IP-MAC-BIND-MIB
- Registered at
- 1.3.6.1.4.1.171.12.23
- Last updated
- 1912-10-26 00:00
- Organization
- D-Link Corp.
- Namespace
- dlink
- Source file
IP-MAC-BIND-MIB- Digest
sha256:5993268a4ec7148052ed86304daf9adaa3600487666c28a074535a44734d1051
Description
The structure of IP-MAC binding management for the proprietary enterprise.
Contact
http://support.dlink.com
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| IPV6-TC | Ipv6Address |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLINK-ID-REC-MIB INET-ADDRESS-MIB IP-MAC-BIND-MIB IPV6-TC SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PortList type | ||||
| VlanId type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| swIpMacBindingCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.23.1 | |||
| swIpMacBindingTrapLogState OBJECT-TYPE When enabled (2), whenever there is a new MAC that violates the pre-defined IP MAC Binding configuration, a trap will be sent out and the relevant information will be logged into the system. | 1.3.6.1.4.1.171.12.23.1.1 | INTEGER {other(1), enable(2), disable(3)} | read-write | current |
| swIpMacBindingACLMode OBJECT-TYPE When enabled (2), the IP-MAC Binding function will use the ACL mode. Note: Supported in IP-MAC binding v3.3 only. | 1.3.6.1.4.1.171.12.23.1.2 | INTEGER {other(1), enable(2), disable(3)} | read-write | current |
| swIpMacBindingRecoveryInterval OBJECT-TYPE Specifies the seconds in which the switch will delete the blocked ARL (Address Resolution Logic) entry in order to relearn the entry. This is a mechanism by which the switch can recover an ARL entry from the blocked state to the normal state. A value of '0' means an infinite state. Note: This object is specific to models that are unable to recover a blocked MAC address without removing the blocked ARL entry and relearning the entry. | 1.3.6.1.4.1.171.12.23.1.3 | INTEGER (0..65535) | read-write | current |
| swIpMacBindingDHCPSnoopState OBJECT-TYPE When the dhcp_snoop function is enabled, all address_binding disabled ports will act as DHCP server ports (the switch will learn IP addresses through DHCP server ports (by DHCP OFFER and DHCP ACK packets)). The auto-learned IP-MAC binding entry will be mapped to a specific source port based on the MAC address learning function. This entry will be created as an ACL-mode binding entry for this specific port. Each entry is associated with a lease time. When the lease time expires, the expired entry will be removed from this port. The automatically learned binding entry can be moved from one port to another port if the DHCP snooping function has learned that the MAC address has moved to a different port. Consider a case where DHCP snooping learns a binding entry, and the same IP-MAC binding entry has been statically configured. Suppose that the learned information is consistent with the statically configured entry, then the automatically learned entry will not be created. Supposing that the entry has been statically configured in ARP mode, since the automatically learned entry will be created in ACL mode, the entry will become an ACL mode entry. Supposing that the entry is statically configured on one port and the entry is automatically learned on another port, then both entries will exist. When the dhcp_snoop function is disabled, all of the automatically learned binding entries will be removed. | 1.3.6.1.4.1.171.12.23.1.4 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingDHCPSnoopEntryClearAllState OBJECT-TYPE Used to clear all the entries created by DHCP packets. | 1.3.6.1.4.1.171.12.23.1.5 | INTEGER {other(1), start(2)} | read-write | current |
