MIBs Depot

Juniper-BGP-MIB

Registered at
1.3.6.1.4.1.4874.2.2.29
Last updated
2007-05-11 05:17
Organization
Juniper Networks, Inc.
Revisions
2007-05-11 05:17, 2006-05-15 19:24, 2005-12-29 21:37, 2005-10-05 18:46, 2005-10-03 18:46, 2004-07-06 18:46, 2004-05-26 19:24, 2004-05-26 19:24, 2004-05-26 19:24, 2004-05-26 19:24, 2004-05-26 19:24, 2002-08-31 18:22, 2002-03-01 16:54, 2002-01-23 13:16, 2001-12-04 15:23, 2001-11-30 22:20, 2001-06-18 18:59, 2000-01-12 00:00
Namespace
juniper
Source file
Juniper-BGP-MIB
Digest
sha256:5ffb0366c2491a51783c6a21f25b5d3c330c45d0c77de93e732d1b0fbe2e5169

Description

The BGP Protocol MIB for the Juniper Networks enterprise.

Contact

Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net

Imports

FromSymbols
Juniper-MIBsjuniMibs
Juniper-TCJuniVrfName
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

Juniper-BGP-MIB
Juniper-MIBs
Juniper-TC
Juniper-UNI-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JuniBgpAdvertiseMapName
TEXTUAL-CONVENTION
Advertise route-map name. Represents textual information taken from the NVT ASCII character set.
current
JuniBgpAfi
TEXTUAL-CONVENTION
Address family identifier (AFI).
current
JuniBgpConditionalAdvStatus
TEXTUAL-CONVENTION
BGP Conditional Advertisement Status
current
JuniBgpFourOctetAsNumber
TEXTUAL-CONVENTION
Four-octet AS-number.
current
JuniBgpResetConnectionType
TEXTUAL-CONVENTION
Writing a value to an object of this type will cause the corresponding reset action to take place: resetTypeNoop - no action (this value is always returned on a read) resetTypeHard - causes a BGP session to be dropped and then re-established resetTypeSoftIn - causes inbound policy to be re-applied to received routes resetTypeSoftOut - causes outbound policy to be re-applied to sent routes resetTypeSoftInOut - does both resetTypeSoftIn and resetTypeSoftOut resetTypeRouteFlapHistory - causes route-flap dampening history to be discarded resetTypeSoftInWithPrefixOrfPush - causes BGP to push out prefix-list ORF and perform inbound soft reconfiguration resetTypeWaitEndOfRib - causes BGP to stop waiting for the End-of-RIB flag from the peer(s) resetTypeRecreateAllIpDynInterfaces - causes all dynamically created IP interfaces to be recreated resetTypeDynamicPeers - causes dynamically create peers to be removed
current
JuniBgpSafi
TEXTUAL-CONVENTION
Subsequent address family identifier (SAFI).
current
JuniBgpStorageInteger
TEXTUAL-CONVENTION
Specifies an unsigned integer. If an object with this type is set while BGP is created, the value will not be used until a reboot occurs.
current

Objects

NameOIDSyntaxAccessStatus
juniBgpObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.29.1
juniBgpGeneralGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.29.1.1
juniBgpLocalAsNumber
OBJECT-TYPE
Deprecated. The local autonomous system number. This object has been replaced by juniBgpFourOctetLocalAsNumber. It is still possible to get and set this object, but if the actual local AS number is greater than 65535, getting this object returns 23456 (AS-TRANS).
1.3.6.1.4.1.4874.2.2.29.1.1.1Integer32 (0..65535)read-writedeprecated
juniBgpEnabled
OBJECT-TYPE
Set this object to true(1) in order to have BGP router enabled.
1.3.6.1.4.1.4874.2.2.29.1.1.2TruthValueread-writecurrent
juniBgpIdentifier
OBJECT-TYPE
The BGP identifier of the local system. The identifier is the system router ID by default.
1.3.6.1.4.1.4874.2.2.29.1.1.3IpAddressread-writecurrent
juniBgpAlwaysCompareMed
OBJECT-TYPE
Set this object to true(1) in order to compare metrics for paths from neighors of different ASs.
1.3.6.1.4.1.4874.2.2.29.1.1.4TruthValueread-writecurrent
juniBgpDefaultLocalPreference
OBJECT-TYPE
The default local preference.
1.3.6.1.4.1.4874.2.2.29.1.1.5Unsigned32read-writecurrent
juniBgpEqualCostLimit
OBJECT-TYPE
Obsolete maximum equal cost paths to store in the routing table. This object has been replaced by the juniBgpVrfMaximumPathsEbgp object.
1.3.6.1.4.1.4874.2.2.29.1.1.6Integer32 (0..65535)read-writeobsolete
juniBgpClientToClientReflection
OBJECT-TYPE
Set this object to true(1) in order to have client-to-client route reflection enabled.
1.3.6.1.4.1.4874.2.2.29.1.1.7TruthValueread-writecurrent
juniBgpClusterId
OBJECT-TYPE
The cluster ID. When this object is zero, the router ID will be used.
1.3.6.1.4.1.4874.2.2.29.1.1.8Unsigned32read-writecurrent
juniBgpConfederationId
OBJECT-TYPE
The confederation ID. When this object is zero, the router is not in a confederation.
1.3.6.1.4.1.4874.2.2.29.1.1.9Unsigned32read-writecurrent
juniBgpMissingAsWorst
OBJECT-TYPE
If this object is set to true(1) routes without a MED attribute are considered worse than routes with a MED attribute. If this object is set to false(0) routes without a MED attribute are considered better than routes with a MED attribute.
1.3.6.1.4.1.4874.2.2.29.1.1.10TruthValueread-writecurrent
juniBgpResetAllConnectionType
OBJECT-TYPE
Writing a value to this object causes all sessions to all peers to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop.
1.3.6.1.4.1.4874.2.2.29.1.1.11JuniBgpResetConnectionTyperead-writecurrent
juniBgpAdvertiseInactive
OBJECT-TYPE
Set this object to true(1) in order to propagate received BGP routes which are not the best route in the IP forwarding table.
1.3.6.1.4.1.4874.2.2.29.1.1.12TruthValueread-writecurrent
juniBgpEnforceFirstAs
OBJECT-TYPE
Set this object to true(1) in order to check whether the first AS number in the AS-path in routes from EBGP peers is consistent with the AS number of the peer.
1.3.6.1.4.1.4874.2.2.29.1.1.13TruthValueread-writecurrent
juniBgpConfedCompareMed
OBJECT-TYPE
Set this object to true(1) in order to compare metrics for paths from neighors of different sub-ASs in the same confederation.
1.3.6.1.4.1.4874.2.2.29.1.1.14TruthValueread-writecurrent
juniBgpGlobalRetryInterval
OBJECT-TYPE
The default number of seconds before BGP retries to establish an outgoing BGP session.
1.3.6.1.4.1.4874.2.2.29.1.1.15Integer32 (0..65535)read-writecurrent
juniBgpGlobalConfigKeepAliveInterval
OBJECT-TYPE
Default time interval in seconds for the KeepAlive timer for all peers. Zero means don't send KeepAlive messages.
1.3.6.1.4.1.4874.2.2.29.1.1.16Integer32 (0..65535)read-writecurrent
juniBgpGlobalConfigHoldTime
OBJECT-TYPE
Default time interval in seconds for the Hold timer for all peers. Zero means don't expect KeepAlive message to be received.
1.3.6.1.4.1.4874.2.2.29.1.1.17Integer32 (0 | 3..65535)read-writecurrent
juniBgpGlobalAsOriginationInterval
OBJECT-TYPE
Default time interval in seconds for the MinASOriginationInterval timer for all peers.
1.3.6.1.4.1.4874.2.2.29.1.1.18Integer32 (1..65535)read-writecurrent
juniBgpExternalAdvertisementInterval
OBJECT-TYPE
Default time interval in seconds for the MinRouteAdvertisementInterval timer for all external peers.
1.3.6.1.4.1.4874.2.2.29.1.1.19Integer32 (0..65535)read-writecurrent
juniBgpGlobalRibOutEnabled
OBJECT-TYPE
Set this object to true(1) in order to enable RIB-out by default for all peers, or to false(2) to disable RIB-out by default for all peers.
1.3.6.1.4.1.4874.2.2.29.1.1.20TruthValueread-writecurrent
juniBgpOverloadShutdown
OBJECT-TYPE
Set this object to true(1) for BGP to shut itself down when it runs out of memory. Set this object to false(2) for BGP to continue running (with incomplete information) when it runs out of memory.
1.3.6.1.4.1.4874.2.2.29.1.1.21TruthValueread-writecurrent
juniBgpLogNeighborChanges
OBJECT-TYPE
Set this object to true(1) for BGP log a message whenever a peer enters or leaves the established state.
1.3.6.1.4.1.4874.2.2.29.1.1.22TruthValueread-writecurrent
juniBgpFastExternalFallover
OBJECT-TYPE
Set this object to true(1) for BGP to immediately bring down any directly adjacent EBGP session on a link down.
1.3.6.1.4.1.4874.2.2.29.1.1.23TruthValueread-writecurrent
juniBgpInternalAdvertisementInterval
OBJECT-TYPE
Default time interval in seconds for the MinRouteAdvertisementInterval timer for all internal peers.
1.3.6.1.4.1.4874.2.2.29.1.1.24Integer32 (0..65535)read-writecurrent
juniBgpMaxAsLimit
OBJECT-TYPE
Maximum length of received AS-path. Received routes with an AS-path longer than this are not placed in the IP forwarding table and are not propagated to other peers. Zero means no maximum length.
1.3.6.1.4.1.4874.2.2.29.1.1.25Integer32 (0..65535)read-writecurrent
juniBgpOperationalState
OBJECT-TYPE
The BGP instance operational state.
1.3.6.1.4.1.4874.2.2.29.1.1.26INTEGER {none(0), up(1), down(2), overload(3)}read-onlycurrent
juniBgpPreviousOperationalState
OBJECT-TYPE
The BGP instance previous operational state.
1.3.6.1.4.1.4874.2.2.29.1.1.27INTEGER {none(0), up(1), down(2), overload(3)}read-onlycurrent
juniBgpAutomaticRouteTargetFilter
OBJECT-TYPE
Set this object to true(1) for BGP to enable automatic route-target filtering.
1.3.6.1.4.1.4874.2.2.29.1.1.28TruthValueread-writecurrent
juniBgpDefaultIPv4Unicast
OBJECT-TYPE
Set this object to true(1) for BGP to automatically activate peers in the IPv4 unicast address family.
1.3.6.1.4.1.4874.2.2.29.1.1.29TruthValueread-writecurrent
juniBgpRedistributeInternal
OBJECT-TYPE
Set this object to true(1) for BGP to automatically redistribute iBGP routes to IGP protocols.
1.3.6.1.4.1.4874.2.2.29.1.1.30TruthValueread-writecurrent
juniBgpFourOctetLocalAsNumber
OBJECT-TYPE
The four-octet local autonomous system number. This attribute replaces the old two-octet local autonomous system number.
1.3.6.1.4.1.4874.2.2.29.1.1.31JuniBgpFourOctetAsNumberread-writecurrent
juniBgpConfederationPeersFilterList
OBJECT-TYPE
The confederation peers filter-list contains the name of an as-path access-list. Every neighbor whose remote-AS number matches this as-path access-list is considered a confederation peer. An empty string means that no confederation peers filter-list is configured.
1.3.6.1.4.1.4874.2.2.29.1.1.32DisplayString (SIZE(0..32))read-writecurrent
juniBgpUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.1.33Bits {juniBgpEnabled(0), juniBgpIdentifier(1), juniBgpAlwaysCompareMed(2), juniBgpDefaultLocalPreference(3), juniBgpEqualCostLimit(4), juniBgpClientToClientReflection(5), juniBgpClusterId(6), juniBgpConfederationId(7), juniBgpMissingAsWorst(8), juniBgpAdvertiseInactive(9), juniBgpEnforceFirstAs(10), juniBgpConfedCompareMed(11), juniBgpGlobalRetryInterval(12), juniBgpGlobalConfigKeepAliveInterval(13), juniBgpGlobalConfigHoldTime(14), juniBgpGlobalAsOriginationInterval(15), juniBgpExternalAdvertisementInterval(16), juniBgpGlobalRibOutEnabled(17), juniBgpOverloadShutdown(18), juniBgpLogNeighborChanges(19), juniBgpFastExternalFallover(20), juniBgpInternalAdvertisementInterval(21), juniBgpMaxAsLimit(22), juniBgpAutomaticRouteTargetFilter(23), juniBgpDefaultIPv4Unicast(24), juniBgpRedistributeInternal(25), juniBgpFourOctetLocalAsNumber(26), juniBgpConfederationPeersFilterList(27), juniBgpAdvertiseBestExternalToInternal(28), juniBgpGracefulRestartEnabled(29), juniBgpGracefulRestartRestartTime(30), juniBgpGracefulRestartStalePathsTime(31), juniBgpGracefulRestartPathSelectionDeferTimeLimit(32)}read-writecurrent
juniBgpAdvertiseBestExternalToInternal
OBJECT-TYPE
If this object is set to true(1) then BGP advertises the best route received from external (and confederation) peers to internal peers. If this object is set to false(2) then BGP advertises the best route received from all peers to internal peers except if the best route was received from an internal peer in which case BGP doesn't advertise any route to internal peers.
1.3.6.1.4.1.4874.2.2.29.1.1.34TruthValueread-writecurrent
juniBgpGracefulRestartEnabled
OBJECT-TYPE
Set this object to true(1) to enable BGP graceful restart.
1.3.6.1.4.1.4874.2.2.29.1.1.35TruthValueread-writecurrent
juniBgpGracefulRestartRestartTime
OBJECT-TYPE
The restart-time advertised in graceful-restart capabilities sent to all peers. This is the estimated time (in seconds) it will take for the BGP session to be re-established after a restart. This can be used to speed up routing convergence by the peer in case that this BGP speaker does not come back after a restart. This value is used by all peers unless overridden by juniBgpPeerGroupGracefulRestartRestartTime or juniBgpPeerGracefulRestartRestartTime.
1.3.6.1.4.1.4874.2.2.29.1.1.36Integer32 (1..3600)read-writecurrent
juniBgpGracefulRestartStalePathsTime
OBJECT-TYPE
The maximum amount of time in seconds we keep stale routes after a session goes down. This value is used for all peers unless it has been overridden by juniBgpPeerGroupGracefulRestartStalePathsTime or juniBgpPeerGracefulRestartStalePathsTime.
1.3.6.1.4.1.4874.2.2.29.1.1.37Integer32 (1..3600)read-writecurrent
juniBgpGracefulRestartPathSelectionDeferTimeLimit
OBJECT-TYPE
The maximum amount of time in seconds route selection is deferred after a restart.
1.3.6.1.4.1.4874.2.2.29.1.1.38Integer32 (1..3600)read-writecurrent
juniBgpPlatformSupportsNonStopForwarding
OBJECT-TYPE
Does this platform support non-stop forwarding?
1.3.6.1.4.1.4874.2.2.29.1.1.39TruthValueread-onlycurrent
juniBgpDeviceCanPreserveForwardingState
OBJECT-TYPE
Is this router at this moment able to do a graceful restart (i.e. is it able to switch over from the primary controller to the standby controller without losing forwarding state on the line cards). The router may not be able to do a graceful restart because the platform does not support non-stop forwarding, because there is no secondary controller present, because the secondary controller is not in standby state, etc.
1.3.6.1.4.1.4874.2.2.29.1.1.40TruthValueread-onlycurrent
juniBgpLastRestartWasGraceful
OBJECT-TYPE
Was the most recent restart graceful? (i.e. was forwarding state preserved on the line cards during the most recent switch-over from the primary controller to the standby controller?)
1.3.6.1.4.1.4874.2.2.29.1.1.41TruthValueread-onlycurrent
juniBgpRouteTableStatisticsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.29.1.2
juniBgpBaselineTime
OBJECT-TYPE
The sysUpTime at which the counters were most recently baselined.
1.3.6.1.4.1.4874.2.2.29.1.2.1Unsigned32read-onlycurrent
juniBgpDestinationCount
OBJECT-TYPE
Number of distinct destinations in the local RIB.
1.3.6.1.4.1.4874.2.2.29.1.2.2Gauge32read-onlycurrent
juniBgpDestinationMemoryUsed
OBJECT-TYPE
Memory used by distinct destinations in the local RIB.
1.3.6.1.4.1.4874.2.2.29.1.2.3Gauge32read-onlycurrent
juniBgpRouteCount
OBJECT-TYPE
Number of routes in the local RIB.
1.3.6.1.4.1.4874.2.2.29.1.2.4Gauge32read-onlycurrent
juniBgpRouteMemoryUsed
OBJECT-TYPE
Memory used by routes in the local RIB.
1.3.6.1.4.1.4874.2.2.29.1.2.5Gauge32read-onlycurrent
juniBgpSelectedRouteCount
OBJECT-TYPE
Number of routes selected for route table installation.
1.3.6.1.4.1.4874.2.2.29.1.2.6Gauge32read-onlycurrent
juniBgpPathAttributeCount
OBJECT-TYPE
Number of entries in the path attribute database.
1.3.6.1.4.1.4874.2.2.29.1.2.8Gauge32read-onlycurrent
juniBgpPathAttributeMemoryUsed
OBJECT-TYPE
Memory used by entries in the path attribute database.
1.3.6.1.4.1.4874.2.2.29.1.2.9Gauge32read-onlycurrent
juniBgpRouteFlapHistoryCount
OBJECT-TYPE
Number of routes with active route flap histories.
1.3.6.1.4.1.4874.2.2.29.1.2.10Gauge32read-onlycurrent
juniBgpRouteFlapHistoryMemoryUsed
OBJECT-TYPE
Memory used by routes with active route flap histories.
1.3.6.1.4.1.4874.2.2.29.1.2.11Gauge32read-onlycurrent
juniBgpSuppressedRouteCount
OBJECT-TYPE
Number of routes suppressed due to route flap.
1.3.6.1.4.1.4874.2.2.29.1.2.12Gauge32read-onlycurrent
juniBgpConfederationPeerTable
OBJECT-TYPE
The Juniper BGP Confederation Peer Table describes the BGP-specific characteristics of confederation peers.
1.3.6.1.4.1.4874.2.2.29.1.3not-accessibledeprecated
juniBgpConfederationPeerEntry
OBJECT-TYPE
The BGP Confederation Peer Entry describes BGP-specific characteristics of one confederation peer.
1.3.6.1.4.1.4874.2.2.29.1.3.1not-accessibledeprecated
juniBgpConfederationPeerAsNumber
OBJECT-TYPE
The AsNumber of this confederation peer.
1.3.6.1.4.1.4874.2.2.29.1.3.1.1Integer32 (1..65535)not-accessibledeprecated
juniBgpConfederationPeerRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.3.1.2RowStatusread-createdeprecated
juniBgpPeerTable
OBJECT-TYPE
The Juniper BGP Peer Table describes the BGP-specific characteristics of peers.
1.3.6.1.4.1.4874.2.2.29.1.4not-accessiblecurrent
juniBgpPeerEntry
OBJECT-TYPE
The BGP Peer Entry describes BGP-specific characteristics of one peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1not-accessiblecurrent
juniBgpPeerVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.4.1.1JuniVrfNamenot-accessiblecurrent
juniBgpPeerRemoteAddress
OBJECT-TYPE
The remote IP address of this entry's BGP peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.2IpAddressnot-accessiblecurrent
juniBgpPeerAdminStatus
OBJECT-TYPE
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
1.3.6.1.4.1.4874.2.2.29.1.4.1.3INTEGER {stop(1), start(2)}read-createcurrent
juniBgpPeerState
OBJECT-TYPE
The BGP peer connection state.
1.3.6.1.4.1.4874.2.2.29.1.4.1.4INTEGER {stop(0), idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6), removing(7)}read-onlycurrent
juniBgpPeerNegotiatedVersion
OBJECT-TYPE
The negotiated version of BGP running between the two peers.
1.3.6.1.4.1.4874.2.2.29.1.4.1.5Integer32read-onlycurrent
juniBgpPeerLocalAddress
OBJECT-TYPE
The local IP address of this entry's BGP connection.
1.3.6.1.4.1.4874.2.2.29.1.4.1.6IpAddressread-onlycurrent
juniBgpPeerLocalAddressMask
OBJECT-TYPE
The local IP address mask of this entry's BGP connection.
1.3.6.1.4.1.4874.2.2.29.1.4.1.7IpAddressread-onlycurrent
juniBgpPeerLocalPort
OBJECT-TYPE
The local port for the TCP connection between the BGP peers.
1.3.6.1.4.1.4874.2.2.29.1.4.1.8Integer32 (0..65535)read-onlycurrent
juniBgpPeerRemoteAsNumber
OBJECT-TYPE
Deprecated. The peer's autonomous system number. This object has been replaced by juniBgpPeerFourOctetRemoteAsNumber. It is still possible to get and set this object, but if the actual remote AS number is greater than 65535, getting this object returns 23456 (AS-TRANS).
1.3.6.1.4.1.4874.2.2.29.1.4.1.9Integer32 (0..65535)read-createdeprecated
juniBgpPeerRemotePort
OBJECT-TYPE
The remote port for the TCP connection between the BGP peers. Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort, bgpPeerRemoteAddr and bgpPeerRemotePort provide the appropriate reference to the standard MIB TCP connection table.
