IEEE8021-PB-MIB
- Registered at
- 1.3.111.2.802.1.1.5
- Last updated
- 2022-11-08 00:00
- Organization
- IEEE 802.1 Working Group
- Revisions
- 2022-11-08 00:00, 2018-07-01 00:00, 2014-12-15 00:00, 2012-02-10 00:00, 2011-04-06 00:00, 2011-02-27 00:00, 2010-08-26 00:00, 2008-10-15 00:00
- Namespace
- standard
- Source file
IEEE8021-PB-MIB- Digest
sha256:d9f306c9088ece72146f7df944660a938c5aa6bb8f40a9f12c701bc918bef124
Description
Provider Bridge MIB module. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2022. Copyright (C) IEEE (2022). This version of this MIB module is part of IEEE Std 802.1Q; see that standard for full legal notices.
Contact
WG-URL: http://www.ieee802.org/1/ WG-EMail: stds-802-1-l@ieee.org Contact: IEEE 802.1 Working Group Chair Postal: C/O IEEE 802.1 Working Group IEEE Standards Association 445 Hoes Lane Piscataway, NJ 08854 USA E-mail: stds-802-1-chairs@ieee.org
Imports
| From | Symbols |
|---|---|
| IEEE8021-BRIDGE-MIB | ieee8021BridgeBasePort, ieee8021BridgeBasePortComponentId |
| IEEE8021-TC-MIB | IEEE8021BridgePortNumberOrZero, IEEE8021BridgePortType, IEEE8021PbbComponentIdentifierOrZero, IEEE8021PortAcceptableFrameTypes, IEEE8021PriorityValue, ieee802dot1mibs |
| Q-BRIDGE-MIB | VlanId, VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANAifType-MIB IEEE8021-BRIDGE-MIB IEEE8021-PB-MIB IEEE8021-TC-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ieee8021PbNotifications OBJECT-IDENTITY | 1.3.111.2.802.1.1.5.0 | |||
| ieee8021PbObjects OBJECT-IDENTITY | 1.3.111.2.802.1.1.5.1 | |||
| ieee8021PbVidTranslationTable OBJECT-TYPE This table is used to configure the VID Translation Table defined in 12.10.1.8. The VID Translation Table is used to implement a bidirectional mapping between a local S-VID, used in data and protocol frames transmitted and received through a CNP or PNP, and a relay S-VID, used by the filtering and forwarding process. Each row in this table is indexed by component, port, and local S-VID value and indicates the relay S-VID value to be used for the specified S-VID. If no entry for a component, port, and local-svid is present in this table is present then the relay S-VID used for a frame received on that port with the local S-VID value will be the S-VID that has the same numeric value as the local S-VID of the received frame. Entries in this table must be persistent over power up restart/reboot. | 1.3.111.2.802.1.1.5.1.1 | not-accessible | deprecated | |
| ieee8021PbVidTranslationEntry OBJECT-TYPE An entry for the S-VID translation table, which includes both the Local and Relay S-VIDs between which the PNP or CNP translates. Note that the component ID of entries in this table must refer to the S-VLAN Component of a Provider Bridge. | 1.3.111.2.802.1.1.5.1.1.1 | not-accessible | deprecated | |
| ieee8021PbVidTranslationLocalVid OBJECT-TYPE The S-VID on received (transmitted) at the ISS of a CNP or PNP. | 1.3.111.2.802.1.1.5.1.1.1.1 | VlanId | not-accessible | deprecated |
| ieee8021PbVidTranslationRelayVid OBJECT-TYPE The translated S-VID delivered (received) over the EISS from a CNP or PNP. The default value of this object on creation will be the value of the corresponding instance of ieee8021PbVidTranslationLocalVid. | 1.3.111.2.802.1.1.5.1.1.1.2 | VlanId | read-create | deprecated |
| ieee8021PbVidTranslationRowStatus OBJECT-TYPE This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1). | 1.3.111.2.802.1.1.5.1.1.1.3 | RowStatus | read-create | deprecated |
| ieee8021PbCVidRegistrationTable OBJECT-TYPE A table used in a CEP to create the mapping between a C-VID and a service represented by an S-VID. Note that the component ID of entries in this table must refer to the S-VLAN component of a Provider Edge Bridge and the Port Number must refer to the port number of the Customer Edge Port associated with that Provider Edge Bridge. Entries in this table must be persistent over power up restart/reboot. | 1.3.111.2.802.1.1.5.1.2 | not-accessible | current | |
