JUNIPER-VPN-MIB
- Registered at
- 1.3.6.1.4.1.2636.3.26
- Last updated
- 2010-10-15 00:00
- Organization
- IETF Provider Provisioned VPNs WG
- Revisions
- 2010-10-15 00:00, 2010-08-27 00:00, 2002-04-21 21:28
- Namespace
- juniper
- Source file
JUNIPER-VPN-MIB- Digest
sha256:ff7363d5ed62bd9d639b68b4fe2acc504311b78b8e934e046fd0717d238c52b8
Description
Extended VPN MIB module to support VPN Identifier for locally switched L2 circuits.
Contact
Kireeti Kompella Postal: Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 Tel: +1 408 745 2000 E-mail: kireeti@juniper.net
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| JUNIPER-SMI | jnxMibs |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION |
Imported by
2 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB INET-ADDRESS-MIB JUNIPER-SMI JUNIPER-VPN-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| JnxVpnIdentifier TEXTUAL-CONVENTION Syntax for a VPN identifier. A VPN Identifier is always interpreted within the context of an jnxVpnIdentifierType value. The jnxVpnIdentifierType object which defines the context must be registered immediately before the object which uses the VpnIdentifier textual convention. In other words, the object identifiers for the jnxVpnIdentifierType object and the jnxVpnIdentifier object MUST have the same length and the last sub-identifier of the jnxVpnIdentifierType object MUST be 1 less than the last sub-identifier of the jnxVpnIdentifier object. | current | |||
| JnxVpnIdentifierType TEXTUAL-CONVENTION Type of the VPN Identifier. This includes Route Distinguishers, Route Targets, and VC IDs. none(0) This value MUST be used if the value of the corresponding JnxVpnIdentifier object is a zero-length string. other(1) A VPN identifier that does not match one of the types defined in this MIB. routeDistinguisher(2) A VPN identifier as defined by the JnxVpnRouteDistinguisher textual convention. routeDistinguisher0(3) A VPN identifier as defined by the JnxVpnRouteDistinguisher0 textual convention. routeDistinguisher1(4) A VPN identifier as defined by the JnxVpnRouteDistinguisher1 textual convention. routeDistinguisher2(5) A VPN identifier as defined by the JnxVpnRouteDistinguisher2 textual convention. routeTarget(6) A VPN identifier as defined by the JnxVpnRouteTarget textual convention. routeTarget0(7) A VPN identifier as defined by the JnxVpnRouteTarget0 textual convention. routeTarget1(8) A VPN identifier as defined by the JnxVpnRouteTarget1 textual convention. routeTarget2(9) A VPN identifier as defined by the JnxVpnRouteTarget2 textual convention. vcId(10) A VPN identifier as defined by the JnxVpnVCIdentifier textual convention. localSwitch(11) A VPN identifier as defined by the JnxVpnLocalSwitchIdentifier textual convention. | current | |||
| JnxVpnLocalSwitchIdentifier TEXTUAL-CONVENTION The string representing the name of two interfaces that are being locally switched separated by a colon. | current | |||
| JnxVpnMultiplexor TEXTUAL-CONVENTION Syntax for a VPN multiplexor/demultiplexor within a Pseudo-Wire Tunnel. | current | |||
| JnxVpnName TEXTUAL-CONVENTION Name of the VPN. | current | |||
| JnxVpnRouteDistinguisher TEXTUAL-CONVENTION Represents a Generic Route Distinguisher. | current | |||
| JnxVpnRouteDistinguisher0 TEXTUAL-CONVENTION Represents a Type 0 Route Distinguisher. | current | |||
| JnxVpnRouteDistinguisher1 TEXTUAL-CONVENTION Represents a Type 1 Route Distinguisher. | current | |||
| JnxVpnRouteDistinguisher2 TEXTUAL-CONVENTION Represents a Type 2 Route Distinguisher. | current | |||
| JnxVpnRouteTarget TEXTUAL-CONVENTION Represents a Generic Route Target. | current | |||
| JnxVpnRouteTarget0 TEXTUAL-CONVENTION Represents a Type 00 Route Target. | current | |||
| JnxVpnRouteTarget1 TEXTUAL-CONVENTION Represents a Type 01 Route Target. | current | |||
