JUNIPER-DFC-MIB
- Registered at
- 1.3.6.1.4.1.2636.3.331.3.6.1.4.1.2636.4.11.0
- Last updated
- 2005-07-08 21:53
- Organization
- Juniper Networks, Inc.
- Namespace
- juniper
- Source file
JUNIPER-DFC-MIB- Digest
sha256:15a05037f626af2df6c2285f110d44c73636ffa76c9754ff8155fddffa07a25b
Description
This is Juniper Networks' implementation of enterprise specific MIB for Dynamic Flow Capture (DFC)
Contact
Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| JUNIPER-SMI | jnxDfcNotifications, jnxMibs |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter64, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB JUNIPER-DFC-MIB JUNIPER-SMI SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxDfcCSTable OBJECT-TYPE Statistics information for Control Source. | 1.3.6.1.4.1.2636.3.33.1 | not-accessible | current | |
| jnxDfcCSEntry OBJECT-TYPE An entry of DFC Control Source table. | 1.3.6.1.4.1.2636.3.33.1.1 | not-accessible | current | |
| jnxDfcGrpName OBJECT-TYPE The name assigned to a DFC group. A DFC group defines a set of DFC PICs that share same static/dynamic configuration. | 1.3.6.1.4.1.2636.3.33.1.1.1 | DisplayString (SIZE(0..64)) | not-accessible | current |
| jnxDfcCSId OBJECT-TYPE Control Source identifier. Control Source identifies Juniper router with one unique Control IP address. There can be multiple IP addresses from which a Control Source can send Control protocol request to Juniper router. | 1.3.6.1.4.1.2636.3.33.1.1.2 | DisplayString (SIZE(0..48)) | not-accessible | current |
| jnxDfcCSControlProtocolAddRequests OBJECT-TYPE Total number of Control protocol Add requests received. The add request specifies a new filter criteria to be merged with the existing tasking list for a given Control Source and Content Destination. | 1.3.6.1.4.1.2636.3.33.1.1.3 | Counter64 | read-only | current |
| jnxDfcCSCriteriaAdded OBJECT-TYPE Total number of filter criteria added successfully by the Control Source. | 1.3.6.1.4.1.2636.3.33.1.1.4 | Counter64 | read-only | current |
| jnxDfcCSCriteriaAdditionFailed OBJECT-TYPE Total number of filter criteria addition failed. | 1.3.6.1.4.1.2636.3.33.1.1.5 | Counter64 | read-only | current |
| jnxDfcCSControlProtocolDeleteRequests OBJECT-TYPE Total number of Control protocol delete requests received. The delete request removes a particular filter criterion. | 1.3.6.1.4.1.2636.3.33.1.1.6 | Counter64 | read-only | current |
| jnxDfcCSCriteriaDeleted OBJECT-TYPE Total number of filter criteria deleted successfully as requested by Control Source. | 1.3.6.1.4.1.2636.3.33.1.1.7 | Counter64 | read-only | current |
| jnxDfcCSCriteriaDeletionFailed OBJECT-TYPE Total number of filter criteria deletion failed. | 1.3.6.1.4.1.2636.3.33.1.1.8 | Counter64 | read-only | current |
| jnxDfcCSCriteriaDeletedTimeoutIdle OBJECT-TYPE Total number of criteria deleted by timeout idle. | 1.3.6.1.4.1.2636.3.33.1.1.9 | Counter64 | read-only | current |
| jnxDfcCSCriteriaDeletedTimeoutTotal OBJECT-TYPE Total number of criteria deleted by timeout total. | 1.3.6.1.4.1.2636.3.33.1.1.10 | Counter64 | read-only | current |
| jnxDfcCSCriteriaDeletedPackets OBJECT-TYPE Total number of criteria deleted by packets. | 1.3.6.1.4.1.2636.3.33.1.1.11 | Counter64 | read-only | current |
| jnxDfcCSCriteriaDeletedBytes OBJECT-TYPE Total number of criteria deleted by bytes. | 1.3.6.1.4.1.2636.3.33.1.1.12 | Counter64 | read-only | current |
| jnxDfcCSControlProtocolRefreshRequests OBJECT-TYPE Total number of Control protocol Refresh requests received. The refresh request updates the timeout for a particular filter criterion or set of filter criteria for the particular Control Source to a particular Content Destination. | 1.3.6.1.4.1.2636.3.33.1.1.13 | Counter64 | read-only | current |
| jnxDfcCSCriteriaRefreshed OBJECT-TYPE Total number of filter criteria refreshed successfully as requested by Control Source. | 1.3.6.1.4.1.2636.3.33.1.1.14 | Counter64 | read-only | current |
| jnxDfcCSCriteriaRefreshFailed OBJECT-TYPE Total number of filter criteria refresh request failed. | 1.3.6.1.4.1.2636.3.33.1.1.15 | Counter64 | read-only | current |
