Juniper-ISIS-MIB
- Registered at
- 1.3.6.1.4.1.4874.2.2.38
- Last updated
- 2006-03-13 14:30
- Organization
- Juniper Networks, Inc.
- Revisions
- 2006-12-13 13:30, 2006-03-01 14:30, 2006-03-01 14:30, 2005-12-26 14:30, 2005-10-21 08:10, 2005-03-29 14:30, 2005-01-17 08:10, 2005-01-06 05:04, 2004-11-02 05:04, 2004-10-18 14:14, 2002-09-16 21:44, 2001-12-10 21:29, 2001-12-07 15:22, 2001-04-17 21:26, 2000-02-22 00:00
- Namespace
- juniper
- Source file
Juniper-ISIS-MIB- Digest
sha256:fadd82355366c65bdb8cd3963681963378848aafb67928f35d1874b3d0679e73
Description
The intermediate system to intermediate system (IS-IS) routing protocol MIB for Juniper Networks E-series products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195.
Contact
Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB Juniper-ISIS-MIB Juniper-MIBs Juniper-UNI-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AuthTime TEXTUAL-CONVENTION Then number of seconds since Jan. 1 1970. | current | |||
| CircuitID TEXTUAL-CONVENTION ID for a circuit. | current | |||
| ISPriority TEXTUAL-CONVENTION Integer sub-range for ISIS priority. | current | |||
| JuniDefaultMetric TEXTUAL-CONVENTION Integer sub-range for default metric for single hop. The value is truncated to 63 when the juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow | current | |||
| LSPBuffSize TEXTUAL-CONVENTION Integer sub range for LSP size. | current | |||
| LevelState TEXTUAL-CONVENTION States of the ISIS protocol. | current | |||
| OSINSAddress TEXTUAL-CONVENTION OSI Network Service Address, e.g. NSAP, Network Entity Title | current | |||
| OperState TEXTUAL-CONVENTION Type used in enabling and disabling a row. | current | |||
| OtherMetric TEXTUAL-CONVENTION Integer sub-range for metrics other than the default metric for single hop. | current | |||
| SupportedProtocol TEXTUAL-CONVENTION Types of network protocol supported by Integrated ISIS. The values for ISO8473 and IP are those registered for these protocols in ISO TR9577. | current | |||
| SystemID TEXTUAL-CONVENTION A system ID of exactly six bytes. Must not be all zeros. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| juniIsisObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.38.1 | |||
| juniIsisSystemGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.38.1.1 | |||
| juniIsisSysTable OBJECT-TYPE The set of instances of the Integrated IS-IS protocol existing on the system. | 1.3.6.1.4.1.4874.2.2.38.1.1.1 | not-accessible | current | |
| juniIsisSysEntry OBJECT-TYPE Each row defines information specific to a single instance of the protocol existing on the system. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1 | not-accessible | current | |
| juniIsisSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysVersion OBJECT-TYPE The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2 | DisplayString (SIZE(0..24)) | read-only | current |
| juniIsisSysType OBJECT-TYPE The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3 | INTEGER {level1IS(1), level1l2IS(2), level2Only(3)} | read-write | current |
| juniIsisSysID OBJECT-TYPE The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4 | SystemID | read-write | current |
| juniIsisSysMaxPathSplits OBJECT-TYPE Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5 | Integer32 (1..16) | read-write | current |
| juniIsisSysMaxLSPGenInt OBJECT-TYPE Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6 | Integer32 (1..65535) | read-write | current |
| juniIsisSysOrigLSPBuffSize OBJECT-TYPE The maximum size of LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7 | LSPBuffSize | read-write | current |
| juniIsisSysMaxAreaAddresses OBJECT-TYPE The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8 | Integer32 (0..254) | read-only | current |
| juniIsisSysMinL1LSPGenInt OBJECT-TYPE Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9 | Integer32 (0..120) | read-write | current |
| juniIsisSysMinL2LSPGenInt OBJECT-TYPE Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10 | Integer32 (0..120) | read-write | current |
| juniIsisSysPollESHelloRate OBJECT-TYPE The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11 | Integer32 (1..65535) | read-only | current |
| juniIsisSysWaitTime OBJECT-TYPE Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12 | Integer32 (1..65535) | read-only | current |
| juniIsisSysOperState OBJECT-TYPE The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13 | OperState | read-write | current |
| juniIsisSysL1State OBJECT-TYPE The state of the Level 1 database. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14 | LevelState | read-only | current |
| juniIsisSysCorrLSPs OBJECT-TYPE Number of corrupted LSPs detected. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15 | Counter32 | read-only | current |
| juniIsisSysLSPL1DbaseOloads OBJECT-TYPE Number of times the LSP L1 database has become overloaded. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16 | Counter32 | read-only | current |
| juniIsisSysManAddrDropFromAreas OBJECT-TYPE Number of times a manual address has been dropped from the area. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17 | Counter32 | read-only | current |
