JUNIPER-SUBSCRIBER-MIB
- Registered at
- 1.3.6.1.4.1.2636.3.64.1
- Last updated
- 2016-02-16 00:00
- Organization
- Juniper Networks, Inc.
- Revisions
- 2010-05-11 00:00, 2012-05-02 00:00, 2013-12-13 00:00, 2014-11-03 00:00, 2016-02-16 00:00
- Namespace
- juniper
- Source file
JUNIPER-SUBSCRIBER-MIB- Digest
sha256:5d2342aefbdca9c12c24ef390ae8ffbbce81a56974c2291c25da9337a7b490eb
Description
The Subscriber MIB for the Juniper Networks enterprise.
Contact
Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net
Imports
| From | Symbols |
|---|---|
| HCNUM-TC | CounterBasedGauge64 |
| IF-MIB | InterfaceIndex |
| JUNIPER-SMI | jnxSubscriberMibRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HCNUM-TC IANAifType-MIB IF-MIB JUNIPER-SMI JUNIPER-SUBSCRIBER-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| JnxSubscriberClientType TEXTUAL-CONVENTION The set of possible AAA subscriber client types: none None of the following dhcp DHCP clients only l2tp L2TP clients only ppp PPP clients only pppoe PPPoE clients only vlan VLAN clients only generic Generic clients only mobileIp Mobile Ip clients only vplsPw VPLS pseudowires only static Static clients only mlppp MLPPP clients only xauth XAUTH clients only fwauth FWAUTH clients only dot1x DOT1X clients only essm ESSM clients only l2ald L2ALD clients only gre GRE clients only vlanOob Out-of-band VLAN clients only hagTunnel Hag Tunnel clients only hagBundle Hag Bundle clients only fwa FWA clients only | current | |||
| JnxSubscriberState TEXTUAL-CONVENTION The set of possible AAA subscriber states, expressed as a bit map: init INIT state only configured CONFIGURED state only active ACTIVE state only terminated TERMINATED state only terminating TERMINATING state only unknown Unknown state | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxSubscriberObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.64.1.1 | |||
| jnxSubscriberGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.64.1.1.1 | |||
| jnxSubscriberTotalCount OBJECT-TYPE Total number of subscribers. | 1.3.6.1.4.1.2636.3.64.1.1.1.1 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberActiveCount OBJECT-TYPE Number of active subscribers. | 1.3.6.1.4.1.2636.3.64.1.1.1.2 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberTable OBJECT-TYPE The entries in this table represent subscribers. | 1.3.6.1.4.1.2636.3.64.1.1.1.3 | not-accessible | current | |
| jnxSubscriberEntry OBJECT-TYPE A specification of subscribers. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1 | not-accessible | current | |
| jnxSubscriberHandleHiWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberHandleLoWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.2 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberUserName OBJECT-TYPE The userName associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.3 | DisplayString | read-only | current |
| jnxSubscriberClientType OBJECT-TYPE The client type for this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.4 | JnxSubscriberClientType | read-only | current |
| jnxSubscriberIpAddress OBJECT-TYPE The client IP Address assigned to this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.5 | IpAddress | read-only | current |
| jnxSubscriberIpAddressMask OBJECT-TYPE The client IP Address Mask assigned to this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.6 | IpAddress | read-only | current |
| jnxSubscriberLogicalSystem OBJECT-TYPE The logical system associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.7 | OCTET STRING (SIZE(0..63)) | read-only | current |
| jnxSubscriberRoutingInstance OBJECT-TYPE The routing instance associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.8 | OCTET STRING (SIZE(0..128)) | read-only | current |
| jnxSubscriberInterface OBJECT-TYPE The textual name of the interface associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.9 | DisplayString | read-only | current |
| jnxSubscriberInterfaceType OBJECT-TYPE The type of the interface associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.10 | INTEGER {none(0), static(1), dynamic(2)} | read-only | current |
| jnxSubscriberMacAddress OBJECT-TYPE The MAC address of the interface associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.11 | MacAddress | read-only | current |
| jnxSubscriberState OBJECT-TYPE The state of this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.12 | JnxSubscriberState | read-only | current |
| jnxSubscriberLoginTime OBJECT-TYPE The time this subscriber logged in to the server. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.13 | DisplayString | read-only | current |
| jnxSubscriberAcctSessionId OBJECT-TYPE The accounting session id associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.14 | DisplayString | read-only | current |
| jnxSubscriberUnderlyingInterface OBJECT-TYPE The underlying interface associated with this subscriber interface. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.15 | DisplayString | read-only | current |
| jnxSubscriberPhysicalInterface OBJECT-TYPE The physical interface associated with this subscriber interface. | 1.3.6.1.4.1.2636.3.64.1.1.1.3.1.16 | DisplayString | read-only | current |
