IEEE8023-DOT3-LLDP-EXT-V2-MIB
- Registered at
- 1.3.111.2.802.3.1.5
- Last updated
- 2013-04-11 00:00
- Organization
- IEEE 802.3 Working Group
- Revisions
- 2013-04-11 00:00, 2011-02-02 00:00
- Namespace
- standard
- Source file
IEEE8023-DOT3-LLDP-EXT-V2-MIB- Digest
sha256:0dc4dccf365cc5de6f70b6f04b1925fcd2c995b7720113c4866bf8ededcee845
Description
The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information.
Contact
WG-URL: http://www.ieee802.org/3/index.html WG-EMail: STDS-802-3-MIB@LISTSERV.IEEE.ORG Contact: Howard Frazier Postal: 3151 Zanker Road San Jose, CA 95134 USA Tel: +1.408.922.8164 E-mail: hfrazier@broadcom.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifGeneralInformationGroup |
| LLDP-V2-MIB | lldpV2LocPortIfIndex, lldpV2PortConfigEntry, lldpV2RemIndex, lldpV2RemLocalDestMACAddress, lldpV2RemLocalIfIndex, lldpV2RemTimeMark |
| LLDP-V2-TC-MIB | LldpV2PowerPortClass |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, org |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IEEE8023-DOT3-LLDP-EXT-V2-MIB IF-MIB LLDP-V2-MIB LLDP-V2-TC-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| lldpV2Xdot3Objects OBJECT-IDENTITY | 1.3.111.2.802.3.1.5.1 | |||
| lldpV2Xdot3Config OBJECT-IDENTITY | 1.3.111.2.802.3.1.5.1.1 | |||
| lldpV2Xdot3PortConfigTable OBJECT-TYPE A table that controls selection of LLDP TLVs to be transmitted on individual ports. | 1.3.111.2.802.3.1.5.1.1.1 | not-accessible | current | |
| lldpV2Xdot3PortConfigEntry OBJECT-TYPE LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpV2Xdot3PortConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system. | 1.3.111.2.802.3.1.5.1.1.1.1 | not-accessible | current | |
| lldpV2Xdot3PortConfigTLVsTxEnable OBJECT-TYPE The lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed by the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 'macPhyConfigStatus(0)' indicates that the LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that the LLDP agent should transmit 'Power via MDI TLV'. The bit 'unused(2)' is no longer used; this was used for the 'Link Aggregation TLV' in the previous version. The bit 'maxFrameSize(3)' indicates that the LLDP agent should transmit 'Maximum-frame-size TLV'. The default value for lldpV2Xdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | 1.3.111.2.802.3.1.5.1.1.1.1.1 | Bits {macPhyConfigStatus(0), powerViaMDI(1), unused(2), maxFrameSize(3)} | read-write | current |
| lldpV2Xdot3LocalData OBJECT-IDENTITY | 1.3.111.2.802.3.1.5.1.2 | |||
| lldpV2Xdot3LocPortTable OBJECT-TYPE This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent. | 1.3.111.2.802.3.1.5.1.2.1 | not-accessible | current | |
| lldpV2Xdot3LocPortEntry OBJECT-TYPE Information about a particular port component. | 1.3.111.2.802.3.1.5.1.2.1.1 | not-accessible | current | |
| lldpV2Xdot3LocPortAutoNegSupported OBJECT-TYPE The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation. | 1.3.111.2.802.3.1.5.1.2.1.1.1 | TruthValue | read-only | current |
| lldpV2Xdot3LocPortAutoNegEnabled OBJECT-TYPE The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system. | 1.3.111.2.802.3.1.5.1.2.1.1.2 | TruthValue | read-only | current |
| lldpV2Xdot3LocPortAutoNegAdvertisedCap OBJECT-TYPE This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system. | 1.3.111.2.802.3.1.5.1.2.1.1.3 | OCTET STRING (SIZE(2)) | read-only | current |
| lldpV2Xdot3LocPortOperMauType OBJECT-TYPE An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in Clause 13 and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in Clause 13, the value of this field shall be set to zero. | 1.3.111.2.802.3.1.5.1.2.1.1.4 | Unsigned32 (0..2147483647) | read-only | current |