| ieee8021PbCVidRegistrationEntry OBJECT-TYPE An element of the C-VID registration table accessed by PB C-VLAN component, Customer Edge Port Bridge Port number, and C-VID. Each element contains the mapping between a C-VID and the S-VID that carries the service and booleans for handling untagged frames at the PEP and CEP. | 1.3.111.2.802.1.1.5.1.2.1 | not-accessible | current | |
| ieee8021PbCVidRegistrationCVid OBJECT-TYPE C-VID of this C-VID registration entry. | 1.3.111.2.802.1.1.5.1.2.1.1 | VlanId | not-accessible | current |
| ieee8021PbCVidRegistrationSVid OBJECT-TYPE S-VID for this C-VID registration entry. | 1.3.111.2.802.1.1.5.1.2.1.2 | VlanId | read-create | current |
| ieee8021PbCVidRegistrationUntaggedPep OBJECT-TYPE A flag indicating if this C-VID should be carried untagged at the PEP. A value of true(1) means untagged. | 1.3.111.2.802.1.1.5.1.2.1.3 | TruthValue | read-create | current |
| ieee8021PbCVidRegistrationUntaggedCep OBJECT-TYPE A flag indicating if this C-VID should be carried untagged at the CEP. A value of true(1) means untagged. | 1.3.111.2.802.1.1.5.1.2.1.4 | TruthValue | read-create | current |
| ieee8021PbCVidRegistrationRowStatus OBJECT-TYPE This indicates the status of an entry in this table, and is used to create/delete entries. The value of ieee8021PbCVidRegistrationSVid must be set before an entry in this table can be made valid. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1). | 1.3.111.2.802.1.1.5.1.2.1.5 | RowStatus | read-create | current |
| ieee8021PbEdgePortTable OBJECT-TYPE A Provider Edge Port (PEP) table that indicates the subset of parameters needed for each PEP. | 1.3.111.2.802.1.1.5.1.3 | not-accessible | current | |
| ieee8021PbEdgePortEntry OBJECT-TYPE An entry in the PEP table indexed by ComponentID and S-VID and containing parameters used to configure ingress filtering on the PEP, thus affecting traffic transiting from the provider network to the customer edge port. The columns allow the default C-VID value and default priority to be specified and PEP's ingress filtering operation to be controlled. Note that the component ID of entries in this table must refer to an S-VLAN component of a provider edge Bridge and the Bridge Port number must refer to the port number of a Customer Edge Port associated with that Provider Edge Bridge. | 1.3.111.2.802.1.1.5.1.3.1 | not-accessible | current | |
| ieee8021PbEdgePortSVid OBJECT-TYPE The 12 bit S-VID associated with the PEP. | 1.3.111.2.802.1.1.5.1.3.1.1 | VlanId | not-accessible | current |
| ieee8021PbEdgePortPVID OBJECT-TYPE A 12-bit C-VID to be used for untagged frames received at the Provider Edge Port. | 1.3.111.2.802.1.1.5.1.3.1.2 | VlanId | read-write | current |
| ieee8021PbEdgePortDefaultUserPriority OBJECT-TYPE An integer range 0-7 to be used for untagged frames received at the Provider Edge Port. | 1.3.111.2.802.1.1.5.1.3.1.3 | IEEE8021PriorityValue | read-write | current |
| ieee8021PbEdgePortAcceptableFrameTypes OBJECT-TYPE the Acceptable Frame Types for frames received at the PEP. The permissible values for the parameter are: 1) Admit all frames; 2) Admit only untagged and Priority-tagged frames; 3) Admit only VLAN-tagged frames. | 1.3.111.2.802.1.1.5.1.3.1.4 | IEEE8021PortAcceptableFrameTypes | read-write | current |
| ieee8021PbEdgePortEnableIngressFiltering OBJECT-TYPE Filtering parameter for frames received at the PEP. The permissible values for the parameter are: true(1) Enabled; false(2) Disabled. | 1.3.111.2.802.1.1.5.1.3.1.5 | TruthValue | read-write | current |
