JUNIPER-ATM-MIB
- Registered at
- 1.3.6.1.4.1.2636.3.10
- Last updated
- 2003-12-04 00:00
- Organization
- Juniper Networks, Inc.
- Revisions
- 2004-01-06 00:00, 2003-12-04 00:00, 2003-09-17 00:00, 2002-07-04 00:00, 2002-01-23 00:00, 2001-07-08 00:00
- Namespace
- juniper
- Source file
JUNIPER-ATM-MIB- Digest
sha256:af0598c0bd3be549bc53f86b92700d5ff8727982727f4b0e5f8ebadd391c3f21
Description
The Juniper enterprise MIB for ATM interfaces and VCs
Contact
Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net
Imports
| From | Symbols |
|---|---|
| ATM-MIB | atmInterfaceConfEntry, atmVclEntry, atmVplEntry |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddressIPv4, InetAddressIPv6 |
| JUNIPER-SMI | jnxMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-MIB ATM-TC-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB JUNIPER-ATM-MIB JUNIPER-SMI SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| JnxAtmFlags TEXTUAL-CONVENTION Flags related to the VC or Trunk. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxAtmIfTable OBJECT-TYPE This table contains config and stats parameters, one entry per physical interface (ATM port). | 1.3.6.1.4.1.2636.3.10.1 | not-accessible | current | |
| jnxAtmIfEntry OBJECT-TYPE This entry contains additional ATM interface config and stats objects, not covered in standard mibs. Each entry is an extension of atmInterfaceConfEntry defined in ATM-MIB. | 1.3.6.1.4.1.2636.3.10.1.1 | not-accessible | current | |
| jnxAtmIfPortType OBJECT-TYPE The physical port type. | 1.3.6.1.4.1.2636.3.10.1.1.1 | INTEGER {other(1), oc3(2), oc12(3), t3(4), e3(5), oc48(6)} | read-only | current |
| jnxAtmIfEncaps OBJECT-TYPE ATM physical link layer encapsulation. | 1.3.6.1.4.1.2636.3.10.1.1.2 | INTEGER {other(1), atmPvc(2), atmCccCellRelay(3)} | read-only | current |
| jnxAtmIfLpBackInfo OBJECT-TYPE Loop back config and type. | 1.3.6.1.4.1.2636.3.10.1.1.3 | INTEGER {noLoopBack(1), localLoopBack(2), remoteLoopBack(3)} | read-only | current |
| jnxAtmIfScrambleEnable OBJECT-TYPE Shows whether scrambling is enabled or disabled | 1.3.6.1.4.1.2636.3.10.1.1.4 | INTEGER {enabled(1), disabled(2)} | read-only | current |
| jnxAtmIfTxCellCount OBJECT-TYPE The number of ATM cells transmitted by the interface. Includes Idle cells transmitted. | 1.3.6.1.4.1.2636.3.10.1.1.5 | Counter64 | read-only | current |
| jnxAtmIfRxCellCount OBJECT-TYPE The number of ATM cells received by the interface. Excludes Idle cells received. | 1.3.6.1.4.1.2636.3.10.1.1.6 | Counter64 | read-only | current |
| jnxAtmIfTxIdleCellCount OBJECT-TYPE The number of idle cells sent by the port. When the ATM interface has nothing to send, it sends idle cells to fill the time slot. | 1.3.6.1.4.1.2636.3.10.1.1.7 | Counter64 | read-only | current |
| jnxAtmIfUncorrHCSErrs OBJECT-TYPE The number of uncorrectable cell Header Check Sequence (HCS) Errors that occurred. | 1.3.6.1.4.1.2636.3.10.1.1.8 | Counter64 | read-only | current |
| jnxAtmIfCorrHCSErrs OBJECT-TYPE The number of correctable cell Header Check Sequence (HCS) Errors that occurred. | 1.3.6.1.4.1.2636.3.10.1.1.9 | Counter64 | read-only | current |
| jnxAtmIfTxCellFIFOOverRuns OBJECT-TYPE The number of overruns in the Transmit FIFO. | 1.3.6.1.4.1.2636.3.10.1.1.10 | Counter64 | read-only | current |
