Juniper-IP-MIB
- Registered at
- 1.3.6.1.4.1.4874.2.2.12
- Last updated
- 2007-01-17 23:02
- Organization
- Juniper Networks, Inc.
- Revisions
- 2007-01-17 23:02, 2005-03-30 13:49, 2005-04-29 20:37, 2004-09-20 13:49, 2004-09-10 15:26, 2003-11-03 15:26, 2003-06-25 19:48, 2003-02-11 19:05, 2002-10-23 18:53, 2002-04-03 22:06, 2001-07-05 14:00, 2001-06-18 19:11, 2000-07-31 00:00, 1999-11-09 00:00, 1999-09-16 00:00, 1998-11-19 00:00
- Namespace
- juniper
- Source file
Juniper-IP-MIB- Digest
sha256:ab47544a07097a33202cb37059d54912c293066fefd7a333b11ea7197195f141
Description
The IP Protocol MIB for the Juniper Networks enterprise.
Contact
Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 E-mail: mib@Juniper.net
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| IP-FORWARD-MIB | ipCidrRouteEntry, ipCidrRouteNumber |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable, JuniIpAddrLessIf, JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-RTPROTO-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB IP-FORWARD-MIB IP-MIB Juniper-IP-MIB Juniper-MIBs Juniper-TC Juniper-UNI-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| juniIpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1 | |||
| juniIpInterface OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.1 | |||
| juniIpNextIfIndex OBJECT-TYPE Coordinate ifIndex value allocation for entries in juniIpIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. | 1.3.6.1.4.1.4874.2.2.12.1.1.1 | JuniNextIfIndex | read-only | current |
| juniIpIfTable OBJECT-TYPE This table contains entries for IP interfaces present in the system. | 1.3.6.1.4.1.4874.2.2.12.1.1.2 | not-accessible | current | |
| juniIpIfEntry OBJECT-TYPE Each entry describes the characteristics of an IP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1 | not-accessible | current | |
| juniIpIfIndex OBJECT-TYPE The ifIndex of the IP interface. When creating entries in this table, suitable values for this object are determined by reading juniIpNextIfIndex. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.1 | InterfaceIndex | not-accessible | current |
| juniIpIfRowStatus OBJECT-TYPE Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIpIfRowStatus juniIpIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniIpIfIndex must have been determined previously, typically by reading juniIpNextIfIndex. The interface identified by a nonzero juniIpIfLowerIfIndex must exist. If juniIpIfType is configured to be 'loopback' or 'null', juniIpIfLowerIfIndex must be set to zero. The selected value of juniIpIfType must be compatible with the underlying media interface identified by juniIpIfLowerIfIndex. Once created, the following objects may not be modified: juniIpIfLowerIfIndex juniIpIfType juniIpIfTypeId A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.2 | RowStatus | read-create | current |
| juniIpIfLowerIfIndex OBJECT-TYPE The ifIndex of a media interface over which this IP interface is to be layered. A value of zero is used when juniIpIfType is specified to be loopback(4) or null(5). | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.3 | InterfaceIndexOrZero | read-create | current |
| juniIpIfType OBJECT-TYPE The type of network interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.4 | INTEGER {other(0), broadcast(1), pointToPoint(2), nbma(3), loopback(4), null(5), bgpMplsVpn(6), vrfInternal(7), dialout(8)} | read-create | current |
| juniIpIfTypeId OBJECT-TYPE A numerical distinguisher relevant for the loopback and null IP interface types. loopback Must be unique for all IP interfaces of this type. null Must be unique for all IP interfaces of this type. (FOR IMPLEMENTATIONS THAT SUPPORT ONE AND ONLY ONE NULL INTERFACE, THE VALUE ZERO MUST BE USED.) For all other IP interface types, this object is not relevant, reports a value of zero when read, and must be given a value of zero if explicitly configured during creation. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.5 | Unsigned32 | read-create | current |
| juniIpIfSAValidationEnable OBJECT-TYPE Enable/disable source address validation on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.6 | JuniEnable | read-create | current |
| juniIpIfCreationType OBJECT-TYPE Specify if the interface was created due to static configuration or due to some dynamic event. Dynamic interfaces are not stored in NVS. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.7 | INTEGER {static(1), dynamic(2)} | read-only | current |
| juniIpIfProfileId OBJECT-TYPE Identified the profile used when creating a dynamic interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.8 | Unsigned32 | read-only | current |
| juniIpIfAlwaysUp OBJECT-TYPE When enabled, the interface is determined to be up regardless of the state of any lower layer interfaces. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.9 | JuniEnable | read-create | current |
| juniIpIfLoopback OBJECT-TYPE Indicates whether the interface is a loopback type interface. This object has been replaced by juniIpIfInheritNum. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.10 | JuniEnable | read-create | deprecated |
| juniIpIfLoopbackUid OBJECT-TYPE Specify the interface index of a loopback interface whose IP address should be used when sourcing traffic on this interface. Useful for unnumbered interfaces. This object has been replaced by juniIpIfInheritNumUid. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.11 | InterfaceIndexOrZero | read-create | deprecated |
| juniIpIfDebounceTime OBJECT-TYPE Specifies the time in milliseconds that a layer 2 interface must remain in a state before it is conveyed to the IP layer. Useful for interfaces that experience brief outages that should not constitute a route flap. A value of 0 indicates that the feature is disabled. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.12 | Integer32 (0..60000) | read-create | current |
| juniIpIfForwarding OBJECT-TYPE Enable/disable the forwarding of IP traffic to/from this interface. This is currently only applicable to the out-of-band management port. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.13 | JuniEnable | read-create | current |
| juniIpIfForceFragmentation OBJECT-TYPE Force the fragmentation of all IP packets greater than the interface MTU even if the DF bit is set. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.14 | JuniEnable | read-create | current |
| juniIpIfSharesLowerUid OBJECT-TYPE Identifies the interface as sharing a lower interface with another interface vs owning it outright. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.15 | JuniEnable | read-only | current |
| juniIpIfFilterOptions OBJECT-TYPE Bit mask to configure the interface to filter packets with IP header options. Currently, either no bits or all bits may be set. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.16 | Unsigned32 | read-create | current |