| juniIsisSysAttmptToExMaxSeqNums OBJECT-TYPE Number of times the IS has attempted to exceed the maximum sequence number. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18 | Counter32 | read-only | current |
| juniIsisSysSeqNumSkips OBJECT-TYPE Number of times a sequence number skip has occurred. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19 | Counter32 | read-only | current |
| juniIsisSysOwnLSPPurges OBJECT-TYPE Number of times a zero-aged copy of the system's own LSP is received from some other node. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20 | Counter32 | read-only | current |
| juniIsisSysIDFieldLenMismatches OBJECT-TYPE Number of times a PDU is received with a different value for ID field length to that of the receiving system. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21 | Counter32 | read-only | current |
| juniIsisSysMaxAreaAddrMismatches OBJECT-TYPE Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22 | Counter32 | read-only | current |
| juniIsisSysOrigL2LSPBuffSize OBJECT-TYPE The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23 | LSPBuffSize | read-write | obsolete |
| juniIsisSysL2State OBJECT-TYPE The state of the Level 2 database. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24 | LevelState | read-only | current |
| juniIsisSysLSPL2DbaseOloads OBJECT-TYPE Number of times the Level 2 LSP database has become overloaded. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25 | Counter32 | read-only | current |
| juniIsisSysAuthFails OBJECT-TYPE The number of authentication failures recognized by this instance of the protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26 | Counter32 | read-only | current |
| juniIsisSysLSPIgnoreErrors OBJECT-TYPE If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27 | TruthValue | read-write | current |
| juniIsisSysMaxAreaCheck OBJECT-TYPE When on, enables checking of maximum area addresses per IS version of ISO10589. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28 | TruthValue | read-only | current |
| juniIsisSysSetOverloadBit OBJECT-TYPE Isis overload bit | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29 | TruthValue | read-write | current |
| juniIsisSysSetOverloadBitStartupDuration OBJECT-TYPE Specifies the length in time of seconds to set the overload bit from startup. This object must be set together with juniIsisSysSetOverloadBit, otherwise the agent will return zero. Zero value for this object implies that the overload bit is not set. Zero value does not have any meaning for this object. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30 | Integer32 (0 | 5..86400) | read-write | current |
| juniIsisSysMaxLspLifetime OBJECT-TYPE Specifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31 | Integer32 (1..65535) | read-write | current |
| juniIsisSysL1SpfInterval OBJECT-TYPE Minimum interval, in seconds, between level 1 SPF calculations. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32 | Integer32 (0..120) | read-write | current |
| juniIsisSysL2SpfInterval OBJECT-TYPE Minimum interval, in seconds, between level 2 SPF calculations. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33 | Integer32 (0..120) | read-write | current |
| juniIsisSysIshHoldTime OBJECT-TYPE Specify a holdtime advertised in ESH/ISH PDUs. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34 | Integer32 (1..65535) | read-write | current |
| juniIsisSysIshConfigTimer OBJECT-TYPE Specify the rate of transmission for ESH and ISH packets. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35 | Integer32 (1..65535) | read-write | current |
| juniIsisSysDistributeDomainWide OBJECT-TYPE When on, enables distribution of prefixes throughout a multi-level domain. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36 | TruthValue | read-write | current |
| juniIsisSysDistance OBJECT-TYPE The weight applied to IS-IS routes. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37 | Integer32 (1..255) | read-write | current |
| juniIsisSysL1MetricStyle OBJECT-TYPE Specifies the type of IP reachability TLV to advertise in level 1 LSPs. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38 | INTEGER {juniIsisMetricStyleNarrow(2), juniIsisMetricStyleNarrowTransition(3), juniIsisMetricStyleTransition(4), juniIsisMetricStyleWide(5), juniIsisMetricStyleWideTransition(6)} | read-write | current |
| juniIsisSysL2MetricStyle OBJECT-TYPE Specifies the type of IP reachability TLV to advertise in level 2 LSPs. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39 | INTEGER {juniIsisMetricStyleNarrow(2), juniIsisMetricStyleNarrowTransition(3), juniIsisMetricStyleTransition(4), juniIsisMetricStyleWide(5), juniIsisMetricStyleWideTransition(6)} | read-write | current |
| juniIsisSysIsoRouteTag OBJECT-TYPE The ISO routing area tag. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40 | OCTET STRING (SIZE(1..19)) | read-write | current |
| juniIsisSysMplsTeLevel OBJECT-TYPE Select flooding of MPLS traffic engineering link information into the specified ISIS level. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41 | INTEGER {levelNone(0), level1(1), level2(2)} | read-write | current |
