MIBs Depot

JDSU-ONMSI-MIB

Registered at
1.3.6.1.4.1.35873.5.1.1.1
Last updated
2020-03-11 16:27
Organization
JDSU
Revisions
2020-03-11 16:27, 2019-11-20 16:01, 2018-09-04 15:59, 2017-07-05 11:00, 2012-10-25 11:38, 2011-10-04 11:15, 2011-09-27 14:49, 2010-06-09 09:10
Namespace
jds
Source file
JDSU-ONMSI-MIB
Digest
sha256:26464fa34287aede48e175eab6f07a5769da306ab299b853fa40d419bdb3dab3

Description

JDSU FO Division MIB root

Contact

JDS Uniphase France Postal: JDSU france 34 rue Necker 42 000 SAINT-ETIENNE France Tel: +(33) 47747 8900 Fax: +(33) 47747 8970

Imports

FromSymbols
IANA-ITU-ALARM-TC-MIBIANAItuEventType, IANAItuProbableCause
JDSU-SMI-MIBjdsuOnmsi
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANA-ITU-ALARM-TC-MIB
JDSU-ONMSI-MIB
JDSU-SMI-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JdsuOnmsiAlarmAckStatus
TEXTUAL-CONVENTION
Enumeration to alarm acknowledgement status
current
JdsuOnmsiAlarmClearStatus
TEXTUAL-CONVENTION
Enumeration to alarm clear status
current
JdsuOnmsiAlarmEventType
TEXTUAL-CONVENTION
Enumeration for alarm event types
current
JdsuOnmsiInternalKey
TEXTUAL-CONVENTION
Numeric object internal key
current
JdsuOnmsiOtdrPosition
TEXTUAL-CONVENTION
The position of an OTDR module in an OTU
current
JdsuOnmsiPeakStatus
TEXTUAL-CONVENTION
Peak status : - UNKNOWN : before test - OK : peak OK - WARNING_LEVEL : peak crosses warning threshold in level or position - MINOR_LEVEL : peak crosses minor threshold in level or position - NEW : peak was not referenced - MISSING referenced peak is missing
current
JdsuOnmsiPeakType
TEXTUAL-CONVENTION
Enumeration for peak types
current
JdsuOnmsiSeverity
TEXTUAL-CONVENTION
Perceived severity as defined in OSS/J
current
JdsuOnmsiUtf8String
TEXTUAL-CONVENTION
UTF-8 encoded strings. The UTF-8 charset is specified by RFC 2279; the transformation format upon which it is based is specified in Amendment 2 of ISO 10646-1 and is also described in the Unicode Standard
current

Objects

NameOIDSyntaxAccessStatus
jdsuOnmsiProduct
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.1
jdsuOnmsiProductDescr
OBJECT-TYPE
Textual description of the product. It is mandatory that this only contain printable ASCII characters
1.3.6.1.4.1.35873.5.1.1.1.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiProductObjectID
OBJECT-TYPE
Vendor's authoritative identification of the network management subsystem contained into the product. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed
1.3.6.1.4.1.35873.5.1.1.1.1.2OBJECT IDENTIFIERread-onlycurrent
jdsuOnmsiProductContact
OBJECT-TYPE
Textual identification of the person in charge of the managed node, together with information on how to contact this person
1.3.6.1.4.1.35873.5.1.1.1.1.3JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiProductName
OBJECT-TYPE
Administratively-assigned name for this managed product
1.3.6.1.4.1.35873.5.1.1.1.1.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiProductLocation
OBJECT-TYPE
Physical location of the product (e.g., `JDSU ONMS Server office, 3rd floor...')
1.3.6.1.4.1.35873.5.1.1.1.1.5JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiAdministration
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.2
jdsuOnmsiSnmpConfig
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.2.1
jdsuOnmsiSnmpConfigurationReload
OBJECT-TYPE
Set 1 to reload the SNMP configuration. (from jdmk.acl and snmp.properties files)
1.3.6.1.4.1.35873.5.1.1.1.2.1.1INTEGERread-writecurrent
jdsuOnmsiImAlive
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.2.2
jdsuOnmsiImAlivePeriodMin
OBJECT-TYPE
The periodicity of jdsuOnmsiImAliveTrap, in minutes. Setting 0 will disable the traps.
1.3.6.1.4.1.35873.5.1.1.1.2.2.1INTEGERread-writecurrent
jdsuOnmsiImAliveText
OBJECT-TYPE
The text carried by the jdsuOnmsiImAliveTrap
1.3.6.1.4.1.35873.5.1.1.1.2.2.2DisplayStringread-writecurrent
jdsuOnmsiImAliveAlarmEventSequence
OBJECT-TYPE
The sequence of the jdsuOnmsiAlarmEventTrap. Managers can rely on it to detect missed jdsuOnmsiAlarmEventTrap. Use jdsuOnmsiAlarmResendEvents to resend missed traps.
1.3.6.1.4.1.35873.5.1.1.1.2.2.3Unsigned32read-onlycurrent
jdsuOnmsiServices
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3
jdsuOnmsiHomeService
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.1
jdsuOnmsiHomeData
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.1.1
jdsuOnmsiHomeTable
OBJECT-TYPE
This table contains the standard home data
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1not-accessiblecurrent
jdsuOnmsiHomeEntry
OBJECT-TYPE
A home
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1not-accessiblecurrent
jdsuOnmsiHomeEntryInternalKey
OBJECT-TYPE
The nternal key of the home
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiHomeEntryHomeIdentifier
OBJECT-TYPE
The identifier of the home
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeEntryName
OBJECT-TYPE
The name of the home
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeEntryDescription
OBJECT-TYPE
The description of the home
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeEntryPonInternalKey
OBJECT-TYPE
The internal key of the home's PON
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.5JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiHomeEntryHomeTerminationTypeInternalKey
OBJECT-TYPE
The internal key of the home's termination type
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.6JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiHomeEntryLatestPeakInternalKey
OBJECT-TYPE
The internal key of the home's latest peak
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.7JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiHomeEntryLatestPeakSeverity
OBJECT-TYPE
The severity of the home's latest peak
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.8JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiHomeEntryLatestPeakStatus
OBJECT-TYPE
The status of the home's latest peak
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.9JdsuOnmsiPeakStatusread-onlycurrent
jdsuOnmsiHomeEntryVip
OBJECT-TYPE
The VIP status of the home
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.1.1.10TruthValueread-onlycurrent
jdsuOnmsiHomeAdditionalAttributeTable
OBJECT-TYPE
This table contains the additional attributes on homes
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.2not-accessiblecurrent
jdsuOnmsiHomeAdditionalAttributeEntry
OBJECT-TYPE
A additional attribute on a home
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.2.1not-accessiblecurrent
jdsuOnmsiHomeAdditionalAttributeEntryInternalKey
OBJECT-TYPE
The internal key of the home
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.2.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiHomeAdditionalAttributeEntryName
OBJECT-TYPE
The additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.2.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeAdditionalAttributeEntryValue
OBJECT-TYPE
The additional attribute value
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeTerminationTypeTable
OBJECT-TYPE
This table contains the standard home termination type data
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.3not-accessiblecurrent
jdsuOnmsiHomeTerminationTypeEntry
OBJECT-TYPE
A home termination type
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.3.1not-accessiblecurrent
jdsuOnmsiHomeTerminationTypeEntryInternalKey
OBJECT-TYPE
The internal key of the home termination type
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.3.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiHomeTerminationTypeEntryName
OBJECT-TYPE
The name of the home termination type
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.3.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeTerminationTypeEntryDescription
OBJECT-TYPE
The description of the home termination type
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.3.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeAttributeTable
OBJECT-TYPE
This table contains the descriptions of noticeable home attributes
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.4not-accessiblecurrent
jdsuOnmsiHomeAttributeEntry
OBJECT-TYPE
A home attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.4.1not-accessiblecurrent
jdsuOnmsiHomeAttributeEntryName
OBJECT-TYPE
The attribute name. The additional attributes are prefixed with an underscore character to avoid name collision with standard attributes
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.4.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeAttributeEntryAdditional
OBJECT-TYPE
This flag indicates whether the attribute is additional
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.4.1.2TruthValueread-onlycurrent
jdsuOnmsiHomeAttributeEntryFindable
OBJECT-TYPE
This flag indicates whether the attribute is findable
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.4.1.3TruthValueread-onlycurrent
jdsuOnmsiHomeAttributeEntryUpdatable
OBJECT-TYPE
This flag indicates whether the attribute is updatable
1.3.6.1.4.1.35873.5.1.1.1.3.1.1.4.1.4TruthValueread-onlycurrent
jdsuOnmsiHomeFunctions
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.1.2
jdsuOnmsiHomeTerminationTypeLoad
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.1
jdsuOnmsiHomeTerminationTypeLoadExecute
OBJECT-TYPE
Setting this field to 1 performs the jdsuOnmsiHomeTerminationTypeTable load
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.1.1INTEGERread-writecurrent
jdsuOnmsiHomeTerminationTypeLoadError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeGet
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.2
jdsuOnmsiHomeGetParamInternalKey
OBJECT-TYPE
The internal key of the home to retrieve
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.2.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiHomeGetExecute
OBJECT-TYPE
Setting this field to 1 performs the home retrieval
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.2.2INTEGERread-writecurrent
jdsuOnmsiHomeGetError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.2.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeFind
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.3
jdsuOnmsiHomeFindParamAttribute
OBJECT-TYPE
The attribute of the home to perform the search on. Valid attributes for homes are : - name - identifier - ponInternalKey and any additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.3.1JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiHomeFindParamValue
OBJECT-TYPE
The attribute value to find
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.3.2JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiHomeFindExecute
OBJECT-TYPE
Setting this field to 1 performs the home find
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.3.3INTEGERread-writecurrent
jdsuOnmsiHomeFindError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.3.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeStartTest
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.4
jdsuOnmsiHomeStartTestParamInternalKey
OBJECT-TYPE
The internal key of the home to start
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.4.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiHomeStartTestExecute
OBJECT-TYPE
Setting this field to 1 performs the home test start
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.4.2INTEGERread-writecurrent
jdsuOnmsiHomeStartTestError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.4.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiHomeAttributeLoad
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.5
jdsuOnmsiHomeAttributeLoadExecute
OBJECT-TYPE
Setting this field to 1 performs the jdsuOnmsiHomeAttributeTable load
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.5.1INTEGERread-writecurrent
jdsuOnmsiHomeAttributeLoadError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.1.2.5.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonService
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.2
jdsuOnmsiPonData
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.2.1
jdsuOnmsiPonTable
OBJECT-TYPE
This table contains the standard PON data
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1not-accessiblecurrent
jdsuOnmsiPonEntry
OBJECT-TYPE
A PON entry
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1not-accessiblecurrent
jdsuOnmsiPonEntryInternalKey
OBJECT-TYPE
The internal key of the PON
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPonEntryName
OBJECT-TYPE
The name of the PON
