MIBs Depot

JUNIPER-MIMSTP-MIB

Registered at
1.3.6.1.4.1.2636.3.46.1
Last updated
2016-05-31 00:00
Organization
Juniper Networks, Inc.
Revisions
2007-05-03 00:00, 2007-05-24 00:00, 2007-12-18 00:00, 2016-05-31 00:00
Namespace
juniper
Source file
JUNIPER-MIMSTP-MIB
Digest
sha256:272c2e6d8b3664e0de6d38513fe4bddf3c2825df247f1e8f98f1665ea6dd942d

Description

This mib module is for Juniper Networks Proprietory Multiple Instance MSTP mib

Contact

Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net

Imports

FromSymbols
BRIDGE-MIBBridgeId, Timeout
JUNIPER-SMIjnxXstpMibs
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

7 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
IANAifType-MIB
IF-MIB
JUNIPER-MIMSTP-MIB
JUNIPER-SMI
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
EnabledStatus
TEXTUAL-CONVENTION
A simple status value for the object.
current
VlanId
TEXTUAL-CONVENTION
A 12-bit VLAN ID used in the VLAN Tag header.
current

Objects

NameOIDSyntaxAccessStatus
jnxMIDot1sJuniperMst
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.46.1.1
jnxMIMstGlobalTrace
OBJECT-TYPE
This object is used to enable Global Trace Statements in the MSTP Module.
1.3.6.1.4.1.2636.3.46.1.1.1TruthValueread-onlycurrent
jnxMIMstGlobalDebug
OBJECT-TYPE
This object is used to enable Global Debug Statements in the MSTP Module.
1.3.6.1.4.1.2636.3.46.1.1.2TruthValueread-onlycurrent
jnxMIDot1sJuniperMstTable
OBJECT-TYPE
List of per Virtual Context Mst Module Parameters.
1.3.6.1.4.1.2636.3.46.1.1.3not-accessiblecurrent
jnxMIDot1sJuniperMstEntry
OBJECT-TYPE
Virtual Context Mst Module Parameters.
1.3.6.1.4.1.2636.3.46.1.1.3.1not-accessiblecurrent
jnxMIDot1sJuniperMstContextId
OBJECT-TYPE
Identifies the Virtual Context.
1.3.6.1.4.1.2636.3.46.1.1.3.1.1Integer32 (0..65535)not-accessiblecurrent
jnxMIMstSystemControl
OBJECT-TYPE
The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all ports. The value shutdown (2) indicates that MST should be shutdown in the device on all ports. All memory should be released on all ports.
1.3.6.1.4.1.2636.3.46.1.1.3.1.2INTEGER {start(1), shutdown(2)}read-onlycurrent
jnxMIMstModuleStatus
OBJECT-TYPE
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, jnxMIMstSystemControl set to start.
1.3.6.1.4.1.2636.3.46.1.1.3.1.3EnabledStatusread-onlycurrent
jnxMIMstMaxMstInstanceNumber
OBJECT-TYPE
The Maximun number of spanning trees to be allowed. A User may limit the Number of Spanning Tree instance to be allowed in the Bridge.
1.3.6.1.4.1.2636.3.46.1.1.3.1.4Integer32 (1..64)read-onlycurrent
jnxMIMstNoOfMstiSupported
OBJECT-TYPE
Indicates Maximum number of spanning tree Instances supported.
1.3.6.1.4.1.2636.3.46.1.1.3.1.5Integer32read-onlycurrent
jnxMIMstMaxHopCount
OBJECT-TYPE
Indicates the Maximum Hop Count value. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.2636.3.46.1.1.3.1.6Integer32 (600..4000)read-onlycurrent
jnxMIMstBrgAddress
OBJECT-TYPE
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with jnxMIMstCistBridgePriority or jnxMIMstMstiBridgePriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
1.3.6.1.4.1.2636.3.46.1.1.3.1.7MacAddressread-onlycurrent
jnxMIMstCistRoot
OBJECT-TYPE
The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
1.3.6.1.4.1.2636.3.46.1.1.3.1.8BridgeIdread-onlycurrent
jnxMIMstCistRegionalRoot
OBJECT-TYPE
The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
1.3.6.1.4.1.2636.3.46.1.1.3.1.9BridgeIdread-onlycurrent
jnxMIMstCistRootCost
OBJECT-TYPE
The Cost of the path to the CIST Root as seen from this bridge.
1.3.6.1.4.1.2636.3.46.1.1.3.1.10Integer32read-onlycurrent
jnxMIMstCistRegionalRootCost
OBJECT-TYPE
The Cost of the path to the CIST Regional Root as seen from this bridge.
1.3.6.1.4.1.2636.3.46.1.1.3.1.11Integer32read-onlycurrent
jnxMIMstCistRootPort
OBJECT-TYPE
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
1.3.6.1.4.1.2636.3.46.1.1.3.1.12Integer32read-onlycurrent
jnxMIMstCistBridgePriority
OBJECT-TYPE
The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
1.3.6.1.4.1.2636.3.46.1.1.3.1.13Integer32 (0..61440)read-onlycurrent
jnxMIMstCistBridgeMaxAge
OBJECT-TYPE
The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.2636.3.46.1.1.3.1.14Timeout (600..4000)read-onlycurrent
jnxMIMstCistBridgeForwardDelay
OBJECT-TYPE
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.2636.3.46.1.1.3.1.15Timeout (400..3000)read-onlycurrent
jnxMIMstCistHoldTime
OBJECT-TYPE
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
1.3.6.1.4.1.2636.3.46.1.1.3.1.16Integer32read-onlycurrent
jnxMIMstCistMaxAge
OBJECT-TYPE
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.2636.3.46.1.1.3.1.17Timeoutread-onlycurrent
jnxMIMstCistForwardDelay
OBJECT-TYPE
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state.