| juniIsisSysMplsTeRtrIdIfIndex OBJECT-TYPE Configure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42 | InterfaceIndexOrZero | read-write | current |
| juniIsisSysMplsTeSpfUseAnyBestPath OBJECT-TYPE Configure whether or not to consider spf paths when alternate tunnel path exists | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.43 | TruthValue | read-write | current |
| juniIsisSysReferenceBandwidth OBJECT-TYPE Configure the reference bandwitdth used to calculate the link cost in bits per second.If the reference bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and juniIsisSysHighReferenceBandwidth must be used to report the reference bandwidth. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44 | Gauge32 | read-write | current |
| juniIsisSysHighReferenceBandwidth OBJECT-TYPE Configure the reference bandwitdth in mega bits per second. It is used to calculate the link cost. | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.45 | Gauge32 (1..1000000) | read-write | current |
| juniIsisManAreaAddrTable OBJECT-TYPE The set of manual area addresses configured on this Intermediate System. | 1.3.6.1.4.1.4874.2.2.38.1.1.2 | not-accessible | current | |
| juniIsisManAreaAddrEntry OBJECT-TYPE Each entry contains one area address manually configured on this system. | 1.3.6.1.4.1.4874.2.2.38.1.1.2.1 | not-accessible | current | |
| juniIsisManAreaAddrSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisManAreaAddr OBJECT-TYPE A manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an octet string is part of the OID. | 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2 | OSINSAddress | not-accessible | current |
| juniIsisManAreaAddrRowStatus OBJECT-TYPE The state of the juniIsisManAreaAddrEntry. This object follows the RowStatus behaviour. If an attempt is made to set this object to the value off when the corresponding juniIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding IS-IS instance has juniIsisSysOperState set to on then the attempt is rejected. | 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3 | RowStatus | read-create | current |
| juniIsisSysProtSuppTable OBJECT-TYPE This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.3 | not-accessible | current | |
| juniIsisSysProtSuppEntry OBJECT-TYPE Each entry contains one protocol supported by an instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.3.1 | not-accessible | current | |
| juniIsisSysProtSuppSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysProtSuppProtocol OBJECT-TYPE One supported protocol. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2 | SupportedProtocol | not-accessible | current |
| juniIsisSysProtSuppRowStatus OBJECT-TYPE The state of the juniIsisSysProtSuppEntry. This object follows the RowStatus behavior. | 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3 | RowStatus | read-only | current |
| juniIsisSummAddrTable OBJECT-TYPE The set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System. | 1.3.6.1.4.1.4874.2.2.38.1.1.4 | not-accessible | current | |
| juniIsisSummAddrEntry OBJECT-TYPE Each entry contains one IP summary address. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1 | not-accessible | current | |
| juniIsisSummAddrSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSummAddress OBJECT-TYPE The IP Address value for this summary address. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2 | IpAddress | not-accessible | current |
| juniIsisSummAddrMask OBJECT-TYPE The mask value for this summary address. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3 | IpAddress | not-accessible | current |
| juniIsisSummAddrRowStatus OBJECT-TYPE The existence state of this summary address. This object follows the RowStatus behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4 | RowStatus | read-create | current |
| juniIsisSummAddrOperState OBJECT-TYPE The operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5 | OperState | read-create | current |
| juniIsisSummAddrDefaultMetric OBJECT-TYPE The default metric value to announce this summary address with in Level 1 or 2 LSPs generated by this system. A Metric value of 0 indicates to use the lowest metric value amongst the routes being summarized. When advertising a metric value into a narrow domain (juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow) the value will be truncated to 63. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6 | Integer32 (0..16777214) | read-create | current |
| juniIsisSummAddrDelayMetric OBJECT-TYPE The delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7 | OtherMetric | read-only | current |
| juniIsisSummAddrExpenseMetric OBJECT-TYPE The expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8 | OtherMetric | read-only | current |
| juniIsisSummAddrErrorMetric OBJECT-TYPE The error metric value to announce this summary address with in Level n LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9 | OtherMetric | read-only | current |
| juniIsisSummLevel OBJECT-TYPE The level of database at which to annouce this summary. | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10 | INTEGER {level1IS(1), level2IS(2), level1l2IS(3)} | read-create | current |