| JnxVpnRouteTarget2 TEXTUAL-CONVENTION Represents a Type 02 Route Target. | current | |||
| JnxVpnType TEXTUAL-CONVENTION Type of the VPN. The following types have been defined: bgpIpVpn: RFC 4364 VPNs; bgpL2Vpn: BGP-based Layer 2 VPNs (see draft-kompella-ppvpn-l2vpn); bgpVpls: BGP-based VPLS (see draft-kompella-ppvnp-vpls); l2Circuit: LDP-based point-to-point Layer 2 circuits (see RFC 4906); ldpVpls: LDP-based VPLS (see draft-lasserre-vkompella-ppvpn-vpls); opticalVpn: BGP-based Optical (port based) VPNs (see draft-ouldbrahim-bgpgmpls-ovpn); vpOxc: Virtual Private Optical Cross-Connect (see draft-ouldbrahim-ppvpn-vpoxc); ccc: proprietary Layer 2 circuit; bgpAtmVpn: ATM over MPLS (draft to be published). | current | |||
| JnxVpnVCIdentifier TEXTUAL-CONVENTION Represents a PE ID, VC ID pair. The PE ID is the Router ID of the remote PE. The VC ID follows the description given in draft-martini-l2circuit-trans. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxVpnMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.26.0 | |||
| jnxVpnMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.26.1 | |||
| jnxVpnInfo OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.26.1.1 | |||
| jnxVpnConfiguredVpns OBJECT-TYPE Number of configured VPNs. | 1.3.6.1.4.1.2636.3.26.1.1.1 | Gauge32 | read-only | current |
| jnxVpnActiveVpns OBJECT-TYPE Number of active VPNs. | 1.3.6.1.4.1.2636.3.26.1.1.2 | Gauge32 | read-only | current |
| jnxVpnNextIfIndex OBJECT-TYPE Next free VPN interface index. | 1.3.6.1.4.1.2636.3.26.1.1.3 | Unsigned32 | read-only | current |
| jnxVpnNextPwIndex OBJECT-TYPE Next free Pseudo-Wire index. | 1.3.6.1.4.1.2636.3.26.1.1.4 | Unsigned32 | read-only | current |
| jnxVpnNextRTIndex OBJECT-TYPE Next free Route Target index. | 1.3.6.1.4.1.2636.3.26.1.1.5 | Unsigned32 | read-only | current |
| jnxVpnTable OBJECT-TYPE Table of Configured VPNs. | 1.3.6.1.4.1.2636.3.26.1.2 | not-accessible | current | |
| jnxVpnEntry OBJECT-TYPE Entry containing information about a particular VPN. | 1.3.6.1.4.1.2636.3.26.1.2.1 | not-accessible | current | |
| jnxVpnType OBJECT-TYPE Type of the VPN. | 1.3.6.1.4.1.2636.3.26.1.2.1.1 | JnxVpnType | not-accessible | current |
| jnxVpnName OBJECT-TYPE Name of the VPN. This should ideally be unique in the Service Provider's domain; at a minimum, it MUST be unique per Provider Edge router. | 1.3.6.1.4.1.2636.3.26.1.2.1.2 | JnxVpnName | not-accessible | current |
| jnxVpnRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.4.1.2636.3.26.1.2.1.3 | RowStatus | read-only | current |
| jnxVpnStorageType OBJECT-TYPE This variable indicates the storage type for this object. | 1.3.6.1.4.1.2636.3.26.1.2.1.4 | StorageType | read-only | current |
| jnxVpnDescription OBJECT-TYPE String describing the VPN. | 1.3.6.1.4.1.2636.3.26.1.2.1.5 | SnmpAdminString | read-only | current |
| jnxVpnIdentifierType OBJECT-TYPE Type of the following JnxVpnIdentifier. | 1.3.6.1.4.1.2636.3.26.1.2.1.6 | JnxVpnIdentifierType | read-only | current |
| jnxVpnIdentifier OBJECT-TYPE In the case of BGP VPNs, this is the Route Distinguisher for the VPN. In the case of LDP VPNs, this is the VC ID for the circuit. A value of all zeros indicates that the neither a Route Distinguisher nor a VC ID is configured for the VPN. | 1.3.6.1.4.1.2636.3.26.1.2.1.7 | JnxVpnIdentifier | read-only | current |
| jnxVpnConfiguredSites OBJECT-TYPE The number of sites configured in the VPN. Must be set to zero if not applicable. | 1.3.6.1.4.1.2636.3.26.1.2.1.8 | Gauge32 | read-only | current |
| jnxVpnActiveSites OBJECT-TYPE The number of active sites (i.e., sites whose state is active) in the VPN. | 1.3.6.1.4.1.2636.3.26.1.2.1.9 | Gauge32 | read-only | current |
| jnxVpnLocalAddresses OBJECT-TYPE The number of addresses learned from the CE device. | 1.3.6.1.4.1.2636.3.26.1.2.1.10 | Gauge32 | read-only | current |
