JUNIPER-IFOPTICS-MIB
- Registered at
- 1.3.6.1.4.1.2636.3.71.11.3.6.1.4.1.2636.4.22.01.3.6.1.4.1.2636.4.28.01.3.6.1.4.1.2636.4.29.0
- Last updated
- 2018-05-02 00:00
- Organization
- Juniper Networks, Inc.
- Revisions
- 2016-09-28 00:00, 2016-09-12 20:18, 2015-06-24 12:42, 2012-01-26 00:00, 2012-01-26 00:00, 2016-05-31 00:00, 2018-05-02 00:00, 2018-08-09 00:00
- Namespace
- juniper
- Source file
JUNIPER-IFOPTICS-MIB- Digest
sha256:eeb1900275d7b0b1f9eabf96ee6f50111a48b4ec0decfee524d8498f46cd2669
Description
Deprecated OCh2 related tables and entries
Contact
Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifDescr, ifIndex |
| JUNIPER-SMI | jnxIlaNotifications, jnxIplcNotifications, jnxOpticsMibRoot, jnxOpticsNotifications |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB JUNIPER-IFOPTICS-MIB JUNIPER-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| JnxIlaNotificationId TEXTUAL-CONVENTION Ila alarm types | current | |||
| JnxIplcNotificationId TEXTUAL-CONVENTION Iplc alarm types | current | |||
| JnxOpticsChannelSpacing TEXTUAL-CONVENTION Channel spacing 1 - 100 Ghz 2 - 50 GHz 3 - 25 GHz 4 - 12.5 GHz 5 - 6.25 Ghz | current | |||
| JnxOpticsDirection TEXTUAL-CONVENTION Indicates the direction as Rx/Tx or bi-directional. | current | |||
| JnxOpticsLocation TEXTUAL-CONVENTION Near End or Far End | current | |||
| JnxOpticsNotificationId TEXTUAL-CONVENTION Optic alarm types | current | |||
| JnxOpticsOTIfAdminStates TEXTUAL-CONVENTION Admin states for an interface | current | |||
| JnxOpticsOTIfEncodingOptions TEXTUAL-CONVENTION Encoding Options supported on OT interface | current | |||
| JnxOpticsOTIfFecType TEXTUAL-CONVENTION fec modes of an interface OT interface | current | |||
| JnxOpticsOTIfOperStates TEXTUAL-CONVENTION Operational states for an interface | current | |||
| JnxOpticsServiceStateAction TEXTUAL-CONVENTION Notification's action on the service state | current | |||
| JnxOpticsSeverity TEXTUAL-CONVENTION Severity of the Notification | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxOptics OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.71.1.1 | |||
| jnxOpticsConfigTable OBJECT-TYPE Information about the optics config Table. | 1.3.6.1.4.1.2636.3.71.1.1.1 | not-accessible | current | |
| jnxOpticsConfigEntry OBJECT-TYPE A conceptual row that contains information about the optics config Table. | 1.3.6.1.4.1.2636.3.71.1.1.1.1 | not-accessible | current | |
| jnxOpticsConfigContainerIndex OBJECT-TYPE The associated jnxContentsContainerIndex - eg shelf.. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.1 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsConfigL1Index OBJECT-TYPE The level one index associated with this subject ... eg fpc slot. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.2 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsConfigL2Index OBJECT-TYPE The level two index associated with this subject .. eg pic slot. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.3 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsConfigL3Index OBJECT-TYPE The level three index associated with this subject.. eg port. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.4 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsType OBJECT-TYPE 0 - none 1 - SFP 2 - XFP 3 - SFP+ 4 - XFP+ 5 - CFP 6 - CFP+ 7 - Non pluggable 8 - QSFP DWDM | 1.3.6.1.4.1.2636.3.71.1.1.1.1.5 | Integer32 | read-only | current |
| jnxLaserEnable OBJECT-TYPE 0 - laser off 1 - laser on | 1.3.6.1.4.1.2636.3.71.1.1.1.1.6 | TruthValue | read-write | current |
| jnxWavelength OBJECT-TYPE The transmit wavelength of the laser. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.7 | Unsigned32 | read-write | current |
| jnxSpacing OBJECT-TYPE A minimum nominal difference in frequency (GHz) between two adjacent channels. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.8 | JnxOpticsChannelSpacing | read-only | current |
| jnxModulation OBJECT-TYPE Modulation Unknown - (1), NonPSK - (2), ODB - (3), DPSK - (4), QPSK - (5), DQPSK - (6), DPQPSK - (7), 16QAM - (8), 64QAM - (9), 256QAM - (10) | 1.3.6.1.4.1.2636.3.71.1.1.1.1.9 | Unsigned32 | read-only | current |
| jnxTxOpticalPower OBJECT-TYPE Transmit optical power. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.10 | Integer32 | read-write | current |
| jnxRxOpticalPower OBJECT-TYPE Receive optical power. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.11 | Integer32 | read-only | current |
| jnxModuleTempHighThresh OBJECT-TYPE High module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.12 | Integer32 | read-only | current |
| jnxModuleTempLowThresh OBJECT-TYPE Low module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.13 | Integer32 | read-only | current |
| jnxTxPowerHighThresh OBJECT-TYPE Tx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.14 | Integer32 | read-write | current |
| jnxTxPowerLowThresh OBJECT-TYPE Tx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.15 | Integer32 | read-write | current |
| jnxRxPowerHighThresh OBJECT-TYPE Rx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.16 | Integer32 | read-write | current |
| jnxRxPowerLowThresh OBJECT-TYPE Rx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.17 | Integer32 | read-write | current |
| jnx24HourModuleTempHighThresh OBJECT-TYPE High module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.18 | Integer32 | read-only | current |
| jnx24HourModuleTempLowThresh OBJECT-TYPE Low module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.19 | Integer32 | read-only | current |
| jnx24HourTxPowerHighThresh OBJECT-TYPE Tx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.20 | Integer32 | read-write | current |
| jnx24HourTxPowerLowThresh OBJECT-TYPE Tx for a 24 hour period Power below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.21 | Integer32 | read-write | current |
| jnx24HourRxPowerHighThresh OBJECT-TYPE Rx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.22 | Integer32 | read-write | current |
| jnx24HourRxPowerLowThresh OBJECT-TYPE Rx Power for a 24 hour period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.23 | Integer32 | read-write | current |
| jnxRxLosPowerWarningThresh OBJECT-TYPE Rx Power warning threshold for seeting the optical LOS warning. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.24 | Integer32 | read-write | current |
| jnxRxLosPowerAlarmThresh OBJECT-TYPE Rx Power alarm threshold for seeting the optical LOS warning. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.25 | Integer32 | read-write | current |
| jnxOpticsCurrentStatus OBJECT-TYPE | 1.3.6.1.4.1.2636.3.71.1.1.1.1.26 | Bits {opticalLos(1), wavelenthLockErr(2), powerHighAlarm(3), powerLowAlarm(4), biasCurrentHighAlarm(5), biasCurrentLowAlarm(6), temperatureHighAlarm(7), temperaturelowAlarm(8), txPLLLockAlarm(9), rxPLLLockAlarm(10), avgPowerAlarm(11), rxLossAvgPowerAlarm(12), lossofACPowerAlarm(13), txPowerHighThreshAlert(14), txPowerLowThreshAlert(15), rxPowerHighThreshAlert(16), rxPowerLowThreshAlert(17), moduleTempHighThreshAlert(18), moduleTempLowThreshAlert(19), txPowerHigh24HourThreshAlert(20), txPowerLow24HourThreshAlert(21), rxPowerHigh24HourThreshAlert(22), rxPowerLow24HourThreshAlert(23), moduleTempHigh24HourThreshAlert(24), moduleTempLow24HourThreshAlert(25), powerRxHighAlarm(26), powerRxLowAlarm(27), powerTxHighWarning(28), powerTxLowWarning(29), powerRxHighWarning(30), powerRxLowWarning(31), temperatureHighWarning(32), temperaturelowWarning(33)} | read-only | current |
| jnxTxPowerHighEnableTCA OBJECT-TYPE Enable/Disable for the Tx Power High TCA. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.27 | TruthValue | read-write | current |
| jnxTxPowerLowEnableTCA OBJECT-TYPE Enable/Disable for the Tx Power Low TCA. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.28 | TruthValue | read-write | current |
| jnxRxPowerHighEnableTCA OBJECT-TYPE Enable/Disable for the Rx Power High TCA. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.29 | TruthValue | read-write | current |
| jnxRxPowerLowEnableTCA OBJECT-TYPE Enable/Disable for the Rx Power Low TCA. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.30 | TruthValue | read-write | current |
| jnxModuleTempHighEnableTCA OBJECT-TYPE Enable/Disable for the Module Temp High TCA. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.31 | TruthValue | read-write | current |
| jnxModuleTempLowEnableTCA OBJECT-TYPE Enable/Disable for the Module Temp Low TCA. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.32 | TruthValue | read-write | current |
| jnxCarFreqOffsetHighEnableTCA OBJECT-TYPE Enable/Disable for the Carrier Frequency Offset High TCA. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.33 | TruthValue | read-write | current |
| jnxCarFreqOffsetLowEnableTCA OBJECT-TYPE Enable/Disable for the CarrierFreqOffetLow TCA's. | 1.3.6.1.4.1.2636.3.71.1.1.1.1.34 | TruthValue | read-write | current |
| jnxCarFreqOffsetHighThresh OBJECT-TYPE Carrier frequency offset for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.35 | Integer32 | read-write | current |
| jnx24HourCarFreqOffsetHighThresh OBJECT-TYPE Carrier frequency offset for a 24 Hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.36 | Integer32 | read-write | current |
| jnxCarFreqOffsetLowThresh OBJECT-TYPE Carrier frequency offset for a 15 minute period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.37 | Integer32 | read-write | current |
| jnx24HourCarFreqOffsetLowThresh OBJECT-TYPE Carrier frequency offset for a 24 Hour period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.1.1.1.38 | Integer32 | read-write | current |
| jnxOpticsTraceToneCfgTable OBJECT-TYPE Information about the optics tests. | 1.3.6.1.4.1.2636.3.71.1.1.2 | not-accessible | current | |
| jnxOpticsTraceToneCfgEntry OBJECT-TYPE Information about the optics FRU's. | 1.3.6.1.4.1.2636.3.71.1.1.2.1 | not-accessible | current | |
| jnxOpticsTraceToneCfgContainerIndex OBJECT-TYPE The associated jnxContentsContainerIndex - eg shelf.. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.1 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsTraceToneCfgL1Index OBJECT-TYPE The level one index associated with this subject ... eg fpc slot. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.2 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsTraceToneCfgL2Index OBJECT-TYPE The level two index associated with this subject .. eg pic slot. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.3 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsTraceToneCfgL3Index OBJECT-TYPE The level three index associated with this subject.. eg port. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.4 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsTraceToneCfgTxEnable OBJECT-TYPE This will enable/disable the transmit Trace tone feature. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.5 | TruthValue | read-write | current |
| jnxOpticsTraceToneCfgRxEnable OBJECT-TYPE This will enable/disable the receive Trace tone feature. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.6 | TruthValue | read-write | current |
| jnxOpticsTraceToneCfgDestId OBJECT-TYPE This is the destination Id of the link ID/ the chassis and the blade. The transmit messages will also have the src id which is this chassis id and this port info. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.7 | OCTET STRING | read-write | current |
| jnxOpticsTraceToneCfgTxMsg OBJECT-TYPE This will be the transmit data in the tracetone message. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.8 | OCTET STRING | read-write | current |
| jnxOpticsTraceToneCfgRxMsg OBJECT-TYPE This will be the receive data in the trace tone message. | 1.3.6.1.4.1.2636.3.71.1.1.2.1.9 | OCTET STRING | read-only | current |
| jnxOpticsNotificationTrigDefaultHoldtimeUp OBJECT-TYPE This object will indicate the time (ms) for the defect to persist before it is declared an alarm. | 1.3.6.1.4.1.2636.3.71.1.1.3 | Integer32 | read-write | current |
| jnxOpticsNotificationTrigDefaultHoldtimeDown OBJECT-TYPE This object will indicate the time (ms) for the defect to absent before the alarm is cleared. | 1.3.6.1.4.1.2636.3.71.1.1.4 | Integer32 | read-write | current |
| jnxOpticsNotificationTrigTable OBJECT-TYPE Information about the otn Alarm/Alart/Info trigger table. | 1.3.6.1.4.1.2636.3.71.1.1.5 | not-accessible | current | |
| jnxOpticsNotificationTrigEntry OBJECT-TYPE A conceptual row that contains information about the Otn Alarm Trigger Table. | 1.3.6.1.4.1.2636.3.71.1.1.5.1 | not-accessible | current | |
| jnxOpticsNotificationTrigContainerIndex OBJECT-TYPE The associated jnxContentsContainerIndex - eg shelf. | 1.3.6.1.4.1.2636.3.71.1.1.5.1.1 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsNotificationTrigL1Index OBJECT-TYPE The level one index associated with this subject ... eg fpc slot. | 1.3.6.1.4.1.2636.3.71.1.1.5.1.2 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsNotificationTrigL2Index OBJECT-TYPE The level two index associated with this subject .. eg pic slot. | 1.3.6.1.4.1.2636.3.71.1.1.5.1.3 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsNotificationTrigL3Index OBJECT-TYPE The level three index associated with this subject.. eg port. | 1.3.6.1.4.1.2636.3.71.1.1.5.1.4 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsNotificationTrigAlmId OBJECT-TYPE This will be the type of Alarm as defined by JnxOpticsNotificationId | 1.3.6.1.4.1.2636.3.71.1.1.5.1.5 | JnxOpticsNotificationId | not-accessible | current |
| jnxOpticsNotificationTrigSeverity OBJECT-TYPE This will be the Severity of the Notification. | 1.3.6.1.4.1.2636.3.71.1.1.5.1.6 | JnxOpticsSeverity | read-write | current |
| jnxOpticsNotificationTrigIgnore OBJECT-TYPE This object will ignore the alarm when set. | 1.3.6.1.4.1.2636.3.71.1.1.5.1.7 | TruthValue | read-write | current |
| jnxOpticsNotificationTrigHoldtimeUp OBJECT-TYPE This object will indicate the time (ms) for the defect to persist before it is declared an alarm. | 1.3.6.1.4.1.2636.3.71.1.1.5.1.8 | Integer32 | read-write | current |
