlycurrent
juniL2tpSysStatusActiveDestinations
OBJECT-TYPE
Number of destinations having at least one active tunnel.
1.3.6.1.4.1.4874.2.2.35.1.1.2.6Gauge32read-onlycurrent
juniL2tpSysStatusTotalTunnels
OBJECT-TYPE
Number of tunnel creations attempted.
1.3.6.1.4.1.4874.2.2.35.1.1.2.7Counter32read-onlycurrent
juniL2tpSysStatusFailedTunnels
OBJECT-TYPE
Number of tunnel creation attempts that failed to reach the established state.
1.3.6.1.4.1.4874.2.2.35.1.1.2.8Counter32read-onlycurrent
juniL2tpSysStatusFailedTunnelAuthens
OBJECT-TYPE
Number of tunnel creation attempts that failed authentication.
1.3.6.1.4.1.4874.2.2.35.1.1.2.9Counter32read-onlycurrent
juniL2tpSysStatusActiveTunnels
OBJECT-TYPE
Number of tunnels currently established.
1.3.6.1.4.1.4874.2.2.35.1.1.2.10Gauge32read-onlycurrent
juniL2tpSysStatusTotalSessions
OBJECT-TYPE
Number of session creations attempted.
1.3.6.1.4.1.4874.2.2.35.1.1.2.11Counter32read-onlycurrent
juniL2tpSysStatusFailedSessions
OBJECT-TYPE
Number of session creation attempts that failed to reach the established state.
1.3.6.1.4.1.4874.2.2.35.1.1.2.12Counter32read-onlycurrent
juniL2tpSysStatusActiveSessions
OBJECT-TYPE
Number of sessions currently established.
1.3.6.1.4.1.4874.2.2.35.1.1.2.13Gauge32read-onlycurrent
juniL2tpSysStatusTotalSwitchedSessions
OBJECT-TYPE
Number of switched session creations attempted.
1.3.6.1.4.1.4874.2.2.35.1.1.2.14Counter32read-onlycurrent
juniL2tpSysStatusFailedSwitchedSessions
OBJECT-TYPE
Number of switched session creation attempts that failed to reach the established state.
1.3.6.1.4.1.4874.2.2.35.1.1.2.15Counter32read-onlycurrent
juniL2tpSysStatusActiveSwitchedSessions
OBJECT-TYPE
Number of switched sessions currently established.
1.3.6.1.4.1.4874.2.2.35.1.1.2.16Gauge32read-onlycurrent
juniL2tpSysStatusIfCounterDiscontinuityTime
OBJECT-TYPE
The value of sysUpTime on the most recent occasion at which any one or more of the system-level status and statistics suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
1.3.6.1.4.1.4874.2.2.35.1.1.2.17TimeStampread-onlycurrent
juniL2tpDestination
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.2
juniL2tpDestConfig
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.2.1
juniL2tpDestConfigTable
OBJECT-TYPE
The L2TP destination configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpDestStatsTable.
1.3.6.1.4.1.4874.2.2.35.1.2.1.2not-accessiblecurrent
juniL2tpDestConfigEntry
OBJECT-TYPE
Describes the configuration attributes of an L2TP destination.
1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1not-accessiblecurrent
juniL2tpDestConfigIfIndex
OBJECT-TYPE
Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpDestConfigRowStatus
OBJECT-TYPE
An implementation may choose not to support administrative configuration of tunnels.
1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.2RowStatusread-createcurrent
juniL2tpDestConfigAdminState
OBJECT-TYPE
The configured administrative state.
1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.3JuniL2tpAdminStateread-createcurrent
juniL2tpDestConfigLockoutAction
OBJECT-TYPE
The lockout action to be applied to a destination.
1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.4JuniL2tpLockoutActionread-createcurrent
juniL2tpDestStatus
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.2.2
juniL2tpDestStatusTable
OBJECT-TYPE
The L2TP destination status table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpDestConfigTable.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1not-accessiblecurrent
juniL2tpDestStatusEntry
OBJECT-TYPE
Describes the status attributes of an L2TP destination.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1not-accessiblecurrent
juniL2tpDestStatusIfIndex
OBJECT-TYPE
Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpDestStatusTransport
OBJECT-TYPE
The underlying transport over which this L2TP destination is carried.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.2JuniL2tpTransportread-onlycurrent
juniL2tpDestStatusEffectiveAdminState
OBJECT-TYPE
The administrative state currently in effect. This could be the configured admin state for this destination, or an overriding admin state exerted from a higher hierarchical level (system).
