MIBs Depot

Juniper-AAA-MIB

Registered at
1.3.6.1.4.1.4874.2.2.20
Last updated
2008-10-24 09:16
Organization
Juniper Networks, Inc.
Revisions
2008-10-24 09:16, 2008-09-04 10:34, 2008-06-11 05:33, 2007-12-27 09:44, 2007-10-04 01:33, 2007-07-31 19:34, 2006-08-02 18:34, 2006-07-11 13:05, 2006-08-02 13:33, 2006-02-21 15:54, 2005-01-31 22:01, 2004-12-03 22:12, 2004-05-20 21:33, 2004-07-26 17:02, 2003-05-07 18:07, 2003-05-05 20:25, 2003-04-29 14:09, 2003-04-25 16:03, 2002-08-01 19:50, 2001-10-05 13:25, 2001-10-03 19:05, 2001-03-01 17:03, 2001-02-12 19:54, 2000-05-18 00:00, 1999-06-01 00:00
Namespace
juniper
Source file
Juniper-AAA-MIB
Digest
sha256:da6360fde864f4373f53f154aced525d7f1afac6d1a202e8fcab96d5a727ee2c

Description

The Authentication, Authorization and Accounting (AAA) MIB for the Juniper Networks enterprise.

Contact

Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net

Imports

FromSymbols
IPV6-TCIpv6Address, Ipv6AddressIfIdentifier, Ipv6AddressPrefix
Juniper-MIBsjuniMibs
Juniper-ROUTER-MIBjuniRouterIndex
Juniper-TCJuniEnable, JuniInterfaceLocationType, JuniInterfaceLocationValue, JuniName, JuniVrfGroupName
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IPV6-TC
Juniper-AAA-MIB
Juniper-IP-POLICY-MIB
Juniper-MIBs
Juniper-ROUTER-MIB
Juniper-TC
Juniper-UNI-SMI
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JuniAaaAccountingMethods
TEXTUAL-CONVENTION
The set of configurable accounting choices.
current
JuniAaaAccountingSubscriberTypes
TEXTUAL-CONVENTION
The set of accounting subscriber types. The maximum enumerated type will never be greater than 255.
current
JuniAaaAuthenticationMethods
TEXTUAL-CONVENTION
The set of configurable authentication choices. The maximum enumerated type will never be greater than 255.
current
JuniAaaAuthenticationSubscriberTypes
TEXTUAL-CONVENTION
The set of authentication subscriber types. The maximum enumerated type will never be greater than 255.
current
JuniAaaDomainName
TEXTUAL-CONVENTION
The name of an internet domain. Represents textual information taken from the NVT ASCII character set.
current
JuniAaaTunnelGroupName
TEXTUAL-CONVENTION
The name of a tunnel group. Represents textual information taken from the NVT ASCII character set.
current
JuniAaaTunnelSwitchProfileName
TEXTUAL-CONVENTION
The name of a tunnel switch profile. Represents textual information taken from the NVT ASCII character set.
current
JuniAddressAssignType
TEXTUAL-CONVENTION
The set of possible AAA address assignment sources.
current
JuniSubscriberClientType
TEXTUAL-CONVENTION
The set of possible AAA subscriber client types: ppp PPP client login Command line interface or SSH ip IP-based application config Locally configured client identity tunnel Tunnel e.g. L2TP other Unspecified client type
current
JuniSubscriberInterfaceValue
TEXTUAL-CONVENTION
Value of the sub-interface, represented as an OCTET STRING.
current
JuniSubscriberLocationType
TEXTUAL-CONVENTION
Obsolete description of the platform-dependent interpretation of a JuniAtmLocationValue object. This textual convention has been relpaced by Juniper-TC.JuniInterfaceLocationType.
obsolete
JuniSubscriberLocationValue
TEXTUAL-CONVENTION
Obsolete value of a platform-dependent interface location, represented as an OCTET STRING. A corresponding JuniAtmLocationType object identified the mapping of octets to location elements, e.g. 'slot.port'. This textual convention has been replaced by Juniper-TC.JuniInterfaceLocationValue.
obsolete
JuniSubscriberState
TEXTUAL-CONVENTION
The set of possible AAA subscriber states, expressed as a bit map: init Initial state (transient) pending Auth/Acct or Addr Request is pending established Subscriber is authenticated deleting Deletion of subscriber is pending tunneling Subscriber is being tunneled tunnelAcct Tunnel accounting is enabled terminated Subscriber has been terminated counted Subscriber has been counted in statistics clientHandleSet Client handle is assigned to user profile sentAcctStart Start accounting record is requested More than one state bit can be active simultaneously. If no bits are set, the subscriber is in a transient initial state.
current

Objects

NameOIDSyntaxAccessStatus
juniAaaObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1
juniAaaAssignment
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.1
juniAaaAssignGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.1.1
juniAaaAssignBrasLicense
OBJECT-TYPE
The license string that determines the system-wide maximum number of remote user connections allowed. A zero-length string (no license) prohibits remote user connections.
1.3.6.1.4.1.4874.2.2.20.1.1.1.1DisplayString (SIZE(0..16))read-writecurrent
juniAaaAssignBrasLicensedUsers
OBJECT-TYPE
The system-wide maximum number of remote user connections allowed by the currently configured license string.
1.3.6.1.4.1.4874.2.2.20.1.1.1.2Integer32read-onlycurrent
juniAaaAssignDomainDelimiters
OBJECT-TYPE
The list of delimiters used to separate the user's name from the user's domain in the username field. The default is '@'.
1.3.6.1.4.1.4874.2.2.20.1.1.1.3DisplayString (SIZE(0..8))read-writecurrent
juniAaaAssignRealmDelimiters
OBJECT-TYPE
The list of delimiters used to separate the user's name from the user's realm in the username field. The realm is treated like the domain in the ERX. The default is none.
1.3.6.1.4.1.4874.2.2.20.1.1.1.4DisplayString (SIZE(0..8))read-writecurrent
juniAaaAssignDomainParseOrder
OBJECT-TYPE
The order in which the user's name is parsed: either search for domain first or realm first in the form (realm/user@domain.com). The default is domain first.
1.3.6.1.4.1.4874.2.2.20.1.1.1.5INTEGER {domainFirst(1), realmFirst(2)}read-writecurrent
juniAaaAssignSubscriberLimit
OBJECT-TYPE
The maximum number of subscribers permitted in this VR context. The value '0' means no limit.
1.3.6.1.4.1.4874.2.2.20.1.1.1.6Integer32 (0..32000)read-writecurrent
juniAaaAssignDomainMaxPadnPerDomain
OBJECT-TYPE
The maximum number of PPPoE active discovery network (PADN) entries permitted in a domain entry.
1.3.6.1.4.1.4874.2.2.20.1.1.1.7Unsigned32read-onlycurrent
juniAaaInterfaceIdFormat
OBJECT-TYPE
The interface ID format: include or exclude sub-interface per VR. The sub-interface is included or excluded at the time of the initial AAA request for the user and remains for the duration of the login.
1.3.6.1.4.1.4874.2.2.20.1.1.1.8INTEGER {includeSubIntf(1), excludeSubIntf(2)}read-writecurrent
juniAaaAssignTunnelCallingNumberFormat
OBJECT-TYPE
The format of the interface identifier passed to L2TP during an authentication request. L2TP uses this identifier as the calling-number (type 22) attribute value. Note: if selected components of the calling number format are not available (i.e. PPPoE Agent Circuit Id and Agent Remote Id), then the juniAaaAssignTunnelCallingNumberFallbackFormat will be used. Optionally the SVLAN ID inclusion can be enabled
1.3.6.1.4.1.4874.2.2.20.1.1.1.9INTEGER {descriptive(1), fixed(2), descriptiveIncludeAgentCircuitId(3), descriptiveIncludeAgentRemoteId(4), descriptiveIncludeAgentCircuitIdAndAgentRemoteId(5), agentCircuitId(6), agentRemoteId(7), agentCircuitIdIncludeAgentRemoteId(8), fixedIncludeSvlanId(9), fixedAdapterEmbedded(10), fixedAdapterNewField(11), fixedAdapterEmbeddedIncludeSvlanId(12), fixedAdapterNewFieldIncludeSvlanId(13)}read-writecurrent
juniAaaAssignDomainParseDirection
OBJECT-TYPE
The direction in which the user's name is parsed: either search for domain delimiter from left to right or right to left; first delimiter marks boundry. The default is right to left.
1.3.6.1.4.1.4874.2.2.20.1.1.1.10INTEGER {rightToLeft(1), leftToRight(2)}read-writecurrent
juniAaaAssignRealmParseDirection
OBJECT-TYPE
The direction in which the user's name is parsed: either search for realm delimiter from left to right or right to left; first delimiter marks boundry. The default is left to right.
1.3.6.1.4.1.4874.2.2.20.1.1.1.11INTEGER {rightToLeft(1), leftToRight(2)}read-writecurrent
juniAaaInterfaceAdapterFormat
OBJECT-TYPE
The interface adapter format: include or exclude the adapter if present field per VR. The adapter field is included or excluded at the time of the initial AAA request for the user and remains for the duration of the login.
1.3.6.1.4.1.4874.2.2.20.1.1.1.12INTEGER {includeAdapter(1), excludeAdapter(2)}read-writecurrent
juniAaaAssignAccountingStatisticsType
OBJECT-TYPE
The method for collecting AAA acounting statistics. When value is 'full', collect a full set of statistics for AAA accounting. When the value is 'uptime', collect only uptime value for AAA accounting.
1.3.6.1.4.1.4874.2.2.20.1.1.1.13INTEGER {full(0), uptime(1)}read-writecurrent
juniAaaAssignQosDownstreamRate
OBJECT-TYPE
Enables/disables the reporting of the dsl downstream rate information to Qos.
1.3.6.1.4.1.4874.2.2.20.1.1.1.14JuniEnableread-writecurrent
juniAaaAssignTunnelCallingNumberFormatFallback
OBJECT-TYPE
The fallback format of the interface identifier passed to L2TP during an authentication request. L2TP uses this identifier as the calling-number (type 22) attribute value.