1.3.6.1.4.1.4874.2.2.29.1.4.1.10Integer32 (0..65535)read-onlycurrent
juniBgpPeerInUpdates
OBJECT-TYPE
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
1.3.6.1.4.1.4874.2.2.29.1.4.1.11Counter32read-onlycurrent
juniBgpPeerOutUpdates
OBJECT-TYPE
The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
1.3.6.1.4.1.4874.2.2.29.1.4.1.12Counter32read-onlycurrent
juniBgpPeerInTotalMessages
OBJECT-TYPE
The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
1.3.6.1.4.1.4874.2.2.29.1.4.1.13Counter32read-onlycurrent
juniBgpPeerOutTotalMessages
OBJECT-TYPE
The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
1.3.6.1.4.1.4874.2.2.29.1.4.1.14Counter32read-onlycurrent
juniBgpPeerLastErrorCode
OBJECT-TYPE
The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
1.3.6.1.4.1.4874.2.2.29.1.4.1.15OCTET STRING (SIZE(2))read-onlycurrent
juniBgpPeerLastResetReason
OBJECT-TYPE
The string representing the last error code seen by this peer on this connection. If no error has occurred, this string is null.
1.3.6.1.4.1.4874.2.2.29.1.4.1.16DisplayStringread-onlycurrent
juniBgpPeerFsmEstablishedTransitions
OBJECT-TYPE
The total number of times the BGP FSM transitioned into the established state.
1.3.6.1.4.1.4874.2.2.29.1.4.1.17Counter32read-onlycurrent
juniBgpPeerFsmEstablishedTime
OBJECT-TYPE
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
1.3.6.1.4.1.4874.2.2.29.1.4.1.18Gauge32read-onlycurrent
juniBgpPeerRetryInterval
OBJECT-TYPE
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
1.3.6.1.4.1.4874.2.2.29.1.4.1.19Integer32 (1..65535)read-createcurrent
juniBgpPeerHoldTime
OBJECT-TYPE
Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in bgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the Hold Timer has not been established with the peer, or, the value of bgpPeerHoldTimeConfigured is zero (0).
1.3.6.1.4.1.4874.2.2.29.1.4.1.20Integer32 (0 | 3..65535)read-onlycurrent
juniBgpPeerKeepAliveInterval
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with bgpPeerHoldTime, it has the same proportion as what bgpPeerKeepAliveConfigured has when compared with bgpPeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of bgpPeerKeepAliveConfigured is zero (0).
1.3.6.1.4.1.4874.2.2.29.1.4.1.21Integer32 (0..21845)read-onlycurrent
juniBgpPeerConfigHoldTime
OBJECT-TYPE
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
1.3.6.1.4.1.4874.2.2.29.1.4.1.22Integer32 (0 | 3..65535)read-createcurrent
juniBgpPeerConfigKeepAliveInterval
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of bgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.4874.2.2.29.1.4.1.23Integer32 (0..21845)read-createcurrent
juniBgpPeerAsOriginationInterval
OBJECT-TYPE
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 10 seconds.
1.3.6.1.4.1.4874.2.2.29.1.4.1.24Integer32 (1..65535)read-createcurrent
juniBgpPeerAdvertisementInterval
OBJECT-TYPE
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.4874.2.2.29.1.4.1.25Integer32 (1..65535)read-createcurrent
juniBgpPeerInUpdateElapsedTime
OBJECT-TYPE
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is set to zero (0).
1.3.6.1.4.1.4874.2.2.29.1.4.1.26Gauge32read-onlycurrent
juniBgpPeerDescription
OBJECT-TYPE
Peer textual description.
1.3.6.1.4.1.4874.2.2.29.1.4.1.27DisplayString (SIZE(0..80))read-createcurrent
juniBgpPeerRemoteIdentifier
OBJECT-TYPE
Peer's remote router ID.
1.3.6.1.4.1.4874.2.2.29.1.4.1.28IpAddressread-onlycurrent
juniBgpPeerWeight
OBJECT-TYPE
The weight assigned to routes learned from peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.29Unsigned32read-createcurrent
juniBgpPeerEbgpMultihop
OBJECT-TYPE
The EBGP multihop is enabled.
1.3.6.1.4.1.4874.2.2.29.1.4.1.30TruthValueread-createcurrent
juniBgpPeerEbgpMultihopTtl
OBJECT-TYPE
Maximum number of hops to the external peer (only relevant if EBGP multihop turned on).
1.3.6.1.4.1.4874.2.2.29.1.4.1.31Integer32 (1..255)read-createcurrent
juniBgpPeerUpdateSource
OBJECT-TYPE
The source IP address for peer connections.
1.3.6.1.4.1.4874.2.2.29.1.4.1.32IpAddressread-createcurrent
juniBgpPeerMd5Password
OBJECT-TYPE
The password for MD5 authentication. Reading this object always results in an OCTET STRING of length zero.
1.3.6.1.4.1.4874.2.2.29.1.4.1.33OCTET STRING (SIZE(0..32))read-createcurrent
juniBgpPeerMaxUpdateSize
OBJECT-TYPE
The maximum size in bytes of transmitted UPDATE messages.
1.3.6.1.4.1.4874.2.2.29.1.4.1.34Unsigned32read-createcurrent
juniBgpPeerType
OBJECT-TYPE
The type of peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.35INTEGER {peerTypeInternal(1), peerTypeExternal(2), peerTypeConfederation(3), peerTypeUnknown(4)}read-onlycurrent
juniBgpPeerReceivedCapabilitiesOption
OBJECT-TYPE
The peer sent the capabilities optional parameter in its open message.
1.3.6.1.4.1.4874.2.2.29.1.4.1.36TruthValueread-onlycurrent
juniBgpPeerReceivedCapabilityMultiProtocol
OBJECT-TYPE
The peer has advertised the multi-protocol capability to us.
1.3.6.1.4.1.4874.2.2.29.1.4.1.37TruthValueread-onlycurrent
juniBgpPeerReceivedCapabilityRouteRefresh
OBJECT-TYPE
The peer has advertised the route-refresh capability to us.
1.3.6.1.4.1.4874.2.2.29.1.4.1.38TruthValueread-onlycurrent
juniBgpPeerReceivedCapabilityRouteRefreshCisco
OBJECT-TYPE
The peer has advertised the route-refresh-cisco capability to us.
1.3.6.1.4.1.4874.2.2.29.1.4.1.39TruthValueread-onlycurrent
juniBgpPeerResetConnectionType
OBJECT-TYPE
Writing a value to this object causes the session to the peer to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop.
1.3.6.1.4.1.4874.2.2.29.1.4.1.40JuniBgpResetConnectionTyperead-createcurrent
juniBgpPeerRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.4.1.41RowStatusread-createcurrent
juniBgpPeerLocalAsNumber
OBJECT-TYPE
Deprecated. The local autonomous system number to be used for this peer. Value zero (0) means that the global local automous system number (as specified in the object juniBgpPeerLocalAsNumber) is used. This object has been replaced by juniBgpPeerFourOctetLocalAsNumber. It is still possible to get and set this object, but if the actual local AS number is greater than 65535, getting this object returns AS-TRANS (23456).
1.3.6.1.4.1.4874.2.2.29.1.4.1.42Integer32 (0..65535)read-createdeprecated
juniBgpPeerFourOctetRemoteAsNumber
OBJECT-TYPE
The peer's four-octet autonomous system number.
1.3.6.1.4.1.4874.2.2.29.1.4.1.43JuniBgpFourOctetAsNumberread-createcurrent
juniBgpPeerFourOctetLocalAsNumber
OBJECT-TYPE
The four-octet local autonomous system number to be used for this peer. Value zero (0) means that the global local automous system number (as specified in the object juniBgpPeerFourOctetLocalAsNumber) is used.
1.3.6.1.4.1.4874.2.2.29.1.4.1.44JuniBgpFourOctetAsNumberread-createcurrent
juniBgpPeerReceivedCapabilityFourOctetAsNumbers
OBJECT-TYPE
The peer has advertised the four-octet-as-numbers capability to us.
1.3.6.1.4.1.4874.2.2.29.1.4.1.45TruthValueread-onlycurrent
juniBgpPeerReceivedCapabilityDynamicCapabilityNeg
OBJECT-TYPE
The peer has advertised the dynamic-capability-negotiation capability to us.
1.3.6.1.4.1.4874.2.2.29.1.4.1.46TruthValueread-onlycurrent
juniBgpPeerShouldAdvertiseCapabilitiesOption
OBJECT-TYPE
Set this object to true if the capabilities option should be included in OPEN messages sent to this peer. Even if this object is set to true, BGP may decide not to include the capabilities option in OPEN messages sent to this peer (for example when it is detected that the peer does not support capability negotiation). The juniBgpPeerSentCapabilitiesOption can be used to determine whether or not the OPEN message sent to the peer actually contained the capabilities option.
1.3.6.1.4.1.4874.2.2.29.1.4.1.47TruthValueread-createcurrent
juniBgpPeerShouldAdvertiseCapabilityRouteRefresh
OBJECT-TYPE
Set this object to true if the route-refresh capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the route-refresh capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the route-refresh capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityRouteRefresh can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.48TruthValueread-createcurrent
juniBgpPeerShouldAdvertiseCapabilityRouteRefreshCisco
OBJECT-TYPE
Set this object to true if the route-refresh-cisco capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the route-refresh-cisco capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the route-refresh-cisco capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityRouteRefreshCisco can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.49TruthValueread-createcurrent
juniBgpPeerShouldAdvertiseCapabilityFourOctetAsNumbers
OBJECT-TYPE
Set this object to true if the four-octet-as-numbers capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the four-octet-as-numbers capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the four-octet-as-numbers capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityFourOctetAsNumbers can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.50TruthValueread-createcurrent
juniBgpPeerShouldAdvertiseCapabilityDynamicCapabilityNeg
OBJECT-TYPE
Set this object to true if the dynamic-capability-negotiation capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the dynamic-capability-negotiation capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the dynamic-capability-negotiation capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityDynamicCapabilityNeg can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.51TruthValueread-createcurrent
juniBgpPeerSentCapabilitiesOption
OBJECT-TYPE
We sent the capabilities optional parameter in the OPEN message to this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.52TruthValueread-onlycurrent
juniBgpPeerSentCapabilityMultiProtocol
OBJECT-TYPE
We advertised the multi-protocol capability to this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.53TruthValueread-onlycurrent
juniBgpPeerSentCapabilityRouteRefresh
OBJECT-TYPE
We advertised the route-refresh capability to this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.54TruthValueread-onlycurrent
juniBgpPeerSentCapabilityRouteRefreshCisco
OBJECT-TYPE
We advertised the route-refresh-cisco capability to this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.55TruthValueread-onlycurrent
juniBgpPeerSentCapabilityFourOctetAsNumbers
OBJECT-TYPE
We advertised the four-octet-as-numbers capability to this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.56TruthValueread-onlycurrent
juniBgpPeerSentCapabilityDynamicCapabilityNeg
OBJECT-TYPE
We advertised the dynamic-capability-negotiation capability to this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.57TruthValueread-onlycurrent
juniBgpPeerReceivedUnsupportedOptionalParameterNotification
OBJECT-TYPE
We received an unsupported optional parameter notification from this peer. This indicates that the peer does not support capability negotiation. When this object is set to true, we do not include the capabilities optional parameter in OPEN messages sent to this peer. A hard clear of the session is needed to retry sending the capabilities optional parameter.
1.3.6.1.4.1.4874.2.2.29.1.4.1.58TruthValueread-onlycurrent
juniBgpPeerReceivedUnsupportedCapabilityNotification
OBJECT-TYPE
We received an unsupported capability notification from this peer. This often happens because the peer did not recognize a capability which we advertised to the peer and that peer incorrectly send back an unsupported capability notification (the peer should ignore the unsupported capability instead). When this object is set to true, we do not advertise capabilities that the peer does not support.
1.3.6.1.4.1.4874.2.2.29.1.4.1.59TruthValueread-onlycurrent
juniBgpPeerUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.4.1.60Bits {juniBgpPeerAdminStatus(0), juniBgpPeerRetryInterval(1), juniBgpPeerConfigHoldTime(2), juniBgpPeerConfigKeepAliveInterval(3), juniBgpPeerAsOriginationInterval(4), juniBgpPeerAdvertisementInterval(5), juniBgpPeerDescription(6), juniBgpPeerWeight(7), juniBgpPeerEbgpMultihop(8), juniBgpPeerEbgpMultihopTtl(9), juniBgpPeerUpdateSource(10), juniBgpPeerMd5Password(11), juniBgpPeerMaxUpdateSize(12), juniBgpPeerFourOctetRemoteAsNumber(13), juniBgpPeerFourOctetLocalAsNumber(14), juniBgpPeerShouldAdvertiseCapabilitiesOption(15), juniBgpPeerShouldAdvertiseCapabilityRouteRefresh(16), juniBgpPeerShouldAdvertiseCapabilityRouteRefreshCisco(17), juniBgpPeerShouldAdvertiseCapabilityFourOctetAsNumbers(18), juniBgpPeerShouldAdvertiseCapabilityDynamicCapabilityNeg(19), juniBgpPeerSiteOfOrigin(20), juniBgpPeerLenient(21), juniBgpPeerShouldAdvertiseCapabilityOldDynamicCapabilityNeg(22), juniBgpPeerPassive(23), juniBgpPeerShouldAdvertiseCapabilityGracefulRestart(24), juniBgpPeerGracefulRestartRestartTime(25), juniBgpPeerGracefulRestartStalePathsTime(26), juniBgpPeerBfdEnabled(27), juniBgpPeerBfdMinTransmitInterval(28), juniBgpPeerBfdMinReceiveInterval(29), juniBgpPeerBfdMultiplier(30), juniBgpPeerIbgpSinglehop(31)}read-createcurrent
juniBgpPeerSiteOfOrigin
OBJECT-TYPE
The site-of-origin. This site-of-origin is added to the extended communities for all routes received from the peer. When sending routes to this peer all routes with this extended community are filtered. The null extended community (all 8 bytes zero) means that no site-of-origin is configured for this peer. It is not allowed to set this object to any extended community other than a site-of-origin type of extended community or null.
1.3.6.1.4.1.4874.2.2.29.1.4.1.61OCTET STRING (SIZE(8))read-createcurrent
juniBgpPeerLenient
OBJECT-TYPE
Enable Lenient behavior for this peer so that it is more tolerant of finite state machine errors and malformed messages received from the remote peer and avoids terminating the peer session whenever possible.
1.3.6.1.4.1.4874.2.2.29.1.4.1.62TruthValueread-createcurrent
juniBgpPeerReceivedCapabilityOldDynamicCapabilityNeg
OBJECT-TYPE
The peer has advertised the old deprecated dynamic-capability- negotiation capability to us.
1.3.6.1.4.1.4874.2.2.29.1.4.1.63TruthValueread-onlycurrent
juniBgpPeerShouldAdvertiseCapabilityOldDynamicCapabilityNeg
OBJECT-TYPE
Set this object to true if the deprecated-dynamic-capability- negotiation capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the deprecated-dynamic-capability-negotiation capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the deprecated-dynamic-capability-negotiation capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityOldDynamicCapabilityNeg can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.64TruthValueread-createcurrent
juniBgpPeerSentCapabilityOldDynamicCapabilityNeg
OBJECT-TYPE
We advertised the old-dynamic-capability-negotiation capability to this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.65TruthValueread-onlycurrent
juniBgpPeerPassive
OBJECT-TYPE
Set this object to true(1) to make this a passive peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.66TruthValueread-createcurrent
juniBgpPeerDynamic
OBJECT-TYPE
This object return true(1) if this is a dynamically created peer or false(2) if this is a configured peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.67TruthValueread-onlycurrent
juniBgpPeerShouldAdvertiseCapabilityGracefulRestart
OBJECT-TYPE
Set this object to true if the graceful-restart capability should be advertised to all peers. Even if this object is set to true, BGP may decide not to advertise the graceful-restart capability to a peer (for example when graceful-restart is not enabled or when it is detected that the peer does not support capability negotiation). The juniBgpPeerSentCapabilityGracefulRestart can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.68TruthValueread-createcurrent
juniBgpPeerSentCapabilityGracefulRestart
OBJECT-TYPE
We advertised the graceful-restart capability to this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.69TruthValueread-onlycurrent
juniBgpPeerReceivedCapabilityGracefulRestart
OBJECT-TYPE
The peer has advertised the graceful-restart capability to us.
1.3.6.1.4.1.4874.2.2.29.1.4.1.70TruthValueread-onlycurrent
juniBgpPeerGracefulRestartRestartTime
OBJECT-TYPE
The restart-time advertised in the graceful-restart capability sent to this peer. This is the estimated time (in seconds) it will take for the BGP session to be re-established after a restart. This can be used to speed up routing convergence by the peer in case that this BGP speaker does not come back after a restart. This value (if configured) overrides the global value configured in juniBgpGracefulRestartRestartTime and the value for the peer-group configured in juniBgpPeerGroupGracefulRestartRestartTime.
1.3.6.1.4.1.4874.2.2.29.1.4.1.71Integer32 (1..3600)read-createcurrent
juniBgpPeerGracefulRestartStalePathsTime
OBJECT-TYPE
The maximum amount of time in seconds we keep stale routes after the session to this peer goes down. This value (if configured) overrides the global value configured in juniBgpGracefulRestartStalePathsTime and the value for the peer-group configured in juniBgpPeerGroupGracefulRestartStalePathsTime.
1.3.6.1.4.1.4874.2.2.29.1.4.1.72Integer32 (1..3600)read-createcurrent
juniBgpPeerSentGracefulRestartRestartState
OBJECT-TYPE
Value true(1) indicates that the OPEN message most recently sent to this peer contained the graceful-restart capability with the Restart-State (R) bit in the Restart Flags field set to one (this indicates that BGP has experienced a restart).
1.3.6.1.4.1.4874.2.2.29.1.4.1.73TruthValueread-onlycurrent
juniBgpPeerReceivedGracefulRestartRestartState
OBJECT-TYPE
Value true(1) indicates that the OPEN message most recently received from this peer contained the graceful-restart capability with the Restart-State (R) bit in the Restart Flags field set to one (this indicates that the peer has experienced a restart).
1.3.6.1.4.1.4874.2.2.29.1.4.1.74TruthValueread-onlycurrent
juniBgpPeerSentGracefulRestartRestartTime
OBJECT-TYPE
The restart time in seconds field in the graceful-restart capability which we sent to the peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.75Integer32 (0..3600)read-onlycurrent
juniBgpPeerReceivedGracefulRestartRestartTime
OBJECT-TYPE
The restart time in seconds field in the graceful-restart capability which we received from the peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.76Integer32 (0..65535)read-onlycurrent
juniBgpPeerTimeUntilGracefulRestartRestartTimerExpires
OBJECT-TYPE
If the restart-timer is running this object contains the number of seconds before it will expire. If the restart-timer is not running this object contains zero. The restart-timer is used to limit the amount of time that we are willing to wait for the session to come back up after the peer restarts.
1.3.6.1.4.1.4874.2.2.29.1.4.1.77Integer32 (0..65535)read-onlycurrent
juniBgpPeerTimeUntilGracefulRestartStalePathsTimerExpires
OBJECT-TYPE
If the stale-paths-timer is running this object contains the number of seconds before it will expire. If the stale-paths-timer is not running this object contains zero. The stale-paths-timer is used to limit the amount of time that we are willing continue using stale routes from a peer after that peer restarts.
1.3.6.1.4.1.4874.2.2.29.1.4.1.78Integer32 (0..3600)read-onlycurrent
juniBgpPeerBfdEnabled
OBJECT-TYPE
Value true(1) the BFD is enabled for this peer.
1.3.6.1.4.1.4874.2.2.29.1.4.1.79TruthValueread-createcurrent
juniBgpPeerBfdMinTransmitInterval
OBJECT-TYPE
The minimum interval (in milliseconds) between BFD packets sent to the remote BFD speaker. In other words, it specifies the maximum rate at which we are willing to send BFD packets.
1.3.6.1.4.1.4874.2.2.29.1.4.1.80Integer32 (100..65535)read-createcurrent
juniBgpPeerBfdMinReceiveInterval
OBJECT-TYPE
The minimum interval (in milliseconds) between BFD packets received from the remote BFD speaker. In other words, it specifies the maximum rate at which we are willing to receive BFD packets.
1.3.6.1.4.1.4874.2.2.29.1.4.1.81Integer32 (100..65535)read-createcurrent
juniBgpPeerBfdMultiplier
OBJECT-TYPE
How many BFD packets can be missed before the BFD session is declared down.
1.3.6.1.4.1.4874.2.2.29.1.4.1.82Integer32 (1..255)read-createcurrent
juniBgpPeerBfdSessionUp
OBJECT-TYPE
Is the BFD session up.
1.3.6.1.4.1.4874.2.2.29.1.4.1.83TruthValueread-onlycurrent
juniBgpPeerBfdDetectionTime
OBJECT-TYPE
The BFD detection time (in milliseconds) negotiated with the remote BFD speaker. In other words, how quickly can a broken connection be detected.
1.3.6.1.4.1.4874.2.2.29.1.4.1.84Integer32read-onlycurrent
juniBgpPeerIbgpSinglehop
OBJECT-TYPE
The IBGP single-hop is enabled.
1.3.6.1.4.1.4874.2.2.29.1.4.1.85TruthValueread-createcurrent
juniBgpPeerProposedAfiSafiPeerTable
OBJECT-TYPE
The Juniper BGP PeerProposedAfiSafi Peer Table describes the BGP-specific AFI and SAFIs a peer proposed.