| swIpMacBindingARPInspectionState OBJECT-TYPE Used to set the ARP inspection state. | 1.3.6.1.4.1.171.12.23.1.6 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingIPv6DHCPSnoopState OBJECT-TYPE This object indicates the global state of IPv6 DHCP snooping. | 1.3.6.1.4.1.171.12.23.1.7 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingNDSnoopState OBJECT-TYPE This object indicates the global state of ND snooping. | 1.3.6.1.4.1.171.12.23.1.8 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingIPv6DHCPSnoopEntryClearAllState OBJECT-TYPE Used to clear all the entries learned by IPv6 DHCP snooping. | 1.3.6.1.4.1.171.12.23.1.9 | INTEGER {other(1), start(2)} | read-write | current |
| swIpMacBindingNDSnoopEntryClearAllState OBJECT-TYPE Used to clear all the entries learned by ND snooping. | 1.3.6.1.4.1.171.12.23.1.10 | INTEGER {other(1), start(2)} | read-write | current |
| swIpMacBindingRoamingState OBJECT-TYPE This object indicates the global state of IMPB roaming. When IMPB roaming is enabled, the dynamic authenticated MAC address which learned through DHCP/ND snooping on specific port can change to another port if it detects (1) a new DHCP process belong to same IP and MAC address or (2) a new DAD process belong to same IP and MAC. When disable the IMPB roaming, the DHCP or ND entry cannot be roaming | 1.3.6.1.4.1.171.12.23.1.11 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingAutosaveState OBJECT-TYPE This object indicates the global state of the DHCPv4 Snooping binding entries autosave. By default, the autosave state of the DHCPv4 Snooping binding entries is enabled. When the autosave state is enabled, the device will back up the DHCPv4 Snooping binding entries in the specified backup path every 60 minutes and read the back up database after the switch reboot.The DHCP Snooping will rebuild the binding entry base on the back up database file. You must not change the back up database file, otherwise it will lead to rebuild failed. Note£ºThis feature only supports on the device that supports of external memory (e.g. SD card) | 1.3.6.1.4.1.171.12.23.1.12 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingAutosaveFileName OBJECT-TYPE The path name specifies the path of the file to be auto saving. By default, the filename is ¡°dhcpsnp.cfg¡±. | 1.3.6.1.4.1.171.12.23.1.13 | DisplayString (SIZE(1..64)) | read-write | current |
| swIpMacBindingSaveActivity OBJECT-TYPE When this object is set to start(2), the device will begin saving DHCPv4 snooping bindind entries immediately. | 1.3.6.1.4.1.171.12.23.1.14 | INTEGER {none(1), start(2)} | read-write | current |
| swIpMacBindingAutoRecoverTime OBJECT-TYPE Automatically recover port from shutdown state when the auto recover timer timeout. Note: The max entry range is (60..1000000)seconds. The value -1 means infinite to shutdown and never recover the port shutdown state. | 1.3.6.1.4.1.171.12.23.1.15 | INTEGER | read-write | current |
| swIpMacBindingInfo OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.23.2 | |||
| swIpMacBindingPortMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.23.3 | |||
| swIpMacBindingAllPortState OBJECT-TYPE This object enables/disables IP-MAC binding on all the system ports. This action is only applicable when users have write privileges, and can only be viewed when users have read privileges. Note: enable-strict (2): This means strict mode (SW learning). In this mode all packets will be sent to the CPU. The user can choose if the port will check the ARP packets and IP packets of the IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC address will be set as a dynamic learned or blocked entry, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses , the port will directly learn MAC addresses on non-ARP and non-IP broadcast packets, so these packets will be bypassed. However, if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checks, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped. | 1.3.6.1.4.1.171.12.23.3.1 | INTEGER {other(1), enable-strict(2), disable(3), enable-loose(4)} | read-write | current |