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.3JuniL2tpAdminStateread-onlycurrent
juniL2tpDestStatusTotalTunnels
OBJECT-TYPE
Number of tunnel creations attempted.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.4Counter32read-onlycurrent
juniL2tpDestStatusFailedTunnels
OBJECT-TYPE
Number of tunnel creation attempts that failed to reach the established state.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.5Counter32read-onlycurrent
juniL2tpDestStatusFailedTunnelAuthens
OBJECT-TYPE
Number of tunnel creation attempts that failed authentication.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.6Counter32read-onlycurrent
juniL2tpDestStatusActiveTunnels
OBJECT-TYPE
Number of tunnels currently established.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.7Gauge32read-onlycurrent
juniL2tpDestStatusTotalSessions
OBJECT-TYPE
Number of session creations attempted.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.8Counter32read-onlycurrent
juniL2tpDestStatusFailedSessions
OBJECT-TYPE
Number of session creation attempts that failed to reach the established state.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.9Counter32read-onlycurrent
juniL2tpDestStatusActiveSessions
OBJECT-TYPE
Number of sessions currently established.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.10Gauge32read-onlycurrent
juniL2tpDestStatusLockoutState
OBJECT-TYPE
Lockout state of destination.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.11JuniL2tpLockoutStateread-onlycurrent
juniL2tpDestStatusLockoutTimeRemaining
OBJECT-TYPE
Lockout timeout remaining.
1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.12Gauge32read-onlycurrent
juniL2tpDestStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.2.3
juniL2tpDestStatTable
OBJECT-TYPE
The L2TP destination statistics table. Describes the aggregate control and payload statistics for all L2TP tunnels configured on each destination. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpDestConfigTable.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1not-accessiblecurrent
juniL2tpDestStatEntry
OBJECT-TYPE
Describes the aggregate L2TP control and payload statistics for all L2TP tunnels on an L2TP destination.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1not-accessiblecurrent
juniL2tpDestStatIfIndex
OBJECT-TYPE
Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpDestStatCtlRecvOctets
OBJECT-TYPE
Number of control octets received.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.2Counter32read-onlycurrent
juniL2tpDestStatCtlRecvPackets
OBJECT-TYPE
Number of control packets received.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.3Counter32read-onlycurrent
juniL2tpDestStatCtlRecvErrors
OBJECT-TYPE
Number of control packets incurring reception errors.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.4Counter32read-onlycurrent
juniL2tpDestStatCtlRecvDiscards
OBJECT-TYPE
Number of control packets discarded after reception.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.5Counter32read-onlycurrent
juniL2tpDestStatCtlSendOctets
OBJECT-TYPE
Number of control octets sent.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.6Counter32read-onlycurrent
juniL2tpDestStatCtlSendPackets
OBJECT-TYPE
Number of control packets sent.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.7Counter32read-onlycurrent
juniL2tpDestStatCtlSendErrors
OBJECT-TYPE
Number of control packets incurring transmission errors.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.8Counter32read-onlycurrent
juniL2tpDestStatCtlSendDiscards
OBJECT-TYPE
Number of control packets discarded before transmission.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.9Counter32read-onlycurrent
juniL2tpDestStatPayRecvOctets
OBJECT-TYPE
Number of payload octets received.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.10Counter32read-onlycurrent
juniL2tpDestStatPayRecvPackets
OBJECT-TYPE
Number of payload packets received.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.11Counter32read-onlycurrent
juniL2tpDestStatPayRecvErrors
OBJECT-TYPE
Number of payload packets incurring reception errors.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.12Counter32read-onlycurrent
juniL2tpDestStatPayRecvDiscards
OBJECT-TYPE
Number of payload packets discarded after reception.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.13Counter32read-onlycurrent
juniL2tpDestStatPaySendOctets
OBJECT-TYPE
Number of payload octets sent.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.14Counter32read-onlycurrent
juniL2tpDestStatPaySendPackets
OBJECT-TYPE
Number of payload packets sent.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.15Counter32read-onlycurrent
juniL2tpDestStatPaySendErrors
OBJECT-TYPE
Number of payload packets incurring transmission errors.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.16Counter32read-onlycurrent
juniL2tpDestStatPaySendDiscards
OBJECT-TYPE
Number of payload packets discarded before transmission.
1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.17Counter32read-onlycurrent
juniL2tpTunnel
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.3
juniL2tpTunnelConfig
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.3.1
juniL2tpTunnelConfigTable
OBJECT-TYPE
The L2TP tunnel configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpTunnelStatsTable.
1.3.6.1.4.1.4874.2.2.35.1.3.1.2not-accessiblecurrent
juniL2tpTunnelConfigEntry
OBJECT-TYPE
Describes the configuration attributes of an L2TP tunnel.
1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1not-accessiblecurrent
juniL2tpTunnelConfigIfIndex
OBJECT-TYPE
Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpTunnelConfigRowStatus
OBJECT-TYPE
An implementation may choose not to support administrative configuration of tunnels.