| juniIsisSysHostNameTable OBJECT-TYPE This table contains the manually configured set of host name to system ID aliases supported by each instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.5 | not-accessible | current | |
| juniIsisSysHostNameEntry OBJECT-TYPE Each entry contains one name to system ID alias supported by an instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1 | not-accessible | current | |
| juniIsisSysHostNameSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysHostNameSysId OBJECT-TYPE The ID for the system which this name will be assigned. | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2 | SystemID | not-accessible | current |
| juniIsisSysHostNameAreaAddr OBJECT-TYPE A configured area address for the system which this name will be assigned. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID. | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3 | OSINSAddress | read-create | current |
| juniIsisSysHostNameName OBJECT-TYPE A string to use when displaying system data with this system ID. | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4 | OCTET STRING (SIZE(0..32)) | read-write | current |
| juniIsisSysHostNameType OBJECT-TYPE The type of host name entry. | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5 | INTEGER {hostNameTypeStatic(1), hostNameTypeDynamic(2)} | read-only | current |
| juniIsisSysHostNameRowStatus OBJECT-TYPE The status of this host name entry. This object follows the RowStatus behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6 | RowStatus | read-write | current |
| juniIsisSysAreaAuthenticationTable OBJECT-TYPE This table contains the manually configured set of area authentication keys supported by each instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.6 | not-accessible | current | |
| juniIsisSysAreaAuthenticationEntry OBJECT-TYPE Each entry contains one area authentication key supported by an instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1 | not-accessible | current | |
| juniIsisSysAreaAuthenticationSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysAreaAuthenticationKeyId OBJECT-TYPE The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2 | Integer32 (0..255) | not-accessible | current |
| juniIsisSysAreaAuthenticationPwd OBJECT-TYPE The value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of juniIsisSysAreaAuthenticationKeyType does not modify the juniIsisSysAreaAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3 | OCTET STRING (SIZE(0..20)) | read-write | current |
| juniIsisSysAreaAuthenticationKeyType OBJECT-TYPE What authentication scheme, if any, is used to protect Level 1 Link State packets and sequence number packets | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4 | INTEGER {none(0), plaintext(1), hmacMd5(2)} | read-write | current |
| juniIsisSysAreaAuthenticationStartAcceptTime OBJECT-TYPE The date and time when this authentication key will start to be used to validate level 1 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was created | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5 | AuthTime | read-write | current |
| juniIsisSysAreaAuthenticationStartGenerateTime OBJECT-TYPE The date and time when this authentication key will start to be used to authenticate level 1 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6 | AuthTime | read-write | current |
| juniIsisSysAreaAuthenticationStopAcceptTime OBJECT-TYPE The date and time when this authentication key will stop being accepted as a valid level 1 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets. | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7 | AuthTime | read-write | current |
| juniIsisSysAreaAuthenticationStopGenerateTime OBJECT-TYPE The date and time when this authentication key will stop being used to authenticate level 1 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets. | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8 | AuthTime | read-write | current |
| juniIsisSysAreaAuthenticationRowStatus OBJECT-TYPE The existence state of this authentication key. This object follows the RowStatus behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9 | RowStatus | read-write | current |
| juniIsisSysDomainAuthenticationTable OBJECT-TYPE This table contains the manually configured set of domain authentication keys supported by each instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.7 | not-accessible | current | |
| juniIsisSysDomainAuthenticationEntry OBJECT-TYPE Each entry contains one domain authentication key supported by an instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1 | not-accessible | current | |
| juniIsisSysDomainAuthenticationSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysDomainAuthenticationKeyId OBJECT-TYPE The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2 | Integer32 (0..255) | not-accessible | current |
| juniIsisSysDomainAuthenticationPwd OBJECT-TYPE The value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of juniIsisSysDomainAuthenticationKeyType does not modify the juniIsisSysDomainAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3 | OCTET STRING (SIZE(0..20)) | read-write | current |