| jnxVpnTotalAddresses OBJECT-TYPE The total number of addresses in the VPN RIB. | 1.3.6.1.4.1.2636.3.26.1.2.1.11 | Gauge32 | read-only | current |
| jnxVpnAge OBJECT-TYPE The age (i.e., time from creation till now) of this VPN in hundredths of a second. | 1.3.6.1.4.1.2636.3.26.1.2.1.12 | TimeTicks | read-only | current |
| jnxVpnIfTable OBJECT-TYPE Table of VPN Interfaces. | 1.3.6.1.4.1.2636.3.26.1.3 | not-accessible | current | |
| jnxVpnIfEntry OBJECT-TYPE Entry containing information about a particular VPN interface. | 1.3.6.1.4.1.2636.3.26.1.3.1 | not-accessible | current | |
| jnxVpnIfVpnType OBJECT-TYPE Type of the VPN to which this interface belongs. | 1.3.6.1.4.1.2636.3.26.1.3.1.1 | JnxVpnType | accessible-for-notify | current |
| jnxVpnIfVpnName OBJECT-TYPE Name of the VPN to which this interface belongs. | 1.3.6.1.4.1.2636.3.26.1.3.1.2 | JnxVpnName | accessible-for-notify | current |
| jnxVpnIfIndex OBJECT-TYPE The index of this interface in the VPN. Each interface in the VPN is given a unique index. The RowStatus says whether a given interface (i.e., a row in this table) is valid or not. Note: this index MUST NOT be zero. | 1.3.6.1.4.1.2636.3.26.1.3.1.3 | Unsigned32 | accessible-for-notify | current |
| jnxVpnIfRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.4.1.2636.3.26.1.3.1.4 | RowStatus | read-only | current |
| jnxVpnIfStorageType OBJECT-TYPE This variable indicates the storage type for this object. | 1.3.6.1.4.1.2636.3.26.1.3.1.5 | StorageType | read-only | current |
| jnxVpnIfAssociatedPw OBJECT-TYPE Index of associated Pseudo-wire, if any, in which case the index MUST be non-zero. If none, then this index MUST be zero. | 1.3.6.1.4.1.2636.3.26.1.3.1.6 | Unsigned32 | read-only | current |
| jnxVpnIfProtocol OBJECT-TYPE Protocol running over this VPN interface. The values up to 10 are taken from draft-martini-l2circuit-trans-mpls-08.txt; the value for vpls is taken from draft-lasserre-vkompella-ppvpn-vpls-01.txt. The values from 20-23 are used when the VPN is a Layer 3 VPN. | 1.3.6.1.4.1.2636.3.26.1.3.1.7 | INTEGER {other(0), frameRelay(1), atmAal5(2), atmCell(3), ethernetVlan(4), ethernet(5), ciscoHdlc(6), ppp(7), cem(8), atmVcc(9), atmVpc(10), vpls(11), ipInterworking(12), snapInterworking(13), frameRelayPort(15), satope1(17), satopt1(18), static(20), rip(21), ospf(22), bgp(23), satope3(24), satopt3(25), cesop(26), atmTrunkNNI(129), atmTrunkUNI(130)} | read-only | current |
| jnxVpnIfInBandwidth OBJECT-TYPE Maximum bandwidth that the CE connected over this VPN i/f can send to the PE, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum. | 1.3.6.1.4.1.2636.3.26.1.3.1.8 | Unsigned32 | read-only | current |
| jnxVpnIfOutBandwidth OBJECT-TYPE Maximum bandwidth that the PE can send to the CE over this VPN interface, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum. | 1.3.6.1.4.1.2636.3.26.1.3.1.9 | Unsigned32 | read-only | current |
| jnxVpnIfStatus OBJECT-TYPE Status of this interface. | 1.3.6.1.4.1.2636.3.26.1.3.1.10 | INTEGER {unknown(0), noLocalInterface(1), disabled(2), encapsulationMismatch(3), down(4), up(5)} | read-only | current |
| jnxVpnPwTable OBJECT-TYPE Table of Pseudo-Wire Connections. | 1.3.6.1.4.1.2636.3.26.1.4 | not-accessible | current | |
| jnxVpnPwEntry OBJECT-TYPE Entry containing information about a particular VPN. | 1.3.6.1.4.1.2636.3.26.1.4.1 | not-accessible | current | |
| jnxVpnPwVpnType OBJECT-TYPE The type of the VPN to which this Pseudo-Wire belongs. | 1.3.6.1.4.1.2636.3.26.1.4.1.1 | JnxVpnType | accessible-for-notify | current |
| jnxVpnPwVpnName OBJECT-TYPE The name of the VPN to which this Pseudo-Wire belongs. | 1.3.6.1.4.1.2636.3.26.1.4.1.2 | JnxVpnName | accessible-for-notify | current |