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonEntryDescription
OBJECT-TYPE
The description of the PON
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonEntryLatestTestInternalKey
OBJECT-TYPE
The internal key of the PON's latest test
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1.4JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPonEntryOtuInternalKey
OBJECT-TYPE
The internal key of the OTU to which the PON belongs
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1.5JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPonEntryPortInternalKey
OBJECT-TYPE
The internal key of the OTU port associated to the PON
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1.6JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPonEntrySeverity
OBJECT-TYPE
The current severity of the PON
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1.7JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiPonEntrySchedulingConfiguration
OBJECT-TYPE
he scheduling configuration of the PON test in a serialized form (key1=value1|key2=value2|...). It contains the following keys: - scheduled: this flag indicates whether the PON test is periodic or not (true/false) - periodical: this flag indicates whether the PON test is scheduled or not (true/false) - startDate: the date at which the PON test scheduling starts, in seconds since January 1, 1970, 00:00:00 GMT - frequencyMin: the period of the PON test scheduling (if the test is periodic), in minutes
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.1.1.8JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonAdditionalAttributeTable
OBJECT-TYPE
This table contains the additional attributes on PONs
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.2not-accessiblecurrent
jdsuOnmsiPonAdditionalAttributeEntry
OBJECT-TYPE
A PON additional attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.2.1not-accessiblecurrent
jdsuOnmsiPonAdditionalAttributeEntryInternalKey
OBJECT-TYPE
The internal key of the PON
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.2.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPonAdditionalAttributeEntryName
OBJECT-TYPE
The additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.2.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonAdditionalAttributeEntryValue
OBJECT-TYPE
The additional attribute value
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonAttributeTable
OBJECT-TYPE
This table contains the descriptions of noticeable PON attributes
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.3not-accessiblecurrent
jdsuOnmsiPonAttributeEntry
OBJECT-TYPE
A PON attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.3.1not-accessiblecurrent
jdsuOnmsiPonAttributeEntryName
OBJECT-TYPE
The attribute name. The additional attributes are prefixed with an underscore character to avoid name collision with standard attributes
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.3.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonAttributeEntryAdditional
OBJECT-TYPE
This flag indicates whether the attribute is additional
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.3.1.2TruthValueread-onlycurrent
jdsuOnmsiPonAttributeEntryFindable
OBJECT-TYPE
This flag indicates whether the attribute is findable
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.3.1.3TruthValueread-onlycurrent
jdsuOnmsiPonAttributeEntryUpdatable
OBJECT-TYPE
This flag indicates whether the attribute is updatable
1.3.6.1.4.1.35873.5.1.1.1.3.2.1.3.1.4TruthValueread-onlycurrent
jdsuOnmsiPonFunctions
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.2.2
jdsuOnmsiPonGet
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.1
jdsuOnmsiPonGetParamInternalKey
OBJECT-TYPE
The internal key of the PON to retrieve
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.1.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiPonGetExecute
OBJECT-TYPE
Setting this field to 1 performs the PON retrieval
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.1.2INTEGERread-writecurrent
jdsuOnmsiPonGetError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonFind
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.2
jdsuOnmsiPonFindParamAttribute
OBJECT-TYPE
The attribute of the PON to perform the search on. Valid attributes for PONs are : - name and any additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.2.1JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiPonFindParamValue
OBJECT-TYPE
The attribute value to find
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.2.2JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiPonFindExecute
OBJECT-TYPE
Setting this field to 1 performs the PON find
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.2.3INTEGERread-writecurrent
jdsuOnmsiPonFindError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.2.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonStartTest
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.3
jdsuOnmsiPonStartTestParamInternalKey
OBJECT-TYPE
The internal key of the PON to start
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.3.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiPonStartTestExecute
OBJECT-TYPE
Setting this field to 1 performs the PON test start
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.3.2INTEGERread-writecurrent
jdsuOnmsiPonStartTestError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.3.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPonAttributeLoad
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.4
jdsuOnmsiPonAttributeLoadExecute
OBJECT-TYPE
Setting this field to 1 performs the jdsuOnmsiPonAttributeTable load
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.4.1INTEGERread-writecurrent
jdsuOnmsiPonAttributeLoadError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.2.2.4.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPeakService
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.3
jdsuOnmsiPeakData
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.3.1
jdsuOnmsiPeakTable
OBJECT-TYPE
The table of peaks
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1not-accessiblecurrent
jdsuOnmsiPeakEntry
OBJECT-TYPE
A peak entry
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1not-accessiblecurrent
jdsuOnmsiPeakEntryInternalKey
OBJECT-TYPE
The internal key of the peak
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPeakEntryTestInternalKey
OBJECT-TYPE
The internal key of the peak test
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.2JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPeakEntryDate
OBJECT-TYPE
The date of the peak
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.3DateAndTimeread-onlycurrent
jdsuOnmsiPeakEntryIsAReference
OBJECT-TYPE
Whether the peak is a reference
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.4TruthValueread-onlycurrent
jdsuOnmsiPeakEntryDistance
OBJECT-TYPE
The distance of the peak Unit : millimeters
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.5INTEGERread-onlycurrent
jdsuOnmsiPeakEntryLevel
OBJECT-TYPE
The level of the peak Unit : dB / 100
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.6INTEGERread-onlycurrent
jdsuOnmsiPeakEntryPower
OBJECT-TYPE
The power of the peak Unit : dBm / 100
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.7INTEGERread-onlycurrent
jdsuOnmsiPeakEntryIsPowerMeasured
OBJECT-TYPE
Whether the power has been measured
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.8TruthValueread-onlycurrent
jdsuOnmsiPeakEntrySeverity
OBJECT-TYPE
The severity of the peak
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.9JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiPeakEntryStatus
OBJECT-TYPE
The status of the peak
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.10JdsuOnmsiPeakStatusread-onlycurrent
jdsuOnmsiPeakEntryRefDistance
OBJECT-TYPE
The distance of the reference peak Unit : millimeters
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.11INTEGERread-onlycurrent
jdsuOnmsiPeakEntryRefLevel
OBJECT-TYPE
The level of the reference peak Unit : dB / 100
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.12INTEGERread-onlycurrent
jdsuOnmsiPeakEntryRefPower
OBJECT-TYPE
The power of the reference peak Unit : dBm / 100
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.13INTEGERread-onlycurrent
jdsuOnmsiPeakEntryRefIsPowerMeasured
OBJECT-TYPE
Whether the power of the reference peak has been measured
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.14TruthValueread-onlycurrent
jdsuOnmsiPeakEntryRefDate
OBJECT-TYPE
The date of the reference peak
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.15DateAndTimeread-onlycurrent
jdsuOnmsiPeakEntryType
OBJECT-TYPE
The type of the peak
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.16JdsuOnmsiPeakTyperead-onlycurrent
jdsuOnmsiPeakEntryHomeTerminationTypeInternalKey
OBJECT-TYPE
The internal key of the peak home termination type
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.17JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPeakEntryHomeInternalKey
OBJECT-TYPE
The internal key of the peak home
1.3.6.1.4.1.35873.5.1.1.1.3.3.1.1.1.18JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiPeakFunctions
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.3.2
jdsuOnmsiPeakGet
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.1
jdsuOnmsiPeakGetParamInternalKey
OBJECT-TYPE
The internal key of the peak to retrieve
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.1.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiPeakGetExecute
OBJECT-TYPE
Setting this field to 1 performs the peak retrieval
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.1.2INTEGERread-writecurrent
jdsuOnmsiPeakGetError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiPeakFind
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.2
jdsuOnmsiPeakFindParamAttribute
OBJECT-TYPE
The attribute of the peak to perform the search on. Valid attributes for peaks are : - testInternalKey
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.2.1JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiPeakFindParamValue
OBJECT-TYPE
The attribute value to find
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.2.2JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiPeakFindExecute
OBJECT-TYPE
Setting this field to 1 performs the peak find
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.2.3INTEGERread-writecurrent
jdsuOnmsiPeakFindError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.3.2.2.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkService
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.4
jdsuOnmsiLinkData
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.4.1
jdsuOnmsiLinkTable
OBJECT-TYPE
This table contains the standard link data
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.1not-accessiblecurrent
jdsuOnmsiLinkEntry
OBJECT-TYPE
A link entry
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.1.1not-accessiblecurrent
jdsuOnmsiLinkEntryInternalKey
OBJECT-TYPE
The internal key of the link
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.1.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiLinkEntryName
OBJECT-TYPE
The name of the link
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.1.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkEntryDescription
OBJECT-TYPE
The description of the link
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.1.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkEntryMeasureEnabled
OBJECT-TYPE
This flag indicates whether measurements can be performed on the link
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.1.1.4TruthValueread-writecurrent
jdsuOnmsiLinkEntryOtuInternalKey
OBJECT-TYPE
The internal key of the OTU to which the link belongs
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.1.1.5JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiLinkEntrySeverity
OBJECT-TYPE
The current severity of the link
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.1.1.6JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiLinkAdditionalAttributeTable
OBJECT-TYPE
This table contains the additional attributes on links
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.2not-accessiblecurrent
jdsuOnmsiLinkAdditionalAttributeEntry
OBJECT-TYPE
A link additional attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.2.1not-accessiblecurrent
jdsuOnmsiLinkAdditionalAttributeEntryInternalKey
OBJECT-TYPE
The internal key of the link