1.3.6.1.4.1.4874.2.2.20.1.1.1.15INTEGER {descriptive(1), fixed(2), fixedIncludeSvlanId(3), fixedAdapterEmbedded(4), fixedAdapterNewField(5), fixedAdapterEmbeddedIncludeSvlanId(6), fixedAdapterNewFieldIncludeSvlanId(7)}read-writecurrent
juniAaaFramedIpv6PrefixAsIpv6NdRaPrefix
OBJECT-TYPE
Enables/disables the use of framed-ipv6-prefix RADIUS attribute for IPv6 ND router advertisement.
1.3.6.1.4.1.4874.2.2.20.1.1.1.16TruthValueread-writecurrent
juniAaaDelegatedIpv6PrefixAsDhcpv6DelegatedPrefix
OBJECT-TYPE
Enables/disables the use of delegated-ipv6-prefix RADIUS attribute for DHCPv6 prefix delegation.
1.3.6.1.4.1.4874.2.2.20.1.1.1.17TruthValueread-writecurrent
juniAaaAssignDomain
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.1.2
juniAaaAssignDomainTable
OBJECT-TYPE
The entries in this table specify the assignment of a remote access user to a virtual router, based on the user's domain.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1not-accessiblecurrent
juniAaaAssignDomainEntry
OBJECT-TYPE
A specification of the virtual router to which users on a specified domain should be assigned.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1not-accessiblecurrent
juniAaaAssignDomainName
OBJECT-TYPE
The domain name uniquely identifying this entry.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.1JuniAaaDomainNameread-onlycurrent
juniAaaAssignDomainRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.2RowStatusread-createcurrent
juniAaaAssignDomainRouterName
OBJECT-TYPE
This variable is replaced by juniAaaAssignDomainAuthRouterName and juniAaaAssignDomainIpRouterName. It returns same value as juniAaaAssignDomainAuthRouterName.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.3JuniNameread-onlydeprecated
juniAaaAssignDomainLoopback
OBJECT-TYPE
The number of the loopback interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remote access user links. For example, if the associated loopback interface for this domain/router was configured via the console as 'loopback 2', this object would contain the integer value 2. A value of -1 indicates the loopback interface is unspecified.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.4Integer32 (-1..32000)read-createobsolete
juniAaaAssignDomainIpHint
OBJECT-TYPE
Enables/disables the IP hint feature, which causes the system to allocate an IP address before going to RADIUS for authentication.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.5TruthValueread-createcurrent
juniAaaAssignDomainAtmServiceLevel
OBJECT-TYPE
The Service category for this circuit: ubr Unspecified bit rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-realtime Variable Bit Rate. cbr Constant bit rate. rtVbr Realtime Variable Bit Rate. Set the service level in combination of the traffic attributes PCR/SCR/MBS in the following matrix for successfull configurations. ServiceLevel PCR SCR MBS ------------------------------------------ ubr omit omit omit ubrPcr must omit omit nrtVbr must must must cbr must omit omit rtVbr must must must
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.6INTEGER {none(0), ubr(1), ubrPcr(2), nrtVbr(3), cbr(4), rtVbr(5)}read-createcurrent
juniAaaAssignDomainAtmPcr
OBJECT-TYPE
Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAaaAssignDomainAtmServiceLevel is configured to have one of the following values: ubrPcr nrtVbr cbr
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.7Unsigned32 (0..4294967294)read-createcurrent
juniAaaAssignDomainAtmScr
OBJECT-TYPE
Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAaaAssignDomainAtmServiceLevel is configured to have one of the following values: nrtVbr
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.8Unsigned32 (0..4294967294)read-createcurrent
juniAaaAssignDomainAtmMbs
OBJECT-TYPE
Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAaaAssugbDomainAtmServiceLevel is configured to have one of the following values: nrtVbr
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.9Unsigned32 (0..4294967294)read-createcurrent
juniAaaAssignDomainOverrideUserName
OBJECT-TYPE
The override user name associated with this entry. This object is used to override the user name of the remote client.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.10DisplayString (SIZE(0..32))read-createcurrent
juniAaaAssignDomainOverridePassword
OBJECT-TYPE
The override password for the user name defined by juniAaaAssignDomainOverrideUserName. This object is used to override the password part of the username/password pair of the remote client. This value returns a string length of 0 on reads for security reasons.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.11OCTET STRING (SIZE(0..32))read-createcurrent
juniAaaAssignDomainStripDomain
OBJECT-TYPE
Enables/disables the domain name stripping feature, which causes the system to strip the domain name before sending the access-request to RADIUS for authentication.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.12TruthValueread-createcurrent
juniAaaAssignDomainPoolName
OBJECT-TYPE
The name of the local address pool from which to allocate an IP address for the subscriber when none is returned from the authentication server.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.13DisplayString (SIZE(0..16))read-createcurrent
juniAaaAssignDomainLocalInterface
OBJECT-TYPE
The local interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on remote access user links.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.14DisplayString (SIZE(0..64))read-createcurrent
juniAaaAssignDomainIpv6RouterName
OBJECT-TYPE
The name of the virtual router to which remote access users within this domain are assigned for IPv6 interfaces.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.15JuniNameread-createcurrent
juniAaaAssignDomainIpv6LocalInterface
OBJECT-TYPE
The local interface, associated with the specified virtual router, whose IPv6 address is used as the source address when transmitting IPv6 packets on remote access user links.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.16DisplayString (SIZE(0..64))read-createcurrent
juniAaaAssignDomainTunnelGroup
OBJECT-TYPE
The tunnel group assigned to this domain map. Non default configuration of this object cannot coexist with matching tunnel entries in juniAaaAssignDomainTunnelTable.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.17JuniAaaTunnelGroupNameread-createcurrent
juniAaaAssignDomainAuthRouterName
OBJECT-TYPE
The name of the virtual router where remote access users within this domain will be authenticated.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.18JuniNameread-createcurrent
juniAaaAssignDomainIpRouterName
OBJECT-TYPE
The name of the virtual router to which remote access users within this domain are assigned for IP interfaces.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.19JuniNameread-createcurrent
juniAaaAssignDomainTunnelSubscriberAuthentication
OBJECT-TYPE
When there are tunnel configurations under this domain, enable or disable subscribers of this domain authenticate with configured authentication server.
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.20TruthValueread-createcurrent
juniAaaAssignDomainBackupPoolName
OBJECT-TYPE
The name of the backup local address pool from which to allocate an IP address for the subscriber when the primary address pool is 100% allocated
1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.21DisplayString (SIZE(0..16))read-createcurrent
juniAaaAssignDomainTunnelTable
OBJECT-TYPE
The entries in this table specify the tunnels associated with a domain.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2not-accessiblecurrent
juniAaaAssignDomainTunnelEntry
OBJECT-TYPE
A specification of the tunnels associated with a domain.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1not-accessiblecurrent
juniAaaAssignDomainTunnelName
OBJECT-TYPE
The domain name associated with this entry.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.1JuniAaaDomainNameread-onlycurrent
juniAaaAssignDomainTunnelTag
OBJECT-TYPE
The tunnel tag value associated with this entry.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.2Integer32 (1..31)read-onlycurrent
juniAaaAssignDomainTunnelPreference
OBJECT-TYPE
The tunnel's preference value associated with this entry. The value 0 is the highest preference.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.3Integer32 (0..2000)read-createcurrent
juniAaaAssignDomainTunnelType
OBJECT-TYPE
The tunnel type associated with this entry. Attempts to set this object to tunnelUnknown(2) and tunnelL2f(3) will fail (wrongValue).
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.4INTEGER {tunnelL2tp(1), tunnelUnknown(2), tunnelL2f(3)}read-createcurrent
juniAaaAssignDomainTunnelMedium
OBJECT-TYPE
The tunnel medium associated with this entry. The medium dictates the format of the tunnel address. Attempts to set this object to tunnelMediumUnknown(2) will fail (wrongValue).
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.5INTEGER {tunnelMediumIPv4(1), tunnelMediumUnknown(2)}read-createcurrent
juniAaaAssignDomainTunnelAddress
OBJECT-TYPE
The tunnel server address associated with this entry. The juniAaaAssignDomainTunnelMedium object defines the format of the address. MEDIUM EXAMPLE FORMAT tunnelMedium_IPv4 xyz.xyz.xyz.xyz
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.6DisplayString (SIZE(0..32))read-createcurrent
juniAaaAssignDomainTunnelPassword
OBJECT-TYPE
The tunnel password associated with this entry. The object returns a null length string on reads due to security concerns.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.7DisplayString (SIZE(0..32))read-createcurrent
juniAaaAssignDomainTunnelId
OBJECT-TYPE
The tunnel identifier associated with this entry. The tunnel identifier is used to distinguish between multiple tunnels to the same juniAaaAssignDomainTunnelAddress.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.8DisplayString (SIZE(0..32))read-createcurrent
juniAaaAssignDomainTunnelHostName
OBJECT-TYPE
The tunnel client hostname associated with this entry. This object is analogous to the RADIUS attribute Tunnel-Client-Auth-ID. When a tunnel is established with a peer, this object can be used to distinguish groups of tunnels.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.9DisplayString (SIZE(0..64))read-createcurrent
juniAaaAssignDomainTunnelRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.10RowStatusread-createcurrent
juniAaaAssignDomainTunnelServerName
OBJECT-TYPE
The tunnel server hostname associated with this entry. This object is analogous to the RADIUS attribute Tunnel-Server-Auth-ID. When a tunnel is established with a peer, this object can be used to distinguish groups of tunnels.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.11DisplayString (SIZE(0..64))read-createcurrent
juniAaaAssignDomainTunnelClientAddress
OBJECT-TYPE
The tunnel client address associated with this entry. The juniAaaAssignDomainTunnelMedium object defines the format of the address. MEDIUM EXAMPLE FORMAT tunnelMedium_IPv4 xyz.xyz.xyz.xyz
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.12DisplayString (SIZE(0..32))read-createcurrent
juniAaaAssignDomainTunnelMaxSessions
OBJECT-TYPE
The tunnel's max-session value associated with this entry. The value 0 indicates no maximum session value.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.13Unsigned32read-createcurrent
juniAaaAssignDomainTunnelReceiveWindowSize
OBJECT-TYPE
For an L2TP tunnel this object represents the receive window size. A value of 0 indicates that this object has no effect on the tunnel's receive window size.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.14Integer32 (0 | 4)read-createcurrent
juniAaaAssignDomainTunnelFailoverResync
OBJECT-TYPE
For an L2TP tunnel this object represents the failover resync mechanism: disable(0) - Disable failover resync failoverProtocol(1) - Use the L2TP Failover Protocol silentFailover(2) - Use the JUNOSe Silent Failover Mechanism failoverProtocolFallbackToSilentFailover(3) - (Default) Use the L2TP Failover Protocol and fall back to Silent Failover.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.15INTEGER {disable(0), failoverProtocol(1), silentFailover(2), failoverProtocolFallbackToSilentFailover(3), notConfigured(4)}read-createcurrent
juniAaaAssignDomainTunnelSwitchProfile
OBJECT-TYPE
The name of the L2TP tunnel switch profile to apply in tunnel switching scenarios.