| jnxAtmIfRxCellFIFOOverRuns OBJECT-TYPE The number of overruns in the Receive FIFO. | 1.3.6.1.4.1.2636.3.10.1.1.11 | Counter64 | read-only | current |
| jnxAtmIfRxCellFIFOUnderRuns OBJECT-TYPE The number of underruns in the receive FIFO. | 1.3.6.1.4.1.2636.3.10.1.1.12 | Counter64 | read-only | current |
| jnxAtmIfInInvalidVCCells OBJECT-TYPE The number of Cells that arrived for non existent VC. | 1.3.6.1.4.1.2636.3.10.1.1.13 | Counter64 | read-only | current |
| jnxAtmIfInNoBufferOAMCells OBJECT-TYPE The number of received OAM cells or raw cells dropped because no buffers were available to handle them. | 1.3.6.1.4.1.2636.3.10.1.1.14 | Counter64 | read-only | current |
| jnxAtmIfInNoBufDropPkts OBJECT-TYPE The number of AAL5 packets dropped because there was no enough buffer to handle them. | 1.3.6.1.4.1.2636.3.10.1.1.15 | Counter64 | read-only | current |
| jnxAtmIfOutVCQueueDrops OBJECT-TYPE The number of packets dropped because of queue limits on each VC. | 1.3.6.1.4.1.2636.3.10.1.1.16 | Counter64 | read-only | current |
| jnxAtmIfInBadCrcs OBJECT-TYPE The total number of incoming CRC errors. | 1.3.6.1.4.1.2636.3.10.1.1.17 | Counter64 | read-only | current |
| jnxAtmIfInLenErrPkts OBJECT-TYPE The number of AAL5 packets dropped because their length was incorrect. | 1.3.6.1.4.1.2636.3.10.1.1.18 | Counter64 | read-only | current |
| jnxAtmIfInTimeoutPkts OBJECT-TYPE The number of AAL5 packets dropped because of reassembly timeout. | 1.3.6.1.4.1.2636.3.10.1.1.19 | Counter64 | read-only | current |
| jnxAtmIfL2CircuitMode OBJECT-TYPE The layer 2 circuit mode of this Atm interface. Note, this applies only to interfaces on AtmII pics. | 1.3.6.1.4.1.2636.3.10.1.1.20 | INTEGER {notApplicable(1), none(2), aal5(3), cell(4), uniTrunk(5), nniTrunk(6)} | read-only | current |
| jnxAtmVCTable OBJECT-TYPE A table of all p2p/p2mp/multicast VC entries. | 1.3.6.1.4.1.2636.3.10.2 | not-accessible | current | |
| jnxAtmVCEntry OBJECT-TYPE Special Cases: - No traffic Stats for multicast VCs. (0 by default). - Multipoint Destination IP Address for a p2p vc is invalid (0.0.0.0 by default). - When the encapsulation type for the logical interface (to which VC belongs) is 'atmCccCellRelay', only Generic VC Info is valid. - If OAM is disabled (indicated in jnxAtmVCFlags), then all the OAM config & F5 stats info is invalid. (zeroed by default). | 1.3.6.1.4.1.2636.3.10.2.1 | not-accessible | current | |
| jnxAtmVCConnType OBJECT-TYPE The type of connection. The type 'other' means vc type is unknown or is not one of the other types. | 1.3.6.1.4.1.2636.3.10.2.1.1 | INTEGER {other(1), p2p(2), p2mp(3), multicast(4)} | read-only | current |
| jnxAtmVCEncapsulation OBJECT-TYPE The atm encapsulation type associated with the VC. atmCccCellRelay : ATM Cell Relay for CCC atmCccVcMux : ATM VC for CCC atmCiscoNlpid : Cisco-compatible ATM NLPID encapsulation atmNlpid : ATM NLPID encapsulation atmSnap : ATM LLC/SNAP encapsulation atmVcMux : ATM VC multiplexing atmTccVcMux : TCC (Translational Cross Connection) over ATM VC MUX encapsulation atmTccSnap : TCC (Translational Cross Connection) over ATM LLC/SNAP encapsulation | 1.3.6.1.4.1.2636.3.10.2.1.2 | INTEGER {other(1), atmCccCellRelay(2), atmCccVcMux(3), atmCiscoNlpid(4), atmNlpid(5), atmSnap(6), atmVcMux(7), atmTccVcMux(8), atmTccSnap(9)} | read-only | current |