1.3.6.1.4.1.2636.3.46.1.1.3.1.18Timeoutread-onlycurrent
jnxMIMstMstpUpCount
OBJECT-TYPE
The number of times MSTP Module has been enabled.
1.3.6.1.4.1.2636.3.46.1.1.3.1.19Counter32read-onlycurrent
jnxMIMstMstpDownCount
OBJECT-TYPE
The number of times MSTP Module has been disabled.
1.3.6.1.4.1.2636.3.46.1.1.3.1.20Counter32read-onlycurrent
jnxMIMstPathCostDefaultType
OBJECT-TYPE
The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 802.1t.
1.3.6.1.4.1.2636.3.46.1.1.3.1.21INTEGER {stp8021d1998(1), stp8021t2001(2)}read-onlycurrent
jnxMIMstTrace
OBJECT-TYPE
This object is used to enable Trace Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combination of trace levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set then user has to give the value for this object as 3. Setting the Trace Option to any value will cause the Debug Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive.
1.3.6.1.4.1.2636.3.46.1.1.3.1.22Integer32 (0..255)read-onlycurrent
jnxMIMstDebug
OBJECT-TYPE
This object is used to enable Debug Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer, represents a particular level of Debug. The mapping between the bit positions & the level of debug is as follows: 0 - Init and Shutdown Debug statements 1 - Management Debug statements 2 - Memory related Debug statements 3 - BPDU related Debug statements 4 - Event Handling Debug statements 5 - Timer Module Debug statements 6 - Port Information SEM Debug statements 7 - Port Receive SEM Debug statements (valid in the case of MSTP alone) 8 - Role Selection SEM Debug statements 9 - Role Transition SEM Debug statements 10 - State Transition SEM Debug statements 11 - Protocol Migration SEM Debug statements 12 - Topology Change SEM Debug statements 13 - Port Transmit SEM Debug statements 14 - Bridge Detection SEM Debug statements 15 - All Failure Debug statements 16 - Redundancy code flow Debug statements The remaining bits are unused. Combination of debug levels are also allowed. For example if the bits 0 and 1 are set, then the Debug statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set then user has to give the value for this object as 3. Setting the Debug Option to any value will cause the Trace Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive.
1.3.6.1.4.1.2636.3.46.1.1.3.1.23Integer32 (0..131071)read-onlycurrent
jnxMIMstForceProtocolVersion
OBJECT-TYPE
The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and 'mstp(3)' indicates the Multiple Spanning Tree Protocol Specified in IEEE 802.1s.
1.3.6.1.4.1.2636.3.46.1.1.3.1.24INTEGER {stpCompatible(0), rstp(2), mstp(3)}read-onlycurrent
jnxMIMstTxHoldCount
OBJECT-TYPE
The value used by the Port Transmit state machine to limit the maximum transmission rate.
1.3.6.1.4.1.2636.3.46.1.1.3.1.25INTEGER (1..10)read-onlycurrent
jnxMIMstMstiConfigIdSel
OBJECT-TYPE
The Configuration Identifier Format Selector used by the Bridge. This has a fixed value of 0 to indicate RegionName, RegionVersion are specified as in Standard.
1.3.6.1.4.1.2636.3.46.1.1.3.1.26Integer32 (0..255)read-onlycurrent
jnxMIMstMstiRegionName
OBJECT-TYPE
The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address.
1.3.6.1.4.1.2636.3.46.1.1.3.1.27OCTET STRING (SIZE(0..32))read-onlycurrent
jnxMIMstMstiRegionVersion
OBJECT-TYPE
Version of the MST Region.
1.3.6.1.4.1.2636.3.46.1.1.3.1.28Integer32 (0..65535)read-onlycurrent
jnxMIMstMstiConfigDigest
OBJECT-TYPE
The Configuration Digest value for this Region.
1.3.6.1.4.1.2636.3.46.1.1.3.1.29OCTET STRING (SIZE(0..32))read-onlycurrent
jnxMIMstBufferOverFlowCount
OBJECT-TYPE
The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event.
1.3.6.1.4.1.2636.3.46.1.1.3.1.30Counter32read-onlycurrent
jnxMIMstMemAllocFailureCount
OBJECT-TYPE
The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event.
1.3.6.1.4.1.2636.3.46.1.1.3.1.31Counter32read-onlycurrent
jnxMIMstRegionConfigChangeCount
OBJECT-TYPE
The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event.
1.3.6.1.4.1.2636.3.46.1.1.3.1.32Counter32read-onlycurrent
jnxMIMstCistBridgeRoleSelectionSemState
OBJECT-TYPE
Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context
1.3.6.1.4.1.2636.3.46.1.1.3.1.33INTEGER {initbridge(0), roleselection(1)}read-onlycurrent
jnxMIMstCistTimeSinceTopologyChange
OBJECT-TYPE
The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for Common Spanning Tree context.