| juniIsisSysDomainAuthenticationKeyType OBJECT-TYPE What authentication scheme, if any, is used to protect Level 2 Link State packets and Sequence Number packets | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4 | INTEGER {none(0), plaintext(1), hmacMd5(2)} | read-write | current |
| juniIsisSysDomainAuthenticationStartAcceptTime OBJECT-TYPE The date and time when this authentication key will start to be used to validate level 2 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was created | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5 | AuthTime | read-write | current |
| juniIsisSysDomainAuthenticationStartGenerateTime OBJECT-TYPE The date and time when this authentication key will start to be used to authenticate level 2 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6 | AuthTime | read-write | current |
| juniIsisSysDomainAuthenticationStopAcceptTime OBJECT-TYPE The date and time when this authentication key will stop being accepted as a valid level 2 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets. | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7 | AuthTime | read-write | current |
| juniIsisSysDomainAuthenticationStopGenerateTime OBJECT-TYPE The date and time when this authentication key will stop being used to authenticate level 2 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets. | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8 | AuthTime | read-write | current |
| juniIsisSysDomainAuthenticationRowStatus OBJECT-TYPE The existence state of this authentication key. This object follows the RowStatus behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9 | RowStatus | read-write | current |
| juniIsisMplsTeTunnelTable OBJECT-TYPE The set of tunnels imported from MPLS. | 1.3.6.1.4.1.4874.2.2.38.1.1.8 | not-accessible | current | |
| juniIsisMplsTeTunnelEntry OBJECT-TYPE Each entry contains metric details of an MPLS LSP | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1 | not-accessible | current | |
| juniIsisMplsTeTunnelSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisMplsNextHopIndex OBJECT-TYPE An index to uniquely identify the tunnels. | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.2 | Integer32 | not-accessible | current |
| juniIsisMplsTeSystemId OBJECT-TYPE The ID for the instance of the Integrated IS-IS protocol running in the tunnel's end point. | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.3 | SystemID | read-only | current |
| juniIsisMplsTeRouterId OBJECT-TYPE The router ID of the tunnel's end point. | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.4 | IpAddress | read-only | current |
| juniIsisMplsTeTunnelMetric OBJECT-TYPE The metric associated with the tunnel. | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.5 | Integer32 | read-only | current |
| juniIsisMplsTeTunnelRelMetric OBJECT-TYPE The metric associated with the tunnel relative to the spf path. | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.6 | Integer32 | read-only | current |
| juniIsisMplsTeTunnelName OBJECT-TYPE The name associated with the tunnel. | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.7 | OCTET STRING (SIZE(1..40)) | read-only | current |
| juniIsisCircuitGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.38.1.2 | |||
| juniIsisCircTable OBJECT-TYPE The table of circuits used by each instance of Integrated IS-IS on this system. | 1.3.6.1.4.1.4874.2.2.38.1.2.1 | not-accessible | current | |
| juniIsisCircEntry OBJECT-TYPE An juniIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1 | not-accessible | current | |
| juniIsisCircSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisCircIfIndex OBJECT-TYPE The value of ifIndex for the interface to which this circuit corresponds. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisCircLocalID OBJECT-TYPE An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of juniIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3 | Integer32 | read-only | current |
| juniIsisCircOperState OBJECT-TYPE The operational state of the circuit. This object follows the operationalState behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4 | OperState | read-write | current |
| juniIsisCircRowStatus OBJECT-TYPE The existence state of this circuit. This object follows the RowStatus behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5 | RowStatus | read-write | current |
| juniIsisCircType OBJECT-TYPE The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of juniIsisCircIfIndex. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6 | INTEGER {broadcast(1), ptToPt(2)} | read-only | current |
| juniIsisCircL1DefaultMetric OBJECT-TYPE The default metric value of this circuit for Level 1 traffic. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7 | JuniDefaultMetric | read-write | current |
| juniIsisCircL1DelayMetric OBJECT-TYPE The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8 | OtherMetric | read-only | current |
| juniIsisCircL1ExpenseMetric OBJECT-TYPE The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9 | OtherMetric | read-only | current |
