MIBs Depot

JUNIPER-POWER-SUPPLY-UNIT-MIB

Registered at
1.3.6.1.4.1.2636.3.58.1
Last updated
2010-10-27 00:00
Organization
Juniper Networks, Inc.
Revisions
2010-01-27 00:00, 2010-05-13 00:00, 2010-10-27 00:00
Namespace
juniper
Source file
JUNIPER-POWER-SUPPLY-UNIT-MIB
Digest
sha256:fccaf2aff761060036a01da773a997706e60ad12dc81637e18c6ac9150e5d658

Description

The Juniper Supply Unit MIB definitions for enabling power monitoring and management of a juniper device.

Contact

Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net

Imports

FromSymbols
JUNIPER-MIBjnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index
JUNIPER-SMIjnxPsuMIBRoot
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

JUNIPER-MIB
JUNIPER-POWER-SUPPLY-UNIT-MIB
JUNIPER-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
jnxPsuNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.58.1.1
jnxPsuObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.58.1.2
jnxPsuScalars
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.58.1.2.1
jnxPsuAvailableDeviceCount
OBJECT-TYPE
Gives the number of PSU units available online in the System.
1.3.6.1.4.1.2636.3.58.1.2.1.1INTEGERread-onlycurrent
jnxPsuAvailableAveragePowerSupply
OBJECT-TYPE
Gives the total average power that the System can supply from the available online units in Watts.
1.3.6.1.4.1.2636.3.58.1.2.1.2INTEGERread-onlycurrent
jnxPsuAvailableMaxPowerSupply
OBJECT-TYPE
Gives the total maximum power that the System can supply from the available online units in Watts.
1.3.6.1.4.1.2636.3.58.1.2.1.3INTEGERread-onlycurrent
jnxPsuRedundancy
OBJECT-TYPE
PSU power redundancy configuration.
1.3.6.1.4.1.2636.3.58.1.2.1.4INTEGER {nPlusNRedundancy(1), nPlusOneRedundancy(2), none(3)}read-onlycurrent
jnxPsuChassisPowerReserved
OBJECT-TYPE
Power reserved for Chassis in Watts.
1.3.6.1.4.1.2636.3.58.1.2.1.5INTEGERread-onlycurrent
jnxPsuChassisPowerAllocated
OBJECT-TYPE
Total power allocated for chassis and all the FPCs in Watts.
1.3.6.1.4.1.2636.3.58.1.2.1.6INTEGERread-onlycurrent
jnxPsuRedundantPowerAvailable
OBJECT-TYPE
Power(in Watts) that is still available for allocation even while supporting redundancy with the present usage.
1.3.6.1.4.1.2636.3.58.1.2.1.7INTEGERread-onlycurrent
jnxPsuTotalPowerAvailable
OBJECT-TYPE
Power(in Watts) which could be made available for further allocation without supporting any redundancy with the present usage.
1.3.6.1.4.1.2636.3.58.1.2.1.8INTEGERread-onlycurrent
jnxPsuChassisPowerConsumed
OBJECT-TYPE
Total power consumed by the entire system rounded to the nearest integer. This is calculated using the PowerFactor, Current and Voltage values of each PSU that is online and connected to the System.
1.3.6.1.4.1.2636.3.58.1.2.1.9INTEGERread-onlycurrent
jnxPsuTemperatureInflow
OBJECT-TYPE
Average inflow temperature calculated from all the available input sensors on the master RE.
1.3.6.1.4.1.2636.3.58.1.2.1.10INTEGERread-onlycurrent
jnxPsuTemperatureOutflow
OBJECT-TYPE
Average outflow temperature calculated from all the available output sensors on the master RE.
1.3.6.1.4.1.2636.3.58.1.2.1.11INTEGERread-onlycurrent
jnxPsuTemperatureInflowSamples
OBJECT-TYPE
The number of samples being taken while calculating jnxPsuTemperatureInflow.
1.3.6.1.4.1.2636.3.58.1.2.1.12INTEGERread-onlycurrent
jnxPsuTemperatureOutflowSamples
OBJECT-TYPE
The number of samples being taken while calculating jnxPsuTemperatureOutflow.
1.3.6.1.4.1.2636.3.58.1.2.1.13INTEGERread-onlycurrent
jnxPsuTable
OBJECT-TYPE
A list of power entries for each PSU component.
1.3.6.1.4.1.2636.3.58.1.2.2not-accessiblecurrent
jnxPsuEntry
OBJECT-TYPE
Defines an entry in jnxPsuTable.
1.3.6.1.4.1.2636.3.58.1.2.2.1not-accessiblecurrent
jnxPsuAvgPower
OBJECT-TYPE
Buffer that contains the average power used, in Watts for each component.
1.3.6.1.4.1.2636.3.58.1.2.2.1.1INTEGERread-onlycurrent
jnxPsuMaxPower
OBJECT-TYPE
Buffer that contains the max power available, in Watts for each component.
1.3.6.1.4.1.2636.3.58.1.2.2.1.2INTEGERread-onlycurrent
