MIBs Depot

Juniper-IP-PROFILE-MIB

Registered at
1.3.6.1.4.1.4874.2.2.26
Last updated
2006-09-08 10:26
Organization
Juniper Networks
Revisions
2006-09-08 10:26, 2005-09-13 17:21, 2004-10-05 14:04, 2003-09-24 15:33, 2002-10-11 13:20, 2001-01-24 20:06, 2000-05-08 00:00, 1999-08-25 00:00
Namespace
juniper
Source file
Juniper-IP-PROFILE-MIB
Digest
sha256:7d983b56212c511143f06e6fecc35e03d2728a1470926b4b86b424ab2aa09423

Description

The IP Profile MIB for the Juniper Networks enterprise.

Contact

Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net

Imports

FromSymbols
IF-MIBInterfaceIndexOrZero
Juniper-MIBsjuniMibs
Juniper-TCJuniEnable, JuniName, JuniSetMap
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
Juniper-IP-PROFILE-MIB
Juniper-MIBs
Juniper-TC
Juniper-UNI-SMI
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
juniIpProfileObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.26.1
juniIpProfile
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.26.1.1
juniIpProfileTable
OBJECT-TYPE
The entries in this table describe profiles for configuring IP interfaces. Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB.
1.3.6.1.4.1.4874.2.2.26.1.1.1not-accessiblecurrent
juniIpProfileEntry
OBJECT-TYPE
A profile describing configuration of an IP interface.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1not-accessiblecurrent
juniIpProfileId
OBJECT-TYPE
The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.1Unsigned32not-accessiblecurrent
juniIpProfileRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. The value of juniIpProfileId must match that of a profile name configured in juniProfileNameTable.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.2RowStatusread-createdeprecated
juniIpProfileRouterName
OBJECT-TYPE
The virtual router to which an IP interface configured by this profile will be assigned, if other mechanisms do not otherwise specify a virtual router assignment.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.3JuniNameread-createcurrent
juniIpProfileIpAddr
OBJECT-TYPE
An IP address to be used by an IP interface configured by this profile. This object will have a value of 0.0.0.0 for an unnumbered interface.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.4IpAddressread-createcurrent
juniIpProfileIpMask
OBJECT-TYPE
An IP address mask to be used by an IP interface configured by this profile. This object will have a value of 0.0.0.0 for an unnumbered interface.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.5IpAddressread-createcurrent
juniIpProfileDirectedBcastEnable
OBJECT-TYPE
Enable/disable forwarding of directed broadcasts on this IP network interface.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.6JuniEnableread-createcurrent
juniIpProfileIcmpRedirectEnable
OBJECT-TYPE
Enable/disable transmission of ICMP Redirect messages on this IP network interface.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.7JuniEnableread-createcurrent
juniIpProfileAccessRoute
OBJECT-TYPE
Enable/disable whether a host route is automatically created for a remote host attached to an IP interface that is configured using this profile.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.8JuniEnableread-createcurrent
juniIpProfileMtu
OBJECT-TYPE
The configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.9Integer32 (0 | 512..10240)read-createcurrent
juniIpProfileLoopbackIfIndex
OBJECT-TYPE
For unnumbered interfaces, the IfIndex of the IP loopback interface whose IP address is used as the source address for transmitted IP packets. A value of zero means the loopback interface is unspecified (e.g., when the interface is numbered).
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.10InterfaceIndexOrZeroread-createobsolete
juniIpProfileLoopback
OBJECT-TYPE
The number of the loopback interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remote access user links. For example, if the loopback interface for the associated router was configured via the console as 'loopback 2', this object would contain the integer value 2. A value of -1 indicates the loopback interface is unspecified, e.g., when the IP interface is numbered. This object has been replaced by juniIpProfileInheritNumString. This object is no longer represented in the juniIpProfileSetMap.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.11Integer32 (-1..2147483647)read-createobsolete
juniIpProfileSetMap
OBJECT-TYPE
A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring JuniSetMap.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.12JuniSetMapread-createcurrent
juniIpProfileSrcAddrValidEnable
OBJECT-TYPE
Enable/disable whether source addresses in received IP packets are validated. Validation is performed by looking up the source IP address in the routing database and determining whether the packet arrived on the expected interface; if not, the packet is discarded.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.13JuniEnableread-createcurrent
juniIpProfileInheritNumString
OBJECT-TYPE
The text identifier of the numbered interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remote access user links. Types/formats/examples for this string include: Loopback loopback <id> 'loopback 0' ATM Virtual Circuit atm <slot>/<port>.<distinguisher> 'atm 3/1.100' Ethernet { fastEthernet | gigabitEthernet } <slot>/<port> 'fastEthernet 3/0' 'gigabitEthernet 3/0' Ethernet VLAN { fastEthernet | gigabitEthernet } <slot>/<port>:<vlanID> 'fastEthernet 3/0:1000' 'gigabitEthernet 3/0:1000' Channelized Serial serial <slot>/<port>:<channelSpecifier>[/<channelSpecifier>]* 'serial 3/0:4' (T1/E1) 'serial 3/0:2/4' (T3/E3) 'serial 3/0:2/1/1/4' (OC3/OC12 - channelized DS3) 'serial 3/0:2/1/1/1/4' (OC3/OC12 - virtual tributaries) Other formats may be supported over time. An empty string indicates the referenced interface is unspecified, e.g., when this IP interface is numbered.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.14DisplayString (SIZE(0..80))read-createcurrent
juniIpProfileTcpMss
OBJECT-TYPE
Configures TCP MSS value for an IP interface. When configured, MSS value of TCP SYN packets received or transmitted on the interface will be compared with the configured value and lowest of the two will replace the value in the packet.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.15Integer32 (0 | 160..10240)read-createcurrent
juniIpProfileFilterOptionsAll
OBJECT-TYPE
Enable/disable whether IP packets containing options are to be discarded or sent to the control plane for processing.
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.16JuniEnableread-createcurrent
juniIpProfileFlowStats
OBJECT-TYPE
Enable/disable whether J-Flow is enabled on the interface
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.17JuniEnableread-createcurrent
juniIpProfileBlockMulticastSources
OBJECT-TYPE
Enable/disable Blocking Multicast traffic
1.3.6.1.4.1.4874.2.2.26.1.1.1.1.18JuniEnableread-createcurrent
juniIpProfileMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.26.4
juniIpProfileMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.26.4.1
juniIpProfileMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.26.4.2