| jnxAtmVCMpDestIPv4Addr OBJECT-TYPE This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint destination IPv4 address. When the VC connection type is other than p2mp OR when the multipoint destination address type is of IPv6, this object returns 0.0.0.0 by default. | 1.3.6.1.4.1.2636.3.10.2.1.3 | InetAddressIPv4 | read-only | current |
| jnxAtmVCMpDestIPv6Addr OBJECT-TYPE This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint destination IPv6 address. When the VC connection type is other than p2mp OR when the multipoint destination address type is of IPv4, this object returns all the bytes of addr filled with 0. | 1.3.6.1.4.1.2636.3.10.2.1.4 | InetAddressIPv6 | read-only | current |
| jnxAtmVCFlags OBJECT-TYPE Flags related to the VC. | 1.3.6.1.4.1.2636.3.10.2.1.5 | JnxAtmFlags | read-only | current |
| jnxAtmVCTotalDownTime OBJECT-TYPE The total VC down time in seconds ever since the system rebooted. | 1.3.6.1.4.1.2636.3.10.2.1.6 | Integer32 | read-only | current |
| jnxAtmVCInBytes OBJECT-TYPE The number of bytes received on the VC. | 1.3.6.1.4.1.2636.3.10.2.1.7 | Counter64 | read-only | current |
| jnxAtmVCOutBytes OBJECT-TYPE The number of bytes sent out on the VC. | 1.3.6.1.4.1.2636.3.10.2.1.8 | Counter64 | read-only | current |
| jnxAtmVCInPkts OBJECT-TYPE The number of packets received on the VC. | 1.3.6.1.4.1.2636.3.10.2.1.9 | Counter64 | read-only | current |
| jnxAtmVCOutPkts OBJECT-TYPE The number of packets sent out on the VC. | 1.3.6.1.4.1.2636.3.10.2.1.10 | Counter64 | read-only | current |
| jnxAtmVCTailQueuePktDrops OBJECT-TYPE The number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than allowed. | 1.3.6.1.4.1.2636.3.10.2.1.11 | Counter64 | read-only | current |
| jnxAtmVCOAMPeriod OBJECT-TYPE This time interval indicates how often the F5 cells are sent to know the status of the VC. | 1.3.6.1.4.1.2636.3.10.2.1.12 | Integer32 | read-only | current |
| jnxAtmVCOAMUpCellCount OBJECT-TYPE The minimum number of loopback cells to be received to declare that the VC is up. | 1.3.6.1.4.1.2636.3.10.2.1.13 | Integer32 | read-only | current |
| jnxAtmVCOAMDownCellCount OBJECT-TYPE The minimum number of loopback cells to be received to declare that the VC is down. This object would have zero value if OAM is not enabled. (indicated in jnxAtmVCFlags) | 1.3.6.1.4.1.2636.3.10.2.1.14 | Integer32 | read-only | current |
| jnxAtmVCInOAMF5LoopCells OBJECT-TYPE The number of OAM F5 loopback cells received. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | 1.3.6.1.4.1.2636.3.10.2.1.15 | Counter32 | read-only | current |
| jnxAtmVCOutOAMF5LoopCells OBJECT-TYPE The number of OAM F5 loopback cells sent. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | 1.3.6.1.4.1.2636.3.10.2.1.16 | Counter32 | read-only | current |
| jnxAtmVCInOAMF5RDICells OBJECT-TYPE The number of OAM F5 cells received, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | 1.3.6.1.4.1.2636.3.10.2.1.17 | Counter32 | read-only | current |
| jnxAtmVCOutOAMF5RDICells OBJECT-TYPE The number of OAM F5 cells transmitted, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | 1.3.6.1.4.1.2636.3.10.2.1.18 | Counter32 | read-only | current |