| swIpMacBindingPortTable OBJECT-TYPE The table specifies the IP-MAC binding function of a specified port. | 1.3.6.1.4.1.171.12.23.3.2 | not-accessible | current | |
| swIpMacBindingPortEntry OBJECT-TYPE A list containing information about the IP-MAC binding function of a port. | 1.3.6.1.4.1.171.12.23.3.2.1 | not-accessible | current | |
| swIpMacBindingPortIndex OBJECT-TYPE This object indicates the module's port number. (1..Max port number in the module). | 1.3.6.1.4.1.171.12.23.3.2.1.1 | INTEGER (0..65535) | read-only | current |
| swIpMacBindingPortState OBJECT-TYPE This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by the IP-MAC-PORT Binding entries. If the MAC address can or cannot be found by the entry, the MAC will be set as a dynamic learned or blocked entry, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. However, if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checks, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped. | 1.3.6.1.4.1.171.12.23.3.2.1.2 | INTEGER {other(1), enable-strict(2), disable(3), enable-loose(4)} | read-write | current |
| swIpMacBindingPortZeroIPState OBJECT-TYPE Specifies whether to allow ARP packets with the SIP address 0.0.0.0, regardless of whether the IP address 0.0.0.0 is set in the binding list or not. When set to enable, the ARP packets with the SIP address 0.0.0.0 will be allowed. When set to disable, ARP packets with the SIP address 0.0.0.0 will be dropped. Note: This option does not affect the IP-MAC-Port binding ACL Mode. | 1.3.6.1.4.1.171.12.23.3.2.1.3 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingPortForwardDhcpPkt OBJECT-TYPE This object can be set to forward DHCP packets or not forward DHCP packets on the specified port. | 1.3.6.1.4.1.171.12.23.3.2.1.4 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingPortDHCPSnoopMaxEntry OBJECT-TYPE This object indicates the max entry created by DHCP packets on the specified port. Note: The max entry range is (0..N), the N value indicates the maximum number, which is determined by the project itself. When 0 is set on the specified port, there is no limit on the maximum number of entries that can be created by DHCP packets . | 1.3.6.1.4.1.171.12.23.3.2.1.5 | INTEGER | read-write | current |
| swIpMacBindingPortDHCPSnoopEntryClearAction OBJECT-TYPE When set to start (2), the address binding entries learned for the specified ports will be cleared. When get, it always returns other (1). | 1.3.6.1.4.1.171.12.23.3.2.1.6 | INTEGER {other(1), start(2)} | read-write | current |
| swIpMacBindingPortMode OBJECT-TYPE The mode of this entry. arp: This entry is specified as an ARP mode entry, and this entry will not be added as an access entry. If this object is not specified, the mode defaults to ARP mode. If the system is in ARP mode, the ARP mode entries and ACL mode entries will be effective. If the system is in ACL mode, only the ACL mode entries will be active. acl: This entry is specified as an ACL mode entry. If the user enables the ACL mode, this entry will be added as an access entry. | 1.3.6.1.4.1.171.12.23.3.2.1.7 | INTEGER {arp(1), acl(2)} | read-write | current |
| swIpMacBindingPortStopLearningThreshold OBJECT-TYPE This object indicates the threshold to stop learning new MAC addresses on the specified port. When the number of blocked entries exceeds the threshold, the port will stop learning new addresses. The packet with new addresses will be dropped. Note: When 0 is set on the specified port, it means no limit. | 1.3.6.1.4.1.171.12.23.3.2.1.8 | INTEGER | read-write | current |
| swIpMacBindingPortRecoverLearning OBJECT-TYPE When set to start (2), it will change from the stop_learning state to the normal state on the specified port. When get, it always returns other (1). | 1.3.6.1.4.1.171.12.23.3.2.1.9 | INTEGER {other(1), start(2)} | read-write | current |