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.16JuniAaaTunnelSwitchProfileNameread-createcurrent
juniAaaAssignDomainTunnelTxConnectSpeedMethod
OBJECT-TYPE
For an L2TP tunnel this object represents the tx connect speed method mechanism at the LAC: notSet(0) - this parameter has not been configured staticLayer2(1) - use static layer 2 settings dynamicLayer2(2) - use layer 2 settings including dynamic speeds qos(3) - use qos speed actual(4) - minimum of dynamicLayer2 and qos
1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.17INTEGER {notSet(0), staticLayer2(1), dynamicLayer2(2), qos(3), actual(4)}read-createcurrent
juniAaaAssignDomainPadnTable
OBJECT-TYPE
The entries in this table specify the PPPoE active discovery network (PADN) parameters associated with a domain.
1.3.6.1.4.1.4874.2.2.20.1.1.2.3not-accessiblecurrent
juniAaaAssignDomainPadnEntry
OBJECT-TYPE
A specification of the PPPoE active discovery network parameters associated with a domain.
1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1not-accessiblecurrent
juniAaaAssignDomainPadnIpAddress
OBJECT-TYPE
The IP address of this entry.
1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.1IpAddressnot-accessiblecurrent
juniAaaAssignDomainPadnIpMask
OBJECT-TYPE
The IP mask of this entry.
1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.2IpAddressnot-accessiblecurrent
juniAaaAssignDomainPadnRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.3RowStatusread-createcurrent
juniAaaAssignDomainPadnDistance
OBJECT-TYPE
The administrative distance metric of this entry.
1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.4Integer32 (0..255)read-createcurrent
juniAaaAuthentication
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.2
juniAaaAuthGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.2.1
juniAaaAuthMethods
OBJECT-TYPE
The set of authentication protocols configured on this system. Each octet in this object contains one of the values defined in the JuniAaaAuthenticationMethods TEXTUAL-CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding authentication protocol defined by JuniAaaAuthenticationMethods. Note that if the octet is set to: protocolNone(4) Then authentication does not take place. If an authentication protocol is configured and attempts to reach the authentication server fail, the system will move to the next octet in this object and retry the authentication in the form dictated by the corresponding authentication protocoltype. The process of sequencing thru each octet will stop if the authentication server is successfully contacted, or there are no more configured octets in this object.
1.3.6.1.4.1.4874.2.2.20.1.2.1.1OCTET STRING (SIZE(0..5))read-writeobsolete
juniAaaAuthMethodsTable
OBJECT-TYPE
The entries in this table specify the assignment of authentication methods for a particular subscriber type.
1.3.6.1.4.1.4874.2.2.20.1.2.1.2not-accessiblecurrent
juniAaaAuthMethodsEntry
OBJECT-TYPE
A specification of the authentication methods for a particular subscriber type.
1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1not-accessiblecurrent
juniAaaAuthMethodsSubscriberType
OBJECT-TYPE
The subscriber type.
1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1.1JuniAaaAuthenticationSubscriberTypesread-onlycurrent
juniAaaAuthMethodsAuthentication
OBJECT-TYPE
The set of authentication protocols configured on this system. Each octet in this object contains one of the values defined in the JuniAaaAuthenticationMethods TEXTUAL-CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding authentication protocol defined by JuniAaaAuthenticationMethods. Note that if the octet is set to: protocolNone(4) Then authentication does not take place. If an authentication protocol is configured and attempts to reach the authentication server fail, the system will move to the next octet in this object and retry the authentication in the form dictated by the corresponding authentication protocoltype. The process of sequencing thru each octet will stop if the authentication server is successfully contacted, or there are no more configured octets in this object.
1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1.2OCTET STRING (SIZE(0..5))read-writecurrent
juniAaaLocalAuth
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.2.2
juniAaaLocalAuthUser
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.2.2.1
juniAaaLocalAuthUserTable
OBJECT-TYPE
This table contains entries for users present in the local user databases.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1not-accessiblecurrent
juniAaaLocalAuthUserEntry
OBJECT-TYPE
Each entry in this table represents a single user in a local user database.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1not-accessiblecurrent
juniAaaLocalAuthUserName
OBJECT-TYPE
The name of the user.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.1DisplayString (SIZE(1..64))not-accessiblecurrent
juniAaaLocalAuthUserRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.2RowStatusread-createcurrent
juniAaaLocalAuthUserPassword
OBJECT-TYPE
The password for this user. If the juniAaaLocalAuthUserEncrypted object is not set with this object, the password value is assumed to be unencrypted. When set, any existing password is overwritten. Setting a zero length OCTET STRING removes the password. Reading this object always results in a zero length OCTET STRING.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.3OCTET STRING (SIZE(0..32))read-createcurrent
juniAaaLocalAuthUserEncryption
OBJECT-TYPE
The encryption type of the password value being set with the juniAaaLocalAuthUserPassword object. Reading this object always results in a value of encryptionNone. encyptionNone - The password is unencrypted (i.e. in plain text.) encyptionSecret - The password has been generated using a one-way MD5 encryption mechanism, algorithm 5. encyptionPassword - The password has been generated using a two-way encryption mechanism, algorithm 8.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.4INTEGER {encryptionNone(0), encryptionSecret(5), encryptionPassword(8)}read-createcurrent
juniAaaLocalAuthUserIpAddress
OBJECT-TYPE
The IP address this user is to be assigned, once authenticated. This object corresponds to the Framed-IP-Address attribute in RADIUS authentication servers.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.5IpAddressread-createcurrent
juniAaaLocalAuthUserIpAddressPool
OBJECT-TYPE
The name of the local address pool this user is to be allocated an IP address from, once authenticated. This object corresponds to the Framed-Pool attribute in RADIUS authentication servers.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.6DisplayString (SIZE(0..16))read-createcurrent
juniAaaLocalAuthUserRouterName
OBJECT-TYPE
The name of the router this user is to be assigned to, once authenticated. This object corresponds to the Unispher-Virtual-Router attribute in RADIUS authentication servers.
1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.7JuniNameread-createcurrent
juniAaaLocalAuthUserDb
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.2.2.2
juniAaaLocalAuthUserDbTable
OBJECT-TYPE
This table contains entries for local user databases.
1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1not-accessiblecurrent
juniAaaLocalAuthUserDbEntry
OBJECT-TYPE
Each entry in this table represents a single local user database.
1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1not-accessiblecurrent
juniAaaLocalAuthUserDbName
OBJECT-TYPE
The name of this local user database.
1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
juniAaaLocalAuthUserDbRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported.
1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1.2RowStatusread-createcurrent
juniAaaLocalAuthUserDbAssoc
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.2.2.3
juniAaaLocalAuthUserDbAssocTable
OBJECT-TYPE
This table contains entries that identify the local user database that is associated with each virtual router.
1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1not-accessiblecurrent
juniAaaLocalAuthUserDbAssocEntry
OBJECT-TYPE
Each entry in this table represents a single association between a virtual router and local user database. The same database can be referenced by multiple virtual routers; however, a virtual router can reference only one database. No entries are displayed for virtual routers that reference the default local user database.
1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1not-accessiblecurrent
juniAaaLocalAuthUserDbAssocRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported. When a virtual router is deleted, its corresponding entries in this table will be deleted as well.
1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1.1RowStatusread-createcurrent
juniAaaLocalAuthUserDbAssocDbName
OBJECT-TYPE
The name of local user database associated with this virtual router. Setting the name to the default local user database, 'default', will delete this entry, as this is the default association for all virtual routers.
1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1.2DisplayString (SIZE(1..32))read-createcurrent
juniAaaAccounting
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.3
juniAaaAcctGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.3.1
juniAaaAcctInterval
OBJECT-TYPE
The interval that must elapse between generation of accounting reports, ranging from 10 minutes to 24 hours, or disabled if set to zero. The set of this object affects both the juniAaaServiceAcctInterval and juniAaaUserAcctInterval values; the get of this object returns only the juniAaaUserAcctInterval value.
1.3.6.1.4.1.4874.2.2.20.1.3.1.1Integer32 (0 | 600..86400)read-writecurrent
juniAaaAcctDupServerRouterName
OBJECT-TYPE
The name of another router on this system to which accounting reports should be sent, in addition to or instead of sending accounting reports to the accounting service (if any) configured on the current router (i.e., the router context within which this object instance exists). A zero-length name disables this mechanism.
1.3.6.1.4.1.4874.2.2.20.1.3.1.2JuniNameread-writecurrent
juniAaaAcctMethods
OBJECT-TYPE
The set of accounting protocols configured on this system. Each octet in this object contains one of the values defined in the JuniAaaAccountingMethods TEXTUAL CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding accounting protocol defined by JuniAaaAccountingMethods. Note that if the octet is set to: protocolNone(4) Then accounting is disabled. If an accounting protocol is configured and reports are not successfully generated, the system will move to the next octet in this object and repeat the attempt to generate an accounting report in the form dictated by the corresponding accounting protocol type. The process of sequencing thru each octet will stop if accounting reports are either successfully generated, or there are no more configured octets in this object.
1.3.6.1.4.1.4874.2.2.20.1.3.1.3OCTET STRING (SIZE(0..5))read-writeobsolete
juniAaaAcctSendStopOnAaaDeny
OBJECT-TYPE
Enables/disables the accounting stop message sent to the accounting server when authentication server grants access, but AAA denies access.
1.3.6.1.4.1.4874.2.2.20.1.3.1.4TruthValueread-writecurrent
juniAaaAcctSendStopOnAaaReject
OBJECT-TYPE
Enables/disables the accounting stop message sent to the accounting server when authentication server denies access.
1.3.6.1.4.1.4874.2.2.20.1.3.1.5TruthValueread-writecurrent
juniAaaAcctSendImmediateAcctUpdate
OBJECT-TYPE
Enables/disables the sending of an accounting update with the client's IP address upon receipt of accounting start response.