| jnxVpnPwIndex OBJECT-TYPE The index of this Pseudo-Wire in the VPN. Each Pseudo Wire in the VPN is given a unique index. The RowStatus says whether a given Pseudo Wire (i.e., a row in this table) is valid or not. Note: this index MUST NOT be zero. | 1.3.6.1.4.1.2636.3.26.1.4.1.3 | Unsigned32 | accessible-for-notify | current |
| jnxVpnPwRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.4.1.2636.3.26.1.4.1.4 | RowStatus | read-only | current |
| jnxVpnPwStorageType OBJECT-TYPE This variable indicates the storage type for this object. | 1.3.6.1.4.1.2636.3.26.1.4.1.5 | StorageType | read-only | current |
| jnxVpnPwAssociatedInterface OBJECT-TYPE The VPN index of the interface associated with this Pseudo Wire, if any. If there is no interface associated with this Pseudo Wire, a value of zero is to be returned. | 1.3.6.1.4.1.2636.3.26.1.4.1.6 | Unsigned32 | read-only | current |
| jnxVpnPwLocalSiteId OBJECT-TYPE The local site identifier for this Pseudo-Wire. If there is no local site identifier, a value of zero is to be returned. | 1.3.6.1.4.1.2636.3.26.1.4.1.7 | Unsigned32 | read-only | current |
| jnxVpnPwRemoteSiteId OBJECT-TYPE The remote site (i.e., the site at the other end of this Pseudo-Wire) identifier. If there is no remote site identifier, a value of zero is to be returned. | 1.3.6.1.4.1.2636.3.26.1.4.1.8 | Unsigned32 | read-only | current |
| jnxVpnRemotePeIdAddrType OBJECT-TYPE The type of address assigned to the remote PE. | 1.3.6.1.4.1.2636.3.26.1.4.1.9 | InetAddressType | read-only | current |
| jnxVpnRemotePeIdAddress OBJECT-TYPE The address of the remote PE, i.e., the router at the other end of the Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.10 | InetAddress | read-only | current |
| jnxVpnPwTunnelType OBJECT-TYPE The type of the tunnel over which the Pseudo-Wire is carried. If several Pseudo-Wires can be carried in one tunnel, each Pseudo-Wire is identified by the multiplexor/ demultiplexor within this tunnel. | 1.3.6.1.4.1.2636.3.26.1.4.1.11 | INTEGER {static(1), gre(2), l2tpv3(3), ipSec(4), ldp(5), rsvpTe(6), crLdp(7)} | read-only | current |
| jnxVpnPwTunnelName OBJECT-TYPE The name of the Tunnel over which this Pseudo-Wire is carried, if any. | 1.3.6.1.4.1.2636.3.26.1.4.1.12 | SnmpAdminString | read-only | current |
| jnxVpnPwReceiveDemux OBJECT-TYPE The value of the demultiplexor that identifies received packets as belonging to this Pseudo-Wire, if any. | 1.3.6.1.4.1.2636.3.26.1.4.1.13 | JnxVpnMultiplexor | read-only | current |
| jnxVpnPwTransmitDemux OBJECT-TYPE The value of the demultiplexor that identifies transmitted packets as belonging to this Pseudo-Wire, if any. | 1.3.6.1.4.1.2636.3.26.1.4.1.14 | JnxVpnMultiplexor | read-only | current |
| jnxVpnPwStatus OBJECT-TYPE Status of the Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.15 | INTEGER {unknown(0), down(1), up(2)} | read-only | current |
| jnxVpnPwTunnelStatus OBJECT-TYPE Status of the PE-to-PE tunnel over which the Pseudo- Wire is carried. | 1.3.6.1.4.1.2636.3.26.1.4.1.16 | INTEGER {unknown(0), down(1), testing(2), up(3)} | read-only | current |
| jnxVpnPwRemoteSiteStatus OBJECT-TYPE Status of the interface at the remote end of the Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.17 | INTEGER {unknown(0), outOfRange(1), down(2), up(3)} | read-only | current |
| jnxVpnPwTimeUp OBJECT-TYPE The total time in hundredths of a second that this Pseudo-Wire has been operational. | 1.3.6.1.4.1.2636.3.26.1.4.1.18 | TimeTicks | read-only | current |
| jnxVpnPwTransitions OBJECT-TYPE The number of state transitions (up -> down and down -> up) this Tunnel has undergone. | 1.3.6.1.4.1.2636.3.26.1.4.1.19 | Gauge32 | read-only | current |
| jnxVpnPwLastTransition OBJECT-TYPE The time in hundredths of a second since the last transition occurred on this Tunnel. | 1.3.6.1.4.1.2636.3.26.1.4.1.20 | TimeTicks | read-only | current |