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.2.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiLinkAdditionalAttributeEntryName
OBJECT-TYPE
The additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.2.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkAdditionalAttributeEntryValue
OBJECT-TYPE
The additional attribute value
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkAttributeTable
OBJECT-TYPE
This table contains the descriptions of noticeable link attributes
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.3not-accessiblecurrent
jdsuOnmsiLinkAttributeEntry
OBJECT-TYPE
A link attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.3.1not-accessiblecurrent
jdsuOnmsiLinkAttributeEntryName
OBJECT-TYPE
The attribute name. The additional attributes are prefixed with an underscore character to avoid name collision with standard attributes
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.3.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkAttributeEntryAdditional
OBJECT-TYPE
This flag indicates whether the attribute is additional
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.3.1.2TruthValueread-onlycurrent
jdsuOnmsiLinkAttributeEntryFindable
OBJECT-TYPE
This flag indicates whether the attribute is findable
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.3.1.3TruthValueread-onlycurrent
jdsuOnmsiLinkAttributeEntryUpdatable
OBJECT-TYPE
This flag indicates whether the attribute is updatable
1.3.6.1.4.1.35873.5.1.1.1.3.4.1.3.1.4TruthValueread-onlycurrent
jdsuOnmsiLinkFunctions
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.4.2
jdsuOnmsiLinkGet
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.1
jdsuOnmsiLinkGetParamInternalKey
OBJECT-TYPE
The internal key of the link to retrieve
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.1.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiLinkGetExecute
OBJECT-TYPE
Setting this field to 1 performs the link retrieval
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.1.2INTEGERread-writecurrent
jdsuOnmsiLinkGetError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkFind
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.2
jdsuOnmsiLinkFindParamAttribute
OBJECT-TYPE
The attribute of the link to perform the search on. Valid attributes for links are : - name and any additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.2.1JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiLinkFindParamValue
OBJECT-TYPE
The attribute value to find
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.2.2JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiLinkFindExecute
OBJECT-TYPE
Setting this field to 1 performs the link find
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.2.3INTEGERread-writecurrent
jdsuOnmsiLinkFindError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.2.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkUpdate
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.3
jdsuOnmsiLinkUpdateParamInternalKey
OBJECT-TYPE
The internal key of the link to update
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.3.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiLinkUpdateExecute
OBJECT-TYPE
Setting this field to 1 performs the link udpate
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.3.2INTEGERread-writecurrent
jdsuOnmsiLinkUpdateError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.3.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiLinkAttributeLoad
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.4
jdsuOnmsiLinkAttributeLoadExecute
OBJECT-TYPE
Setting this field to 1 performs the jdsuOnmsiLinkAttributeTable load
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.4.1INTEGERread-writecurrent
jdsuOnmsiLinkAttributeLoadError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.4.2.4.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestService
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.5
jdsuOnmsiMonitoringTestData
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.5.1
jdsuOnmsiMonitoringTestTable
OBJECT-TYPE
This table contains the standard link data
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1not-accessiblecurrent
jdsuOnmsiMonitoringTestEntry
OBJECT-TYPE
A monitoring test entry
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1not-accessiblecurrent
jdsuOnmsiMonitoringTestEntryInternalKey
OBJECT-TYPE
The internal key of the monitoring test
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiMonitoringTestEntryName
OBJECT-TYPE
The name of the monitoring test
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestEntryDescription
OBJECT-TYPE
The description of the monitoring test
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestEntryLinkInternalKey
OBJECT-TYPE
The internal key of the monitoring test's link
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.4JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiMonitoringTestEntryDisplayOrder
OBJECT-TYPE
The display order ot the monitoring test
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.5INTEGERread-onlycurrent
jdsuOnmsiMonitoringTestEntrySeverity
OBJECT-TYPE
The severity of the monitoring test
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.6JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiMonitoringTestEntryDetectionConfiguration
OBJECT-TYPE
The detection configuration of the monitoring test in a serialized form (key1=value1|key2=value2|...). It contains the following keys: - firstMarkerDistanceM: the distance of the first marker, in meters - lastMarkerDistanceM: the distance of the last marker, in meters - acqDurationSec: the acquisition duration of the detection reference, in seconds - pulseNs: the pulse of the detection reference, in ns - rangeKm: the range of the detection reference, in km - fiberIndex: the fiber index of the detection reference - resolutionCm: the resolution of the detection reference, in cm - wavelengthNm: the wavelength of the detection reference, in nm
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.7JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestEntryLocalizationConfiguration
OBJECT-TYPE
The localization configuration of the monitoring test in a serialized form (key1=value1|key2=value2|...). It contains the following keys: - acqDurationSec: the acquisition duration of the localization reference, in seconds - pulseNs: the pulse of the localization reference, in ns - rangeKm: the range of the localization reference, in km - fiberIndex: the fiber index of the localization reference - resolutionCm: the resolution of the localization reference, in cm - wavelengthNm: the wavelength of the localization reference, in nm
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.8JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestEntrySchedulingConfiguration
OBJECT-TYPE
The scheduling configuration of the monitoring test in a serialized form (key1=value1|key2=value2|...). It contains the following keys: - scheduled: this flag indicates whether the monitoring test is periodic or not (true/false) - periodical: this flag indicates whether the monitoring test is scheduled or not (true/false) - startDate: the date at which the monitoring test scheduling starts, in seconds since January 1, 1970, 00:00:00 GMT - frequencyMin: the period of the monitoring test scheduling (if the test is periodic), in minutes
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.1.1.9JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestAdditionalAttributeTable
OBJECT-TYPE
This table contains the additional attributes on monitoring tests
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.2not-accessiblecurrent
jdsuOnmsiMonitoringTestAdditionalAttributeEntry
OBJECT-TYPE
A monitoring test additional attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.2.1not-accessiblecurrent
jdsuOnmsiMonitoringTestAdditionalAttributeEntryInternalKey
OBJECT-TYPE
The internal key of the monitoring test
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.2.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiMonitoringTestAdditionalAttributeEntryName
OBJECT-TYPE
The additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.2.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestAdditionalAttributeEntryValue
OBJECT-TYPE
The additional attribute value
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestAttributeTable
OBJECT-TYPE
This table contains the descriptions of noticeable monitoring test attributes
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.3not-accessiblecurrent
jdsuOnmsiMonitoringTestAttributeEntry
OBJECT-TYPE
A monitoring test attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.3.1not-accessiblecurrent
jdsuOnmsiMonitoringTestAttributeEntryName
OBJECT-TYPE
The attribute name. The additional attributes are prefixed with an underscore character to avoid name collision with standard attributes
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.3.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestAttributeEntryAdditional
OBJECT-TYPE
This flag indicates whether the attribute is additional
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.3.1.2TruthValueread-onlycurrent
jdsuOnmsiMonitoringTestAttributeEntryFindable
OBJECT-TYPE
This flag indicates whether the attribute is findable
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.3.1.3TruthValueread-onlycurrent
jdsuOnmsiMonitoringTestAttributeEntryUpdatable
OBJECT-TYPE
This flag indicates whether the attribute is updatable
1.3.6.1.4.1.35873.5.1.1.1.3.5.1.3.1.4TruthValueread-onlycurrent
jdsuOnmsiMonitoringTestFunctions
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.5.2
jdsuOnmsiMonitoringTestGet
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.1
jdsuOnmsiMonitoringTestGetParamInternalKey
OBJECT-TYPE
The internal key of the monitoring test to retrieve
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.1.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiMonitoringTestGetExecute
OBJECT-TYPE
Setting this field to 1 performs the monitoring test retrieval
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.1.2INTEGERread-writecurrent
jdsuOnmsiMonitoringTestGetError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestFind
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.2
jdsuOnmsiMonitoringTestFindParamAttribute
OBJECT-TYPE
The attribute of the monitoring test to perform the search on. Valid attributes for monitoring tests are : - linkInternalKey - name and any additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.2.1JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiMonitoringTestFindParamValue
OBJECT-TYPE
The attribute value to find
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.2.2JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiMonitoringTestFindExecute
OBJECT-TYPE
Setting this field to 1 performs the monitoring test find
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.2.3INTEGERread-writecurrent
jdsuOnmsiMonitoringTestFindError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.2.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestStartTest
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.3
jdsuOnmsiMonitoringTestStartTestParamInternalKey
OBJECT-TYPE
The internal key of the monitoring test to start
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.3.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiMonitoringTestStartTestExecute
OBJECT-TYPE
Setting this field to 1 performs the monitoring test start
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.3.2INTEGERread-writecurrent
jdsuOnmsiMonitoringTestStartTestError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.3.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiMonitoringTestAttributeLoad
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.4
jdsuOnmsiMonitoringTestAttributeLoadExecute
OBJECT-TYPE
Setting this field to 1 performs the jdsuOnmsiMonitoringTestAttributeTable load
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.4.1INTEGERread-writecurrent
jdsuOnmsiMonitoringTestAttributeLoadError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.5.2.4.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmService
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6
jdsuOnmsiAlarmData
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.1
jdsuOnmsiAlarmTypesTable
OBJECT-TYPE
This table provides the list of the alarm types
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.1not-accessiblecurrent
jdsuOnmsiAlarmTypesEntry
OBJECT-TYPE