1.3.6.1.4.1.4874.2.2.20.1.3.1.6TruthValueread-writecurrent
juniAaaAcctMethodsTable
OBJECT-TYPE
The entries in this table specify the assignment of accounting methods for a particular subscriber type.
1.3.6.1.4.1.4874.2.2.20.1.3.1.7not-accessiblecurrent
juniAaaAcctMethodsEntry
OBJECT-TYPE
A specification of the accounting methods for a particular subscriber type.
1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1not-accessiblecurrent
juniAaaAcctMethodsSubscriberType
OBJECT-TYPE
The subscriber type.
1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1.1JuniAaaAccountingSubscriberTypesread-onlycurrent
juniAaaAcctMethodsAccounting
OBJECT-TYPE
The set of accounting protocols configured on this system. Each octet in this object contains one of the values defined in the JuniAaaAccountingMethods TEXTUAL CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding accounting protocol defined by JuniAaaAccountingMethods. Note that if the octet is set to: protocolNone(4) Then accounting is disabled. If an accounting protocol is configured and reports are not successfully generated, the system will move to the next octet in this object and repeat the attempt to generate an accounting report in the form dictated by the corresponding accounting protocol type. The process of sequencing thru each octet will stop if accounting reports are either successfully generated, or there are no more configured octets in this object.
1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1.2OCTET STRING (SIZE(0..5))read-writecurrent
juniAaaAcctBcastServerGroupName
OBJECT-TYPE
The name of a group of other routers on this system to which accounting reports should be sent, for every subsriber who has this router assigned as an operational router. A zero-length name disables this mechanism.
1.3.6.1.4.1.4874.2.2.20.1.3.1.8JuniVrfGroupNameread-writecurrent
juniAaaUserAcctInterval
OBJECT-TYPE
The interval that must elapse between generation of user accounting reports, ranging from 10 minutes to 24 hours, or disabled if set to zero.
1.3.6.1.4.1.4874.2.2.20.1.3.1.9Integer32 (0 | 600..86400)read-writecurrent
juniAaaServiceAcctInterval
OBJECT-TYPE
The interval that must elapse between generation of service accounting reports, ranging from 10 minutes to 24 hours, or disabled if set to zero.
1.3.6.1.4.1.4874.2.2.20.1.3.1.10Integer32 (0 | 600..86400)read-writecurrent
juniAaaAcctBcastConfig
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.3.2
juniAaaAcctBcastServerGroupTable
OBJECT-TYPE
The entries in this table specify broadcast accounting routers of the named group. In addition to row status operations if juniAaaAcctBrasServerGroupRouter1, juniAaaAcctBrasServerGroupRouter2, juniAaaAcctBrasServerGroupRouter3 and juniAaaAcctBrasServerGroupRouter4 are all set zero length strings, the entry will be deleted. At least one non zero length string router is required to successfully create and entry. All non zero length string routers have to be unique within the group.
1.3.6.1.4.1.4874.2.2.20.1.3.2.1not-accessiblecurrent
juniAaaAcctBcastServerGroupEntry
OBJECT-TYPE
A specification of the accounting servers for a particular group.
1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1not-accessiblecurrent
juniAaaAcctBcastServerGroup
OBJECT-TYPE
The group name.
1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.1JuniVrfGroupNamenot-accessiblecurrent
juniAaaAcctBcastServerGroupRouter1
OBJECT-TYPE
The name of the first router in the group.
1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.2JuniNameread-writecurrent
juniAaaAcctBcastServerGroupRouter2
OBJECT-TYPE
The name of the second router in the group.
1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.3JuniNameread-writecurrent
juniAaaAcctBcastServerGroupRouter3
OBJECT-TYPE
The name of the third router in the group.
1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.4JuniNameread-writecurrent
juniAaaAcctBcastServerGroupRouter4
OBJECT-TYPE
The name of the third router in the group.
1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.5JuniNameread-writecurrent
juniAaaAcctBcastServerGroupRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. In addition to row status operations if juniAaaAcctBrasServerGroupRouter1, juniAaaAcctBrasServerGroupRouter2, juniAaaAcctBrasServerGroupRouter3 and juniAaaAcctBrasServerGroupRouter4 are all set zero length strings, the entry will be deleted. At least one non zero length string router is required to successfully create and entry.
1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.6RowStatusread-writecurrent
juniAaaAddress
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.4
juniAaaAddrGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.4.1
juniAaaAddrPoolDefault
OBJECT-TYPE
Identifies the default source of IP address allocation for remote access links: none No address source is specified. Using this setting allows the remote PPP subscriber (client) to set it's own address. local Use the local address pool named 'default'. dhcp Use DHCP service.
1.3.6.1.4.1.4874.2.2.20.1.4.1.1INTEGER {none(0), local(1), dhcp(2)}read-writecurrent
juniAaaDupAddrCheck
OBJECT-TYPE
Enables/disables the duplicate IP address checking which causes the system to check the route table for the PPP user's dynamic IP address is provided to PPP (from AAA).
1.3.6.1.4.1.4874.2.2.20.1.4.1.2TruthValueread-writecurrent
juniAaaAddrNameServer
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.4.2
juniAaaAddrDns
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.4.2.1
juniAaaAddrDnsPrimary
OBJECT-TYPE
The IP address of the primary DNS server to be used by remote access clients. A value of 0.0.0.0 indicates no server is configured.
1.3.6.1.4.1.4874.2.2.20.1.4.2.1.1IpAddressread-writecurrent
juniAaaAddrDnsSecondary
OBJECT-TYPE
The IP address of the secondary DNS server to be used by remote access clients. A value of 0.0.0.0 indicates no server is configured.
1.3.6.1.4.1.4874.2.2.20.1.4.2.1.2IpAddressread-writecurrent
juniAaaAddrIpv6DnsPrimary
OBJECT-TYPE
The IPv6 address of the primary IPv6 DNS server to be used by remote access clients. A value of ::0 indicates no server is configured.
1.3.6.1.4.1.4874.2.2.20.1.4.2.1.3Ipv6Addressread-writecurrent
juniAaaAddrIpv6DnsSecondary
OBJECT-TYPE
The IPv6 address of the secondary IPv6 DNS server to be used by remote access clients. A value of ::0 indicates no server is configured.
1.3.6.1.4.1.4874.2.2.20.1.4.2.1.4Ipv6Addressread-writecurrent
juniAaaAddrWins
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.4.2.2
juniAaaAddrWinsPrimary
OBJECT-TYPE
The IP address of the primary WINS server to be used by remote access clients. A value of 0.0.0.0 indicates no server is configured.
1.3.6.1.4.1.4874.2.2.20.1.4.2.2.1IpAddressread-writecurrent
juniAaaAddrWinsSecondary
OBJECT-TYPE
The IP address of the secondary WINS server to be used by remote access clients. A value of 0.0.0.0 indicates no server is configured.
1.3.6.1.4.1.4874.2.2.20.1.4.2.2.2IpAddressread-writecurrent
juniAaaStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.5
juniAaaIncomingInitiateRequests
OBJECT-TYPE
The number of AAA incoming initiate requests
1.3.6.1.4.1.4874.2.2.20.1.5.1Counter32read-onlycurrent
juniAaaIncomingTerminateRequests
OBJECT-TYPE
The number of AAA incomining termination requests
1.3.6.1.4.1.4874.2.2.20.1.5.2Counter32read-onlycurrent
juniAaaOutgoingTunnelGrantResponses
OBJECT-TYPE
The number of AAA outgoing tunnel grant responses
1.3.6.1.4.1.4874.2.2.20.1.5.3Counter32read-onlycurrent
juniAaaOutgoingGrantResponses
OBJECT-TYPE
The number of AAA outgoing grant responses
1.3.6.1.4.1.4874.2.2.20.1.5.4Counter32read-onlycurrent
juniAaaOutgoingDenyResponses
OBJECT-TYPE
The number of AAA outgoing deny responses
1.3.6.1.4.1.4874.2.2.20.1.5.5Counter32read-onlycurrent
juniAaaOutgoingErrorResponses
OBJECT-TYPE
The number of AAA outgoing error responses
1.3.6.1.4.1.4874.2.2.20.1.5.6Counter32read-onlycurrent
juniAaaOutgoingAuthRequests
OBJECT-TYPE
The number of AAA outgoing authentication requests
1.3.6.1.4.1.4874.2.2.20.1.5.7Counter32read-onlycurrent
juniAaaIncomingAuthResponses
OBJECT-TYPE
The number of AAA incoming authentication responses
1.3.6.1.4.1.4874.2.2.20.1.5.8Counter32read-onlycurrent
juniAaaOutgoingReAuthRequests
OBJECT-TYPE
The number of AAA outgoing re-authentication requests
1.3.6.1.4.1.4874.2.2.20.1.5.9Counter32read-onlycurrent
juniAaaIncomingReAuthResponses
OBJECT-TYPE
The number of AAA incoming re-authentication responses
1.3.6.1.4.1.4874.2.2.20.1.5.10Counter32read-onlycurrent
juniAaaOutgoingAcctRequests
OBJECT-TYPE
The number of AAA outgoing accounting requests
1.3.6.1.4.1.4874.2.2.20.1.5.11Counter32read-onlycurrent
juniAaaIncomingAcctResponses
OBJECT-TYPE
The number of AAA incoming accounting responses
1.3.6.1.4.1.4874.2.2.20.1.5.12Counter32read-onlycurrent
juniAaaOutgoingDupAcctRequests
OBJECT-TYPE
The number of AAA outgoing duplicate accounting requests
1.3.6.1.4.1.4874.2.2.20.1.5.13Counter32read-onlycurrent
juniAaaIncomingDupAcctResponses
OBJECT-TYPE
The number of AAA incoing duplication accounting responses
1.3.6.1.4.1.4874.2.2.20.1.5.14Counter32read-onlycurrent
juniAaaOutgoingAddrRequests
OBJECT-TYPE
The number of AAA outgoing address requests
1.3.6.1.4.1.4874.2.2.20.1.5.15Counter32read-onlycurrent
juniAaaIncomingAddrResponses
OBJECT-TYPE
The number of AAA incoming address responses
1.3.6.1.4.1.4874.2.2.20.1.5.16Counter32read-onlycurrent
juniAaaOutgoingBcastAcctRequests
OBJECT-TYPE
The number of AAA outgoing broadcast accounting requests
1.3.6.1.4.1.4874.2.2.20.1.5.17Counter32read-onlycurrent
juniAaaIncomingBcastAcctResponses
OBJECT-TYPE
The number of AAA incoing broadcast accounting responses
1.3.6.1.4.1.4874.2.2.20.1.5.18Counter32read-onlycurrent
juniAaaTimeout
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.6
juniAaaTimeoutGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.6.1
juniAaaIdleTimeout
OBJECT-TYPE
The maximum number of seconds that a user session can be idle before system disconnects the user, ranging from 300 to 86400 seconds, 0 disables idle timeout.