| juniIpIfName OBJECT-TYPE Specify the IP interface discriminator for an IP interface not attached to a layer 2 interface with a specific location. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.17 | OCTET STRING (SIZE(0..255)) | read-create | current |
| juniIpIfArpTimeout OBJECT-TYPE Specify the ARP timeout for this interface in seconds. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.18 | Unsigned32 | read-create | current |
| juniIpIfAdminSpeed OBJECT-TYPE Set an administrative speed for the interface that overrides the speed learned from the lower layer. A value of 0 indicates no speed is specified. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.19 | Unsigned32 | read-create | current |
| juniIpIfMultipathMode OBJECT-TYPE Configure the mode this interface should use when forwarding equal-cost multipath traffic. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.20 | INTEGER {hashed(1), roundRobin(2)} | read-create | current |
| juniIpIfSharedNhAddr OBJECT-TYPE The IP address of either a direct or indirect next-hop toward which this shared interface should point. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.21 | IpAddress | read-create | current |
| juniIpIfSharedNhRouterId OBJECT-TYPE The identifier for the domain of a virtual router in which the juniIpIfSharedNhAddr should be resolved. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.22 | Unsigned32 | read-create | current |
| juniIpIfPrimaryIpAddress OBJECT-TYPE The IP address of the primary IP network on an interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.23 | IpAddress | read-only | current |
| juniIpIfPrimaryIpMask OBJECT-TYPE The IP address mask of the primary IP network on an interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.24 | IpAddress | read-only | current |
| juniIpIfOperDebounceTime OBJECT-TYPE Indicates the operational time in milliseconds that a layer2 interface must remain in a state before it is conveyed to the IP layer. Useful for interfaces that experience brief outages that should not constitute a route flap. A value of 0 indicates that the feature is disabled. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.25 | Integer32 (0..60000) | read-only | current |
| juniIpIfRouterIndex OBJECT-TYPE The index or ID of the router. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.26 | Unsigned32 | read-only | current |
| juniIpIfInheritNum OBJECT-TYPE Indicates whether this numbered interface is referenced by unnumbered interfaces. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.27 | JuniEnable | read-only | current |
| juniIpIfInheritNumUid OBJECT-TYPE Specify the interface index of a numbered interface whose IP address should be used when sourcing traffic on this interface. Useful for unnumbered interfaces. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.28 | InterfaceIndexOrZero | read-create | current |
| juniIpIfAnalyzerMode OBJECT-TYPE Used to set the interface to analyzer mode. When enabled(1), all IP packets entering this interface and all non-mirror IP packets leaving this interface will be dropped. The value default(2) specifies that this interface will be the default analyzer port for the virtual-router where the interface resides. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.29 | INTEGER {disable(0), enable(1), default(2)} | read-create | current |
| juniIpIfAutoConfigure OBJECT-TYPE When enabled, IP subscriber interfaces are created dynamically based on any attributes defined in the service-profile and the rules associated with the DCM profile selected for this subscriber. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.30 | JuniEnable | read-create | current |
| juniIpIfTcpMss OBJECT-TYPE Configures TCP MSS value for an IP interface. When configured, MSS value of TCP SYN packets received or transmitted on the interface will be compared with the configured value and lowest of the two will replace the value in the packet. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.31 | Integer32 (0 | 160..10240) | read-create | current |
| juniIpIfInitSeqPrefOper OBJECT-TYPE Indicates the operational warm-restart replay initial sequence preference value for an IP interface. Following an HA SRP switchover, high-preference (value 1) IP interfaces are replayed first, followed by static routes, and then low-preference (value 0) IP interfaces. This allows static routes that are dependent on high-preference interfaces to be resolved and routing protocols to exchange information with peers over high-preference interfaces before low-preference interfaces are replayed. An IP interface is designated as high-preference either (1) implicitly by configuring an IGP or PIM protocol on that interface, or (2) explicitly by juniIpIfInitSeqPrefAdmin (or CLI) configuration. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.32 | Unsigned32 | read-only | current |
| juniIpIfInitSeqPrefAdmin OBJECT-TYPE Configures the warm-restart replay initial sequence preference value for an IP interface. See the juniIpIfInitSeqPrefOper description for more information. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.33 | Unsigned32 (0..1) | read-create | current |
| juniIpIfArpSpoofCheck OBJECT-TYPE When enabled, IP ARP spoof checking is performed on ARP packets received on the IP interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.34 | JuniEnable | read-create | current |
| juniIpIfStatsTable OBJECT-TYPE This table contains entries for IP interfaces present in the system. | 1.3.6.1.4.1.4874.2.2.12.1.1.3 | not-accessible | current | |
| juniIpIfStatsEntry OBJECT-TYPE Each entry contains statistics for an IP interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1 | not-accessible | current | |
| juniIpIfStatsIndex OBJECT-TYPE The ifIndex of the IP interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.1 | InterfaceIndex | not-accessible | current |
| juniIpIfStatsInPackets OBJECT-TYPE The number of packets received on this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.2 | Counter64 | read-only | current |
| juniIpIfStatsInOctets OBJECT-TYPE The number of octets received on this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.3 | Counter64 | read-only | current |
| juniIpIfStatsInPoliciedPackets OBJECT-TYPE The number of packets dropped due to rate limiters attached to this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.4 | Counter64 | read-only | current |
| juniIpIfStatsInPoliciedOctets OBJECT-TYPE The number of octets dropped due to rate limiters attached to this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.5 | Counter64 | read-only | current |
| juniIpIfStatsInErrorPackets OBJECT-TYPE The number of packets received with errors on this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.6 | Counter64 | read-only | current |
| juniIpIfStatsInSpoofedPackets OBJECT-TYPE The number of packets received on this interface with destination unknown. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.7 | Counter64 | read-only | current |