An alarm type entry
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.1.1not-accessiblecurrent
jdsuOnmsiAlarmTypeName
OBJECT-TYPE
The name of the alarm type
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.1.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmSpecificProblemsTable
OBJECT-TYPE
This table provides the list of the specific problems
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.2not-accessiblecurrent
jdsuOnmsiAlarmSpecificProblemsEntry
OBJECT-TYPE
An alarm specific problem entry
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.2.1not-accessiblecurrent
jdsuOnmsiAlarmSpecificProblemName
OBJECT-TYPE
The name of the alarm specific problem
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.2.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventTable
OBJECT-TYPE
This table contains the standard alarm event data
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3not-accessiblecurrent
jdsuOnmsiAlarmEventEntry
OBJECT-TYPE
An alarm event entry
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1not-accessiblecurrent
jdsuOnmsiAlarmEventEntrySequence
OBJECT-TYPE
This is the sequence of the alarm event. It is used for synchronization between ONMSi and the SNMP manager. This sequence number is unique (for each alarm event/manager community/user) and there is no gap between two alarm events, to ensure no alarm event is ever missed. A resynchronization will reset the sequence to 1
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.1Unsigned32read-onlycurrent
jdsuOnmsiAlarmEventEntryEventInternalKey
OBJECT-TYPE
The internal key of the alarm event
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.2JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiAlarmEventEntryEventType
OBJECT-TYPE
The type of the alarm event
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.3JdsuOnmsiAlarmEventTyperead-onlycurrent
jdsuOnmsiAlarmEventEntryEventTime
OBJECT-TYPE
The date/time of the alarm event
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.4DateAndTimeread-onlycurrent
jdsuOnmsiAlarmEventEntryEventClearStatus
OBJECT-TYPE
The clear status of the alarm event
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.5JdsuOnmsiAlarmClearStatusread-onlycurrent
jdsuOnmsiAlarmEventEntryEventAckStatus
OBJECT-TYPE
The acknowledgement status of the alarm event
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.6JdsuOnmsiAlarmAckStatusread-onlycurrent
jdsuOnmsiAlarmEventEntryEventPerceivedSeverity
OBJECT-TYPE
The perceived severity of the alarm event
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.7JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiAlarmEventEntryEventProbableCause
OBJECT-TYPE
The ITU probable cause of the alarm event (see IANAItuProbableCause)
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.8IANAItuProbableCauseread-onlycurrent
jdsuOnmsiAlarmEventEntryEventAdditionalText
OBJECT-TYPE
The textual additional information on the alarm event
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.9JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventUserIdentifier
OBJECT-TYPE
The user identifier (login), if the alarm event is due to a user action
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.10JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventMonitoringTestSpecificInfos
OBJECT-TYPE
The serialized monitoring test specific info of the alarm event. This Alarm Specific Info describes the point to point monitoring test that detected the problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a monitoring test processing. It contains the following keys: - internalKey: the internal key of the monitoring test - name: the name of the monitoring test - firstMarkerDistanceM: the distance of the first marker, in meters - lastMarkerDistanceM: the distance of the last marker, in meters - det.acqDurationSec: the acquisition duration of the detection reference, in seconds - det.pulseNs: the pulse of the detection reference, in ns - det.rangeKm: the range of the detection reference, in km - det.resolutionCm: the resolution of the detection reference, in cm - det.wavelengthNm: the wavelength of the detection reference, in nm - det.fiberIndex: the fiber index of the detection reference - loc.acqDurationSec: the acquisition duration of the localization reference, in seconds - loc.pulseNs: the pulse of the localization reference, in ns - loc.rangeKm: the range of the localization reference, in km - loc.resolutionCm: the resolution of the localization reference, in cm - loc.wavelengthNm: the wavelength of the localization reference, in nm - loc.fiberIndex: the fiber index of the localization reference - scheduled: this flag indicates whether the monitoring test is periodic or not (true/false) - periodical: this flag indicates whether the monitoring test is scheduled or not (true/false) - startDate: the date at which the monitoring test scheduling starts, in seconds since January 1, 1970, 00:00:00 GMT - frequencyMin: the period of the monitoring test scheduling (if the test is periodic), in minutes
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.11JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventPointToPointSpecificInfos
OBJECT-TYPE
The serialized point to point specific info of the alarm event. This Alarm Specific Info contains data on a point to point problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a point to point test processing. It contains the following keys: - deviationFirstMarkerDb: the deviation at the first marker, in dB (Can be empty if the value in not valid) - deviationLinkLossDb: the deviation of the link loss, in dB (Can be empty if the value in not valid) - problemConfirmed: this flag indicates whether the problem was confirmed - rootCause: indicate what may be the root cause of the problem (ex: CONNECTOR)
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.12JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventAttenuationSpecificInfos
OBJECT-TYPE
The serialized attenuation specific info of the alarm event. This Alarm Specific Info describes a point to point attenuation problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is ATTENUATION. It contains the following keys: - attenuationDb: the value of the attenuation, in dB (Can be empty if the value in not valid) - distanceM: the distance of the problem, in meters (Can be empty if the value in not valid)
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.13JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventPeakSpecificInfos
OBJECT-TYPE
The serialized peak specific info of the alarm event. This Alarm Specific Info describes a point to point peak problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is PEAK or NEW_PEAK. It contains the following keys: measuredBottomDistanceM: the measured distance of the peak bottom, in meters measuredLevelDb: the measured level of the peak, in dB (Can be empty if the value in not valid) measuredTopDistanceM: the measured distance of the peak top, in meters referenceBottomDistanceM: the reference distance of the peak bottom, in meters referenceLevelDb: the reference level of the peak, in dB - referenceTopDistanceM: the reference distance of the peak top, in meters
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.14JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventOrlSpecificInfos
OBJECT-TYPE
The serialized ORL specific info of the alarm event. This Alarm Specific Info describes a point to point ORL problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is ORL. It contains the following keys: - measuredOrlDb: the measured ORL, in dB (Can be empty if the value in not valid) - referenceOrlDb: the reference ORL, in dB
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.15JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventFiberLengthExtensionSpecificInfos
OBJECT-TYPE
The serialized fiber length extension specific info of the alarm event. This Alarm Specific Info describes a point to point fiber length extension problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is FIBER_LENGTH_EXTENSION. It contains the following keys: - measuredFiberLengthM: the measured fiber length, in meters (Can be empty if the value in not valid) - referenceFiberLengthM: the reference fiber length, in meters
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.16JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventLocalizationSpecificInfos
OBJECT-TYPE
The serialized localization specific info of the alarm event. This Alarm Specific Info describes a point to point fiber length extension problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is FIBER_LENGTH_EXTENSION. It contains the following keys: - opticalDistanceFromOriginM: the optical distance between the origin and the point to point problem, in meters - primaryLandmarkAfterDistanceM: the distance between the problem and the primary alarm landmark after the problem, in meters - primaryLandmarkAfterName: the name of primary alarm landmark after the problem - primaryLandmarkAfterDescription: the description of primary alarm landmark after the problem - primaryLandmarkBeforeDistanceM: the distance between the problem and the primary alarm landmark before the problem, in meters - primaryLandmarkBeforeName: the name of primary alarm landmark before the problem - primaryLandmarkBeforeDescription: the description of primary alarm landmark before the problem - secondaryLandmarkAfterDistanceM: the distance between the problem and the secondary alarm landmark after the problem, in meters - secondaryLandmarkAfterName: the name of secondary alarm landmark after the problem - secondaryLandmarkAfterDescription: the description of secondary alarm landmark after the problem - secondaryLandmarkBeforeDistanceM: the distance between the problem and the secondary alarm landmark before the problem, in meters - secondaryLandmarkBeforeName: the name of secondary alarm landmark before the problem - secondaryLandmarkBeforeDescription: the description of secondary alarm landmark before the problem
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.17JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmInternalKey
OBJECT-TYPE
The internal key of the alarm
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.18JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmType
OBJECT-TYPE
The ITU event type of the alarm (see IANAItuEventType)
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.19IANAItuEventTyperead-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmRaisedTime
OBJECT-TYPE
The date/time of alarm creation
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.20DateAndTimeread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmChangedTime
OBJECT-TYPE
The date/time of alarm latest update
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.21DateAndTimeread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmClearStatus
OBJECT-TYPE
The clear status of the alarm
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.22JdsuOnmsiAlarmClearStatusread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmAckStatus
OBJECT-TYPE
The acknowledgement status of the alarm
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.23JdsuOnmsiAlarmAckStatusread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmPerceivedSeverity
OBJECT-TYPE
The perceived severity of the alarm
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.24JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmSpecificProblem
OBJECT-TYPE
The specific problem of the alarm
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.25DisplayStringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmOriginatingEntityKind
OBJECT-TYPE
The kind of the entity to which the alarm applies: - OTU - LINK - SECTION - SERVER
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.26DisplayStringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmOriginatingEntityInternalKey
OBJECT-TYPE
The internal key of the entity to which the alarm applies
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.27JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmOriginatingEntityName
OBJECT-TYPE
Tthe name of the entity to which the alarm applies
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.28JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmOriginatingEntityOid
OBJECT-TYPE
The OID of the entity to which the alarm applies
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.29JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmSystemDN
