JUNIPER-BFD-MIB
- Registered at
- 1.3.6.1.4.1.2636.3.45.1
- Last updated
- 2006-10-12 12:00
- Organization
- IETF
- Revisions
- 2006-10-12 12:00
- Namespace
- juniper
- Source file
JUNIPER-BFD-MIB- Digest
sha256:16f0b0ddca6cd39c97116d98698c69891af1ed263780fb58889ddd65b668f044
Description
Provides BFD specific data.
Contact
Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net
Imports
| From | Symbols |
|---|---|
| BFD-STD-MIB | bfdSessIndex |
| JUNIPER-SMI | jnxBfdMibRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BFD-STD-MIB BFD-TC-STD-MIB DIFFSERV-DSCP-TC DIFFSERV-MIB IANA-BFD-TC-STD-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB INTEGRATED-SERVICES-MIB JUNIPER-BFD-MIB JUNIPER-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxBfdNotification OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.45.1.0 | |||
| jnxBfdObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.45.1.1 | |||
| jnxBfdSessTable OBJECT-TYPE Defines the jnxBfd Session Table for providing enterprise specific options to the corresponding bfdSessTable entry. | 1.3.6.1.4.1.2636.3.45.1.1.1 | not-accessible | current | |
| jnxBfdSessEntry OBJECT-TYPE Defines an entry in the jnxBfdSessTable. This essentially augments the bfdSessTable with additional objects. | 1.3.6.1.4.1.2636.3.45.1.1.1.1 | not-accessible | current | |
| jnxBfdSessThreshTxInterval OBJECT-TYPE The threshold value for transmit interval in microseconds. If the current transmit interval value adapts to a value greater than the threshold value, jnxBfdSessTxIntervalHigh trap is raised. | 1.3.6.1.4.1.2636.3.45.1.1.1.1.1 | Unsigned32 | read-only | current |
| jnxBfdSessCurrTxInterval OBJECT-TYPE The current transmit interval in microseconds. | 1.3.6.1.4.1.2636.3.45.1.1.1.1.2 | Unsigned32 | read-only | current |
| jnxBfdSessThreshDectTime OBJECT-TYPE The threshold value for detection time in microseconds. If the current detection time value is greater than the threshold value at the time when session state changes to up(1), jnxBfdSessDetectionTimeHigh trap is raised. | 1.3.6.1.4.1.2636.3.45.1.1.1.1.3 | Unsigned32 | read-only | current |
| jnxBfdSessCurrDectTime OBJECT-TYPE The actual value of detection time for the session. | 1.3.6.1.4.1.2636.3.45.1.1.1.1.4 | Unsigned32 | read-only | current |
| jnxBfdSessIntfName OBJECT-TYPE This object specifies the interface associated with the bfd session | 1.3.6.1.4.1.2636.3.45.1.1.1.1.5 | DisplayString | read-only | current |
| jnxBfdNotifyObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.45.1.2 | |||
| jnxBfdSessifName OBJECT-TYPE This object gives the Interface Name in the bfdSessUp and bfdSessDown trap. Even though this object doesnt appear in the OBJECTS list of these traps, but the agent relay this information as an extra parameter in the trap. | 1.3.6.1.4.1.2636.3.45.1.2.1 | DisplayString | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| jnxBfdSessTxIntervalHigh NOTIFICATION-TYPE This notification is generated when the threshold value for transmit interval (jnxBfdSessThreshTxInterval) is set and the bfd session transmit interval (jnxBfdSessCurrTxInterval) adapts to a value greater than the threshold value. This trap is sent only once, when we first exceed the threshold. The transmit interval can continue to adapt beyond the threshold value. Adaptation of transmit interval happens due to network issues causing the BFD session to go down on either the local system or the remote neighbor. | 1.3.6.1.4.1.2636.3.45.1.0.1 | current |
| jnxBfdSessDetectionTimeHigh NOTIFICATION-TYPE This notification is generated when the threshold value for detection time (jnxBfdSessThreshDectTime) is set and the bfd session detection-time (jnxBfdSessCurrDectTime) adapts to a value greater than the threshold value. This trap is sent only once, when we first exceed the threshold. The detection-time can continue to adapt beyond the threshold value. Adaptation of detection-time happens due to network issues causing the BFD session to go down on either the local system or the remote neighbor. | 1.3.6.1.4.1.2636.3.45.1.0.2 | current |