1.3.6.1.4.1.4874.2.2.29.1.5not-accessiblecurrent
juniBgpPeerProposedAfiSafiPeerEntry
OBJECT-TYPE
The BGP PeerProposedAfiSafi Peer Entry describes a BGP-specific AFI/SAFIs proposed by one peer.
1.3.6.1.4.1.4874.2.2.29.1.5.1not-accessiblecurrent
juniBgpPeerProposedAfiSafiPeerVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.5.1.1JuniVrfNamenot-accessiblecurrent
juniBgpPeerProposedAfiSafiPeerRemoteAddr
OBJECT-TYPE
The remote IP address of this entry's BGP peer.
1.3.6.1.4.1.4874.2.2.29.1.5.1.2IpAddressnot-accessiblecurrent
juniBgpPeerProposedAfiSafiPeerAfi
OBJECT-TYPE
The AFI proposed by this peer to us.
1.3.6.1.4.1.4874.2.2.29.1.5.1.3JuniBgpAfinot-accessiblecurrent
juniBgpPeerProposedAfiSafiPeerSafi
OBJECT-TYPE
The SAFI proposed by this peer to us.
1.3.6.1.4.1.4874.2.2.29.1.5.1.4JuniBgpSafinot-accessiblecurrent
juniBgpPeerProposedAfiSafiPeerRowStatus
OBJECT-TYPE
Should always be active according to the Row Status convention.
1.3.6.1.4.1.4874.2.2.29.1.5.1.5RowStatusread-onlycurrent
juniBgpLocalProposedAfiSafiPeerTable
OBJECT-TYPE
The Juniper BGP LocalProposedAfiSafi Peer Table describes the BGP-specific AFI and SAFIs proposed to the peer.
1.3.6.1.4.1.4874.2.2.29.1.6not-accessiblecurrent
juniBgpLocalProposedAfiSafiPeerEntry
OBJECT-TYPE
The BGP LocalProposedAfiSafi Peer Entry describes a BGP-specific AFI/SAFIs proposed to one peer.
1.3.6.1.4.1.4874.2.2.29.1.6.1not-accessiblecurrent
juniBgpLocalProposedAfiSafiPeerVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.6.1.1JuniVrfNamenot-accessiblecurrent
juniBgpLocalProposedAfiSafiPeerRemoteAddr
OBJECT-TYPE
The remote IP address of this entry's BGP peer.
1.3.6.1.4.1.4874.2.2.29.1.6.1.2IpAddressnot-accessiblecurrent
juniBgpLocalProposedAfiSafiPeerAfi
OBJECT-TYPE
The AFI we proposed to this peer.
1.3.6.1.4.1.4874.2.2.29.1.6.1.3JuniBgpAfinot-accessiblecurrent
juniBgpLocalProposedAfiSafiPeerSafi
OBJECT-TYPE
The SAFI we proposed to this peer.
1.3.6.1.4.1.4874.2.2.29.1.6.1.4JuniBgpSafinot-accessiblecurrent
juniBgpLocalProposedAfiSafiPeerRowStatus
OBJECT-TYPE
Should always be active according to the Row Status convention.
1.3.6.1.4.1.4874.2.2.29.1.6.1.5RowStatusread-onlycurrent
juniBgpExchangedAfiSafiPeerTable
OBJECT-TYPE
The Juniper BGP PeerExchangedAfiSafi Peer Table describes the BGP-specific AFI and SAFIs a peer exchanged.
1.3.6.1.4.1.4874.2.2.29.1.7not-accessiblecurrent
juniBgpExchangedAfiSafiPeerEntry
OBJECT-TYPE
The BGP ExchangedAfiSafi Peer Entry describes a BGP-specific AFI/SAFIs exchanged by one peer.
1.3.6.1.4.1.4874.2.2.29.1.7.1not-accessiblecurrent
juniBgpExchangedAfiSafiPeerVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.7.1.1JuniVrfNamenot-accessiblecurrent
juniBgpExchangedAfiSafiPeerRemoteAddr
OBJECT-TYPE
The remote IP address of this entry's BGP peer.
1.3.6.1.4.1.4874.2.2.29.1.7.1.2IpAddressnot-accessiblecurrent
juniBgpExchangedAfiSafiPeerAfi
OBJECT-TYPE
The AFI which we exchange with this peer.
1.3.6.1.4.1.4874.2.2.29.1.7.1.3JuniBgpAfinot-accessiblecurrent
juniBgpExchangedAfiSafiPeerSafi
OBJECT-TYPE
The SAFI which we exchange with this peer.
1.3.6.1.4.1.4874.2.2.29.1.7.1.4JuniBgpSafinot-accessiblecurrent
juniBgpExchangedAfiSafiPeerRowStatus
OBJECT-TYPE
Should always be active according to the Row Status convention.
1.3.6.1.4.1.4874.2.2.29.1.7.1.5RowStatusread-onlycurrent
juniBgpPeerAddressFamilyTable
OBJECT-TYPE
The Juniper BGP Peer Address Family Table describes the BGP-specific attributes of an Address Family for a peer.
1.3.6.1.4.1.4874.2.2.29.1.8not-accessiblecurrent
juniBgpPeerAddressFamilyEntry
OBJECT-TYPE
The BGP ExchangedAfiSafi Peer Entry describes a BGP-specific AFI/SAFIs exchanged by one peer.
1.3.6.1.4.1.4874.2.2.29.1.8.1not-accessiblecurrent
juniBgpPeerAddressFamilyVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.8.1.1JuniVrfNamenot-accessiblecurrent
juniBgpPeerAddressFamilyAfi
OBJECT-TYPE
The AFI of the address-family in which this peer is configured.
1.3.6.1.4.1.4874.2.2.29.1.8.1.2JuniBgpAfinot-accessiblecurrent
juniBgpPeerAddressFamilySafi
OBJECT-TYPE
The SAFI of the address-family in which this peer is configured.
1.3.6.1.4.1.4874.2.2.29.1.8.1.3JuniBgpSafinot-accessiblecurrent
juniBgpPeerAddressFamilyRemoteAddress
OBJECT-TYPE
The remote IP address of this entry's BGP peer.
1.3.6.1.4.1.4874.2.2.29.1.8.1.4IpAddressnot-accessiblecurrent
juniBgpPeerAddressFamilyPeerGroup
OBJECT-TYPE
Peer group membership (null if none).
1.3.6.1.4.1.4874.2.2.29.1.8.1.5DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerAddressFamilyDefaultOriginate
OBJECT-TYPE
Set this object to true(1) in order to advertise a default route to this peer, if present.
1.3.6.1.4.1.4874.2.2.29.1.8.1.6TruthValueread-createcurrent
juniBgpPeerAddressFamilyNextHopSelf
OBJECT-TYPE
Set this object to true(1) in order to always advertise this router as the next hop.
1.3.6.1.4.1.4874.2.2.29.1.8.1.7TruthValueread-createcurrent
juniBgpPeerAddressFamilySendCommunity
OBJECT-TYPE
Set this object to true(1) in order to send COMMUNITIES attributes in updates.
1.3.6.1.4.1.4874.2.2.29.1.8.1.8TruthValueread-createcurrent
juniBgpPeerAddressFamilyDistributeListIn
OBJECT-TYPE
The inbound distribute IP access list name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.9DisplayStringread-createcurrent
juniBgpPeerAddressFamilyDistributeListOut
OBJECT-TYPE
The outbound distribute IP access list name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.10DisplayStringread-createcurrent
juniBgpPeerAddressFamilyPrefixListIn
OBJECT-TYPE
The inbound IP prefix list name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.11DisplayStringread-createcurrent
juniBgpPeerAddressFamilyPrefixListOut
OBJECT-TYPE
The outbound IP prefix list name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.12DisplayStringread-createcurrent
juniBgpPeerAddressFamilyPrefixTreeIn
OBJECT-TYPE
The inbound IP prefix tree name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.13DisplayStringread-createcurrent
juniBgpPeerAddressFamilyPrefixTreeOut
OBJECT-TYPE
The outbound IP prefix tree name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.14DisplayStringread-createcurrent
juniBgpPeerAddressFamilyFilterListIn
OBJECT-TYPE
The inbound filter AS path list name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.15DisplayStringread-createcurrent
juniBgpPeerAddressFamilyFilterListOut
OBJECT-TYPE
The outbound filter AS path list name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.16DisplayStringread-createcurrent
juniBgpPeerAddressFamilyFilterListWeight
OBJECT-TYPE
The weight filter AS path list name.
1.3.6.1.4.1.4874.2.2.29.1.8.1.17DisplayStringread-createcurrent
juniBgpPeerAddressFamilyFilterListWeightValue
OBJECT-TYPE
The weight to apply on weight filter list matches.
1.3.6.1.4.1.4874.2.2.29.1.8.1.18Unsigned32read-createcurrent
juniBgpPeerAddressFamilyRouteMapIn
OBJECT-TYPE
The inbound route-map name. An empty string means no inbound route-map.
1.3.6.1.4.1.4874.2.2.29.1.8.1.19DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerAddressFamilyRouteMapOut
OBJECT-TYPE
The outbound route-map name. An empty string means no outbound route-map.
1.3.6.1.4.1.4874.2.2.29.1.8.1.20DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerAddressFamilyRouteReflectorClient
OBJECT-TYPE
The peer is a route reflector client.
1.3.6.1.4.1.4874.2.2.29.1.8.1.21TruthValueread-createcurrent
juniBgpPeerAddressFamilyRouteLimitWarn
OBJECT-TYPE
Log a warning if pathCount exceeds this value.
1.3.6.1.4.1.4874.2.2.29.1.8.1.22Unsigned32read-createcurrent
juniBgpPeerAddressFamilyRouteLimitReset
OBJECT-TYPE
Reset connection is pathCount exceeds this value.
1.3.6.1.4.1.4874.2.2.29.1.8.1.23Unsigned32read-createcurrent
juniBgpPeerAddressFamilyRouteLimitWarnOnly
OBJECT-TYPE
Warn, but do not reset, if the path limit is exceeded.
1.3.6.1.4.1.4874.2.2.29.1.8.1.24TruthValueread-createcurrent
juniBgpPeerAddressFamilyRemovePrivateAs
OBJECT-TYPE
Remove private AS numbers from AS paths.
1.3.6.1.4.1.4874.2.2.29.1.8.1.25TruthValueread-createcurrent
juniBgpPeerAddressFamilyUnsuppressMap
OBJECT-TYPE
The unsuppress route-map name. Routes which are sent to this peer and which match this route-map are not subject to suppression by summary-only aggregates. An empty string means no unsuppress route-map.
1.3.6.1.4.1.4874.2.2.29.1.8.1.26DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerAddressFamilyInboundSoftReconfig
OBJECT-TYPE
Inbound soft-reconfiguration is enabled. If inbound soft-reconfiguration is enabled we keep a copy of each received route before inbound policy was applied.
1.3.6.1.4.1.4874.2.2.29.1.8.1.27TruthValueread-createcurrent
juniBgpPeerAddressFamilyResetConnectionType
OBJECT-TYPE
Writing a value to this object causes one individual address family within the session to the peer to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Note that hard clearing an address family within a session will bounce the session and thus also affect the other address families in the session. Reading this object has no effect and always returns resetTypeNoop.
1.3.6.1.4.1.4874.2.2.29.1.8.1.28JuniBgpResetConnectionTyperead-createcurrent
juniBgpPeerAddressFamilyRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.8.1.29RowStatusread-createcurrent
juniBgpPeerAddressFamilyAsOverride
OBJECT-TYPE
Replace the AS number of the peer by our own AS number in the AS-path attribute in UPDATEs sent to this peer.
1.3.6.1.4.1.4874.2.2.29.1.8.1.30TruthValueread-createcurrent
juniBgpPeerAddressFamilyAllowAsIn
OBJECT-TYPE
The maximum number of times our own AS number is allowed to occur in a received AS-path before that received route is considered to be a loop and therefore rejected.
1.3.6.1.4.1.4874.2.2.29.1.8.1.31Integer32 (0..10)read-createcurrent
juniBgpPeerAddressFamilySendExtendedCommunity
OBJECT-TYPE
Set this object to true(1) in order to send EXTENDED-COMMUNITIES attributes in updates.
1.3.6.1.4.1.4874.2.2.29.1.8.1.32TruthValueread-createcurrent
juniBgpPeerAddressFamilyAdvertiseCapPrefixListOrfSend
OBJECT-TYPE
Set this object to true(1) in order to send PREFIX-LIST ORF SEND CAPABILITY in Open Message.
1.3.6.1.4.1.4874.2.2.29.1.8.1.33TruthValueread-createcurrent
juniBgpPeerAddressFamilyAdvertiseCapPrefixListOrfReceive
OBJECT-TYPE
Set this object to true(1) in order to send PREFIX-LIST ORF RECEIVE CAPABILITY in Open Message.
1.3.6.1.4.1.4874.2.2.29.1.8.1.34TruthValueread-createcurrent
juniBgpPeerAddressFamilyAdvertiseCapPrefixListCiscoOrfSend
OBJECT-TYPE
Set this object to true(1) in order to send PREFIX-LIST-CISCO ORF SEND CAPABILITY in Open Message.
1.3.6.1.4.1.4874.2.2.29.1.8.1.35TruthValueread-createcurrent
juniBgpPeerAddressFamilyAdvertiseCapPrefixListCiscoOrfReceive
OBJECT-TYPE
Set this object to true(1) in order to send PREFIX-LIST-CISCO ORF RECEIVE CAPABILITY in Open Message.
1.3.6.1.4.1.4874.2.2.29.1.8.1.36TruthValueread-createcurrent
juniBgpPeerAddressFamilyReceivedCapPrefixListOrfSend
OBJECT-TYPE
The peer has sent PREFIX-LIST ORF SEND CAPABILITY to us for this address family.
1.3.6.1.4.1.4874.2.2.29.1.8.1.37TruthValueread-onlycurrent
juniBgpPeerAddressFamilyReceivedCapPrefixListOrfReceive
OBJECT-TYPE
The peer has sent PREFIX-LIST ORF RECEIVE CAPABILITY to us for this address family.
1.3.6.1.4.1.4874.2.2.29.1.8.1.38TruthValueread-onlycurrent
juniBgpPeerAddressFamilyReceivedCapPrefixListCiscoOrfSend
OBJECT-TYPE
The peer has sent PREFIX-LIST-CISCO ORF SEND CAPABILITY to us for this address family.
1.3.6.1.4.1.4874.2.2.29.1.8.1.39TruthValueread-onlycurrent
juniBgpPeerAddressFamilyReceivedCapPrefixListCiscoOrfReceive
OBJECT-TYPE
The peer has sent PREFIX-LIST-CISCO ORF RECEIVE CAPABILITY to us for this address family.
1.3.6.1.4.1.4874.2.2.29.1.8.1.40TruthValueread-onlycurrent
juniBgpPeerAddressFamilyReceivedOrfEntriesLimit
OBJECT-TYPE
Ignore received ORF entries for this address family if count exceeds this value.
1.3.6.1.4.1.4874.2.2.29.1.8.1.41Unsigned32read-createcurrent
juniBgpPeerAddressFamilyReceivedPrefixListOrfName
OBJECT-TYPE
The prefix list name containing ORF entries received from the peer for this address family
1.3.6.1.4.1.4874.2.2.29.1.8.1.42DisplayString (SIZE(0..32))read-onlycurrent
juniBgpPeerAddressFamilyMaximumPrefixStrict
OBJECT-TYPE
If the juniBgpPeerAddressFamilyInboundSoftReconfig object is set to true then routes which were rejected by inbound policy are stored in memory anyway. The juniBgpPeerAddressFamilyMaximumPrefixStrict object determines whether or not these routes count towards the maximum number of routes from the peer (as configured in juniBgpPeerAddressFamilyRouteLimitWarn and/or juniBgpPeerAddressFamilyRouteLimitReset).
1.3.6.1.4.1.4874.2.2.29.1.8.1.43TruthValueread-createcurrent
juniBgpPeerAddressFamilyUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.8.1.44Bits {juniBgpPeerAddressFamilyPeerGroup(0), juniBgpPeerAddressFamilyDefaultOriginate(1), juniBgpPeerAddressFamilyNextHopSelf(2), juniBgpPeerAddressFamilySendCommunity(3), juniBgpPeerAddressFamilyDistributeListIn(4), juniBgpPeerAddressFamilyDistributeListOut(5), juniBgpPeerAddressFamilyPrefixListIn(6), juniBgpPeerAddressFamilyPrefixListOut(7), juniBgpPeerAddressFamilyPrefixTreeIn(8), juniBgpPeerAddressFamilyPrefixTreeOut(9), juniBgpPeerAddressFamilyFilterListIn(10), juniBgpPeerAddressFamilyFilterListOut(11), juniBgpPeerAddressFamilyFilterListWeight(12), juniBgpPeerAddressFamilyFilterListWeightValue(13), juniBgpPeerAddressFamilyRouteMapIn(14), juniBgpPeerAddressFamilyRouteMapOut(15), juniBgpPeerAddressFamilyRouteReflectorClient(16), juniBgpPeerAddressFamilyRouteLimitWarn(17), juniBgpPeerAddressFamilyRouteLimitReset(18), juniBgpPeerAddressFamilyRouteLimitWarnOnly(19), juniBgpPeerAddressFamilyRemovePrivateAs(20), juniBgpPeerAddressFamilyUnsuppressMap(21), juniBgpPeerAddressFamilyInboundSoftReconfig(22), juniBgpPeerAddressFamilyAsOverride(23), juniBgpPeerAddressFamilyAllowAsIn(24), juniBgpPeerAddressFamilySendExtendedCommunity(25), juniBgpPeerAddressFamilyAdvertiseCapPrefixListOrfSend(26), juniBgpPeerAddressFamilyAdvertiseCapPrefixListOrfReceive(27), juniBgpPeerAddressFamilyAdvertiseCapPrefixListCiscoOrfSend(28), juniBgpPeerAddressFamilyAdvertiseCapPrefixListCiscoOrfReceive(29), juniBgpPeerAddressFamilyReceivedOrfEntriesLimit(30), juniBgpPeerAddressFamilyMaximumPrefixStrict(31), juniBgpPeerAddressFamilySendLabel(32), juniBgpPeerAddressFamilyDefaultOriginateRouteMap(33), juniBgpPeerAddressFamilyNextHopUnchanged(34)}read-createcurrent
juniBgpPeerAddressFamilySendLabel
OBJECT-TYPE
Send labeled prefixes to this peer for this address-family.
1.3.6.1.4.1.4874.2.2.29.1.8.1.45TruthValueread-createcurrent
juniBgpPeerAddressFamilyDefaultOriginateRouteMap
OBJECT-TYPE
The route-map to apply to the default route which is advertised to this peer as a result of setting juniBgpPeerAddressFamilyDefaultOriginate to true. An empty string means that no route-map is applied.
1.3.6.1.4.1.4874.2.2.29.1.8.1.46DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerAddressFamilySentCapabilityGracefulRestart
OBJECT-TYPE
Value true(1) means that an AFI-SAFI block for this address-family was included in the graceful-restart capability which we sent to this peer.
1.3.6.1.4.1.4874.2.2.29.1.8.1.47TruthValueread-onlycurrent
juniBgpPeerAddressFamilyReceivedCapabilityGracefulRestart
OBJECT-TYPE
Value true(1) means that an AFI-SAFI block for this address-family was included in the graceful-restart capability which we received from this peer.
1.3.6.1.4.1.4874.2.2.29.1.8.1.48TruthValueread-onlycurrent
juniBgpPeerAddressFamilySentForwardingStatePreserved
OBJECT-TYPE
Value true(1) indicates that the OPEN message most recently sent to this peer contained the graceful-restart capability which included an AFI-SAFI block for this address-family with the Forwarding-State (F) bit in the Flags for Address Family field set to one (this indicates that forwarding state has been preserved for the address family during the previous restart).
1.3.6.1.4.1.4874.2.2.29.1.8.1.49TruthValueread-onlycurrent
juniBgpPeerAddressFamilyReceivedForwardingStatePreserved
OBJECT-TYPE
Value true(1) indicates that the OPEN message most recently received from this peer contained the graceful-restart capability which included an AFI-SAFI block for this address-family with the Forwarding-State (F) bit in the Flags for Address Family field set to one (this indicates that the peer preserved forwarding state for the address family during the previous restart).
1.3.6.1.4.1.4874.2.2.29.1.8.1.50TruthValueread-onlycurrent
juniBgpPeerAddressFamilySentEndOfRibMarker
OBJECT-TYPE
Value true(1) indicates that we have sent an End-of-RIB marker for this address-family to this peer since the session became established.
1.3.6.1.4.1.4874.2.2.29.1.8.1.51TruthValueread-onlycurrent
juniBgpPeerAddressFamilyReceivedEndOfRibMarker
OBJECT-TYPE
Value true(1) indicates that we have received an End-of-RIB marker for this address-family from this peer since the session became established.
1.3.6.1.4.1.4874.2.2.29.1.8.1.52TruthValueread-onlycurrent
juniBgpPeerAddressFamilyWaitingForEndOfRibBeforeFlushStaleRoutes
OBJECT-TYPE
Value true(1) indicates that we are still waiting for an End-of-RIB marker from this peer before flushing all remaining stale routes from the address-family.