| juniIsisCircL1ErrorMetric OBJECT-TYPE The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10 | OtherMetric | read-only | current |
| juniIsisCircExtDomain OBJECT-TYPE If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11 | TruthValue | read-only | current |
| juniIsisCircAdjChanges OBJECT-TYPE The number of times an adjacency state change has occurred on this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12 | Counter32 | read-only | current |
| juniIsisCircInitFails OBJECT-TYPE The number of times initialization of this circuit has failed. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13 | Counter32 | read-only | current |
| juniIsisCircRejAdjs OBJECT-TYPE The number of times an adjacency has been rejected on this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14 | Counter32 | read-only | current |
| juniIsisCircOutCtrlPDUs OBJECT-TYPE The number of IS-IS control PDUs sent on this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15 | Counter32 | read-only | current |
| juniIsisCircInCtrlPDUs OBJECT-TYPE The number of IS-IS control PDUs received on this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16 | Counter32 | read-only | current |
| juniIsisCircIDFieldLenMismatches OBJECT-TYPE The number of times an IS-IS control PDU with an ID field length different to that for this system has been received. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17 | Counter32 | read-only | current |
| juniIsisCircL2DefaultMetric OBJECT-TYPE The default metric value of this circuit for level 2 traffic. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18 | JuniDefaultMetric | read-write | current |
| juniIsisCircL2DelayMetric OBJECT-TYPE The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19 | OtherMetric | read-only | current |
| juniIsisCircL2ExpenseMetric OBJECT-TYPE The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20 | OtherMetric | read-only | current |
| juniIsisCircL2ErrorMetric OBJECT-TYPE The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21 | OtherMetric | read-only | current |
| juniIsisCircManL2Only OBJECT-TYPE When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22 | TruthValue | read-only | current |
| juniIsisCircL1ISPriority OBJECT-TYPE The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23 | ISPriority | read-write | current |
| juniIsisCircL1CircID OBJECT-TYPE The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24 | CircuitID | read-only | current |
| juniIsisCircL1DesIS OBJECT-TYPE The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25 | SystemID | read-only | current |
| juniIsisCircLANL1DesISChanges OBJECT-TYPE The number of times the LAN Level 1 Designated Intermediate System has changed. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26 | Counter32 | read-only | current |
| juniIsisCircL2ISPriority OBJECT-TYPE The priority for becoming LAN level 2 Designated Intermediate System. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27 | ISPriority | read-write | current |
| juniIsisCircL2CircID OBJECT-TYPE The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28 | CircuitID | read-only | current |
| juniIsisCircL2DesIS OBJECT-TYPE The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29 | SystemID | read-only | current |
| juniIsisCircLANL2DesISChanges OBJECT-TYPE The number of times the LAN Level 2 Designated Intermediate System has changed. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30 | Counter32 | read-only | current |
| juniIsisCircMCAddr OBJECT-TYPE Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31 | INTEGER {group(1), functional(2)} | read-only | current |
| juniIsisCircPtToPtCircID OBJECT-TYPE The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32 | CircuitID | read-only | current |
| juniIsisCircL1HelloTimer OBJECT-TYPE Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33 | Integer32 (1..65535) | read-write | current |
| juniIsisCircL2HelloTimer OBJECT-TYPE Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34 | Integer32 (1..65535) | read-write | current |
| juniIsisCircL1HelloMultiplier OBJECT-TYPE This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35 | Integer32 (3..1000) | read-write | current |
| juniIsisCircL2HelloMultiplier OBJECT-TYPE This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36 | Integer32 (3..1000) | read-write | current |
| juniIsisCircMinLSPTransInt OBJECT-TYPE Minimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37 | Unsigned32 | read-write | current |
| juniIsisCircMinLSPReTransInt OBJECT-TYPE Minimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38 | Integer32 (1..65535) | read-write | current |
| juniIsisCircL1CSNPInterval OBJECT-TYPE Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs. Hence CSNP interval will be 0 for point-to-point networks. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39 | Integer32 (1..65535) | read-write | current |
| juniIsisCircL2CSNPInterval OBJECT-TYPE Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs. Hence CSNP interval will be 0 for point-to-point networks. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40 | Integer32 (1..65535) | read-write | current |