| lldpV2Xdot3LocPowerTable OBJECT-TYPE This table contains one row per port of power Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to this agent. | 1.3.111.2.802.3.1.5.1.2.2 | not-accessible | current | |
| lldpV2Xdot3LocPowerEntry OBJECT-TYPE Information about a particular port component. | 1.3.111.2.802.3.1.5.1.2.2.1 | not-accessible | current | |
| lldpV2Xdot3LocPowerPortClass OBJECT-TYPE The value that identifies the port Class of the given port associated with the local system. | 1.3.111.2.802.3.1.5.1.2.2.1.1 | LldpV2PowerPortClass | read-only | current |
| lldpV2Xdot3LocPowerMDISupported OBJECT-TYPE The truth value used to indicate whether the MDI power is supported on the given port associated with the local system. | 1.3.111.2.802.3.1.5.1.2.2.1.2 | TruthValue | read-only | current |
| lldpV2Xdot3LocPowerMDIEnabled OBJECT-TYPE The truth value used to identify whether MDI power is enabled on the given port associated with the local system. | 1.3.111.2.802.3.1.5.1.2.2.1.3 | TruthValue | read-only | current |
| lldpV2Xdot3LocPowerPairControlable OBJECT-TYPE The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system. | 1.3.111.2.802.3.1.5.1.2.2.1.4 | TruthValue | read-only | current |
| lldpV2Xdot3LocPowerPairs OBJECT-TYPE This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the local system. | 1.3.111.2.802.3.1.5.1.2.2.1.5 | Unsigned32 (1 | 2) | read-only | current |
| lldpV2Xdot3LocPowerClass OBJECT-TYPE This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the local system. | 1.3.111.2.802.3.1.5.1.2.2.1.6 | Unsigned32 (1 | 2 | 3 | 4 | 5) | read-only | current |
| lldpV2Xdot3LocPowerType OBJECT-TYPE A GET returns an integer indicating whether the local system is a PSE or a PD and whether it is Type 1 or Type 2. | 1.3.111.2.802.3.1.5.1.2.2.1.7 | INTEGER {psetype1(0), psetype2(1), pdtype(2), pdtype2(3)} | read-only | current |
| lldpV2Xdot3LocPowerSource OBJECT-TYPE A GET returns an integer indicating the power sources of the local system. A PSE indicates whether it is being powered by a primary power source; a backup power source; or unknown. A PD indicates whether it is being powered by a PSE and locally; by a PSE only; or unknown. | 1.3.111.2.802.3.1.5.1.2.2.1.8 | INTEGER {pseprimary(0), psebackup(1), pseunknown(2), pdpseandlocal(3), pdpseonly(4), pdunknown(5)} | read-only | current |
| lldpV2Xdot3LocPowerPriority OBJECT-TYPE A GET returns the priority of a PD system. For a PSE, this is the priority that the PSE assigns to the PD. For a PD, this is the priority that the PD requests from the PSE. A SET operation changes the priority of the PD system to the indicated value. | 1.3.111.2.802.3.1.5.1.2.2.1.9 | INTEGER {low(0), high(1), critical(2), unknown(3)} | read-write | current |
| lldpV2Xdot3LocPDRequestedPowerValue OBJECT-TYPE A GET returns the PD requested power value. For a PD, it is the power value that the PD has currently requested from the remote system. PD requested power value is the maximum input average power the PD ever draws under this power allocation if accepted. For a PSE, it is the power value that the PSE mirrors back to the remote system. This is the PD requested power value that was used by the PSE to compute the power it has currently allocated to the remote system. The PD requested power value is encoded according to IEEE Std 802.3 Equation (79?1), where X is the decimal value of aLldpXdot3LocPDRequestedPowerValue. | 1.3.111.2.802.3.1.5.1.2.2.1.10 | Integer32 | read-only | current |
| lldpV2Xdot3LocPSEAllocatedPowerValue OBJECT-TYPE A GET returns the PSE allocated power value. For a PSE, it is the power value that the PSE has currently allocated to the remote system. The PSE allocated power value is the maximum input average power that the PSE wants the PD to ever draw under this allocation if it is accepted. For a PD, it is the power value that the PD mirrors back to the remote system. This is the PSE allocated power value that was used by the PD to compute the power that it has currently requested from the remote system. The PSE allocated power value is encoded according to IEEE Std 802.3 Equation (79?2), where X is the decimal value of aLldpXdot3LocPSEAllocatedPowerValue. | 1.3.111.2.802.3.1.5.1.2.2.1.11 | Integer32 | read-only | current |