1.3.6.1.4.1.4874.2.2.29.1.8.1.53TruthValueread-onlycurrent
juniBgpPeerAddressFamilyWaitingForEndOfRibBeforePathSelection
OBJECT-TYPE
Value true(1) indicates that we are still waiting for an End-of-RIB marker from this peer before we stop deferring path selection for this address-family.
1.3.6.1.4.1.4874.2.2.29.1.8.1.54TruthValueread-onlycurrent
juniBgpPeerAddressFamilyNextHopUnchanged
OBJECT-TYPE
Set this object to true(1) in order to always advertise the the next-hop unchanged to this peer for this address-family.
1.3.6.1.4.1.4874.2.2.29.1.8.1.55TruthValueread-createcurrent
juniBgpPeerGroupTable
OBJECT-TYPE
The Juniper BGP Peer Group Table describes the BGP-specific characteristics of peer groups.
1.3.6.1.4.1.4874.2.2.29.1.9not-accessiblecurrent
juniBgpPeerGroupEntry
OBJECT-TYPE
The BGP Peer Group Entry describes BGP-specific characteristics of one peer group.
1.3.6.1.4.1.4874.2.2.29.1.9.1not-accessiblecurrent
juniBgpPeerGroupVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this peer-group is configured. The empty string indicates that this peer-group is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.9.1.1JuniVrfNamenot-accessiblecurrent
juniBgpPeerGroupGroupName
OBJECT-TYPE
The name of the Peer group this instance configures.
1.3.6.1.4.1.4874.2.2.29.1.9.1.2DisplayString (SIZE(0..32))not-accessiblecurrent
juniBgpPeerGroupAdminStatus
OBJECT-TYPE
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
1.3.6.1.4.1.4874.2.2.29.1.9.1.3INTEGER {stop(1), start(2)}read-createcurrent
juniBgpPeerGroupRemoteAsNumber
OBJECT-TYPE
Deprecated. The peer's autonomous system number. This object has been replaced by juniBgpPeerGroupFourOctetRemoteAsNumber. It is still possible to get and set this object, but if the actual remote AS number is greater than 65535, getting this object returns 23456 (AS-TRANS).
1.3.6.1.4.1.4874.2.2.29.1.9.1.4Integer32 (0..65535)read-createdeprecated
juniBgpPeerGroupRetryInterval
OBJECT-TYPE
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
1.3.6.1.4.1.4874.2.2.29.1.9.1.5Integer32 (1..65535)read-createcurrent
juniBgpPeerGroupConfigHoldTime
OBJECT-TYPE
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
1.3.6.1.4.1.4874.2.2.29.1.9.1.6Integer32 (0 | 3..65535)read-createcurrent
juniBgpPeerGroupConfigKeepAliveInterval
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of bgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.4874.2.2.29.1.9.1.7Integer32 (0..21845)read-createcurrent
juniBgpPeerGroupAsOriginationInterval
OBJECT-TYPE
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 10 seconds.
1.3.6.1.4.1.4874.2.2.29.1.9.1.8Integer32 (1..65535)read-createcurrent
juniBgpPeerGroupAdvertisementInterval
OBJECT-TYPE
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.4874.2.2.29.1.9.1.9Integer32 (1..65535)read-createcurrent
juniBgpPeerGroupDescription
OBJECT-TYPE
Peer textual description.
1.3.6.1.4.1.4874.2.2.29.1.9.1.10DisplayString (SIZE(0..80))read-createcurrent
juniBgpPeerGroupWeight
OBJECT-TYPE
The weight assigned to routes learned from peer.
1.3.6.1.4.1.4874.2.2.29.1.9.1.11Unsigned32read-createcurrent
juniBgpPeerGroupEbgpMultihop
OBJECT-TYPE
The EBGP multihop is enabled.
1.3.6.1.4.1.4874.2.2.29.1.9.1.12TruthValueread-createcurrent
juniBgpPeerGroupEbgpMultihopTtl
OBJECT-TYPE
Maximum number of hops to the external peer (only relevant if EBGP multihop turned on).
1.3.6.1.4.1.4874.2.2.29.1.9.1.13Integer32 (1..255)read-createcurrent
juniBgpPeerGroupUpdateSource
OBJECT-TYPE
The source IP address for peer connections.
1.3.6.1.4.1.4874.2.2.29.1.9.1.14IpAddressread-createcurrent
juniBgpPeerGroupMd5Password
OBJECT-TYPE
The password for MD5 authentication. Reading this object always results in an OCTET STRING of length zero.
1.3.6.1.4.1.4874.2.2.29.1.9.1.15OCTET STRING (SIZE(0..32))read-createcurrent
juniBgpPeerGroupMaxUpdateSize
OBJECT-TYPE
The maximum size in bytes of transmitted UPDATE messages.
1.3.6.1.4.1.4874.2.2.29.1.9.1.16Unsigned32read-createcurrent
juniBgpPeerGroupResetConnectionType
OBJECT-TYPE
Writing a value to this object causes the sessions to all peers in the peer-group to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop.
1.3.6.1.4.1.4874.2.2.29.1.9.1.17JuniBgpResetConnectionTyperead-createcurrent
juniBgpPeerGroupRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.9.1.18RowStatusread-createcurrent
juniBgpPeerGroupLocalAsNumber
OBJECT-TYPE
Deprecated. The local autonomous system number to be used for members. of this peer-group. Value zero (0) means that the global local automous system number (as specified in the object juniBgpPeerGroupLocalAsNumber) is used. This object has been replaced by juniBgpPeerGroupFourOctetLocalAsNumber. It is still possible to get and set this object, but if the actual local AS number is greater than 65535, getting this object returns AS-TRANS (23456).
1.3.6.1.4.1.4874.2.2.29.1.9.1.19Integer32 (0..65535)read-createdeprecated
juniBgpPeerGroupFourOctetRemoteAsNumber
OBJECT-TYPE
The peer's four-octet autonomous system number.
1.3.6.1.4.1.4874.2.2.29.1.9.1.20JuniBgpFourOctetAsNumberread-createcurrent
juniBgpPeerGroupFourOctetLocalAsNumber
OBJECT-TYPE
The four-octet local autonomous system number to be used for this peer. Value zero (0) means that the global local automous system number (as specified in the object juniBgpPeerGroupFourOctetLocalAsNumber) is used.
1.3.6.1.4.1.4874.2.2.29.1.9.1.21JuniBgpFourOctetAsNumberread-createcurrent
juniBgpPeerGroupShouldAdvertiseCapabilitiesOption
OBJECT-TYPE
Set this object to true if the capabilities option should be included in OPEN messages sent to this peer. Even if this object is set to true, BGP may decide not to include the capabilities option in OPEN messages sent to this peer (for example when it is detected that the peer does not support capability negotiation). The juniBgpPeerSentCapabilitiesOption can be used to determine whether or not the OPEN message sent to the peer actually contained the capabilities option.
1.3.6.1.4.1.4874.2.2.29.1.9.1.22TruthValueread-createcurrent
juniBgpPeerGroupShouldAdvertiseCapabilityRouteRefresh
OBJECT-TYPE
Set this object to true if the route-refresh capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the route-refresh capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the route-refresh capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityRouteRefresh can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.9.1.23TruthValueread-createcurrent
juniBgpPeerGroupShouldAdvertiseCapabilityRouteRefreshCisco
OBJECT-TYPE
Set this object to true if the route-refresh-cisco capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the route-refresh-cisco capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the route-refresh-cisco capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityRouteRefreshCisco can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.9.1.24TruthValueread-createcurrent
juniBgpPeerGroupShouldAdvertiseCapabilityFourOctetAsNumbers
OBJECT-TYPE
Set this object to true if the four-octet-as-numbers capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the four-octet-as-numbers capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the four-octet-as-numbers capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityFourOctetAsNumbers can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.9.1.25TruthValueread-createcurrent
juniBgpPeerGroupShouldAdvertiseCapabilityDynamicCapabilityNeg
OBJECT-TYPE
Set this object to true if the dynamic-capability-negotiation capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the dynamic-capability-negotiation capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the dynamic-capability-negotiation capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityDynamicCapabilityNeg can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.9.1.26TruthValueread-createcurrent
juniBgpPeerGroupUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.9.1.27Bits {juniBgpPeerGroupAdminStatus(0), juniBgpPeerGroupRetryInterval(1), juniBgpPeerGroupConfigHoldTime(2), juniBgpPeerGroupConfigKeepAliveInterval(3), juniBgpPeerGroupAsOriginationInterval(4), juniBgpPeerGroupAdvertisementInterval(5), juniBgpPeerGroupDescription(6), juniBgpPeerGroupWeight(7), juniBgpPeerGroupEbgpMultihop(8), juniBgpPeerGroupEbgpMultihopTtl(9), juniBgpPeerGroupUpdateSource(10), juniBgpPeerGroupMd5Password(11), juniBgpPeerGroupMaxUpdateSize(12), juniBgpPeerGroupFourOctetRemoteAsNumber(13), juniBgpPeerGroupFourOctetLocalAsNumber(14), juniBgpPeerGroupShouldAdvertiseCapabilitiesOption(15), juniBgpPeerGroupShouldAdvertiseCapabilityRouteRefresh(16), juniBgpPeerGroupShouldAdvertiseCapabilityRouteRefreshCisco(17), juniBgpPeerGroupShouldAdvertiseCapabilityFourOctetAsNumbers(18), juniBgpPeerGroupShouldAdvertiseCapabilityDynamicCapabilityNeg(19), juniBgpPeerGroupSiteOfOrigin(20), juniBgpPeerGroupLenient(21), juniBgpPeerGroupShouldAdvertiseCapabilityOldDynamicCapabilityNeg(22), juniBgpPeerGroupPassive(23), juniBgpPeerGroupConfiguredPeerType(24), juniBgpPeerGroupAllowAccessListName(25), juniBgpPeerGroupAllowMaxPeers(26), juniBgpPeerGroupShouldAdvertiseCapabilityGracefulRestart(27), juniBgpPeerGroupGracefulRestartRestartTime(28), juniBgpPeerGroupGracefulRestartStalePathsTime(29), juniBgpPeerGroupBfdEnabled(30), juniBgpPeerGroupBfdMinTransmitInterval(31), juniBgpPeerGroupBfdMinReceiveInterval(32), juniBgpPeerGroupBfdMultiplier(33), juniBgpPeerGroupIbgpSinglehop(34)}read-createcurrent
juniBgpPeerGroupSiteOfOrigin
OBJECT-TYPE
The site-of-origin. This site-of-origin is added to the extended communities for all routes received from the peer. When sending routes to this peer-group all routes with this extended community are filtered. The null extended community (all 8 bytes zero) means that no site-of-origin is configured for this peer. It is not allowed to set this object to any extended community other than a site-of-origin type of extended community or null.
1.3.6.1.4.1.4874.2.2.29.1.9.1.28OCTET STRING (SIZE(8))read-createcurrent
juniBgpPeerGroupLenient
OBJECT-TYPE
Enable Lenient behavior for member peers so that they are more tolerant of finite state machine errors and malformed messages received from the remote peer and avoid terminating the peer session whenever possible.
1.3.6.1.4.1.4874.2.2.29.1.9.1.29TruthValueread-createcurrent
juniBgpPeerGroupShouldAdvertiseCapabilityOldDynamicCapabilityNeg
OBJECT-TYPE
Set this object to true if the deprecated-dynamic-capability- negotiation capability should be advertised to this peer. Even if this object is set to true, BGP may decide not to advertise the deprecated-dynamic-capability-negotiation capability to this peer (for example when it is detected that the peer does not support capability negotiation or when it is detected that the peer does not support the deprecated-dynamic-capability-negotiation capability and incorrectly sends an unsupported capability notification). The juniBgpPeerSentCapabilityOldDynamicCapabilityNeg can be used to determine whether or not the capability was actually advertised to the peer.
1.3.6.1.4.1.4874.2.2.29.1.9.1.30TruthValueread-createcurrent
juniBgpPeerGroupPassive
OBJECT-TYPE
Set this object to true(1) to make members of this peer-group passive.
1.3.6.1.4.1.4874.2.2.29.1.9.1.31TruthValueread-createcurrent
juniBgpPeerGroupConfiguredPeerType
OBJECT-TYPE
The type of the members of the peer-group.
1.3.6.1.4.1.4874.2.2.29.1.9.1.32INTEGER {peerTypeNotConfigured(0), peerTypeInternal(1), peerTypeExternal(2), peerTypeConfederation(3)}read-createcurrent
juniBgpPeerGroupAllowAccessListName
OBJECT-TYPE
The name of the access-list for promiscuous peers. When an incoming connection arrives whose remote address matches this access-list the connection is accepted and a dynamic peer is created. An empty string means that promiscuous peers are disabled for this peer-group.
1.3.6.1.4.1.4874.2.2.29.1.9.1.33DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAllowMaxPeers
OBJECT-TYPE
The maximum number of dynamic peers for this peer-group. Zero means that there is no limit.
1.3.6.1.4.1.4874.2.2.29.1.9.1.34Unsigned32read-createcurrent
juniBgpPeerGroupCurrentDynamicPeerCount
OBJECT-TYPE
The current number of dynamic peers for this peer-group.
1.3.6.1.4.1.4874.2.2.29.1.9.1.35Unsigned32read-onlycurrent
juniBgpPeerGroupHighWaterMarkDynamicPeerCount
OBJECT-TYPE
The high water mark for the number of dynamic peers for this peer-group.
1.3.6.1.4.1.4874.2.2.29.1.9.1.36Unsigned32read-onlycurrent
juniBgpPeerGroupRejectedDynamicPeerCount
OBJECT-TYPE
The number of connection attempts for dynamic peers that were rejected because the number number of dynamic peers was reached.
1.3.6.1.4.1.4874.2.2.29.1.9.1.37Unsigned32read-onlycurrent
juniBgpPeerGroupShouldAdvertiseCapabilityGracefulRestart
OBJECT-TYPE
Set this object to true if the graceful-restart capability should be advertised to all members of the peer-group.
1.3.6.1.4.1.4874.2.2.29.1.9.1.38TruthValueread-createcurrent
juniBgpPeerGroupGracefulRestartRestartTime
OBJECT-TYPE
The restart-time advertised in the graceful-restart capability sent to members of this peer-group. This is the estimated time (in seconds) it will take for the BGP session to be re-established after a restart. This can be used to speed up routing convergence by the peer in case that this BGP speaker does not come back after a restart. This value (if configured) overrides the global value configured in juniBgpGracefulRestartRestartTime.
1.3.6.1.4.1.4874.2.2.29.1.9.1.39Integer32 (1..3600)read-createcurrent
juniBgpPeerGroupGracefulRestartStalePathsTime
OBJECT-TYPE
The maximum amount of time in seconds we keep stale routes after the session to a member of this peer-group goes down. This value (if configured) overrides the global value configured in juniBgpGracefulRestartStalePathsTime.
1.3.6.1.4.1.4874.2.2.29.1.9.1.40Integer32 (1..3600)read-createcurrent
juniBgpPeerGroupBfdEnabled
OBJECT-TYPE
Value true(1) the BFD is enabled for this peer-group.
1.3.6.1.4.1.4874.2.2.29.1.9.1.41TruthValueread-createcurrent
juniBgpPeerGroupBfdMinTransmitInterval
OBJECT-TYPE
The minimum interval (in milliseconds) between BFD packets sent to the remote BFD speaker. In other words, it specifies the maximum rate at which we are willing to send BFD packets.
1.3.6.1.4.1.4874.2.2.29.1.9.1.42Integer32 (100..65535)read-createcurrent
juniBgpPeerGroupBfdMinReceiveInterval
OBJECT-TYPE
The minimum interval (in milliseconds) between BFD packets received from the remote BFD speaker. In other words, it specifies the maximum rate at which we are willing to receive BFD packets.
1.3.6.1.4.1.4874.2.2.29.1.9.1.43Integer32 (100..65535)read-createcurrent
juniBgpPeerGroupBfdMultiplier
OBJECT-TYPE
How many BFD packets can be missed before the BFD session is declared down.
1.3.6.1.4.1.4874.2.2.29.1.9.1.44Integer32 (1..255)read-createcurrent
juniBgpPeerGroupIbgpSinglehop
OBJECT-TYPE
The IBGP single-hop is enabled.
1.3.6.1.4.1.4874.2.2.29.1.9.1.45TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyTable
OBJECT-TYPE
The Juniper BGP Peer Group Address Family Table describes the BGP-specific attributes of an Address Family for a peer group.
1.3.6.1.4.1.4874.2.2.29.1.10not-accessiblecurrent
juniBgpPeerGroupAddressFamilyEntry
OBJECT-TYPE
The BGP Peer Group Address Family Entry describes.
1.3.6.1.4.1.4874.2.2.29.1.10.1not-accessiblecurrent
juniBgpPeerGroupAddressFamilyVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this peer-group is configured. The empty string indicates that this peer-group is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.10.1.1JuniVrfNamenot-accessiblecurrent
juniBgpPeerGroupAddressFamilyAfi
OBJECT-TYPE
The AFI of the address-family in which this peer-group is configured.
1.3.6.1.4.1.4874.2.2.29.1.10.1.2JuniBgpAfinot-accessiblecurrent
juniBgpPeerGroupAddressFamilySafi
OBJECT-TYPE
The SAFI of the address-family in which this peer-group is configured.
1.3.6.1.4.1.4874.2.2.29.1.10.1.3JuniBgpSafinot-accessiblecurrent
juniBgpPeerGroupGroupAddressFamilyGroupName
OBJECT-TYPE
The name of the Peer group this instance configures.
1.3.6.1.4.1.4874.2.2.29.1.10.1.4DisplayString (SIZE(0..32))not-accessiblecurrent
juniBgpPeerGroupAddressFamilyDefaultOriginate
OBJECT-TYPE
Set this object to true(1) in order to advertise a default route to this peer, if present.
1.3.6.1.4.1.4874.2.2.29.1.10.1.5TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyNextHopSelf
OBJECT-TYPE
Set this object to true(1) in order to always advertise this router as the next hop.
1.3.6.1.4.1.4874.2.2.29.1.10.1.6TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilySendCommunity
OBJECT-TYPE
Set this object to true(1) in order to send COMMUNITIES attributes in updates.
1.3.6.1.4.1.4874.2.2.29.1.10.1.7TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyDistributeListIn
OBJECT-TYPE
The inbound distribute IP access list name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.8DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyDistributeListOut
OBJECT-TYPE
The outbound distribute IP access list name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.9DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyPrefixListIn
OBJECT-TYPE
The inbound IP prefix list name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.10DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyPrefixListOut
OBJECT-TYPE
The outbound IP prefix list name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.11DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyPrefixTreeIn
OBJECT-TYPE
The inbound IP prefix tree name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.12DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyPrefixTreeOut
OBJECT-TYPE
The outbound IP prefix tree name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.13DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyFilterListIn
OBJECT-TYPE
The inbound filter AS path list name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.14DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyFilterListOut
OBJECT-TYPE
The outbound filter AS path list name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.15DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyFilterListWeight
OBJECT-TYPE
The weight filter AS path list name.
1.3.6.1.4.1.4874.2.2.29.1.10.1.16DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyFilterListWeightValue
OBJECT-TYPE
The weight to apply on weight filter list matches.
1.3.6.1.4.1.4874.2.2.29.1.10.1.17Unsigned32read-createcurrent
juniBgpPeerGroupAddressFamilyRouteMapIn
OBJECT-TYPE
The inbound route-map name. An empty string means no inbound route-map.
1.3.6.1.4.1.4874.2.2.29.1.10.1.18DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyRouteMapOut
OBJECT-TYPE
The outbound route-map name. An empty string means no outbound route-map.
1.3.6.1.4.1.4874.2.2.29.1.10.1.19DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyRouteReflectorClient
OBJECT-TYPE
The peer is a route reflector client.
1.3.6.1.4.1.4874.2.2.29.1.10.1.20TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyRouteLimitWarn
OBJECT-TYPE
Log a warning if pathCount exceeds this value.
1.3.6.1.4.1.4874.2.2.29.1.10.1.21Unsigned32read-createcurrent
juniBgpPeerGroupAddressFamilyRouteLimitReset
OBJECT-TYPE
Reset connection is pathCount exceeds this value.
1.3.6.1.4.1.4874.2.2.29.1.10.1.22Unsigned32read-createcurrent
juniBgpPeerGroupAddressFamilyRouteLimitWarnOnly
OBJECT-TYPE
Warn, but do not reset, if the path limit is exceeded.
1.3.6.1.4.1.4874.2.2.29.1.10.1.23TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyRemovePrivateAs
OBJECT-TYPE
Remove private AS numbers from AS paths.
1.3.6.1.4.1.4874.2.2.29.1.10.1.24TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyUnsuppressMap
OBJECT-TYPE
The unsuppress route-map name. Routes which are sent to this peer and which match this route-map are not subject to suppression by summary-only aggregates. An empty string means no unsuppress route-map.
1.3.6.1.4.1.4874.2.2.29.1.10.1.25DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyInboundSoftReconfig
OBJECT-TYPE
Inbound soft-reconfiguration is enabled. If inbound soft-reconfiguration is enabled we keep a copy of each received route before inbound policy was applied.
1.3.6.1.4.1.4874.2.2.29.1.10.1.26TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyResetConnectionType
OBJECT-TYPE
Writing a value to this object causes one individual address family within the sessions to all peers in the peer-group to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Note that hard clearing an address family within a session will bounce the session and thus also affect the other address families in the session. Reading this object has no effect and always returns resetTypeNoop.
