JUNIPER-L2CP-FEATURES-MIB
- Registered at
- 1.3.6.1.4.1.2636.3.53.1
- Last updated
- 2016-09-23 00:00
- Organization
- Juniper Networks, Inc.
- Revisions
- 2012-06-25 00:00, 2012-08-15 00:00, 2010-06-11 00:00, 2016-09-23 00:00
- Namespace
- juniper
- Source file
JUNIPER-L2CP-FEATURES-MIB- Digest
sha256:9993f7a4fb9647aed4c0c18403f62a03957788db541cea6713c4d568bd13fb1c
Description
This mib module is for Juniper Networks Proprietory Layer 2 control protocol (L2CP) features
Contact
Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | dot1dStpPort, dot1dStpPortEntry |
| IF-MIB | InterfaceIndex, ifIndex |
| JUNIPER-SMI | jnxL2cpMibRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANAifType-MIB IF-MIB JUNIPER-L2CP-FEATURES-MIB JUNIPER-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| LacpState TEXTUAL-CONVENTION The Actor and Partner State values from the LACPDU. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxL2cpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.1 | |||
| jnxL2cpStpProtectObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.1.1 | |||
| jnxDot1dStpPortProtectTable OBJECT-TYPE Defines the jnxDot1dStp Port Table for providing enterprise specific extensions for Root Protect and Loop Protect to the corresponding dot1dStpPortTable entry. | 1.3.6.1.4.1.2636.3.53.1.1.1.1 | not-accessible | current | |
| jnxDot1dStpPortProtectEntry OBJECT-TYPE Defines an entry in the jnxDot1dStpPortProtectTable. This essentially augments the dot1dStpPortTable with additional objects. | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1 | not-accessible | current | |
| jnxDot1dStpPortRootProtectEnabled OBJECT-TYPE A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port, even it has the best spanning tree priority vector. This parameter should be FALSE by default. | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.1 | TruthValue | read-only | current |
| jnxDot1dStpPortRootProtectState OBJECT-TYPE Indicates whether the port was prevented from being a root port. This parameter will always return 'no-error (0)' if jnxDot1dStpPortRootProtectEnabled is FALSE. | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.2 | INTEGER {no-error(0), root-prevented(1)} | read-only | current |
| jnxDot1dStpPortLoopProtectEnabled OBJECT-TYPE A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port when the received superior BPDU is aged out. This parameter should be FALSE by default. | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.3 | TruthValue | read-only | current |
| jnxDot1dStpPortLoopProtectState OBJECT-TYPE Indicates whether a potential Loop was prevented on the port This parameter will always return 'no-error (0)' if jnxDot1dStpPortLoopProtectEnabled is FALSE. | 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.4 | INTEGER {no-error(0), loop-prevented(1)} | read-only | current |
| jnxL2cpBpduProtectObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.1.2 | |||
| jnxL2cpBpduProtectPortTable OBJECT-TYPE Defines a Port Table for BPDU Protect information. This contains only those ports on which BPDU Protect can be configured. | 1.3.6.1.4.1.2636.3.53.1.1.2.1 | not-accessible | current | |
| jnxL2cpBpduProtectPortEntry OBJECT-TYPE Defines an entry in the jnxL2cpBpduProtectPortTable. A list containing BPDU Protect information for each Port. | 1.3.6.1.4.1.2636.3.53.1.1.2.1.1 | not-accessible | current | |
| jnxL2cpBpduProtectPortEnabled OBJECT-TYPE A Boolean value set by management indicating whether BPDU protect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a BPDU. This parameter should be FALSE by default. | 1.3.6.1.4.1.2636.3.53.1.1.2.1.1.1 | TruthValue | read-only | current |
| jnxL2cpPortBpduError OBJECT-TYPE Indicates whether a BPDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpBpduProtectPortEnabled is FALSE. | 1.3.6.1.4.1.2636.3.53.1.1.2.1.1.2 | INTEGER {no-error(0), detected(1)} | read-only | current |
| jnxL2cpBpduProtectDisableTimeout OBJECT-TYPE Returns the value of time (in seconds) after which a port on which BPDU error was detected will be re-enabled. A returned value of 0 indicates that port will not be re-enabled automatically. | 1.3.6.1.4.1.2636.3.53.1.1.2.2 | INTEGER | read-only | current |