1.3.6.1.4.1.2636.3.46.1.1.3.1.34TimeTicksread-onlycurrent
jnxMIMstCistTopChanges
OBJECT-TYPE
The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context.
1.3.6.1.4.1.2636.3.46.1.1.3.1.35Counter32read-onlycurrent
jnxMIMstCistNewRootBridgeCount
OBJECT-TYPE
The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event.
1.3.6.1.4.1.2636.3.46.1.1.3.1.36Counter32read-onlycurrent
jnxMIMstCistHelloTime
OBJECT-TYPE
This time value, measured in units of hundredths of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any port when it is the root of the spanning tree or trying to become so.
1.3.6.1.4.1.2636.3.46.1.1.3.1.37Timeoutread-onlycurrent
jnxMIMstCistBridgeHelloTime
OBJECT-TYPE
The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
1.3.6.1.4.1.2636.3.46.1.1.3.1.38Timeout (100..1000)read-onlycurrent
jnxMIMstCistDynamicPathcostCalculation
OBJECT-TYPE
This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed, otherwise the link speed at the time of port creation is used for calculating the path cost. In both cases if the user has configured a pathcost for the port that will be used. By default dynamic pathcost calculation is set to false.
1.3.6.1.4.1.2636.3.46.1.1.3.1.39TruthValueread-onlycurrent
jnxMIMstMstiBridgeTable
OBJECT-TYPE
Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Instances.
1.3.6.1.4.1.2636.3.46.1.1.4not-accessiblecurrent
jnxMIMstMstiBridgeEntry
OBJECT-TYPE
Entry indicating the Bridge Information.
1.3.6.1.4.1.2636.3.46.1.1.4.1not-accessiblecurrent
jnxMIMstMstiInstanceIndex
OBJECT-TYPE
Spanning Tree Instance to which the information belongs.
1.3.6.1.4.1.2636.3.46.1.1.4.1.1Integer32 (1..64)read-onlycurrent
jnxMIMstMstiBridgeRegionalRoot
OBJECT-TYPE
MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node
1.3.6.1.4.1.2636.3.46.1.1.4.1.2BridgeIdread-onlycurrent
jnxMIMstMstiBridgePriority
OBJECT-TYPE
The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
1.3.6.1.4.1.2636.3.46.1.1.4.1.3Integer32 (0..61440)read-onlycurrent
jnxMIMstMstiRootCost
OBJECT-TYPE
The Cost of the path to the MSTI Regional Root as seen by this bridge.
1.3.6.1.4.1.2636.3.46.1.1.4.1.4Integer32read-onlycurrent
jnxMIMstMstiRootPort
OBJECT-TYPE
The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge.
1.3.6.1.4.1.2636.3.46.1.1.4.1.5Integer32read-onlycurrent
jnxMIMstMstiTimeSinceTopologyChange
OBJECT-TYPE
The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.4.1.6TimeTicksread-onlycurrent
jnxMIMstMstiTopChanges
OBJECT-TYPE
The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.4.1.7Counter32read-onlycurrent
jnxMIMstMstiNewRootBridgeCount
OBJECT-TYPE
The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event.
1.3.6.1.4.1.2636.3.46.1.1.4.1.8Counter32read-onlycurrent
jnxMIMstMstiBridgeRoleSelectionSemState
OBJECT-TYPE
Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge.
1.3.6.1.4.1.2636.3.46.1.1.4.1.9INTEGER {initbridge(0), roleselection(1)}read-onlycurrent
jnxMIMstInstanceUpCount
OBJECT-TYPE
The number of times a new spanning tree instance has been created. This counter is incremented whenever a new spanning tree instance is created and also whenever a vlan is mapped to the instance. A Trap is generated on the occurence of this event.
1.3.6.1.4.1.2636.3.46.1.1.4.1.10Counter32read-onlycurrent
jnxMIMstInstanceDownCount
OBJECT-TYPE
The number of times a spanning tree instance has been deleted. This counter is incremented whenever a spanning tree instance is deleted and also whenever a vlan is unmapped from the instance. A Trap is generated on the occurence of this event.
1.3.6.1.4.1.2636.3.46.1.1.4.1.11Counter32read-onlycurrent
jnxMIMstOldDesignatedRoot
OBJECT-TYPE
The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node.
1.3.6.1.4.1.2636.3.46.1.1.4.1.12BridgeIdread-onlycurrent
jnxMIMstVlanInstanceMappingTable
OBJECT-TYPE
This table contains one entry for each instance of MSTP. This table maintains context ID as one more index to support Multiple Instances.
1.3.6.1.4.1.2636.3.46.1.1.5not-accessiblecurrent
jnxMIMstVlanInstanceMappingEntry
OBJECT-TYPE
A conceptual row containing the status of the MSTP instance.
1.3.6.1.4.1.2636.3.46.1.1.5.1not-accessiblecurrent
jnxMIMstInstanceIndex
OBJECT-TYPE
An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.
1.3.6.1.4.1.2636.3.46.1.1.5.1.1Integer32 (1..64)not-accessiblecurrent
jnxMIMstMapVlanIndex
OBJECT-TYPE
The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This object is used only for SET operation.GET Operation returns null values. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.
1.3.6.1.4.1.2636.3.46.1.1.5.1.2VlanIdread-onlycurrent
jnxMIMstUnMapVlanIndex
OBJECT-TYPE
The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get released.This object is used only for SET operation.GET Operation returns null values.
