MIBs Depot

JUNIPER-PAE-EXTENSION-MIB

Registered at
1.3.6.1.4.1.2636.3.40.1.3.1
Last updated
2007-06-07 10:00
Organization
Juniper Networks, Inc.
Namespace
juniper
Source file
JUNIPER-PAE-EXTENSION-MIB
Digest
sha256:d54d6ca08f5b34e6908d6de96255797449bedfed832e3ecb73a8f2a8e49198b2

Description

This is Juniper Networks' implementation of enterprise specific MIB for IEEE802.1x PAE Extension MIB. This MIB Module supports Static MAC Authetication.

Contact

Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net

Imports

FromSymbols
IEEE8021-PAE-MIBdot1xPaePortNumber
IF-MIBInterfaceIndex
JUNIPER-EX-SMIjnxExPaeExtension
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IEEE8021-PAE-MIB
IF-MIB
JUNIPER-EX-SMI
JUNIPER-PAE-EXTENSION-MIB
JUNIPER-SMI
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
jnxPaeExtensionMIBNotification
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.40.1.3.1.0
jnxPaeExtensionMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.40.1.3.1.1
jnxAuthProfileName
OBJECT-TYPE
The Authentication Profile Name is given by this object. The access profile with this name is already defined with the radius server ip address, port and secret key.
1.3.6.1.4.1.2636.3.40.1.3.1.1.1DisplayString (SIZE(0..255))read-onlycurrent
jnxPaeAuthConfigTable
OBJECT-TYPE
A table that contains the configuration objects for the Authenticator PAE associated with each port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2not-accessiblecurrent
jnxPaeAuthConfigEntry
OBJECT-TYPE
An Entry appears in the table for each PAE Authenticator Port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1not-accessiblecurrent
jnxPaeAuthConfigMacAuthStatus
OBJECT-TYPE
This object specifies whether MAC Authentication is enabled on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.1TruthValueread-onlycurrent
jnxPaeAuthConfigGuestVlan
OBJECT-TYPE
This object specifies the Vlan to which the unauthenticated client moves to. The Vlan should exist on the switch and is user cofigurable per port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.2DisplayString (SIZE(0..255))read-onlycurrent
jnxPaeAuthConfigNumberRetries
OBJECT-TYPE
This sets the number of failed authentications on an interface before invoking the quiet period, during which no one can be authenticated on that interface.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.3Unsigned32read-onlycurrent
jnxPaeAuthConfigSupplicantMode
OBJECT-TYPE
This object specifies the supplicant mode of MAC Authentication enabled on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.4INTEGER {single(1), single-secure(2), multiple(3)}read-onlycurrent
jnxPaeAuthConfigMacRadius
OBJECT-TYPE
This object specifies the Mac-Radius mode of MAC Authentication enabled on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.5INTEGER {enable(1), disable(2)}read-onlycurrent
jnxPaeAuthConfigMacRadiusRestrict
OBJECT-TYPE
This object specifies the Mac-Radius mode of MAC Authentication enabled on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.6INTEGER {enable(1), disable(2)}read-onlycurrent
jnxPaeAuthConfigReAuthenticate
OBJECT-TYPE
This object specifies Re-Authentication is enabled or not on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.7TruthValueread-onlycurrent
jnxPaeAuthConfigQuietPeriod
OBJECT-TYPE
This object specifies Time to wait after an authentication failure on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.8Unsigned32read-onlycurrent
jnxPaeAuthConfigMaxRequests
OBJECT-TYPE
This object specifies Number of EAPOL RequestIDs to send before timing out on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.9Unsigned32read-onlycurrent
jnxPaeAuthConfigClientsRejected
OBJECT-TYPE
This object specifies VLAN name or 802.1q tag for authentication rejected clients on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.10DisplayString (SIZE(1..255))read-onlycurrent
jnxPaeAuthConfigServerTimeout
OBJECT-TYPE
This object specifies Authentication server timeout interval on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.11Unsigned32 (1..60)read-onlycurrent
jnxPaeAuthConfigSuppTimeout
OBJECT-TYPE
This object specifies Time to wait for a client response on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.12Unsigned32 (1..60)read-onlycurrent
jnxPaeAuthConfigTransmitPeriod
OBJECT-TYPE
This object specifies Interval before retransmitting initial EAPOL PDUs on the specified PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.2.1.13Unsigned32read-onlycurrent
jnxStaticMacAuthBypassTable
OBJECT-TYPE
The static MAC list provides an authentication bypass mechanism for clients connected to a port. The MAC address of the clients is first checked in a local database which is a user specified static list of MAC addresses and if a match is found, the client is assumed to be successfully authenticated and the port is opened up for it. No further authentication is done for that client. The VLAN that the client should be moved to or the interfaces on which the MAC address should be allowed from can also be optionally stored in this table. This will enable devices like printers, which do not support 802.1X, to be connected on 802.1X enabled ports. If a match is not found in the static list, 802.1X or MAC authentication is initiated. This table contains the static list of MAC addresses specified by the user.
1.3.6.1.4.1.2636.3.40.1.3.1.1.3not-accessiblecurrent
jnxStaticMacAuthBypassEntry
OBJECT-TYPE
A table entry specifies the MacAddress of the client and the Vlan the client is to be moved.
1.3.6.1.4.1.2636.3.40.1.3.1.1.3.1not-accessiblecurrent
jnxStaticMacAddress
OBJECT-TYPE
This object specifies the MAC Address of the client connected to the particular PAE port.
1.3.6.1.4.1.2636.3.40.1.3.1.1.3.1.1MacAddressnot-accessiblecurrent
jnxStaticMacVlanName
OBJECT-TYPE
This object specifies the Vlan to which the client is assigned to.
1.3.6.1.4.1.2636.3.40.1.3.1.1.3.1.2DisplayString (SIZE(0..255))read-onlycurrent
jnxStaticMacAuthBypassIfTable
OBJECT-TYPE
This table provides the list of interfaces on which each MAC Address in the jnxStaticMacAuthBypassTable can be allowed from. If it is detected on any other interface, the authentication is not bypassed.
1.3.6.1.4.1.2636.3.40.1.3.1.1.4not-accessiblecurrent
jnxStaticMacAuthBypassIfEntry
OBJECT-TYPE
For each MAC Address in the jnxStaticMacAuthBypassTable an entry is present in this table.It specifies the list of interfaces from which the specified MAC Address is allowed from.
1.3.6.1.4.1.2636.3.40.1.3.1.1.4.1not-accessiblecurrent
jnxStaticMacIfIndex
OBJECT-TYPE
This object specifies the list of interfaces from which the MAC Address is allowed from. If it is detected on any other interface, the authentication is bypassed.
1.3.6.1.4.1.2636.3.40.1.3.1.1.4.1.1InterfaceIndexread-onlycurrent