1.3.6.1.4.1.4874.2.2.29.1.10.1.27JuniBgpResetConnectionTyperead-createcurrent
juniBgpPeerGroupAddressFamilyRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.10.1.28RowStatusread-createcurrent
juniBgpPeerGroupAddressFamilyAsOverride
OBJECT-TYPE
Replace the AS number of the peer by our own AS number in the AS-path attribute in UPDATEs sent to this peer-group.
1.3.6.1.4.1.4874.2.2.29.1.10.1.29TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyAllowAsIn
OBJECT-TYPE
The maximum number of times our own AS number is allowed to occur in a received AS-path before that received route is considered to be a loop and therefore rejected.
1.3.6.1.4.1.4874.2.2.29.1.10.1.30Integer32 (0..10)read-createcurrent
juniBgpPeerGroupAddressFamilySendExtendedCommunity
OBJECT-TYPE
Set this object to true(1) in order to send EXTENDED-COMMUNITIES attributes in updates.
1.3.6.1.4.1.4874.2.2.29.1.10.1.31TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyAdvertiseCapPrefixListOrfSend
OBJECT-TYPE
Set this object to true(1) in order to send PREFIX-LIST ORF SEND CAPABILITY in Open Message.
1.3.6.1.4.1.4874.2.2.29.1.10.1.32TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyAdvertiseCapPrefixListCiscoOrfSend
OBJECT-TYPE
Set this object to true(1) in order to send PREFIX-LIST-CISCO ORF SEND CAPABILITY in Open Message.
1.3.6.1.4.1.4874.2.2.29.1.10.1.33TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyMaximumPrefixStrict
OBJECT-TYPE
If the juniBgpPeerGroupAddressFamilyInboundSoftReconfig object is set to true then routes which were rejected by inbound policy are stored in memory anyway. The juniBgpPeerGroupAddressFamilyMaximumPrefixStrict object determines whether or not these routes count towards the maximum number of routes from the peer-group members (as configured in juniBgpPeerGroupAddressFamilyRouteLimitWarn and/or juniBgpPeerGroupAddressFamilyRouteLimitReset).
1.3.6.1.4.1.4874.2.2.29.1.10.1.34TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.10.1.35Bits {juniBgpPeerGroupAddressFamilyDefaultOriginate(0), juniBgpPeerGroupAddressFamilyNextHopSelf(1), juniBgpPeerGroupAddressFamilySendCommunity(2), juniBgpPeerGroupAddressFamilyDistributeListIn(3), juniBgpPeerGroupAddressFamilyDistributeListOut(4), juniBgpPeerGroupAddressFamilyPrefixListIn(5), juniBgpPeerGroupAddressFamilyPrefixListOut(6), juniBgpPeerGroupAddressFamilyPrefixTreeIn(7), juniBgpPeerGroupAddressFamilyPrefixTreeOut(8), juniBgpPeerGroupAddressFamilyFilterListIn(9), juniBgpPeerGroupAddressFamilyFilterListOut(10), juniBgpPeerGroupAddressFamilyFilterListWeight(11), juniBgpPeerGroupAddressFamilyFilterListWeightValue(12), juniBgpPeerGroupAddressFamilyRouteMapIn(13), juniBgpPeerGroupAddressFamilyRouteMapOut(14), juniBgpPeerGroupAddressFamilyRouteReflectorClient(15), juniBgpPeerGroupAddressFamilyRouteLimitWarn(16), juniBgpPeerGroupAddressFamilyRouteLimitReset(17), juniBgpPeerGroupAddressFamilyRouteLimitWarnOnly(18), juniBgpPeerGroupAddressFamilyRemovePrivateAs(19), juniBgpPeerGroupAddressFamilyUnsuppressMap(20), juniBgpPeerGroupAddressFamilyInboundSoftReconfig(21), juniBgpPeerGroupAddressFamilyAsOverride(22), juniBgpPeerGroupAddressFamilyAllowAsIn(23), juniBgpPeerGroupAddressFamilySendExtendedCommunity(24), juniBgpPeerGroupAddressFamilyAdvertiseCapPrefixListOrfSend(25), juniBgpPeerGroupAddressFamilyAdvertiseCapPrefixListOrfCiscoSend(26), juniBgpPeerGroupAddressFamilyMaximumPrefixStrict(27), juniBgpPeerGroupAddressFamilySendLabel(28), juniBgpPeerGroupAddressFamilyDefaultOriginateRouteMap(29), juniBgpPeerGroupAddressFamilyNextHopUnchanged(30)}read-createcurrent
juniBgpPeerGroupAddressFamilySendLabel
OBJECT-TYPE
Send labeled prefixes to this peer for this address-family.
1.3.6.1.4.1.4874.2.2.29.1.10.1.36TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyDefaultOriginateRouteMap
OBJECT-TYPE
The route-map to apply to the default route which is advertised to this peer-group as a result of setting juniBgpPeerGroupAddressFamilyDefaultOriginate to true. An empty string means that no route-map is applied.
1.3.6.1.4.1.4874.2.2.29.1.10.1.37DisplayString (SIZE(0..32))read-createcurrent
juniBgpPeerGroupAddressFamilyNextHopUnchanged
OBJECT-TYPE
Set this object to true(1) in order to always advertise the next-hop unchanged to this peer-group in this address-family.
1.3.6.1.4.1.4874.2.2.29.1.10.1.38TruthValueread-createcurrent
juniBgpRouteFlapHistoryTable
OBJECT-TYPE
The obsolete BGP Route Flap History Table contained information about recorded route flap events. This table has been replaced by the juniBgpNewRouteFlapHistoryTable.
1.3.6.1.4.1.4874.2.2.29.1.12not-accessibleobsolete
juniBgpRouteFlapHistoryEntry
OBJECT-TYPE
An instance in the list of route flap events.
1.3.6.1.4.1.4874.2.2.29.1.12.1not-accessibleobsolete
juniBgpRouteFlapState
OBJECT-TYPE
Current state: stateAvailable(1) - indicates path is available stateSuppressedReachable(2) - indicates path is suppressed, destination is reachable stateSuppressedUnreachable(3) - indicates path in suppressed, destination is not reachable
1.3.6.1.4.1.4874.2.2.29.1.12.1.1INTEGER {stateAvailable(1), stateSuppressedReachable(2), stateSuppressedUnreachable(3)}read-onlyobsolete
juniBgpRouteFlapFigureOfMerit
OBJECT-TYPE
Calculated figure-of-merit.
1.3.6.1.4.1.4874.2.2.29.1.12.1.2Unsigned32read-onlyobsolete
juniBgpRouteFlapRemainingTime
OBJECT-TYPE
Number of seconds until reuse or removal.
1.3.6.1.4.1.4874.2.2.29.1.12.1.3Unsigned32read-onlyobsolete
juniBgpRouteFlapSuppressThreshold
OBJECT-TYPE
Damping cutoff threshold (scaled).
1.3.6.1.4.1.4874.2.2.29.1.12.1.4Unsigned32read-onlyobsolete
juniBgpRouteFlapReuseThreshold
OBJECT-TYPE
Damping reuse threshold (scaled).
1.3.6.1.4.1.4874.2.2.29.1.12.1.5Unsigned32read-onlyobsolete
juniBgpRouteFlapMaxHoldDownTime
OBJECT-TYPE
Maximum route holddown time (seconds).
1.3.6.1.4.1.4874.2.2.29.1.12.1.6Unsigned32read-onlyobsolete
juniBgpRouteFlapHalfLifeReachable
OBJECT-TYPE
Figure of merit half life for reachable routes (seconds).
1.3.6.1.4.1.4874.2.2.29.1.12.1.7Unsigned32read-onlyobsolete
juniBgpRouteFlapHalfLifeUnreachable
OBJECT-TYPE
Figure of merit half life for unreachable routes (seconds).
1.3.6.1.4.1.4874.2.2.29.1.12.1.8Unsigned32read-onlyobsolete
juniBgpRouteTable
OBJECT-TYPE
The obsolete BGP-4 Received Path Attribute Table contained additional information about paths to destination networks received from all BGP4 peers. This table has been replaced by the juniBgpNewRouteTable.
1.3.6.1.4.1.4874.2.2.29.1.13not-accessibleobsolete
juniBgpRouteEntry
OBJECT-TYPE
Additional information about a path to a network.
1.3.6.1.4.1.4874.2.2.29.1.13.1not-accessibleobsolete
juniBgpRouteOriginatorId
OBJECT-TYPE
The Originator-ID path attribute of the route if present. The juniBgpRouteOriginatorIdPresent object indicates whether the Originator-ID path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.1IpAddressread-onlyobsolete
juniBgpRouteAtomicAggregatePresent
OBJECT-TYPE
Atomic-Aggregate path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.2TruthValueread-onlyobsolete
juniBgpRouteMedPresent
OBJECT-TYPE
The Multi-Exit-Discriminator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.3TruthValueread-onlyobsolete
juniBgpRouteLocalPrefPresent
OBJECT-TYPE
The Local-Pref path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.4TruthValueread-onlyobsolete
juniBgpRouteAggregatorPresent
OBJECT-TYPE
The Aggregator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.5TruthValueread-onlyobsolete
juniBgpRouteCommunitiesPresent
OBJECT-TYPE
The Communities path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.6TruthValueread-onlyobsolete
juniBgpRouteOriginatorIdPresent
OBJECT-TYPE
The Originator-ID path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.7TruthValueread-onlyobsolete
juniBgpRouteClusterListPresent
OBJECT-TYPE
The Cluster-List path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.8TruthValueread-onlyobsolete
juniBgpRouteWeight
OBJECT-TYPE
The weight of the route.
1.3.6.1.4.1.4874.2.2.29.1.13.1.9Unsigned32read-onlyobsolete
juniBgpRouteVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this route is present. The empty string indicates that this route is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.13.1.10JuniVrfNamenot-accessibleobsolete
juniBgpRouteAfi
OBJECT-TYPE
The AFI of the address-family in which this route is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.11JuniBgpAfinot-accessibleobsolete
juniBgpRouteSafi
OBJECT-TYPE
The SAFI of the address-family in which this route is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.12JuniBgpSafinot-accessibleobsolete
juniBgpRoutePeer
OBJECT-TYPE
The IP address of the peer from which the route was received. This object has value 0.0.0.0 is the route was a locally originated route.
1.3.6.1.4.1.4874.2.2.29.1.13.1.13IpAddressnot-accessibleobsolete
juniBgpRouteIpAddrPrefixLen
OBJECT-TYPE
Length in bits of the IP address prefix of the route.
1.3.6.1.4.1.4874.2.2.29.1.13.1.14Integer32 (0..32)not-accessibleobsolete
juniBgpRouteIpAddrPrefix
OBJECT-TYPE
The IP address prefix of the route. This object is an IP address containing the prefix with length specified by juniBgpNewRouteIpAddrPrefixLen. Any bits beyond the length specified by juniBgpNewRouteIpAddrPrefixLen are zeroed.
1.3.6.1.4.1.4874.2.2.29.1.13.1.15IpAddressnot-accessibleobsolete
juniBgpRouteRouteType
OBJECT-TYPE
The type of the route.
1.3.6.1.4.1.4874.2.2.29.1.13.1.16INTEGER {routeTypeReceived(1), routeTypeNetwork(2), routeTypeRedistributed(3), routeTypeAggregate(4), routeTypeAutoSummary(5)}not-accessibleobsolete
juniBgpRouteOrigin
OBJECT-TYPE
The value of the Origin path attribute.
1.3.6.1.4.1.4874.2.2.29.1.13.1.17INTEGER {igp(1), egp(2), incomplete(3)}read-onlyobsolete
juniBgpRouteASPathSegment
OBJECT-TYPE
The value of the AS-path path attribute (as encoded in the received update message).
1.3.6.1.4.1.4874.2.2.29.1.13.1.18OCTET STRING (SIZE(2..255))read-onlyobsolete
juniBgpRouteNextHop
OBJECT-TYPE
The value of the Next-Hop path attribute.
1.3.6.1.4.1.4874.2.2.29.1.13.1.19IpAddressread-onlyobsolete
juniBgpRouteMultiExitDisc
OBJECT-TYPE
The value of the Multi-Exit-Discriminator path attribute if present. The juniBgpRouteMedPresent object indicates whether the Multi-Exit-Discriminator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.20Unsigned32read-onlyobsolete
juniBgpRouteLocalPref
OBJECT-TYPE
The value of the Local-Pref path attribute if present. The juniBgpRouteLocalPrefPresent object indicates whether the Local-Pref path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.21Unsigned32read-onlyobsolete
juniBgpRouteAtomicAggregate
OBJECT-TYPE
Whether or not the local system has selected a less specific route without selecting a more specific route.
1.3.6.1.4.1.4874.2.2.29.1.13.1.22INTEGER {lessSpecificRouteNotSelected(1), lessSpecificRouteSelected(2)}read-onlyobsolete
juniBgpRouteAggregatorAS
OBJECT-TYPE
The value of the AS field in the Aggregator path attribute if present. The juniBgpRouteAggregatorPresent object indicates whether the Aggregator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.23Integer32 (0..65535)read-onlyobsolete
juniBgpRouteAggregatorAddress
OBJECT-TYPE
The value of the address field in the Aggregator path attribute if present. The juniBgpRouteAggregatorPresent object indicates whether the Aggregator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.13.1.24IpAddressread-onlyobsolete
juniBgpRouteBestInIpRouteTable
OBJECT-TYPE
When BGP places a routes in the IP route table, that route may not be used for forwarding traffic if there are other routes (e.g. IGP routes or static routes) to that same prefix with a better administrative distance in the IP route table. This object indicates whether or not the BGP route in the IP route table is the best route (and hence is used for forwarding traffic).
1.3.6.1.4.1.4874.2.2.29.1.13.1.25TruthValueread-onlyobsolete
juniBgpRouteUnknown
OBJECT-TYPE
One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
1.3.6.1.4.1.4874.2.2.29.1.13.1.26OCTET STRING (SIZE(0..255))read-onlyobsolete
juniBgpRouteExtendedCommunitiesPresent
OBJECT-TYPE
Is the Extended-Communities path attribute present?
1.3.6.1.4.1.4874.2.2.29.1.13.1.27TruthValueread-onlyobsolete
juniBgpRouteValid
OBJECT-TYPE
Is the route valid? The route is declared invalid if there is something wrong with it which is not serious enough for sending a notification, but it serious enough for not placing it in the IP route table or propagating it to other peers (for example the next-hop of the route is a local address).
1.3.6.1.4.1.4874.2.2.29.1.13.1.28TruthValueread-onlyobsolete
juniBgpRouteSuppressedBy
OBJECT-TYPE
Indicates whether or not the route is suppressed, and if so why: suppressedByNothing - Route is not suppressed. suppressedByAggregate - Route is suppressed by a summary-only aggregate. suppressedByAutoSummary - Route is suppressed by an auto-summary. suppressedByDampening - Route is suppressed as a result of route-flap dampening.
1.3.6.1.4.1.4874.2.2.29.1.13.1.29INTEGER {suppressedByNothing(1), suppressedByAggregate(2), suppressedByAutoSummary(3), suppressedByDampening(4)}read-onlyobsolete
juniBgpRouteNextHopReachable
OBJECT-TYPE
Is the indirect next-hop of the route reachable (i.e. can the indirect next-hop of the route be resolved to at least one direct next-hop)?
1.3.6.1.4.1.4874.2.2.29.1.13.1.30TruthValueread-onlyobsolete
juniBgpRouteSynchronizedWithIgp
OBJECT-TYPE
Is the route is synchronized (i.e. is there is an IGP route to the same prefix in the IP route table)?
1.3.6.1.4.1.4874.2.2.29.1.13.1.31TruthValueread-onlyobsolete
juniBgpRoutePlaceInIpRouteTable
OBJECT-TYPE
Has a BGP route for this prefix been placed in the IP route table?
1.3.6.1.4.1.4874.2.2.29.1.13.1.32TruthValueread-onlyobsolete
juniBgpRouteAdvertiseToExternalPeers
OBJECT-TYPE
Should this route be advertised to external peers?
1.3.6.1.4.1.4874.2.2.29.1.13.1.33TruthValueread-onlyobsolete
juniBgpRouteAdvertiseToInternalPeers
OBJECT-TYPE
Should this route be advertised to internal peers?
1.3.6.1.4.1.4874.2.2.29.1.13.1.34TruthValueread-onlyobsolete
juniBgpRouteDistinguisher
OBJECT-TYPE
The Route Distinguisher (RD) of the route. This object has an undefined value for non-VPN routes.
1.3.6.1.4.1.4874.2.2.29.1.13.1.35OCTET STRING (SIZE(8))read-onlyobsolete
juniBgpRouteMplsLabel
OBJECT-TYPE
The MPLS label for the route.
1.3.6.1.4.1.4874.2.2.29.1.13.1.36Unsigned32read-onlyobsolete
juniBgpRouteNextHopMetric
OBJECT-TYPE
The metric of direct next-hop of this BGP route.
1.3.6.1.4.1.4874.2.2.29.1.13.1.37Unsigned32read-onlyobsolete
juniBgpRouteCommunityTable
OBJECT-TYPE
The obsolete BGP-4 Path Community Table contained information about communities within destination networks received from all BGP4 peers. This table has been replaced by the juniBgpNewRouteCommunityTable.
1.3.6.1.4.1.4874.2.2.29.1.14not-accessibleobsolete
juniBgpRouteCommunityEntry
OBJECT-TYPE
Community attribute information within a path to a network.
1.3.6.1.4.1.4874.2.2.29.1.14.1not-accessibleobsolete
juniBgpRouteCommunityNumber
OBJECT-TYPE
The community number.
1.3.6.1.4.1.4874.2.2.29.1.14.1.1Unsigned32read-onlyobsolete
juniBgpRouteClusterIdTable
OBJECT-TYPE
The obsolete BGP-4 Path ClusterId Table contained information about router reflector cluster IDs. This table has been replaced by the juniBgpNewRouteClusterIdTable.
1.3.6.1.4.1.4874.2.2.29.1.15not-accessibleobsolete
juniBgpRouteClusterIdEntry
OBJECT-TYPE
ClusterId attribute information within a path to a network.
1.3.6.1.4.1.4874.2.2.29.1.15.1not-accessibleobsolete
juniBgpRouteClusterId
OBJECT-TYPE
The cluster id.
1.3.6.1.4.1.4874.2.2.29.1.15.1.1Unsigned32read-onlyobsolete
juniBgpNetworkTable
OBJECT-TYPE
The BGP Network Table controls what networks are originated by this BGP router.
1.3.6.1.4.1.4874.2.2.29.1.16not-accessiblecurrent
juniBgpNetworkEntry
OBJECT-TYPE
An instance in the list of networks originated by this BGP router.
1.3.6.1.4.1.4874.2.2.29.1.16.1not-accessiblecurrent
juniBgpNetworkVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this network is configured. The empty string indicates that this network is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.16.1.1JuniVrfNamenot-accessiblecurrent
juniBgpNetworkAfi
OBJECT-TYPE
The AFI of the address-family in which this network is configured.
1.3.6.1.4.1.4874.2.2.29.1.16.1.2JuniBgpAfinot-accessiblecurrent
juniBgpNetworkSafi
OBJECT-TYPE
The SAFI of the address-family in which this network is configured.
1.3.6.1.4.1.4874.2.2.29.1.16.1.3JuniBgpSafinot-accessiblecurrent
juniBgpNetworkIpAddrPrefix
OBJECT-TYPE
An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgpRouteIpAddrPrefixLen. Any bits beyond the length specified by bgpRouteIpAddrPrefixLen are zeroed.
1.3.6.1.4.1.4874.2.2.29.1.16.1.4IpAddressnot-accessiblecurrent
juniBgpNetworkIpAddrPrefixLen
OBJECT-TYPE
Length in bits of the IP address prefix in the Network Layer Reachability Information field.
1.3.6.1.4.1.4874.2.2.29.1.16.1.5Integer32 (0..32)not-accessiblecurrent
juniBgpNetworkBackdoor
OBJECT-TYPE
Set this object to true(1) in order to enable BGP backdoor in this network. This object can only be set at row creation.
1.3.6.1.4.1.4874.2.2.29.1.16.1.6TruthValueread-createcurrent
juniBgpNetworkRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.16.1.7RowStatusread-createcurrent
juniBgpNetworkWeightSpecified
OBJECT-TYPE
If this object is set to true(1) then the BGP weight of this network is set to the value specified in juniBgpNetworkWeightValue. This object can only be set at row creation.
1.3.6.1.4.1.4874.2.2.29.1.16.1.8TruthValueread-createcurrent
juniBgpNetworkWeight
OBJECT-TYPE
If juniBgpNetworkWeight specified is set to true(1) then this object specifies the weight of the network. Otherwise the weight of the network is determined by the IGP metric of the prefix. This object can only be set at row creation.
1.3.6.1.4.1.4874.2.2.29.1.16.1.9Integer32 (0..65535)read-createcurrent
juniBgpNetworkRouteMap
OBJECT-TYPE
The name of the route-map used to set the path attributes of this network. A zero length route-map name means don't use a route-map for this. This object can only be set at row creation.
1.3.6.1.4.1.4874.2.2.29.1.16.1.10DisplayString (SIZE(0..32))read-createcurrent
juniBgpNetworkUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.16.1.11Bits {juniBgpNetworkBackdoor(0), juniBgpNetworkWeight(1), juniBgpNetworkRouteMap(2)}read-createcurrent
juniBgpAggregateTable
OBJECT-TYPE
The BGP Aggregate Table controls the consolidation of route information.