| jnxSubscriberInterfaceHardwareIndexTable OBJECT-TYPE The entries in this table represent subscribers Interface Hardware Index. | 1.3.6.1.4.1.2636.3.64.1.1.1.4 | not-accessible | current | |
| jnxSubscriberInterfaceHardwareIndexEntry OBJECT-TYPE A specification of subscribers. | 1.3.6.1.4.1.2636.3.64.1.1.1.4.1 | not-accessible | current | |
| jnxSubscriberInterfaceHardwareIndexHandleHiWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.1.4.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberInterfaceHardwareIndexHandleLoWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.1.4.1.2 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberInterfaceHardwareIndex OBJECT-TYPE The subscriber interface hardware index. | 1.3.6.1.4.1.2636.3.64.1.1.1.4.1.3 | Unsigned32 (0..4294967295) | read-only | current |
| jnxSubscriberPortCountTable OBJECT-TYPE The entries in this table represent each port. Each entry contains the port name and the number of active subscribers present on that port. | 1.3.6.1.4.1.2636.3.64.1.1.1.5 | not-accessible | current | |
| jnxSubscriberPortCountEntry OBJECT-TYPE A specification of Port containing the port name and the number of active subscribers on that port | 1.3.6.1.4.1.2636.3.64.1.1.1.5.1 | not-accessible | current | |
| jnxSubscriberPort OBJECT-TYPE Name of the port in string | 1.3.6.1.4.1.2636.3.64.1.1.1.5.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| jnxSubscriberPortTunneledCounter OBJECT-TYPE Number of active Tunneled subscribers present on the port | 1.3.6.1.4.1.2636.3.64.1.1.1.5.1.2 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberPortTerminatedCounter OBJECT-TYPE Number of active Tunneled subscribers present on the port | 1.3.6.1.4.1.2636.3.64.1.1.1.5.1.3 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberPortL2CrossConnectCounter OBJECT-TYPE Number of Layer-2 cross-connected subscribers present on the port | 1.3.6.1.4.1.2636.3.64.1.1.1.5.1.4 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberAccountingTable OBJECT-TYPE The entries in this table represent subscribers with accounting. | 1.3.6.1.4.1.2636.3.64.1.1.1.6 | not-accessible | current | |
| jnxSubscriberAccountingEntry OBJECT-TYPE A specification of subscribers with Accounting. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1 | not-accessible | current | |
| jnxSubscriberAccountingHandleHiWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberAccountingHandleLoWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.2 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberAccountingUserName OBJECT-TYPE The userName associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.3 | DisplayString | read-only | current |
| jnxSubscriberAccountingClientType OBJECT-TYPE The client type for this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.4 | JnxSubscriberClientType | read-only | current |
| jnxSubscriberAccountingIpAddress OBJECT-TYPE The client IP Address assigned to this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.5 | IpAddress | read-only | current |
| jnxSubscriberAccountingIpAddressMask OBJECT-TYPE The client IP Address Mask assigned to this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.6 | IpAddress | read-only | current |
| jnxSubscriberAccountingLogicalSystem OBJECT-TYPE The logical system associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.7 | OCTET STRING (SIZE(0..63)) | read-only | current |
| jnxSubscriberAccountingRoutingInstance OBJECT-TYPE The routing instance associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.8 | OCTET STRING (SIZE(0..128)) | read-only | current |
| jnxSubscriberAccountingInterface OBJECT-TYPE The textual name of the interface associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.9 | DisplayString | read-only | current |
| jnxSubscriberAccountingInterfaceType OBJECT-TYPE The type of the interface associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.10 | INTEGER {none(0), static(1), dynamic(2)} | read-only | current |
| jnxSubscriberAccountingMacAddress OBJECT-TYPE The MAC address of the interface associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.11 | MacAddress | read-only | current |
| jnxSubscriberAccountingState OBJECT-TYPE The state of this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.12 | JnxSubscriberState | read-only | current |
| jnxSubscriberAccountingLoginTime OBJECT-TYPE The time this subscriber logged in to the server. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.13 | DisplayString | read-only | current |
| jnxSubscriberAccountingAcctSessionId OBJECT-TYPE The accounting session id associated with this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.1.6.1.14 | DisplayString | read-only | current |
| jnxSubscriberAccountingTotalCount OBJECT-TYPE Total number of subscribers with accounting. | 1.3.6.1.4.1.2636.3.64.1.1.1.7 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberPicCountTable OBJECT-TYPE The entries in this table represent each PIC. Each entry contains the PIC name and the number of active subscribers present on that PIC. | 1.3.6.1.4.1.2636.3.64.1.1.1.8 | not-accessible | current | |