| jnxVpnPwPacketsSent OBJECT-TYPE The number of packets that have been sent over this Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.21 | Counter64 | read-only | current |
| jnxVpnPwOctetsSent OBJECT-TYPE The number of octets that have been sent over this Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.22 | Counter64 | read-only | current |
| jnxVpnPwPacketsReceived OBJECT-TYPE The number of packets that have been received over this Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.23 | Counter64 | read-only | current |
| jnxVpnPwOctetsReceived OBJECT-TYPE The number of octets that have been received over this Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.24 | Counter64 | read-only | current |
| jnxVpnPwLRPacketsSent OBJECT-TYPE The number of packets that have been sent over this Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.25 | Counter32 | read-only | current |
| jnxVpnPwLROctetsSent OBJECT-TYPE The number of octets that have been sent over this Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.26 | Counter32 | read-only | current |
| jnxVpnPwLRPacketsReceived OBJECT-TYPE The number of packets that have been received over this Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.27 | Counter32 | read-only | current |
| jnxVpnPwLROctetsReceived OBJECT-TYPE The number of octets that have been received over this Pseudo-Wire. | 1.3.6.1.4.1.2636.3.26.1.4.1.28 | Counter32 | read-only | current |
| jnxVpnRTTable OBJECT-TYPE Table of Route Targets for a VPN. | 1.3.6.1.4.1.2636.3.26.1.5 | not-accessible | current | |
| jnxVpnRTEntry OBJECT-TYPE Entry containing information about a particular VPN. | 1.3.6.1.4.1.2636.3.26.1.5.1 | not-accessible | current | |
| jnxVpnRTVpnType OBJECT-TYPE The type of the VPN for which this list of Route Targets are defined. | 1.3.6.1.4.1.2636.3.26.1.5.1.1 | JnxVpnType | not-accessible | current |
| jnxVpnRTVpnName OBJECT-TYPE The name of the VPN for which this list of Route Targets are defined. | 1.3.6.1.4.1.2636.3.26.1.5.1.2 | JnxVpnName | not-accessible | current |
| jnxVpnRTIndex OBJECT-TYPE The index within the list of Route Targets that specifies individual Route Targets that define the VPN. Note: this index MUST NOT be zero. | 1.3.6.1.4.1.2636.3.26.1.5.1.3 | Unsigned32 | not-accessible | current |
| jnxVpnRTRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.4.1.2636.3.26.1.5.1.4 | RowStatus | read-only | current |
| jnxVpnRTStorageType OBJECT-TYPE This variable indicates the storage type for this object. | 1.3.6.1.4.1.2636.3.26.1.5.1.5 | StorageType | read-only | current |
| jnxVpnRTType OBJECT-TYPE Type of the following Route Target. This can one of 'routeTarget[012]' or 'none'. | 1.3.6.1.4.1.2636.3.26.1.5.1.6 | JnxVpnIdentifierType | read-only | current |
| jnxVpnRT OBJECT-TYPE Route Target for the VPN. If the jnxVpnRTType is 'none', this value should be all zeros. | 1.3.6.1.4.1.2636.3.26.1.5.1.7 | JnxVpnIdentifier | read-only | current |
| jnxVpnRTFunction OBJECT-TYPE The route target export distribution type. | 1.3.6.1.4.1.2636.3.26.1.5.1.8 | INTEGER {import(1), export(2), both(3)} | read-only | current |
| jnxVpnMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.26.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| jnxVpnIfUp NOTIFICATION-TYPE A jnxVpnIfUp notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions out of the 'down' state. | 1.3.6.1.4.1.2636.3.26.0.1 | current |
| jnxVpnIfDown NOTIFICATION-TYPE A jnxVpnIfDown notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions to the 'down' state. | 1.3.6.1.4.1.2636.3.26.0.2 | current |
| jnxVpnPwUp NOTIFICATION-TYPE A jnxVpnPwUp notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions out of the 'down' state. | 1.3.6.1.4.1.2636.3.26.0.3 | current |
| jnxVpnPwDown NOTIFICATION-TYPE A jnxVpnPwDown notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions to the 'down' state. | 1.3.6.1.4.1.2636.3.26.0.4 | current |