1.3.6.1.4.1.4874.2.2.29.1.17not-accessiblecurrent
juniBgpAggregateEntry
OBJECT-TYPE
An instance in the list of route aggregation.
1.3.6.1.4.1.4874.2.2.29.1.17.1not-accessiblecurrent
juniBgpAggregateVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this aggregate is configured. The empty string indicates that this aggregate is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.17.1.1JuniVrfNamenot-accessiblecurrent
juniBgpAggregateAfi
OBJECT-TYPE
The AFI of the address-family in which this aggregate is configured.
1.3.6.1.4.1.4874.2.2.29.1.17.1.2JuniBgpAfinot-accessiblecurrent
juniBgpAggregateSafi
OBJECT-TYPE
The SAFI of the address-family in which this aggregate is configured.
1.3.6.1.4.1.4874.2.2.29.1.17.1.3JuniBgpSafinot-accessiblecurrent
juniBgpAggregateIpAddrPrefix
OBJECT-TYPE
An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgpRouteIpAddrPrefixLen. Any bits beyond the length specified by bgpRouteIpAddrPrefixLen are zeroed.
1.3.6.1.4.1.4874.2.2.29.1.17.1.4IpAddressnot-accessiblecurrent
juniBgpAggregateIpAddrPrefixLen
OBJECT-TYPE
Length in bits of the IP address prefix in the Network Layer Reachability Information field.
1.3.6.1.4.1.4874.2.2.29.1.17.1.5Integer32 (0..32)not-accessiblecurrent
juniBgpAggregateAsSet
OBJECT-TYPE
Set this object to true(1) in order to generate AS_set path information by creating an aggregate entry that consists of all elements contained in all paths that are being summarized. This object can only be set at row creation.
1.3.6.1.4.1.4874.2.2.29.1.17.1.6TruthValueread-createcurrent
juniBgpAggregateSummaryOnly
OBJECT-TYPE
Set this object to true(1) in order to filter specific routes from updates. By doing that, advertisements of more specific routes will be suppressed to all neighbors. This object can only be set at row creation.
1.3.6.1.4.1.4874.2.2.29.1.17.1.7TruthValueread-createcurrent
juniBgpAggregateAttributeMap
OBJECT-TYPE
The name of the route-map used to set the attributes of the aggregate An empty string means no route-map for this purpose.
1.3.6.1.4.1.4874.2.2.29.1.17.1.8DisplayString (SIZE(0..32))read-createcurrent
juniBgpAggregateAdvertiseMap
OBJECT-TYPE
The name of the route-map used to select routes covered by the aggregate (for as-set aggregates the path attributes of the aggregate route are created by summarizing the path attributes of the covered routes). An empty string means no route-map for this purpose.
1.3.6.1.4.1.4874.2.2.29.1.17.1.9DisplayString (SIZE(0..32))read-createcurrent
juniBgpAggregateRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.17.1.10RowStatusread-createcurrent
juniBgpAggregateSuppressMap
OBJECT-TYPE
The suppress route-map name. If a suppress route-map has been specified, all routes which are covered by the aggregate and which match the suppress route-map are suppressed. An empty string means no inbound route-map.
1.3.6.1.4.1.4874.2.2.29.1.17.1.11DisplayString (SIZE(0..32))read-createcurrent
juniBgpAggregateUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.17.1.12Bits {juniBgpAggregateAsSet(0), juniBgpAggregateSummaryOnly(1), juniBgpAggregateAttributeMap(2), juniBgpAggregateAdvertiseMap(3), juniBgpAggregateSuppressMap(4)}read-createcurrent
juniBgpVrfTable
OBJECT-TYPE
The Juniper BGP VRF Table describes the BGP-specific characteristics of a VPN routing forwarding instance.
1.3.6.1.4.1.4874.2.2.29.1.18not-accessiblecurrent
juniBgpVrfEntry
OBJECT-TYPE
The BGP VRF Entry describes BGP-specific characteristics of one VRF.
1.3.6.1.4.1.4874.2.2.29.1.18.1not-accessiblecurrent
juniBgpVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance.
1.3.6.1.4.1.4874.2.2.29.1.18.1.1JuniVrfNamenot-accessiblecurrent
juniBgpVrfSynchronization
OBJECT-TYPE
Set this object to true(1) in order to have IGP route synchronization enabled.
1.3.6.1.4.1.4874.2.2.29.1.18.1.2TruthValueread-createcurrent
juniBgpVrfAutoSummary
OBJECT-TYPE
Set this object to true(1) in order to automatically summarize redistributed routes to their natural network mask.
1.3.6.1.4.1.4874.2.2.29.1.18.1.3TruthValueread-createcurrent
juniBgpVrfExternalDistance
OBJECT-TYPE
Obsolete administrative distance for external routes. Replaced by juniBgpAddressFamilyExternalDistance.
1.3.6.1.4.1.4874.2.2.29.1.18.1.4Integer32 (1..255)read-createobsolete
juniBgpVrfInternalDistance
OBJECT-TYPE
Obsolete administrative distance for internal routes. Replaced by juniBgpAddressFamilyInternalDistance.
1.3.6.1.4.1.4874.2.2.29.1.18.1.5Integer32 (1..255)read-createobsolete
juniBgpVrfLocalDistance
OBJECT-TYPE
Obsolete administrative distance for local routes. Replaced by juniBgpAddressFamilyLocalDistance.
1.3.6.1.4.1.4874.2.2.29.1.18.1.6Integer32 (1..255)read-createobsolete
juniBgpVrfResetConnectionType
OBJECT-TYPE
Writing a value to this object causes the sessions to all peers in this VRF to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop.
1.3.6.1.4.1.4874.2.2.29.1.18.1.7JuniBgpResetConnectionTyperead-createcurrent
juniBgpVrfRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.18.1.8RowStatusread-createcurrent
juniBgpVrfOperationalState
OBJECT-TYPE
The BGP VRF operational state.
1.3.6.1.4.1.4874.2.2.29.1.18.1.9INTEGER {none(0), up(1), down(2), overload(3)}read-onlycurrent
juniBgpVrfAddUnicastRoutesToMulticastView
OBJECT-TYPE
Set this object to true(1) in order to add routes learnt by IPv4 Unicast BGP to the multicast route table.
1.3.6.1.4.1.4874.2.2.29.1.18.1.10TruthValueread-createcurrent
juniBgpVrfMaximumPathsEbgp
OBJECT-TYPE
The maximum number of routes received from EBGP peers which BGP can select as equal cost. Zero means that routes from EBGP peers cannot be selected as equal cost.
1.3.6.1.4.1.4874.2.2.29.1.18.1.11Integer32 (0..16)read-createcurrent
juniBgpVrfMaximumPathsIbgp
OBJECT-TYPE
The maximum number of routes received from IBGP peers which BGP can select as equal cost. Zero means that routes from IBGP peers cannot be selected as equal cost.
1.3.6.1.4.1.4874.2.2.29.1.18.1.12Integer32 (0..16)read-createcurrent
juniBgpVrfUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.18.1.13Bits {juniBgpVrfSynchronization(0), juniBgpVrfAutoSummary(1), juniBgpVrfExternalDistance(2), juniBgpVrfInternalDistance(3), juniBgpVrfLocalDistance(4), juniBgpVrfAddUnicastRoutesToMulticastView(5), juniBgpVrfMaximumPathsEbgp(6), juniBgpVrfMaximumPathsIbgp(7), juniBgpVrfMaximumPathsEIbgp(8)}read-createcurrent
juniBgpVrfMaximumPathsEIbgp
OBJECT-TYPE
The maximum number of routes received from both EBGP and IBGP peers which BGP can select as equal cost. Zero means that routes from both EBGP and IBGP peers cannot be selected as equal cost.
1.3.6.1.4.1.4874.2.2.29.1.18.1.14Integer32 (0..16)read-createcurrent
juniBgpVrfCarriersCarrierModeEnabled
OBJECT-TYPE
Obsolete the BGP carrier's carrier flag since there is no need for it when in carrier's carrier mode.
1.3.6.1.4.1.4874.2.2.29.1.18.1.16TruthValueread-onlyobsolete
juniBgpAddressFamilyTable
OBJECT-TYPE
The BGP AddressFamily Entry describes BGP-specific characteristics of one AddressFamily.
1.3.6.1.4.1.4874.2.2.29.1.19not-accessiblecurrent
juniBgpAddressFamilyEntry
OBJECT-TYPE
The BGP address family entry
1.3.6.1.4.1.4874.2.2.29.1.19.1not-accessiblecurrent
juniBgpAddressFamilyVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this address-family is configured. The empty string indicates that this address-family is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.19.1.1JuniVrfNamenot-accessiblecurrent
juniBgpAddressFamilyAfi
OBJECT-TYPE
The AFI of the address-family.
1.3.6.1.4.1.4874.2.2.29.1.19.1.2JuniBgpAfinot-accessiblecurrent
juniBgpAddressFamilySafi
OBJECT-TYPE
The SAFI of the address-family.
1.3.6.1.4.1.4874.2.2.29.1.19.1.3JuniBgpSafinot-accessiblecurrent
juniBgpAddressFamilyDefaultOriginate
OBJECT-TYPE
Set this object to true(1) in order to advertise a default route, if present.
1.3.6.1.4.1.4874.2.2.29.1.19.1.4TruthValueread-createcurrent
juniBgpAddressFamilyRouteFlapDampening
OBJECT-TYPE
Set this object to true(1) in order to enable route flap dampening.
1.3.6.1.4.1.4874.2.2.29.1.19.1.5TruthValueread-createcurrent
juniBgpAddressFamilyDampeningSuppressThreshold
OBJECT-TYPE
The dampening cutoff threshold (scaled).
1.3.6.1.4.1.4874.2.2.29.1.19.1.6Unsigned32read-createcurrent
juniBgpAddressFamilyDampeningReuseThreshold
OBJECT-TYPE
The dampening reuse threshold (scaled).
1.3.6.1.4.1.4874.2.2.29.1.19.1.7Unsigned32read-createcurrent
juniBgpAddressFamilyDampeningMaxHoldDownTime
OBJECT-TYPE
Maximum route holddown time, in seconds.
1.3.6.1.4.1.4874.2.2.29.1.19.1.8Unsigned32read-createcurrent
juniBgpAddressFamilyDampeningHalfLifeReachable
OBJECT-TYPE
Figure of merit half life for reachable routes, in seconds.
1.3.6.1.4.1.4874.2.2.29.1.19.1.9Unsigned32read-createcurrent
juniBgpAddressFamilyDampeningHalfLifeUnreachable
OBJECT-TYPE
Figure of merit half life for unreachable routes, in seconds.
1.3.6.1.4.1.4874.2.2.29.1.19.1.10Unsigned32read-createcurrent
juniBgpAddressFamilyDampeningRouteMapName
OBJECT-TYPE
The name of the route-map used to determine which routes are dampened and which aren't and to set the dampening parameters for those routes which are dampenend. A zero length route-map name means don't use a route-map for this.
1.3.6.1.4.1.4874.2.2.29.1.19.1.11DisplayString (SIZE(0..32))read-createcurrent
juniBgpAddressFamilyResetConnectionType
OBJECT-TYPE
Writing a value to this object causes one individual address family within the sessions to all peers in this VRF to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Note that hard clearing an address family within a session will bounce the session and thus also affect the other address families in the session. Reading this object has no effect and always returns resetTypeNoop.
1.3.6.1.4.1.4874.2.2.29.1.19.1.12JuniBgpResetConnectionTyperead-createcurrent
juniBgpAddressFamilyRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.19.1.13RowStatusread-createcurrent
juniBgpAddressFamilyOperationalState
OBJECT-TYPE
The BGP address family operational state.
1.3.6.1.4.1.4874.2.2.29.1.19.1.14INTEGER {none(0), up(1), down(2), overload(3)}read-onlycurrent
juniBgpAddressFamilyUnconfiguredAttributes
OBJECT-TYPE
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
1.3.6.1.4.1.4874.2.2.29.1.19.1.15Bits {juniBgpAddressFamilyDefaultOriginate(0), juniBgpAddressFamilyRouteFlapDampening(1), juniBgpAddressFamilyDampeningSuppressThreshold(2), juniBgpAddressFamilyDampeningReuseThreshold(3), juniBgpAddressFamilyDampeningMaxHoldDownTime(4), juniBgpAddressFamilyDampeningHalfLifeReachable(5), juniBgpAddressFamilyDampeningHalfLifeUnreachable(6), juniBgpAddressFamilyDampeningRouteMapName(7), juniBgpAddressFamilyExternalDistance(8), juniBgpAddressFamilyInternalDistance(9), juniBgpAddressFamilyLocalDistance(10), juniBgpAddressFamilyDefaultOriginateRouteMap(11), juniBgpAddressFamilyCheckVpnNextHops(12)}read-createcurrent
juniBgpAddressFamilyExternalDistance
OBJECT-TYPE
The administrative distance for external routes.
1.3.6.1.4.1.4874.2.2.29.1.19.1.16Integer32 (1..255)read-createcurrent
juniBgpAddressFamilyInternalDistance
OBJECT-TYPE
The administrative distance for internal routes.
1.3.6.1.4.1.4874.2.2.29.1.19.1.17Integer32 (1..255)read-createcurrent
juniBgpAddressFamilyLocalDistance
OBJECT-TYPE
The administrative distance for local routes.
1.3.6.1.4.1.4874.2.2.29.1.19.1.18Integer32 (1..255)read-createcurrent
juniBgpAddressFamilyDefaultOriginateRouteMap
OBJECT-TYPE
The route-map to apply to the default route which is advertised as a result of setting juniBgpAddressFamilyDefaultOriginate to true. An empty string means that no route-map is applied.
1.3.6.1.4.1.4874.2.2.29.1.19.1.19DisplayString (SIZE(0..32))read-createcurrent
juniBgpAddressFamilyIpIntfProfileNameForMplsHeads
OBJECT-TYPE
Obsolete the name of the IP interface profile used by BGP to create IP dynamic interfaces on top of MPLS stacked tunnel heads. When support for BGP-created IP dynamic interfaces was removed, BGP profile names were obsoleted too.
1.3.6.1.4.1.4874.2.2.29.1.19.1.20DisplayString (SIZE(0..80))read-createobsolete
juniBgpAddressFamilyIpIntfProfileNameForMplsTails
OBJECT-TYPE
Obsolete the name of the IP interface profile used by BGP to create IP dynamic interfaces on top of MPLS stacked tunnel tails. When support for BGP-created IP dynamic interfaces was removed, BGP profile names were obsoleted too.
1.3.6.1.4.1.4874.2.2.29.1.19.1.21DisplayString (SIZE(0..80))read-createobsolete
juniBgpAddressFamilyIpIntfServiceProfileNameForMplsHeads
OBJECT-TYPE
Obsolete the name of the IP interface service-profile used by BGP to create IP dynamic interfaces on top of MPLS stacked tunnel heads. When support for BGP-created dynamic interfaces was removed, BGP profile names were obsoleted too.
1.3.6.1.4.1.4874.2.2.29.1.19.1.22DisplayString (SIZE(0..80))read-createobsolete
juniBgpAddressFamilyIpIntfServiceProfileNameForMplsTails
OBJECT-TYPE
The name of the IP interface service-profile used by BGP to create IP dynamic interfaces on top of MPLS stacked tunnel tails. When support for BGP-created dynamic interfaces was removed, BGP profile names were obsoleted too.
1.3.6.1.4.1.4874.2.2.29.1.19.1.23DisplayString (SIZE(0..80))read-createobsolete
juniBgpAddressFamilyCheckVpnNextHops
OBJECT-TYPE
If this object is set to true, the reachability of the next-hops of routes in this address-family are checked. If this object is set to false, the next-hops if routes in this address-families are always considered to be reachable. This attribute only applies to address- families with SAFI 128 (labeled-vpn-unicast). For all other address- families this attributes is meaningless and attempting to set the attribute will result in an error.
1.3.6.1.4.1.4874.2.2.29.1.19.1.24TruthValueread-createcurrent
juniBgpAddressFamilyPathSelectionIsDeferred
OBJECT-TYPE
Is path selection for the address-family currently deferred?
1.3.6.1.4.1.4874.2.2.29.1.19.1.25TruthValueread-onlycurrent
juniBgpAddressFamilyPreventBgpRoutesFromBeingPushedToLineCards
OBJECT-TYPE
Is BGP still in the process of placing fresh routes in the route table after a restart? During this period the line cards are forced to continue forwarding using the old stale routes.
1.3.6.1.4.1.4874.2.2.29.1.19.1.26TruthValueread-onlycurrent
juniBgpAddressFamilyTimeUntilPathSelectionDeferTimerExpires
OBJECT-TYPE
The number of seconds until the path selection defer timer expires or zero if it is not running.
1.3.6.1.4.1.4874.2.2.29.1.19.1.27Integer32 (0..65535)read-onlycurrent
juniBgpStorageGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.29.1.20
juniBgpStorageInitialHeapSize
OBJECT-TYPE
Obsolete initial size of the BGP heap in octets. The BGP heap is used for a small number of variable sized data structures.
1.3.6.1.4.1.4874.2.2.29.1.20.1JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxHeapSize
OBJECT-TYPE
Obsolete maximum size of the BGP heap in octets.
1.3.6.1.4.1.4874.2.2.29.1.20.2JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialVrfPoolSize
OBJECT-TYPE
Obsolete initial size of the VRF pool in entries. One entry is allocated from the VRF pool for each VRF used by BGP.
1.3.6.1.4.1.4874.2.2.29.1.20.4JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxVrfPoolSize
OBJECT-TYPE
Obsolete maximum size of the VRF pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.5JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialAddressFamilyPoolSize
OBJECT-TYPE
Obsolete initial size of the address-family pool in entries. One entry is allocated from the address-family pool for each address-family used by BGP.
1.3.6.1.4.1.4874.2.2.29.1.20.6JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxAddressFamilyPoolSize
OBJECT-TYPE
Obsolete initial size of the address-family pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.7JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialPeerPoolSize
OBJECT-TYPE
Obsolete initial size of the peer pool in entries. One entry is allocated from the peer pool for each peer configured in BGP.
1.3.6.1.4.1.4874.2.2.29.1.20.8JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxPeerPoolSize
OBJECT-TYPE
Obsolete maximum size of the peer pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.9JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialPeerAfPoolSize
OBJECT-TYPE
Obsolete initial size of the peer-address-family pool in entries. One entry is allocated from the peer-address-family pool for each address family activated for any peer in BGP (including the IPv4 unicast address families which are usually activated by default for each peer).
1.3.6.1.4.1.4874.2.2.29.1.20.10JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxPeerAfPoolSize
OBJECT-TYPE
Obsolete maximum size of the peer-address-family pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.11JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialPeerGroupPoolSize
OBJECT-TYPE
Obsolete initial size of the peer-group pool in entries. One entry is allocated from the peer-group pool for each peer-group configured in BGP.
1.3.6.1.4.1.4874.2.2.29.1.20.12JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxPeerGroupPoolSize
OBJECT-TYPE
Obsolete maximum size of the peer-group pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.13JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialPeerGroupAfPoolSize
OBJECT-TYPE
Obsolete initial size of the peer-group-address-family pool in entries. One entry is allocated from the peer-group-address-family pool for each address family activated for any peer-group in BGP (including the IPv4 unicast address families which are usually activated by default for each peer-group).
1.3.6.1.4.1.4874.2.2.29.1.20.14JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxPeerGroupAfPoolSize
OBJECT-TYPE
Obsolete maximum size of the peer-group-address-family pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.15JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialNetworkPoolSize
OBJECT-TYPE
Obsolete initial size of the network pool in entries. One entry is allocated from the network pool for each network configured in BGP.
1.3.6.1.4.1.4874.2.2.29.1.20.16JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxNetworkPoolSize
OBJECT-TYPE
Obsolete maximum size of the network pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.17JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialAggregatePoolSize
OBJECT-TYPE
Obsolete initial size of the aggregate pool in entries. One entry is allocated from the aggregate pool for each aggregate configured in BGP.
1.3.6.1.4.1.4874.2.2.29.1.20.18JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxAggregatePoolSize
OBJECT-TYPE
Obsolete maximum size of the aggregate pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.19JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialDestinationPoolSize
OBJECT-TYPE
Obsolete initial size of the destination pool in entries. One entry is allocated from the destination pool for each unique prefix in the BGP RIB.
1.3.6.1.4.1.4874.2.2.29.1.20.20JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxDestinationPoolSize
OBJECT-TYPE
Obsolete maximum size of the destination pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.21JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialRoutePoolSize
OBJECT-TYPE
Obsolete initial size of the route pool in entries. One entry is allocated from the route pool for each received non-VPN route in the BGP RIB.
1.3.6.1.4.1.4874.2.2.29.1.20.22JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxRoutePoolSize
OBJECT-TYPE
Obsolete maximum size of the route pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.23JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialAttributesPoolSize
OBJECT-TYPE
Obsolete initial size of the attributes pool in entries. One entry is allocated from the attributes pool for each unique combination of path attributes of routes in the BGP RIB.
1.3.6.1.4.1.4874.2.2.29.1.20.24JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxAttributesPoolSize
OBJECT-TYPE
Obsolete maximum size of the attributes pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.25JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialRouteFlapHistoryPoolSize
OBJECT-TYPE
Obsolete initial size of the route-flap-history pool in entries. One entry is allocated from the route-flap-history pool for each route in the BGP RIB which has route-flap dampening history associated with it.