| swIpMacBindingPortLearningStatus OBJECT-TYPE This object indicates the learning status of a port. When the status is stop (2), the port will stop learning new addresses and the packets with new addresses will be dropped. | 1.3.6.1.4.1.171.12.23.3.2.1.10 | INTEGER {normal(1), stop(2)} | read-only | current |
| swIpMacBindingPortIPv6State OBJECT-TYPE This object enables/disables IPv6 IP-MAC binding on the specified port. | 1.3.6.1.4.1.171.12.23.3.2.1.11 | INTEGER {other(1), enabled(2), disabled(3)} | read-write | current |
| swIpMacBindingPortIPv6DHCPSnoopMaxEntry OBJECT-TYPE This object indicates the maximum number of entries that can be learned by IPv6 DHCP snooping on the specified port. Note: The maximum entry range is (0..N), the N value indicates the maximum number, which is determined by the project itself. When 0 is set on the specified port, there is no limit on the number of maximum entries that can be learned by DHCP snooping. | 1.3.6.1.4.1.171.12.23.3.2.1.12 | INTEGER | read-write | current |
| swIpMacBindingPortNDSnoopMaxEntry OBJECT-TYPE This object indicates the maximum number of entries that can be learned by ND snooping on the specified port. Note: The maximum entry range is (0..N), the N value indicates the maximum number, which is determined by the project itself. When 0 is set on the specified port, there is no limit on the maximum number of entries that can be learned by ND snooping is no limit. | 1.3.6.1.4.1.171.12.23.3.2.1.13 | INTEGER | read-write | current |
| swIpMacBindingPortIPv6DHCPSnoopEntryClearAction OBJECT-TYPE When set to start (2), the address binding entries learned by IPv6 DHCP snooping on the specified ports will be cleared. When get, it always returns other (1). | 1.3.6.1.4.1.171.12.23.3.2.1.14 | INTEGER {other(1), start(2)} | read-write | current |
| swIpMacBindingPortNDSnoopEntryClearAction OBJECT-TYPE When set to start (2), the address binding entries learnt by ND snooping on the specified ports will be cleared. When get, it always returns other (1). | 1.3.6.1.4.1.171.12.23.3.2.1.15 | INTEGER {other(1), start(2)} | read-write | current |
| swIpMacBindingPortARPInspection OBJECT-TYPE This object used to set ARP inspection state on the specified port. When ARP inspection is enabled on the port, the legal ARP packets will be forward, while the illegal packets will be dropped. strict : In this mode, all packets are dropped by default until a legal ARP or broadcast IP packets are detected. loose: In this mode, all packets are forwarded by default until an illegal ARP or broadcast IP packets are detected. | 1.3.6.1.4.1.171.12.23.3.2.1.16 | INTEGER {disabled(1), strict(2), loose(3)} | read-write | current |
| swIpMacBindingPortIPInspection OBJECT-TYPE This object used to set the IP inspection state on the specified port. When IP inspection is enabled on the port, the legal IP packets will be forwarded, while the illegal IP packets will be dropped. | 1.3.6.1.4.1.171.12.23.3.2.1.17 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingPortIPProtocol OBJECT-TYPE This object is used to set which kind of IP packets need to be checked by IP-MAC-PORT binding on the specified port. ipv4: Only IPv4 packets will be checked. ipv6: Only IPv6 packets will be checked. all: Both IPv4 and IPv6 packets will be checked. | 1.3.6.1.4.1.171.12.23.3.2.1.18 | INTEGER {all(1), ipv4(2), ipv6(3)} | read-write | current |
| swIpMacBindingPortNDInspection OBJECT-TYPE This object used to set ND inspection state on the specified port. When ND inspection is enabled on the port, the legal ND packets will be forward, while the illegal packets will be dropped. | 1.3.6.1.4.1.171.12.23.3.2.1.19 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swIpMacBindingPortLimitRateValue OBJECT-TYPE This object is the threshold at which the specified limit rate will turn on. Note: The max entry range is (1..2048)pps. The value -1 means not limit the dhcp packet to cpu. | 1.3.6.1.4.1.171.12.23.3.2.1.20 | INTEGER | read-write | current |