1.3.6.1.4.1.2636.3.46.1.1.5.1.3VlanIdread-onlycurrent
jnxMIMstSetVlanList
OBJECT-TYPE
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to map for this Instance. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.If a vlan is already mapped to this Instance, it may not be mapped again. This object is used only for SET operation. GET Operation returns null values.
1.3.6.1.4.1.2636.3.46.1.1.5.1.4OCTET STRING (SIZE(0..512))read-onlycurrent
jnxMIMstResetVlanList
OBJECT-TYPE
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to unmap from this Instance. A vlan may not be unmapped from this instance if it is not already mapped to this Instance. This object is used only for SET operation.GET Operation returns null values.
1.3.6.1.4.1.2636.3.46.1.1.5.1.5OCTET STRING (SIZE(0..512))read-onlycurrent
jnxMIMstInstanceVlanMapped
OBJECT-TYPE
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'.
1.3.6.1.4.1.2636.3.46.1.1.5.1.6OCTET STRING (SIZE(0..128))read-onlycurrent
jnxMIMstInstanceVlanMapped2k
OBJECT-TYPE
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
1.3.6.1.4.1.2636.3.46.1.1.5.1.7OCTET STRING (SIZE(0..128))read-onlycurrent
jnxMIMstInstanceVlanMapped3k
OBJECT-TYPE
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
1.3.6.1.4.1.2636.3.46.1.1.5.1.8OCTET STRING (SIZE(0..128))read-onlycurrent
jnxMIMstInstanceVlanMapped4k
OBJECT-TYPE
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
1.3.6.1.4.1.2636.3.46.1.1.5.1.9OCTET STRING (SIZE(0..128))read-onlycurrent
jnxMIMstCistPortTable
OBJECT-TYPE
This table contains Common Spanning Tree Port Information.
1.3.6.1.4.1.2636.3.46.1.1.6not-accessiblecurrent
jnxMIMstCistPortEntry
OBJECT-TYPE
A list of information maintained by every port for Common Spanning tree.
1.3.6.1.4.1.2636.3.46.1.1.6.1not-accessiblecurrent
jnxMIMstCistPort
OBJECT-TYPE
The Port number of the port for which this entry contains spanning tree information.
1.3.6.1.4.1.2636.3.46.1.1.6.1.1Integer32 (1..65535)not-accessiblecurrent
jnxMIMstCistPortPathCost
OBJECT-TYPE
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.2Integer32 (1..200000000)read-onlycurrent
jnxMIMstCistPortPriority
OBJECT-TYPE
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are set for Port Priority must be in steps of 16.
1.3.6.1.4.1.2636.3.46.1.1.6.1.3Integer32 (0..240)read-onlycurrent
jnxMIMstCistPortDesignatedRoot
OBJECT-TYPE
The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted.
1.3.6.1.4.1.2636.3.46.1.1.6.1.4BridgeIdread-onlycurrent
jnxMIMstCistPortDesignatedBridge
OBJECT-TYPE
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
1.3.6.1.4.1.2636.3.46.1.1.6.1.5BridgeIdread-onlycurrent
jnxMIMstCistPortDesignatedPort
OBJECT-TYPE
The Port identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.2636.3.46.1.1.6.1.6OCTET STRING (SIZE(2))read-onlycurrent
jnxMIMstCistPortAdminP2P
OBJECT-TYPE
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
1.3.6.1.4.1.2636.3.46.1.1.6.1.7INTEGER {forceTrue(0), forceFalse(1), auto(2)}read-onlycurrent
jnxMIMstCistPortOperP2P
OBJECT-TYPE
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the jnxMIMstCistPortAdminP2P object.
1.3.6.1.4.1.2636.3.46.1.1.6.1.8TruthValueread-onlycurrent
jnxMIMstCistPortAdminEdgeStatus
OBJECT-TYPE
The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.9TruthValueread-onlycurrent
jnxMIMstCistPortOperEdgeStatus
OBJECT-TYPE
The operational value of the Edge Port parameter. The object is initialized to the value of jnxMIMstCistPortAdminEdgeStatus and is set FALSE on reception of a BPDU.
1.3.6.1.4.1.2636.3.46.1.1.6.1.10TruthValueread-onlycurrent
jnxMIMstCistPortProtocolMigration
OBJECT-TYPE
Indicates the Protocol migration state of this Port. When operating in RSTP/MSTP (version >= 2) mode, writing TRUE(1) to this object forces this port to transmit MSTP BPDUs without instance information. Any other operation on this object has no effect and it always returns FALSE(2) when read.
1.3.6.1.4.1.2636.3.46.1.1.6.1.11TruthValueread-onlycurrent
jnxMIMstCistPortState
OBJECT-TYPE
Current state of the Port as defined by the Common spanning tree protocol.
1.3.6.1.4.1.2636.3.46.1.1.6.1.12INTEGER {disabled(1), discarding(2), learning(4), forwarding(5)}read-onlycurrent
jnxMIMstCistForcePortState
OBJECT-TYPE
Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's status in any of the MSTI contexts
1.3.6.1.4.1.2636.3.46.1.1.6.1.13INTEGER {disabled(0), enabled(1)}read-onlycurrent
jnxMIMstCistPortForwardTransitions
OBJECT-TYPE
Number of times this port has transitioned to the Forwarding State.
