IPO-PHONES-MIB
- Registered at
- 1.3.6.1.4.1.6889.2.2.1.1.1
- Last updated
- 2011-02-09 15:21
- Organization
- Avaya Inc.
- Revisions
- 2011-02-09 15:21, 2009-02-18 13:09, 2008-06-12 15:06, 2008-04-17 16:30, 2007-03-28 12:09, 2007-02-24 12:09, 2006-06-29 00:00, 2006-01-31 00:00, 2005-11-22 00:00, 2005-07-21 10:50, 2005-07-21 10:30, 2005-03-04 00:00, 2005-01-06 00:00, 2004-12-20 00:00, 2004-03-03 00:00, 2003-10-10 00:00
- Namespace
- avaya
- Source file
IPO-PHONES-MIB- Digest
sha256:51517bc951f8a4d25e59409a06f4e8c4af7d6200b8e618c0868c2ed162876ae0
Description
Avaya IP Office Phones MIB The MIB module for representing the phones present on a Avaya IP Office stack.
Contact
Avaya Customer Services Postal: Avaya, Inc. 211 Mt Airy Rd. Basking Ridge, NJ 07920 USA Tel: +1 908 953 6000 WWW: http://www.avaya.com
Imports
| From | Symbols |
|---|---|
| DIFFSERV-MIB | IndexInteger |
| IPO-MIB | ipoGTEventDateTime, ipoGTEventDevID, ipoGTEventEntityName, ipoGTEventSeverity, ipoGTEventStdSeverity, ipoGenMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysDescr |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
AVAYAGEN-MIB DIFFSERV-DSCP-TC DIFFSERV-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB INTEGRATED-SERVICES-MIB IPO-MIB IPO-PHONES-MIB ITU-ALARM-TC-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PhoneType TEXTUAL-CONVENTION This data type is used as the syntax of the ipoPhoneType object in the ipoPhonesTable. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ipoPhonesMibNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6889.2.2.1.1.1.0 | |||
| ipoPhonesMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6889.2.2.1.1.1.1 | |||
| ipoPhones OBJECT-IDENTITY | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1 | |||
| ipoPhonesNumber OBJECT-TYPE The number of phone interfaces (regardless of their current state) present on this system. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.1 | Integer32 | read-only | current |
| ipoPhonesTable OBJECT-TYPE A list of phone entries. The number of entries is given by the value of ipoPhonesNumber. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2 | not-accessible | current | |
| ipoPhonesEntry OBJECT-TYPE An entry containing management information applicable to a particular IP Office phone. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1 | not-accessible | current | |
| ipoPhonesIndex OBJECT-TYPE A unique value, greater than zero, for each phone. It is recommended that values are assigned contiguously starting from 1. The value for each phone sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.1 | IndexInteger | read-only | current |
| ipoPhonesExtID OBJECT-TYPE The numerical logical extension entity identifier assigned to the phone on the IP Office entity. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.2 | Integer32 | read-only | current |
| ipoPhonesExtNumber OBJECT-TYPE The number that should be dialed to reach this phone on the IP Office entity. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.3 | Integer32 | read-only | current |
| ipoPhonesUserShort OBJECT-TYPE The short form of the name of the user of this phone which is used in caller display. This is quite often the forename of the user. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.4 | DisplayString (SIZE(0..15)) | read-only | current |
| ipoPhonesUserLong OBJECT-TYPE The long form of the name of the user of this phone. This is normally the full name (forename and surname) of the user. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.5 | DisplayString (SIZE(0..31)) | read-only | current |
| ipoPhonesType OBJECT-TYPE The type of phone that is connected to this IP Office logical phone extension. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.6 | PhoneType | read-only | current |
| ipoPhonesPort OBJECT-TYPE A reference, by entPhysicalIndex value, to the EntPhysicalEntry representing the physical port entity that this phone entry is associated with in an entity MIB instantiation within the IP Office agent. If no MIB definitions specific to the particular media are available, or the entry is for a IP phone which may not be connected to a physical port on the IP Office, the value should be set to the value 0. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.7 | Unsigned32 | read-only | current |