OBJECT-TYPE
The name of the system that created the alarm
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.30DisplayStringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmProbableCause
OBJECT-TYPE
The ITU probable cause of the alarm (se IANAItuProbableCause)
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.31IANAItuProbableCauseread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmAdditionalText
OBJECT-TYPE
The textual additional information on the alarm
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.32JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmMonitoringTestSpecificInfos
OBJECT-TYPE
The serialized monitoring test specific info of the alarm. This Alarm Specific Info describes the point to point monitoring test that detected the problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a monitoring test processing. It contains the following keys: - internalKey: the internal key of the monitoring test - name: the name of the monitoring test - firstMarkerDistanceM: the distance of the first marker, in meters - lastMarkerDistanceM: the distance of the last marker, in meters - det.acqDurationSec: the acquisition duration of the detection reference, in seconds - det.pulseNs: the pulse of the detection reference, in ns - det.rangeKm: the range of the detection reference, in km - det.resolutionCm: the resolution of the detection reference, in cm - det.wavelengthNm: the wavelength of the detection reference, in nm - det.fiberIndex: the fiber index of the detection reference - loc.acqDurationSec: the acquisition duration of the localization reference, in seconds - loc.pulseNs: the pulse of the localization reference, in ns - loc.rangeKm: the range of the localization reference, in km - loc.resolutionCm: the resolution of the localization reference, in cm - loc.wavelengthNm: the wavelength of the localization reference, in nm - loc.fiberIndex: the fiber index of the localization reference - scheduled: this flag indicates whether the monitoring test is periodic or not (true/false) - periodical: this flag indicates whether the monitoring test is scheduled or not (true/false) - startDate: the date at which the monitoring test scheduling starts, in seconds since January 1, 1970, 00:00:00 GMT - frequencyMin: the period of the monitoring test scheduling (if the test is periodic), in minutes
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.33JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmPointToPointSpecificInfos
OBJECT-TYPE
The serialized point to point specific info of the alarm. This Alarm Specific Info contains data on a point to point problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a point to point test processing. It contains the following keys: - deviationFirstMarkerDb: the deviation at the first marker, in dB (Can be empty if the value in not valid) - deviationLinkLossDb: the deviation of the link loss, in dB (Can be empty if the value in not valid) - problemConfirmed: this flag indicates whether the problem was confirmed - rootCause: indicate what may be the root cause of the problem (ex: CONNECTOR)
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.34JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmAttenuationSpecificInfos
OBJECT-TYPE
The serialized attenuation specific info of the alarm. This Alarm Specific Info describes a point to point attenuation problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is ATTENUATION. It contains the following keys: - attenuationDb: the value of the attenuation, in dB (Can be empty if the value in not valid) - distanceM: the distance of the problem, in meters (Can be empty if the value in not valid)
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.35JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmPeakSpecificInfos
OBJECT-TYPE
The serialized peak specific info of the alarm. This Alarm Specific Info describes a point to point peak problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is PEAK or NEW_PEAK. It contains the following keys: measuredBottomDistanceM: the measured distance of the peak bottom, in meters measuredLevelDb: the measured level of the peak, in dB (Can be empty if the value in not valid) measuredTopDistanceM: the measured distance of the peak top, in meters referenceBottomDistanceM: the reference distance of the peak bottom, in meters referenceLevelDb: the reference level of the peak, in dB - referenceTopDistanceM: the reference distance of the peak top, in meters
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.36JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmOrlSpecificInfos
OBJECT-TYPE
The serialized ORL specific info of the alarm. This Alarm Specific Info describes a point to point ORL problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is ORL. It contains the following keys: - measuredOrlDb: the measured ORL, in dB (Can be empty if the value in not valid) - referenceOrlDb: the reference ORL, in dB
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.37JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmFiberLengthExtensionSpecificInfos
OBJECT-TYPE
The serialized fiber length extension specific info of the alarm. This Alarm Specific Info describes a point to point fiber length extension problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is FIBER_LENGTH_EXTENSION. It contains the following keys: - measuredFiberLengthM: the measured fiber length, in meters (Can be empty if the value in not valid) - referenceFiberLengthM: the reference fiber length, in meters
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.38JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmLocalizationSpecificInfos
OBJECT-TYPE
The serialized localization specific info of the alarm. This Alarm Specific Info describes a point to point fiber length extension problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the specific problem is FIBER_LENGTH_EXTENSION. It contains the following keys: - opticalDistanceFromOriginM: the optical distance between the origin and the point to point problem, in meters - primaryLandmarkAfterDistanceM: the distance between the problem and the primary alarm landmark after the problem, in meters - primaryLandmarkAfterName: the name of primary alarm landmark after the problem - primaryLandmarkAfterDescription: the description of primary alarm landmark after the problem - primaryLandmarkBeforeDistanceM: the distance between the problem and the primary alarm landmark before the problem, in meters - primaryLandmarkBeforeName: the name of primary alarm landmark before the problem - primaryLandmarkBeforeDescription: the description of primary alarm landmark before the problem - secondaryLandmarkAfterDistanceM: the distance between the problem and the secondary alarm landmark after the problem, in meters - secondaryLandmarkAfterName: the name of secondary alarm landmark after the problem - secondaryLandmarkAfterDescription: the description of secondary alarm landmark after the problem - secondaryLandmarkBeforeDistanceM: the distance between the problem and the secondary alarm landmark before the problem, in meters - secondaryLandmarkBeforeName: the name of secondary alarm landmark before the problem - secondaryLandmarkBeforeDescription: the description of secondary alarm landmark before the problem
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.39JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmOriginatingEntity
OBJECT-TYPE
The serialized entity to which the alarm applies. This field is to provide more information that the kind, name and internal key of the alarm originating entity. It will contain data in a serialized form (key1=value1|key2=value2|...). It contains the following keys: - internalKey: the internal key of the entity to which the alarm applies - name: the name of the entity to which the alarm applies - kind: the kind of the entity to which the alarm applies (see Alarm Originating Entity Kind) Moreover, it will contains keys for attributes that are specific to the kind of entity to which the alarm applies: - link: see jdsuOnmsiLinkTable (ex: measureEnabled=true|...) - OTU: see jdsuOnmsiOtuTable (ex: ipAddress=192.198.1.14|...) It also contains keys for the additional attributes (which start with the underscore character: '_') of the entity to which the alarm applies: _additionalAttribute1Name=additionalAttribute1Value|... Finally, it may contain keys about contextual data: - when the alarm originating entity is a link: the OTU - when the alarm originating entity is a section: the OTU and the link These attributes will be prefixed to indicate the contextual object (ex: link._gisId=...|otu.ipAddress=...)
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.40JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventGpsCoordinatesSpecificInfos
OBJECT-TYPE
The serialized GPS coordinates specific info of the event. This Alarm Specific Info contains the GPS coordinates of the problem in a serialized form (key1=value1|key2=value2|...). You will get one when the alarm can be geolocalized (such as an attenuation problem on a link using geographical file). It contains the following keys: - latitude: the GPS latitude of the problem, in decimal degrees - longitude: the GPS longitude of the problem, in decimal degrees
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.41JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmGpsCoordinatesSpecificInfos
OBJECT-TYPE
The serialized GPS coordinates specific info of the alarm. This Alarm Specific Info contains the GPS coordinates of the problem in a serialized form (key1=value1|key2=value2|...). You will get one when the alarm can be geolocalized (such as an attenuation problem on a link using geographical file). It contains the following keys: - latitude: the GPS latitude of the problem, in decimal degrees - longitude: the GPS longitude of the problem, in decimal degrees
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.42JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventPonSpecificInfos
OBJECT-TYPE
The serialized PON specific info of the event. This Alarm Specific Info contains data on a PON problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a PON test processing. It contains the following keys: - ponTestInternalKey: the internal key of the PON test - peakInAlarmCount: the peak in alarm count - newPeakCount: the new peak count - peakChangeCount: the peak change count
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.43JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmPonSpecificInfos
OBJECT-TYPE
The serialized PON specific info of the alarm. This Alarm Specific Info contains data on a PON problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a PON test processing. It contains the following keys: - ponTestInternalKey: the internal key of the PON test - peakInAlarmCount: the peak in alarm count - newPeakCount: the new peak count - peakChangeCount: the peak change count
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.44JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventSplitterSpecificInfos
OBJECT-TYPE
The serialized splitter specific info of the event. This Alarm Specific Info contains data on a splitter problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a PTP test processing. It contains the following keys: - localizationResult: LOCALIZED/NOT_LOCALIZED - opticalDistanceFromOriginM: if LOCALIZED, the fault distance from the OTDR - opticalDistanceFromLastMarkerM: if LOCALIZED, the fault distance from the last marker - peakInAlarmCount: the peak in alarm count - peakChangeCount: the peak change count
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.45JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmSplitterSpecificInfos
OBJECT-TYPE
The serialized splitter specific info of the alarm. This Alarm Specific Info contains data on a splitter problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a PTP test processing. It contains the following keys: - localizationResult: LOCALIZED/NOT_LOCALIZED - opticalDistanceFromOriginM: if LOCALIZED, the fault distance from the OTDR - opticalDistanceFromLastMarkerM: if LOCALIZED, the fault distance from the last marker - peakInAlarmCount: the peak in alarm count - peakChangeCount: the peak change count
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.46JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventStrainSpecificInfos
OBJECT-TYPE