1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.2RowStatusread-createcurrent
juniL2tpTunnelConfigAdminState
OBJECT-TYPE
The configured administrative state.
1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.3JuniL2tpAdminStateread-createcurrent
juniL2tpTunnelStatus
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.3.2
juniL2tpTunnelStatusTable
OBJECT-TYPE
The L2TP tunnel status and statistics table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpTunnelConfigTable.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1not-accessiblecurrent
juniL2tpTunnelStatusEntry
OBJECT-TYPE
An L2TP tunnel interface stats entry.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1not-accessiblecurrent
juniL2tpTunnelStatusIfIndex
OBJECT-TYPE
Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpTunnelStatusTransport
OBJECT-TYPE
The underlying transport over which this L2TP tunnel is carried.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.2JuniL2tpTransportread-onlycurrent
juniL2tpTunnelStatusLocalTunnelId
OBJECT-TYPE
The local tunnel identifier.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.3JuniL2tpTunnelIdread-onlycurrent
juniL2tpTunnelStatusRemoteTunnelId
OBJECT-TYPE
The remote tunnel identifier.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.4JuniL2tpTunnelIdread-onlycurrent
juniL2tpTunnelStatusEffectiveAdminState
OBJECT-TYPE
The administrative state currently in effect. This could be the configured admin state for this tunnel, or an overriding admin state exerted from a higher hierarchical level (system, destination).
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.5JuniL2tpAdminStateread-onlycurrent
juniL2tpTunnelStatusState
OBJECT-TYPE
The current state of the tunnel.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.6INTEGER {idle(0), connecting(1), established(2), disconnecting(3)}read-onlycurrent
juniL2tpTunnelStatusInitiated
OBJECT-TYPE
Indicates whether the tunnel was initiated locally, or by the remote tunnel peer.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.7INTEGER {none(0), local(1), remote(2)}read-onlycurrent
juniL2tpTunnelStatusRemoteHostName
OBJECT-TYPE
The host name obtained during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero-length string if no name was previously known.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8DisplayStringread-onlycurrent
juniL2tpTunnelStatusRemoteVendorName
OBJECT-TYPE
Identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle, this object should maintain its value from the last time it was connected, of a zero-length string if no name was previously known.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.9DisplayStringread-onlycurrent
juniL2tpTunnelStatusRemoteFirmwareRevision
OBJECT-TYPE
The tunnel peer's firmware revision number. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero value if no revision was previously known.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10Integer32read-onlycurrent
juniL2tpTunnelStatusRemoteProtocolVersion
OBJECT-TYPE
The protocol version and revision of the tunnel peer's implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.11OCTET STRING (SIZE(2))read-onlycurrent
juniL2tpTunnelStatusRemoteBearerCapabilities
OBJECT-TYPE
The Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not previously known.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.12INTEGER {none(0), digital(1), analog(2), digitalAnalog(3)}read-onlycurrent
juniL2tpTunnelStatusRemoteFramingCapabilities
OBJECT-TYPE
The Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not previously known.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.13INTEGER {none(0), sync(1), async(2), syncAsync(3)}read-onlycurrent
juniL2tpTunnelStatusRecvWindowSize
OBJECT-TYPE
The receive window size.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.14Gauge32read-onlycurrent
juniL2tpTunnelStatusSendWindowSize
OBJECT-TYPE
The tunnel peer's receive window size.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.15Gauge32read-onlycurrent
juniL2tpTunnelStatusSendQueueDepth
OBJECT-TYPE
Number of control packets on transmit queue.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.16Gauge32read-onlycurrent
juniL2tpTunnelStatusRecvSeq
OBJECT-TYPE
The next sequence number expected in a received control packet.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.17Integer32 (0..65535)read-onlycurrent
juniL2tpTunnelStatusRecvSeqAck
OBJECT-TYPE
The last received sequence number that was acknowledged back to the tunnel peer.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.18Integer32 (0..65535)read-onlycurrent
juniL2tpTunnelStatusSendSeq
OBJECT-TYPE
The next sequence number to be sent in a transmitted control packet.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.19Integer32 (0..65535)read-onlycurrent
juniL2tpTunnelStatusSendSeqAck
OBJECT-TYPE
The send sequence number that the tunnel peer has acknowledged. The flow control state can be determined by subtracting the juniL2tpTunnelStatusSendSeq from juniL2tpTunnelStatusSendSeqAck and comparing this value to juniL2tpTunnelStatusSendWindowSize.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.20Integer32 (0..65535)read-onlycurrent
juniL2tpTunnelStatusTotalSessions
OBJECT-TYPE
The total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created, including those that have since terminated.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.21Counter32read-onlycurrent
juniL2tpTunnelStatusFailedSessions
OBJECT-TYPE
The number of sessions that were initiated but failed to reach the established phase.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.22Counter32read-onlycurrent
juniL2tpTunnelStatusActiveSessions
OBJECT-TYPE
The current number of sessions in the established state.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.23Gauge32read-onlycurrent
juniL2tpTunnelStatusLastResultCode
OBJECT-TYPE
The last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.24Integer32 (0..65535)read-onlycurrent
juniL2tpTunnelStatusLastErrorCode
OBJECT-TYPE
The last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.25Integer32 (0..65535)read-onlycurrent
juniL2tpTunnelStatusLastErrorMessage
OBJECT-TYPE
The last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.26DisplayStringread-onlycurrent
juniL2tpTunnelStatusCumEstabTime
OBJECT-TYPE
The cumulative time in seconds that this tunnel, since first being created, has spent in the established state (which may be punctuated by intervals outside the established state).