| jnxOpticsNotificationTrigHoldtimeDown OBJECT-TYPE This object will indicate the time (ms) the defect is absent before the alarm is cleared. | 1.3.6.1.4.1.2636.3.71.1.1.5.1.9 | Integer32 | read-write | current |
| jnxOpticsTrigServiceStateAction OBJECT-TYPE This will indicate whether this alarm is service affecting or not . | 1.3.6.1.4.1.2636.3.71.1.1.5.1.10 | JnxOpticsServiceStateAction | read-only | current |
| jnxOpticsClearAllPMs OBJECT-TYPE To clear all optics Performance monitoring counters on all interfaces. | 1.3.6.1.4.1.2636.3.71.1.1.6 | TruthValue | read-write | current |
| jnxOpticsClearIfPMsTable OBJECT-TYPE To clear optics Performance monitoring counters on this interfaces | 1.3.6.1.4.1.2636.3.71.1.1.7 | not-accessible | current | |
| jnxOpticsClearIfPMsEntry OBJECT-TYPE A conceptual row that s used to clear the Optics PM Table. | 1.3.6.1.4.1.2636.3.71.1.1.7.1 | not-accessible | current | |
| jnxOpticsClearCurrent OBJECT-TYPE 1- to clear all the Current Optics PM's for this interface | 1.3.6.1.4.1.2636.3.71.1.1.7.1.1 | TruthValue | read-write | current |
| jnxOpticsClearInterfaceInterval OBJECT-TYPE 1- to clear all the Optics PM's intervals(1-96) for this interface | 1.3.6.1.4.1.2636.3.71.1.1.7.1.2 | TruthValue | read-write | current |
| jnxOpticsClearInterfaceDay OBJECT-TYPE 1 - to clear all the Current Day and Previous Day Optics PM's for this interface | 1.3.6.1.4.1.2636.3.71.1.1.7.1.3 | TruthValue | read-write | current |
| jnxOpticsClearInterfaceAll OBJECT-TYPE 1 - to clear all the Optics PM's for this interface | 1.3.6.1.4.1.2636.3.71.1.1.7.1.4 | TruthValue | read-write | current |
| jnxOpticsOTIfConfigTable OBJECT-TYPE Information about the OT interface optics config Table. | 1.3.6.1.4.1.2636.3.71.1.1.8 | not-accessible | current | |
| jnxOpticsOTIfConfigEntry OBJECT-TYPE A conceptual row that contains information about the OT interface optics config Table. | 1.3.6.1.4.1.2636.3.71.1.1.8.1 | not-accessible | current | |
| jnxOpticsOTIfConfigContainerIndex OBJECT-TYPE The associated jnxContentsContainerIndex - eg shelf.. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.1 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsOTIfConfigL1Index OBJECT-TYPE The level one index associated with this subject ... eg fpc slot. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.2 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsOTIfConfigL2Index OBJECT-TYPE The level two index associated with this subject .. eg pic slot. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.3 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsOTIfConfigL3Index OBJECT-TYPE The level three index associated with this subject.. eg port. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.4 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsOTIfLaserEnable OBJECT-TYPE 0 - laser off 1 - laser on | 1.3.6.1.4.1.2636.3.71.1.1.8.1.5 | TruthValue | read-write | current |
| jnxOpticsOTIfFecMode OBJECT-TYPE This parameter indicates what FEC type in the OTU frame | 1.3.6.1.4.1.2636.3.71.1.1.8.1.6 | JnxOpticsOTIfFecType | read-write | current |
| jnxOpticsOTIfEncodingOption OBJECT-TYPE Encoding option selected | 1.3.6.1.4.1.2636.3.71.1.1.8.1.7 | JnxOpticsOTIfEncodingOptions | read-write | current |
| jnxOpticsOTIfModulation OBJECT-TYPE Modulation formats supported on the platform Unknown - (0), 16QAM - (1), 8QAM - (2), QPSK - (3) | 1.3.6.1.4.1.2636.3.71.1.1.8.1.8 | Integer32 (1..1024) | read-write | current |
| jnxOpticsOTIfAdminState OBJECT-TYPE The Admin state of this interface | 1.3.6.1.4.1.2636.3.71.1.1.8.1.9 | JnxOpticsOTIfAdminStates | read-write | current |
| jnxOpticsOTIfOperState OBJECT-TYPE The operational state of this interface | 1.3.6.1.4.1.2636.3.71.1.1.8.1.10 | JnxOpticsOTIfOperStates | read-only | current |
| jnxOpticsOTIfHighPolarization OBJECT-TYPE Enable/disable high-polarization mode. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.11 | TruthValue | read-write | current |
| jnxOpticsOTIfPreFecBERThresholdMantissa OBJECT-TYPE This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.12 | Integer32 | read-write | current |
| jnxOpticsOTIfPreFecBERThresholdExponent OBJECT-TYPE This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.13 | Integer32 | read-write | current |
| jnxOpticsOTIfPreFecBERThresholdTime OBJECT-TYPE Specify the interval for which the BER must stay above the signal degradation threshold or below the clear threshold for the alarm to be raised or cleared respectively. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.14 | Integer32 | read-write | current |
| jnxOpticsOTIfPreFecBERThresholdClearMantissa OBJECT-TYPE This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.15 | Integer32 | read-write | current |
| jnxOpticsOTIfPreFecBERThresholdClearExponent OBJECT-TYPE This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count. | 1.3.6.1.4.1.2636.3.71.1.1.8.1.16 | Integer32 | read-write | current |
| jnxOpticsPerformanceMonitoring OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.71.1.2 | |||
| jnxOpticsPMCurrentTable OBJECT-TYPE A table of current PM entries. | 1.3.6.1.4.1.2636.3.71.1.2.1 | not-accessible | current | |
| jnxOpticsPMCurrentEntry OBJECT-TYPE A conceptual row that contains information about the PM Current Table. | 1.3.6.1.4.1.2636.3.71.1.2.1.1 | not-accessible | current | |
| jnxPMCurChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.1 | Integer32 | read-only | current |
| jnxPMCurDiffGroupDelay OBJECT-TYPE Differential group delay | 1.3.6.1.4.1.2636.3.71.1.2.1.1.2 | Integer32 | read-only | current |
| jnxPMCurPolarizationState OBJECT-TYPE Polarization state | 1.3.6.1.4.1.2636.3.71.1.2.1.1.3 | Integer32 | read-only | current |
| jnxPMCurPolarDepLoss OBJECT-TYPE The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of polarization (SOP) over all SOPs | 1.3.6.1.4.1.2636.3.71.1.2.1.1.4 | Integer32 | read-only | current |
| jnxPMCurQ OBJECT-TYPE 'Q' factor estimated at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.5 | Integer32 | read-only | current |
| jnxPMCurSNR OBJECT-TYPE SNR - signal to noise ratio | 1.3.6.1.4.1.2636.3.71.1.2.1.1.6 | Integer32 | read-only | current |
| jnxPMCurTxOutputPower OBJECT-TYPE TxOutputPower - transmit output power | 1.3.6.1.4.1.2636.3.71.1.2.1.1.7 | Integer32 | read-only | current |
| jnxPMCurRxInputPower OBJECT-TYPE RxInputPower - receive output power | 1.3.6.1.4.1.2636.3.71.1.2.1.1.8 | Integer32 | read-only | current |
| jnxPMCurMinChromaticDispersion OBJECT-TYPE Min Residual Chromatic Dispersion measured at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.9 | Integer32 | read-only | current |
| jnxPMCurMaxChromaticDispersion OBJECT-TYPE Max Residual Chromatic Dispersion measured at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.10 | Integer32 | read-only | current |
| jnxPMCurAvgChromaticDispersion OBJECT-TYPE Average Residual Chromatic Dispersion measured at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.11 | Integer32 | read-only | current |
| jnxPMCurMinDiffGroupDelay OBJECT-TYPE Min Differential group delay | 1.3.6.1.4.1.2636.3.71.1.2.1.1.12 | Integer32 | read-only | current |
| jnxPMCurMaxDiffGroupDelay OBJECT-TYPE Max Differential group delay | 1.3.6.1.4.1.2636.3.71.1.2.1.1.13 | Integer32 | read-only | current |
| jnxPMCurAvgDiffGroupDelay OBJECT-TYPE Average Differential group delay | 1.3.6.1.4.1.2636.3.71.1.2.1.1.14 | Integer32 | read-only | current |
| jnxPMCurMinPolarState OBJECT-TYPE Min Polarization state | 1.3.6.1.4.1.2636.3.71.1.2.1.1.15 | Integer32 | read-only | current |
| jnxPMCurMaxPolarState OBJECT-TYPE Max Polarization state | 1.3.6.1.4.1.2636.3.71.1.2.1.1.16 | Integer32 | read-only | current |
| jnxPMCurAvgPolarState OBJECT-TYPE Avg Polarization state | 1.3.6.1.4.1.2636.3.71.1.2.1.1.17 | Integer32 | read-only | current |
| jnxPMCurMinPolarDepLoss OBJECT-TYPE Min - The polarisation dependent loss (PDL) | 1.3.6.1.4.1.2636.3.71.1.2.1.1.18 | Integer32 | read-only | current |
| jnxPMCurMaxPolarDepLoss OBJECT-TYPE Max - The polarisation dependent loss (PDL) | 1.3.6.1.4.1.2636.3.71.1.2.1.1.19 | Integer32 | read-only | current |
| jnxPMCurAvgPolarDepLoss OBJECT-TYPE Avg - The polarisation dependent loss (PDL) | 1.3.6.1.4.1.2636.3.71.1.2.1.1.20 | Integer32 | read-only | current |
| jnxPMCurMinQ OBJECT-TYPE Min 'Q' factor estimated at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.21 | Integer32 | read-only | current |
| jnxPMCurMaxQ OBJECT-TYPE Max 'Q' factor estimated at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.22 | Integer32 | read-only | current |
| jnxPMCurAvgQ OBJECT-TYPE Avg 'Q' factor estimated at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.23 | Integer32 | read-only | current |
| jnxPMCurMinSNR OBJECT-TYPE Min SNR - signal to noise ratio | 1.3.6.1.4.1.2636.3.71.1.2.1.1.24 | Integer32 | read-only | current |
| jnxPMCurMaxSNR OBJECT-TYPE Max SNR - signal to noise ratio | 1.3.6.1.4.1.2636.3.71.1.2.1.1.25 | Integer32 | read-only | current |
| jnxPMCurAvgSNR OBJECT-TYPE Avg SNR - signal to noise ratio | 1.3.6.1.4.1.2636.3.71.1.2.1.1.26 | Integer32 | read-only | current |
| jnxPMCurMinTxOutputPower OBJECT-TYPE Min TxOutputPower - transmit output power | 1.3.6.1.4.1.2636.3.71.1.2.1.1.27 | Integer32 | read-only | current |
| jnxPMCurMaxTxOutputPower OBJECT-TYPE Max TxOutputPower - transmit output power | 1.3.6.1.4.1.2636.3.71.1.2.1.1.28 | Integer32 | read-only | current |
| jnxPMCurAvgTxOutputPower OBJECT-TYPE Avg TxOutputPower - transmit output power | 1.3.6.1.4.1.2636.3.71.1.2.1.1.29 | Integer32 | read-only | current |
| jnxPMCurMinRxInputPower OBJECT-TYPE Min RxInputPower - receive output power | 1.3.6.1.4.1.2636.3.71.1.2.1.1.30 | Integer32 | read-only | current |
| jnxPMCurMaxRxInputPower OBJECT-TYPE Max RxInputPower - receive output power | 1.3.6.1.4.1.2636.3.71.1.2.1.1.31 | Integer32 | read-only | current |
| jnxPMCurAvgRxInputPower OBJECT-TYPE Avg RxInputPower - receive output power | 1.3.6.1.4.1.2636.3.71.1.2.1.1.32 | Integer32 | read-only | current |
| jnxPMCurSuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.1.1.33 | TruthValue | read-only | current |
| jnxPMCurSuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts | 1.3.6.1.4.1.2636.3.71.1.2.1.1.34 | Integer32 | read-only | current |
| jnxPMCurTxLaserBiasCurrent OBJECT-TYPE Trasmit LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.35 | Integer32 | read-only | current |
| jnxPMCurMinTxLaserBiasCurrent OBJECT-TYPE Minimum trasmit LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.36 | Integer32 | read-only | current |
| jnxPMCurMaxTxLaserBiasCurrent OBJECT-TYPE Maximum trasmit LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.37 | Integer32 | read-only | current |
| jnxPMCurAvgTxLaserBiasCurrent OBJECT-TYPE Average LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.38 | Integer32 | read-only | current |
| jnxPMCurTemperature OBJECT-TYPE Temperature measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.39 | Integer32 | read-only | current |
| jnxPMCurMinTemperature OBJECT-TYPE Minimum Temperature measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.40 | Integer32 | read-only | current |
| jnxPMCurMaxTemperature OBJECT-TYPE Maximum Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.41 | Integer32 | read-only | current |
| jnxPMCurAvgTemperature OBJECT-TYPE Average Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.42 | Integer32 | read-only | current |
| jnxPMCurCarFreqOffset OBJECT-TYPE Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.43 | Integer32 | read-only | current |
| jnxPMCurMinCarFreqOffset OBJECT-TYPE Minimum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.44 | Integer32 | read-only | current |
| jnxPMCurMaxCarFreqOffset OBJECT-TYPE Maximum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.45 | Integer32 | read-only | current |
| jnxPMCurAvgCarFreqOffset OBJECT-TYPE Average Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.46 | Integer32 | read-only | current |
| jnxPMCurRxLaserBiasCurrent OBJECT-TYPE Received LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.47 | Integer32 | read-only | current |
| jnxPMCurMinRxLaserBiasCurrent OBJECT-TYPE Received Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.48 | Integer32 | read-only | current |
| jnxPMCurMaxRxLaserBiasCurrent OBJECT-TYPE Received Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.49 | Integer32 | read-only | current |
| jnxPMCurAvgRxLaserBiasCurrent OBJECT-TYPE Received Average LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.50 | Integer32 | read-only | current |
| jnxPMCurTecCurrent OBJECT-TYPE Received TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.51 | Integer32 | read-only | current |
| jnxPMCurMinTecCurrent OBJECT-TYPE Received Minimum TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.52 | Integer32 | read-only | current |
| jnxPMCurMaxTecCurrent OBJECT-TYPE Received Maximum TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.53 | Integer32 | read-only | current |
| jnxPMCurAvgTecCurrent OBJECT-TYPE Received Average TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.54 | Integer32 | read-only | current |
| jnxPMCurResidualDispersion OBJECT-TYPE Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.55 | Integer32 | read-only | current |
| jnxPMCurMinResidualDispersion OBJECT-TYPE Minimum Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.56 | Integer32 | read-only | current |
| jnxPMCurMaxResidualDispersion OBJECT-TYPE Maximum Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.57 | Integer32 | read-only | current |
| jnxPMCurAvgResidualDispersion OBJECT-TYPE Average Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.58 | Integer32 | read-only | current |
| jnxPMCurLevelHistogram OBJECT-TYPE The rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.59 | Integer32 | read-only | current |
| jnxPMCurMinLevelHistogram OBJECT-TYPE The Minimum rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.60 | Integer32 | read-only | current |
| jnxPMCurMaxLevelHistogram OBJECT-TYPE The Maximum rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.61 | Integer32 | read-only | current |