The serialized strain specific info of the event. This Alarm Specific Info contains data on a strain problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a sensing test processing. It contains the following keys: If any positive threshold is monitored: - positionM.max: the position of the maximum value If any negative threshold is monitored: - positionM.min: the position of the minimum value If the positive minMax is monitored: - minMax.max.valueUE: contains the positive min/max value, in micro strain - minMax.min.valueUE: contains the negative min/max value, in micro strain If the positive minMax is monitored and in alarm: - minMax.max.sev: contains the severity of the positive min/max monitoring - minMax.min.sev: contains the severity of the negative min/max monitoring - minMax.max.startM: the first distance at which the positive min/max threshold was crossed - minMax.min.startM: the first distance at which the negative min/max threshold was crossed - minMax.max.endM: the last distance at which the positive min/max threshold was crossed - minMax.min.endM: the last distance at which the negative min/max threshold was crossed If the positive minMax is monitored: - devAvg.ref.valueUE: contains the average value, in micro strain - devAvg.max.valueUE: contains the positive diff from average value, in micro strain - devAvg.min.valueUE: contains the negative diff from average value, in micro strain If the positive minMax is monitored and in alarm: - devAvg.max.sev: contains the severity of the positive diff from average monitoring - devAvg.min.sev: contains the severity of the negative diff from average monitoring - devAvg.max.startM: the first distance at which the positive diff from average threshold was crossed - devAvg.min.startM: the first distance at which the negative diff from average threshold was crossed - devAvg.max.endM: the last distance at which the positive diff from average threshold was crossed - devAvg.min.endM: the last distance at which the negative diff from average threshold was crossed If the positive minMax is monitored: - devMed.ref.valueUE: contains the median value, in micro strain - devMed.max.valueUE: contains the positive diff from median value, in micro strain - devMed.min.valueUE: contains the negative diff from median value, in micro strain If the positive minMax is monitored and in alarm: - devMed.max.sev: contains the severity of the positive diff from median monitoring - devMed.min.sev: contains the severity of the negative diff from median monitoring - devMed.max.startM: the first distance at which the positive diff from median threshold was crossed - devMed.min.startM: the first distance at which the negative diff from median threshold was crossed - devMed.max.endM: the last distance at which the positive diff from median threshold was crossed - devMed.min.endM: the last distance at which the negative diff from median threshold was crossed
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.47JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmStrainSpecificInfos
OBJECT-TYPE
The serialized strain specific info of the alarm. This Alarm Specific Info contains data on a strain problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a sensing test processing. It contains the following keys: If any positive threshold is monitored: - positionM.max: the position of the maximum value If any negative threshold is monitored: - positionM.min: the position of the minimum value If the positive minMax is monitored: - minMax.max.valueUE: contains the positive min/max value, in micro strain - minMax.min.valueUE: contains the negative min/max value, in micro strain If the positive minMax is monitored and in alarm: - minMax.max.sev: contains the severity of the positive min/max monitoring - minMax.min.sev: contains the severity of the negative min/max monitoring - minMax.max.startM: the first distance at which the positive min/max threshold was crossed - minMax.min.startM: the first distance at which the negative min/max threshold was crossed - minMax.max.endM: the last distance at which the positive min/max threshold was crossed - minMax.min.endM: the last distance at which the negative min/max threshold was crossed If the positive minMax is monitored: - devAvg.ref.valueUE: contains the average value, in micro strain - devAvg.max.valueUE: contains the positive diff from average value, in micro strain - devAvg.min.valueUE: contains the negative diff from average value, in micro strain If the positive minMax is monitored and in alarm: - devAvg.max.sev: contains the severity of the positive diff from average monitoring - devAvg.min.sev: contains the severity of the negative diff from average monitoring - devAvg.max.startM: the first distance at which the positive diff from average threshold was crossed - devAvg.min.startM: the first distance at which the negative diff from average threshold was crossed - devAvg.max.endM: the last distance at which the positive diff from average threshold was crossed - devAvg.min.endM: the last distance at which the negative diff from average threshold was crossed If the positive minMax is monitored: - devMed.ref.valueUE: contains the median value, in micro strain - devMed.max.valueUE: contains the positive diff from median value, in micro strain - devMed.min.valueUE: contains the negative diff from median value, in micro strain If the positive minMax is monitored and in alarm: - devMed.max.sev: contains the severity of the positive diff from median monitoring - devMed.min.sev: contains the severity of the negative diff from median monitoring - devMed.max.startM: the first distance at which the positive diff from median threshold was crossed - devMed.min.startM: the first distance at which the negative diff from median threshold was crossed - devMed.max.endM: the last distance at which the positive diff from median threshold was crossed - devMed.min.endM: the last distance at which the negative diff from median threshold was crossed
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.48JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryEventTemperatureSpecificInfos
OBJECT-TYPE
The serialized temperature specific info of the event. This Alarm Specific Info contains data on a temperature problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a sensing test processing. It contains the following keys: If any positive threshold is monitored: - positionM.max: the position of the maximum value If any negative threshold is monitored: - positionM.min: the position of the minimum value If the positive minMax is monitored: - minMax.max.valueC: contains the positive min/max value, in degree C - minMax.min.valueC: contains the negative min/max value, in degree C If the positive minMax is monitored and in alarm: - minMax.max.sev: contains the severity of the positive min/max monitoring - minMax.min.sev: contains the severity of the negative min/max monitoring - minMax.max.startM: the first distance at which the positive min/max threshold was crossed - minMax.min.startM: the first distance at which the negative min/max threshold was crossed - minMax.max.endM: the last distance at which the positive min/max threshold was crossed - minMax.min.endM: the last distance at which the negative min/max threshold was crossed If the positive minMax is monitored: - devAvg.ref.valueC: contains the average value, in degree C - devAvg.max.valueC: contains the positive diff from average value, in degree C - devAvg.min.valueC: contains the negative diff from average value, in degree C If the positive minMax is monitored and in alarm: - devAvg.max.sev: contains the severity of the positive diff from average monitoring - devAvg.min.sev: contains the severity of the negative diff from average monitoring - devAvg.max.startM: the first distance at which the positive diff from average threshold was crossed - devAvg.min.startM: the first distance at which the negative diff from average threshold was crossed - devAvg.max.endM: the last distance at which the positive diff from average threshold was crossed - devAvg.min.endM: the last distance at which the negative diff from average threshold was crossed If the positive minMax is monitored: - devMed.ref.valueC: contains the median value, in degree C - devMed.max.valueC: contains the positive diff from median value, in degree C - devMed.min.valueC: contains the negative diff from median value, in degree C If the positive minMax is monitored and in alarm: - devMed.max.sev: contains the severity of the positive diff from median monitoring - devMed.min.sev: contains the severity of the negative diff from median monitoring - devMed.max.startM: the first distance at which the positive diff from median threshold was crossed - devMed.min.startM: the first distance at which the negative diff from median threshold was crossed - devMed.max.endM: the last distance at which the positive diff from median threshold was crossed - devMed.min.endM: the last distance at which the negative diff from median threshold was crossed
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.49JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmTemperatureSpecificInfos
OBJECT-TYPE
The serialized temperature specific info of the alarm. This Alarm Specific Info contains data on a temperature problem in a serialized form (key1=value1|key2=value2|...). It will be filled when the alarm is issued after a sensing test processing. It contains the following keys: If any positive threshold is monitored: - positionM.max: the position of the maximum value If any negative threshold is monitored: - positionM.min: the position of the minimum value If the positive minMax is monitored: - minMax.max.valueC: contains the positive min/max value, in degree C - minMax.min.valueC: contains the negative min/max value, in degree C If the positive minMax is monitored and in alarm: - minMax.max.sev: contains the severity of the positive min/max monitoring - minMax.min.sev: contains the severity of the negative min/max monitoring - minMax.max.startM: the first distance at which the positive min/max threshold was crossed - minMax.min.startM: the first distance at which the negative min/max threshold was crossed - minMax.max.endM: the last distance at which the positive min/max threshold was crossed - minMax.min.endM: the last distance at which the negative min/max threshold was crossed If the positive minMax is monitored: - devAvg.ref.valueC: contains the average value, in degree C - devAvg.max.valueC: contains the positive diff from average value, in degree C - devAvg.min.valueC: contains the negative diff from average value, in degree C If the positive minMax is monitored and in alarm: - devAvg.max.sev: contains the severity of the positive diff from average monitoring - devAvg.min.sev: contains the severity of the negative diff from average monitoring - devAvg.max.startM: the first distance at which the positive diff from average threshold was crossed - devAvg.min.startM: the first distance at which the negative diff from average threshold was crossed - devAvg.max.endM: the last distance at which the positive diff from average threshold was crossed - devAvg.min.endM: the last distance at which the negative diff from average threshold was crossed If the positive minMax is monitored: - devMed.ref.valueC: contains the median value, in degree C - devMed.max.valueC: contains the positive diff from median value, in degree C - devMed.min.valueC: contains the negative diff from median value, in degree C If the positive minMax is monitored and in alarm: - devMed.max.sev: contains the severity of the positive diff from median monitoring - devMed.min.sev: contains the severity of the negative diff from median monitoring - devMed.max.startM: the first distance at which the positive diff from median threshold was crossed - devMed.min.startM: the first distance at which the negative diff from median threshold was crossed - devMed.max.endM: the last distance at which the positive diff from median threshold was crossed - devMed.min.endM: the last distance at which the negative diff from median threshold was crossed
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.50JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmEventEntryAlarmAdditionalAttributes
OBJECT-TYPE
It will contain alarm's additional attributes in a serialized form (_additionalAttribute1Name=additionalAttribute1Value|_additionalAttribute2Name=additionalAttribute2Name|...).