| jnxSubscriberPicCountEntry OBJECT-TYPE A specification of Pic containing the PIC name and the number of active subscribers on that PIC | 1.3.6.1.4.1.2636.3.64.1.1.1.8.1 | not-accessible | current | |
| jnxSubscriberPic OBJECT-TYPE Name of the PIC in string | 1.3.6.1.4.1.2636.3.64.1.1.1.8.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| jnxSubscriberPicTotalCounter OBJECT-TYPE Number of active subscribers present on the PIC | 1.3.6.1.4.1.2636.3.64.1.1.1.8.1.2 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberSlotCountTable OBJECT-TYPE The entries in this table represent each slot. Each entry contains the slot name and the number of active subscribers present on that slot. | 1.3.6.1.4.1.2636.3.64.1.1.1.9 | not-accessible | current | |
| jnxSubscriberSlotCountEntry OBJECT-TYPE A specification of Slot containing the slot name and the number of active subscribers on that slot | 1.3.6.1.4.1.2636.3.64.1.1.1.9.1 | not-accessible | current | |
| jnxSubscriberSlot OBJECT-TYPE Name of the slot in string | 1.3.6.1.4.1.2636.3.64.1.1.1.9.1.1 | DisplayString (SIZE(1..32)) | not-accessible | current |
| jnxSubscriberSlotTotalCounter OBJECT-TYPE Number of active subscribers present on the slot | 1.3.6.1.4.1.2636.3.64.1.1.1.9.1.2 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberLogicalSystemObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.64.1.1.2 | |||
| jnxSubscriberLogicalSystemTotalCount OBJECT-TYPE The number of total subscribers on the logical system. | 1.3.6.1.4.1.2636.3.64.1.1.2.1 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberLogicalSystemActiveCount OBJECT-TYPE The number of active subscribers on the logical system. | 1.3.6.1.4.1.2636.3.64.1.1.2.2 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberLogicalSystemTable OBJECT-TYPE The entries in this table sort subscribers within the logical system. The logical system name must be provided in the SNMP query. The logical system will be identified by either the context field in V3 requests, or it will be encoded in the community string in V1 or V2c requests. User can query for logical-system/routing-instance specific data by prefixing the community string with <logical-system>/<routing-instance>@, where '@' acts as a separator between community name and routing-instance name. If no logical system is specified, this table shows data for the default logical system. The name of the routing instance is ignored for this table. | 1.3.6.1.4.1.2636.3.64.1.1.2.3 | not-accessible | current | |
| jnxSubscriberLogicalSystemEntry OBJECT-TYPE A specification of subscribers within the logical system. | 1.3.6.1.4.1.2636.3.64.1.1.2.3.1 | not-accessible | current | |
| jnxSubscriberLogicalSystemHandleHiWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.2.3.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberLogicalSystemHandleLoWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.2.3.1.2 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberLogicalSystemState OBJECT-TYPE The state of this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.2.3.1.3 | JnxSubscriberState | read-only | current |
| jnxSubscriberRoutingInstanceObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.64.1.1.3 | |||
| jnxSubscriberRoutingInstanceTotalCount OBJECT-TYPE The number of total subscribers on the routing instance. | 1.3.6.1.4.1.2636.3.64.1.1.3.1 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberRoutingInstanceActiveCount OBJECT-TYPE The number of active subscribers on the routing instance. | 1.3.6.1.4.1.2636.3.64.1.1.3.2 | CounterBasedGauge64 | read-only | current |
| jnxSubscriberRoutingInstanceTable OBJECT-TYPE The entries in this table sort subscribers within routing instance. The routing instance name must be provided in the SNMP query. The routing instance will be identified by either the context field in V3 requests, or it will be encoded in the community string in V1 or V2c requests. User can query for logical-system/routing-instance specific data by prefixing the community string with <logical-system>/<routing-instance>@, where '@' acts as a separator between community name and routing-instance name. If no routing instance is specified, this table shows data for the default routing instance. The name of the logical system is ignored for this table. | 1.3.6.1.4.1.2636.3.64.1.1.3.3 | not-accessible | current | |
| jnxSubscriberRoutingInstanceEntry OBJECT-TYPE A specification of subscribers within routing instance. | 1.3.6.1.4.1.2636.3.64.1.1.3.3.1 | not-accessible | current | |
| jnxSubscriberRoutingInstanceHandleHiWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.3.3.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberRoutingInstanceHandleLoWord OBJECT-TYPE The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id. | 1.3.6.1.4.1.2636.3.64.1.1.3.3.1.2 | Unsigned32 (0..4294967295) | not-accessible | current |
| jnxSubscriberRoutingInstanceState OBJECT-TYPE The state of this subscriber. | 1.3.6.1.4.1.2636.3.64.1.1.3.3.1.3 | JnxSubscriberState | read-only | current |