| juniIsisCircLSPThrottle OBJECT-TYPE Minimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41 | Integer32 (0..65535) | read-write | current |
| juniIsisCircMeshGroupEnabled OBJECT-TYPE Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42 | INTEGER {inactive(1), blocked(2), set(3)} | read-write | current |
| juniIsisCircMeshGroup OBJECT-TYPE Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If juniIsisCircMeshGroupEnabled is false, this value is ignored. Default value returned as 0 has no significance for this variable. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43 | Unsigned32 | read-write | current |
| juniIsisCircLevel OBJECT-TYPE The type of this circuit. This object follows the replaceOnlyWhileDisabled behavior. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44 | INTEGER {level1IS(0), level1l2IS(1), level2Only(2)} | read-write | current |
| juniIsisCircState OBJECT-TYPE The operational state of the circuit. | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45 | INTEGER {isisCircuitDown(1), isisCircuitUp(2)} | read-only | current |
| juniIsisSysL1CircAuthenticationTable OBJECT-TYPE This table contains the manually configured set of Level 1 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.2.2 | not-accessible | current | |
| juniIsisSysL1CircAuthenticationEntry OBJECT-TYPE Each entry contains one Level 1 circuit authentication key supported by an instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1 | not-accessible | current | |
| juniIsisSysL1CircAuthenticationSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysL1CircAuthenticationIfIndex OBJECT-TYPE The value of ifIndex for the interface to which this circuit corresponds. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysL1CircAuthenticationKeyId OBJECT-TYPE The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3 | Integer32 (0..255) | not-accessible | current |
| juniIsisSysL1CircAuthenticationPwd OBJECT-TYPE The value to be used as the Authentication Key in Level 1 Hello Packets whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value of hmacMd5. A modification of juniIsisSysL1CircAuthenticationKeyType does not modify the juniIsisSysL1CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4 | OCTET STRING (SIZE(0..20)) | read-write | current |
| juniIsisSysL1CircAuthenticationKeyType OBJECT-TYPE What authentication scheme, if any, is used to protect Level 1 hello packets. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5 | INTEGER {none(0), plaintext(1), hmacMd5(2)} | read-write | current |
| juniIsisSysL1CircAuthenticationStartAcceptTime OBJECT-TYPE The date and time when this authentication key will start to be used to validate level 1 IIH packets received. The Default value the start accept time will be the current time when the key was created. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6 | AuthTime | read-write | current |
| juniIsisSysL1CircAuthenticationStartGenerateTime OBJECT-TYPE The date and time when this authentication key will start to be used to authenticate level 1 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7 | AuthTime | read-write | current |
| juniIsisSysL1CircAuthenticationStopAcceptTime OBJECT-TYPE The date and time when this authentication key will stop being accepted as a valid level 1 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8 | AuthTime | read-write | current |
| juniIsisSysL1CircAuthenticationStopGenerateTime OBJECT-TYPE The date and time when this authentication key will stop being used to authenticate level 1 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9 | AuthTime | read-write | current |
| juniIsisSysL1CircAuthenticationRowStatus OBJECT-TYPE The existence state of this authentication key. This object follows the RowStatus behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10 | RowStatus | read-write | current |
| juniIsisSysL2CircAuthenticationTable OBJECT-TYPE This table contains the manually configured set of Level 2 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.2.3 | not-accessible | current | |
| juniIsisSysL2CircAuthenticationEntry OBJECT-TYPE Each entry contains one Level 2 circuit authentication key supported by an instance of the Integrated ISIS protocol. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1 | not-accessible | current | |
| juniIsisSysL2CircAuthenticationSysInstance OBJECT-TYPE The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysL2CircAuthenticationIfIndex OBJECT-TYPE The value of ifIndex for the interface to which this circuit corresponds. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2 | Integer32 (0..2147483647) | not-accessible | current |
| juniIsisSysL2CircAuthenticationKeyId OBJECT-TYPE The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3 | Integer32 (0..255) | not-accessible | current |
| juniIsisSysL2CircAuthenticationPwd OBJECT-TYPE The value to be used as the Authentication Key in Level 2 Hello Packets whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value of hmacMd5. A modification of juniIsisSysL2CircAuthenticationKeyType does not modify the juniIsisSysL2CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4 | OCTET STRING (SIZE(0..20)) | read-write | current |