| jnxAtmVCInOAMF5AISCells OBJECT-TYPE The number of OAM F5 cells received, with AIS(Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | 1.3.6.1.4.1.2636.3.10.2.1.19 | Counter32 | read-only | current |
| jnxAtmVCOutOAMF5AISCells OBJECT-TYPE The number of OAM F5 cells transmitted, with AIS (Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled. | 1.3.6.1.4.1.2636.3.10.2.1.20 | Counter32 | read-only | current |
| jnxAtmVpTable OBJECT-TYPE The table of ATM VPs. This table augments atmVplTable defined in standard ATM mib. | 1.3.6.1.4.1.2636.3.10.3 | not-accessible | current | |
| jnxAtmVpEntry OBJECT-TYPE Each entry represents config, status and statistics info related to an ATM VP configured. This entry augments the atmVplEntry defined in standard ATM mib (RFC 2515). So ifIndex and VPI are the indices to this table. Caveats: - Traffic stats are available per VP tunnel, only if shaping is configured on the VP. Object 'jnxAtmVpFlags' can be used to determine if shaping is enabled. - When no OAM is configured, OAM config and OAM stat objects' values are invalid (zero by default). Object 'jnxAtmVpFlags' contains info on whether OAM is configured or not. - For atm-1 VPs, the only valid object is jnxAtmVpFlags. | 1.3.6.1.4.1.2636.3.10.3.1 | not-accessible | current | |
| jnxAtmVpFlags OBJECT-TYPE The flags associated with this VP. | 1.3.6.1.4.1.2636.3.10.3.1.1 | Bits {active(0), down(1), oamEnabled(2), shapingEnabled(3), passiveOam(4)} | read-only | current |
| jnxAtmVpTotalDownTime OBJECT-TYPE The total VP downtime in seconds, ever since the system rebooted. | 1.3.6.1.4.1.2636.3.10.3.1.2 | Integer32 | read-only | current |
| jnxAtmVpOamPeriod OBJECT-TYPE This time interval indicates how often the OAM F4 cells are sent to determine the status of the VP. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled. | 1.3.6.1.4.1.2636.3.10.3.1.3 | Integer32 | read-only | current |
| jnxAtmVpOamUpCellCount OBJECT-TYPE The minimum number of consecutive loopback cells to be received to declare that the VP is up. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled. | 1.3.6.1.4.1.2636.3.10.3.1.4 | Integer32 | read-only | current |
| jnxAtmVpOamDownCellCount OBJECT-TYPE The minimum number of consecutive loopback cells to be received to declare that the VP is down. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled. | 1.3.6.1.4.1.2636.3.10.3.1.5 | Integer32 | read-only | current |
| jnxAtmVpInBytes OBJECT-TYPE The number of bytes received on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.6 | Counter64 | read-only | current |
| jnxAtmVpOutBytes OBJECT-TYPE The number of bytes sent out on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.7 | Counter64 | read-only | current |
| jnxAtmVpInPkts OBJECT-TYPE The number of packets received on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.8 | Counter64 | read-only | current |
| jnxAtmVpOutPkts OBJECT-TYPE The number of packets sent out on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.9 | Counter64 | read-only | current |
| jnxAtmVpInOamF4Cells OBJECT-TYPE The number of OAM F4 cells received on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.10 | Counter32 | read-only | current |
| jnxAtmVpOutOamF4Cells OBJECT-TYPE The number of OAM F4 cells transmitted on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.11 | Counter32 | read-only | current |