| jnxPMCurAvgLevelHistogram OBJECT-TYPE The Average rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.62 | Integer32 | read-only | current |
| jnxPMCurLaserFrequencyError OBJECT-TYPE Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.63 | Integer32 | read-only | current |
| jnxPMCurMinLaserFrequencyError OBJECT-TYPE Minimum Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.64 | Integer32 | read-only | current |
| jnxPMCurMaxLaserFrequencyError OBJECT-TYPE Maximum Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.65 | Integer32 | read-only | current |
| jnxPMCurAvgLaserFrequencyError OBJECT-TYPE Average Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.1.1.66 | Integer32 | read-only | current |
| jnxPMCurFECCorrectedErrorsMantissa OBJECT-TYPE Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.67 | Integer32 | read-only | current |
| jnxPMCurFECCorrectedErrorsExponent OBJECT-TYPE Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.68 | Integer32 | read-only | current |
| jnxPMCurMinFECCorrectedErrorsMantissa OBJECT-TYPE Minimum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.69 | Integer32 | read-only | current |
| jnxPMCurMinFECCorrectedErrorsExponent OBJECT-TYPE Minimum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.70 | Integer32 | read-only | current |
| jnxPMCurMaxFECCorrectedErrorsMantissa OBJECT-TYPE Maximum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.71 | Integer32 | read-only | current |
| jnxPMCurMaxFECCorrectedErrorsExponent OBJECT-TYPE Maximum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.72 | Integer32 | read-only | current |
| jnxPMCurAvgFECCorrectedErrorsMantissa OBJECT-TYPE Average Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.73 | Integer32 | read-only | current |
| jnxPMCurAvgFECCorrectedErrorsExponent OBJECT-TYPE Average Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.74 | Integer32 | read-only | current |
| jnxPMCurFECUCorrectedWordsMantissa OBJECT-TYPE Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.75 | Integer32 | read-only | current |
| jnxPMCurFECUCorrectedWordsExponent OBJECT-TYPE Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.76 | Integer32 | read-only | current |
| jnxPMCurMinFECUCorrectedWordsMantissa OBJECT-TYPE Minimum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.77 | Integer32 | read-only | current |
| jnxPMCurMinFECUCorrectedWordsExponent OBJECT-TYPE Minimum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.78 | Integer32 | read-only | current |
| jnxPMCurMaxFECUCorrectedWordsMantissa OBJECT-TYPE Maximum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.79 | Integer32 | read-only | current |
| jnxPMCurMaxFECUCorrectedWordsExponent OBJECT-TYPE Maximum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.80 | Integer32 | read-only | current |
| jnxPMCurAvgFECUCorrectedWordsMantissa OBJECT-TYPE Average Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.81 | Integer32 | read-only | current |
| jnxPMCurAvgFECUCorrectedWordsExponent OBJECT-TYPE Average Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.1.1.82 | Integer32 | read-only | current |
| jnxOpticsPMIntervalTable OBJECT-TYPE A table of current PM entries. | 1.3.6.1.4.1.2636.3.71.1.2.2 | not-accessible | current | |
| jnxOpticsPMIntervalEntry OBJECT-TYPE A conceptual row that contains information about the PM Interval Table. | 1.3.6.1.4.1.2636.3.71.1.2.2.1 | not-accessible | current | |
| jnxOpticsPMIntervalNumber OBJECT-TYPE This is the 15 mintute interavl number. | 1.3.6.1.4.1.2636.3.71.1.2.2.1.1 | Unsigned32 (1..96) | not-accessible | current |
| jnxPMIntMinChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.2 | Integer32 | read-only | current |
| jnxPMIntMaxChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.3 | Integer32 | read-only | current |
| jnxPMIntAvgChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.4 | Integer32 | read-only | current |
| jnxPMIntMinDiffGroupDelay OBJECT-TYPE Differential group delay measured at Rx Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.5 | Integer32 | read-only | current |
| jnxPMIntMaxDiffGroupDelay OBJECT-TYPE Differential group delay measured at Rx Transceiver port -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.6 | Integer32 | read-only | current |
| jnxPMIntAvgDiffGroupDelay OBJECT-TYPE Differential group delay measured at Rx Transceiver port -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.7 | Integer32 | read-only | current |
| jnxPMIntMinPolarState OBJECT-TYPE Polarization state -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.8 | Integer32 | read-only | current |
| jnxPMIntMaxPolarState OBJECT-TYPE Polarization state -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.9 | Integer32 | read-only | current |
| jnxPMIntAvgPolarState OBJECT-TYPE Polarization state -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.10 | Integer32 | read-only | current |
| jnxPMIntMinPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.11 | Integer32 | read-only | current |
| jnxPMIntMaxPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.12 | Integer32 | read-only | current |
| jnxPMIntAvgPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.13 | Integer32 | read-only | current |
| jnxPMIntMinQ OBJECT-TYPE Q -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.14 | Integer32 | read-only | current |
| jnxPMIntMaxQ OBJECT-TYPE Q -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.15 | Integer32 | read-only | current |
| jnxPMIntAvgQ OBJECT-TYPE Q -- Avg in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.16 | Integer32 | read-only | current |
| jnxPMIntMinSNR OBJECT-TYPE SNR -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.17 | Integer32 | read-only | current |
| jnxPMIntMaxSNR OBJECT-TYPE SNR -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.18 | Integer32 | read-only | current |
| jnxPMIntAvgSNR OBJECT-TYPE SNR -- avg in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.19 | Integer32 | read-only | current |
| jnxPMIntMinTxOutputPower OBJECT-TYPE TxOutputPower -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.20 | Integer32 | read-only | current |
| jnxPMIntMaxTxOutputPower OBJECT-TYPE TxOutputPower -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.21 | Integer32 | read-only | current |
| jnxPMIntAvgTxOutputPower OBJECT-TYPE TxOutputPower -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.22 | Integer32 | read-only | current |
| jnxPMIntMinRxInputPower OBJECT-TYPE RxInputPower -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.23 | Integer32 | read-only | current |
| jnxPMIntMaxRxInputPower OBJECT-TYPE RxInputPower -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.24 | Integer32 | read-only | current |
| jnxPMIntAvgRxInputPower OBJECT-TYPE RxInputPower -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.25 | Integer32 | read-only | current |
| jnxPMIntTimeStamp OBJECT-TYPE Time stamp PM interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.26 | DateAndTime | read-only | current |
| jnxPMIntSuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.2.1.27 | TruthValue | read-only | current |
| jnxPMIntSuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts | 1.3.6.1.4.1.2636.3.71.1.2.2.1.28 | Integer32 | read-only | current |
| jnxPMIntMinTxLaserBiasCurrent OBJECT-TYPE Transmit Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.29 | Integer32 | read-only | current |
| jnxPMIntMaxTxLaserBiasCurrent OBJECT-TYPE Transmit Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.30 | Integer32 | read-only | current |
| jnxPMIntAvgTxLaserBiasCurrent OBJECT-TYPE Transmit Average LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.31 | Integer32 | read-only | current |
| jnxPMIntMinTemperature OBJECT-TYPE Minimum Temperature measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.32 | Integer32 | read-only | current |
| jnxPMIntMaxTemperature OBJECT-TYPE Maximum Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.33 | Integer32 | read-only | current |
| jnxPMIntAvgTemperature OBJECT-TYPE Average Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.34 | Integer32 | read-only | current |
| jnxPMIntMinCarFreqOffset OBJECT-TYPE Minimum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.35 | Integer32 | read-only | current |
| jnxPMIntMaxCarFreqOffset OBJECT-TYPE Maximum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.36 | Integer32 | read-only | current |
| jnxPMIntAvgCarFreqOffset OBJECT-TYPE Average Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.37 | Integer32 | read-only | current |
| jnxPMIntMinRxLaserBiasCurrent OBJECT-TYPE Receive Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.38 | Integer32 | read-only | current |
| jnxPMIntMaxRxLaserBiasCurrent OBJECT-TYPE Receive Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.39 | Integer32 | read-only | current |
| jnxPMIntAvgRxLaserBiasCurrent OBJECT-TYPE Receive Average LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.2.1.40 | Integer32 | read-only | current |
| jnxPMIntMinTecCurrent OBJECT-TYPE Received Minimum TecCurrent measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.41 | Integer32 | read-only | current |
| jnxPMIntMaxTecCurrent OBJECT-TYPE Received Maximum TecCurrent measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.42 | Integer32 | read-only | current |
| jnxPMIntAvgTecCurrent OBJECT-TYPE Received Average TecCurrent measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.43 | Integer32 | read-only | current |
| jnxPMIntMinResidualDispersion OBJECT-TYPE Minimum Residual Dispersion measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.44 | Integer32 | read-only | current |
| jnxPMIntMaxResidualDispersion OBJECT-TYPE Maximum Residual Dispersion measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.45 | Integer32 | read-only | current |
| jnxPMIntAvgResidualDispersion OBJECT-TYPE Average Residual Dispersion measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.46 | Integer32 | read-only | current |
| jnxPMIntMinLevelHistogram OBJECT-TYPE The Minimum rate of measured signal at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.47 | Integer32 | read-only | current |
| jnxPMIntMaxLevelHistogram OBJECT-TYPE The Maximum rate of measured signal at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.48 | Integer32 | read-only | current |
| jnxPMIntAvgLevelHistogram OBJECT-TYPE The Average rate of measured signal at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.49 | Integer32 | read-only | current |
| jnxPMIntMinLaserFrequencyError OBJECT-TYPE Minimum Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.50 | Integer32 | read-only | current |
| jnxPMIntMaxLaserFrequencyError OBJECT-TYPE Maximum Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.51 | Integer32 | read-only | current |
| jnxPMIntAvgLaserFrequencyError OBJECT-TYPE Average Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.52 | Integer32 | read-only | current |
| jnxPMIntMinFECCorrectedErrorsMantissa OBJECT-TYPE Minimum Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.53 | Integer32 | read-only | current |
| jnxPMIntMinFECCorrectedErrorsExponent OBJECT-TYPE Minimum Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.54 | Integer32 | read-only | current |
| jnxPMIntMaxFECCorrectedErrorsMantissa OBJECT-TYPE Maximum Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.55 | Integer32 | read-only | current |
| jnxPMIntMaxFECCorrectedErrorsExponent OBJECT-TYPE Maximum Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.56 | Integer32 | read-only | current |
| jnxPMIntAvgFECCorrectedErrorsMantissa OBJECT-TYPE Average Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.57 | Integer32 | read-only | current |
| jnxPMIntAvgFECCorrectedErrorsExponent OBJECT-TYPE Average Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.58 | Integer32 | read-only | current |
| jnxPMIntMinFECUCorrectedWordsMantissa OBJECT-TYPE Minimum Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.59 | Integer32 | read-only | current |
| jnxPMIntMinFECUCorrectedWordsExponent OBJECT-TYPE Minimum Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.60 | Integer32 | read-only | current |
| jnxPMIntMaxFECUCorrectedWordsMantissa OBJECT-TYPE Maximum Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.61 | Integer32 | read-only | current |
| jnxPMIntMaxFECUCorrectedWordsExponent OBJECT-TYPE Maximum Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.62 | Integer32 | read-only | current |
| jnxPMIntAvgFECUCorrectedWordsMantissa OBJECT-TYPE Average Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.63 | Integer32 | read-only | current |
| jnxPMIntAvgFECUCorrectedWordsExponent OBJECT-TYPE Average Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.2.1.64 | Integer32 | read-only | current |
| jnxOpticsPMDayTable OBJECT-TYPE A table of current PM Day entries. | 1.3.6.1.4.1.2636.3.71.1.2.3 | not-accessible | current | |
| jnxOpticsPMDayEntry OBJECT-TYPE A conceptual row that contains information about the PM Day Table | 1.3.6.1.4.1.2636.3.71.1.2.3.1 | not-accessible | current | |
| jnxOpticsPMDayIndex OBJECT-TYPE This is 1 - cur day/ 2 - prev day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.1 | Unsigned32 (1..2) | not-accessible | current |
| jnxPMDayMinChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - min in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.2 | Integer32 | read-only | current |
| jnxPMDayMaxChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - max in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.3 | Integer32 | read-only | current |
| jnxPMDayAvgChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - average in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.4 | Integer32 | read-only | current |
| jnxPMDayMinDiffGroupDelay OBJECT-TYPE Differential Group Delay measured at Rx Transceiver port -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.5 | Integer32 | read-only | current |
| jnxPMDayMaxDiffGroupDelay OBJECT-TYPE Differential Group Delay measured at Rx Transceiver port -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.6 | Integer32 | read-only | current |