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.27Unsigned32read-onlycurrent
juniL2tpTunnelStatusEffectiveFailoverResync
OBJECT-TYPE
The mechanism employed following failover to resynchronize with the L2TP peer.
1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.28Integer32 (0..65535)read-onlycurrent
juniL2tpTunnelStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.3.3
juniL2tpTunnelStatTable
OBJECT-TYPE
The L2TP tunnel statistics table. Describes the control and payload statistics for each L2TP tunnel. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpTunnelConfigTable.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1not-accessiblecurrent
juniL2tpTunnelStatEntry
OBJECT-TYPE
Describes the L2TP control and payload statistics for an L2TP tunnel.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1not-accessiblecurrent
juniL2tpTunnelStatIfIndex
OBJECT-TYPE
Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpTunnelStatCtlRecvOctets
OBJECT-TYPE
Number of control octets received.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.2Counter32read-onlycurrent
juniL2tpTunnelStatCtlRecvPackets
OBJECT-TYPE
Number of control packets received.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.3Counter32read-onlycurrent
juniL2tpTunnelStatCtlRecvErrors
OBJECT-TYPE
Number of control packets incurring reception errors.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.4Counter32read-onlycurrent
juniL2tpTunnelStatCtlRecvDiscards
OBJECT-TYPE
Number of control packets discarded after reception.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.5Counter32read-onlycurrent
juniL2tpTunnelStatCtlSendOctets
OBJECT-TYPE
Number of control octets sent.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.6Counter32read-onlycurrent
juniL2tpTunnelStatCtlSendPackets
OBJECT-TYPE
Number of control packets sent.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.7Counter32read-onlycurrent
juniL2tpTunnelStatCtlSendErrors
OBJECT-TYPE
Number of control packets incurring transmission errors.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.8Counter32read-onlycurrent
juniL2tpTunnelStatCtlSendDiscards
OBJECT-TYPE
Number of control packets discarded before transmission.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.9Counter32read-onlycurrent
juniL2tpTunnelStatPayRecvOctets
OBJECT-TYPE
Number of payload octets received.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.10Counter32read-onlycurrent
juniL2tpTunnelStatPayRecvPackets
OBJECT-TYPE
Number of payload packets received.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.11Counter32read-onlycurrent
juniL2tpTunnelStatPayRecvErrors
OBJECT-TYPE
Number of payload packets incurring reception errors.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.12Counter32read-onlycurrent
juniL2tpTunnelStatPayRecvDiscards
OBJECT-TYPE
Number of payload packets discarded after reception.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.13Counter32read-onlycurrent
juniL2tpTunnelStatPaySendOctets
OBJECT-TYPE
Number of payload octets sent.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.14Counter32read-onlycurrent
juniL2tpTunnelStatPaySendPackets
OBJECT-TYPE
Number of payload packets sent.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.15Counter32read-onlycurrent
juniL2tpTunnelStatPaySendErrors
OBJECT-TYPE
Number of payload packets incurring transmission errors.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.16Counter32read-onlycurrent
juniL2tpTunnelStatPaySendDiscards
OBJECT-TYPE
Number of payload packets discarded before transmission.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.17Counter32read-onlycurrent
juniL2tpTunnelStatCtlRecvZLB
OBJECT-TYPE
Number of Zero Length Body control packet acknowledgement packets that were received.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.18Counter32read-onlycurrent
juniL2tpTunnelStatCtlRecvOutOfSequence
OBJECT-TYPE
Number of control packets not received in the correct sequence number order.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.19Counter32read-onlycurrent
juniL2tpTunnelStatCtlRecvOutOfWindow
OBJECT-TYPE
Number of control packets received outside the offered receive window.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.20Counter32read-onlycurrent
juniL2tpTunnelStatCtlSendZLB
OBJECT-TYPE
Number of Zero Length Body control packets sent.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.21Counter32read-onlycurrent
juniL2tpTunnelStatCtlSendRetransmits
OBJECT-TYPE
Number of control packet send retransmissions.