| ipoPhonesPortNumber OBJECT-TYPE The port number on the module that the operator uses to identify the port. The port numbers on the expansion modules will follow standard numbering, beginning at 1 and incrementing until the last port. The phone ports on the base units, however, are numbered according to how they are collected into 'banks' on the unit. IP Office IP500 The entire front of the product consists of 4 plug-in modules. Each module has its own numbering from 1..12. So from the left: 101..112, 201..212, etc. IP Office IP412 There is no way to plug phones into the unit, so only expansion modules should be present. IP Office IP406v2 The leftmost bank of ports are Digital (DS/DT) and labeled as 1-8 on the product, and so are labelled ports 101..108 in the mib. The next bank of ports are Analogue and labeled as 1-2 on the product and so are labelled ports 201..202 in the mib. The next bank of phones are LAN and labeled as 1-8 on the product. Not phones, so not in this mib. IP Office Small Office Edition The leftmost bank of 4 ports are Trunk ports, and so are not available in this mib. The next bank of 8 ports are Digital (DS/DT), and so are labelled ports 101..108 in the mib. The next bank of 4 ports are Analogue, and so are labelled ports 201..204 in the mib. The next bank of ports are LAN, and so are not available in this mib. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.8 | Unsigned32 | read-only | current |
| ipoPhonesModuleNumber OBJECT-TYPE The number that the operator uses to identify the module. The module numbers are assigned according to the expansion port number that it's plugged into on the Control unit. Example: Module number '2' = Expansion unit plugged into expansion port 2 on the Control unit. Module number '0' is reserved for the Control unit itself. | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.9 | Unsigned32 | read-only | current |
| ipoPhonesIPAddress OBJECT-TYPE The IP Address of the phone. In network-byte order. In the usual IP Address format - xxx.xxx.xxx.xxx. The IP address will only be present if the phone is an IP phone. If it is not, it will contain zeros (0.0.0.0). | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.10 | IpAddress | read-only | current |
| ipoPhonesPhysAddress OBJECT-TYPE The Physical Address of the phone, such as the MAC Address. The physical address will only be present if the phone is an IP phone. If it is not, it will contain zeros (00.00.00.00.00.00). | 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.11 | PhysAddress | read-only | current |
| ipoPhonesConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6889.2.2.1.1.1.2 | |||
| ipoPhonesCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6889.2.2.1.1.1.2.1 | |||
| ipoPhonesGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6889.2.2.1.1.1.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| ipoPhonesChangeEvent NOTIFICATION-TYPE This notification is generated whenever the type of phone connected to a logical extension entity is detected as having changed after completion of normal start up of the Agent entity. Its purpose is to allow a management application to identify the removal or switching of phone types on the IP Office entity. **NOTE: This notification is deprecated and replaced by ipoPhonesChangeSvcEvent. | 1.3.6.1.4.1.6889.2.2.1.1.1.0.1 | deprecated |
| ipoPhonesChangeSvcEvent NOTIFICATION-TYPE This notification is generated whenever the type of phone connected to a logical extension entity is detected as having changed after completion of normal start up of the Agent entity. Its purpose is to allow a management application to identify the removal or switching of phone types on the IP Office entity. Newer implementations of this MIB should put in place this event in favour of ipoPhonesChangeEvent. | 1.3.6.1.4.1.6889.2.2.1.1.1.0.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ipoPhonesCompliance MODULE-COMPLIANCE The compliance statement for the IP Office Phones MIB | 1.3.6.1.4.1.6889.2.2.1.1.1.2.1.1 | deprecated |
| ipoPhonesv2Compliance MODULE-COMPLIANCE The compliance statement for the IP Office Phones MIB | 1.3.6.1.4.1.6889.2.2.1.1.1.2.1.2 | deprecated |
| ipoPhonesv3Compliance MODULE-COMPLIANCE The compliance statement for the IP Office Phones MIB | 1.3.6.1.4.1.6889.2.2.1.1.1.2.1.3 | current |
| ipoPhonesGroup OBJECT-GROUP The collection of objects which are used to represent IP Office phones, for which a single agent provides management information. | 1.3.6.1.4.1.6889.2.2.1.1.1.2.2.1 | current |
| ipoPhonesNotificationsGroup NOTIFICATION-GROUP The notifications which indicate specific changes in the state of IP Office phones. | 1.3.6.1.4.1.6889.2.2.1.1.1.2.2.2 | deprecated |
| ipoPhonesv2NotificationsGroup NOTIFICATION-GROUP The notifications which indicate specific changes in the state of IP Office phones for newer implementations of this MIB. | 1.3.6.1.4.1.6889.2.2.1.1.1.2.2.3 | current |
| ipoPhones2Group OBJECT-GROUP Additional collection of objects which are used to represent physical information about IP Office phones, for which a single agent provides management information. These objects provide more information on where phones are directly connected to an IP Office and further details on IP Phones for their identification. | 1.3.6.1.4.1.6889.2.2.1.1.1.2.2.4 | current |