| juniIpIfStatsInForwardedPackets OBJECT-TYPE The number of packets received on this interface that were forwarded by any interface in the system. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.8 | Counter64 | read-only | obsolete |
| juniIpIfStatsInForwardedOctets OBJECT-TYPE The number of octets received on this interface that were forwarded by any interface in the system. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.9 | Counter64 | read-only | obsolete |
| juniIpIfStatsOutForwardedPackets OBJECT-TYPE The number of packets forwarded by this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.10 | Counter64 | read-only | current |
| juniIpIfStatsOutForwardedOctets OBJECT-TYPE The number of octets forwarded by this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.11 | Counter64 | read-only | current |
| juniIpIfStatsOutSchedDropPackets OBJECT-TYPE The number of packets dropped at this interface due to output queue congestion. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.12 | Counter64 | read-only | current |
| juniIpIfStatsOutSchedDropOctets OBJECT-TYPE The number of octets dropped at this interface due to output queue congestion. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.13 | Counter64 | read-only | current |
| juniIpIfStatsOutRequestedPackets OBJECT-TYPE The number of packets requested for transmission at this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.14 | Counter64 | read-only | obsolete |
| juniIpIfStatsOutRequestedOctets OBJECT-TYPE The number of octets requested for transmission at this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.15 | Counter64 | read-only | obsolete |
| juniIpIfStatsOutPoliciedPackets OBJECT-TYPE The number of packets dropped due to rate limiters attached to this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.16 | Counter64 | read-only | current |
| juniIpIfStatsOutPoliciedOctets OBJECT-TYPE The number of octets dropped due to rate limiters attached to this interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.17 | Counter64 | read-only | current |
| juniIpIfStatsGreenOutSchedDropPackets OBJECT-TYPE The number of packets dropped at this interface due to output queue congestion in the green output queue. The green output queue has lowest drop probability. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.18 | Counter64 | read-only | obsolete |
| juniIpIfStatsYellowOutSchedDropPackets OBJECT-TYPE The number of packets dropped at this interface due to output queue congestion in the yellow output queue. The yellow output queue has medium level drop probability. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.19 | Counter64 | read-only | obsolete |
| juniIpIfStatsRedOutSchedDropPackets OBJECT-TYPE The number of packets dropped at this interface due to output queue congestion in the red output queue. The red output queue has highest level drop probability. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.20 | Counter64 | read-only | obsolete |
| juniIpIfStatsGreenOutSchedDropOctets OBJECT-TYPE The number of octets dropped at this interface due to output queue congestion in the green output queue. The green output queue has the lowest drop probability. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.21 | Counter64 | read-only | obsolete |
| juniIpIfStatsYellowOutSchedDropOctets OBJECT-TYPE The number of octets dropped at this interface due to output queue congestion in the yellow output queue. The yellow output queue has the medium drop probability. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.22 | Counter64 | read-only | obsolete |
| juniIpIfStatsRedOutSchedDropOctets OBJECT-TYPE The number of octets dropped at this interface due to output queue congestion in the red output queue. The red output queue has the highest drop probability. | 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.23 | Counter64 | read-only | obsolete |
| juniIpIfAssocTable OBJECT-TYPE This table contains entries of interfaces present in the system. | 1.3.6.1.4.1.4874.2.2.12.1.1.4 | not-accessible | current | |
| juniIpIfAssocEntry OBJECT-TYPE Each entry in this table returns the ifIndex of the IP interface associated with the lower layer ifIndex supplied as the index to this table. The purpose of this table is to translate L2 interfaces to corresponding L3 interfaces for billing applications. Since interesting billing related statistics are kept at L3, it is often useful to know the L2-L3 relationship. Note that this table is not confined to L2-L3 relationships. Any interface sublayer can be used to access this table to determine the relationship with the L3 interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.4.1 | not-accessible | current | |
| juniIpIfAssocLowerIfIndex OBJECT-TYPE The ifIndex of the lower layer interface. | 1.3.6.1.4.1.4874.2.2.12.1.1.4.1.1 | InterfaceIndex | not-accessible | current |
| juniIpIfAssocIpIfIndex OBJECT-TYPE The ifIndex of the IP interface associated with the lower layer juniIpIfAssocLowerIfIndex. In cases where there is not a 1 to 1 relationship between lower layer and higher layer IP interface, a zero value juniIpIfAssocIpIfIndex is returned; this includes the case where an IP interface has not yet been configued at the top of the interface column. An example usage of this table: Assume a user needs to know the ifIndex relationship for all interfaces with the L3 IP interface. Then starting at the bottom of the stack below, the ATM and AAL5's ifIndex would be used to access the table. The agent will return 0 for each of these cases because multiple customer's traffic is demultiplexed at these levels. IP_1 PPP IP_2 ATM1483_1 ATM1483_2 \ / AAL5 ATM If the ATM1483_1 ifIndex is used to access this table, then the value of juniIpIfAssocLowerIfIndex will be set to the ifIndex of IP_1. Similarily, if the ATM1483_2 ifIndex is used to access this table, the juniIpifAssocLowerIfIndex will set to the ifIndex of IP_2. | 1.3.6.1.4.1.4874.2.2.12.1.1.4.1.2 | InterfaceIndexOrZero | read-only | current |
| juniIpAddress OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.2 | |||
| juniIpAddrGlobals OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.2.1 | |||
| juniIpArpTimeout OBJECT-TYPE Timeout, in seconds, for ARP requests issued by this entity. | 1.3.6.1.4.1.4874.2.2.12.1.2.1.1 | Integer32 (1..60) | read-write | obsolete |
| juniIpAddrTable OBJECT-TYPE IP addressing information for this entity's IP network interfaces. Representation of both numbered and unnumbered IP interfaces is supported. | 1.3.6.1.4.1.4874.2.2.12.1.2.2 | not-accessible | current | |
| juniIpAddrEntry OBJECT-TYPE IP addressing information for one of this entity's IP network interfaces. This interface could be either numbered or unnumbered. The following objects correspond to (read-only) counterparts in the IP-MIB ipAddrTable: juniIpAdEntAddr juniIpAdEntIfIndex juniIpAdEntNetMask juniIpAdEntBcastAddr juniIpAdEntReasmMaxSize | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1 | not-accessible | current | |