1.3.6.1.4.1.2636.3.46.1.1.6.1.14Counter32read-onlycurrent
jnxMIMstCistPortRxMstBpduCount
OBJECT-TYPE
Number of MST BPDUs received on this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.15Counter32read-onlycurrent
jnxMIMstCistPortRxRstBpduCount
OBJECT-TYPE
Number of RST BPDUs received on this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.16Counter32read-onlycurrent
jnxMIMstCistPortRxConfigBpduCount
OBJECT-TYPE
Number of Configuration BPDUs received on this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.17Counter32read-onlycurrent
jnxMIMstCistPortRxTcnBpduCount
OBJECT-TYPE
Number of TCN BPDUs received on this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.18Counter32read-onlycurrent
jnxMIMstCistPortTxMstBpduCount
OBJECT-TYPE
Number of MST BPDUs Transmitted from this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.19Counter32read-onlycurrent
jnxMIMstCistPortTxRstBpduCount
OBJECT-TYPE
Number of RST BPDUs Transmitted from this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.20Counter32read-onlycurrent
jnxMIMstCistPortTxConfigBpduCount
OBJECT-TYPE
Number of Configuration BPDUs Transmitted from this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.21Counter32read-onlycurrent
jnxMIMstCistPortTxTcnBpduCount
OBJECT-TYPE
Number of TCN BPDUs Transmitted from this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.22Counter32read-onlycurrent
jnxMIMstCistPortInvalidMstBpduRxCount
OBJECT-TYPE
Number of Invalid MST BPDUs Received on this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.23Counter32read-onlycurrent
jnxMIMstCistPortInvalidRstBpduRxCount
OBJECT-TYPE
Number of Invalid RST BPDUs Received on this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.24Counter32read-onlycurrent
jnxMIMstCistPortInvalidConfigBpduRxCount
OBJECT-TYPE
Number of Invalid Configuration BPDUs Received on this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.25Counter32read-onlycurrent
jnxMIMstCistPortInvalidTcnBpduRxCount
OBJECT-TYPE
Number of Invalid TCN BPDUs Received on this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.26Counter32read-onlycurrent
jnxMIMstCistPortTransmitSemState
OBJECT-TYPE
Indicates current State of the Port Transmit state machine.
1.3.6.1.4.1.2636.3.46.1.1.6.1.27INTEGER {transmitinit(0), transmitperiodic(1), transmitconfig(2), transmittcn(3), transmitrstp(4), idle(5)}read-onlycurrent
jnxMIMstCistPortReceiveSemState
OBJECT-TYPE
Indicates current State of the Port Receive state machine.
1.3.6.1.4.1.2636.3.46.1.1.6.1.28INTEGER {discard(0), receive(1)}read-onlycurrent
jnxMIMstCistPortProtMigrationSemState
OBJECT-TYPE
Indicates current State of the Port Protocol Migration State machine.
1.3.6.1.4.1.2636.3.46.1.1.6.1.29INTEGER {init(0), sendrstp(1), sendingrstp(2), sendstp(3), sendingstp(4)}read-onlycurrent
jnxMIMstCistProtocolMigrationCount
OBJECT-TYPE
The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/MSTP. A Trap is generated on the occurence of this event.
1.3.6.1.4.1.2636.3.46.1.1.6.1.30Counter32read-onlycurrent
jnxMIMstCistPortDesignatedCost
OBJECT-TYPE
The path cost of the Designated Port of the segment connected to this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.31Integer32read-onlycurrent
jnxMIMstCistPortRegionalRoot
OBJECT-TYPE
The unique Bridge Identifier of the bridge recorded as the CIST Regional Root Identifier in the configuration BPDUs transmitted.
1.3.6.1.4.1.2636.3.46.1.1.6.1.32BridgeIdread-onlycurrent
jnxMIMstCistPortRegionalPathCost
OBJECT-TYPE
The contribution of this port to the path cost of paths towards the CIST Regional Root which include this port.
1.3.6.1.4.1.2636.3.46.1.1.6.1.33Integer32read-onlycurrent
jnxMIMstCistSelectedPortRole
OBJECT-TYPE
Selected Port Role of the port for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.6.1.34INTEGER {disabled(0), alternate(1), backup(2), root(3), designated(4)}read-onlycurrent
jnxMIMstCistCurrentPortRole
OBJECT-TYPE
Current Port Role of the port for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.6.1.35INTEGER {disabled(0), alternate(1), backup(2), root(3), designated(4)}read-onlycurrent
jnxMIMstCistPortInfoSemState
OBJECT-TYPE
Current state of the Port Information State Machine for this port in this spanning tree context.
1.3.6.1.4.1.2636.3.46.1.1.6.1.36INTEGER {disabled(0), enabled(1), aged(2), update(3), superiordesg(4), repeatdesg(5), root(6), other(7), present(8), receive(9)}read-onlycurrent
jnxMIMstCistPortRoleTransitionSemState
OBJECT-TYPE
Current state of the Port Role Transition State Machine for this port in this spanning tree context.
1.3.6.1.4.1.2636.3.46.1.1.6.1.37INTEGER {init(0), blockport(1), blockedport(2), activeport(3)}read-onlycurrent
jnxMIMstCistPortStateTransitionSemState
OBJECT-TYPE
Current state of the Port State Transition State Machine for this port in this spanning tree context.