Conformance

NameOIDStatus
juniIpProfileCompliance
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileLoopback replaced juniIpProfileLoopbackIfIndex.
1.3.6.1.4.1.4874.2.2.26.4.1.1obsolete
juniIpProfileCompliance1
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileRowStatus was deprecate and the juniIpProfileSetMap and juniIpProfileSrcAddrValidEnable objects were added.
1.3.6.1.4.1.4874.2.2.26.4.1.2obsolete
juniIpProfileCompliance2
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileLoopback was obsoleted and the juniIpProfileInheritNumString object was added.
1.3.6.1.4.1.4874.2.2.26.4.1.3obsolete
juniIpProfileCompliance3
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileTcpMss was added.
1.3.6.1.4.1.4874.2.2.26.4.1.4obsolete
juniIpProfileCompliance4
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileFilterOptionsAll was added.
1.3.6.1.4.1.4874.2.2.26.4.1.5obsolete
juniIpProfileCompliance5
MODULE-COMPLIANCE
The compliance statement for systems supporting IP configuration profiles, incorporating juniIpProfileFilterOptionsAll.
1.3.6.1.4.1.4874.2.2.26.4.1.6current
juniIpProfileCompliance6
MODULE-COMPLIANCE
The compliance statement for systems supporting IP configuration profiles, incorporating juniIpProfileFlowStats.
1.3.6.1.4.1.4874.2.2.26.4.1.7current
juniIpProfileCompliance7
MODULE-COMPLIANCE
The compliance statement for systems supporting IP configuration profiles, incorporating juniIpProfileBlockMulticastSources.
1.3.6.1.4.1.4874.2.2.26.4.1.8current
juniIpProfileGroup
OBJECT-GROUP
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This group became obsolete when juniIpProfileLoopback replaced juniIpProfileLoopbackIfIndex.
1.3.6.1.4.1.4874.2.2.26.4.2.1obsolete
juniIpProfileGroup1
OBJECT-GROUP
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This group became obsolete when juniIpProfileRowStatus was deprecate and the juniIpProfileSetMap and juniIpProfileSrcAddrValidEnable objects were added.
1.3.6.1.4.1.4874.2.2.26.4.2.2obsolete
juniIpProfileGroup2
OBJECT-GROUP
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became obsolete when juniIpProfileLoopback was obsoleted and the juniIpProfileInheritNumString object was added.
1.3.6.1.4.1.4874.2.2.26.4.2.3obsolete
juniIpProfileDeprecatedGroup
OBJECT-GROUP
Deprecated object providing management of IP Profile functionality in a Juniper product. This group has been deprecated but may still be supported on some implementations.
1.3.6.1.4.1.4874.2.2.26.4.2.4deprecated
juniIpProfileGroup3
OBJECT-GROUP
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became obsolete when juniIpProfileTcpMss was added.
1.3.6.1.4.1.4874.2.2.26.4.2.5obsolete
juniIpProfileGroup4
OBJECT-GROUP
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became osolete when juniIpProfileFilterOptionsAll was added.
1.3.6.1.4.1.4874.2.2.26.4.2.6obsolete
juniIpProfileGroup5
OBJECT-GROUP
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became osolete when juniIpProfileFlowStats was added.
1.3.6.1.4.1.4874.2.2.26.4.2.7obsolete
juniIpProfileGroup6
OBJECT-GROUP
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became obsolete when juniIpProfileBlockMulticastSources was added.
1.3.6.1.4.1.4874.2.2.26.4.2.8obsolete
juniIpProfileGroup7
OBJECT-GROUP
The basic collection of objects providing management of IP Profile functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.26.4.2.9current