| lldpV2Xdot3LocResponseTime OBJECT-TYPE A GET returns the response time in seconds of the local system. For a PD, it is the maximum time required to update the value of lldpV2Xdot3LocPDRequestedPowerValue when the remote system requests the PD to change its max power draw. For a PSE, it is the maximum time required to update the value of lldpV2Xdot3LocPDRequestedPowerValue when the remote system requests of the PSE a new power value. | 1.3.111.2.802.3.1.5.1.2.2.1.12 | Integer32 | read-only | current |
| lldpV2Xdot3LocReady OBJECT-TYPE The truth value used to identify whether the local Data Link Layer classification engine has completed initialization and is ready to receive and transmit LLDPDUs. | 1.3.111.2.802.3.1.5.1.2.2.1.13 | TruthValue | read-only | current |
| lldpV2Xdot3LocReducedOperationPowerValue OBJECT-TYPE A GET returns the reduced operation power value. For a PD, it is a power value that is lower than the currently requested power value. This reduced operation power value represents a power state in which the PD could continue to operate, but with less functionality than at the current PD requested power value. The PSE could optionally use this information in the event that the PSE subsequently requests a lower PD power value than the PD requested power value. For a PSE, it is a power value that the PSE could ask the PD to move to if the PSE wants the PD to move to a lower power state. The definition and encoding of PD requested power value is the same as described in lldpV2Xdot3LocPDRequestedPowerValue. The default value for this field is the hexadecimal value FFFF | 1.3.111.2.802.3.1.5.1.2.2.1.14 | Integer32 | read-only | current |
| lldpV2Xdot3LocMaxFrameSizeTable OBJECT-TYPE This table contains one row per port of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to this agent. | 1.3.111.2.802.3.1.5.1.2.3 | not-accessible | current | |
| lldpV2Xdot3LocMaxFrameSizeEntry OBJECT-TYPE Maximum Frame Size information about a particular port component. | 1.3.111.2.802.3.1.5.1.2.3.1 | not-accessible | current | |
| lldpV2Xdot3LocMaxFrameSize OBJECT-TYPE An integer value indicating the maximum supported frame size in octets on the given port of the local system. | 1.3.111.2.802.3.1.5.1.2.3.1.1 | Unsigned32 (0..65535) | read-only | current |
| lldpV2Xdot3LocEEETable OBJECT-TYPE This table contains one row per port of Energy Efficient Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to this agent. | 1.3.111.2.802.3.1.5.1.2.4 | not-accessible | current | |
| lldpV2Xdot3LocEEEEntry OBJECT-TYPE Information about a particular port component. | 1.3.111.2.802.3.1.5.1.2.4.1 | not-accessible | current | |
| lldpV2Xdot3LocTxTwSys OBJECT-TYPE A GET returns the value of Tw_sys_tx that the local system can support in the transmit direction. This object maps to the variable LocTxSystemValue as defined in IEEE Std 802.3 78.4.2.3. | 1.3.111.2.802.3.1.5.1.2.4.1.1 | Integer32 | read-only | current |
| lldpV2Xdot3LocTxTwSysEcho OBJECT-TYPE A GET returns the value of Tw_sys_tx that the remote system is advertising that it can support in the transmit direction and is echoed by the local system under the control of the EEE DLL receiver state diagram. This object maps to the variable LocTxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3 | 1.3.111.2.802.3.1.5.1.2.4.1.2 | Integer32 | read-only | current |