| juniIsisSysL2CircAuthenticationKeyType OBJECT-TYPE What authentication scheme, if any, is used to protect Level 2 hello packets. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5 | INTEGER {none(0), plaintext(1), hmacMd5(2)} | read-write | current |
| juniIsisSysL2CircAuthenticationStartAcceptTime OBJECT-TYPE The date and time when this authentication key will start to be used to validate level 2 IIH packets received. The Default value the start accept time will be the current time when the key was created. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6 | AuthTime | read-write | current |
| juniIsisSysL2CircAuthenticationStartGenerateTime OBJECT-TYPE The date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 | AuthTime | read-write | current |
| juniIsisSysL2CircAuthenticationStopAcceptTime OBJECT-TYPE The date and time when this authentication key will stop being accepted as a valid level 2 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8 | AuthTime | read-write | current |
| juniIsisSysL2CircAuthenticationStopGenerateTime OBJECT-TYPE The date and time when this authentication key will stop being used to authenticate level 2 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9 | AuthTime | read-write | current |
| juniIsisSysL2CircAuthenticationRowStatus OBJECT-TYPE The existence state of this authentication key. This object follows the RowStatus behaviour. | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10 | RowStatus | read-write | current |
| juniIsisCircBFDTable OBJECT-TYPE The Juniper ISIS circuit table describes the BFD-specific characteristics of interfaces. | 1.3.6.1.4.1.4874.2.2.38.1.2.4 | not-accessible | current | |
| juniIsisCircBFDEntry OBJECT-TYPE The Juniper ISIS circuit table describes the BFD-specific characteristics of one interface. | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1 | not-accessible | current | |
| juniIsisCircBfdEnable OBJECT-TYPE This variable indicates whether BFD session on the interface is active or not | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.1 | TruthValue | read-create | current |
| juniIsisCircBfdMinRxInterval OBJECT-TYPE This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.2 | Integer32 (100..65535) | read-create | current |
| juniIsisCircBfdMinTxInterval OBJECT-TYPE This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.3 | Integer32 (100..65535) | read-create | current |
| juniIsisCircBfdMultiplier OBJECT-TYPE This variable specifies detection-multiplier | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.4 | Integer32 (1..255) | read-create | current |
| juniIsisTrapGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.38.2 | |||
| juniIsisConformance OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.38.3 | |||
| juniIsisCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.38.3.1 | |||
| juniIsisMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.38.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| juniIsisCompliance MODULE-COMPLIANCE Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when the juniIsisCircState object was added. | 1.3.6.1.4.1.4874.2.2.38.3.1.1 | obsolete |
| juniIsisCompliance2 MODULE-COMPLIANCE Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when MPSL support was added. | 1.3.6.1.4.1.4874.2.2.38.3.1.2 | obsolete |
| juniIsisCompliance3 MODULE-COMPLIANCE The compliance statement for systems supporting ISIS functionality. This statement became obsolete when juniIsisCircBFDTable is implemented. | 1.3.6.1.4.1.4874.2.2.38.3.1.3 | obsolete |
| juniIsisCompliance4 MODULE-COMPLIANCE The compliance statement for systems supporting ISIS functionality. | 1.3.6.1.4.1.4874.2.2.38.3.1.4 | obsolete |
| juniIsisCompliance5 MODULE-COMPLIANCE The compliance statement for systems supporting ISIS functionality. | 1.3.6.1.4.1.4874.2.2.38.3.1.5 | obsolete |
| juniIsisCompliance6 MODULE-COMPLIANCE The compliance statement for systems supporting ISIS functionality. | 1.3.6.1.4.1.4874.2.2.38.3.1.6 | current |
| juniIsisSystemMgmtGroup OBJECT-GROUP Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS management objects were added. | 1.3.6.1.4.1.4874.2.2.38.3.2.1 | obsolete |
| juniIsisCircuitMgmtGroup OBJECT-GROUP Obsolete circuit management objects. This group became obsolete when the juniIsisCircState object was added. | 1.3.6.1.4.1.4874.2.2.38.3.2.2 | obsolete |
| juniIsisCircuitMgmtGroup2 OBJECT-GROUP The circuit management objects. | 1.3.6.1.4.1.4874.2.2.38.3.2.3 | current |
| juniIsisSystemMgmtGroup2 OBJECT-GROUP Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS tunnel table was added. | 1.3.6.1.4.1.4874.2.2.38.3.2.4 | obsolete |
| juniIsisCircBFDGroup OBJECT-GROUP The circuit level ISIS BFD configuration parameters. | 1.3.6.1.4.1.4874.2.2.38.3.2.5 | current |
| juniIsisSystemMgmtGroup3 OBJECT-GROUP Obsolete system level objects for ISIS management functionality. This group became obsolete when the reference bandwidth related variables were added. | 1.3.6.1.4.1.4874.2.2.38.3.2.6 | obsolete |
| juniIsisSystemMgmtGroup4 OBJECT-GROUP The system level objects for ISIS management functionality. | 1.3.6.1.4.1.4874.2.2.38.3.2.7 | current |