| jnxDfcCSControlProtocolListRequests OBJECT-TYPE Total number of Control protocol List requests received. The List request returns a list of all criteria that a particular Control Source has added and are currently active. | 1.3.6.1.4.1.2636.3.33.1.1.16 | Counter64 | read-only | current |
| jnxDfcCSListSuccess OBJECT-TYPE Total number of list commands processed successfully as requested by Control Source. | 1.3.6.1.4.1.2636.3.33.1.1.17 | Counter64 | read-only | current |
| jnxDfcCSListFailed OBJECT-TYPE Total number of list commands that could not be processed successfully. | 1.3.6.1.4.1.2636.3.33.1.1.18 | Counter64 | read-only | current |
| jnxDfcCSControlProtocolNoopRequests OBJECT-TYPE Total number of Control protocol Noop requests received. The purpose of this request is to verify the end-to-end connectivity between Control Source and DFC PIC. | 1.3.6.1.4.1.2636.3.33.1.1.19 | Counter64 | read-only | current |
| jnxDfcCSNoopSuccess OBJECT-TYPE Total number of Noop requests processed successfully as requested by Control Source. | 1.3.6.1.4.1.2636.3.33.1.1.20 | Counter64 | read-only | current |
| jnxDfcCSNoopFailed OBJECT-TYPE Total number of Noop requests that could not be processed successfully. | 1.3.6.1.4.1.2636.3.33.1.1.21 | Counter64 | read-only | current |
| jnxDfcCSDynamicCriteriaActive OBJECT-TYPE Total number of active dynamic filter criteria. | 1.3.6.1.4.1.2636.3.33.1.1.22 | Counter64 | read-only | current |
| jnxDfcCSStaticCriteriaActive OBJECT-TYPE Total number of active static filter criteria. | 1.3.6.1.4.1.2636.3.33.1.1.23 | Counter64 | read-only | current |
| jnxDfcCSBadRequest OBJECT-TYPE Total number of Bad requests received. | 1.3.6.1.4.1.2636.3.33.1.1.24 | Counter64 | read-only | current |
| jnxDfcCSResponseSuccessful OBJECT-TYPE Total number of successful response(s) corresponding to the requests (add, delete, refresh, list and noop) sent out to the Control Source. | 1.3.6.1.4.1.2636.3.33.1.1.25 | Counter64 | read-only | current |
| jnxDfcCSResponseImproperCriteria OBJECT-TYPE Total number of response(s) generated because of improper filter criterion specification in the add request. | 1.3.6.1.4.1.2636.3.33.1.1.26 | Counter64 | read-only | current |
| jnxDfcCSResponseUnknownContentDest OBJECT-TYPE Total number of response(s) generated because of unknown Content Destination specified in the add, delete, refresh and list request. | 1.3.6.1.4.1.2636.3.33.1.1.27 | Counter64 | read-only | current |
| jnxDfcCSResponseUnknownCriteriaId OBJECT-TYPE Total number of response(s) generated because of unknown Criteria Identifier specified in the delete, refresh and list request. | 1.3.6.1.4.1.2636.3.33.1.1.28 | Counter64 | read-only | current |
| jnxDfcCSResponseImproperTimeout OBJECT-TYPE Total number of response(s) generated because of improper timeout specified in the add and refresh request. | 1.3.6.1.4.1.2636.3.33.1.1.29 | Counter64 | read-only | current |
| jnxDfcCSResponseInvalidAuthentication OBJECT-TYPE Total number of response(s) generated because of invalid authentication specified in the add, delete, refresh, list and noop request. | 1.3.6.1.4.1.2636.3.33.1.1.30 | Counter64 | read-only | current |
| jnxDfcCSResponseInvalidSequenceNumber OBJECT-TYPE Total number of response(s) generated because of invalid Sequence Number specified in the add, delete, refresh, list and noop request. | 1.3.6.1.4.1.2636.3.33.1.1.31 | Counter64 | read-only | current |
| jnxDfcCSResponseInternalError OBJECT-TYPE Total number of response(s) generated because of internal error at the DFC PIC in processing a request. | 1.3.6.1.4.1.2636.3.33.1.1.32 | Counter64 | read-only | current |
| jnxDfcCSNotificationRestart OBJECT-TYPE Total number of Restart notifications sent to configured notification-recipients. This notification will be generated when the system experiences a failure such that all the DFC filter criteria are lost. | 1.3.6.1.4.1.2636.3.33.1.1.33 | Counter64 | read-only | current |