| jnxLacpNotifyVars OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.1.3 | |||
| jnxLacpInterfaceName OBJECT-TYPE Lacp member interface. | 1.3.6.1.4.1.2636.3.53.1.1.3.1 | DisplayString | accessible-for-notify | current |
| jnxLacpifIndex OBJECT-TYPE Snmp ifIndex of member interface. | 1.3.6.1.4.1.2636.3.53.1.1.3.2 | InterfaceIndex | accessible-for-notify | current |
| jnxLacpAggregateInterfaceName OBJECT-TYPE Lacp Aggregate interface. | 1.3.6.1.4.1.2636.3.53.1.1.3.3 | DisplayString | accessible-for-notify | current |
| jnxLacpAggregateifIndex OBJECT-TYPE Snmp ifIndex of Aggregator. | 1.3.6.1.4.1.2636.3.53.1.1.3.4 | InterfaceIndex | accessible-for-notify | current |
| jnxLacpAggPortActorOperState OBJECT-TYPE Port actor operational state. | 1.3.6.1.4.1.2636.3.53.1.1.3.5 | DisplayString | accessible-for-notify | current |
| jnxLacpAggTimeout OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.1.4 | |||
| dot3adAggPortTimeoutTable OBJECT-TYPE A table that contains Link Aggregation Timeout information about a port that is associated with this device. A row appears in this table for each physical port. | 1.3.6.1.4.1.2636.3.53.1.1.4.1 | not-accessible | current | |
| dot3adAggPortTimeoutEntry OBJECT-TYPE A list of Link Aggregation Control Protocol timeout information for a port on this device. | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1 | not-accessible | current | |
| dot3adInterfaceName OBJECT-TYPE Physical port that is associated with Aggregation Port. This value is read-only. | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.1 | DisplayString | read-only | current |
| dot3adOperState OBJECT-TYPE A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only. | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.2 | LacpState | read-only | current |
| dot3adAggname OBJECT-TYPE Aggregation Port where Physical port is associated with. This value is read-only. | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.3 | DisplayString | read-only | current |
| dot3adInterfaceTimeout OBJECT-TYPE This object represents the time elapsed in seconds since lacp experienced timeout. This value is read-only. | 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.4 | TimeTicks | read-only | current |
| jnxL2cpLoopDetectObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.1.5 | |||
| jnxL2cpLoopDetectPortTable OBJECT-TYPE Defines a Port Table for Loop Detect information. This contains only those ports on which Loop Detect is configured. | 1.3.6.1.4.1.2636.3.53.1.1.5.1 | not-accessible | current | |
| jnxL2cpLoopDetectPortEntry OBJECT-TYPE Defines an entry in the jnxL2cpLoopDetectPortTable. A list containing Loop Detect information for each Port. | 1.3.6.1.4.1.2636.3.53.1.1.5.1.1 | not-accessible | current | |
| jnxL2cpLoopDetectPortEnabled OBJECT-TYPE A Boolean value set by management indicating whether Loop Detect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a Loop Detect PDU. This parameter should be FALSE by default. | 1.3.6.1.4.1.2636.3.53.1.1.5.1.1.1 | TruthValue | read-only | current |
| jnxL2cpLoopDetectPduError OBJECT-TYPE Indicates whether a Loop Detect PDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpLoopDetectPortEnabled is FALSE. | 1.3.6.1.4.1.2636.3.53.1.1.5.1.1.2 | INTEGER {no-error(0), detected(1)} | read-only | current |
| jnxL2cpNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.2 | |||
| jnxL2cpProtectTraps OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.2.0 | |||
| jnxLacpNotificationsPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.53.1.2.1 |
Notifications
| Name | OID | Status |
|---|---|---|
| jnxPortRootProtectStateChangeTrap NOTIFICATION-TYPE Generated when the ports Root-protect state (no-error or root-prevented) changes. | 1.3.6.1.4.1.2636.3.53.1.2.0.1 | current |
| jnxPortLoopProtectStateChangeTrap NOTIFICATION-TYPE Generated when the ports Loop-protect state (no-error or loop-prevented) changes. | 1.3.6.1.4.1.2636.3.53.1.2.0.2 | current |
| jnxPortBpduErrorStatusChangeTrap NOTIFICATION-TYPE Generated when the ports BPDU error state (no-error or detected) changes. | 1.3.6.1.4.1.2636.3.53.1.2.0.3 | current |
| jnxLacpTimeOut NOTIFICATION-TYPE Lacp times out | 1.3.6.1.4.1.2636.3.53.1.2.1.1 | current |