| jnxPMDayAvgDiffGroupDelay OBJECT-TYPE Differential Group Delay measured at Rx Transceiver port -- average in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.7 | Integer32 | read-only | current |
| jnxPMDayMinPolarState OBJECT-TYPE Polarization state -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.8 | Integer32 | read-only | current |
| jnxPMDayMaxPolarState OBJECT-TYPE Polarization state -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.9 | Integer32 | read-only | current |
| jnxPMDayAvgPolarState OBJECT-TYPE Polarization state -- average in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.10 | Integer32 | read-only | current |
| jnxPMDayMinPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.11 | Integer32 | read-only | current |
| jnxPMDayMaxPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.12 | Integer32 | read-only | current |
| jnxPMDayAvgPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- average in the day interval | 1.3.6.1.4.1.2636.3.71.1.2.3.1.13 | Integer32 | read-only | current |
| jnxPMDayMinQ OBJECT-TYPE Q -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.14 | Integer32 | read-only | current |
| jnxPMDayMaxQ OBJECT-TYPE Q -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.15 | Integer32 | read-only | current |
| jnxPMDayAvgQ OBJECT-TYPE Q -- Avg in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.16 | Integer32 | read-only | current |
| jnxPMDayMinSNR OBJECT-TYPE SNR -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.17 | Integer32 | read-only | current |
| jnxPMDayMaxSNR OBJECT-TYPE SNR -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.18 | Integer32 | read-only | current |
| jnxPMDayAvgSNR OBJECT-TYPE SNR -- avg in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.19 | Integer32 | read-only | current |
| jnxPMDayMinTxOutputPower OBJECT-TYPE TxOutputPower -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.3.1.20 | Integer32 | read-only | current |
| jnxPMDayMaxTxOutputPower OBJECT-TYPE TxOutputPower -- max in the day. | 1.3.6.1.4.1.2636.3.71.1.2.3.1.21 | Integer32 | read-only | current |
| jnxPMDayAvgTxOutputPower OBJECT-TYPE TxOutputPower -- average in the day. | 1.3.6.1.4.1.2636.3.71.1.2.3.1.22 | Integer32 | read-only | current |
| jnxPMDayMinRxInputPower OBJECT-TYPE RxInputPower -- min in the day. | 1.3.6.1.4.1.2636.3.71.1.2.3.1.23 | Integer32 | read-only | current |
| jnxPMDayMaxRxInputPower OBJECT-TYPE RxInputPower -- max in the day. | 1.3.6.1.4.1.2636.3.71.1.2.3.1.24 | Integer32 | read-only | current |
| jnxPMDayAvgRxInputPower OBJECT-TYPE RxInputPower -- average in the day. | 1.3.6.1.4.1.2636.3.71.1.2.3.1.25 | Integer32 | read-only | current |
| jnxPMDayTimeStamp OBJECT-TYPE Time for the Day. | 1.3.6.1.4.1.2636.3.71.1.2.3.1.26 | DateAndTime | read-only | current |
| jnxPMDaySuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.3.1.27 | TruthValue | read-only | current |
| jnxPMDaySuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - partial data 7 - one or more intervals are invaild | 1.3.6.1.4.1.2636.3.71.1.2.3.1.28 | Integer32 | read-only | current |
| jnxPMDayMinTxLaserBiasCurrent OBJECT-TYPE Transmit LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.29 | Integer32 | read-only | current |
| jnxPMDayMaxTxLaserBiasCurrent OBJECT-TYPE Transmit Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.30 | Integer32 | read-only | current |
| jnxPMDayAvgTxLaserBiasCurrent OBJECT-TYPE Transmit Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.31 | Integer32 | read-only | current |
| jnxPMDayMinTemperature OBJECT-TYPE Minimum Temperature measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.32 | Integer32 | read-only | current |
| jnxPMDayMaxTemperature OBJECT-TYPE Maximum Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.33 | Integer32 | read-only | current |
| jnxPMDayAvgTemperature OBJECT-TYPE Average Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.34 | Integer32 | read-only | current |
| jnxPMDayMinCarFreqOffset OBJECT-TYPE Minimum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.35 | Integer32 | read-only | current |
| jnxPMDayMaxCarFreqOffset OBJECT-TYPE Maximum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.36 | Integer32 | read-only | current |
| jnxPMDayAvgCarFreqOffset OBJECT-TYPE Average Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.37 | Integer32 | read-only | current |
| jnxPMDayMinRxLaserBiasCurrent OBJECT-TYPE Receive LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.38 | Integer32 | read-only | current |
| jnxPMDayMaxRxLaserBiasCurrent OBJECT-TYPE Receive Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.39 | Integer32 | read-only | current |
| jnxPMDayAvgRxLaserBiasCurrent OBJECT-TYPE Receive Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.40 | Integer32 | read-only | current |
| jnxPMDayMinTecCurrent OBJECT-TYPE Received Minimum TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.41 | Integer32 | read-only | current |
| jnxPMDayMaxTecCurrent OBJECT-TYPE Received Maximum TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.42 | Integer32 | read-only | current |
| jnxPMDayAvgTecCurrent OBJECT-TYPE Received Average TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.43 | Integer32 | read-only | current |
| jnxPMDayMinResidualDispersion OBJECT-TYPE Minimum Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.44 | Integer32 | read-only | current |
| jnxPMDayMaxResidualDispersion OBJECT-TYPE Maximum Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.45 | Integer32 | read-only | current |
| jnxPMDayAvgResidualDispersion OBJECT-TYPE Average Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.46 | Integer32 | read-only | current |
| jnxPMDayMinLevelHistogram OBJECT-TYPE The Minimum rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.47 | Integer32 | read-only | current |
| jnxPMDayMaxLevelHistogram OBJECT-TYPE The Maximum rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.48 | Integer32 | read-only | current |
| jnxPMDayAvgLevelHistogram OBJECT-TYPE The Average rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.49 | Integer32 | read-only | current |
| jnxPMDayMinLaserFrequencyError OBJECT-TYPE Minimum Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.50 | Integer32 | read-only | current |
| jnxPMDayMaxLaserFrequencyError OBJECT-TYPE Maximum Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.51 | Integer32 | read-only | current |
| jnxPMDayAvgLaserFrequencyError OBJECT-TYPE Average Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.3.1.52 | Integer32 | read-only | current |
| jnxPMDayMinFECCorrectedErrorsMantissa OBJECT-TYPE Minimum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.53 | Integer32 | read-only | current |
| jnxPMDayMinFECCorrectedErrorsExponent OBJECT-TYPE Minimum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.54 | Integer32 | read-only | current |
| jnxPMDayMaxFECCorrectedErrorsMantissa OBJECT-TYPE Maximum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.55 | Integer32 | read-only | current |
| jnxPMDayMaxFECCorrectedErrorsExponent OBJECT-TYPE Maximum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.56 | Integer32 | read-only | current |
| jnxPMDayAvgFECCorrectedErrorsMantissa OBJECT-TYPE Average Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.57 | Integer32 | read-only | current |
| jnxPMDayAvgFECCorrectedErrorsExponent OBJECT-TYPE Average Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.58 | Integer32 | read-only | current |
| jnxPMDayMinFECUCorrectedWordsMantissa OBJECT-TYPE Minimum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.59 | Integer32 | read-only | current |
| jnxPMDayMinFECUCorrectedWordsExponent OBJECT-TYPE Minimum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.60 | Integer32 | read-only | current |
| jnxPMDayMaxFECUCorrectedWordsMantissa OBJECT-TYPE Maximum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.61 | Integer32 | read-only | current |
| jnxPMDayMaxFECUCorrectedWordsExponent OBJECT-TYPE Maximum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.62 | Integer32 | read-only | current |
| jnxPMDayAvgFECUCorrectedWordsMantissa OBJECT-TYPE Average Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.63 | Integer32 | read-only | current |
| jnxPMDayAvgFECUCorrectedWordsExponent OBJECT-TYPE Average Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.3.1.64 | Integer32 | read-only | current |
| jnxOpticsOTIfPMFECCurrentTable OBJECT-TYPE A Performance monitoring FEC Current Table. | 1.3.6.1.4.1.2636.3.71.1.2.4 | not-accessible | current | |
| jnxOpticsOTIfPMFECCurrentEntry OBJECT-TYPE A conceptual entry in the Near end or Far End performance monitoring FEC current table. | 1.3.6.1.4.1.2636.3.71.1.2.4.1 | not-accessible | current | |
| jnxOpticsOTIfPMFECCurrentSuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.4.1.1 | TruthValue | read-only | current |
| jnxOpticsOTIfPMCurrentFECCorrectedErr OBJECT-TYPE The number of bits corrected by the FEC are counted in the interval. | 1.3.6.1.4.1.2636.3.71.1.2.4.1.2 | Counter64 | read-only | current |
| jnxOpticsOTIfPMCurrentFECUncorrectedWords OBJECT-TYPE The number of un-corrected words by the FEC are counted over the interval. | 1.3.6.1.4.1.2636.3.71.1.2.4.1.3 | Counter64 | read-only | current |
| jnxOpticsOTIfPMCurrentFECBERMantissa OBJECT-TYPE The number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. | 1.3.6.1.4.1.2636.3.71.1.2.4.1.4 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentFECBERExponent OBJECT-TYPE The number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). | 1.3.6.1.4.1.2636.3.71.1.2.4.1.5 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentFECMinBERMantissa OBJECT-TYPE The minimum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. | 1.3.6.1.4.1.2636.3.71.1.2.4.1.6 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentFECMinBERExponent OBJECT-TYPE The minimum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). | 1.3.6.1.4.1.2636.3.71.1.2.4.1.7 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentFECMaxBERMantissa OBJECT-TYPE The maximum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. | 1.3.6.1.4.1.2636.3.71.1.2.4.1.8 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentFECMaxBERExponent OBJECT-TYPE The maximum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). | 1.3.6.1.4.1.2636.3.71.1.2.4.1.9 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentFECAvgBERMantissa OBJECT-TYPE The average number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. | 1.3.6.1.4.1.2636.3.71.1.2.4.1.10 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentFECAvgBERExponent OBJECT-TYPE The average number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). | 1.3.6.1.4.1.2636.3.71.1.2.4.1.11 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentFECElapsedTime OBJECT-TYPE Time elapsed for this 15 minute interval. | 1.3.6.1.4.1.2636.3.71.1.2.4.1.12 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMFECCurSuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts | 1.3.6.1.4.1.2636.3.71.1.2.4.1.13 | Integer32 | read-only | current |
| jnxOpticsOTIfPMFECIntervalTable OBJECT-TYPE A Performance monitoring FEC Interval Table. | 1.3.6.1.4.1.2636.3.71.1.2.5 | not-accessible | current | |
| jnxOpticsOTIfPMFECIntervalEntry OBJECT-TYPE A conceptual entry in the Near end or Far End performance monitoring FEC interval table. | 1.3.6.1.4.1.2636.3.71.1.2.5.1 | not-accessible | current | |
| jnxOpticsOTIfPMFECIntervalNumber OBJECT-TYPE A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.1 | Unsigned32 | not-accessible | current |
| jnxOpticsOTIfPMFECIntervalSuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.2 | TruthValue | read-only | current |
| jnxOpticsOTIfPMIntervalFECCorrectedErr OBJECT-TYPE The number of bits corrected by the FEC are counted in the interval. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.3 | Counter64 | read-only | current |
| jnxOpticsOTIfPMIntervalFECUncorrectedWords OBJECT-TYPE The number of words un-corrected words by the FEC are counted over the interval. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.4 | Counter64 | read-only | current |
| jnxOpticsOTIfPMIntervalMinFECBERMantissa OBJECT-TYPE The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum Pre FEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.5 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMIntervalMinFECBERExponent OBJECT-TYPE The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum Pre FEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.6 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMIntervalMaxFECBERMantissa OBJECT-TYPE The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.7 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMIntervalMaxFECBERExponent OBJECT-TYPE The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.8 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMIntervalAvgFECBERMantissa OBJECT-TYPE The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.9 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMIntervalAvgFECBERExponent OBJECT-TYPE The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average Pre FEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.10 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMFECIntervalTimeStamp OBJECT-TYPE Time stamp of this interval. | 1.3.6.1.4.1.2636.3.71.1.2.5.1.11 | DateAndTime | read-only | current |
| jnxOpticsOTIfPMFECIntSuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts | 1.3.6.1.4.1.2636.3.71.1.2.5.1.12 | Integer32 | read-only | current |
| jnxOpticsOTIfPMFECCurrentDayTable OBJECT-TYPE A Performance monitoring FEC current day table. | 1.3.6.1.4.1.2636.3.71.1.2.6 | not-accessible | current | |
| jnxOpticsOTIfPMFECCurrentDayEntry OBJECT-TYPE A conceptual entry in the Near end or Far End performance monitoring FEC current day table. | 1.3.6.1.4.1.2636.3.71.1.2.6.1 | not-accessible | current | |
| jnxOpticsOTIfPMFECCurrentDaySuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.1 | TruthValue | read-only | current |