| jnxDfcCSNotificationRollover OBJECT-TYPE Total number of Rollover notifications sent to configured notification-recipients. This notification will be generated when the DFC PIC experiences a sequence number rollover. | 1.3.6.1.4.1.2636.3.33.1.1.34 | Counter64 | read-only | current |
| jnxDfcCSNotificationNoop OBJECT-TYPE Total number of Noop notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC receives a Noop message with the SendAsync parameter present. | 1.3.6.1.4.1.2636.3.33.1.1.35 | Counter64 | read-only | current |
| jnxDfcCSNotificationTimeout OBJECT-TYPE Total number of Timeout notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC times out a filter criterion on any one of its configured timeout parameters and the criterion contains a SendTimeoutAsync parameter. | 1.3.6.1.4.1.2636.3.33.1.1.36 | Counter64 | read-only | current |
| jnxDfcCSNotificationCongestion OBJECT-TYPE Total number of Congestion notifications sent to configured notification-recipents. This notification will be generated when the 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Destination exceeds the configured soft limit for that destination. | 1.3.6.1.4.1.2636.3.33.1.1.37 | Counter64 | read-only | current |
| jnxDfcCSNotificationCongestionDelete OBJECT-TYPE Total number of Congestion Delete notifications sent to configured notification-recipents. This notification will be generated when the total 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Destination exceeds the configured hard limit for that destination. | 1.3.6.1.4.1.2636.3.33.1.1.38 | Counter64 | read-only | current |
| jnxDfcCSNotificationDuplicatesDropped OBJECT-TYPE Total number of Duplicates Dropped notifications sent to configured notification-recipents. This notification will be generated when the configurable Maximum Duplicates parameter has been exceeded in such a way as to cause packets matching criteria added by the corresponding Control Source to be dropped. | 1.3.6.1.4.1.2636.3.33.1.1.39 | Counter64 | read-only | current |
| jnxDfcCSAddRequestRate OBJECT-TYPE The request processing rate (requests processed/second). | 1.3.6.1.4.1.2636.3.33.1.1.40 | Counter64 | read-only | current |
| jnxDfcCSAddRequestPeakRate OBJECT-TYPE The peak request processing rate (requests processed/second). | 1.3.6.1.4.1.2636.3.33.1.1.41 | Counter64 | read-only | current |
| jnxDfcCSAggrCriteriaBandwidth OBJECT-TYPE Bandwidth in bits/second. | 1.3.6.1.4.1.2636.3.33.1.1.42 | Counter64 | read-only | current |
| jnxDfcCSSequenceNumber OBJECT-TYPE Protocol sequence number. | 1.3.6.1.4.1.2636.3.33.1.1.43 | Counter64 | read-only | current |
| jnxDfcCDTable OBJECT-TYPE Statistics information for content destination. | 1.3.6.1.4.1.2636.3.33.2 | not-accessible | current | |
| jnxDfcCDEntry OBJECT-TYPE An entry of DFC Content-Destination table. | 1.3.6.1.4.1.2636.3.33.2.1 | not-accessible | current | |
| jnxDfcCDId OBJECT-TYPE Content Destination identifier. A Content Destination is the recipient of the extracted data, once it is forwarded by the Server. | 1.3.6.1.4.1.2636.3.33.2.1.1 | DisplayString (SIZE(0..48)) | not-accessible | current |
| jnxDfcCDCriteria OBJECT-TYPE Total number of filter criteria configured for the Content Destination. | 1.3.6.1.4.1.2636.3.33.2.1.2 | Counter64 | read-only | current |
| jnxDfcCDByteRate OBJECT-TYPE Average data rate (in bytes/second) summed over all active filter criteria to a configured Content Destination. | 1.3.6.1.4.1.2636.3.33.2.1.3 | Counter64 | read-only | current |
| jnxDfcCDMatchedPackets OBJECT-TYPE Total number of packets matching the filter criteria configured for the Content Destination. | 1.3.6.1.4.1.2636.3.33.2.1.4 | Counter64 | read-only | current |
| jnxDfcCDMatchedBytes OBJECT-TYPE Total number of bytes matching the filter criteria configured for the Content Destination. | 1.3.6.1.4.1.2636.3.33.2.1.5 | Counter64 | read-only | current |
| jnxDfcCDCongestionNotification OBJECT-TYPE Total number of Congestion Notifications sent to a configured notification-recipient. | 1.3.6.1.4.1.2636.3.33.2.1.6 | Counter64 | read-only | current |
| jnxDfcNotifyVars OBJECT-IDENTITY Notification object definitions. | 1.3.6.1.4.1.2636.3.33.3 | current | ||