| swIpMacBindingPortLimitRateAction OBJECT-TYPE There are two actions to take for limit rate, drop and shutdown drop:discards dhcp packets that exceed the limit rate value shutdown:shutdown the port when the dhcp packet rate value specified for limit rate is reached. | 1.3.6.1.4.1.171.12.23.3.2.1.21 | INTEGER {drop(1), shutdown(2)} | read-write | current |
| swIpMacBindingMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.23.4 | |||
| swIpMacBindingTable OBJECT-TYPE This table specifies the IP-MAC binding information. | 1.3.6.1.4.1.171.12.23.4.1 | not-accessible | current | |
| swIpMacBindingEntry OBJECT-TYPE The IP-MAC binding entry used to add/delete/configure the address pair of the switch's authorized user database. | 1.3.6.1.4.1.171.12.23.4.1.1 | not-accessible | current | |
| swIpMacBindingIpIndex OBJECT-TYPE The IP address of the IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.1.1.1 | IpAddress | read-only | current |
| swIpMacBindingMac OBJECT-TYPE The MAC address of the IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.1.1.2 | MacAddress | read-create | current |
| swIpMacBindingStatus OBJECT-TYPE The status of this entry. | 1.3.6.1.4.1.171.12.23.4.1.1.3 | RowStatus | read-create | current |
| swIpMacBindingPorts OBJECT-TYPE The port members of this entry. | 1.3.6.1.4.1.171.12.23.4.1.1.4 | PortList | read-create | current |
| swIpMacBindingAction OBJECT-TYPE The action of this entry. Note: Supported in IP-MAC binding v3.5 and the earlier versions. | 1.3.6.1.4.1.171.12.23.4.1.1.5 | INTEGER {inactive(1), active(2)} | read-only | current |
| swIpMacBindingMode OBJECT-TYPE The mode of this entry. arp: This entry is specified as an ARP mode entry, and this entry will not be added as an access entry. If this object is not specified, the mode defaults to ARP mode. If the system is in ARP mode, the ARP mode entries and ACL mode entries will be effective. If the system is in ACL mode, only the ACL mode entries will be active.(Note: Supported on IP-MAC binding v3.5 and the earlier version.) acl: This entry is specified as an ACL mode entry. If the user enables the ACL mode, this entry will be added as an access entry. (Note: Supported in IP-MAC binding v3.3 only). dhcp-snooping: This mode cannot be configured, and when the dhcp-snooping mode is employed, it means that this entry has been learned by DHCP snooping. static: This entry is manually configured. | 1.3.6.1.4.1.171.12.23.4.1.1.6 | INTEGER {arp(1), acl(2), dhcp-snooping(3), static(4)} | read-create | current |
| swIpMacBindingAclStatus OBJECT-TYPE This object indicates the ACL status of this entry. | 1.3.6.1.4.1.171.12.23.4.1.1.7 | INTEGER {inactive(1), active(2)} | read-only | current |
| swIpMacBindingBlockedTable OBJECT-TYPE This table displays information regarding the blocked MAC addresses. | 1.3.6.1.4.1.171.12.23.4.2 | not-accessible | current | |
| swIpMacBindingBlockedEntry OBJECT-TYPE The entry cannot be created or configured. It can only be deleted. | 1.3.6.1.4.1.171.12.23.4.2.1 | not-accessible | current | |
| swIpMacBindingBlockedVID OBJECT-TYPE This object specifies the VLAN ID. | 1.3.6.1.4.1.171.12.23.4.2.1.1 | VlanId | read-only | current |
| swIpMacBindingBlockedMac OBJECT-TYPE The MAC address that was blocked. | 1.3.6.1.4.1.171.12.23.4.2.1.2 | MacAddress | read-only | current |
| swIpMacBindingBlockedVlanName OBJECT-TYPE This object specifies the VLAN name. | 1.3.6.1.4.1.171.12.23.4.2.1.3 | DisplayString | read-only | current |
| swIpMacBindingBlockedPort OBJECT-TYPE The port that the MAC is associated with. | 1.3.6.1.4.1.171.12.23.4.2.1.4 | INTEGER (0..65535) | read-only | current |