1.3.6.1.4.1.4874.2.2.29.1.20.26JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxRouteFlapHistoryPoolSize
OBJECT-TYPE
Obsolete maximum size of the route-flap-history pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.27JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialNetworkRoutePoolSize
OBJECT-TYPE
Obsolete initial size of the network-route pool in entries. One entry is allocated from the network-route pool for each network route in the BGP RIB.
1.3.6.1.4.1.4874.2.2.29.1.20.28JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxNetworkRoutePoolSize
OBJECT-TYPE
Obsolete maximum size of the network-route pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.29JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialRedistributedRoutePoolSize
OBJECT-TYPE
Obsolete initial size of the redistributed-route pool in entries. One entry is allocated from the redistributed-route pool for each redistributed route in the BGP RIB.
1.3.6.1.4.1.4874.2.2.29.1.20.30JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxRedistributedRoutePoolSize
OBJECT-TYPE
Obsolete maximum size of the redistributed-route pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.31JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialAggregateRoutePoolSize
OBJECT-TYPE
Obsolete initial size of the aggregate-route pool in entries. One entry is allocated from the aggregate-route pool for each aggregate route in the BGP RIB.
1.3.6.1.4.1.4874.2.2.29.1.20.32JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxAggregateRoutePoolSize
OBJECT-TYPE
Obsolete maximum size of the aggregate-route pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.33JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialAutoSummaryRoutePoolSize
OBJECT-TYPE
Obsolete initial size of the auto-summary-route pool in entries. One entry is allocated from the auto-summary-route pool for each auto-summary route in the BGP RIB.
1.3.6.1.4.1.4874.2.2.29.1.20.34JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxAutoSummaryRoutePoolSize
OBJECT-TYPE
Obsolete maximum size of the auto-summary-route pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.35JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialHistoryRoutePoolSize
OBJECT-TYPE
Obsolete object is obsolete. Setting it has not effect and reading this object returns an undefined value.
1.3.6.1.4.1.4874.2.2.29.1.20.36JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxHistoryRoutePoolSize
OBJECT-TYPE
Obsolete object is obsolete. Setting it has not effect and reading this object returns an undefined value.
1.3.6.1.4.1.4874.2.2.29.1.20.37JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialSendQueueEntryPoolSize
OBJECT-TYPE
Obsolete initial size of the send-queue-entry pool in entries. One entry is allocated from the send-queue-entry pool for update messages which is queued for transmission to a peer.
1.3.6.1.4.1.4874.2.2.29.1.20.38JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxSendQueueEntryPoolSize
OBJECT-TYPE
Obsolete maximum size of the send-queue-entry pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.39JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialVpnRoutePoolSize
OBJECT-TYPE
Obsolete initial size of the vpn-route pool in entries. One entry is allocated from the vpn-route pool for each received VPN route in the BGP RIB.
1.3.6.1.4.1.4874.2.2.29.1.20.40JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxVpnRoutePoolSize
OBJECT-TYPE
Obsolete maximum size of the vpn-route pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.41JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageInitialRouteTargetPoolSize
OBJECT-TYPE
Obsolete initial size of the route-target pool in entries. One entry is allocated from the route-target pool for each route-target imported in any VRF used by BGP.
1.3.6.1.4.1.4874.2.2.29.1.20.42JuniBgpStorageIntegerread-writeobsolete
juniBgpStorageMaxRouteTargetPoolSize
OBJECT-TYPE
Obsolete maximum size of the route-target pool in entries.
1.3.6.1.4.1.4874.2.2.29.1.20.43JuniBgpStorageIntegerread-writeobsolete
juniBgpRouteExtendedCommunityTable
OBJECT-TYPE
The obsolete BGP-4 Path Extended Community Table contained information about communities within destination networks received from all BGP4 peers. This table has been replaced by the juniBgpNewRouteExtendedCommunityTable.
1.3.6.1.4.1.4874.2.2.29.1.22not-accessibleobsolete
juniBgpRouteExtendedCommunityEntry
OBJECT-TYPE
Extended Community attribute information within a path to a network.
1.3.6.1.4.1.4874.2.2.29.1.22.1not-accessibleobsolete
juniBgpRouteExtendedCommunityNumber
OBJECT-TYPE
The extended community number.
1.3.6.1.4.1.4874.2.2.29.1.22.1.1OCTET STRING (SIZE(8))read-onlyobsolete
juniBgpNewRouteTable
OBJECT-TYPE
The BGP-4 Received Path Attribute Table contains additional information about paths to destination networks received from all BGP4 peers.
1.3.6.1.4.1.4874.2.2.29.1.23not-accessiblecurrent
juniBgpNewRouteEntry
OBJECT-TYPE
Additional information about a path to a network.
1.3.6.1.4.1.4874.2.2.29.1.23.1not-accessiblecurrent
juniBgpNewRouteVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this route is present. The empty string indicates that this route is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.23.1.1JuniVrfNamenot-accessiblecurrent
juniBgpNewRouteAfi
OBJECT-TYPE
The AFI of the address-family in which this route is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.2JuniBgpAfinot-accessiblecurrent
juniBgpNewRouteSafi
OBJECT-TYPE
The SAFI of the address-family in which this route is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.3JuniBgpSafinot-accessiblecurrent
juniBgpNewRouteIpAddrPrefix
OBJECT-TYPE
The IP address prefix of the route. This object is an IP address containing the prefix with length specified by juniBgpNewRouteIpAddrPrefixLen. Any bits beyond the length specified by juniBgpNewRouteIpAddrPrefixLen are zeroed.
1.3.6.1.4.1.4874.2.2.29.1.23.1.4IpAddressnot-accessiblecurrent
juniBgpNewRouteIpAddrPrefixLen
OBJECT-TYPE
Length in bits of the IP address prefix of the route.
1.3.6.1.4.1.4874.2.2.29.1.23.1.5Integer32 (0..32)not-accessiblecurrent
juniBgpNewRouteDistinguisher
OBJECT-TYPE
The Route Distinguisher (RD) of the route. This object has an undefined value for non-VPN routes.
1.3.6.1.4.1.4874.2.2.29.1.23.1.6OCTET STRING (SIZE(8))not-accessiblecurrent
juniBgpNewRoutePeer
OBJECT-TYPE
The IP address of the peer from which the route was received. This object has value 0.0.0.0 is the route was a locally originated route.
1.3.6.1.4.1.4874.2.2.29.1.23.1.7IpAddressnot-accessiblecurrent
juniBgpNewRouteRouteType
OBJECT-TYPE
The type of the route.
1.3.6.1.4.1.4874.2.2.29.1.23.1.8INTEGER {routeTypeReceived(1), routeTypeNetwork(2), routeTypeRedistributed(3), routeTypeAggregate(4), routeTypeAutoSummary(5)}not-accessiblecurrent
juniBgpNewRouteOriginalRd
OBJECT-TYPE
The original Route Distinguisher (RD) of a VPN route. For VPN routes which are originated in a VRF or which are received from a CE the original RD is equal to the RD of the VRF. For VPN routes which are received from another PE and imported into a VRF, the original RD is the RD which was received from the other PE (the RD of the route itself is changed to the RD for the VRF when the route is imported into the VRF). For non-VPN routes the value of this object is undefined.
1.3.6.1.4.1.4874.2.2.29.1.23.1.9OCTET STRING (SIZE(8))not-accessiblecurrent
juniBgpNewRouteOriginatorId
OBJECT-TYPE
The Originator-ID path attribute of the route if present. The juniBgpNewRouteOriginatorIdPresent object indicates whether the Originator-ID path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.10IpAddressread-onlycurrent
juniBgpNewRouteAtomicAggregatePresent
OBJECT-TYPE
Atomic-Aggregate path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.11TruthValueread-onlycurrent
juniBgpNewRouteMedPresent
OBJECT-TYPE
The Multi-Exit-Discriminator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.12TruthValueread-onlycurrent
juniBgpNewRouteLocalPrefPresent
OBJECT-TYPE
The Local-Pref path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.13TruthValueread-onlycurrent
juniBgpNewRouteAggregatorPresent
OBJECT-TYPE
The Aggregator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.14TruthValueread-onlycurrent
juniBgpNewRouteCommunitiesPresent
OBJECT-TYPE
The Communities path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.15TruthValueread-onlycurrent
juniBgpNewRouteOriginatorIdPresent
OBJECT-TYPE
The Originator-ID path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.16TruthValueread-onlycurrent
juniBgpNewRouteClusterListPresent
OBJECT-TYPE
The Cluster-List path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.17TruthValueread-onlycurrent
juniBgpNewRouteWeight
OBJECT-TYPE
The weight of the route.
1.3.6.1.4.1.4874.2.2.29.1.23.1.18Unsigned32read-onlycurrent
juniBgpNewRouteOrigin
OBJECT-TYPE
The value of the Origin path attribute.
1.3.6.1.4.1.4874.2.2.29.1.23.1.19INTEGER {igp(1), egp(2), incomplete(3)}read-onlycurrent
juniBgpNewRouteASPathSegment
OBJECT-TYPE
The value of the AS-path path attribute (as encoded in the received update message).
1.3.6.1.4.1.4874.2.2.29.1.23.1.20OCTET STRING (SIZE(2..255))read-onlycurrent
juniBgpNewRouteNextHop
OBJECT-TYPE
The value of the Next-Hop path attribute.
1.3.6.1.4.1.4874.2.2.29.1.23.1.21IpAddressread-onlycurrent
juniBgpNewRouteMultiExitDisc
OBJECT-TYPE
The value of the Multi-Exit-Discriminator path attribute if present. The juniBgpNewRouteMedPresent object indicates whether the Multi-Exit-Discriminator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.22Unsigned32read-onlycurrent
juniBgpNewRouteLocalPref
OBJECT-TYPE
The value of the Local-Pref path attribute if present. The juniBgpNewRouteLocalPrefPresent object indicates whether the Local-Pref path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.23Unsigned32read-onlycurrent
juniBgpNewRouteAtomicAggregate
OBJECT-TYPE
Whether or not the local system has selected a less specific route without selecting a more specific route.
1.3.6.1.4.1.4874.2.2.29.1.23.1.24INTEGER {lessSpecificRouteNotSelected(1), lessSpecificRouteSelected(2)}read-onlycurrent
juniBgpNewRouteAggregatorAS
OBJECT-TYPE
The value of the AS field in the Aggregator path attribute if present. The juniBgpNewRouteAggregatorPresent object indicates whether the Aggregator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.25Integer32 (0..65535)read-onlycurrent
juniBgpNewRouteAggregatorAddress
OBJECT-TYPE
The value of the address field in the Aggregator path attribute if present. The juniBgpNewRouteAggregatorPresent object indicates whether the Aggregator path attribute is present.
1.3.6.1.4.1.4874.2.2.29.1.23.1.26IpAddressread-onlycurrent
juniBgpNewRouteBestInIpRouteTable
OBJECT-TYPE
When BGP places a routes in the IP route table, that route may not be used for forwarding traffic if there are other routes (e.g. IGP routes or static routes) to that same prefix with a better administrative distance in the IP route table. This object indicates whether or not the BGP route in the IP route table is the best route (and hence is used for forwarding traffic).
1.3.6.1.4.1.4874.2.2.29.1.23.1.27TruthValueread-onlycurrent
juniBgpNewRouteUnknown
OBJECT-TYPE
One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
1.3.6.1.4.1.4874.2.2.29.1.23.1.28OCTET STRING (SIZE(0..255))read-onlycurrent
juniBgpNewRouteExtendedCommunitiesPresent
OBJECT-TYPE
Is the Extended-Communities path attribute present?
1.3.6.1.4.1.4874.2.2.29.1.23.1.29TruthValueread-onlycurrent
juniBgpNewRouteValid
OBJECT-TYPE
Is the route valid? The route is declared invalid if there is something wrong with it which is not serious enough for sending a notification, but it serious enough for not placing it in the IP route table or propagating it to other peers (for example the next-hop of the route is a local address).
1.3.6.1.4.1.4874.2.2.29.1.23.1.30TruthValueread-onlycurrent
juniBgpNewRouteSuppressedBy
OBJECT-TYPE
Indicates whether or not the route is suppressed, and if so why: suppressedByNothing - Route is not suppressed. suppressedByAggregate - Route is suppressed by a summary-only aggregate. suppressedByAutoSummary - Route is suppressed by an auto-summary. suppressedByDampening - Route is suppressed as a result of route-flap dampening.
1.3.6.1.4.1.4874.2.2.29.1.23.1.31INTEGER {suppressedByNothing(1), suppressedByAggregate(2), suppressedByAutoSummary(3), suppressedByDampening(4)}read-onlycurrent
juniBgpNewRouteNextHopReachable
OBJECT-TYPE
Is the indirect next-hop of the route reachable (i.e. can the indirect next-hop of the route be resolved to at least one direct next-hop)?
1.3.6.1.4.1.4874.2.2.29.1.23.1.32TruthValueread-onlycurrent
juniBgpNewRouteSynchronizedWithIgp
OBJECT-TYPE
Is the route is synchronized (i.e. is there is an IGP route to the same prefix in the IP route table)?
1.3.6.1.4.1.4874.2.2.29.1.23.1.33TruthValueread-onlycurrent
juniBgpNewRoutePlaceInIpRouteTable
OBJECT-TYPE
Has a BGP route for this prefix been placed in the IP route table?
1.3.6.1.4.1.4874.2.2.29.1.23.1.34TruthValueread-onlycurrent
juniBgpNewRouteAdvertiseToExternalPeers
OBJECT-TYPE
Should this route be advertised to external peers?
1.3.6.1.4.1.4874.2.2.29.1.23.1.35TruthValueread-onlycurrent
juniBgpNewRouteAdvertiseToInternalPeers
OBJECT-TYPE
Should this route be advertised to internal peers?
1.3.6.1.4.1.4874.2.2.29.1.23.1.36TruthValueread-onlycurrent
juniBgpNewRouteMplsLabel
OBJECT-TYPE
The obsolete MPLS label for the route. This object was obsoleted when in-label and out-label were introduced.
1.3.6.1.4.1.4874.2.2.29.1.23.1.37Unsigned32read-onlyobsolete
juniBgpNewRouteNextHopMetric
OBJECT-TYPE
The metric of direct next-hop of this BGP route.
1.3.6.1.4.1.4874.2.2.29.1.23.1.38Unsigned32read-onlycurrent
juniBgpNewRouteMplsInLabel
OBJECT-TYPE
The MPLS in-label for the route. This is the label that MPLS frames are going to be received with.
1.3.6.1.4.1.4874.2.2.29.1.23.1.39Unsigned32read-onlycurrent
juniBgpNewRouteMplsOutLabel
OBJECT-TYPE
The MPLS out-label for the route. This is the label that MPLS frames are going to be sent with.
1.3.6.1.4.1.4874.2.2.29.1.23.1.40Unsigned32read-onlycurrent
juniBgpNewRouteLeaked
OBJECT-TYPE
Is the route leaked into this address-family from another address- family?
1.3.6.1.4.1.4874.2.2.29.1.23.1.41TruthValueread-onlycurrent
juniBgpNewRouteStale
OBJECT-TYPE
Is the route stale?
1.3.6.1.4.1.4874.2.2.29.1.23.1.42TruthValueread-onlycurrent
juniBgpNewRouteFlapHistoryTable
OBJECT-TYPE
The BGP Route Flap History Table contains information about recorded route flap events.
1.3.6.1.4.1.4874.2.2.29.1.24not-accessiblecurrent
juniBgpNewRouteFlapHistoryEntry
OBJECT-TYPE
An instance in the list of route flap events.
1.3.6.1.4.1.4874.2.2.29.1.24.1not-accessiblecurrent
juniBgpNewRouteFlapState
OBJECT-TYPE
Current state: stateAvailable(1) - indicates path is available stateSuppressedReachable(2) - indicates path is suppressed, destination is reachable stateSuppressedUnreachable(3) - indicates path in suppressed, destination is not reachable
1.3.6.1.4.1.4874.2.2.29.1.24.1.1INTEGER {stateAvailable(1), stateSuppressedReachable(2), stateSuppressedUnreachable(3)}read-onlycurrent
juniBgpNewRouteFlapFigureOfMerit
OBJECT-TYPE
Calculated figure-of-merit.
1.3.6.1.4.1.4874.2.2.29.1.24.1.2Unsigned32read-onlycurrent
juniBgpNewRouteFlapRemainingTime
OBJECT-TYPE
Number of seconds until reuse or removal.
1.3.6.1.4.1.4874.2.2.29.1.24.1.3Unsigned32read-onlycurrent
juniBgpNewRouteFlapSuppressThreshold
OBJECT-TYPE
Damping cutoff threshold (scaled).
1.3.6.1.4.1.4874.2.2.29.1.24.1.4Unsigned32read-onlycurrent
juniBgpNewRouteFlapReuseThreshold
OBJECT-TYPE
Damping reuse threshold (scaled).
1.3.6.1.4.1.4874.2.2.29.1.24.1.5Unsigned32read-onlycurrent
juniBgpNewRouteFlapMaxHoldDownTime
OBJECT-TYPE
Maximum route holddown time (seconds).
1.3.6.1.4.1.4874.2.2.29.1.24.1.6Unsigned32read-onlycurrent
juniBgpNewRouteFlapHalfLifeReachable
OBJECT-TYPE
Figure of merit half life for reachable routes (seconds).
1.3.6.1.4.1.4874.2.2.29.1.24.1.7Unsigned32read-onlycurrent
juniBgpNewRouteFlapHalfLifeUnreachable
OBJECT-TYPE
Figure of merit half life for unreachable routes (seconds).
1.3.6.1.4.1.4874.2.2.29.1.24.1.8Unsigned32read-onlycurrent
juniBgpNewRouteCommunityTable
OBJECT-TYPE
The BGP-4 Path Community Table contains information about communities within destination networks received from all BGP4 peers.
1.3.6.1.4.1.4874.2.2.29.1.25not-accessiblecurrent
juniBgpNewRouteCommunityEntry
OBJECT-TYPE
Community attribute information within a path to a network.
1.3.6.1.4.1.4874.2.2.29.1.25.1not-accessiblecurrent
juniBgpNewRouteCommunityNumber
OBJECT-TYPE
The community number.
1.3.6.1.4.1.4874.2.2.29.1.25.1.1Unsigned32read-onlycurrent
juniBgpNewRouteExtendedCommunityTable
OBJECT-TYPE
The BGP-4 Path Extended Community Table contains information about communities within destination networks received from all BGP4 peers.
1.3.6.1.4.1.4874.2.2.29.1.26not-accessiblecurrent
juniBgpNewRouteExtendedCommunityEntry
OBJECT-TYPE
Extended Community attribute information within a path to a network.
1.3.6.1.4.1.4874.2.2.29.1.26.1not-accessiblecurrent
juniBgpNewRouteExtendedCommunityNumber
OBJECT-TYPE
The extended community number.
1.3.6.1.4.1.4874.2.2.29.1.26.1.1OCTET STRING (SIZE(8))read-onlycurrent
juniBgpNewRouteClusterIdTable
OBJECT-TYPE
The BGP-4 Path ClusterId Table contains information about router reflector cluster IDs.
1.3.6.1.4.1.4874.2.2.29.1.27not-accessiblecurrent
juniBgpNewRouteClusterIdEntry
OBJECT-TYPE
ClusterId attribute information within a path to a network.
1.3.6.1.4.1.4874.2.2.29.1.27.1not-accessiblecurrent
juniBgpNewRouteClusterId
OBJECT-TYPE
The cluster ID.
1.3.6.1.4.1.4874.2.2.29.1.27.1.1Unsigned32read-onlycurrent
juniBgpFourOctetConfederationPeerTable
OBJECT-TYPE
The BGP New Confederation Peer Table describes the BGP-specific characteristics of confederation peers using four-octet AS-numbers.
1.3.6.1.4.1.4874.2.2.29.1.28not-accessiblecurrent
juniBgpFourOctetConfederationPeerEntry
OBJECT-TYPE
The BGP New Confederation Peer Entry describes BGP-specific characteristics of one confederation peer using four-octet AS-numbers.
1.3.6.1.4.1.4874.2.2.29.1.28.1not-accessiblecurrent
juniBgpFourOctetConfederationPeerAsNumber
OBJECT-TYPE
The four-octet AS-number of this confederation peer.
1.3.6.1.4.1.4874.2.2.29.1.28.1.1JuniBgpFourOctetAsNumbernot-accessiblecurrent
juniBgpFourOctetConfederationPeerRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
1.3.6.1.4.1.4874.2.2.29.1.28.1.2RowStatusread-createcurrent
juniBgpPeerDynamicCapabilityTable
OBJECT-TYPE
The BGP PeerDynamicCapbility Table describes which dynamic capbilities we proposed to the peer, which the peer proposed to us, and which are being used.
1.3.6.1.4.1.4874.2.2.29.1.29not-accessiblecurrent
juniBgpPeerDynamicCapabilityEntry
OBJECT-TYPE
The BGP PeerDynamicCapbility Entry describes one dynamic capability.
1.3.6.1.4.1.4874.2.2.29.1.29.1not-accessiblecurrent
juniBgpPeerDynamicCapabilityPeerVrfName
OBJECT-TYPE
The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
1.3.6.1.4.1.4874.2.2.29.1.29.1.1JuniVrfNamenot-accessiblecurrent
juniBgpPeerDynamicCapabilityPeerRemoteAddr
OBJECT-TYPE
The remote IP address of this entry's BGP peer.