1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.22Counter32read-onlycurrent
juniL2tpTunnelMap
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.3.4
juniL2tpMapTifSidToSifTable
OBJECT-TYPE
Table of TunnelIf/SessionId -> SessionIf mappings.
1.3.6.1.4.1.4874.2.2.35.1.3.4.1not-accessiblecurrent
juniL2tpMapTifSidToSifEntry
OBJECT-TYPE
A mapping of TunnelIf/SessionId to SessionIf.
1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1not-accessiblecurrent
juniL2tpMapTifSidToSifTunnelIfIndex
OBJECT-TYPE
The ifIndex of a tunnel interface.
1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpMapTifSidToSifLocalSessionId
OBJECT-TYPE
A local session ID on the associated tunnel interface.
1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.2JuniL2tpSessionIdnot-accessiblecurrent
juniL2tpMapTifSidToSifSessionIfIndex
OBJECT-TYPE
The ifIndex of the session interface identified by this entry's Tunnel ifIndex and local Session ID pair.
1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.3InterfaceIndexread-onlycurrent
juniL2tpMapTidToTifTable
OBJECT-TYPE
Map L2TP tunnel IDs to tunnel interfaces.
1.3.6.1.4.1.4874.2.2.35.1.3.4.2not-accessiblecurrent
juniL2tpMapTidToTifEntry
OBJECT-TYPE
A mapping of L2TP tunnel ID to tunnel interface.
1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1not-accessiblecurrent
juniL2tpMapTidToTifLocalTunnelId
OBJECT-TYPE
A local tunnel identifier.
1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.1JuniL2tpTunnelIdnot-accessiblecurrent
juniL2tpMapTidToTifIfIndex
OBJECT-TYPE
The ifIndex of the tunnel interface having the associated tunnel identifier.
1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.2InterfaceIndexread-onlycurrent
juniL2tpSession
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.4
juniL2tpSessionConfig
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.4.1
juniL2tpSessionConfigTable
OBJECT-TYPE
The L2TP session configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpSessionStatsTable.
1.3.6.1.4.1.4874.2.2.35.1.4.1.2not-accessiblecurrent
juniL2tpSessionConfigEntry
OBJECT-TYPE
Describes the configuration attributes of an L2TP session.
1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1not-accessiblecurrent
juniL2tpSessionConfigIfIndex
OBJECT-TYPE
Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpSessionConfigRowStatus
OBJECT-TYPE
An implementation may choose not to support administrative configuration of tunnels.
1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.2RowStatusread-createcurrent
juniL2tpSessionConfigAdminState
OBJECT-TYPE
The configured administrative state.
1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.3JuniL2tpAdminStateread-createcurrent
juniL2tpSessionStatus
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.4.2
juniL2tpSessionStatusTable
OBJECT-TYPE
The L2TP session status and statistics table.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1not-accessiblecurrent
juniL2tpSessionStatusEntry
OBJECT-TYPE
An L2TP session interface status and statistics entry.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1not-accessiblecurrent
juniL2tpSessionStatusIfIndex
OBJECT-TYPE
The ifIndex of an L2TP session interface.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpSessionStatusLacPppIfIndex
OBJECT-TYPE
For pass-through PPP sessions (conventional LAC), the ifIndex of an associated local PPP interface through which the remote LAC client was connected. If unknown, this object contains a value of zero. For locally originated PPP sessions (LNS-like), this object has a value of zero. This object is deprecated in favor of juniL2tpSessionStatusLacTunneledIfIndex.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.2InterfaceIndexOrZeroread-onlydeprecated
juniL2tpSessionStatusLocalSessionId
OBJECT-TYPE
The local session ID for the session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.3JuniL2tpSessionIdread-onlycurrent
juniL2tpSessionStatusRemoteSessionId
OBJECT-TYPE
The remote session ID for the session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.4JuniL2tpSessionIdread-onlycurrent
juniL2tpSessionStatusUserName
OBJECT-TYPE
The peer session name on this interface, typically the login name of the remote user. If the user name is unknown this object will contain a zero-length string.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.5DisplayStringread-onlycurrent
juniL2tpSessionStatusEffectiveAdminState
OBJECT-TYPE
The administrative state currently in effect. This could be the configured admin state for this session, or an overriding admin state exerted from a higher hierarchical level (system, destination, tunnel).