| jnxOpticsOTIfPMCurrentDayFECCorrectedErr OBJECT-TYPE The number of bits corrected by the FEC are counted in the interval. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.2 | Counter64 | read-only | current |
| jnxOpticsOTIfPMCurrentDayFECUncorrectedWords OBJECT-TYPE The number of words un-corrected by the FEC are counted over the Day. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.3 | Counter64 | read-only | current |
| jnxOpticsOTIfPMCurrentDayMinFECBERMantissa OBJECT-TYPE The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum PreFEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.4 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentDayMinFECBERExponent OBJECT-TYPE The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum PreFEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.5 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentDayMaxFECBERMantissa OBJECT-TYPE The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum PreFEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.6 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentDayMaxFECBERExponent OBJECT-TYPE The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum PreFEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.7 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentDayAvgFECBERMantissa OBJECT-TYPE The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average PreFEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.8 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMCurrentDayAvgFECBERExponent OBJECT-TYPE The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average PreFEC BER in the current 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.9 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMFECCurrentDayElapsedTime OBJECT-TYPE Time elapsed for current day. | 1.3.6.1.4.1.2636.3.71.1.2.6.1.10 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMFECCurDaySuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - one or more intervals are invaild | 1.3.6.1.4.1.2636.3.71.1.2.6.1.11 | Integer32 | read-only | current |
| jnxOpticsOTIfPMFECPrevDayTable OBJECT-TYPE A Performance monitoring FEC previous day table. | 1.3.6.1.4.1.2636.3.71.1.2.7 | not-accessible | current | |
| jnxOpticsOTIfPMFECPrevDayEntry OBJECT-TYPE A conceptual entry in the Near end or Far End performance monitoring FEC previous day table. | 1.3.6.1.4.1.2636.3.71.1.2.7.1 | not-accessible | current | |
| jnxOpticsOTIfPMFECPrevDaySuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.7.1.1 | TruthValue | read-only | current |
| jnxOpticsOTIfPMPrevDayFECCorrectedErr OBJECT-TYPE The number of bits corrected by the FEC are counted in the previous day. | 1.3.6.1.4.1.2636.3.71.1.2.7.1.2 | Counter64 | read-only | current |
| jnxOpticsOTIfPMPrevDayFECUncorrectedWords OBJECT-TYPE The number of un-corrected words by the FEC are counted over the previous Day. | 1.3.6.1.4.1.2636.3.71.1.2.7.1.3 | Counter64 | read-only | current |
| jnxOpticsOTIfPMPrevDayMinFECBERMantissa OBJECT-TYPE The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.7.1.4 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMPrevDayMinFECBERExponent OBJECT-TYPE The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the previous 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.7.1.5 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMPrevDayMaxFECBERMantissa OBJECT-TYPE The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period (mantissa). | 1.3.6.1.4.1.2636.3.71.1.2.7.1.6 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMPrevDayMaxFECBERExponent OBJECT-TYPE The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the maximum Pre FEC BER in the previous 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.7.1.7 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMPrevDayAvgFECBERMantissa OBJECT-TYPE The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER during the previous 24hour period (mantissa). | 1.3.6.1.4.1.2636.3.71.1.2.7.1.8 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMPrevDayAvgFECBERExponent OBJECT-TYPE The average bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the average Pre FEC BER during the previous 24hour period. | 1.3.6.1.4.1.2636.3.71.1.2.7.1.9 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPMFECPrevDayTimeStamp OBJECT-TYPE Time stamp for the Prev day. | 1.3.6.1.4.1.2636.3.71.1.2.7.1.10 | DateAndTime | read-only | current |
| jnxOpticsOTIfPMFECPrevDaySuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - one or more intervals are invaild | 1.3.6.1.4.1.2636.3.71.1.2.7.1.11 | Integer32 | read-only | current |
| jnxOpticsOTIfPMFECConfigTable OBJECT-TYPE A table of current PM entries. | 1.3.6.1.4.1.2636.3.71.1.2.8 | not-accessible | current | |
| jnxOpticsOTIfPMFECConfigEntry OBJECT-TYPE A conceptual row that contains information about the OT interface PM Current Table. | 1.3.6.1.4.1.2636.3.71.1.2.8.1 | not-accessible | current | |
| jnxOpticsOTIfPMFECValidIntervals OBJECT-TYPE The number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. | 1.3.6.1.4.1.2636.3.71.1.2.8.1.1 | Unsigned32 | read-only | current |
| jnxOpticsOTIfPM15MinPreFECBERMantissaThreshold OBJECT-TYPE BER (mantissa) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxOpticsOTIf15MinThreshPreFECBERTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification. | 1.3.6.1.4.1.2636.3.71.1.2.8.1.2 | Unsigned32 | read-write | current |
| jnxOpticsOTIfPM15MinPreFECBERExponentThreshold OBJECT-TYPE The Pre FEC BER (exponent) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification. | 1.3.6.1.4.1.2636.3.71.1.2.8.1.3 | Unsigned32 | read-write | current |
| jnxOpticsOTIfPM24HourPreFECBERMantissaThreshold OBJECT-TYPE BER (mantissa) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 hour period per interface. A value of `0' will disable the notification. | 1.3.6.1.4.1.2636.3.71.1.2.8.1.4 | Unsigned32 | read-write | current |
| jnxOpticsOTIfPM24HourPreFECBERExponentThreshold OBJECT-TYPE The Pre FEC BER (exponent) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 hour period per interface. A value of `0' will disable the notification. | 1.3.6.1.4.1.2636.3.71.1.2.8.1.5 | Unsigned32 | read-write | current |
| jnxOpticsOTIfPMFECBEREnableTCA OBJECT-TYPE Enable TCA's - 15minute and 24hr for FEC BER | 1.3.6.1.4.1.2636.3.71.1.2.8.1.6 | TruthValue | read-write | current |
| jnxIfOpticsPMCurrentTable OBJECT-TYPE A table of current PM entries. | 1.3.6.1.4.1.2636.3.71.1.2.9 | not-accessible | current | |
| jnxIfOpticsPMCurrentEntry OBJECT-TYPE A conceptual row that contains information about the PM Current Table. | 1.3.6.1.4.1.2636.3.71.1.2.9.1 | not-accessible | current | |
| jnxIfOpticsPMCurrentLaneIndex OBJECT-TYPE This is the optics lane number. | 1.3.6.1.4.1.2636.3.71.1.2.9.1.1 | Unsigned32 (1..96) | not-accessible | current |
| jnxIfOpticsPMCurChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.2 | Integer32 | read-only | current |
| jnxIfOpticsPMCurDiffGroupDelay OBJECT-TYPE Differential group delay | 1.3.6.1.4.1.2636.3.71.1.2.9.1.3 | Integer32 | read-only | current |
| jnxIfOpticsPMCurPolarizationState OBJECT-TYPE Polarization state | 1.3.6.1.4.1.2636.3.71.1.2.9.1.4 | Integer32 | read-only | current |
| jnxIfOpticsPMCurPolarDepLoss OBJECT-TYPE The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of polarization (SOP) over all SOPs | 1.3.6.1.4.1.2636.3.71.1.2.9.1.5 | Integer32 | read-only | current |
| jnxIfOpticsPMCurQ OBJECT-TYPE 'Q' factor estimated at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.6 | Integer32 | read-only | current |
| jnxIfOpticsPMCurSNR OBJECT-TYPE SNR - signal to noise ratio | 1.3.6.1.4.1.2636.3.71.1.2.9.1.7 | Integer32 | read-only | current |
| jnxIfOpticsPMCurTxOutputPower OBJECT-TYPE TxOutputPower - transmit output power | 1.3.6.1.4.1.2636.3.71.1.2.9.1.8 | Integer32 | read-only | current |
| jnxIfOpticsPMCurRxInputPower OBJECT-TYPE RxInputPower - receive output power | 1.3.6.1.4.1.2636.3.71.1.2.9.1.9 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinChromaticDispersion OBJECT-TYPE Min Residual Chromatic Dispersion measured at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.10 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxChromaticDispersion OBJECT-TYPE Max Residual Chromatic Dispersion measured at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.11 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgChromaticDispersion OBJECT-TYPE Average Residual Chromatic Dispersion measured at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.12 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinDiffGroupDelay OBJECT-TYPE Min Differential group delay | 1.3.6.1.4.1.2636.3.71.1.2.9.1.13 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxDiffGroupDelay OBJECT-TYPE Max Differential group delay | 1.3.6.1.4.1.2636.3.71.1.2.9.1.14 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgDiffGroupDelay OBJECT-TYPE Average Differential group delay | 1.3.6.1.4.1.2636.3.71.1.2.9.1.15 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinPolarState OBJECT-TYPE Min Polarization state | 1.3.6.1.4.1.2636.3.71.1.2.9.1.16 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxPolarState OBJECT-TYPE Max Polarization state | 1.3.6.1.4.1.2636.3.71.1.2.9.1.17 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgPolarState OBJECT-TYPE Avg Polarization state | 1.3.6.1.4.1.2636.3.71.1.2.9.1.18 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinPolarDepLoss OBJECT-TYPE Min - The polarisation dependent loss (PDL) | 1.3.6.1.4.1.2636.3.71.1.2.9.1.19 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxPolarDepLoss OBJECT-TYPE Max - The polarisation dependent loss (PDL) | 1.3.6.1.4.1.2636.3.71.1.2.9.1.20 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgPolarDepLoss OBJECT-TYPE Avg - The polarisation dependent loss (PDL) | 1.3.6.1.4.1.2636.3.71.1.2.9.1.21 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinQ OBJECT-TYPE Min 'Q' factor estimated at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.22 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxQ OBJECT-TYPE Max 'Q' factor estimated at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.23 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgQ OBJECT-TYPE Avg 'Q' factor estimated at Rx Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.24 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinSNR OBJECT-TYPE Min SNR - signal to noise ratio | 1.3.6.1.4.1.2636.3.71.1.2.9.1.25 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxSNR OBJECT-TYPE Max SNR - signal to noise ratio | 1.3.6.1.4.1.2636.3.71.1.2.9.1.26 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgSNR OBJECT-TYPE Avg SNR - signal to noise ratio | 1.3.6.1.4.1.2636.3.71.1.2.9.1.27 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinTxOutputPower OBJECT-TYPE Min TxOutputPower - transmit output power | 1.3.6.1.4.1.2636.3.71.1.2.9.1.28 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxTxOutputPower OBJECT-TYPE Max TxOutputPower - transmit output power | 1.3.6.1.4.1.2636.3.71.1.2.9.1.29 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgTxOutputPower OBJECT-TYPE Avg TxOutputPower - transmit output power | 1.3.6.1.4.1.2636.3.71.1.2.9.1.30 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinRxInputPower OBJECT-TYPE Min RxInputPower - receive output power | 1.3.6.1.4.1.2636.3.71.1.2.9.1.31 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxRxInputPower OBJECT-TYPE Max RxInputPower - receive output power | 1.3.6.1.4.1.2636.3.71.1.2.9.1.32 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgRxInputPower OBJECT-TYPE Avg RxInputPower - receive output power | 1.3.6.1.4.1.2636.3.71.1.2.9.1.33 | Integer32 | read-only | current |
| jnxIfOpticsPMCurSuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.9.1.34 | TruthValue | read-only | current |
| jnxIfOpticsPMCurSuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts | 1.3.6.1.4.1.2636.3.71.1.2.9.1.35 | Integer32 | read-only | current |
| jnxIfOpticsPMCurTxLaserBiasCurrent OBJECT-TYPE Trasmit LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.36 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinTxLaserBiasCurrent OBJECT-TYPE Minimum trasmit LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.37 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxTxLaserBiasCurrent OBJECT-TYPE Maximum trasmit LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.38 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgTxLaserBiasCurrent OBJECT-TYPE Average LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.39 | Integer32 | read-only | current |
| jnxIfOpticsPMCurTemperature OBJECT-TYPE Temperature measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.40 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinTemperature OBJECT-TYPE Minimum Temperature measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.41 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxTemperature OBJECT-TYPE Maximum Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.42 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgTemperature OBJECT-TYPE Average Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.43 | Integer32 | read-only | current |
| jnxIfOpticsPMCurCarFreqOffset OBJECT-TYPE Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.44 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinCarFreqOffset OBJECT-TYPE Minimum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.45 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxCarFreqOffset OBJECT-TYPE Maximum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.46 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgCarFreqOffset OBJECT-TYPE Average Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.47 | Integer32 | read-only | current |
| jnxIfOpticsPMCurRxLaserBiasCurrent OBJECT-TYPE Received LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.48 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinRxLaserBiasCurrent OBJECT-TYPE Received Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.49 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxRxLaserBiasCurrent OBJECT-TYPE Received Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.50 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgRxLaserBiasCurrent OBJECT-TYPE Received Average LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.51 | Integer32 | read-only | current |