| lldpV2Xdot3LocRxTwSys OBJECT-TYPE A GET returns the value of Tw_sys_tx that the local system is requesting in the receive direction. This object maps to the variable LocRxSystemValue as defined in IEEE Std 802.3 78.4.2.3. | 1.3.111.2.802.3.1.5.1.2.4.1.3 | Integer32 | read-only | current |
| lldpV2Xdot3LocRxTwSysEcho OBJECT-TYPE A GET returns the value of Tw_sys_tx that the remote system is advertising that it is requesting in the receive direction and is echoed by the local system under the control of the EEE DLL transmitter state diagram. This object maps to the variable LocRxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3. | 1.3.111.2.802.3.1.5.1.2.4.1.4 | Integer32 | read-only | current |
| lldpV2Xdot3LocFbTwSys OBJECT-TYPE A GET returns the value of the fallback Tw_sys_tx that the local system is advertising to the remote system. This object maps to the variable LocFbSystemValue as defined in IEEE Std 802.3 78.4.2.3. | 1.3.111.2.802.3.1.5.1.2.4.1.5 | Integer32 | read-only | current |
| lldpV2Xdot3TxDllReady OBJECT-TYPE The truth value used to identify whether the local Data Link Layer EEE layer management function has completed initialization and is ready to receive and transmit LLDPDUs. | 1.3.111.2.802.3.1.5.1.2.4.1.6 | TruthValue | read-only | current |
| lldpV2Xdot3RxDllReady OBJECT-TYPE The truth value used to identify whether the local Data Link Layer EEE layer management function has completed initialization and is ready to receive and transmit LLDPDUs. | 1.3.111.2.802.3.1.5.1.2.4.1.7 | TruthValue | read-only | current |
| lldpV2Xdot3LocDllEnabled OBJECT-TYPE The truth value used to identify whether the local system has completed auto-negotiation with a link partner that has indicated at leat one EEE capability. | 1.3.111.2.802.3.1.5.1.2.4.1.8 | TruthValue | read-only | current |
| lldpV2Xdot3RemoteData OBJECT-IDENTITY | 1.3.111.2.802.3.1.5.1.3 | |||
| lldpV2Xdot3RemPortTable OBJECT-TYPE This table contains Ethernet port information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system. | 1.3.111.2.802.3.1.5.1.3.1 | not-accessible | current | |
| lldpV2Xdot3RemPortEntry OBJECT-TYPE Information about a particular physical network connection. | 1.3.111.2.802.3.1.5.1.3.1.1 | not-accessible | current | |
| lldpV2Xdot3RemPortAutoNegSupported OBJECT-TYPE The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation. | 1.3.111.2.802.3.1.5.1.3.1.1.1 | TruthValue | read-only | current |
| lldpV2Xdot3RemPortAutoNegEnabled OBJECT-TYPE The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system. | 1.3.111.2.802.3.1.5.1.3.1.1.2 | TruthValue | read-only | current |
| lldpV2Xdot3RemPortAutoNegAdvertisedCap OBJECT-TYPE This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system. | 1.3.111.2.802.3.1.5.1.3.1.1.3 | OCTET STRING (SIZE(2)) | read-only | current |
| lldpV2Xdot3RemPortOperMauType OBJECT-TYPE An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in Clause 13 and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in Clause 13, the value of this field shall be set to zero. | 1.3.111.2.802.3.1.5.1.3.1.1.4 | Unsigned32 (0..2147483647) | read-only | current |
| lldpV2Xdot3RemPowerTable OBJECT-TYPE This table contains Ethernet power information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system. | 1.3.111.2.802.3.1.5.1.3.2 | not-accessible | current | |
| lldpV2Xdot3RemPowerEntry OBJECT-TYPE Information about a particular physical network connection. | 1.3.111.2.802.3.1.5.1.3.2.1 | not-accessible | current | |
| lldpV2Xdot3RemPowerPortClass OBJECT-TYPE The value that identifies the port Class of the given port associated with the remote system. | 1.3.111.2.802.3.1.5.1.3.2.1.1 | LldpV2PowerPortClass | read-only | current |
| lldpV2Xdot3RemPowerMDISupported OBJECT-TYPE The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system. | 1.3.111.2.802.3.1.5.1.3.2.1.2 | TruthValue | read-only | current |