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.6JuniL2tpAdminStateread-onlycurrent
juniL2tpSessionStatusState
OBJECT-TYPE
The current state of the session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.7INTEGER {idle(0), connecting(1), established(2), disconnecting(3)}read-onlycurrent
juniL2tpSessionStatusCallType
OBJECT-TYPE
The type of call and role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.8INTEGER {none(0), lacIncoming(1), lnsIncoming(2), lacOutgoing(3), lnsOutgoing(4)}read-onlycurrent
juniL2tpSessionStatusCallSerialNumber
OBJECT-TYPE
The serial number assigned to this session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.9Integer32read-onlycurrent
juniL2tpSessionStatusTxConnectSpeed
OBJECT-TYPE
The last known transmit baud rate for this session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.10Integer32read-onlycurrent
juniL2tpSessionStatusRxConnectSpeed
OBJECT-TYPE
The last known receive baud rate for this session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.11Integer32read-onlycurrent
juniL2tpSessionStatusCallBearerType
OBJECT-TYPE
The bearer type of this session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.12INTEGER {none(0), digital(1), analog(2)}read-onlycurrent
juniL2tpSessionStatusFramingType
OBJECT-TYPE
The framing type of this session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.13INTEGER {none(0), sync(1), async(2)}read-onlycurrent
juniL2tpSessionStatusPhysChanId
OBJECT-TYPE
The physical channel identifier for the session. For pass-through PPP sessions, typically the ifIndex of the access interface lying below the PPP interface identified by juniL2tpSessionStatusLacTunneledIfIndex.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.14Integer32read-onlycurrent
juniL2tpSessionStatusDnis
OBJECT-TYPE
The Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided, a zero-length string will be returned.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.15DisplayStringread-onlycurrent
juniL2tpSessionStatusClid
OBJECT-TYPE
The Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided, a zero-length string will be returned.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.16DisplayStringread-onlycurrent
juniL2tpSessionStatusSubAddress
OBJECT-TYPE
The SubAddress that the LAC obtained from the network for the session. If no SubAddress was provided, a zero-length string will be returned.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.17DisplayStringread-onlycurrent
juniL2tpSessionStatusPrivateGroupId
OBJECT-TYPE
The Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided, a zero-length string will be returned.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.18DisplayStringread-onlycurrent
juniL2tpSessionStatusProxyLcp
OBJECT-TYPE
Indicates whether proxy LCP was provided for this session.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.19TruthValueread-onlycurrent
juniL2tpSessionStatusAuthMethod
OBJECT-TYPE
The proxy authentication method employed by the LAC for the session. If juniL2tpSessionProxyLcp is false(2) this object reports a value of 'none' and should be ignored.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.20INTEGER {none(0), pppChap(1), pppPap(2), pppMsChap(3)}read-onlycurrent
juniL2tpSessionStatusSequencingState
OBJECT-TYPE
Indicates which tunnel peers have requested payload sequencing.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.21INTEGER {none(0), remote(1), local(2), both(3)}read-onlycurrent
juniL2tpSessionStatusSendSeq
OBJECT-TYPE
The next send sequence number.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.22Integer32 (0..65535)read-onlycurrent
juniL2tpSessionStatusRecvSeq
OBJECT-TYPE
The next receive sequence number expected.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.23Integer32 (0..65535)read-onlycurrent
juniL2tpSessionStatusLacTunneledIfIndex
OBJECT-TYPE
For pass-through remote client sessions (conventional LAC), the ifIndex of an associated local interface through which the remote LAC client was connected. If unknown, this object contains a value of zero. For locally originated sessions (LNS-like), this object has a value of zero.
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.24InterfaceIndexOrZeroread-onlycurrent
juniL2tpSessionStatusCumEstabTime
OBJECT-TYPE
The cumulative time in seconds that this session, since first being created, has spent in the established state (which may be punctuated by intervals outside the established state).
1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.25Unsigned32read-onlycurrent
juniL2tpSessionStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.4.3
juniL2tpSessionStatTable
OBJECT-TYPE
The L2TP session statistics table.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1not-accessiblecurrent
juniL2tpSessionStatEntry
OBJECT-TYPE
An L2TP session interface statistics entry.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1not-accessiblecurrent
juniL2tpSessionStatIfIndex
OBJECT-TYPE
The ifIndex of an L2TP session interface.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpSessionStatPayRecvOctets
OBJECT-TYPE
Number of payload octets received.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.2Counter32read-onlycurrent
juniL2tpSessionStatPayRecvPackets
OBJECT-TYPE
Number of payload packets received.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.3Counter32read-onlycurrent
juniL2tpSessionStatPayRecvErrors
OBJECT-TYPE
Number of payload packets incurring reception errors.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.4Counter32read-onlycurrent
juniL2tpSessionStatPayRecvDiscards
OBJECT-TYPE
Number of payload packets discarded after reception.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.5Counter32read-onlycurrent
juniL2tpSessionStatPaySendOctets
OBJECT-TYPE
Number of payload octets sent.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.6Counter32read-onlycurrent
juniL2tpSessionStatPaySendPackets
OBJECT-TYPE
Number of payload packets sent.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.7Counter32read-onlycurrent
juniL2tpSessionStatPaySendErrors
OBJECT-TYPE
Number of payload packets incurring transmission errors.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.8Counter32read-onlycurrent
juniL2tpSessionStatPaySendDiscards
OBJECT-TYPE
Number of payload packets discarded before transmission.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.9Counter32read-onlycurrent
juniL2tpSessionStatRecvOutOfSequence
OBJECT-TYPE
The number of packets received out of sequence.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.10Counter32read-onlycurrent
juniL2tpSessionStatResequencingTimeouts
OBJECT-TYPE
The number of reassembly timeouts that have occurred.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.11Counter32read-onlycurrent
juniL2tpSessionStatPayLostPackets
OBJECT-TYPE
When sequence numbers are enabled, this value represents the estimated number of payload packets lost, based on observed gaps in sequence numbers. This estimate is subject to correction (decrement) upon receipt of out-of-sequence packets that fill previously observed gaps.