| jnxIfOpticsPMCurTecCurrent OBJECT-TYPE Received TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.52 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinTecCurrent OBJECT-TYPE Received Minimum TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.53 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxTecCurrent OBJECT-TYPE Received Maximum TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.54 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgTecCurrent OBJECT-TYPE Received Average TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.55 | Integer32 | read-only | current |
| jnxIfOpticsPMCurResidualDispersion OBJECT-TYPE Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.56 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinResidualDispersion OBJECT-TYPE Minimum Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.57 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxResidualDispersion OBJECT-TYPE Maximum Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.58 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgResidualDispersion OBJECT-TYPE Average Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.59 | Integer32 | read-only | current |
| jnxIfOpticsPMCurLevelHistogram OBJECT-TYPE The rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.60 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinLevelHistogram OBJECT-TYPE The Minimum rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.61 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxLevelHistogram OBJECT-TYPE The Maximum rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.62 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgLevelHistogram OBJECT-TYPE The Average rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.63 | Integer32 | read-only | current |
| jnxIfOpticsPMCurLaserFrequencyError OBJECT-TYPE Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.64 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinLaserFrequencyError OBJECT-TYPE Minimum Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.65 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxLaserFrequencyError OBJECT-TYPE Maximum Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.66 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgLaserFrequencyError OBJECT-TYPE Average Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.9.1.67 | Integer32 | read-only | current |
| jnxIfOpticsPMCurFECCorrectedErrorsMantissa OBJECT-TYPE Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.68 | Integer32 | read-only | current |
| jnxIfOpticsPMCurFECCorrectedErrorsExponent OBJECT-TYPE Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.69 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinFECCorrectedErrorsMantissa OBJECT-TYPE Minimum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.70 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinFECCorrectedErrorsExponent OBJECT-TYPE Minimum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.71 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxFECCorrectedErrorsMantissa OBJECT-TYPE Maximum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.72 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxFECCorrectedErrorsExponent OBJECT-TYPE Maximum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.73 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgFECCorrectedErrorsMantissa OBJECT-TYPE Average Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.74 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgFECCorrectedErrorsExponent OBJECT-TYPE Average Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.75 | Integer32 | read-only | current |
| jnxIfOpticsPMCurFECUCorrectedWordsMantissa OBJECT-TYPE Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.76 | Integer32 | read-only | current |
| jnxIfOpticsPMCurFECUCorrectedWordsExponent OBJECT-TYPE Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.77 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinFECUCorrectedWordsMantissa OBJECT-TYPE Minimum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.78 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMinFECUCorrectedWordsExponent OBJECT-TYPE Minimum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.79 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxFECUCorrectedWordsMantissa OBJECT-TYPE Maximum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.80 | Integer32 | read-only | current |
| jnxIfOpticsPMCurMaxFECUCorrectedWordsExponent OBJECT-TYPE Maximum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.81 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgFECUCorrectedWordsMantissa OBJECT-TYPE Average Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.82 | Integer32 | read-only | current |
| jnxIfOpticsPMCurAvgFECUCorrectedWordsExponent OBJECT-TYPE Average Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.9.1.83 | Integer32 | read-only | current |
| jnxIfOpticsPMIntervalTable OBJECT-TYPE A table of current PM entries. | 1.3.6.1.4.1.2636.3.71.1.2.10 | not-accessible | current | |
| jnxIfOpticsPMIntervalEntry OBJECT-TYPE A conceptual row that contains information about the PM Interval Table. | 1.3.6.1.4.1.2636.3.71.1.2.10.1 | not-accessible | current | |
| jnxIfOpticsPMIntervalLaneIndex OBJECT-TYPE This is the optics lane number. | 1.3.6.1.4.1.2636.3.71.1.2.10.1.1 | Unsigned32 (1..96) | not-accessible | current |
| jnxIfOpticsPMIntervalNumber OBJECT-TYPE This is the 15 mintute interavl number. | 1.3.6.1.4.1.2636.3.71.1.2.10.1.2 | Unsigned32 (1..96) | not-accessible | current |
| jnxIfOpticsPMIntMinChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.3 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.4 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.5 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinDiffGroupDelay OBJECT-TYPE Differential group delay measured at Rx Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.6 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxDiffGroupDelay OBJECT-TYPE Differential group delay measured at Rx Transceiver port -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.7 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgDiffGroupDelay OBJECT-TYPE Differential group delay measured at Rx Transceiver port -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.8 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinPolarState OBJECT-TYPE Polarization state -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.9 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxPolarState OBJECT-TYPE Polarization state -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.10 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgPolarState OBJECT-TYPE Polarization state -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.11 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.12 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.13 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.14 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinQ OBJECT-TYPE Q -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.15 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxQ OBJECT-TYPE Q -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.16 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgQ OBJECT-TYPE Q -- Avg in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.17 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinSNR OBJECT-TYPE SNR -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.18 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxSNR OBJECT-TYPE SNR -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.19 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgSNR OBJECT-TYPE SNR -- avg in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.20 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinTxOutputPower OBJECT-TYPE TxOutputPower -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.21 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxTxOutputPower OBJECT-TYPE TxOutputPower -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.22 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgTxOutputPower OBJECT-TYPE TxOutputPower -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.23 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinRxInputPower OBJECT-TYPE RxInputPower -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.24 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxRxInputPower OBJECT-TYPE RxInputPower -- max in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.25 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgRxInputPower OBJECT-TYPE RxInputPower -- average in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.26 | Integer32 | read-only | current |
| jnxIfOpticsPMIntTimeStamp OBJECT-TYPE Time stamp PM interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.27 | DateAndTime | read-only | current |
| jnxIfOpticsPMIntSuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.10.1.28 | TruthValue | read-only | current |
| jnxIfOpticsPMIntSuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts | 1.3.6.1.4.1.2636.3.71.1.2.10.1.29 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinTxLaserBiasCurrent OBJECT-TYPE Transmit Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.30 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxTxLaserBiasCurrent OBJECT-TYPE Transmit Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.31 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgTxLaserBiasCurrent OBJECT-TYPE Transmit Average LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.32 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinTemperature OBJECT-TYPE Minimum Temperature measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.33 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxTemperature OBJECT-TYPE Maximum Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.34 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgTemperature OBJECT-TYPE Average Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.35 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinCarFreqOffset OBJECT-TYPE Minimum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.36 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxCarFreqOffset OBJECT-TYPE Maximum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.37 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgCarFreqOffset OBJECT-TYPE Average Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.38 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinRxLaserBiasCurrent OBJECT-TYPE Receive Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.39 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxRxLaserBiasCurrent OBJECT-TYPE Receive Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.40 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgRxLaserBiasCurrent OBJECT-TYPE Receive Average LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.10.1.41 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinTecCurrent OBJECT-TYPE Received Minimum TecCurrent measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.42 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxTecCurrent OBJECT-TYPE Received Maximum TecCurrent measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.43 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgTecCurrent OBJECT-TYPE Received Average TecCurrent measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.44 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinResidualDispersion OBJECT-TYPE Minimum Residual Dispersion measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.45 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxResidualDispersion OBJECT-TYPE Maximum Residual Dispersion measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.46 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgResidualDispersion OBJECT-TYPE Average Residual Dispersion measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.47 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinLevelHistogram OBJECT-TYPE The Minimum rate of measured signal at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.48 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxLevelHistogram OBJECT-TYPE The Maximum rate of measured signal at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.49 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgLevelHistogram OBJECT-TYPE The Average rate of measured signal at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.50 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinLaserFrequencyError OBJECT-TYPE Minimum Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.51 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxLaserFrequencyError OBJECT-TYPE Maximum Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.52 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgLaserFrequencyError OBJECT-TYPE Average Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.53 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinFECCorrectedErrorsMantissa OBJECT-TYPE Minimum Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.54 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinFECCorrectedErrorsExponent OBJECT-TYPE Minimum Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.55 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxFECCorrectedErrorsMantissa OBJECT-TYPE Maximum Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.56 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxFECCorrectedErrorsExponent OBJECT-TYPE Maximum Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.57 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgFECCorrectedErrorsMantissa OBJECT-TYPE Average Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.58 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgFECCorrectedErrorsExponent OBJECT-TYPE Average Pre-FEC BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.59 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinFECUCorrectedWordsMantissa OBJECT-TYPE Minimum Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.60 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMinFECUCorrectedWordsExponent OBJECT-TYPE Minimum Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.61 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxFECUCorrectedWordsMantissa OBJECT-TYPE Maximum Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.62 | Integer32 | read-only | current |