| juniIpAdEntAddr OBJECT-TYPE The IP address for a numbered IP network interface, if this object's value has the form 'a.b.c.d', where 'a' is nonzero; or, the ifIndex (interpreting the low 24 bits of this value as an integer) of an unnumbered ('address-less') IP interface, if this object's value has the form '0.b.c.d'. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.1 | JuniIpAddrLessIf | not-accessible | current |
| juniIpAdEntIfIndex OBJECT-TYPE The ifIndex of the network interface to which this entry's IP addressing mode pertains. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.2 | InterfaceIndex | read-create | current |
| juniIpAdEntNetMask OBJECT-TYPE The IP subnet mask associated with the IP address of this entry. The network and host bit fields of the mask are filled with 1's and 0's, respectively. If this entry represents an unnumbered IP interface, this object should have a value of all ones. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.3 | IpAddress | read-create | current |
| juniIpAdEntBcastAddr OBJECT-TYPE The value of the least-significant bit in the IP broadcast address used for sending datagrams on the IP network interface associated with this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.4 | Integer32 (0..1) | read-only | current |
| juniIpAdEntReasmMaxSize OBJECT-TYPE The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.5 | Integer32 (0..65535) | read-only | current |
| juniIpAdEntRowStatus OBJECT-TYPE Controls the creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create entries for both numbered and unnumbered IP interfaces, the following entry objects MUST be explicitly configured: juniIpAdEntRowStatus juniIpAdEntIfIndex To create an entry for a numbered IP interface, the following conditions must also hold: <none> To create an entry for an unnumbered IP interface, the following conditions must also hold: juniIpAdEntUnnumInheritNumIfIndex must be configured with a nonzero ifIndex value of an IP numbered interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.6 | RowStatus | read-create | current |
| juniIpAdEntAdminStatus OBJECT-TYPE Enable/disable operation of IP on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.7 | JuniEnable | read-create | current |
| juniIpAdEntArpRspEnable OBJECT-TYPE Enable/disable ARP response on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.8 | JuniEnable | read-create | current |
| juniIpAdEntProxyArpRspEnable OBJECT-TYPE Enable/disable proxy ARP response on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.9 | JuniEnable | read-create | current |
| juniIpAdEntIgmpEnable OBJECT-TYPE Enable/disable IGMP operation on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.10 | JuniEnable | read-create | deprecated |
| juniIpAdEntDirectedBcastEnable OBJECT-TYPE Enable/disable forwarding of directed broadcasts on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.11 | JuniEnable | read-create | current |
| juniIpAdEntIcmpRedirectEnable OBJECT-TYPE Enable/disable transmission of ICMP Redirect messages on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.12 | JuniEnable | read-create | current |
| juniIpAdEntIcmpMaskReplyEnable OBJECT-TYPE Enable/disable transmission of ICMP Mask Reply messages on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.13 | JuniEnable | read-create | current |
| juniIpAdEntIcmpUnreachEnable OBJECT-TYPE Enable/disable transmission of ICMP Unreachable messages on this IP network interface. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.14 | JuniEnable | read-create | current |
| juniIpAdEntMtu OBJECT-TYPE The configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.15 | Integer32 (0..65535) | read-create | current |
| juniIpAdEntUnnumLoopbackIfIndex OBJECT-TYPE For unnumbered interfaces, the ifIndex of the IP loopback interface whose IP address is used as the source IP address for IP packets transmitted on the unnumbered network. For numbered interfaces, this object has a value of zero. This object has been replaced by juniIpAdEntUnnumInheritNumIfIndex. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.16 | InterfaceIndexOrZero | read-create | deprecated |
| juniIpAdEntIrdpEnable OBJECT-TYPE Controls whether ICMP Router Discovery Protocol operation is permitted to be sent on this network. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.17 | JuniEnable | read-create | current |
| juniIpAdEntAccessRouteEnable OBJECT-TYPE If enabled, then establishment/loss of a point-to-point network connection causes a host route for the remote host to be created/deleted automatically. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.18 | JuniEnable | read-create | current |
| juniIpAdEntAccessRouteHost OBJECT-TYPE If an access route has been established, the IP address of the remote host is reported by this object; otherwise, this object contains the value 0.0.0.0. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.19 | IpAddress | read-only | current |
| juniIpAdEntIsSecondary OBJECT-TYPE If enabled, then the IP address corresponding to this entry is a secondary address. If disabled, then the IP address corresponding to this entry is te primary address. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.20 | JuniEnable | read-create | current |
| juniIpAdEntUnnumInheritNumIfIndex OBJECT-TYPE For unnumbered interfaces, the ifIndex of the IP numbered interface whose IP address is used as the source IP address for IP packets transmitted on the unnumbered network. For numbered interfaces, this object has a value of zero. | 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.21 | InterfaceIndexOrZero | read-create | current |
| juniIpRoute OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.3 | |||
| juniIpRouteGlobals OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.3.1 | |||
| juniIpRouteLimit OBJECT-TYPE Maximum number of IP routes maintained by this entity. Setting a value lower than the current number of routes prevents additional routes from being learned or configured, but does not cause existing excess routes to be deleted to enforce the new limit. | 1.3.6.1.4.1.4874.2.2.12.1.3.1.1 | Integer32 | read-write | obsolete |
| juniIpRouteTableLimit OBJECT-TYPE The VRF Route Table Maximum Number of Routes Limit. | 1.3.6.1.4.1.4874.2.2.12.1.3.1.2 | Unsigned32 | read-write | current |
| juniIpRouteTableWarnPercent OBJECT-TYPE The VRF Route Table Percentage of the Route Limit at which to issue a warning. The percentage is only valid when juniIpRouteTableWarnOnly is false. It must be set to 0 if juniIpRouteTableWarnOnly is true. | 1.3.6.1.4.1.4874.2.2.12.1.3.1.3 | Unsigned32 (0..100) | read-write | current |
| juniIpRouteTableWarnOnly OBJECT-TYPE The VRF Route Table Maximum Number of Routes Warning flag. Do not actually limit the number of routes in the table | 1.3.6.1.4.1.4874.2.2.12.1.3.1.4 | TruthValue | read-write | current |