1.3.6.1.4.1.4874.2.2.20.1.6.1.1Integer32 (0 | 300..86400)read-writecurrent
juniAaaSessionTimeout
OBJECT-TYPE
The maximum number of seconds that a user session can be established before system disconnects the user, ranging from 60 to 31622400 seconds. 0 specifies that a default value should be used, according to the rules of the implementing interface.
1.3.6.1.4.1.4874.2.2.20.1.6.1.2Integer32 (0 | 60..31622400)read-writecurrent
juniAaaMonitorIngressTrafficOnly
OBJECT-TYPE
Enables/disables the monitoring of ingress traffic. Inactive sessions are disconnected after a period, specified in juniAaaIdleTimeout. Inactivity is determined by both inbound and outbound traffic. If this option is enabled, only ingress traffic is monitored for determining session inactivity.
1.3.6.1.4.1.4874.2.2.20.1.6.1.3JuniEnableread-writecurrent
juniAaaTunnel
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.7
juniAaaTunnelGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.7.1
juniAaaTunnelClientName
OBJECT-TYPE
The default tunnel client hostname associated with this virtual router. This object is used when no tunnel client name (client auth ID) is supplied in the authentication response.
1.3.6.1.4.1.4874.2.2.20.1.7.1.1DisplayString (SIZE(0..64))read-writecurrent
juniAaaTunnelPassword
OBJECT-TYPE
The default tunnel password associated with this virtual router. This object is used when no tunnel password is supplied in the authentication response. The object returns a null length string on reads due to security concerns.
1.3.6.1.4.1.4874.2.2.20.1.7.1.2DisplayString (SIZE(0..32))read-writecurrent
juniAaaTunnelNasPortMethod
OBJECT-TYPE
The default tunnel NAS-port method associated with this virtual router. This object is used to specify the LAC's NAS-port method. This provides limit compatiability to Cisco LNS for the NAS-port method AVP.
1.3.6.1.4.1.4874.2.2.20.1.7.1.3INTEGER {none(0), ciscoAvp(1)}read-writecurrent
juniAaaTunnelIgnoreNasPort
OBJECT-TYPE
Enables/disables the use of the NAS-port value that is passed in from the tunnel application.
1.3.6.1.4.1.4874.2.2.20.1.7.1.4TruthValueread-writecurrent
juniAaaTunnelIgnoreNasPortType
OBJECT-TYPE
Enables/disables the use of the NAS-port-type value that is passed in from the tunnel application.
1.3.6.1.4.1.4874.2.2.20.1.7.1.5TruthValueread-writecurrent
juniAaaTunnelAssignmentIdFormat
OBJECT-TYPE
The tunnel assignment ID format for distinguishing tunnel definitions. This object is used to specify the tunnel assigment ID format passed to the LAC. The value assignmentId(0) indicates that the original tunnel assignment ID value is to be used; clientServerId(1) indicates that the concatenated value from client-auth-name, server-auth-name, and assignment-id is to be used.
1.3.6.1.4.1.4874.2.2.20.1.7.1.6INTEGER {assignmentId(0), clientServerId(1)}read-writecurrent
juniAaaTunnelSwitchProfile
OBJECT-TYPE
The default tunnel switch profile associated with this virtual router. This object is used when no tunnel switch profile is supplied in the authentication response.
1.3.6.1.4.1.4874.2.2.20.1.7.1.7JuniAaaTunnelSwitchProfileNameread-writecurrent
juniAaaTunnelTxConnectSpeedMethod
OBJECT-TYPE
The default tunnel tx connect speed method associated with this virtual router. This object is used to specify the LAC's tx connect speed method.
1.3.6.1.4.1.4874.2.2.20.1.7.1.8INTEGER {notSet(0), staticLayer2(1), dynamicLayer2(2), qos(3), actual(4)}read-writecurrent
juniAaaTunnelGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.7.2
juniAaaTunnelGroupTable
OBJECT-TYPE
The entries in this table specify tunnel attributes sufficient tunnel establishment.
1.3.6.1.4.1.4874.2.2.20.1.7.2.1not-accessiblecurrent
juniAaaTunnelGroupEntry
OBJECT-TYPE
An entry in the tunnel group table.
1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1not-accessiblecurrent
juniAaaTunnelGroupName
OBJECT-TYPE
The tunnel group name uniquely identifying this entry.
1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1.1JuniAaaTunnelGroupNameread-onlycurrent
juniAaaTunnelGroupRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1.2RowStatusread-createcurrent
juniAaaTunnelGroupTunnelTable
OBJECT-TYPE
The entries in this table specify the tunnels associated with a tunnel group.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2not-accessiblecurrent
juniAaaTunnelGroupTunnelEntry
OBJECT-TYPE
A specification of the tunnels associated with a tunnel group.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1not-accessiblecurrent
juniAaaTunnelGroupTunnelName
OBJECT-TYPE
The tunnel group name associated with this entry.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.1JuniAaaTunnelGroupNameread-onlycurrent
juniAaaTunnelGroupTunnelTag
OBJECT-TYPE
The tunnel tag value associated with this entry.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.2Integer32 (1..31)read-onlycurrent
juniAaaTunnelGroupTunnelPreference
OBJECT-TYPE
The tunnel's preference value associated with this entry. The value 0 is the highest preference.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.3Integer32 (0..2000)read-createcurrent
juniAaaTunnelGroupTunnelType
OBJECT-TYPE
The tunnel type associated with this entry.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.4INTEGER {tunnelL2tp(1)}read-createcurrent
juniAaaTunnelGroupTunnelMedium
OBJECT-TYPE
The tunnel medium associated with this entry. The medium dictates the format of the tunnel address. Attempts to set this object to tunnelMediumUnknown(2) will fail (wrongValue).
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.5INTEGER {tunnelMediumIPv4(1), tunnelMediumUnknown(2)}read-createcurrent
juniAaaTunnelGroupTunnelAddress
OBJECT-TYPE
The tunnel server address associated with this entry. The juniAaaTunnelGroupTunnelMedium object defines the format of the address. MEDIUM EXAMPLE FORMAT tunnelMedium_IPv4 xyz.xyz.xyz.xyz
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.6DisplayString (SIZE(0..32))read-createcurrent
juniAaaTunnelGroupTunnelPassword
OBJECT-TYPE
The tunnel password associated with this entry. The object returns a null length string on reads due to security concerns.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.7DisplayString (SIZE(0..32))read-createcurrent
juniAaaTunnelGroupTunnelId
OBJECT-TYPE
The tunnel identifier associated with this entry. The tunnel identifier is used to distinguish between multiple tunnels to the same juniAaaTunnelGroupTunnelAddress.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.8DisplayString (SIZE(0..32))read-createcurrent
juniAaaTunnelGroupTunnelHostName
OBJECT-TYPE
The tunnel client hostname associated with this entry. This object is analogous to the RADIUS attribute Tunnel-Client-Auth-ID. When a tunnel is established with a peer, this object can be used to distinguish groups of tunnels.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.9DisplayString (SIZE(0..64))read-createcurrent
juniAaaTunnelGroupTunnelRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.10RowStatusread-createcurrent
juniAaaTunnelGroupTunnelServerName
OBJECT-TYPE
The tunnel server hostname associated with this entry. This object is analogous to the RADIUS attribute Tunnel-Server-Auth-ID. When a tunnel is established with a peer, this object can be used to distinguish groups of tunnels.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.11DisplayString (SIZE(0..64))read-createcurrent
juniAaaTunnelGroupTunnelClientAddress
OBJECT-TYPE
The tunnel client address associated with this entry. The juniAaaTunnelGroupTunnelMedium object defines the format of the address. MEDIUM EXAMPLE FORMAT tunnelMedium_IPv4 xyz.xyz.xyz.xyz
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.12DisplayString (SIZE(0..32))read-createcurrent
juniAaaTunnelGroupTunnelMaxSessions
OBJECT-TYPE
The tunnel's max-session value associated with this entry. The value 0 indicates no maximum session value.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.13Integer32read-createcurrent
juniAaaTunnelGroupTunnelReceiveWindowSize
OBJECT-TYPE
For an L2TP tunnel this object represents the receive window size. A value of 0 indicates that this object has no effect on the tunnel's receive window size.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.14Integer32 (0 | 4)read-createcurrent
juniAaaTunnelGroupTunnelRouterName
OBJECT-TYPE
The name of the virtual router to which remote access users within this tunnel are assigned.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.15JuniNameread-createcurrent
juniAaaTunnelGroupTunnelFailoverResync
OBJECT-TYPE
For an L2TP tunnel this object represents the failover resync mechanism: disable(0) - Disable failover resync failoverProtocol(1) - Use the L2TP Failover Protocol silentFailover(2) - Use the JUNOSe Silent Failover Mechanism failoverProtocolFallbackToSilentFailover(3) - (Default) Use the L2TP Failover Protocol and fall back to Silent Failover.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.16INTEGER {disable(0), failoverProtocol(1), silentFailover(2), failoverProtocolFallbackToSilentFailover(3), notConfigured(4)}read-createcurrent
juniAaaTunnelGroupTunnelSwitchProfile
OBJECT-TYPE
The name of the L2TP tunnel switch profile to apply in tunnel switching scenarios.
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.17JuniAaaTunnelSwitchProfileNameread-createcurrent
juniAaaTunnelGroupTunnelTxConnectSpeedMethod
OBJECT-TYPE
For an L2TP tunnel this object represents the tx connect speed method mechanism at the LAC: notSet(0) - this parameter has not been configured staticLayer2(1) - use static layer 2 settings dynamicLayer2(2) - use layer 2 settings including dynamic speeds qos(3) - use qos speed actual(4) - minimum of dynamicLayer2 and qos
1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.18INTEGER {notSet(0), staticLayer2(1), dynamicLayer2(2), qos(3), actual(4)}read-createcurrent
juniAaaSubscribers
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.8
juniAaaSubscriberMaxCount
OBJECT-TYPE
The configuration setting for the maximum number of subscribers. There is a grace number of subscribers above this limit, which when reached will cause authentication requests to be denied.