1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.12Unsigned32read-onlycurrent
juniL2tpTransport
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.5
juniL2tpTransportUdpIp
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.5.1
juniL2tpUdpIpSystem
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.5.1.1
juniL2tpUdpIpDestination
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.5.1.2
juniL2tpUdpIpDestTable
OBJECT-TYPE
The L2TP UDP/IP destination table. Reports the UDP/IP characteristics of a L2TP UDP/IP destination. A L2TP UDP/IP destination is associated with a local router, a local IP address, and with a remote IP address for the L2TP peer. More specific UDP/IP detail per tunnel is reported in the juniL2tpUdpIpTunnelTable.
1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1not-accessiblecurrent
juniL2tpUdpIpDestEntry
OBJECT-TYPE
Describes the UDP/IP attributes of an L2TP destination.
1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1not-accessiblecurrent
juniL2tpUdpIpDestIfIndex
OBJECT-TYPE
Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpUdpIpDestRouterIndex
OBJECT-TYPE
The index of an entry in the juniRouterTable for the local router with which this L2TP destination interface is associated.
1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.2Unsigned32read-onlycurrent
juniL2tpUdpIpDestLocalAddress
OBJECT-TYPE
This L2TP destination's local IP address.
1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.3IpAddressread-onlycurrent
juniL2tpUdpIpDestRemoteAddress
OBJECT-TYPE
The IP address of the remote L2TP endpoint.
1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.4IpAddressread-onlycurrent
juniL2tpUdpIpTunnel
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.5.1.3
juniL2tpUdpIpTunnelTable
OBJECT-TYPE
The L2TP UDP/IP tunnel table. Reports the UDP/IP characteristics of L2TP UDP/IP tunnels. A L2TP UDP/IP tunnel is defined in terms of the local and remote IP addresses and UDP ports.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1not-accessiblecurrent
juniL2tpUdpIpTunnelEntry
OBJECT-TYPE
An L2TP UDP/IP tunnel entry.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1not-accessiblecurrent
juniL2tpUdpIpTunnelIfIndex
OBJECT-TYPE
Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.1InterfaceIndexnot-accessiblecurrent
juniL2tpUdpIpTunnelRouterIndex
OBJECT-TYPE
The index of an entry in the juniRouterTable for the local router with which this L2TP tunnel interface is associated.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.2Unsigned32read-onlycurrent
juniL2tpUdpIpTunnelLocalAddress
OBJECT-TYPE
The local IP address for this UDP/IP tunnel.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.3IpAddressread-onlycurrent
juniL2tpUdpIpTunnelLocalPort
OBJECT-TYPE
The local UDP port for this UDP/IP tunnel.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.4Integer32read-onlycurrent
juniL2tpUdpIpTunnelRemoteAddress
OBJECT-TYPE
The remote IP address for this UDP/IP tunnel.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.5IpAddressread-onlycurrent
juniL2tpUdpIpTunnelRemotePort
OBJECT-TYPE
The remote UDP port for this UDP/IP tunnel.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.6Integer32read-onlycurrent
juniL2tpUdpIpTunnelRemoteReceiveAddress
OBJECT-TYPE
The remote receive IP address for this UDP/IP tunnel. This object will differ from juniL2tpUdpIpTunnelRemoteAddress when the tunnel uses separate transmit and receive addresses to the remote peer.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.7IpAddressread-onlycurrent
juniL2tpUdpIpTunnelRemoteReceivePort
OBJECT-TYPE
The remote receive UDP port for this UDP/IP tunnel. This object will differ from juniL2tpUdpIpTunnelRemotePort when the tunnel uses separate transmit and receive ports to the remote peer.