| juniIpRouteTableWarnThreshold OBJECT-TYPE The computed number of route to issue a warning. If juniIpRouteTableWarnOnly is true this value will be juniIpRouteTableLimit and if juniIpRouteTableWarnOnly is false it will be juniIpRouteTableLimit * juniIpRouteTableWarnPercentage | 1.3.6.1.4.1.4874.2.2.12.1.3.1.5 | Unsigned32 | read-only | current |
| juniIpRouteStaticTable OBJECT-TYPE Table of static routes configured on this entity. The object definitions and indexing for this table are chosen to closely align with the IP-FORWARD-MIB's ipCidrRouteTable. This table serves three purposes: 1. Provide the means for configuring static routes. 2. Provide an efficient view of static routes (otherwise they must be observed by traversing the entire routing table). 3. Provide view of static routes configured on network interfaces that are currently inactive. (In this implementation, static routes configured on inactive interfaces are not visible in the routing table.) | 1.3.6.1.4.1.4874.2.2.12.1.3.2 | not-accessible | current | |
| juniIpRouteStaticEntry OBJECT-TYPE A static route. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1 | not-accessible | current | |
| juniIpRouteStaticDest OBJECT-TYPE The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the juniIpRouteStaticMask object is not equal to x. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.1 | IpAddress | read-only | current |
| juniIpRouteStaticMask OBJECT-TYPE Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the juniIpRouteStaticDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the juniIpRouteStaticMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the juniIpRouteStaticDest object is not equal to juniIpRouteStaticDest. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.2 | IpAddress | read-only | current |
| juniIpRouteStaticPref OBJECT-TYPE The preference of this static route. Higher values correspond to higher preference. A static route with preference of zero will never be installed as an active route. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.3 | Integer32 (0..255) | read-only | current |
| juniIpRouteStaticNextHop OBJECT-TYPE The address of the next hop toward the destination. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.4 | JuniIpAddrLessIf | read-only | current |
| juniIpRouteStaticRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.5 | RowStatus | read-create | current |
| juniIpRouteStaticIfIndex OBJECT-TYPE The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of zero means the router should automatically determine the interface through which the specified next-hop address is reached. An implementation may disallow non-zero values from being configured. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.6 | Integer32 | read-create | current |
| juniIpRouteStaticStatus OBJECT-TYPE The operational status of this static route. active(0) indicates this route is currently being used to reach the specified destination. inactive(1) indicates this route is considered valid, but currently is superseded by another routing table entry for the destination, having a higher preference value. incomplete(2) indicates this route entry contains information that is incomplete, or is inconsistent with other system configuration (for example, the interface specified in juniIpRouteStaticIfIndex does not exist). | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.7 | INTEGER {active(0), inactive(1), incomplete(2)} | read-only | current |
| juniIpRouteStaticNextHopAS OBJECT-TYPE The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.8 | Integer32 | read-create | current |
| juniIpRouteStaticMetric OBJECT-TYPE The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.9 | Integer32 | read-create | current |
| juniIpRouteStaticTag OBJECT-TYPE A tag value for this static route. | 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.10 | Unsigned32 | read-create | current |
| juniIpCidrRouteTable OBJECT-TYPE Table of routes active on this entity. This table is an augmentation of the IP-FORWARD-MIB's ipCidrRouteTable. | 1.3.6.1.4.1.4874.2.2.12.1.3.3 | not-accessible | current | |
| juniIpCidrRouteEntry OBJECT-TYPE Additional attributes of an active route. | 1.3.6.1.4.1.4874.2.2.12.1.3.3.1 | not-accessible | current | |
| juniIpCidrRoutePref OBJECT-TYPE The preference of this route. Higher values correspond to higher preference. | 1.3.6.1.4.1.4874.2.2.12.1.3.3.1.1 | Integer32 (0..255) | read-only | current |
| juniIpCidrRouteArea OBJECT-TYPE The Area to which this route pertains. A value of 0.0.0.0 indicates no area is identified. | 1.3.6.1.4.1.4874.2.2.12.1.3.3.1.2 | IpAddress | read-only | current |
| juniIpCidrRouteTag OBJECT-TYPE A tag value for this route. | 1.3.6.1.4.1.4874.2.2.12.1.3.3.1.3 | Unsigned32 | read-only | current |
| juniIpRouteStaticBFDTable OBJECT-TYPE The Juniper IP interface table describes the BFD-specific characteristics of interfaces. | 1.3.6.1.4.1.4874.2.2.12.1.3.4 | not-accessible | current | |
| juniIpRouteStaticBFDEntry OBJECT-TYPE The Juniper IP interface table describes the BFD-specific characteristics of one interface. | 1.3.6.1.4.1.4874.2.2.12.1.3.4.1 | not-accessible | current | |
| juniIpRouteStaticBfdEnable OBJECT-TYPE This variable indicates whether BFD session on the interface is active or not | 1.3.6.1.4.1.4874.2.2.12.1.3.4.1.1 | TruthValue | read-create | current |
| juniIpRouteStaticBfdMinRxInterval OBJECT-TYPE This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] | 1.3.6.1.4.1.4874.2.2.12.1.3.4.1.2 | Integer32 (100..65535) | read-create | current |
| juniIpRouteStaticBfdMinTxInterval OBJECT-TYPE This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] | 1.3.6.1.4.1.4874.2.2.12.1.3.4.1.3 | Integer32 (100..65535) | read-create | current |
| juniIpRouteStaticBfdMultiplier OBJECT-TYPE This variable specifies detection-multiplier | 1.3.6.1.4.1.4874.2.2.12.1.3.4.1.4 | Integer32 (1..255) | read-create | current |
| juniIpGlobals OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.4 | |||
| juniIpDebounceTime OBJECT-TYPE The time in milliseconds that an event has to be in the same state before being reported. | 1.3.6.1.4.1.4874.2.2.12.1.4.1 | Integer32 (0..60000) | read-write | current |
| juniIpRouterId OBJECT-TYPE The router-id that this IP router will use to identify itself. | 1.3.6.1.4.1.4874.2.2.12.1.4.2 | IpAddress | read-write | current |
| juniIpSourceRoutingAdminStatus OBJECT-TYPE The administrative setting for source routing. | 1.3.6.1.4.1.4874.2.2.12.1.4.3 | JuniEnable | read-write | current |
| juniIpVpnIdOui OBJECT-TYPE The OUI portion of the VPN identifier. This object must be set coincident with the index portion of the VpnId (juniIpVpnIdIndex), otherwise the set will fail. | 1.3.6.1.4.1.4874.2.2.12.1.4.4 | Integer32 (0..16777215) | read-write | obsolete |
| juniIpVpnIdIndex OBJECT-TYPE The index portion of the VPN identifier. This object must be set coincident with the OUI portion of the VpnId (juniIpVpnOui), otherwise the set will fail. | 1.3.6.1.4.1.4874.2.2.12.1.4.5 | IpAddress | read-write | obsolete |