1.3.6.1.4.1.2636.3.46.1.1.6.1.38INTEGER {discarding(0), learning(1), forwarding(2)}read-onlycurrent
jnxMIMstCistPortTopologyChangeSemState
OBJECT-TYPE
Current state of the Topology Change State Machine for this port in this spanning tree context.
1.3.6.1.4.1.2636.3.46.1.1.6.1.39INTEGER {init(0), inactive(1), active(2), detected(3), notifiedtcn(4), notifiedtc(5), propagating(6), acknowledged(7)}read-onlycurrent
jnxMIMstCistPortHelloTime
OBJECT-TYPE
The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second.
1.3.6.1.4.1.2636.3.46.1.1.6.1.40Timeout (100..1000)read-onlycurrent
jnxMIMstCistPortOperVersion
OBJECT-TYPE
This indicates whether the Port is operationally in the Mstp mode, Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs.
1.3.6.1.4.1.2636.3.46.1.1.6.1.41INTEGER {stpCompatible(0), rstp(2), mstp(3)}read-onlycurrent
jnxMIMstCistPortEffectivePortState
OBJECT-TYPE
The effective operational state of the port for CIST. This will TRUE only when the port is operationally up in the Interface level and Protocol level for CIST. This is will be set to False for all other times.
1.3.6.1.4.1.2636.3.46.1.1.6.1.42TruthValueread-onlycurrent
jnxMIMstCistPortAutoEdgeStatus
OBJECT-TYPE
This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled.
1.3.6.1.4.1.2636.3.46.1.1.6.1.43TruthValueread-onlycurrent
jnxMIMstMstiPortTable
OBJECT-TYPE
This table contains Spanning Tree Instance Specific Port Information.
1.3.6.1.4.1.2636.3.46.1.1.7not-accessiblecurrent
jnxMIMstMstiPortEntry
OBJECT-TYPE
A list of information maintained by every port for each and every spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.7.1not-accessiblecurrent
jnxMIMstMstiPort
OBJECT-TYPE
The Port number of the port for which this entry contains spanning tree information.
1.3.6.1.4.1.2636.3.46.1.1.7.1.1Integer32 (1..65535)not-accessiblecurrent
jnxMIMstMstiPortPathCost
OBJECT-TYPE
The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
1.3.6.1.4.1.2636.3.46.1.1.7.1.2Integer32 (1..200000000)read-onlycurrent
jnxMIMstMstiPortPriority
OBJECT-TYPE
The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
1.3.6.1.4.1.2636.3.46.1.1.7.1.3Integer32 (0..240)read-onlycurrent
jnxMIMstMstiPortDesignatedRoot
OBJECT-TYPE
The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted.
1.3.6.1.4.1.2636.3.46.1.1.7.1.4BridgeIdread-onlycurrent
jnxMIMstMstiPortDesignatedBridge
OBJECT-TYPE
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
1.3.6.1.4.1.2636.3.46.1.1.7.1.5BridgeIdread-onlycurrent
jnxMIMstMstiPortDesignatedPort
OBJECT-TYPE
The Port identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.2636.3.46.1.1.7.1.6OCTET STRING (SIZE(2))read-onlycurrent
jnxMIMstMstiPortState
OBJECT-TYPE
Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) state in another instance.
1.3.6.1.4.1.2636.3.46.1.1.7.1.7INTEGER {disabled(1), discarding(2), learning(4), forwarding(5)}read-onlycurrent
jnxMIMstMstiForcePortState
OBJECT-TYPE
Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if the 'jnxMIMstCistForcePortState' is set to 'enabled' for this port
1.3.6.1.4.1.2636.3.46.1.1.7.1.8INTEGER {disabled(0), enabled(1)}read-onlycurrent
jnxMIMstMstiPortForwardTransitions
OBJECT-TYPE
Number of times this port has transitioned to the Forwarding State for specific instance.
1.3.6.1.4.1.2636.3.46.1.1.7.1.9Counter32read-onlycurrent
jnxMIMstMstiPortReceivedBPDUs
OBJECT-TYPE
Number of BPDUs received by this port for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.7.1.10Counter32read-onlycurrent
jnxMIMstMstiPortTransmittedBPDUs
OBJECT-TYPE
Number of BPDUs transmitted on this port for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.7.1.11Counter32read-onlycurrent
jnxMIMstMstiPortInvalidBPDUsRcvd
OBJECT-TYPE
Number of Invalid BPDUs received on this Port for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.7.1.12Counter32read-onlycurrent
jnxMIMstMstiPortDesignatedCost
OBJECT-TYPE
The path cost of the Designated Port of the segment connected to this port.
1.3.6.1.4.1.2636.3.46.1.1.7.1.13Integer32read-onlycurrent
jnxMIMstMstiSelectedPortRole
OBJECT-TYPE
Selected Port Role of the port for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.7.1.14INTEGER {disabled(0), alternate(1), backup(2), root(3), designated(4), master(5)}read-onlycurrent
jnxMIMstMstiCurrentPortRole
OBJECT-TYPE
Current Port Role of the port for this spanning tree instance.
1.3.6.1.4.1.2636.3.46.1.1.7.1.15INTEGER {disabled(0), alternate(1), backup(2), root(3), designated(4), master(5)}read-onlycurrent
jnxMIMstMstiPortInfoSemState
OBJECT-TYPE
Current state of the Port Information State Machine for this port in this spanning tree context.