| jnxIfOpticsPMIntMaxFECUCorrectedWordsExponent OBJECT-TYPE Maximum Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.63 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgFECUCorrectedWordsMantissa OBJECT-TYPE Average Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.64 | Integer32 | read-only | current |
| jnxIfOpticsPMIntAvgFECUCorrectedWordsExponent OBJECT-TYPE Average Uncorrected BER since last counter reset -- min in the 15 minute interval | 1.3.6.1.4.1.2636.3.71.1.2.10.1.65 | Integer32 | read-only | current |
| jnxIfOpticsPMDayTable OBJECT-TYPE A table of current PM Day entries. | 1.3.6.1.4.1.2636.3.71.1.2.11 | not-accessible | current | |
| jnxIfOpticsPMDayEntry OBJECT-TYPE A conceptual row that contains information about the PM Day Table | 1.3.6.1.4.1.2636.3.71.1.2.11.1 | not-accessible | current | |
| jnxIfOpticsPMDayLaneIndex OBJECT-TYPE This is the optics lane number. | 1.3.6.1.4.1.2636.3.71.1.2.11.1.1 | Unsigned32 (1..96) | not-accessible | current |
| jnxIfOpticsPMDayIndex OBJECT-TYPE This is 1 - cur day/ 2 - prev day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.2 | Unsigned32 (1..2) | not-accessible | current |
| jnxIfOpticsPMDayMinChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - min in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.3 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - max in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.4 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgChromaticDispersion OBJECT-TYPE Residual Chromatic Dispersion measured at Rx Transceiver port - average in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.5 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinDiffGroupDelay OBJECT-TYPE Differential Group Delay measured at Rx Transceiver port -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.6 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxDiffGroupDelay OBJECT-TYPE Differential Group Delay measured at Rx Transceiver port -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.7 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgDiffGroupDelay OBJECT-TYPE Differential Group Delay measured at Rx Transceiver port -- average in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.8 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinPolarState OBJECT-TYPE Polarization state -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.9 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxPolarState OBJECT-TYPE Polarization state -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.10 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgPolarState OBJECT-TYPE Polarization state -- average in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.11 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.12 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.13 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgPolarDependentLoss OBJECT-TYPE Polarization Dependent Loss -- average in the day interval | 1.3.6.1.4.1.2636.3.71.1.2.11.1.14 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinQ OBJECT-TYPE Q -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.15 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxQ OBJECT-TYPE Q -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.16 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgQ OBJECT-TYPE Q -- Avg in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.17 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinSNR OBJECT-TYPE SNR -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.18 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxSNR OBJECT-TYPE SNR -- max in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.19 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgSNR OBJECT-TYPE SNR -- avg in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.20 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinTxOutputPower OBJECT-TYPE TxOutputPower -- min in the day | 1.3.6.1.4.1.2636.3.71.1.2.11.1.21 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxTxOutputPower OBJECT-TYPE TxOutputPower -- max in the day. | 1.3.6.1.4.1.2636.3.71.1.2.11.1.22 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgTxOutputPower OBJECT-TYPE TxOutputPower -- average in the day. | 1.3.6.1.4.1.2636.3.71.1.2.11.1.23 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinRxInputPower OBJECT-TYPE RxInputPower -- min in the day. | 1.3.6.1.4.1.2636.3.71.1.2.11.1.24 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxRxInputPower OBJECT-TYPE RxInputPower -- max in the day. | 1.3.6.1.4.1.2636.3.71.1.2.11.1.25 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgRxInputPower OBJECT-TYPE RxInputPower -- average in the day. | 1.3.6.1.4.1.2636.3.71.1.2.11.1.26 | Integer32 | read-only | current |
| jnxIfOpticsPMDayTimeStamp OBJECT-TYPE Time for the Day. | 1.3.6.1.4.1.2636.3.71.1.2.11.1.27 | DateAndTime | read-only | current |
| jnxIfOpticsPMDaySuspectedFlag OBJECT-TYPE If true, the data in this entry may be unreliable. | 1.3.6.1.4.1.2636.3.71.1.2.11.1.28 | TruthValue | read-only | current |
| jnxIfOpticsPMDaySuspectReason OBJECT-TYPE If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - partial data 7 - one or more intervals are invaild | 1.3.6.1.4.1.2636.3.71.1.2.11.1.29 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinTxLaserBiasCurrent OBJECT-TYPE Transmit LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.30 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxTxLaserBiasCurrent OBJECT-TYPE Transmit Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.31 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgTxLaserBiasCurrent OBJECT-TYPE Transmit Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.32 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinTemperature OBJECT-TYPE Minimum Temperature measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.33 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxTemperature OBJECT-TYPE Maximum Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.34 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgTemperature OBJECT-TYPE Average Temperature measure at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.35 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinCarFreqOffset OBJECT-TYPE Minimum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.36 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxCarFreqOffset OBJECT-TYPE Maximum Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.37 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgCarFreqOffset OBJECT-TYPE Average Carrier frequency offset measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.38 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinRxLaserBiasCurrent OBJECT-TYPE Receive LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.39 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxRxLaserBiasCurrent OBJECT-TYPE Receive Minimum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.40 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgRxLaserBiasCurrent OBJECT-TYPE Receive Maximum LaserBiasCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.41 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinTecCurrent OBJECT-TYPE Received Minimum TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.42 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxTecCurrent OBJECT-TYPE Received Maximum TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.43 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgTecCurrent OBJECT-TYPE Received Average TecCurrent measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.44 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinResidualDispersion OBJECT-TYPE Minimum Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.45 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxResidualDispersion OBJECT-TYPE Maximum Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.46 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgResidualDispersion OBJECT-TYPE Average Residual Dispersion measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.47 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinLevelHistogram OBJECT-TYPE The Minimum rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.48 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxLevelHistogram OBJECT-TYPE The Maximum rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.49 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgLevelHistogram OBJECT-TYPE The Average rate of measured signal at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.50 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinLaserFrequencyError OBJECT-TYPE Minimum Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.51 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxLaserFrequencyError OBJECT-TYPE Maximum Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.52 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgLaserFrequencyError OBJECT-TYPE Average Laser Frequency Error measured at Transceiver port | 1.3.6.1.4.1.2636.3.71.1.2.11.1.53 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinFECCorrectedErrorsMantissa OBJECT-TYPE Minimum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.54 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinFECCorrectedErrorsExponent OBJECT-TYPE Minimum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.55 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxFECCorrectedErrorsMantissa OBJECT-TYPE Maximum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.56 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxFECCorrectedErrorsExponent OBJECT-TYPE Maximum Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.57 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgFECCorrectedErrorsMantissa OBJECT-TYPE Average Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.58 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgFECCorrectedErrorsExponent OBJECT-TYPE Average Pre-FEC BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.59 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinFECUCorrectedWordsMantissa OBJECT-TYPE Minimum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.60 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMinFECUCorrectedWordsExponent OBJECT-TYPE Minimum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.61 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxFECUCorrectedWordsMantissa OBJECT-TYPE Maximum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.62 | Integer32 | read-only | current |
| jnxIfOpticsPMDayMaxFECUCorrectedWordsExponent OBJECT-TYPE Maximum Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.63 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgFECUCorrectedWordsMantissa OBJECT-TYPE Average Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.64 | Integer32 | read-only | current |
| jnxIfOpticsPMDayAvgFECUCorrectedWordsExponent OBJECT-TYPE Average Uncorrected BER since last counter reset | 1.3.6.1.4.1.2636.3.71.1.2.11.1.65 | Integer32 | read-only | current |
| jnxOpticsAlarm OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.71.1.3 | |||
| jnxOpticsNotificationTable OBJECT-TYPE A table of Notification entries. | 1.3.6.1.4.1.2636.3.71.1.3.1 | not-accessible | current | |
| jnxOpticsNotificationEntry OBJECT-TYPE A conceptual entry in the Notification table. | 1.3.6.1.4.1.2636.3.71.1.3.1.1 | not-accessible | current | |
| jnxOpticsNotificationLocation OBJECT-TYPE The object identifies indicates if this entry was for Near end/Far end. | 1.3.6.1.4.1.2636.3.71.1.3.1.1.1 | JnxOpticsLocation | accessible-for-notify | current |
| jnxOpticsNotificationDirection OBJECT-TYPE The object identifies indicates if this entry was for for the Tx/Rx or both. | 1.3.6.1.4.1.2636.3.71.1.3.1.1.2 | JnxOpticsDirection | accessible-for-notify | current |
| jnxOpticsLastNotificationId OBJECT-TYPE The object identifies the OTN alarm that most recently was set or cleared. | 1.3.6.1.4.1.2636.3.71.1.3.1.1.3 | JnxOpticsNotificationId | accessible-for-notify | current |
| jnxOpticsNotificationSeverity OBJECT-TYPE The object identifies the severity of the last alarm/alert that most recently was set or cleared. | 1.3.6.1.4.1.2636.3.71.1.3.1.1.4 | JnxOpticsSeverity | accessible-for-notify | current |
| jnxOpticsNotificationDate OBJECT-TYPE This specifies the date and time when this alarm occurred. | 1.3.6.1.4.1.2636.3.71.1.3.1.1.5 | DateAndTime | accessible-for-notify | current |
| jnxOpticsNotificationLaneIndex OBJECT-TYPE The lane index associated with this subject.. eg port. | 1.3.6.1.4.1.2636.3.71.1.3.1.1.6 | Integer32 (1..1024) | not-accessible | current |
| jnxOpticsOCh2 OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.71.1.4 | |||
| jnxOpticsOCh2ConfigTable OBJECT-TYPE Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the optics config Table. | 1.3.6.1.4.1.2636.3.71.1.4.1 | not-accessible | obsolete | |
| jnxOpticsOCh2ConfigEntry OBJECT-TYPE A conceptual row that contains information about the optics config OCh2 Table. | 1.3.6.1.4.1.2636.3.71.1.4.1.1 | not-accessible | obsolete | |
| jnxOpticsOCh2CfgContIndex OBJECT-TYPE The Contianer index associated with this subject | 1.3.6.1.4.1.2636.3.71.1.4.1.1.1 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2CfgL1Index OBJECT-TYPE FPC slot number of the interface | 1.3.6.1.4.1.2636.3.71.1.4.1.1.2 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2CfgL2Index OBJECT-TYPE PIC slot number of the interface | 1.3.6.1.4.1.2636.3.71.1.4.1.1.3 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2CfgL3Index OBJECT-TYPE Port number of the interface | 1.3.6.1.4.1.2636.3.71.1.4.1.1.4 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2CfgL4Index OBJECT-TYPE Sub-Port number of the interface | 1.3.6.1.4.1.2636.3.71.1.4.1.1.5 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2Type OBJECT-TYPE 0 - none 1 - SFP 2 - XFP 3 - SFP+ 4 - XFP+ 5 - CFP 6 - CFP+ 7 - Non pluggable | 1.3.6.1.4.1.2636.3.71.1.4.1.1.6 | Integer32 | read-only | obsolete |