| juniIpBgpCommunityNewFormat OBJECT-TYPE The BGP community format to be used. Set to true to use the community number, as number format. | 1.3.6.1.4.1.4874.2.2.12.1.4.6 | TruthValue | read-write | current |
| juniIpBgpAsConfedSetNewFormat OBJECT-TYPE The BGP as confederation set format to be used. Set to true to display the confederation set as a comma separated list, enclosed in squared braces. | 1.3.6.1.4.1.4874.2.2.12.1.4.7 | TruthValue | read-write | current |
| juniIpIfSummary OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.5 | |||
| juniIpIfSummaryTotalIntf OBJECT-TYPE The total number of IP interfaces. | 1.3.6.1.4.1.4874.2.2.12.1.5.1 | Gauge32 | read-only | current |
| juniIpIfSummaryTotalIntfUp OBJECT-TYPE The total number of IP interfaces in operational state UP. | 1.3.6.1.4.1.4874.2.2.12.1.5.2 | Gauge32 | read-only | current |
| juniIpIfSummaryTotalIntfDown OBJECT-TYPE The total number of IP interfaces in operational state DOWN. | 1.3.6.1.4.1.4874.2.2.12.1.5.3 | Gauge32 | read-only | current |
| juniIpIfSummaryTotalIntfProtUp OBJECT-TYPE The total number of IP interfaces in protocol state UP. | 1.3.6.1.4.1.4874.2.2.12.1.5.4 | Gauge32 | read-only | current |
| juniIpIfSummaryTotalIntfProtDown OBJECT-TYPE The total number of IP interfaces in protocol state DOWN. | 1.3.6.1.4.1.4874.2.2.12.1.5.5 | Gauge32 | read-only | current |
| juniIpIfSummaryTotalIntfProtNotPresent OBJECT-TYPE The total number of IP interfaces in protocol state NOT PRESENT. | 1.3.6.1.4.1.4874.2.2.12.1.5.6 | Gauge32 | read-only | current |
| juniIpRouteSummary OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.6 | |||
| juniIpRouteUnicastSummary OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.6.1 | |||
| juniIpRouteSummaryUnicastTotalRoutes OBJECT-TYPE The total number of Unicast IP routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.1 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastTotalBytes OBJECT-TYPE Total number of bytes in unicast route entries. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.2 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastIsisRoutes OBJECT-TYPE The total number of Unicast IP ISIS routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.3 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastIsisLevel1Routes OBJECT-TYPE The total number of Unicast IP Level 1 ISIS routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.4 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastIsisLevel2Routes OBJECT-TYPE The total number of Unicast IP Level 2 ISIS routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.5 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastRipRoutes OBJECT-TYPE The total number of Unicast IP RIP routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.6 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastStaticRoutes OBJECT-TYPE The total number of Unicast IP Static routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.7 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastConnectedRoutes OBJECT-TYPE The total number of Unicast IP Connected routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.8 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastBgpRoutes OBJECT-TYPE The total number of Unicast IP BGP routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.9 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastOspfRoutes OBJECT-TYPE The total number of Unicast IP OSPF routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.10 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastIntraAreaOspfRoutes OBJECT-TYPE The total number of Unicast IP Intra Area OSPF routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.11 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastInterAreaOspfRoutes OBJECT-TYPE The total number of Unicast IP Inter Area OSPF routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.12 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastExternalOspfRoutes OBJECT-TYPE The total number of Unicast IP External OSPF routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.13 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastOtherInternalRoutes OBJECT-TYPE The total number of Unicast IP Other Internal routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.14 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastAccessRoutes OBJECT-TYPE The total number of Unicast IP Access routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.15 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastIntCreatedAccessHostRoutes OBJECT-TYPE The total number of Unicast IP Internally Created Access Host routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.16 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastIntDialoutRoutes OBJECT-TYPE The total number of Unicast IP Internally Created Dialout routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.17 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastRouteMemoryActive OBJECT-TYPE Unicast IP Route Memory Storage. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.18 | Gauge32 | read-only | current |
| juniIpRouteSummaryUnicastLastRouteAddedOrDeletedIP OBJECT-TYPE IP address for last Unicast route added or deleted. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.19 | IpAddress | read-only | current |
| juniIpRouteSummaryUnicastLastRouteAddedOrDeletedMask OBJECT-TYPE Subnet mask for last Unicast route added or deleted. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.20 | IpAddress | read-only | current |
| juniIpRouteSummaryUnicastLastRouteAddedOrDeletedClient OBJECT-TYPE Client for last Unicast route added or deleted. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.21 | INTEGER {inValid(0), isis(1), rip(2), ospf(3), static(4), local(5), bgp(6), mbgp(7), staticLow(8), ospfInternal(9), ospfExternal(10), dvmrp(11), dvmrpAggregate(12), hidden(13), access(14), accessInternal(15), dialOut(16), default(17)} | read-only | current |
| juniIpRouteSummaryUnicastLastRouteAddedOrDeletedDate OBJECT-TYPE Date for last Unicast route added or deleted. | 1.3.6.1.4.1.4874.2.2.12.1.6.1.22 | OCTET STRING (SIZE(0..30)) | read-only | current |
| juniIpRouteMulticastSummary OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.1.6.2 | |||