jnxPsuMode
OBJECT-TYPE
Mode for each PSU component.
1.3.6.1.4.1.2636.3.58.1.2.2.1.3INTEGER {single(1), three(3)}read-onlycurrent
jnxPsuOutletCount
OBJECT-TYPE
The number of outlets (regardless of their current state) present on this psu component, default is 0.
1.3.6.1.4.1.2636.3.58.1.2.2.1.4INTEGERread-onlycurrent
jnxPsuEnvironmentTable
OBJECT-TYPE
A list of PSU Environment entries.
1.3.6.1.4.1.2636.3.58.1.2.3not-accessiblecurrent
jnxPsuEnvironmentEntry
OBJECT-TYPE
Defines an entry in jnxPsuEnvironmentTable.
1.3.6.1.4.1.2636.3.58.1.2.3.1not-accessiblecurrent
jnxPsuThermalValue
OBJECT-TYPE
Temparature at each component in degrees Celsius rounded to the nearest integer.
1.3.6.1.4.1.2636.3.58.1.2.3.1.1INTEGERread-onlycurrent
jnxPsuHumidityValue
OBJECT-TYPE
Humidity at each component in percentage.
1.3.6.1.4.1.2636.3.58.1.2.3.1.2INTEGERread-onlycurrent
jnxPsuOutletTable
OBJECT-TYPE
Gives details of each Power outlet`s state, capacity to supply power, and other details.
1.3.6.1.4.1.2636.3.58.1.2.4not-accessiblecurrent
jnxPsuOutletEntry
OBJECT-TYPE
A value contained within the OutletEntry
1.3.6.1.4.1.2636.3.58.1.2.4.1not-accessiblecurrent
jnxPsuOutletName
OBJECT-TYPE
Outlet name associated to the power supply unit for each PSU Component.
1.3.6.1.4.1.2636.3.58.1.2.4.1.1DisplayString (SIZE(0..15))read-onlycurrent
jnxPsuOutletDescription
OBJECT-TYPE
Outlet description associated to the power supply unit for each PSU Component.
1.3.6.1.4.1.2636.3.58.1.2.4.1.2DisplayString (SIZE(0..63))read-onlycurrent
jnxPsuOutletAvgPower
OBJECT-TYPE
Buffer that contains the average power used, in Watts for each component.
1.3.6.1.4.1.2636.3.58.1.2.4.1.3INTEGERread-onlycurrent
jnxPsuOutletMaxPower
OBJECT-TYPE
Buffer that contains the maximum power available, in Watts for each component.
1.3.6.1.4.1.2636.3.58.1.2.4.1.4INTEGERread-onlycurrent
jnxPsuOutletCurrent
OBJECT-TYPE
PSU output current in milliamps rounded to the nearest integer.
1.3.6.1.4.1.2636.3.58.1.2.4.1.5INTEGERread-onlycurrent
jnxPsuOutletStatus
OBJECT-TYPE
The value of the operational status for the given outlet. This can also be used to set the outlet state
1.3.6.1.4.1.2636.3.58.1.2.4.1.8INTEGER {off(0), on(1)}read-onlycurrent
jnxPsuOutletVoltage
OBJECT-TYPE
Output voltage in Volts rounded to the nearest integer.
1.3.6.1.4.1.2636.3.58.1.2.4.1.9INTEGERread-onlycurrent
jnxPsuOutletPowerFactorValue
OBJECT-TYPE
Power factor percentage of each PSU (2k/3k). Algorithm for calculation of Power Factor is below. For PowerOut values that fall in between 618.93W and 915.24W, say 700W, the appropriate PF ranges from 0.910191 & 0.917994. Following linear equation could help deduce a fairly accurate input power value. Linear equation y = mx + b (where m is the slope and b is the Y intercept) Slope m = (y2 - y1) / (x2 - x1) Y intercept b = y - mx Plugging it all together for our example: m = (915.24 - 618.93) / (0.917994 - 0.910191) = 37973.86 b = 915.24 - (37973.86 * 0.917994) = -33944.5 for 700W (y), our efficiency (x) would then be: x = (700 - (-33944.5)) / 37973.86 = 0.912326 = 91% PowerIn = 700W /0.912326 = 767.26W
1.3.6.1.4.1.2636.3.58.1.2.4.1.10INTEGERread-onlycurrent
jnxPsuOutletPowerConsumed
OBJECT-TYPE
Power Consumed by each outlet units in Watts.
1.3.6.1.4.1.2636.3.58.1.2.4.1.11INTEGERread-onlycurrent
jnxPsuFpcPowerTable
OBJECT-TYPE
A list of entries for each FPC(Flexible PIC Concentrator) giving it's assigned priority and power being allocated. More information on FPCs can be found in JUNIPER-MIB.
1.3.6.1.4.1.2636.3.58.1.2.5not-accessiblecurrent
jnxPsuFpcPowerEntry
OBJECT-TYPE
A value contained within the FpcPowerEntry
1.3.6.1.4.1.2636.3.58.1.2.5.1not-accessiblecurrent
jnxPsuFpcPowerPriority
OBJECT-TYPE
The Power budget priority assigned to the FPC. Lower number means higher priority.
1.3.6.1.4.1.2636.3.58.1.2.5.1.1INTEGERread-onlycurrent
jnxPsuFpcPowerAllocated
OBJECT-TYPE
The Power allocated to the FPC in Watts.
1.3.6.1.4.1.2636.3.58.1.2.5.1.2INTEGERread-onlycurrent