| lldpV2Xdot3RemPowerMDIEnabled OBJECT-TYPE The truth value used to identify whether MDI power is enabled on the given port associated with the remote system. | 1.3.111.2.802.3.1.5.1.3.2.1.3 | TruthValue | read-only | current |
| lldpV2Xdot3RemPowerPairControlable OBJECT-TYPE The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system. | 1.3.111.2.802.3.1.5.1.3.2.1.4 | TruthValue | read-only | current |
| lldpV2Xdot3RemPowerPairs OBJECT-TYPE This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the remote system. | 1.3.111.2.802.3.1.5.1.3.2.1.5 | Unsigned32 (1 | 2) | read-only | current |
| lldpV2Xdot3RemPowerClass OBJECT-TYPE This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the remote system. | 1.3.111.2.802.3.1.5.1.3.2.1.6 | Unsigned32 (1 | 2 | 3 | 4 | 5) | read-only | current |
| lldpV2Xdot3RemPowerType OBJECT-TYPE A GET returns an integer indicating whether the remote system is a PSE or a PD and whether it is Type 1 or Type 2. | 1.3.111.2.802.3.1.5.1.3.2.1.7 | INTEGER {psetype1(0), psetype2(1), pdtype(2), pdtype2(3)} | read-only | current |
| lldpV2Xdot3RemPowerSource OBJECT-TYPE A GET returns an integer indicating the power sources of the remote system. When the remote system is a PSE, it indicates whether it is being powered by a primary power source; a backup power source; or unknown. When the remote system is a PD, it indicates whether it is being powered by a PSE and locally; locally only; by a PSE only; or unknown. | 1.3.111.2.802.3.1.5.1.3.2.1.8 | INTEGER {pseprimary(0), psebackup(1), pseunknown(2), pdpseandlocal(3), pdlocalonly(4), pdpseonly(5), pdunknown(6)} | read-only | current |
| lldpV2Xdot3RemPowerPriority OBJECT-TYPE A GET returns the priority of a PD system. For a PSE, this is the priority that the remote system requests. For a PD, this is the priority that the remote system has assigned. | 1.3.111.2.802.3.1.5.1.3.2.1.9 | INTEGER {low(0), high(1), critical(2), unknown(3)} | read-write | current |
| lldpV2Xdot3RemPDRequestedPowerValue OBJECT-TYPE A GET returns the PD requested power value that was used by the remote system to compute the power value that is has currently allocated to the PD. For a PSE, it is the PD requested power value received from the remote system. The definition and encoding of PD requested power value is the same as described in lldpV2Xdot3LocPDRequestedPowerValue. | 1.3.111.2.802.3.1.5.1.3.2.1.10 | Integer32 | read-only | current |
| lldpV2Xdot3RemPSEAllocatedPowerValue OBJECT-TYPE A GET returns the PSE allocated power value received from the remote system. For a PSE, it is the PSE allocated power value that was used by the remote system to compute the power value that it has currently requested from the PSE. For a PD, it is the PSE allocated power value received from the remote system. The definition and encoding of PSE allocated power value is the same as described in lldpV2Xdot3LocPSEAllocatedPowerValue. | 1.3.111.2.802.3.1.5.1.3.2.1.11 | Integer32 | read-only | current |
| lldpV2Xdot3RemMaxFrameSizeTable OBJECT-TYPE This table contains one row per port/destination address pair of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system. | 1.3.111.2.802.3.1.5.1.3.3 | not-accessible | current | |
| lldpV2Xdot3RemMaxFrameSizeEntry OBJECT-TYPE Maximum Frame Size information about a particular port component. | 1.3.111.2.802.3.1.5.1.3.3.1 | not-accessible | current | |
| lldpV2Xdot3RemMaxFrameSize OBJECT-TYPE An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system. | 1.3.111.2.802.3.1.5.1.3.3.1.1 | Unsigned32 (0..65535) | read-only | current |