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.3.1.51JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmSplitterPeakTable
OBJECT-TYPE
This table contains peak details for a splitter fault. Load it with jdsuOnmsiAlarmSplitterPeakLoad
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4not-accessiblecurrent
jdsuOnmsiAlarmSplitterPeakEntry
OBJECT-TYPE
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1not-accessiblecurrent
jdsuOnmsiAlarmSplitterPeakEntryInternalKey
OBJECT-TYPE
The peak internal key
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryName
OBJECT-TYPE
The peak name
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryPerceivedSeverity
OBJECT-TYPE
The severity of the peak
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.3JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryPreviousSeverity
OBJECT-TYPE
The previous severity of the peak
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.4JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryReferenceBottomDistance
OBJECT-TYPE
The distance of the reference peak's bottom Unit : millimeters
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.5INTEGERread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryReferenceTopDistance
OBJECT-TYPE
The distance of the reference peak's top Unit : millimeters
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.6INTEGERread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryReferenceLevel
OBJECT-TYPE
The level of the reference peak Unit : dB / 100
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.7INTEGERread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryPeakMeasurementValid
OBJECT-TYPE
Whether the peak measurement is valid
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.8TruthValueread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryMeasuredBottomDistance
OBJECT-TYPE
The distance of the measured peak's bottom Unit : millimeters
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.9INTEGERread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryMeasuredTopDistance
OBJECT-TYPE
The distance of the measured peak's top Unit : millimeters
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.10INTEGERread-onlycurrent
jdsuOnmsiAlarmSplitterPeakEntryMeasuredLevel
OBJECT-TYPE
The level of the measured peak Unit : dB / 100
1.3.6.1.4.1.35873.5.1.1.1.3.6.1.4.1.11INTEGERread-onlycurrent
jdsuOnmsiAlarmFunctions
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.2
jdsuOnmsiAlarmAck
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.1
jdsuOnmsiAlarmAckParamInternalKey
OBJECT-TYPE
The internal key of the alarm to acknowledge
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.1.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiAlarmAckExecute
OBJECT-TYPE
Setting this field to 1 performs the alarm acknowledgement
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.1.2INTEGERread-writecurrent
jdsuOnmsiAlarmAckError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmUnAck
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.2
jdsuOnmsiAlarmUnAckParamInternalKey
OBJECT-TYPE
The internal key of the alarm to unacknowledge
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.2.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiAlarmUnAckExecute
OBJECT-TYPE
Setting this field to 1 performs the alarm unacknowledgement
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.2.2INTEGERread-writecurrent
jdsuOnmsiAlarmUnAckError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.2.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmClear
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.3
jdsuOnmsiAlarmClearParamInternalKey
OBJECT-TYPE
The internal key of the alarm to clear
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.3.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiAlarmClearExecute
OBJECT-TYPE
Setting this field to 1 performs the alarm clear
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.3.2INTEGERread-writecurrent
jdsuOnmsiAlarmClearError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.3.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmUnClear
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.4
jdsuOnmsiAlarmUnClearParamInternalKey
OBJECT-TYPE
The internal key of the alarm to unclear
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.4.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiAlarmUnClearExecute
OBJECT-TYPE
Setting this field to 1 performs the alarm unclear
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.4.2INTEGERread-writecurrent
jdsuOnmsiAlarmUnClearError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.4.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmResendEvents
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.5
jdsuOnmsiAlarmResendEventsParamSequence
OBJECT-TYPE
The sequence number of the first jdsuOnmsiAlarmEventTrap to resend
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.5.1Unsigned32read-writecurrent
jdsuOnmsiAlarmResendEventsExecute
OBJECT-TYPE
Setting this field to 1 performs the trap resend
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.5.2INTEGERread-writecurrent
jdsuOnmsiAlarmResendEventsError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.5.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmResynchronize
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.6
jdsuOnmsiAlarmResynchronizeExecute
OBJECT-TYPE
Setting this field to 1 performs the alarm resynchronization
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.6.1INTEGERread-writecurrent
jdsuOnmsiAlarmResynchronizeError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.6.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiAlarmSplitterPeakLoad
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.7
jdsuOnmsiAlarmSplitterPeakLoadParamEventInternalKey
OBJECT-TYPE
The internal key of the event for which the splitter peak should be loaded
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.7.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiAlarmSplitterPeakLoadExecute
OBJECT-TYPE
Setting this field to 1 performs the splitter peak table load
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.7.2INTEGERread-writecurrent
jdsuOnmsiAlarmSplitterPeakLoadError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.6.2.7.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuService
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.7
jdsuOnmsiOtuData
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.7.1
jdsuOnmsiOtuTable
OBJECT-TYPE
This table contains the standard OTU data
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1not-accessiblecurrent
jdsuOnmsiOtuEntry
OBJECT-TYPE
An OTU entry
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1not-accessiblecurrent
jdsuOnmsiOtuEntryInternalKey
OBJECT-TYPE
The internal key of the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuEntryName
OBJECT-TYPE
The name of the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuEntryDescription
OBJECT-TYPE
The description of the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuEntryIpAddress
OBJECT-TYPE
The IP address of hostname of the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuEntryDeviceName
OBJECT-TYPE
The device name of the OTU ('OTU 8000', 'OTU 8000E', ...)
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.5DisplayStringread-onlycurrent
jdsuOnmsiOtuEntrySerialNumber
OBJECT-TYPE
The serial number of the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.6DisplayStringread-onlycurrent
jdsuOnmsiOtuEntrySoftwareVersion
OBJECT-TYPE
The software version of the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.7DisplayStringread-onlycurrent
jdsuOnmsiOtuEntryCentralOfficeInternalKey
OBJECT-TYPE
The internal key of the central office associated to the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.8JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuEntrySeverity
OBJECT-TYPE
The current severity of the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.1.1.9JdsuOnmsiSeverityread-onlycurrent
jdsuOnmsiOtuAdditionalAttributeTable
OBJECT-TYPE
This table contains the additional attributes on OTUs
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.2not-accessiblecurrent
jdsuOnmsiOtuAdditionalAttributeEntry
OBJECT-TYPE
An OTU additional attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.2.1not-accessiblecurrent
jdsuOnmsiOtuAdditionalAttributeEntryInternalKey
OBJECT-TYPE
The internal key of the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.2.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuAdditionalAttributeEntryName
OBJECT-TYPE
The additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.2.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuAdditionalAttributeEntryValue
OBJECT-TYPE
The additional attribute value
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuAttributeTable
OBJECT-TYPE
This table contains the descriptions of noticeable OTU attributes
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.3not-accessiblecurrent
jdsuOnmsiOtuAttributeEntry
OBJECT-TYPE
An OTU attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.3.1not-accessiblecurrent
jdsuOnmsiOtuAttributeEntryName
OBJECT-TYPE
The attribute name. The additional attributes are prefixed with an underscore character to avoid name collision with standard attributes
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.3.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuAttributeEntryAdditional
OBJECT-TYPE
This flag indicates whether the attribute is additional
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.3.1.2TruthValueread-onlycurrent
jdsuOnmsiOtuAttributeEntryFindable
OBJECT-TYPE
This flag indicates whether the attribute is findable
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.3.1.3TruthValueread-onlycurrent
jdsuOnmsiOtuAttributeEntryUpdatable
OBJECT-TYPE
This flag indicates whether the attribute is updatable
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.3.1.4TruthValueread-onlycurrent
jdsuOnmsiOtuOtdrTable
OBJECT-TYPE
This table contains the data on the OTDR modules of OTUs
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.4not-accessiblecurrent
jdsuOnmsiOtuOtdrEntry
OBJECT-TYPE
An OTDR module entry
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.4.1not-accessiblecurrent
jdsuOnmsiOtuOtdrEntryInternalKey
OBJECT-TYPE
The internal key of the OTDR module
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.4.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuOtdrEntryOtuInternalKey
OBJECT-TYPE
The internal key of the OTU to which the OTDR module belongs
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.4.1.2JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuOtdrEntryPosition
OBJECT-TYPE
The position of the OTDR module in the OTU, as a JdsuOnmsiOtdrPosition: 1: top 2: bottom
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.4.1.3JdsuOnmsiOtdrPositionread-onlycurrent
jdsuOnmsiOtuOtdrEntryType
OBJECT-TYPE
The type of OTDR module (ex: '8117R VLR')
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.4.1.4DisplayStringread-onlycurrent
jdsuOnmsiOtuOtdrEntrySerialNumber
OBJECT-TYPE
The serial number of the OTDR module
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.4.1.5DisplayStringread-onlycurrent
jdsuOnmsiOtuOtdrEntryWavelengths
OBJECT-TYPE
The list of wavelengths supported by the OTDR module (ex: '1550, 1625')
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.4.1.6DisplayStringread-onlycurrent
jdsuOnmsiOtuSwitchTable
OBJECT-TYPE
This table contains the data on the switches of OTUs
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5not-accessiblecurrent
jdsuOnmsiOtuSwitchEntry
OBJECT-TYPE
A switch entry
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5.1not-accessiblecurrent
jdsuOnmsiOtuSwitchEntryInternalKey
OBJECT-TYPE
The internal key of the switch
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuSwitchEntryOtuInternalKey
OBJECT-TYPE
The internal key of the OTU to which the switch belongs
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5.1.2JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuSwitchEntryName
OBJECT-TYPE
The name of the switch
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuSwitchEntryRemote
OBJECT-TYPE
This flag indicates whether the switch is remote
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5.1.4TruthValueread-onlycurrent
jdsuOnmsiOtuSwitchEntryPosition
OBJECT-TYPE
The position of the switch in the OTU
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5.1.5INTEGERread-onlycurrent
jdsuOnmsiOtuSwitchEntryInputs
OBJECT-TYPE
The switch input count
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5.1.6INTEGERread-onlycurrent
jdsuOnmsiOtuSwitchEntryOutputs
OBJECT-TYPE
The switch output count
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.5.1.7INTEGERread-onlycurrent
jdsuOnmsiOtuPortTable
OBJECT-TYPE
This table contains the data on the ports of OTUs
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.6not-accessiblecurrent
jdsuOnmsiOtuPortEntry
OBJECT-TYPE
A port entry
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.6.1not-accessiblecurrent
jdsuOnmsiOtuPortEntryInternalKey
OBJECT-TYPE
The internal key of the OTU to which the port belongs
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.6.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuPortEntryOtuInternalKey
OBJECT-TYPE
The internal key of the OTU to which the port belongs
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.6.1.2JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuPortEntryModuleInternalKey
OBJECT-TYPE
The internal key of the module (which may be a jdsuOnmsiOtuSwitchEntryInternalKey or a jdsuOnmsiOtuOtdrEntryInternalKey) to which the port belongs.