| jnxOpticsOCh2LaserEnable OBJECT-TYPE 0 - laser off 1 - laser on | 1.3.6.1.4.1.2636.3.71.1.4.1.1.7 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2Wavelength OBJECT-TYPE The transmit wavelength of the laser. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.8 | Unsigned32 | read-write | obsolete |
| jnxOpticsOCh2Spacing OBJECT-TYPE A minimum nominal difference in frequency (GHz) between two adjacent channels. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.9 | JnxOpticsChannelSpacing | read-only | obsolete |
| jnxOpticsOCh2Modulation OBJECT-TYPE Modulation Unknown - (1), NonPSK - (2), ODB - (3), DPSK - (4), QPSK - (5), DQPSK - (6), DPQPSK - (7), 16QAM - (8), 64QAM - (9), 256QAM - (10) | 1.3.6.1.4.1.2636.3.71.1.4.1.1.10 | Unsigned32 | read-only | obsolete |
| jnxOpticsOCh2TxOpticalPower OBJECT-TYPE Transmit optical power. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.11 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2RxOpticalPower OBJECT-TYPE Receive optical power. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.12 | Integer32 | read-only | obsolete |
| jnxOpticsOCh2ModTempHighThresh OBJECT-TYPE High module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.13 | Integer32 | read-only | obsolete |
| jnxOpticsOCh2ModTempLowThresh OBJECT-TYPE Low module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.14 | Integer32 | read-only | obsolete |
| jnxOpticsOCh2TxPowHighThresh OBJECT-TYPE Tx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.15 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2TxPowLowThresh OBJECT-TYPE Tx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.16 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2RxPowHighThresh OBJECT-TYPE Rx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.17 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2RxPowLowThresh OBJECT-TYPE Rx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.18 | Integer32 | read-write | obsolete |
| jnxOpticsOCh24HourModTemHiThresh OBJECT-TYPE High module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.19 | Integer32 | read-only | obsolete |
| jnxOpticsOCh24HourModTemLoThresh OBJECT-TYPE Low module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.20 | Integer32 | read-only | obsolete |
| jnxOpticsOCh24HourTxPowHiThresh OBJECT-TYPE Tx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.21 | Integer32 | read-write | obsolete |
| jnxOpticsOCh24HourTxPowLoThresh OBJECT-TYPE Tx for a 24 hour period Power below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.22 | Integer32 | read-write | obsolete |
| jnxOpticsOCh24HourRxPowHiThresh OBJECT-TYPE Rx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.23 | Integer32 | read-write | obsolete |
| jnxOpticsOCh24HourRxPowLoThresh OBJECT-TYPE Rx Power for a 24 hour period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.24 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2RxLosPowWarnThresh OBJECT-TYPE Rx Power warning threshold for seeting the optical LOS warning. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.25 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2RxLosPowAlarmThresh OBJECT-TYPE Rx Power alarm threshold for seeting the optical LOS warning. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.26 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2CurrentStatus OBJECT-TYPE | 1.3.6.1.4.1.2636.3.71.1.4.1.1.27 | Bits {opticalLos(1), wavelenthLockErr(2), powerHighAlarm(3), powerLowAlarm(4), biasCurrentHighAlarm(5), biasCurrentLowAlarm(6), temperatureHighAlarm(7), temperaturelowAlarm(8), txPLLLockAlarm(9), rxPLLLockAlarm(10), avgPowerAlarm(11), rxLossAvgPowerAlarm(12), lossofACPowerAlarm(13), txPowerHighThreshAlert(14), txPowerLowThreshAlert(15), rxPowerHighThreshAlert(16), rxPowerLowThreshAlert(17), moduleTempHighThreshAlert(18), moduleTempLowThreshAlert(19), txPowerHigh24HourThreshAlert(20), txPowerLow24HourThreshAlert(21), rxPowerHigh24HourThreshAlert(22), rxPowerLow24HourThreshAlert(23), moduleTempHigh24HourThreshAlert(24), moduleTempLow24HourThreshAlert(25), powerRxHighAlarm(26), powerRxLowAlarm(27), powerTxHighWarning(28), powerTxLowWarning(29), powerRxHighWarning(30), powerRxLowWarning(31), temperatureHighWarning(32), temperaturelowWarning(33)} | read-only | obsolete |
| jnxOpticsOCh2TxPowHiEnableTCA OBJECT-TYPE Enable/Disable for the Tx Power High TCA. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.28 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2TxPowLoEnableTCA OBJECT-TYPE Enable/Disable for the Tx Power Low TCA. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.29 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2RxPowHiEnableTCA OBJECT-TYPE Enable/Disable for the Rx Power High TCA. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.30 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2RxPowLoEnableTCA OBJECT-TYPE Enable/Disable for the Rx Power Low TCA. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.31 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2ModTempHiEnableTCA OBJECT-TYPE Enable/Disable for the Module Temp High TCA. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.32 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2ModTempLoEnableTCA OBJECT-TYPE Enable/Disable for the Module Temp Low TCA. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.33 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2CarFreqOffHiEnTCA OBJECT-TYPE Enable/Disable for the Carrier Frequency Offset High TCA. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.34 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2CarFreqOffLoEnTCA OBJECT-TYPE Enable/Disable for the CarrierFreqOffetLow TCA's. | 1.3.6.1.4.1.2636.3.71.1.4.1.1.35 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2CarFreqOffHiThresh OBJECT-TYPE Carrier frequency offset for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.36 | Integer32 | read-write | obsolete |
| jnxOpticsOCh24HourCarFreqOffHiTh OBJECT-TYPE Carrier frequency offset for a 24 Hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.37 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2CarFreqOffLoThresh OBJECT-TYPE Carrier frequency offset for a 15 minute period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.38 | Integer32 | read-write | obsolete |
| jnxOpticsOCh24HourCarFreqOffLoTh OBJECT-TYPE Carrier frequency offset for a 24 Hour period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . | 1.3.6.1.4.1.2636.3.71.1.4.1.1.39 | Integer32 | read-write | obsolete |
| jnxOpticsOCh2TraceToneCfgTable OBJECT-TYPE Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the optics tests. | 1.3.6.1.4.1.2636.3.71.1.4.2 | not-accessible | obsolete | |
| jnxOpticsOCh2TraceToneCfgEntry OBJECT-TYPE Information about the optics FRU's. | 1.3.6.1.4.1.2636.3.71.1.4.2.1 | not-accessible | obsolete | |
| jnxOpticsOCh2TraceToneCfgIndx OBJECT-TYPE Container Index associated with this subject.. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.1 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2TraceToneCfgL1Indx OBJECT-TYPE FPC Slot number of the interface. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.2 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2TraceToneCfgL2Indx OBJECT-TYPE PIC Slot number of the interface. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.3 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2TraceToneCfgL3Indx OBJECT-TYPE Port number of the interface. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.4 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2TraceToneCfgL4Indx OBJECT-TYPE Sub-Port number of the interface. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.5 | Integer32 (1..1024) | not-accessible | obsolete |
| jnxOpticsOCh2TraceToneCfgTxEn OBJECT-TYPE This will enable/disable the transmit Trace tone feature. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.6 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2TraceToneCfgRxEn OBJECT-TYPE This will enable/disable the receive Trace tone feature. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.7 | TruthValue | read-write | obsolete |
| jnxOpticsOCh2TraceToneCfgDestId OBJECT-TYPE This is the destination Id of the link ID/ the chassis and the blade. The transmit messages will also have the src id which is this chassis id and this port info. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.8 | OCTET STRING | read-write | obsolete |
| jnxOpticsOCh2TraceToneCfgTxMsg OBJECT-TYPE This will be the transmit data in the tracetone message. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.9 | OCTET STRING | read-write | obsolete |
| jnxOpticsOCh2TraceToneCfgRxMsg OBJECT-TYPE This will be the receive data in the trace tone message. | 1.3.6.1.4.1.2636.3.71.1.4.2.1.10 | OCTET STRING | read-only | obsolete |
| jnxIplcAlarm OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.71.1.5 | |||
| jnxIplcNotificationTable OBJECT-TYPE A table of Notification entries. | 1.3.6.1.4.1.2636.3.71.1.5.1 | not-accessible | current | |
| jnxIplcNotificationEntry OBJECT-TYPE A conceptual entry in the Notification table. | 1.3.6.1.4.1.2636.3.71.1.5.1.1 | not-accessible | current | |
| jnxIplcNotificationLocation OBJECT-TYPE The object identifies indicates if this entry was for Near end/Far end. | 1.3.6.1.4.1.2636.3.71.1.5.1.1.1 | JnxOpticsLocation | accessible-for-notify | current |
| jnxIplcNotificationDirection OBJECT-TYPE The object identifies indicates if this entry was for for the Tx/Rx or both. | 1.3.6.1.4.1.2636.3.71.1.5.1.1.2 | JnxOpticsDirection | accessible-for-notify | current |
| jnxIplcNotificationSlot OBJECT-TYPE The object identifies indicates if this entry was for slot id. | 1.3.6.1.4.1.2636.3.71.1.5.1.1.3 | Integer32 (1..1024) | accessible-for-notify | current |
| jnxIplcNotificationChannel OBJECT-TYPE The object identifies indicates if this entry was for Channel id. | 1.3.6.1.4.1.2636.3.71.1.5.1.1.4 | Integer32 (1..1024) | accessible-for-notify | current |
| jnxIplcLastNotificationId OBJECT-TYPE The object identifies the IPLC alarm that most recently was set or cleared. | 1.3.6.1.4.1.2636.3.71.1.5.1.1.5 | JnxIplcNotificationId | accessible-for-notify | current |
| jnxIplcNotificationSeverity OBJECT-TYPE The object identifies the severity of the last alarm/alert that most recently was set or cleared. | 1.3.6.1.4.1.2636.3.71.1.5.1.1.6 | JnxOpticsSeverity | accessible-for-notify | current |
| jnxIplcNotificationDate OBJECT-TYPE This specifies the date and time when this alarm occurred. | 1.3.6.1.4.1.2636.3.71.1.5.1.1.7 | DateAndTime | accessible-for-notify | current |
| jnxIlaAlarm OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.71.1.6 | |||
| jnxIlaNotificationTable OBJECT-TYPE A table of Notification entries. | 1.3.6.1.4.1.2636.3.71.1.6.1 | not-accessible | current | |
| jnxIlaNotificationEntry OBJECT-TYPE A conceptual entry in the Notification table. | 1.3.6.1.4.1.2636.3.71.1.6.1.1 | not-accessible | current | |
| jnxIlaNotificationLocation OBJECT-TYPE The object identifies indicates if this entry was for Near end/Far end. | 1.3.6.1.4.1.2636.3.71.1.6.1.1.1 | JnxOpticsLocation | accessible-for-notify | current |
| jnxIlaNotificationDirection OBJECT-TYPE The object identifies indicates if this entry was for for the Tx/Rx or both. | 1.3.6.1.4.1.2636.3.71.1.6.1.1.2 | JnxOpticsDirection | accessible-for-notify | current |
| jnxIlaNotificationSlot OBJECT-TYPE The object identifies indicates if this entry was for slot id. | 1.3.6.1.4.1.2636.3.71.1.6.1.1.3 | Integer32 (1..1024) | accessible-for-notify | current |
| jnxIlaNotificationIlaID OBJECT-TYPE The object identifies indicates if this entry was for the ILA id. | 1.3.6.1.4.1.2636.3.71.1.6.1.1.4 | Integer32 (1..1024) | accessible-for-notify | current |
| jnxIlaLastNotificationId OBJECT-TYPE The object identifies the Ila alarm that most recently was set or cleared. | 1.3.6.1.4.1.2636.3.71.1.6.1.1.5 | JnxIlaNotificationId | accessible-for-notify | current |
| jnxIlaNotificationSeverity OBJECT-TYPE The object identifies the severity of the last alarm/alert that most recently was set or cleared. | 1.3.6.1.4.1.2636.3.71.1.6.1.1.6 | JnxOpticsSeverity | accessible-for-notify | current |
| jnxIlaNotificationDate OBJECT-TYPE This specifies the date and time when this alarm occurred. | 1.3.6.1.4.1.2636.3.71.1.6.1.1.7 | DateAndTime | accessible-for-notify | current |
| jnxOpticsNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.2636.4.22.0 | |||
| jnxIplcNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.2636.4.28.0 | |||
| jnxIlaNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.2636.4.29.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| jnxOpticsNotificationSet NOTIFICATION-TYPE Notification of a recently set optics alarm. | 1.3.6.1.4.1.2636.4.22.0.1 | current |
| jnxOpticsNotificationCleared NOTIFICATION-TYPE Notification of a recently cleared optics alarm. | 1.3.6.1.4.1.2636.4.22.0.2 | current |
| jnxIfOpticsNotificationAdminStatus NOTIFICATION-TYPE Notification of the admin state of the optics interface. | 1.3.6.1.4.1.2636.4.22.0.3 | current |
| jnxIfOpticsNotificationOperStatus NOTIFICATION-TYPE Notification of operational state of the optics interface | 1.3.6.1.4.1.2636.4.22.0.4 | current |
| jnxIplcNotificationSet NOTIFICATION-TYPE Notification of a recently set iplc alarm. | 1.3.6.1.4.1.2636.4.28.0.1 | current |
| jnxIplcNotificationCleared NOTIFICATION-TYPE Notification of a recently cleared iplc alarm. | 1.3.6.1.4.1.2636.4.28.0.2 | current |
| jnxIlaNotificationSet NOTIFICATION-TYPE Notification of a recently set iplc alarm. | 1.3.6.1.4.1.2636.4.29.0.1 | current |
| jnxIlaNotificationCleared NOTIFICATION-TYPE Notification of a recently cleared iplc alarm. | 1.3.6.1.4.1.2636.4.29.0.2 | current |