1.3.6.1.4.1.4874.2.2.29.1.29.1.2IpAddressnot-accessiblecurrent
juniBgpPeerDynamicCapabilityCode
OBJECT-TYPE
The capability code for the dynamic capability.
1.3.6.1.4.1.4874.2.2.29.1.29.1.3Integer32 (0..255)not-accessiblecurrent
juniBgpPeerDynamicCapabilitySent
OBJECT-TYPE
Returns true if we advertised capability code juniBgpPeerDynamicCapabilityCode in the dynamic-capability-negotiation capability which we sent to this peer.
1.3.6.1.4.1.4874.2.2.29.1.29.1.4TruthValueread-onlycurrent
juniBgpPeerDynamicCapabilityReceived
OBJECT-TYPE
Returns true if the peer advertised capability code juniBgpPeerDynamicCapabilityCode in the dynamic-capability-negotiation capability which this peer sent to us.
1.3.6.1.4.1.4874.2.2.29.1.29.1.5TruthValueread-onlycurrent
juniBgpPeerAddressFamilyConditionalAdvTable
OBJECT-TYPE
The Juniper BGP Peer Address Family Conditional Advertisement Table describes the BGP conditional advertisement attributes in an Address Family for a peer.
1.3.6.1.4.1.4874.2.2.29.1.30not-accessiblecurrent
juniBgpPeerAddressFamilyConditionalAdvEntry
OBJECT-TYPE
The Juniper BGP Peer Address Family Conditional Advertisement Entry describes a specific conditional advertisement entry in Address Family for a peer.
1.3.6.1.4.1.4874.2.2.29.1.30.1not-accessiblecurrent
juniBgpPeerAddressFamilyConditionalAdvAdvertiseMap
OBJECT-TYPE
The route-map for conditional advertisement.
1.3.6.1.4.1.4874.2.2.29.1.30.1.1JuniBgpAdvertiseMapNamenot-accessiblecurrent
juniBgpPeerAddressFamilyConditionalAdvConditionMap
OBJECT-TYPE
The condition-map to apply for this conditional advertisement entry.
1.3.6.1.4.1.4874.2.2.29.1.30.1.2DisplayStringread-createcurrent
juniBgpPeerAddressFamilyConditionalAdvIsExistMap
OBJECT-TYPE
Set this value to true(1) if the condition-map specified should be applied as an exist-map. If the condition-map should be applied as a non-exist-map, set it to false(2).
1.3.6.1.4.1.4874.2.2.29.1.30.1.3TruthValueread-createcurrent
juniBgpPeerAddressFamilyConditionalAdvSequenceNum
OBJECT-TYPE
The sequence number of this conditional advertisement entry.
1.3.6.1.4.1.4874.2.2.29.1.30.1.4Integer32 (1..65535)read-createcurrent
juniBgpPeerAddressFamilyConditionalAdvStatus
OBJECT-TYPE
This value will be advertise(1) if the status of this advertise-map is evaluated as advertise based on the condition-map. Otherwise it is withdraw(2).
1.3.6.1.4.1.4874.2.2.29.1.30.1.5JuniBgpConditionalAdvStatusread-onlycurrent
juniBgpPeerAddressFamilyConditionalAdvRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo, destroy
1.3.6.1.4.1.4874.2.2.29.1.30.1.6RowStatusread-createcurrent
juniBgpPeerGroupAddressFamilyConditionalAdvTable
OBJECT-TYPE
The Juniper BGP Peer Group Address Family Conditional Advertisement Table describes the BGP conditional advertisement attributes in an Address Family for a peer-group.
1.3.6.1.4.1.4874.2.2.29.1.31not-accessiblecurrent
juniBgpPeerGroupAddressFamilyConditionalAdvEntry
OBJECT-TYPE
The Juniper BGP Peer Group Address Family Conditional Advertisement Entry describes a specific conditional advertisement entry in an Address Family for a peer-group.
1.3.6.1.4.1.4874.2.2.29.1.31.1not-accessiblecurrent
juniBgpPeerGroupAddressFamilyConditionalAdvAdvertiseMap
OBJECT-TYPE
The route-map for conditional advertisement.
1.3.6.1.4.1.4874.2.2.29.1.31.1.1JuniBgpAdvertiseMapNamenot-accessiblecurrent
juniBgpPeerGroupAddressFamilyConditionalAdvConditionMap
OBJECT-TYPE
The condition-map to apply for this conditional advertisement entry.
1.3.6.1.4.1.4874.2.2.29.1.31.1.2DisplayStringread-createcurrent
juniBgpPeerGroupAddressFamilyConditionalAdvIsExistMap
OBJECT-TYPE
Set this value to true(1) if the condition-map specified should be applied as an exist-map. If the condition-map should be applied as a non-exist-map, set it to false(2).
1.3.6.1.4.1.4874.2.2.29.1.31.1.3TruthValueread-createcurrent
juniBgpPeerGroupAddressFamilyConditionalAdvSequenceNum
OBJECT-TYPE
The sequence number of this conditional advertisement entry.
1.3.6.1.4.1.4874.2.2.29.1.31.1.4Integer32 (1..65535)read-createcurrent
juniBgpPeerGroupAddressFamilyConditionalAdvStatus
OBJECT-TYPE
This value will be advertise(1) if the status of this advertise-map is evaluated as advertise based on the condition-map. Otherwise it is withdraw(2).
1.3.6.1.4.1.4874.2.2.29.1.31.1.5JuniBgpConditionalAdvStatusread-onlycurrent
juniBgpPeerGroupAddressFamilyConditionalAdvRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo, destroy
1.3.6.1.4.1.4874.2.2.29.1.31.1.6RowStatusread-createcurrent
juniBgpConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.29.2
juniBgpCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.29.2.1
juniBgpConfGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.29.2.2

Conformance

NameOIDStatus
juniBgpCompliance
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when the juniBgpDefaultIPv4Unicast object was added to the general cofiguation group.
1.3.6.1.4.1.4874.2.2.29.2.1.1obsolete
juniBgpCompliance2
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when the original route destination was added as an index to each of the route configuration tables.
1.3.6.1.4.1.4874.2.2.29.2.1.2obsolete
juniBgpCompliance3
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when the peer and peer-group local-as support was added.
1.3.6.1.4.1.4874.2.2.29.2.1.3obsolete
juniBgpCompliance4
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support was added for adding unicast BGP routes into a multicast view.
1.3.6.1.4.1.4874.2.2.29.2.1.4obsolete
juniBgpCompliance5
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when the juniBgpRedistributeInternal object was added to the general configuration group and the history pool size objects were obsoleted and the ability to unconfigure BGP attributes from the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.1.5obsolete
juniBgpCompliance6
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support for four-octet AS-numbers, dynamic capability negotiation, iBGP multipath, confederation peers filter-list, and address family maximum prefix strict was added.
1.3.6.1.4.1.4874.2.2.29.2.1.6obsolete
juniBgpCompliance7
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support for advertise-best-external-to-internal was added.
1.3.6.1.4.1.4874.2.2.29.2.1.7obsolete
juniBgpCompliance8
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support for maximum-paths eiBGP and other features were added.
1.3.6.1.4.1.4874.2.2.29.2.1.8obsolete
juniBgpCompliance9
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support for send-label was added.
1.3.6.1.4.1.4874.2.2.29.2.1.9obsolete
juniBgpCompliance10
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support for a route-map for default-information originate and neighbor ... default-originate was added.
1.3.6.1.4.1.4874.2.2.29.2.1.10obsolete
juniBgpCompliance11
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when MIB support for graceful restart was added
1.3.6.1.4.1.4874.2.2.29.2.1.11obsolete
juniBgpCompliance12
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when BGP storage support was removed and when MIB support for next-hop-unchanged was added.
1.3.6.1.4.1.4874.2.2.29.2.1.12obsolete
juniBgpCompliance13
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support for BGP BFD was added.
1.3.6.1.4.1.4874.2.2.29.2.1.13obsolete
juniBgpCompliance14
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support for ibgp-singlehop was added.
1.3.6.1.4.1.4874.2.2.29.2.1.14obsolete
juniBgpCompliance15
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper BGP MIB. This statement became obsolete when support for conditional advertisement was added.
1.3.6.1.4.1.4874.2.2.29.2.1.15obsolete
juniBgpCompliance16
MODULE-COMPLIANCE
The compliance statement for entities which implement the Juniper BGP MIB.
1.3.6.1.4.1.4874.2.2.29.2.1.16current
juniBgpGeneralConfGroup
OBJECT-GROUP
Obsolete collection of objects providing general management of BGP in a Juniper product. This group became obsolete when the juniBgpDefaultIPv4Unicast object was added.
1.3.6.1.4.1.4874.2.2.29.2.2.1obsolete
juniBgpStatisticsConfGroup
OBJECT-GROUP
A collection of objects providing statistics of BGP operations in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.2current
juniBgpConfederationPeerConfGroup
OBJECT-GROUP
Deprecated object providing management of BGP-specific confederation peers in a Juniper product. This group became deprecated when support for four-octet AS-numbers was added.
1.3.6.1.4.1.4874.2.2.29.2.2.3deprecated
juniBgpPeerConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This group became obsolete when the juniBgpPeerLocalAsNumber object was added.
1.3.6.1.4.1.4874.2.2.29.2.2.4obsolete
juniBgpAfiSafiPeerConfGroup
OBJECT-GROUP
A collection of objects providing management of BGP-specific AFI and SAFI peers in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.5current
juniBgpPeerAddressFamilyConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer address families in a Juniper product. This group became obsolete when the ability to unconfigure attributes using the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.2.6obsolete
juniBgpPeerGroupConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer groups in a Juniper product. This group became obsolete when the juniBgpPeerGroupLocalAsNumber object was added.
1.3.6.1.4.1.4874.2.2.29.2.2.7obsolete
juniBgpPeerGroupAddressFamilyConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer group address families in a Juniper product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.2.8obsolete
juniBgpRouteConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP routes in a Juniper product. This group became obsolete when the original route destination was added as an index to each of the tables.
1.3.6.1.4.1.4874.2.2.29.2.2.9obsolete
juniBgpNetworkConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP networks in a Juniper product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.2.10obsolete
juniBgpAggregateConfGroup
OBJECT-GROUP
Obsolete collection of objects providing consolidation of BGP route information in a Juniper product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.2.11obsolete
juniBgpVrfConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Juniper product. This group became obsolete when the juniBgpVrfAddUnicastRoutesToMulticastView object was added.
1.3.6.1.4.1.4874.2.2.29.2.2.12obsolete
juniBgpAddressFamilyConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP address families in a Juniper product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.2.13obsolete
juniBgpStorageConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP characteristics in a Juniper product that will not take affect until reboot. This group became obsolete when the history pool size objects were obsoleted.
1.3.6.1.4.1.4874.2.2.29.2.2.14obsolete
juniBgpGeneralConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing general management in a Juniper product. This group became obsolete when the juniBgpRedistributeInternal object and unconfigure support were added.
1.3.6.1.4.1.4874.2.2.29.2.2.15obsolete
juniBgpNewRouteConfGroup
OBJECT-GROUP
Obsolete collection of objects providing management of BGP routes in a Juniper product. This group was obsoleted when label was replaced by in-label and out-label.
1.3.6.1.4.1.4874.2.2.29.2.2.16obsolete
juniBgpPeerConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This group became obsolete when the ability to unconfigure BGP attributes from the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.2.17obsolete
juniBgpPeerGroupConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer groups in a Juniper product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.2.18obsolete
juniBgpVrfConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Juniper product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
1.3.6.1.4.1.4874.2.2.29.2.2.19obsolete
juniBgpGeneralConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing general management of BGP in a Juniper product. This group became obsolete when four-octet AS-numbers and maximum-paths iBGP support was added.
1.3.6.1.4.1.4874.2.2.29.2.2.20obsolete
juniBgpStorageConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of BGP characteristics in a Juniper product that will not take affect until reboot. This group became obsolete when storage heap size objects were obsoleted.
1.3.6.1.4.1.4874.2.2.29.2.2.21obsolete
juniBgpPeerConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This groups was obsoleted when support for four octet AS numbers was added.
1.3.6.1.4.1.4874.2.2.29.2.2.22obsolete
juniBgpPeerAddressFamilyConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer address families in a Juniper product. This group was obsoleted when support for ORFs was added.
1.3.6.1.4.1.4874.2.2.29.2.2.23obsolete
juniBgpPeerGroupConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer groups in a Juniper product. This group was obsoleted when support for dynamic capability negotiation was added.
1.3.6.1.4.1.4874.2.2.29.2.2.24obsolete
juniBgpPeerGroupAddressFamilyConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer group address families in a Juniper product. This group was obsoleted when support for ORFs was added.
1.3.6.1.4.1.4874.2.2.29.2.2.25obsolete
juniBgpNetworkConfGroup2
OBJECT-GROUP
A collection of objects providing management of BGP networks in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.26current
juniBgpAggregateConfGroup2
OBJECT-GROUP
A collection of objects providing consolidation of BGP route information in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.27current
juniBgpVrfConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Juniper product. This group was obsoleted when support for iBGP multipath was added.
1.3.6.1.4.1.4874.2.2.29.2.2.28obsolete
juniBgpAddressFamilyConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of BGP address-family groups in a Juniper product. This group was obsoleted when support for administrative distance was added.
1.3.6.1.4.1.4874.2.2.29.2.2.29obsolete
juniBgpGeneralConfGroup4
OBJECT-GROUP
Obsolete collection of objects providing general management of BGP in a Juniper product. This group became obsolete when support for advertise-best-external-to-internal was added.
1.3.6.1.4.1.4874.2.2.29.2.2.30obsolete
juniBgpFourOctetConfederationPeerConfGroup
OBJECT-GROUP
An object providing management of BGP-specific confederation peers in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.31current
juniBgpPeerConfGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This group was obsoleted when support for site-of-origin was added.
1.3.6.1.4.1.4874.2.2.29.2.2.32obsolete
juniBgpPeerAddressFamilyConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer address families in a Juniper product. This group was obsoleted when support for send-label was added
1.3.6.1.4.1.4874.2.2.29.2.2.33obsolete
juniBgpPeerGroupConfGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer groups in a Juniper product. This group was obsoleted when support for site-of-origin was added.
1.3.6.1.4.1.4874.2.2.29.2.2.34obsolete
juniBgpPeerGroupAddressFamilyConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer group address families in a Juniper product. This group was obsoleted when support for send-label was added.
1.3.6.1.4.1.4874.2.2.29.2.2.35obsolete
juniBgpVrfConfGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Juniper product. This group was obsoleted when support for eiBGP multipath was added.
1.3.6.1.4.1.4874.2.2.29.2.2.36obsolete
juniBgpDeprecatedGroup
OBJECT-GROUP
A collection of deprecated objects that continue to be supported on some current Juniper products.
1.3.6.1.4.1.4874.2.2.29.2.2.37deprecated
juniBgpNewRouteConfGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of BGP routes in a Juniper product. This group was obsoleted when support for leaked flag attribute of the BGP route was added.
1.3.6.1.4.1.4874.2.2.29.2.2.38obsolete
juniBgpGeneralConfGroup5
OBJECT-GROUP
Obsolete collection of objects providing general management of BGP in a Juniper product. This group was obsoleted when MIB support for graceful restart was added.
1.3.6.1.4.1.4874.2.2.29.2.2.39obsolete
juniBgpPeerConfGroup5
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This group was obsoleted when support for the new dynamic capability negotiation draft was added.
1.3.6.1.4.1.4874.2.2.29.2.2.40obsolete
juniBgpPeerGroupConfGroup5
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer groups in a Juniper product. This group was obsoleted when support for the new dynamic capability negotiation draft was added.
1.3.6.1.4.1.4874.2.2.29.2.2.41obsolete
juniBgpVrfConfGroup5
OBJECT-GROUP
Obsolete collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Juniper product. This group was obsoleted when support for carrier's carrier was added.
1.3.6.1.4.1.4874.2.2.29.2.2.42obsolete
juniBgpAddressFamilyConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of BGP address families in a Juniper product. This group was obsoleted when support for check-vpn-next-hops was added.
1.3.6.1.4.1.4874.2.2.29.2.2.43obsolete
juniBgpStorageConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of BGP characteristics in a Juniper product that will not take affect until reboot. This group became obsolete when storage support objects were obsoleted.
1.3.6.1.4.1.4874.2.2.29.2.2.44obsolete
juniBgpNewRouteConfGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of BGP routes in a Juniper product. This group was obsoleted when MIB support for graceful restart was added.
1.3.6.1.4.1.4874.2.2.29.2.2.45obsolete
juniBgpPeerAddressFamilyConfGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer address families in a Juniper product. This group was obsoleted when support for a route-map for neighbor ... default-originate was added.
1.3.6.1.4.1.4874.2.2.29.2.2.46obsolete
juniBgpPeerGroupAddressFamilyConfGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer group address families in a Juniper product. This group was obsoleted when support for a route-map for neighbor ... default-originate was added.
1.3.6.1.4.1.4874.2.2.29.2.2.47obsolete
juniBgpVrfConfGroup6
OBJECT-GROUP
Obsolete collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Juniper product. This group was obsoleted when the BGP-specific carrier's carrier flag was removed.
1.3.6.1.4.1.4874.2.2.29.2.2.48obsolete
juniBgpAddressFamilyConfGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of BGP address families in a Juniper product. This group was obsoleted when support for the route-map option in default-information originate was added.
1.3.6.1.4.1.4874.2.2.29.2.2.49obsolete
juniBgpPeerAddressFamilyConfGroup5
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer address families in a Juniper product. This group was obsoleted when MIB support for graceful restart was added.
1.3.6.1.4.1.4874.2.2.29.2.2.50obsolete
juniBgpPeerGroupAddressFamilyConfGroup5
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer group address families in a Juniper product. This group was obsoleted when MIB support for next-hop-unchanged was added.
1.3.6.1.4.1.4874.2.2.29.2.2.51current
juniBgpAddressFamilyConfGroup5
OBJECT-GROUP
Obsolete collection of objects providing management of BGP address families in a Juniper product. This group was obsoleted when MIB support for graceful restart was added.
1.3.6.1.4.1.4874.2.2.29.2.2.52obsolete
juniBgpPeerConfGroup6
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This group was obsoleted when MIB support for graceful restart was added.
1.3.6.1.4.1.4874.2.2.29.2.2.53obsolete
juniBgpPeerGroupConfGroup6
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer groups in a Juniper product. This group was obsoleted when MIB support for graceful restart was added.
1.3.6.1.4.1.4874.2.2.29.2.2.54obsolete
juniBgpPeerDynamicCapabilityConfGroup
OBJECT-GROUP
A collection of objects providing management of BGP dynamic capability negotiation.
1.3.6.1.4.1.4874.2.2.29.2.2.55current
juniBgpGeneralConfGroup6
OBJECT-GROUP
A collection of objects providing general management of BGP in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.56current
juniBgpPeerConfGroup7
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This group was obsoleted when support for BFD was added.
1.3.6.1.4.1.4874.2.2.29.2.2.57obsolete
juniBgpPeerAddressFamilyConfGroup6
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer address families in a Juniper product. This group was obsoleted when MIB support for next-hop-unchanged was added.
1.3.6.1.4.1.4874.2.2.29.2.2.58obsolete
juniBgpPeerGroupConfGroup7
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peer groups in a Juniper product. This group was obsoleted when support for BFD was added.
1.3.6.1.4.1.4874.2.2.29.2.2.59obsolete
juniBgpNewRouteConfGroup4
OBJECT-GROUP
A collection of objects providing management of BGP routes in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.60current
juniBgpAddressFamilyConfGroup6
OBJECT-GROUP
Obsolete collection of objects providing management of BGP address families in a Juniper product. This group was obsoleted when BGP-created IP dynamic interface profile support has been removed.
1.3.6.1.4.1.4874.2.2.29.2.2.61obsolete
juniBgpVrfConfGroup7
OBJECT-GROUP
A collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.62current
juniBgpPeerAddressFamilyConfGroup7
OBJECT-GROUP
A collection of objects providing management of BGP peer address families in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.63current
juniBgpPeerGroupAddressFamilyConfGroup6
OBJECT-GROUP
A collection of objects providing management of BGP peer group address families in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.64current
juniBgpAddressFamilyConfGroup7
OBJECT-GROUP
A collection of objects providing management of BGP address families in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.65current
juniBgpPeerConfGroup8
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This group was obsoleted when support for ibgp-singlehop was added.
1.3.6.1.4.1.4874.2.2.29.2.2.66obsolete
juniBgpPeerGroupConfGroup8
OBJECT-GROUP
Obsolete collection of objects providing management of BGP peers in a Juniper product. This group was obsoleted when support for ibgp-singlehop was added.
1.3.6.1.4.1.4874.2.2.29.2.2.67current
juniBgpPeerConfGroup9
OBJECT-GROUP
A collection of objects providing management of BGP peers in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.68current
juniBgpPeerGroupConfGroup9
OBJECT-GROUP
A collection of objects providing management of BGP peer groups in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.69current
juniBgpPeerAddressFamilyConditionalAdvConfGroup
OBJECT-GROUP
A collection of objects providing management of BGP Conditional Advertisement for peers in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.70current
juniBgpPeerGroupAddressFamilyConditionalAdvConfGroup
OBJECT-GROUP
A collection of objects providing management of BGP Conditional Advertisement for peer groups in a Juniper product.
1.3.6.1.4.1.4874.2.2.29.2.2.71current