1.3.6.1.4.1.4874.2.2.20.1.8.1Integer32read-onlycurrent
juniAaaSubscriberPeakCount
OBJECT-TYPE
The peak number of subscribers. The peak count includes successfully authenticated subscribers as well as those subscribers in the process of being authenticated.
1.3.6.1.4.1.4874.2.2.20.1.8.2Gauge32read-onlycurrent
juniAaaSubscriberCount
OBJECT-TYPE
The current number of subscribers. The subscriber count includes successfully authenticated subscribers as well as those subscribers in the process of being authenticated.
1.3.6.1.4.1.4874.2.2.20.1.8.3Gauge32read-onlycurrent
juniAaaSubscriberTable
OBJECT-TYPE
The entries in this table represent subscribers by subscriber handle value.
1.3.6.1.4.1.4874.2.2.20.1.8.4not-accessiblecurrent
juniAaaSubscriberEntry
OBJECT-TYPE
A specification of subscribers by subscriber handle.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1not-accessiblecurrent
juniAaaSubscriberHandle
OBJECT-TYPE
The subscriber handle associated with this subscriber. A subscriber handle is a monotomically increasing integer.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.1Unsigned32not-accessiblecurrent
juniAaaSubscriberUserName
OBJECT-TYPE
The RADIUS userName associated with this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.2DisplayStringread-onlycurrent
juniAaaSubscriberRouterName
OBJECT-TYPE
The virtual router assigned to this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.3JuniNameread-onlycurrent
juniAaaSubscriberRouterIndex
OBJECT-TYPE
The router index that identifies the virtual router associated with this subscriber. The value of this object can be used to index the router in the juniRouterTable.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.4Unsigned32read-onlycurrent
juniAaaSubscriberLoginTime
OBJECT-TYPE
The time this subscriber logged in to RADIUS server.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.5DisplayStringread-onlycurrent
juniAaaSubscriberIpAddress
OBJECT-TYPE
The client IP Address assigned to this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.6IpAddressread-onlycurrent
juniAaaSubscriberIpAddressMask
OBJECT-TYPE
The client IP Address Mask assigned to this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.7IpAddressread-onlycurrent
juniAaaSubscriberAddrAssignType
OBJECT-TYPE
The address assignment type for this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.8JuniAddressAssignTyperead-onlycurrent
juniAaaSubscriberInterfaceId
OBJECT-TYPE
A text string describing the local interface associated with this subscriber. Types/formats/examples for this string include: ERX: <portLocation> == <slot>/<port>; E320: <portLocation> == <slot>/<adapter>/<port>; ATM Virtual Circuit atm <portLocation>:<vpi>.<vci> 'atm 3/2:0.100' (ERX) 'atm 3/0/2:0.100' (E320) Ethernet { fastEthernet | gigabitEthernet } <portLocation> 'fastEthernet 3/2' (ERX) 'gigabitEthernet 3/2' (ERX) 'gigabitEthernet 3/0/2' (E320) 'tenGigabitEthernet 3/0/2' (E320) Ethernet VLAN { fastEthernet | gigabitEthernet } <portLocation>:<vlanID> 'fastEthernet 3/2:1000' (ERX) 'gigabitEthernet 3/2:1000' (ERX) 'gigabitEthernet 3/0/2:1000' (E320) 'tenGigabitEthernet 3/0/2:1000' (E320) Channelized Serial serial <portLocation>:<channelSpecifier>[/<channelSpecifier>]* 'serial 3/2:4' (ERX T1/E1) 'serial 3/2:2/4' (ERX T3/E3) 'serial 3/2:2/1/1/4' (ERX OC3/OC12 - channelized DS3) 'serial 3/2:2/1/1/1/4' (ERX OC3/OC12 - virtual tributaries) 'serial 3/0/2:2/1/1/4' (E320 OC3/OC12 - channelized DS3) 'serial 3/0/2:2/1/1/1/4' (E320 OC3/OC12 - virtual tributaries) L2TP over IP ip:<localIpAddr>:<peerIpAddr>:<localTunnelID>:<peerTunnelID>: <localSessionID>:<peerSessionID>:<callSerialNumber> 'ip:10.10.0.1:20.20.0.2:1234:5678:9abc:def0:6789abcd' (Note: tunnelIDs, sessionIDs, and callSerialNumber are in hexadecimal.) Other formats may be supported over time.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.9DisplayStringread-onlycurrent
juniAaaSubscriberState
OBJECT-TYPE
The state of this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.10JuniSubscriberStateread-onlycurrent
juniAaaSubscriberClientType
OBJECT-TYPE
The client type for this subscriber. Certain client types (e.g., 'other') might be suppressed from representation in this table.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.11JuniSubscriberClientTyperead-onlycurrent
juniAaaSubscriberIngressPolicyName
OBJECT-TYPE
The Ingress Policy Name associated with this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.12DisplayStringread-onlycurrent
juniAaaSubscriberEgressPolicyName
OBJECT-TYPE
The Egress Policy Name associated with this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.13DisplayStringread-onlycurrent
juniAaaSubscriberQosProfileName
OBJECT-TYPE
The QoS Profile Name associated with this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.14DisplayStringread-onlycurrent
juniAaaSubscriberRowStatus
OBJECT-TYPE
Controls the deletion of the subscriber from this table. Deletion of the subscriber is analogous to logging the subscriber out of the network. Note: only 'destroy' is supported for SNMP SET operations.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.15RowStatusread-writecurrent
juniAaaSubscriberIpv6RouterIndex
OBJECT-TYPE
The router index that identifies the virtual router associated with this subscriber's IPv6 interface. The value of this object can be used to index the router in the juniRouterTable.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.16Unsigned32read-onlycurrent
juniAaaSubscriberIpv6AddrIfIdentifier
OBJECT-TYPE
The client IPv6 Address Interface Identifier assigned to this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.4.1.17Ipv6AddressIfIdentifierread-onlycurrent
juniAaaSubscriberRouterSummaryTable
OBJECT-TYPE
The entries in this table report number of subscribers per router.
1.3.6.1.4.1.4874.2.2.20.1.8.5not-accessiblecurrent
juniAaaSubscriberRouterSummaryEntry
OBJECT-TYPE
A specification of subscribers for a router.
1.3.6.1.4.1.4874.2.2.20.1.8.5.1not-accessiblecurrent
juniAaaSubscriberRouterSummaryRouterIndex
OBJECT-TYPE
The router index of the virtual router. The value of this object can be used to retrieve additional information in the router mib.
1.3.6.1.4.1.4874.2.2.20.1.8.5.1.1Unsigned32not-accessiblecurrent
juniAaaSubscriberRouterSummaryCount
OBJECT-TYPE
The number of subscribers on this router.
1.3.6.1.4.1.4874.2.2.20.1.8.5.1.2Gauge32read-onlycurrent
juniAaaSubscriberRouterTable
OBJECT-TYPE
The entries in this table sort subscribers by router ID.
1.3.6.1.4.1.4874.2.2.20.1.8.6not-accessiblecurrent
juniAaaSubscriberRouterEntry
OBJECT-TYPE
A specification of subscribers by router ID.
1.3.6.1.4.1.4874.2.2.20.1.8.6.1not-accessiblecurrent
juniAaaSubscriberRouterRouterIndex
OBJECT-TYPE
The router index of the virtual router. The value of this object can be used to retrieve additional information in the router MIB.
1.3.6.1.4.1.4874.2.2.20.1.8.6.1.1Unsigned32not-accessiblecurrent
juniAaaSubscriberRouterHandle
OBJECT-TYPE
The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing integer.
1.3.6.1.4.1.4874.2.2.20.1.8.6.1.2Unsigned32not-accessiblecurrent
juniAaaSubscriberRouterRowStatus
OBJECT-TYPE
Always has value 'active'.
1.3.6.1.4.1.4874.2.2.20.1.8.6.1.3RowStatusread-onlycurrent
juniAaaSubscriberLocationType
OBJECT-TYPE
Describes the interpretation of JuniInterfaceLocationValue object values into platform-dependent interface location components, e.g., 'slot.port' on an ERX.
1.3.6.1.4.1.4874.2.2.20.1.8.7JuniInterfaceLocationTyperead-onlycurrent
juniAaaSubscriberLocationSummaryTable
OBJECT-TYPE
The entries in this table report number of subscribers per interface location.
1.3.6.1.4.1.4874.2.2.20.1.8.8not-accessiblecurrent
juniAaaSubscriberLocationSummaryEntry
OBJECT-TYPE
A specification of subscribers on an interface location.
1.3.6.1.4.1.4874.2.2.20.1.8.8.1not-accessiblecurrent
juniAaaSubscriberLocationSummaryLocationIndex
OBJECT-TYPE
The value of a platform interface location.
1.3.6.1.4.1.4874.2.2.20.1.8.8.1.1JuniInterfaceLocationValuenot-accessiblecurrent
juniAaaSubscriberLocationSummaryCount
OBJECT-TYPE
The number of subscribers associated with this interface location.
1.3.6.1.4.1.4874.2.2.20.1.8.8.1.2Gauge32read-onlycurrent
juniAaaSubscriberLocationTable
OBJECT-TYPE
The entries in this table sort subscribers by interface location.
1.3.6.1.4.1.4874.2.2.20.1.8.9not-accessiblecurrent
juniAaaSubscriberLocationEntry
OBJECT-TYPE
An association of a subscriber to an interface location.
1.3.6.1.4.1.4874.2.2.20.1.8.9.1not-accessiblecurrent
juniAaaSubscriberLocationLocationIndex
OBJECT-TYPE
The value of a platform interface location.
1.3.6.1.4.1.4874.2.2.20.1.8.9.1.1JuniInterfaceLocationValuenot-accessiblecurrent
juniAaaSubscriberLocationHandle
OBJECT-TYPE
The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing integer.
1.3.6.1.4.1.4874.2.2.20.1.8.9.1.2Unsigned32not-accessiblecurrent
juniAaaSubscriberLocationRowStatus
OBJECT-TYPE
Always has value 'active'.
