JUNIPER-ALARM-MIB
- Registered at
- 1.3.6.1.4.1.2636.3.4
- Last updated
- 2003-07-18 21:53
- Organization
- Juniper Networks, Inc.
- Namespace
- juniper
- Source file
JUNIPER-ALARM-MIB- Digest
sha256:e5064e7d5d87522393e04cca95511f287a88b838c4ff7d1d5b86159597e30c13
Description
This is Juniper Networks' implementation of enterprise specific MIB for alarms from the router chassis box.
Contact
Juniper Technical Assistance Center Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 E-mail: support@juniper.net
Imports
| From | Symbols |
|---|---|
| JUNIPER-SMI | jnxMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TimeStamp |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
JUNIPER-ALARM-MIB JUNIPER-SMI SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxCraftAlarms OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.4.2 | |||
| jnxAlarmRelayMode OBJECT-TYPE The alarm relay mode of the craft interface panel for both yellow and red alarms. Both yellow and red alarms could be cut off by a front panel Alarm Cutoff / Lamp Test (ACO/LT) button. In the pass-on mode, the alarm relay will be activated to pass on the yellow or red alarms. In the cut-off mode, both yellow and red alarms will be cut off from the alarm relays which are normally connected to audible sirens or visual flashing devices. | 1.3.6.1.4.1.2636.3.4.2.1 | INTEGER {other(1), passOn(2), cutOff(3)} | read-only | current |
| jnxYellowAlarms OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.4.2.2 | |||
| jnxYellowAlarmState OBJECT-TYPE The yellow alarm state on the craft interface panel. The yellow alarm is on when there is some system warning such as maintenance alert or significant temperature increase. This yellow alarm state could be turned off by the ACO/LT (Alarm Cut Off / Lamp Test) button on the front panel module. | 1.3.6.1.4.1.2636.3.4.2.2.1 | INTEGER {other(1), off(2), on(3)} | read-only | current |
| jnxYellowAlarmCount OBJECT-TYPE The number of currently active and non-silent yellow alarms. This object is independent of the ACO/LT (Alarm Cut Off / Lamp Test) button. | 1.3.6.1.4.1.2636.3.4.2.2.2 | Gauge32 | read-only | current |
| jnxYellowAlarmLastChange OBJECT-TYPE The value of sysUpTime when the yellow alarm last changed - either from off to on or vice versa. Zero if unknown or never changed since the agent was up. | 1.3.6.1.4.1.2636.3.4.2.2.3 | TimeStamp | read-only | current |
| jnxRedAlarms OBJECT-IDENTITY | 1.3.6.1.4.1.2636.3.4.2.3 | |||
| jnxRedAlarmState OBJECT-TYPE The red alarm indication on the craft interface panel. The red alarm is on when there is some system failure or power supply failure or the system is experiencing a hardware malfunction or some threshold is being exceeded. This red alarm state could be turned off by the ACO/LT (Alarm Cut Off / Lamp Test) button on the front panel module. | 1.3.6.1.4.1.2636.3.4.2.3.1 | INTEGER {other(1), off(2), on(3)} | read-only | current |
| jnxRedAlarmCount OBJECT-TYPE The number of currently active and non-silent red alarms. This object is independent of the ACO/LT (Alarm Cut Off / Lamp Test) button. | 1.3.6.1.4.1.2636.3.4.2.3.2 | Gauge32 | read-only | current |
| jnxRedAlarmLastChange OBJECT-TYPE The value of sysUpTime when the red alarm last changed - either from off to on or vice versa. Zero if unknown or never changed since the agent was up. | 1.3.6.1.4.1.2636.3.4.2.3.3 | TimeStamp | read-only | current |