1.3.6.1.4.1.2636.3.46.1.1.7.1.16INTEGER {disabled(0), enabled(1), aged(2), update(3), superiordesg(4), repeatdesg(5), root(6), other(7), present(8), receive(9)}read-onlycurrent
jnxMIMstMstiPortRoleTransitionSemState
OBJECT-TYPE
Current state of the Port Role Transition State Machine for this port in this spanning tree context.
1.3.6.1.4.1.2636.3.46.1.1.7.1.17INTEGER {init(0), blockport(1), blockedport(2), activeport(3)}read-onlycurrent
jnxMIMstMstiPortStateTransitionSemState
OBJECT-TYPE
Current state of the Port State Transition State Machine for this port in this spanning tree context.
1.3.6.1.4.1.2636.3.46.1.1.7.1.18INTEGER {discarding(0), learning(1), forwarding(2)}read-onlycurrent
jnxMIMstMstiPortTopologyChangeSemState
OBJECT-TYPE
Current state of the Topology Change State Machine for this port in this spanning tree context.
1.3.6.1.4.1.2636.3.46.1.1.7.1.19INTEGER {init(0), inactive(1), active(2), detected(3), notifiedtcn(4), notifiedtc(5), propagating(6), acknowledged(7)}read-onlycurrent
jnxMIMstMstiPortEffectivePortState
OBJECT-TYPE
The effective operational stae of the port for specific instance. This is will be TRUE only when the port is operationally up in the interface level and Protocol level for the specific instance. This is will be set to false at all other times.
1.3.6.1.4.1.2636.3.46.1.1.7.1.20TruthValueread-onlycurrent
jnxMIMstCistPortProtectTable
OBJECT-TYPE
Defines the jnxMIMstCist Port Table for providing extensions for Root Protect and Loop Protect to the corresponding jnxMIMstCistPortTable entry.
1.3.6.1.4.1.2636.3.46.1.1.8not-accessiblecurrent
jnxMIMstCistPortProtectEntry
OBJECT-TYPE
Defines an entry in the jnxMIMstCistPortProtectTable. This essentially augments the jnxMIMstCistPortEntry with additional objects.
1.3.6.1.4.1.2636.3.46.1.1.8.1not-accessiblecurrent
jnxMIMstCistPortRootProtectEnabled
OBJECT-TYPE
A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. This parameter should be FALSE by default.
1.3.6.1.4.1.2636.3.46.1.1.8.1.1TruthValueread-onlycurrent
jnxMIMstCistPortRootProtectState
OBJECT-TYPE
Indicates whether the port was prevented from being a root port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortRootProtectEnabled is FALSE.
1.3.6.1.4.1.2636.3.46.1.1.8.1.2INTEGER {no-error(0), root-prevented(1)}read-onlycurrent
jnxMIMstCistPortLoopProtectEnabled
OBJECT-TYPE
A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port for the CIST or any MSTI, when the received superior BPDU is aged out. This parameter should be FALSE by default.
1.3.6.1.4.1.2636.3.46.1.1.8.1.3TruthValueread-onlycurrent
jnxMIMstCistPortLoopProtectState
OBJECT-TYPE
Indicates whether a potential Loop was prevented on the port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortLoopProtectEnabled is FALSE.
1.3.6.1.4.1.2636.3.46.1.1.8.1.4INTEGER {no-error(0), loop-prevented(1)}read-onlycurrent
jnxMIMstMstiPortProtectTable
OBJECT-TYPE
Defines the jnxMIMstMsti Port Table for providing extensions for Root Protect and Loop Protect to the corresponding jnxMIMstMstiPortTable entry.
1.3.6.1.4.1.2636.3.46.1.1.9not-accessiblecurrent
jnxMIMstMstiPortProtectEntry
OBJECT-TYPE
Defines an entry in the jnxMIMstMstiPortProtectTable. This essentially augments the jnxMIMstMstiPortEntry with additional objects.
1.3.6.1.4.1.2636.3.46.1.1.9.1not-accessiblecurrent
jnxMIMstMstiPortRootProtectState
OBJECT-TYPE
Indicates whether the port was prevented from being a root port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortRootProtectEnabled is FALSE.
1.3.6.1.4.1.2636.3.46.1.1.9.1.1INTEGER {no-error(0), root-prevented(1)}read-onlycurrent
jnxMIMstMstiPortLoopProtectState
OBJECT-TYPE
Indicates whether a potential Loop was prevented on the port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortLoopProtectEnabled is FALSE.
1.3.6.1.4.1.2636.3.46.1.1.9.1.2INTEGER {no-error(0), loop-prevented(1)}read-onlycurrent
jnxMIDot1sJnxMstTrapsControl
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.46.1.2
jnxMIDot1sJnxMstSetGlobalTrapOption
OBJECT-TYPE
This object is used to enable and disable MSTP traps for memory failure or buffer failure irrespective of the context in which the failure occurs. 0 - Traps are not enabled. 1 - Memory and buffer failure traps enabled
1.3.6.1.4.1.2636.3.46.1.2.1Integer32 (0..1)read-onlycurrent
jnxMIMstGlobalErrTrapType
OBJECT-TYPE
Used within the Trap Notification PDU. It denotes general events like none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure
1.3.6.1.4.1.2636.3.46.1.2.2INTEGER {none(0), memfail(1), bufffail(2)}read-onlycurrent
jnxMIDot1sJnxMstTrapsControlTable
OBJECT-TYPE
List of per virtual bridge Trap Control Info.