1.3.6.1.4.1.4874.2.2.20.1.8.9.1.3RowStatusread-onlycurrent
juniAaaSubscriberPseudoPeakCount
OBJECT-TYPE
The peak number of pseudo-subscribers. The peak count includes successfully authenticated pseudo-subscribers as well as those pseudo-subscribers in the process of being authenticated. Pseudo-subscribers are those whose identities are locally configured on a dynamic link (e.g. an ATM subinterface) via the (imprecisely named) Juniper-SUBSCRIBER-MIB. Some links (e.g. IPoA) provide no link protocol with which to query the identity of a remote user. In such a case, a locally configured pseudo-subscriber can be used to conduct AAA authentication-based configuration of the dynamic link when it becomes active. Pseudo-subscribers are understood to be intended more for dynamic configuration than for actually identifying the remote user. Consequently, the pseudo-subscribers are not reflected in any of the subscriber tables defined in this MIB.
1.3.6.1.4.1.4874.2.2.20.1.8.10Gauge32read-onlycurrent
juniAaaSubscriberPseudoCount
OBJECT-TYPE
The current number of pseudo-subscribers. The pseudo-subscriber count includes successfully authenticated subscribers as well as those subscribers in the process of being authenticated. Pseudo-subscribers are those whose identities are locally configured on a dynamic link (e.g. an ATM subinterface) via the (imprecisely named) Juniper-SUBSCRIBER-MIB. Some links (e.g. IPoA) provide no link protocol with which to query the identity of a remote user. In such a case, a locally configured pseudo-subscriber can be used to conduct AAA authentication-based configuration of the dynamic link when it becomes active. Pseudo-subscribers are understood to be intended more for dynamic configuration than for actually identifying the remote user. Consequently, the pseudo-subscribers are not reflected in any of the subscriber tables defined in this MIB.
1.3.6.1.4.1.4874.2.2.20.1.8.11Gauge32read-onlycurrent
juniAaaSubscriberIpv6AddrPrefixTable
OBJECT-TYPE
The entries in this table represent IPv6 Address Prefixes by subscriber handle value.
1.3.6.1.4.1.4874.2.2.20.1.8.12not-accessiblecurrent
juniAaaSubscriberIpv6AddrPrefixEntry
OBJECT-TYPE
A specification of IPv6 Address Prefixes by subscriber handle.
1.3.6.1.4.1.4874.2.2.20.1.8.12.1not-accessiblecurrent
juniAaaSubscriberIpv6AddrPrefix
OBJECT-TYPE
The client IPv6 Address Prefix assigned to this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.12.1.1Ipv6AddressPrefixread-onlycurrent
juniAaaSubscriberIpv6AddrPrefixSize
OBJECT-TYPE
The size of the client IPv6 Address Prefix assigned to this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.12.1.2Integer32 (0..128)read-onlycurrent
juniAaaSubscriberExtTable
OBJECT-TYPE
The entries in this table represent subscribers extension attributes by subscriber handle value.
1.3.6.1.4.1.4874.2.2.20.1.8.13not-accessiblecurrent
juniAaaSubscriberExtEntry
OBJECT-TYPE
A specification of subscribers extension attributes by subscriber handle.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1not-accessiblecurrent
juniAaaSubscriberExtUserName
OBJECT-TYPE
The user name associated with this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.1DisplayStringread-onlycurrent
juniAaaSubscriberExtLoginTime
OBJECT-TYPE
The time this subscriber logged in using AAA protocol.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.2DisplayStringread-onlycurrent
juniAaaSubscriberExtIpAddress
OBJECT-TYPE
The client IP Address assigned to this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.3IpAddressread-onlycurrent
juniAaaSubscriberExtIpAddressMask
OBJECT-TYPE
The client IP Address Mask assigned to this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.4IpAddressread-onlycurrent
juniAaaSubscriberExtAddrAssignType
OBJECT-TYPE
The address assignment type for this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.5JuniAddressAssignTyperead-onlycurrent
juniAaaSubscriberExtState
OBJECT-TYPE
The state of this subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.6JuniSubscriberStateread-onlycurrent
juniAaaSubscriberExtClientType
OBJECT-TYPE
The client type for this subscriber. Certain client types (e.g., 'other') might be suppressed from representation in this table.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.7JuniSubscriberClientTyperead-onlycurrent
juniAaaSubscriberExtAcctSessionId
OBJECT-TYPE
Account session ID associated with this subscriber. The value and encoding of this attribute depends on the way AAA protocol is configured. For example it is attribute 44 for RADIUS.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.8DisplayStringread-onlycurrent
juniAaaSubscriberExtClass
OBJECT-TYPE
Classification attribute associated with this subscriber. The value and encoding of this attribute depends on the way AAA protocol is configured. For example it is attribute 25 for RADIUS.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.9DisplayStringread-onlycurrent
juniAaaSubscriberExtNasPort
OBJECT-TYPE
Associated NAS port with this subscriber. The value and encoding of this attribute depends on the way AAA protocol is configured. For example it is attribute 5 for RADIUS.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.10Unsigned32read-onlycurrent
juniAaaSubscriberExtNasPortType
OBJECT-TYPE
Associated NAS port type attribute associated with this subscriber. The value and encoding of this attribute depends on the way AAA protocol is configured. For example it is attribute 61 for RADIUS.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.11Unsigned32read-onlycurrent
juniAaaSubscriberExtCalledStationId
OBJECT-TYPE
Called ID associated with this subscriber. The value and encoding of this attribute depends on the way AAA protocol is configured. For example it is attribute 30 for RADIUS.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.12OCTET STRING (SIZE(0..255))read-onlycurrent
juniAaaSubscriberExtCallingStationId
OBJECT-TYPE
Calling ID associated with this subscriber. The value and encoding of this attribute depends on the way AAA protocol is configured. For example it is attribute 31 for RADIUS.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.13OCTET STRING (SIZE(0..255))read-onlycurrent
juniAaaSubscriberExtL2tpTunnelId
OBJECT-TYPE
L2TP Tunnel ID associated with this subscriber of concerned LNS. A value 0 for this attribute indicates the terminated subscriber.
1.3.6.1.4.1.4874.2.2.20.1.8.13.1.14Integer32 (0..65535)read-onlycurrent
juniAaaSubscriberInterfaceSummaryTable
OBJECT-TYPE
The entries in this table report number of subscribers per subscriber interface which includes the port type (1 = atm; 2 = ethernet), slot, port and sub-interface.
1.3.6.1.4.1.4874.2.2.20.1.8.14not-accessiblecurrent
juniAaaSubscriberInterfaceSummaryEntry
OBJECT-TYPE
A specification of subscribers on an subscriber interface.
1.3.6.1.4.1.4874.2.2.20.1.8.14.1not-accessiblecurrent
juniAaaSubscriberInterfaceSummaryIndex
OBJECT-TYPE
The value of a subscriber interface.
1.3.6.1.4.1.4874.2.2.20.1.8.14.1.1JuniSubscriberInterfaceValuenot-accessiblecurrent
juniAaaSubscriberSubInterfaceSummaryIndex
OBJECT-TYPE
The value of a subscriber sub-interface.
1.3.6.1.4.1.4874.2.2.20.1.8.14.1.2Integer32not-accessiblecurrent
juniAaaSubscriberInterfaceSummaryCount
OBJECT-TYPE
The number of subscribers associated with this subscriber interface.
1.3.6.1.4.1.4874.2.2.20.1.8.14.1.3Gauge32read-onlycurrent
juniAaaSubscriberInterfaceTable
OBJECT-TYPE
The subscriber entries in this table sorted by subscriber interface.
1.3.6.1.4.1.4874.2.2.20.1.8.15not-accessiblecurrent
juniAaaSubscriberInterfaceEntry
OBJECT-TYPE
An association of a subscriber to a subscriber interface.
1.3.6.1.4.1.4874.2.2.20.1.8.15.1not-accessiblecurrent
juniAaaSubscriberInterfaceIndex
OBJECT-TYPE
The value of a subscriber interface. This includes the port type (1 = ATM; 2 = Ethernet), slot, port, and sub-interface.
1.3.6.1.4.1.4874.2.2.20.1.8.15.1.1JuniSubscriberInterfaceValuenot-accessiblecurrent
juniAaaSubscriberSubInterfaceIndex
OBJECT-TYPE
The value of a subscriber sub-interface.
1.3.6.1.4.1.4874.2.2.20.1.8.15.1.2Integer32not-accessiblecurrent
juniAaaSubscriberInterfaceHandle
OBJECT-TYPE
The subscriber handle associated with this subscriber interface. A subscriber handle is a monotonically increasing integer.
1.3.6.1.4.1.4874.2.2.20.1.8.15.1.3Unsigned32not-accessiblecurrent
juniAaaSubscriberInterfaceRowStatus
OBJECT-TYPE
Always has value 'active'.
1.3.6.1.4.1.4874.2.2.20.1.8.15.1.4RowStatusread-onlycurrent
juniAaaSubscriberSlotSummaryTable
OBJECT-TYPE
The entries in this table report number of subscribers per slot.
1.3.6.1.4.1.4874.2.2.20.1.8.16not-accessiblecurrent
juniAaaSubscriberSlotSummaryEntry
OBJECT-TYPE
A specification of subscribers for a slot.
1.3.6.1.4.1.4874.2.2.20.1.8.16.1not-accessiblecurrent
juniAaaSubscriberSlotSummarySlotIndex
OBJECT-TYPE
The index of the slot.
1.3.6.1.4.1.4874.2.2.20.1.8.16.1.1Unsigned32not-accessiblecurrent
juniAaaSubscriberSlotSummaryCount
OBJECT-TYPE
The number of subscribers on this slot.
1.3.6.1.4.1.4874.2.2.20.1.8.16.1.2Gauge32read-onlycurrent
juniAaaSubscriberSlotTable
OBJECT-TYPE
The subscriber in this table sorted by slot.
1.3.6.1.4.1.4874.2.2.20.1.8.17not-accessiblecurrent
juniAaaSubscriberSlotEntry
OBJECT-TYPE
A specification of subscribers by slot.
1.3.6.1.4.1.4874.2.2.20.1.8.17.1not-accessiblecurrent
juniAaaSubscriberSlotIndex
OBJECT-TYPE
The index of the slot.