| juniIpRouteSummaryMulticastTotalRoutes OBJECT-TYPE The total number of Multicast IP routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.1 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastTotalBytes OBJECT-TYPE Total number of bytes in multicast route entries. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.2 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastIsisRoutes OBJECT-TYPE The total number of Multicast IP ISIS routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.3 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastLevel1IsisRoutes OBJECT-TYPE The total number of Multicast IP Level 1 ISIS routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.4 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastLevel2IsisRoutes OBJECT-TYPE The total number of Multicast IP Level 2 ISIS routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.5 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastRipRoutes OBJECT-TYPE The total number of Multicast IP RIP routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.6 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastStaticRoutes OBJECT-TYPE The total number of Multicast IP Static routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.7 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastConnectedRoutes OBJECT-TYPE The total number of Multicast IP Connected routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.8 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastBgpRoutes OBJECT-TYPE The total number of Multicast IP BGP routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.9 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastOspfRoutes OBJECT-TYPE The total number of Multicast IP OSPF routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.10 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastIntraAreaOspfRoutes OBJECT-TYPE The total number of Multicast IP Intra Area OSPF routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.11 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastInterAreaOspfRoutes OBJECT-TYPE The total number of Multicast IP Inter Area OSPF routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.12 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastExternalOspfRoutes OBJECT-TYPE The total number of Multicast IP External OSPF routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.13 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastOtherInternalRoutes OBJECT-TYPE The total number of Multicast IP Other Internal routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.14 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastAccessRoutes OBJECT-TYPE The total number of Multicast IP Access routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.15 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastIntCreatedAccessHostRoutes OBJECT-TYPE The total number of Multicast IP Internally Created Access Host routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.16 | Gauge32 | read-only | current |
| juniIpRouteSummaryMultiastIntDialoutRoutes OBJECT-TYPE The total number of Multicast IP Internally Created Dialout routes. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.17 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastRouteMemoryActive OBJECT-TYPE Multicast IP Route Memory Storage. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.18 | Gauge32 | read-only | current |
| juniIpRouteSummaryMulticastLastRouteAddedOrDeletedIP OBJECT-TYPE IP address for last Multicast route added or deleted. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.19 | IpAddress | read-only | current |
| juniIpRouteSummaryMulticastLastRouteAddedOrDeletedMask OBJECT-TYPE Subnet Mask for last Multicast route added or deleted. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.20 | IpAddress | read-only | current |
| juniIpRouteSummaryMulticastLastRouteAddedOrDeletedClient OBJECT-TYPE Client for last Multicast route added or deleted. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.21 | INTEGER {inValid(0), isis(1), rip(2), ospf(3), static(4), local(5), bgp(6), mbgp(7), staticLow(8), ospfInternal(9), ospfExternal(10), dvmrp(11), dvmrpAggregate(12), hidden(13), access(14), accessInternal(15), dialOut(16), default(17)} | read-only | current |
| juniIpRouteSummaryMulticastLastRouteAddedOrDeletedDate OBJECT-TYPE Date for last Multicast route added or deleted. | 1.3.6.1.4.1.4874.2.2.12.1.6.2.22 | OCTET STRING (SIZE(0..30)) | read-only | current |
| juniIpTrapEnables OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.2 | |||
| juniIpSaValidateTrapEnable OBJECT-TYPE Set to true to enable source address validation traps. | 1.3.6.1.4.1.4874.2.2.12.2.1 | TruthValue | read-write | current |
| juniIpTraps OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.3 | |||
| juniIpTrapPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.3.0 | |||
| juniIpMIBNotificationObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.3.1 | |||
| juniIpIfSaValFailSrcIpAddr OBJECT-TYPE The source IP address of the packet that caused the last source address validation failure on the IP interface. | 1.3.6.1.4.1.4874.2.2.12.3.1.1 | IpAddress | accessible-for-notify | current |
| juniIpIfSaValFailDestIpAddr OBJECT-TYPE The destination IP address of the packet that caused the last source address validation failure on the IP interface. | 1.3.6.1.4.1.4874.2.2.12.3.1.2 | IpAddress | accessible-for-notify | current |
| juniIpConformance OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.4 | |||
| juniIpCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.4.1 | |||
| juniIpGroups OBJECT-IDENTITY | 1.3.6.1.4.1.4874.2.2.12.4.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| juniIpRouteTableTrapRouteLimitExceeded NOTIFICATION-TYPE The juniIpRouteTableTrapRouteLimitExceeded Trap indicates that the configured route Table Limit has been exceeded. Issued once every 5 minutes that the limit is being exceeded. | 1.3.6.1.4.1.4874.2.2.12.3.0.1 | current |
| juniIpRouteTableTrapRouteLimitRemove NOTIFICATION-TYPE The juniIpRouteTableTrapRouteTableLimitRemove Trap indicates that routes have been freed up for 30 seconds and the Route Table Limit is no longer being violated. Issued once. | 1.3.6.1.4.1.4874.2.2.12.3.0.2 | current |
| juniIpRouteTableTrapWarnThresholdExceeded NOTIFICATION-TYPE The juniIpRouteTableTrapWarnThresholdExceeded Trap indicates that the computed warning threshold has been exceeded. Issued once every 5 minutes that the warning threshold is being execeeded. | 1.3.6.1.4.1.4874.2.2.12.3.0.3 | current |
| juniIpTrapSaValidationFailure NOTIFICATION-TYPE The juniIpTrapSaValidationFailure Trap indicates that a source address validation failure occurred on an interface. The interface on which the failure occurred, the source ip address and the destination ip address of the packet causing the failure are returned. | 1.3.6.1.4.1.4874.2.2.12.3.0.4 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| juniIpCompliance MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when the IP interface and IP address groups changed and the global objects were added. | 1.3.6.1.4.1.4874.2.2.12.4.1.1 | obsolete |
| juniIpCompliance2 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when the juniIpIfAssocTable was added. | 1.3.6.1.4.1.4874.2.2.12.4.1.2 | obsolete |
| juniIpCompliance3 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when the QoS related objects were obsoleted. | 1.3.6.1.4.1.4874.2.2.12.4.1.3 | obsolete |
| juniIpCompliance4 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when the QoS related objects were obsoleted. | 1.3.6.1.4.1.4874.2.2.12.4.1.4 | obsolete |