| jnxDfcInterfaceName OBJECT-TYPE The textual name of the DFC interface. | 1.3.6.1.4.1.2636.3.33.3.1 | DisplayString | accessible-for-notify | current |
| jnxDfcInputPktRate OBJECT-TYPE data packet rate (in packets per second). | 1.3.6.1.4.1.2636.3.33.3.2 | Unsigned32 | accessible-for-notify | current |
| jnxDfcPpsSoftOverloadLowWatermark OBJECT-TYPE Configured lowest value for data packet rate (in packets per second). | 1.3.6.1.4.1.2636.3.33.3.3 | Unsigned32 | accessible-for-notify | current |
| jnxDfcPpsSoftOverloadHighWatermark OBJECT-TYPE Configured highest value for data packet rate (in packets per second). | 1.3.6.1.4.1.2636.3.33.3.4 | Unsigned32 | accessible-for-notify | current |
| jnxDfcPpsHardOverloadLowWatermark OBJECT-TYPE Recommended lowest value for data packet rate (in packets per second). | 1.3.6.1.4.1.2636.3.33.3.5 | Unsigned32 | accessible-for-notify | current |
| jnxDfcPpsHardOverloadHighWatermark OBJECT-TYPE Recommended highest value for data packet rate (in packets per second). | 1.3.6.1.4.1.2636.3.33.3.6 | Unsigned32 | accessible-for-notify | current |
| jnxDfcFlowsUsage OBJECT-TYPE % usage of total number of flows in system. | 1.3.6.1.4.1.2636.3.33.3.7 | Unsigned32 | accessible-for-notify | current |
| jnxDfcCriteriaUsage OBJECT-TYPE % usage of matching criteria for all filters. | 1.3.6.1.4.1.2636.3.33.3.8 | Unsigned32 | accessible-for-notify | current |
| jnxDfcMemSoftOverloadLowWatermark OBJECT-TYPE Configured lowest watermark percent for memory load. | 1.3.6.1.4.1.2636.3.33.3.9 | Unsigned32 | accessible-for-notify | current |
| jnxDfcMemSoftOverloadHighWatermark OBJECT-TYPE Configured highest watermark percent for memory load. | 1.3.6.1.4.1.2636.3.33.3.10 | Unsigned32 | accessible-for-notify | current |
| jnxDfcFlowLowWatermark OBJECT-TYPE Recommended lowest value for number of flows allowed in the system. | 1.3.6.1.4.1.2636.3.33.3.11 | Unsigned32 | accessible-for-notify | current |
| jnxDfcFlowHighWatermark OBJECT-TYPE Recommended highest value for number of flows allowed in the system. | 1.3.6.1.4.1.2636.3.33.3.12 | Unsigned32 | accessible-for-notify | current |
| jnxDfcCriteriaLowWatermark OBJECT-TYPE Recommended lowest value for number of criterias allowed in the system. | 1.3.6.1.4.1.2636.3.33.3.13 | Unsigned32 | accessible-for-notify | current |
| jnxDfcCriteriaHighWatermark OBJECT-TYPE Recommended highest value for number of criterias allowed in the system. | 1.3.6.1.4.1.2636.3.33.3.14 | Unsigned32 | accessible-for-notify | current |
| jnxDfcNotificationPrefix OBJECT-IDENTITY All DFC notifications are registered under this branch. | 1.3.6.1.4.1.2636.4.11.0 | current |
Notifications
| Name | OID | Status |
|---|---|---|
| jnxDfcSoftPpsThresholdExceeded NOTIFICATION-TYPE Notification of input packet rate (in packet per second) going beyond the configured limit. | 1.3.6.1.4.1.2636.4.11.0.1 | current |
| jnxDfcSoftPpsUnderThreshold NOTIFICATION-TYPE Notification of input packet rate (in packet per second) dropping back to below the configured limit. | 1.3.6.1.4.1.2636.4.11.0.2 | current |
| jnxDfcHardPpsThresholdExceeded NOTIFICATION-TYPE Notification of input packet rate (in packet per second) going beyond the recommended limit. | 1.3.6.1.4.1.2636.4.11.0.3 | current |
| jnxDfcHardPpsUnderThreshold NOTIFICATION-TYPE Notification of input packet rate (in packet per second) dropping back to below the recommended limit. | 1.3.6.1.4.1.2636.4.11.0.4 | current |
| jnxDfcSoftMemThresholdExceeded NOTIFICATION-TYPE Notification of memory overload condition i.e memory usage is going beyond the configured limit. | 1.3.6.1.4.1.2636.4.11.0.5 | current |
| jnxDfcSoftMemUnderThreshold NOTIFICATION-TYPE Notification of memory usage dropping back to below the configured limit. | 1.3.6.1.4.1.2636.4.11.0.6 | current |
| jnxDfcHardMemThresholdExceeded NOTIFICATION-TYPE Notification of memory overload condition i.e memory usage is going beyond the recommended limit. | 1.3.6.1.4.1.2636.4.11.0.7 | current |
| jnxDfcHardMemUnderThreshold NOTIFICATION-TYPE Notification of memory usage dropping back to below the recommended limit. | 1.3.6.1.4.1.2636.4.11.0.8 | current |