| swIpMacBindingBlockedType OBJECT-TYPE The value is always blockByAddrBind. This entry will be deleted when the value is set to 'delete'. | 1.3.6.1.4.1.171.12.23.4.2.1.5 | INTEGER {other(1), blockByAddrBind(2), delete(3)} | read-write | obsolete |
| swIpMacBindingBlockedTime OBJECT-TYPE This object specifies the last time that this entry was generated. | 1.3.6.1.4.1.171.12.23.4.2.1.6 | DateAndTime | read-only | current |
| swIpMacBindingBlockedStatus OBJECT-TYPE The status of this entry. Currently only the destroy (6) option can be used to delete this entry. | 1.3.6.1.4.1.171.12.23.4.2.1.7 | RowStatus | read-create | current |
| swIpMacBindingDHCPSnoopTable OBJECT-TYPE The table specifies information regarding the IP-MAC binding entries that were learned by the DHCP snooping function. | 1.3.6.1.4.1.171.12.23.4.3 | not-accessible | current | |
| swIpMacBindingDHCPSnoopEntry OBJECT-TYPE A list containing information about the DHCP snooping learning IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.3.1 | not-accessible | current | |
| swIpMacBindingDHCPSnoopIpIndex OBJECT-TYPE The IP address of this entry. | 1.3.6.1.4.1.171.12.23.4.3.1.1 | IpAddress | read-only | current |
| swIpMacBindingDHCPSnoopMac OBJECT-TYPE The MAC address of this entry. | 1.3.6.1.4.1.171.12.23.4.3.1.2 | MacAddress | read-only | current |
| swIpMacBindingDHCPSnoopLeaseTime OBJECT-TYPE Specifies the lease time of this entry. When the lease time expires, this entry will be removed from this port. | 1.3.6.1.4.1.171.12.23.4.3.1.3 | INTEGER | read-only | current |
| swIpMacBindingDHCPSnoopPort OBJECT-TYPE Specifies the port of this entry. | 1.3.6.1.4.1.171.12.23.4.3.1.4 | INTEGER | read-only | current |
| swIpMacBindingDHCPSnoopStatus OBJECT-TYPE Specifies the status (inactive or active) of this entry. | 1.3.6.1.4.1.171.12.23.4.3.1.5 | INTEGER {inactive(1), active(2)} | read-only | current |
| swIpMacBindingIPv6Table OBJECT-TYPE This table specifies the IPv6 IP-MAC binding information. | 1.3.6.1.4.1.171.12.23.4.4 | not-accessible | current | |
| swIpMacBindingIPv6Entry OBJECT-TYPE The IPv6 IP-MAC binding entry is used to add/delete/configure an IPv6 address and MAC address pair in the switch's authorized user database. | 1.3.6.1.4.1.171.12.23.4.4.1 | not-accessible | current | |
| swIpMacBindingIPv6Addr OBJECT-TYPE The IPv6 address of the IPv6 IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.4.1.1 | Ipv6Address | read-only | current |
| swIpMacBindingIPv6MacAddr OBJECT-TYPE The MAC address of the IPv6 IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.4.1.2 | MacAddress | read-create | current |
| swIpMacBindingIPv6Portlist OBJECT-TYPE The port members of the IPv6 IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.4.1.3 | PortList | read-create | current |
| swIpMacBindingIPv6Mode OBJECT-TYPE The mode of the IPv6 IP-MAC binding entry. static(1): When the Static mode is employed, it means this entry is manually configured. dhcp-snooping(2): This mode cannot be configured, and when the dhcp-snooping mode is employed, it means this entry is to be learned by IPv6 DHCP snooping. nd-snooping(3): This mode cannot be configured, and when the nd-snooping mode is employed, it means this entry is to be learned by ND snooping. | 1.3.6.1.4.1.171.12.23.4.4.1.4 | INTEGER {static(1), dhcp-snooping(2), nd-snooping(3)} | read-only | current |
| swIpMacBindingIPv6ACLStatus OBJECT-TYPE The ACL Status of the IPv6 IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.4.1.5 | INTEGER {inactive(1), active(2)} | read-only | current |
| swIpMacBindingIPv6RowStatus OBJECT-TYPE The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). | 1.3.6.1.4.1.171.12.23.4.4.1.6 | RowStatus | read-create | current |