1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.8Integer32read-onlycurrent
juniL2tpUdpIpSession
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.1.5.1.4
juniL2tpTrapControl
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.2
juniL2tpConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.3
juniL2tpGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.3.1
juniL2tpCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.35.3.2

Conformance

NameOIDStatus
juniL2tpConfigGroup
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when juniL2tpSysConfigReceiveDataSequencingIgnore was added.
1.3.6.1.4.1.4874.2.2.35.3.1.1obsolete
juniL2tpStatusGroup
OBJECT-GROUP
Obsolete collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels. This group became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.35.3.1.2obsolete
juniL2tpStatGroup
OBJECT-GROUP
Obsolete collection of objects providing statistics of the L2TP protocol at the destination, tunnel, and session levels. This group became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.35.3.1.3obsolete
juniL2tpMapGroup
OBJECT-GROUP
A collection of objects providing mapping associations among L2TP components.
1.3.6.1.4.1.4874.2.2.35.3.1.4current
juniL2tpUdpIpGroup
OBJECT-GROUP
Obsolete collection of objects providing UDP/IP transport information for L2TP components.
1.3.6.1.4.1.4874.2.2.35.3.1.5obsolete
juniL2tpStatusGroup2
OBJECT-GROUP
Obsolete collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels.
1.3.6.1.4.1.4874.2.2.35.3.1.6obsolete
juniL2tpStatGroup2
OBJECT-GROUP
A collection of objects providing statistics of the L2TP protocol at the destination, tunnel, and session levels.
1.3.6.1.4.1.4874.2.2.35.3.1.7current
juniL2tpConfigGroup2
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.35.3.1.8obsolete
juniL2tpConfigGroup3
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when juniL2tpSysConfigDisableCallingNumberAvp was added.
1.3.6.1.4.1.4874.2.2.35.3.1.9obsolete
juniL2tpConfigGroup4
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.35.3.1.10obsolete
juniL2tpConfigGroup5
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.35.3.1.11obsolete
juniL2tpConfigGroup6
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.35.3.1.12obsolete
juniL2tpConfigGroup7
OBJECT-GROUP
A collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.13obsolete
juniL2tpUdpIpGroup1
OBJECT-GROUP
A collection of objects providing UDP/IP transport information for L2TP components.
1.3.6.1.4.1.4874.2.2.35.3.1.14current
juniL2tpConfigGroup8
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.15obsolete
juniL2tpConfigGroup9
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.16obsolete
juniL2tpConfigGroup10
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.17obsolete
juniL2tpStatusGroup3
OBJECT-GROUP
Obsolete collection of objects providing status information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.18obsolete
juniL2tpConfigGroup11
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.19obsolete
juniL2tpConfigGroup12
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.20obsolete
juniL2tpStatusGroup4
OBJECT-GROUP
Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.21obsolete
juniL2tpConfigGroup13
OBJECT-GROUP
A collection of objects providing configuration information of the L2TP protocol, tunnels and sessions.
1.3.6.1.4.1.4874.2.2.35.3.1.22current
juniL2tpStatusGroup5
OBJECT-GROUP
A collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels.
1.3.6.1.4.1.4874.2.2.35.3.1.23current
juniL2tpCompliance
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when juniL2tpTunnelStatusCumEstabTime, juniL2tpSessionStatusCumEstabTime and juniL2tpSessionStatPayLostPackets were added, and juniL2tpSessionStatusLacTunneledIfIndex replaced juniL2tpSessionStatusLacPppIfIndex.
1.3.6.1.4.1.4874.2.2.35.3.2.1obsolete
juniL2tpCompliance2
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when a new object was added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.2obsolete
juniL2tpCompliance3
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.3obsolete
juniL2tpCompliance4
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.4obsolete
juniL2tpCompliance5
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.5obsolete
juniL2tpCompliance6
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.6obsolete
juniL2tpCompliance7
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.7obsolete
juniL2tpCompliance8
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.8obsolete
juniL2tpCompliance9
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.9obsolete
juniL2tpCompliance10
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration group.
1.3.6.1.4.1.4874.2.2.35.3.2.10obsolete
juniL2tpCompliance11
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the status group.
1.3.6.1.4.1.4874.2.2.35.3.2.11obsolete
juniL2tpCompliance12
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the config and status groups.
1.3.6.1.4.1.4874.2.2.35.3.2.12obsolete
juniL2tpCompliance13
MODULE-COMPLIANCE
Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the config and status group.
1.3.6.1.4.1.4874.2.2.35.3.2.13current
juniL2tpCompliance14
MODULE-COMPLIANCE
The compliance statement for SNMPv2 entities which implement the L2TP MIB.
1.3.6.1.4.1.4874.2.2.35.3.2.14current