1.3.6.1.4.1.2636.3.46.1.2.3not-accessiblecurrent
jnxMIDot1sJnxMstTrapsControlEntry
OBJECT-TYPE
Virtual bridge TrapsControl information.
1.3.6.1.4.1.2636.3.46.1.2.3.1not-accessiblecurrent
jnxMIMstSetTraps
OBJECT-TYPE
This object is used to enable and disable context-specific MSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol up or down 2 - Exception Traps like port protocol migration or invalid packet rcvd in port 3 - All the above Traps
1.3.6.1.4.1.2636.3.46.1.2.3.1.1Integer32 (0..3)read-onlycurrent
jnxMIMstGenTrapType
OBJECT-TYPE
Used within the Trap Notification PDU. It denotes general events like none - none of the below values up - protocol UP, down - protocol DOWN
1.3.6.1.4.1.2636.3.46.1.2.3.1.2INTEGER {none(0), up(1), down(2)}read-onlycurrent
jnxMIMstPortTrapNotificationTable
OBJECT-TYPE
This table is used to store the notification information occured in each of the port for protocol migration and invalid packet received. This table is maintained per virtual context in the system.
1.3.6.1.4.1.2636.3.46.1.2.4not-accessiblecurrent
jnxMIMstPortTrapNotificationEntry
OBJECT-TYPE
This entry is used to store the notification information
1.3.6.1.4.1.2636.3.46.1.2.4.1not-accessiblecurrent
jnxMIMstPortTrapIndex
OBJECT-TYPE
A unique value, greater than zero, indicating the Port number.
1.3.6.1.4.1.2636.3.46.1.2.4.1.1Integer32 (1..4096)read-onlycurrent
jnxMIMstPortMigrationType
OBJECT-TYPE
Port Protocol migration type occured in the port
1.3.6.1.4.1.2636.3.46.1.2.4.1.2INTEGER {sendstp(0), sendrstp(1)}read-onlycurrent
jnxMIMstPktErrType
OBJECT-TYPE
Type of invalid packet received in each of the port
1.3.6.1.4.1.2636.3.46.1.2.4.1.3INTEGER {protocolIdErr(0), invalidBpdu(1), configLengthErr(2), tcnLengthErr(3), rstpLengthErr(4), maxAgeErr(5), fwdDelayErr(6), helloTimeErr(7), mstpLengthErr(8)}read-onlycurrent
jnxMIMstPktErrVal
OBJECT-TYPE
Packet error value corresponding to the above type
1.3.6.1.4.1.2636.3.46.1.2.4.1.4INTEGERread-onlycurrent
jnxMIDot1sJuniperMstTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.46.1.3
jnxMIMstTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2636.3.46.1.3.0

Notifications

NameOIDStatus
jnxMIMstGenTrap
NOTIFICATION-TYPE
Generated when any of the general events like protocol up or protocol down occurs
1.3.6.1.4.1.2636.3.46.1.3.0.1current
jnxMIMstErrTrap
NOTIFICATION-TYPE
Generated when any of the error events like memory failure or buffer failure or protocol migration or new root or topology change occurs
1.3.6.1.4.1.2636.3.46.1.3.0.2current
jnxMIMstNewRootTrap
NOTIFICATION-TYPE
Generated whenever a new root bridge is selected in the topology. The jnxMIMstNewRootTrap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root
1.3.6.1.4.1.2636.3.46.1.3.0.3current
jnxMIMstTopologyChgTrap
NOTIFICATION-TYPE
Generated when topology change is detected
1.3.6.1.4.1.2636.3.46.1.3.0.4current
jnxMIMstProtocolMigrationTrap
NOTIFICATION-TYPE
Generated when port protocol migration happens in the port
1.3.6.1.4.1.2636.3.46.1.3.0.5current
jnxMIMstInvalidBpduRxdTrap
NOTIFICATION-TYPE
Generated when the invalid packet is received for bpdu/stp/rstp/maximum age/forward delay/hello time
1.3.6.1.4.1.2636.3.46.1.3.0.6current
jnxMIMstRegionConfigChangeTrap
NOTIFICATION-TYPE
Generated when the MST region's configuration identifier changes.
1.3.6.1.4.1.2636.3.46.1.3.0.7current
jnxMIMstCistPortRootProtectStateChangeTrap
NOTIFICATION-TYPE
Generated when the ports Root-protect state (no-error or root-prevented) for CIST changes.
1.3.6.1.4.1.2636.3.46.1.3.0.8current
jnxMIMstMstiPortRootProtectStateChangeTrap
NOTIFICATION-TYPE
Generated when the ports Root-protect state (no-error or root-prevented) an MSTI changes.
1.3.6.1.4.1.2636.3.46.1.3.0.9current
jnxMIMstCistPortLoopProtectStateChangeTrap
NOTIFICATION-TYPE
Generated when the ports Loop-protect state (no-error or loop-prevented) for CIST changes.
1.3.6.1.4.1.2636.3.46.1.3.0.10current
jnxMIMstMstiPortLoopProtectStateChangeTrap
NOTIFICATION-TYPE
Generated when the ports Loop-protect state (no-error or loop-prevented) an MSTI changes.
1.3.6.1.4.1.2636.3.46.1.3.0.11current