| swIpMacBindingIPv6DHCPSnoopTable OBJECT-TYPE The table specifies information regarding the IPv6 DHCP snooping function learning IPv6 IP-MAC binding entries. | 1.3.6.1.4.1.171.12.23.4.5 | not-accessible | current | |
| swIpMacBindingIPv6DHCPSnoopEntry OBJECT-TYPE A list containing information about the IPv6 DHCP snooping learning IPv6 IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.5.1 | not-accessible | current | |
| swIpMacBindingIPv6DHCPSnoopAddr OBJECT-TYPE The IPv6 address of this entry. | 1.3.6.1.4.1.171.12.23.4.5.1.1 | Ipv6Address | read-only | current |
| swIpMacBindingIPv6DHCPSnoopMac OBJECT-TYPE The MAC address of this entry. | 1.3.6.1.4.1.171.12.23.4.5.1.2 | MacAddress | read-only | current |
| swIpMacBindingIPv6DHCPSnoopLeaseTime OBJECT-TYPE Specifies the lease time of this entry. When the lease time expires, this entry will be removed. | 1.3.6.1.4.1.171.12.23.4.5.1.3 | INTEGER | read-only | current |
| swIpMacBindingIPv6DHCPSnoopPort OBJECT-TYPE Specifies the port of this entry. | 1.3.6.1.4.1.171.12.23.4.5.1.4 | INTEGER | read-only | current |
| swIpMacBindingIPv6DHCPSnoopStatus OBJECT-TYPE Specifies the status (inactive or active) of this entry. | 1.3.6.1.4.1.171.12.23.4.5.1.5 | INTEGER {inactive(1), active(2)} | read-only | current |
| swIpMacBindingNDSnoopTable OBJECT-TYPE The table specifies information regarding the ND snooping function of learning IPv6 IP-MAC binding entries. | 1.3.6.1.4.1.171.12.23.4.6 | not-accessible | current | |
| swIpMacBindingNDSnoopEntry OBJECT-TYPE A list of information about the ND snooping learning IPv6 IP-MAC binding entry. | 1.3.6.1.4.1.171.12.23.4.6.1 | not-accessible | current | |
| swIpMacBindingNDSnoopAddr OBJECT-TYPE The IPv6 address of this entry. | 1.3.6.1.4.1.171.12.23.4.6.1.1 | Ipv6Address | read-only | current |
| swIpMacBindingNDSnoopMac OBJECT-TYPE The MAC address of this entry. | 1.3.6.1.4.1.171.12.23.4.6.1.2 | MacAddress | read-only | current |
| swIpMacBindingNDSnoopLeaseTime OBJECT-TYPE Specifies the lease time of this entry. When the lease time expires, this entry will be removed. | 1.3.6.1.4.1.171.12.23.4.6.1.3 | INTEGER | read-only | current |
| swIpMacBindingNDSnoopPort OBJECT-TYPE Specifies the port of this entry. | 1.3.6.1.4.1.171.12.23.4.6.1.4 | INTEGER | read-only | current |
| swIpMacBindingNDSnoopStatus OBJECT-TYPE Specifies the status (inactive or active) of this entry. | 1.3.6.1.4.1.171.12.23.4.6.1.5 | INTEGER {inactive(1), active(2)} | read-only | current |
| swIpMacBindingUploadDownloadTable OBJECT-TYPE This table indicates information about the DHCPv4 snooping binding entry upload or download parameters. | 1.3.6.1.4.1.171.12.23.4.7 | not-accessible | current | |
| swIpMacBindingUploadDownloadEntry OBJECT-TYPE A list with the DHCPv4 snooping binding entry upload or download parameters.It's contains the Protocol type, IP address type, IP address, Username, Password, TCP port number, Filename, and action of this entry | 1.3.6.1.4.1.171.12.23.4.7.1 | not-accessible | current | |
| swIpMacBindingUploadDownloadProtocol OBJECT-TYPE This object provides the user with a choice of uploading or downloading the selected protocol type. tftp(1) selecting the TFTP protocol to upload or download the DHCPv4 snooping database. ftp(2) selecting the FTP protocol to upload or download the DHCPv4 snooping database. | 1.3.6.1.4.1.171.12.23.4.7.1.1 | INTEGER {tftp(1), ftp(2)} | read-only | current |
| swIpMacBindingUploadDownloadServerIPAddressType OBJECT-TYPE A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address which is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. | 1.3.6.1.4.1.171.12.23.4.7.1.2 | InetAddressType | read-create | current |