1.3.6.1.4.1.4874.2.2.20.1.8.17.1.1Unsigned32not-accessiblecurrent
juniAaaSubscriberSlotHandle
OBJECT-TYPE
The subscriber handle associated with this slot. The subscriber handle is a monotonically increasing integer.
1.3.6.1.4.1.4874.2.2.20.1.8.17.1.2Unsigned32not-accessiblecurrent
juniAaaSubscriberSlotRowStatus
OBJECT-TYPE
Always has value 'active'.
1.3.6.1.4.1.4874.2.2.20.1.8.17.1.3RowStatusread-onlycurrent
juniAaaCapabilities
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.1.9
juniAaaAccountingCapability
OBJECT-TYPE
Indicates whether this system supports AAA Accounting. The value true(1) indicate that it does, false(2) indicates that it does not.
1.3.6.1.4.1.4874.2.2.20.1.9.1TruthValueread-onlycurrent
juniAaaAddressAssignmentCapability
OBJECT-TYPE
Indicates whether this system supports AAA address assignment. The value true(1) indicates that it does, false(2) indicates that it does not.
1.3.6.1.4.1.4874.2.2.20.1.9.2TruthValueread-onlycurrent
juniAaaBrasCapability
OBJECT-TYPE
Indicates whether this system supports AAA BRAS functionality. The value true(1) indicates that it does, false(2) indicates that it does not.
1.3.6.1.4.1.4874.2.2.20.1.9.3TruthValueread-onlycurrent
juniAaaTunnelingCapability
OBJECT-TYPE
Indicates whether this system supports AAA tunneling. The value true(1) indicates that it does, false(2) indicates that it does not.
1.3.6.1.4.1.4874.2.2.20.1.9.4TruthValueread-onlycurrent
juniAaaMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.4
juniAaaMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.4.1
juniAaaMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.20.4.2

Conformance

NameOIDStatus
juniAaaCompliance
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.20.4.1.1obsolete
juniAaaCompliance2
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when new objects were added and new groupings were defined.
1.3.6.1.4.1.4874.2.2.20.4.1.2obsolete
juniAaaCompliance3
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when the juniAaaAssignDomainStripDomain object was added to the B-RAS group.
1.3.6.1.4.1.4874.2.2.20.4.1.3obsolete
juniAaaCompliance4
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when new assignment delimiter objects were added to the B-RAS group.
1.3.6.1.4.1.4874.2.2.20.4.1.4obsolete
juniAaaCompliance5
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when the subscriber and capabilities groups were added.
1.3.6.1.4.1.4874.2.2.20.4.1.5obsolete
juniAaaCompliance6
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when support was added for subscriber information by interface location.
1.3.6.1.4.1.4874.2.2.20.4.1.6obsolete
juniAaaCompliance7
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when several new objects were added.
1.3.6.1.4.1.4874.2.2.20.4.1.7obsolete
juniAaaCompliance8
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when new objects were added to the B-RAS and tunnel groups.
1.3.6.1.4.1.4874.2.2.20.4.1.8obsolete
juniAaaCompliance9
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when new objects were added to the B-RAS group.
1.3.6.1.4.1.4874.2.2.20.4.1.9obsolete
juniAaaCompliance10
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when new objects were added to the B-RAS, Subscriber and Address groups.
1.3.6.1.4.1.4874.2.2.20.4.1.10obsolete
juniAaaCompliance11
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.11obsolete
juniAaaCompliance12
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.12obsolete
juniAaaCompliance13
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.13obsolete
juniAaaCompliance14
MODULE-COMPLIANCE
The compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.14obsolete
juniAaaCompliance15
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.15obsolete
juniAaaCompliance16
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.16obsolete
juniAaaCompliance17
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.17obsolete
juniAaaCompliance18
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.18obsolete
juniAaaCompliance19
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.19obsolete
juniAaaCompliance20
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.20obsolete
juniAaaCompliance21
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when the juniAaaMonitorIngressTrafficOnly object was added to the B-RAS group.
1.3.6.1.4.1.4874.2.2.20.4.1.21obsolete
juniAaaCompliance22
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when the juniAaaAssignDomainBackupPoolName object was added to the B-RAS group.
1.3.6.1.4.1.4874.2.2.20.4.1.22obsolete
juniAaaCompliance23
MODULE-COMPLIANCE
Obsolete compliance statement for systems supporting AAA. This statement became obsolete when juniAaaFramedIpv6PrefixAsIpv6NdRaPrefix and juniAaaDelegatedIpv6PrefixAsDhcpv6DelegatedPrefix objects were added to the B-RAS group.
1.3.6.1.4.1.4874.2.2.20.4.1.23obsolete
juniAaaCompliance24
MODULE-COMPLIANCE
The compliance statement for systems supporting AAA.
1.3.6.1.4.1.4874.2.2.20.4.1.24current
juniAaaGroup
OBJECT-GROUP
Obsolete collection of objects providing management of AAA functionality in a Juniper product. This group became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.20.4.2.1obsolete
juniAaaGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of AAA functionality in a Juniper product. This group became obsolete when new objects were added and new groupings were defined.
1.3.6.1.4.1.4874.2.2.20.4.2.2obsolete
juniAaaBasicGroup
OBJECT-GROUP
The basic collection of objects providing management of AAA functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.3current
juniAaaBrasGroup
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product. This group became obsolete when the juniAaaAssignDomainStripDomain object was added.
1.3.6.1.4.1.4874.2.2.20.4.2.4obsolete
juniAaaTunnelGroup
OBJECT-GROUP
Obsolete collection of objects providing management of AAA tunneling functionality in a Juniper product. This group became obsolete when the maximum sessions object was added.
1.3.6.1.4.1.4874.2.2.20.4.2.5obsolete
juniAaaAuthenticationGroup
OBJECT-GROUP
Obsolete collection of objects providing management of AAA authentication functionality in a Juniper product. This group became obsolete when the authentication methods table was added.
1.3.6.1.4.1.4874.2.2.20.4.2.6obsolete
juniAaaAccountingGroup
OBJECT-GROUP
Obsolete collection of objects providing management of AAA accounting functionality in a Juniper product. This group became obsolete when the juniAaaAcctSendStopOnAaaDeny object was added.
1.3.6.1.4.1.4874.2.2.20.4.2.7obsolete
juniAaaAddressGroup
OBJECT-GROUP
Obsolete collection of objects providing management of AAA address assignment functionality in a Juniper product. This group became obsolete when IPv6 support was added.
1.3.6.1.4.1.4874.2.2.20.4.2.8obsolete
juniAaaBrasGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product. This group became obsolete when new assignment delimiter objects were added.
1.3.6.1.4.1.4874.2.2.20.4.2.9obsolete
juniAaaBrasGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product. This group became obsolete when new objects were added.
1.3.6.1.4.1.4874.2.2.20.4.2.10obsolete
juniAaaSubscriberGroup
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS Subscriber functionality in a Juniper product. This group became obsolete when support was added for monitoring subscriber information by interface location.
1.3.6.1.4.1.4874.2.2.20.4.2.11obsolete
juniAaaCapabilitiesGroup
OBJECT-GROUP
The collection of objects providing management of AAA Capabilities functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.12current
juniAaaSubscriberGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS Subscriber functionality in a Juniper product. This group became obsolete when the pseudo-subscriber meters were added.
1.3.6.1.4.1.4874.2.2.20.4.2.13obsolete
juniAaaAccountingGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of AAA accounting functionality in a Juniper product. This group became obsolete when the accounting methods table was added.
1.3.6.1.4.1.4874.2.2.20.4.2.14obsolete
juniAaaBrasGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product. This group became obsolete when assign domain pool name was added.
1.3.6.1.4.1.4874.2.2.20.4.2.15obsolete
juniAaaSubscriberGroup3
OBJECT-GROUP
Obsoleted collection of objects providing management of AAA B-RAS Subscriber functionality in a Juniper product. This group became obsolete when IPv6 support was added.
1.3.6.1.4.1.4874.2.2.20.4.2.16obsolete
juniAaaBrasGroup5
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product. This group became obsolete when PADN support was added.
1.3.6.1.4.1.4874.2.2.20.4.2.17obsolete
juniAaaTunnelGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of AAA tunneling functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.18obsolete
juniAaaBrasGroup6
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product. This group became obsolete when IPv6 support was added.
1.3.6.1.4.1.4874.2.2.20.4.2.19obsolete
juniAaaBrasGroup7
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.20obsolete
juniAaaAddressGroup2
OBJECT-GROUP
The collection of objects providing management of AAA address assignment functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.21current
juniAaaSubscriberGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS Subscriber functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.22obsolete
juniAaaBrasGroup8
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.23obsolete
juniAaaBrasGroup9
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.24obsolete
juniAaaTunnelGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of AAA tunneling functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.25obsolete
juniAaaAccountingGroup3
OBJECT-GROUP
Obsolete collection of objects providing management of AAA accounting functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.26obsolete
juniAaaAuthenticationGroup2
OBJECT-GROUP
Obsolete collection of objects providing management of AAA authentication functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.27obsolete
juniAaaAuthenticationGroup3
OBJECT-GROUP
The collection of objects providing management of AAA authentication functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.28current
juniAaaAccountingGroup4
OBJECT-GROUP
The collection of objects providing management of AAA accounting functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.29obsolete
juniAaaTunnelGroup4
OBJECT-GROUP
Obsolete collection of objects providing management of AAA tunneling functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.30obsolete
juniAaaSubscriberGroup5
OBJECT-GROUP
The collection of objects providing management of AAA B-RAS Subscriber functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.31current
juniAaaBrasGroup10
OBJECT-GROUP
Obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.32obsolete
juniAaaTunnelGroup5
OBJECT-GROUP
The collection of collection of objects providing management of AAA tunneling functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.33current
juniAaaBrasGroup11
OBJECT-GROUP
The obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.34obsolete
juniAaaAccountingGroup5
OBJECT-GROUP
The collection of objects providing management of AAA accounting functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.35current
juniAaaBrasGroup12
OBJECT-GROUP
The obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.36obsolete
juniAaaBrasGroup13
OBJECT-GROUP
The obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.37obsolete
juniAaaBrasGroup14
OBJECT-GROUP
The obsolete collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.38obsolete
juniAaaBrasGroup15
OBJECT-GROUP
The collection of objects providing management of AAA B-RAS functionality in a Juniper product.
1.3.6.1.4.1.4874.2.2.20.4.2.39current