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.6.1.3JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuPortEntryPosition
OBJECT-TYPE
The output number of the port
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.6.1.4INTEGERread-onlycurrent
jdsuOnmsiOtuPortEntryPonInternalKey
OBJECT-TYPE
The internal key of the PON associated to the port
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.6.1.5JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuPortEntryLinkInternalKey
OBJECT-TYPE
The internal key of the link associated to the port
1.3.6.1.4.1.35873.5.1.1.1.3.7.1.6.1.6JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiOtuFunctions
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.7.2
jdsuOnmsiOtuGet
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.1
jdsuOnmsiOtuGetParamInternalKey
OBJECT-TYPE
The internal key of the OTU to retrieve
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.1.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiOtuGetExecute
OBJECT-TYPE
Setting this field to 1 performs the OTU retrieval
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.1.2INTEGERread-writecurrent
jdsuOnmsiOtuGetError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuFind
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.2
jdsuOnmsiOtuFindParamAttribute
OBJECT-TYPE
The name of the OTU attribute to perform the search on. Valid attributes are : - name - ipAddress - serialNumber - centralOfficeInternalKey and any additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.2.1JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiOtuFindParamValue
OBJECT-TYPE
The attribute value to find
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.2.2JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiOtuFindExecute
OBJECT-TYPE
Setting this field to 1 performs the OTU find
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.2.3INTEGERread-writecurrent
jdsuOnmsiOtuFindError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.2.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuAttributeLoad
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.3
jdsuOnmsiOtuAttributeLoadExecute
OBJECT-TYPE
Setting this field to 1 performs the jdsuOnmsiOtuAttributeTable load
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.3.1INTEGERread-writecurrent
jdsuOnmsiOtuAttributeLoadError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.3.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiOtuGetPorts
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.4
jdsuOnmsiOtuGetPortsParamInternalKey
OBJECT-TYPE
The internal key of the OTU to retrieve ports from
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.4.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiOtuGetPortsExecute
OBJECT-TYPE
Setting this field to 1 performs the port retrieval
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.4.2INTEGERread-writecurrent
jdsuOnmsiOtuGetPortsError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.7.2.4.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiCentralOfficeService
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.8
jdsuOnmsiCentralOfficeData
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.8.1
jdsuOnmsiCentralOfficeTable
OBJECT-TYPE
This table contains the standard central office data
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.1not-accessiblecurrent
jdsuOnmsiCentralOfficeEntry
OBJECT-TYPE
A central office entry
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.1.1not-accessiblecurrent
jdsuOnmsiCentralOfficeEntryInternalKey
OBJECT-TYPE
The internal key of the central office
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.1.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiCentralOfficeEntryName
OBJECT-TYPE
The name of the central office
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.1.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiCentralOfficeEntryDescription
OBJECT-TYPE
The description of the central office
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.1.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiCentralOfficeAdditionalAttributeTable
OBJECT-TYPE
This table contains the additional attributes on central offices
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.2not-accessiblecurrent
jdsuOnmsiCentralOfficeAdditionalAttributeEntry
OBJECT-TYPE
A central office additional attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.2.1not-accessiblecurrent
jdsuOnmsiCentralOfficeAdditionalAttributeEntryInternalKey
OBJECT-TYPE
The internal key of the central office
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.2.1.1JdsuOnmsiInternalKeyread-onlycurrent
jdsuOnmsiCentralOfficeAdditionalAttributeEntryName
OBJECT-TYPE
The additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.2.1.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiCentralOfficeAdditionalAttributeEntryValue
OBJECT-TYPE
The additional attribute value
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiCentralOfficeAttributeTable
OBJECT-TYPE
This table contains the descriptions of noticeable central office attributes
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.3not-accessiblecurrent
jdsuOnmsiCentralOfficeAttributeEntry
OBJECT-TYPE
A central office attribute entry
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.3.1not-accessiblecurrent
jdsuOnmsiCentralOfficeAttributeEntryName
OBJECT-TYPE
The attribute name. The additional attributes are prefixed with an underscore character to avoid name collision with standard attributes
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.3.1.1JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiCentralOfficeAttributeEntryAdditional
OBJECT-TYPE
This flag indicates whether the attribute is additional
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.3.1.2TruthValueread-onlycurrent
jdsuOnmsiCentralOfficeAttributeEntryFindable
OBJECT-TYPE
This flag indicates whether the attribute is findable
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.3.1.3TruthValueread-onlycurrent
jdsuOnmsiCentralOfficeAttributeEntryUpdatable
OBJECT-TYPE
This flag indicates whether the attribute is updatable
1.3.6.1.4.1.35873.5.1.1.1.3.8.1.3.1.4TruthValueread-onlycurrent
jdsuOnmsiCentralOfficeFunctions
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.8.2
jdsuOnmsiCentralOfficeGet
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.1
jdsuOnmsiCentralOfficeGetParamInternalKey
OBJECT-TYPE
The internal key of the central office to retrieve
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.1.1JdsuOnmsiInternalKeyread-writecurrent
jdsuOnmsiCentralOfficeGetExecute
OBJECT-TYPE
Setting this field to 1 performs the central office retrieval
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.1.2INTEGERread-writecurrent
jdsuOnmsiCentralOfficeGetError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.1.3JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiCentralOfficeFind
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.2
jdsuOnmsiCentralOfficeFindParamAttribute
OBJECT-TYPE
The attribute of the central office to perform the search on. Valid attributes for central offices are : - name and any additional attribute name
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.2.1JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiCentralOfficeFindParamValue
OBJECT-TYPE
The attribute value to find
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.2.2JdsuOnmsiUtf8Stringread-writecurrent
jdsuOnmsiCentralOfficeFindExecute
OBJECT-TYPE
Setting this field to 1 performs the central office find
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.2.3INTEGERread-writecurrent
jdsuOnmsiCentralOfficeFindError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.2.4JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiCentralOfficeAttributeLoad
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.3
jdsuOnmsiCentralOfficeAttributeLoadExecute
OBJECT-TYPE
Setting this field to 1 performs the jdsuOnmsiCentralOfficeAttributeTable load
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.3.1INTEGERread-writecurrent
jdsuOnmsiCentralOfficeAttributeLoadError
OBJECT-TYPE
When the function execution fails, this node contains information on the error that occurred. This node is empty when the execution is successful.
1.3.6.1.4.1.35873.5.1.1.1.3.8.2.3.2JdsuOnmsiUtf8Stringread-onlycurrent
jdsuOnmsiEvents
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.4
jdsuOnmsiConf
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.5
jdsOnmsiAdministrationConfGroups
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.5.2
jdsuOnmsiServicesConfGroups
OBJECT-IDENTITY
1.3.6.1.4.1.35873.5.1.1.1.5.3

Notifications

NameOIDStatus
jdsuOnmsiImAliveTrap
NOTIFICATION-TYPE
This trap is send periodically, to ensure the managers that the application is running. Period and text can be configured under jdsuOnmsiAdministration/jdsuOnmsiImAlive. This trap contains the current alarm event sequence, to help managers in detecting missed jdsuOnmsiAlarmEventTrap
1.3.6.1.4.1.35873.5.1.1.1.4.1current
jdsuOnmsiHomeTestResultTrap
NOTIFICATION-TYPE
This trap is send after a home test is started with jdsuOnmsiHomeStartTest function.
1.3.6.1.4.1.35873.5.1.1.1.4.2current
jdsuOnmsiPonTestResultTrap
NOTIFICATION-TYPE
This trap is send after a PON test is started with jdsuOnmsiPonStartTest function.
1.3.6.1.4.1.35873.5.1.1.1.4.3current
jdsuOnmsiMonitoringTestResultTrap
NOTIFICATION-TYPE
This trap is send after a monitoring test is started with jdsuOnmsiMonitoringTestStartTest function.
1.3.6.1.4.1.35873.5.1.1.1.4.4current
jdsuOnmsiAlarmEventTrap
NOTIFICATION-TYPE
This trap is send asynchronously, when alarm events occurs on the ONMSi system. When an alarm event pass the notification filter defined for the SNMP user (community), a sequence number is associated to the alarm event per SNMP user, and a trap is sent.
1.3.6.1.4.1.35873.5.1.1.1.4.5current

Conformance

NameOIDStatus
jdsuOnmsiProductGroups
OBJECT-GROUP
Conformance for jdsuOnmsiProduct
1.3.6.1.4.1.35873.5.1.1.1.5.1current
jdsuOnmsiSnmpConfigConfGroup
OBJECT-GROUP
Conformance for jdsuOnmsiSnmpConfig
1.3.6.1.4.1.35873.5.1.1.1.5.2.1current
jdsuOnmsiImAliveConfGroup
OBJECT-GROUP
Conformance for jdsuOnmsiImAlive
1.3.6.1.4.1.35873.5.1.1.1.5.2.2current
jdsuOnmsiHomeTerminationTypeConfGroup
OBJECT-GROUP
Conformance for the jdsuOnmsiHomeTerminationTypeTable nodes
1.3.6.1.4.1.35873.5.1.1.1.5.3.1current
jdsuOnmsiHomeConfGroup
OBJECT-GROUP
Conformance for the jdsuOnmsiHomeService
1.3.6.1.4.1.35873.5.1.1.1.5.3.2current
jdsuOnmsiPonConfGroup
OBJECT-GROUP
Conformance for the jdsuOnmsiPonService
1.3.6.1.4.1.35873.5.1.1.1.5.3.3current
jdsuOnmsiPeakConfGroup
OBJECT-GROUP
Conformance for the jdsuOnmsiPeakService
1.3.6.1.4.1.35873.5.1.1.1.5.3.4current
jdsuOnmsiLinkServiceConfGroup
OBJECT-GROUP
Conformance for the jdsuOnmsiLinkService
1.3.6.1.4.1.35873.5.1.1.1.5.3.5current
jdsuOnmsiMonitoringTestServiceConfGroup
OBJECT-GROUP
Conformance for the jdsuOnmsiMonitoringTestService
1.3.6.1.4.1.35873.5.1.1.1.5.3.6current
jdsuOnmsiAlarmServiceConfGroup
OBJECT-GROUP
Conformance for the jdsuOnmsiAlarmService
1.3.6.1.4.1.35873.5.1.1.1.5.3.7current
jdsuOnmsiOtuConfGroup
OBJECT-GROUP
Conformance for the jdsuOnmsiOtuService
1.3.6.1.4.1.35873.5.1.1.1.5.3.8current
jdsuOnmsiCentralOfficeConfGroup
OBJECT-GROUP
1.3.6.1.4.1.35873.5.1.1.1.5.3.9current
jdsuOnmsiEventsConfGroup
NOTIFICATION-GROUP
Conformance for jdsuOnmsiEvents
1.3.6.1.4.1.35873.5.1.1.1.5.4current