| jnxAtmVpInOamF4LoopCells OBJECT-TYPE The number of OAM F4 loopback cells received on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.12 | Counter32 | read-only | current |
| jnxAtmVpOutOamF4LoopCells OBJECT-TYPE The number of OAM F4 cells transmitted on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.13 | Counter32 | read-only | current |
| jnxAtmVpInOamF4RdiCells OBJECT-TYPE The number of OAM F4 RDI cells received on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.14 | Counter32 | read-only | current |
| jnxAtmVpOutOamF4RdiCells OBJECT-TYPE The number of OAM F4 RDI cells transmitted on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.15 | Counter32 | read-only | current |
| jnxAtmVpInOamF4AisCells OBJECT-TYPE The number of OAM F4 AIS cells received on the VP. | 1.3.6.1.4.1.2636.3.10.3.1.16 | Counter32 | read-only | current |
| jnxAtmTrunkTable OBJECT-TYPE A table of all ATM Trunk entries. | 1.3.6.1.4.1.2636.3.10.4 | not-accessible | current | |
| jnxAtmTrunkEntry OBJECT-TYPE Special Cases: - When the encapsulation type for the logical interface (to which Trunk belongs) is 'atmCccCellRelay', only Generic Trunk Info is valid. | 1.3.6.1.4.1.2636.3.10.4.1 | not-accessible | current | |
| jnxAtmTrunkId OBJECT-TYPE The identifier for this ATM Trunk. | 1.3.6.1.4.1.2636.3.10.4.1.1 | Integer32 | read-only | current |
| jnxAtmTrunkConnType OBJECT-TYPE The type of connection. The type 'other' means trunk type is unknown or is not one of the other types. | 1.3.6.1.4.1.2636.3.10.4.1.2 | INTEGER {other(1), p2p(2)} | read-only | current |
| jnxAtmTrunkEncapsulation OBJECT-TYPE The atm encapsulation type associated with the VC or Trunk. atmCccCellRelay : ATM Cell Relay for CCC | 1.3.6.1.4.1.2636.3.10.4.1.3 | INTEGER {other(1), atmCccCellRelay(2)} | read-only | current |
| jnxAtmTrunkFlags OBJECT-TYPE Flags related to the Trunk. | 1.3.6.1.4.1.2636.3.10.4.1.4 | JnxAtmFlags | read-only | current |
| jnxAtmTrunkTotalDownTime OBJECT-TYPE The total Trunk down time in seconds ever since the system rebooted. | 1.3.6.1.4.1.2636.3.10.4.1.5 | Integer32 | read-only | current |
| jnxAtmTrunkInBytes OBJECT-TYPE The number of bytes received on the Trunk. | 1.3.6.1.4.1.2636.3.10.4.1.6 | Counter64 | read-only | current |
| jnxAtmTrunkOutBytes OBJECT-TYPE The number of bytes sent out on the Trunk. | 1.3.6.1.4.1.2636.3.10.4.1.7 | Counter64 | read-only | current |
| jnxAtmTrunkInPkts OBJECT-TYPE The number of packets received on the Trunk. | 1.3.6.1.4.1.2636.3.10.4.1.8 | Counter64 | read-only | current |
| jnxAtmTrunkOutPkts OBJECT-TYPE The number of packets sent out on the Trunk. | 1.3.6.1.4.1.2636.3.10.4.1.9 | Counter64 | read-only | current |
| jnxAtmTrunkTailQueuePktDrops OBJECT-TYPE The number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than allowed. | 1.3.6.1.4.1.2636.3.10.4.1.10 | Counter64 | read-only | current |
| jnxAtmTrunkInOAMF4AISCells OBJECT-TYPE The number of OAM F4 cells received, with AIS(Alarm Indication Signal) bit set. | 1.3.6.1.4.1.2636.3.10.4.1.15 | Counter32 | read-only | current |
| jnxAtmTrunkOutOAMF4AISCells OBJECT-TYPE The number of OAM F4 cells sent, with AIS(Alarm Indication Signal) bit set. | 1.3.6.1.4.1.2636.3.10.4.1.16 | Counter32 | read-only | current |