| swIpMacBindingUploadDownloadServerIPAddress OBJECT-TYPE Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType object that provides the context. It is suggested that the InetAddressType object be logically registered before the object(s) that use the InetAddress textual convention, if they appear in the same logical row. The value of an InetAddress object must always be consistent with the value of the associated InetAddressType object. Attempts to set an InetAddress object to a value inconsistent with the associated InetAddressType must fail with an inconsistentValue error. | 1.3.6.1.4.1.171.12.23.4.7.1.3 | InetAddress | read-create | current |
| swIpMacBindingUploadDownloadUsername OBJECT-TYPE The username and password to be authenticated by the FTP server. This value MUST be corresponding with Password object, and only use to FTP protocol. | 1.3.6.1.4.1.171.12.23.4.7.1.4 | DisplayString (SIZE(0..64)) | read-create | current |
| swIpMacBindingUploadDownloadPassword OBJECT-TYPE The username and password to be authenticated by the FTP server. This value MUST be corresponding with Username object, and only use to FTP protocol. | 1.3.6.1.4.1.171.12.23.4.7.1.5 | DisplayString (SIZE(0..64)) | read-create | current |
| swIpMacBindingUploadDownloadTcpPort OBJECT-TYPE This object indicates the FTP connecting port number. | 1.3.6.1.4.1.171.12.23.4.7.1.6 | INTEGER (1..65535) | read-create | current |
| swIpMacBindingUploadDownloadFileName OBJECT-TYPE The name of the file to be downloaded from or uploaded to the TFTP or FTP server. | 1.3.6.1.4.1.171.12.23.4.7.1.7 | DisplayString (SIZE(0..64)) | read-create | current |
| swIpMacBindingUploadDownloadAction OBJECT-TYPE This object provides the user with a choice of uploading or downloading the selected file. | 1.3.6.1.4.1.171.12.23.4.7.1.10 | INTEGER {upload(1), download(2)} | read-create | current |
| swIpMacBindingNotify OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.23.5 | |||
| swIpMacBindingNotifyPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.23.5.0 | |||
| swIpMacBindingNotificationBidings OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.23.5.2 | |||
| swIpMacBindingViolationIP OBJECT-TYPE This object indicates the IP address that violates the IP-MAC Binding configuration. | 1.3.6.1.4.1.171.12.23.5.2.1 | IpAddress | accessible-for-notify | current |
| swIpMacBindingViolationMac OBJECT-TYPE This object indicates the MAC address that violates the IP-MAC Binding configuration. | 1.3.6.1.4.1.171.12.23.5.2.2 | MacAddress | accessible-for-notify | current |
| swIpMacBindingViolationIPv6Addr OBJECT-TYPE This object indicates the IPv6 address that violates the IPv6 IP-MAC Binding entry. | 1.3.6.1.4.1.171.12.23.5.2.3 | Ipv6Address | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| swIpMacBindingViolationTrap NOTIFICATION-TYPE When the IP-MAC Binding trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out. | 1.3.6.1.4.1.171.12.23.5.0.1 | current |
| swIpMacBindingStopLearningTrap NOTIFICATION-TYPE When the IP-MAC Binding trap is enabled, if the specific port changes from a normal state to a stop_learning state, a trap will be sent out. | 1.3.6.1.4.1.171.12.23.5.0.2 | current |
| swIpMacBindingRecoverLearningTrap NOTIFICATION-TYPE When the IP-MAC Binding trap is enabled, if the specific port changes from a stop_learning state to a normal state, a trap will be sent out. | 1.3.6.1.4.1.171.12.23.5.0.3 | current |
| swIpMacBindingIPv6ViolationTrap NOTIFICATION-TYPE When the IP-MAC Binding trap is enabled, if there's a new MAC that violates the pre-defined IPv6 IP-MAC Binding configuration, a trap will be sent out. | 1.3.6.1.4.1.171.12.23.5.0.4 | current |
| swIpMacBindingShutdownTrap NOTIFICATION-TYPE When the rate limiting is shutdown mode and the DHCP rate excludes the limiting, a trap will be sent out. | 1.3.6.1.4.1.171.12.23.5.0.5 | current |
| swIpMacBindingRecoveryTrap NOTIFICATION-TYPE When the port is shutdown by DHCP rate limiting and the auto-recovery timer is timeout, a trap will be sent out. | 1.3.6.1.4.1.171.12.23.5.0.6 | current |