MIBs Depot

Juniper-FRACTIONAL-T1-MIB

Registered at
1.3.6.1.4.1.4874.2.2.6
Last updated
2002-09-16 21:44
Organization
Juniper Networks, Inc.
Revisions
2002-09-16 21:44, 2000-09-26 17:30, 1999-07-14 00:00, 1998-11-13 00:00
Namespace
juniper
Source file
Juniper-FRACTIONAL-T1-MIB
Digest
sha256:3caca93198319c59c46af0a5b2921ee065bcab0eb84fab6738db1bf3f9146fe8

Description

The Fractional T1 MIB for the Juniper Networks enterprise.

Contact

Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net

Imports

FromSymbols
IF-MIBInterfaceIndex, InterfaceIndexOrZero
Juniper-MIBsjuniMibs
Juniper-TCJuniNextIfIndex, JuniTimeSlotMap
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
Juniper-FRACTIONAL-T1-MIB
Juniper-MIBs
Juniper-TC
Juniper-UNI-SMI
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
juniFt1Objects
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.6.1
juniFt1NextIfIndex
OBJECT-TYPE
Coordinate ifIndex value allocation for entries in juniFt1IfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
1.3.6.1.4.1.4874.2.2.6.1.1JuniNextIfIndexread-onlycurrent
juniFt1IfTable
OBJECT-TYPE
This table contains entries for FT1 interfaces present in the system.
1.3.6.1.4.1.4874.2.2.6.1.2not-accessiblecurrent
juniFt1IfEntry
OBJECT-TYPE
Each entry describes the characteristics of an FT1 interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/juniIfTable.
1.3.6.1.4.1.4874.2.2.6.1.2.1not-accessiblecurrent
juniFt1IfIndex
OBJECT-TYPE
The ifIndex of the FT1 interface. When creating entries in this table, suitable values for this object are determined by reading juniFt1NextIfIndex.
1.3.6.1.4.1.4874.2.2.6.1.2.1.1InterfaceIndexnot-accessiblecurrent
juniFt1IfRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniFt1IfRowStatus juniFt1IfLowerIfIndex juniFt1IfTimeSlotMap In addition, when creating an entry the following conditions must hold: A value for juniFt1IfIndex must have been determined previously, by reading juniFt1NextIfIndex. The DS1 interface identified by juniFt1IfLowerIfIndex must exist. The DS0s specified in juniFt1IfTimeSlotMap must be available (unallocated) on the DS1 interface identified by juniFt1IfLowerIfIndex. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.
1.3.6.1.4.1.4874.2.2.6.1.2.1.2RowStatusread-createcurrent
juniFt1IfLowerIfIndex
OBJECT-TYPE
The ifIndex of a DS1 interface over which this FT1 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
1.3.6.1.4.1.4874.2.2.6.1.2.1.3InterfaceIndexOrZeroread-createcurrent
juniFt1IfTimeSlotMap
OBJECT-TYPE
A bitmap representing the DS0s on the underlying DS1 interface that have been allocated to this FT1 interface.
1.3.6.1.4.1.4874.2.2.6.1.2.1.4JuniTimeSlotMapread-createcurrent
juniFt1IfTimeSlotRate
OBJECT-TYPE
Data rate per time slot allocated to this FT1 interface.
1.3.6.1.4.1.4874.2.2.6.1.2.1.5INTEGER {nx56kbps(0), nx64kbps(1)}read-createcurrent
juniFt1IfDataPolarity
OBJECT-TYPE
Obsolete. Polarity of data transmitted on this FT1 interface. Inverted data is used for certain line coding configurations to ensure sufficient one's density for timing recovery by the remote end.
1.3.6.1.4.1.4874.2.2.6.1.2.1.6INTEGER {normal(0), inverted(1)}read-createobsolete
juniFt1IfLoopbackConfig
OBJECT-TYPE
Selects loopback configuration. loop(1) causes received data to be looped back out the transmitter.
1.3.6.1.4.1.4874.2.2.6.1.2.1.7INTEGER {noLoop(0), loop(1)}read-createcurrent
juniFt1Conformance
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.6.4
juniFt1Compliances
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.6.4.1
juniFt1Groups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.6.4.2

Conformance

NameOIDStatus
juniFt1Compliance
MODULE-COMPLIANCE
Obsolete compliance statement for entities that implement the Juniper FT1 MIB. This statement became obsolete when the interface data polarity object was obsoleted.
1.3.6.1.4.1.4874.2.2.6.4.1.1obsolete
juniFt1Compliance2
MODULE-COMPLIANCE
The compliance statement for entities that implement the Juniper FT1 MIB.
1.3.6.1.4.1.4874.2.2.6.4.1.2current
juniFt1Group
OBJECT-GROUP
Obsolete collection of objects providing management of FT1 interfaces in a Juniper product. This group became obsolete when the interface data polarity object was obsoleted.
1.3.6.1.4.1.4874.2.2.6.4.2.1obsolete
juniFt1Group2
OBJECT-GROUP
A collection of objects providing management of FT1 interfaces in a Juniper product.
1.3.6.1.4.1.4874.2.2.6.4.2.2current