| juniIpCompliance5 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when support was added for router index and unnumbered interfaces referencing numbered interfaces. | 1.3.6.1.4.1.4874.2.2.12.4.1.5 | obsolete |
| juniIpCompliance6 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when interface mirroring and interface auto configure support was added. | 1.3.6.1.4.1.4874.2.2.12.4.1.6 | obsolete |
| juniIpCompliance7 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when interface TCP MSS feature was added. | 1.3.6.1.4.1.4874.2.2.12.4.1.7 | obsolete |
| juniIpCompliance8 MODULE-COMPLIANCE Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when juniIpVpnIdOui and juniIpVpnIdIndex were obsoleted. | 1.3.6.1.4.1.4874.2.2.12.4.1.8 | obsolete |
| juniIpCompliance9 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper IP MIB. | 1.3.6.1.4.1.4874.2.2.12.4.1.9 | obsolete |
| juniIpCompliance10 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper IP MIB. | 1.3.6.1.4.1.4874.2.2.12.4.1.10 | obsolete |
| juniIpCompliance11 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when juniIpVpnIdOui and juniIpVpnIdIndex were obsoleted. | 1.3.6.1.4.1.4874.2.2.12.4.1.11 | obsolete |
| juniIpCompliance12 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when juniIpIfInitSeqPrefOper and juniIpIfInitSeqPrefAdmin were added. | 1.3.6.1.4.1.4874.2.2.12.4.1.12 | obsolete |
| juniIpCompliance13 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when juniIpIfArpSpoofCheck was added. | 1.3.6.1.4.1.4874.2.2.12.4.1.13 | obsolete |
| juniIpCompliance14 MODULE-COMPLIANCE The compliance statement for entities which implement the Juniper IP MIB. | 1.3.6.1.4.1.4874.2.2.12.4.1.14 | current |
| juniIpInterfaceGroup OBJECT-GROUP Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when new objects were added to the juniIpIfTable and the juniIpIfStatsTable. | 1.3.6.1.4.1.4874.2.2.12.4.2.1 | obsolete |
| juniIpAddressGroup OBJECT-GROUP Obsolete collection of objects for managing IP address capabilities in a Juniper product. This group became obsolete when juniIpAdEntIgmpEnable was deprecated and juniIpAdEntIsSecondary was added. | 1.3.6.1.4.1.4874.2.2.12.4.2.2 | obsolete |
| juniIpRouteGroup OBJECT-GROUP Obsolete collection of objects for managing IP routing capabilities in a Juniper product. This group became obsolete when juniIpRouteLimit was obsoleted. | 1.3.6.1.4.1.4874.2.2.12.4.2.3 | obsolete |
| juniIpGlobalGroup OBJECT-GROUP Obsolete collection of IP global objects for managing instances of IP in a Juniper product. This group became obsolete when BGP new format objects were added. | 1.3.6.1.4.1.4874.2.2.12.4.2.4 | obsolete |
| juniIpInterfaceGroup2 OBJECT-GROUP Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfAssocTable was added. | 1.3.6.1.4.1.4874.2.2.12.4.2.5 | obsolete |
| juniIpAddressGroup2 OBJECT-GROUP Obsolete collection of objects for managing IP address capabilities in a Juniper product. This group became obsolete when when juniIpArpTimeout was obsoleted. | 1.3.6.1.4.1.4874.2.2.12.4.2.6 | obsolete |
| juniIpInterfaceGroup3 OBJECT-GROUP Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the QoS related objects were obsoleted. | 1.3.6.1.4.1.4874.2.2.12.4.2.7 | obsolete |
| juniIpInterfaceGroup4 OBJECT-GROUP Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfInheritNum and juniIpIfInheritNumUid objects were added and juniIpIfLoopback and juniIpIfLoopbackUid were deprecated. | 1.3.6.1.4.1.4874.2.2.12.4.2.8 | obsolete |
| juniIpAddressGroup3 OBJECT-GROUP Obsolete collection of objects for managing IP address capabilities in a Juniper product. This group became obsolete when the juniIpAdEntUnnumInheritNumIfIndex object was added and juniIpAdEntUnnumLoopbackIfIndex was deprecated. | 1.3.6.1.4.1.4874.2.2.12.4.2.9 | obsolete |
| juniIpRouteGroup2 OBJECT-GROUP A collection of objects for managing IP routing capabilities in a Juniper product. | 1.3.6.1.4.1.4874.2.2.12.4.2.10 | obsolete |
| juniIpGlobalGroup2 OBJECT-GROUP Obsolete collection of IP global objects for managing instances of IP in a Juniper product. This group became obsolete when juniIpVpnIdOui and juniIpVpnIdIndex were obsoleted. | 1.3.6.1.4.1.4874.2.2.12.4.2.11 | obsolete |
| juniIpInterfaceGroup5 OBJECT-GROUP Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfAnalyzerMode object was added. | 1.3.6.1.4.1.4874.2.2.12.4.2.12 | obsolete |
| juniIpAddressGroup4 OBJECT-GROUP A collection of objects for managing IP address capabilities in a Juniper product. | 1.3.6.1.4.1.4874.2.2.12.4.2.13 | current |
| juniIpInterfaceDeprecatedGroup OBJECT-GROUP A collection of deprecated objects for managing IP interface capabilities in a Juniper product. This group may continue to be support on some products. | 1.3.6.1.4.1.4874.2.2.12.4.2.14 | deprecated |
| juniIpAddressDeprecatedGroup OBJECT-GROUP A collection of deprecated objects for managing IP address capabilities in a Juniper product. This group may continue to be support on some products. | 1.3.6.1.4.1.4874.2.2.12.4.2.15 | deprecated |
| juniIpInterfaceGroup6 OBJECT-GROUP Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfTcpMss object was added. | 1.3.6.1.4.1.4874.2.2.12.4.2.16 | obsolete |
| juniIpIfSummaryGroup OBJECT-GROUP A collection of IP Interface Summary Statistics. | 1.3.6.1.4.1.4874.2.2.12.4.2.17 | current |
| juniIpInterfaceGroup7 OBJECT-GROUP Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfInitSeqPrefOper and juniIpIfInitSeqPrefAdmin objects were added. | 1.3.6.1.4.1.4874.2.2.12.4.2.18 | obsolete |
| juniIpGlobalGroup3 OBJECT-GROUP A collection of IP global objects for managing instances of IP in a Juniper product. | 1.3.6.1.4.1.4874.2.2.12.4.2.19 | current |
| juniIpRouteGroup3 OBJECT-GROUP A collection of objects for managing IP routing capabilities in a Juniper product. | 1.3.6.1.4.1.4874.2.2.12.4.2.20 | current |
| juniIpNotificationGroup NOTIFICATION-GROUP The management notifications pertaining to IP Route Table state changes. | 1.3.6.1.4.1.4874.2.2.12.4.2.21 | obsolete |
| juniIpNotificationGroup1 NOTIFICATION-GROUP The management notifications pertaining to IP. | 1.3.6.1.4.1.4874.2.2.12.4.2.22 | current |
| juniIpMIBNotificationObjectsGroup OBJECT-GROUP The management notification objects pertaining to IP. | 1.3.6.1.4.1.4874.2.2.12.4.2.23 | current |
| juniIpRouteSummaryGroup OBJECT-GROUP The management notifications pertaining to IP Route Table state changes. | 1.3.6.1.4.1.4874.2.2.12.4.2.24 | current |
| juniIpRouteStaticBFDGroup OBJECT-GROUP The management notifications pertaining to IP Route Table state changes. | 1.3.6.1.4.1.4874.2.2.12.4.2.25 | current |
| juniIpInterfaceGroup8 OBJECT-GROUP A collection of objects for managing IP interface capabilities in a Juniper product. | 1.3.6.1.4.1.4874.2.2.12.4.2.26 | obsolete |
| juniIpInterfaceGroup9 OBJECT-GROUP A collection of objects for managing IP interface capabilities in a Juniper product. | 1.3.6.1.4.1.4874.2.2.12.4.2.27 | current |