| lldpV2Xdot3RemEEETable OBJECT-TYPE This table contains one row per port of Energy Efficient Ethernet information (as a part of the LLDP IEEE 802.3 organizational extension) on the local system known to this agent. | 1.3.111.2.802.3.1.5.1.3.4 | not-accessible | current | |
| lldpV2Xdot3RemEEEEntry OBJECT-TYPE Information about a particular port component. | 1.3.111.2.802.3.1.5.1.3.4.1 | not-accessible | current | |
| lldpV2Xdot3RemTxTwSys OBJECT-TYPE A GET returns the value of Tw_sys_tx that the remote system can support in the transmit direction. This object maps to the variable RemTxSystemValue as defined in IEEE Std 802.3 78.4.2.3. | 1.3.111.2.802.3.1.5.1.3.4.1.1 | Integer32 | read-only | current |
| lldpV2Xdot3RemTxTwSysEcho OBJECT-TYPE A GET returns the value of Tw_sys_tx that the local system is advertising that it can support in the transmit direction as echoed by the remote system under the control of the EEE DLL receiver state diagram. This object maps to the variable RemTxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3 | 1.3.111.2.802.3.1.5.1.3.4.1.2 | Integer32 | read-only | current |
| lldpV2Xdot3RemRxTwSys OBJECT-TYPE A GET returns the value of Tw_sys_tx that the remote system is requesting in the receive direction. This object maps to the variable RemRxSystemValue as defined in IEEE Std 802.3 78.4.2.3. | 1.3.111.2.802.3.1.5.1.3.4.1.3 | Integer32 | read-only | current |
| lldpV2Xdot3RemRxTwSysEcho OBJECT-TYPE A GET returns the value of Tw_sys_tx that the local system is advertising that it is requesting in the receive direction and is echoed by the remote system under the control of the EEE DLL transmitter state diagram. This object maps to the variable RemRxSystemValueEcho as defined in IEEE Std 802.3 78.4.2.3. | 1.3.111.2.802.3.1.5.1.3.4.1.4 | Integer32 | read-only | current |
| lldpV2Xdot3RemFbTwSys OBJECT-TYPE A GET returns the value of the fallback Tw_sys_tx that the remote system is advertising. This object maps to the variable RemFbSystemValue as defined in IEEE Std 802.3 78.4.2.3. | 1.3.111.2.802.3.1.5.1.3.4.1.5 | Integer32 | read-only | current |
| lldpV2Xdot3Conformance OBJECT-IDENTITY | 1.3.111.2.802.3.1.5.2 | |||
| lldpV2Xdot3Compliances OBJECT-IDENTITY | 1.3.111.2.802.3.1.5.2.1 | |||
| lldpV2Xdot3Groups OBJECT-IDENTITY | 1.3.111.2.802.3.1.5.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| lldpV2Xdot3TxRxCompliance MODULE-COMPLIANCE A compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for all agents that implement the LLDP IEEE 802.3 organizational extension in TX and/or RX mode. This version defines compliance requirements for V2 of the LLDP MIB. | 1.3.111.2.802.3.1.5.2.1.1 | current |
| lldpV2Xdot3TxCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for agents that implement the LLDP IEEE 802.3 organizational extension in the TX mode. This version defines compliance requirements for V2 of the LLDP MIB. | 1.3.111.2.802.3.1.5.2.1.2 | current |
| lldpV2Xdot3RxCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities that implement the LLDP IEEE 802.3 organizational extension MIB. This group is mandatory for agents that implement the LLDP IEEE 802.3 organizational extension in the RX mode. This version defines compliance requirements for V2 of the LLDP MIB. | 1.3.111.2.802.3.1.5.2.1.3 | current |
| lldpV2Xdot3ConfigGroup OBJECT-GROUP The collection of objects that are used to configure the LLDP IEEE 802.3 organizational extension implementation behavior. | 1.3.111.2.802.3.1.5.2.2.1 | current |
| lldpV2Xdot3LocSysGroup OBJECT-GROUP The collection of objects that are used to represent LLDP IEEE 802.3 organizational extension Local Device Information. | 1.3.111.2.802.3.1.5.2.2.2 | current |
| lldpV2Xdot3RemSysGroup OBJECT-GROUP The collection of objects that are used to represent LLDP IEEE 802.3 organizational extension Local Device Information. | 1.3.111.2.802.3.1.5.2.2.3 | current |