| ieee8021PbServicePriorityRegenerationTable OBJECT-TYPE The priority regeneration table for this PEP. | 1.3.111.2.802.1.1.5.1.4 | not-accessible | current | |
| ieee8021PbServicePriorityRegenerationEntry OBJECT-TYPE An element of the PEP priority regeneration table indexed by Component ID, Bridge Port number, S-VID, and received priority. Each element contains the regenerated priority. Note that the component ID of entries in this table must refer to the S-VLAN component of a Provider Edge Bridge and the Port Number must refer to the port number of the Customer Edge Port associated with that S-VLAN component. | 1.3.111.2.802.1.1.5.1.4.1 | not-accessible | current | |
| ieee8021PbServicePriorityRegenerationSVid OBJECT-TYPE S-VID for this regeneration table entry. | 1.3.111.2.802.1.1.5.1.4.1.1 | VlanId | not-accessible | current |
| ieee8021PbServicePriorityRegenerationReceivedPriority OBJECT-TYPE Received priority for this regeneration table entry. | 1.3.111.2.802.1.1.5.1.4.1.2 | IEEE8021PriorityValue | not-accessible | current |
| ieee8021PbServicePriorityRegenerationRegeneratedPriority OBJECT-TYPE The regenerated priority contained in this regeneration table entry. | 1.3.111.2.802.1.1.5.1.4.1.3 | IEEE8021PriorityValue | read-write | current |
| ieee8021PbCnpTable OBJECT-TYPE This table is used for dynamic creation and deletion of Customer Network Ports on S-VLAN components or I-components. Creation of an entry in this table will implicitly also create a corresponding entry in the ieee8021BridgeBasePortTable. Entries in this table must be persistent across reinitializations of the management system. | 1.3.111.2.802.1.1.5.1.5 | not-accessible | current | |
| ieee8021PbCnpEntry OBJECT-TYPE Represents a dynamically created Customer Network Port. | 1.3.111.2.802.1.1.5.1.5.1 | not-accessible | current | |
| ieee8021PbCnpCComponentId OBJECT-TYPE The component ID of the C-Vlan component if this is an internal customer network port. The value must be 0 for an external customer network port. This value must be consistent with the value of the corresponding instance of ieee8021PbCnpSVid. Both must be non-zero, or both must be zero. | 1.3.111.2.802.1.1.5.1.5.1.1 | IEEE8021PbbComponentIdentifierOrZero | read-create | current |
| ieee8021PbCnpSVid OBJECT-TYPE The S-VID for service for an internal customer network port. For an external port, this value must be 0. This value must be consistent with the value of the corresponding instance of ieee8021PbCnpCComponentId. Both must be non-zero, or both must be zero. | 1.3.111.2.802.1.1.5.1.5.1.2 | VlanIdOrNone | read-create | current |
| ieee8021PbCnpRowStatus OBJECT-TYPE This object is used for creation/deletion of entries in this table. All columns in this table must have valid values before this object can be set to active(1). While the value of this object is active(1), the values of other columns in the same entry may not be modified. | 1.3.111.2.802.1.1.5.1.5.1.3 | RowStatus | read-create | current |
| ieee8021PbPnpTable OBJECT-TYPE This table is used for dynamic creation and deletion of Provider Network Ports on S-VLAN components or B-components. Creation of an entry in this table will implicitly also create a corresponding entry in the ieee8021BridgeBasePortTable. Entries in this table must be persistent across reinitializations of the management system. | 1.3.111.2.802.1.1.5.1.6 | not-accessible | current | |
| ieee8021PbPnpEntry OBJECT-TYPE Represents a dynamically created Provider Network Port. | 1.3.111.2.802.1.1.5.1.6.1 | not-accessible | current | |
| ieee8021PbPnpRowStatus OBJECT-TYPE This object is used for creation/deletion of entries in this table. | 1.3.111.2.802.1.1.5.1.6.1.1 | RowStatus | read-create | current |
| ieee8021PbCepTable OBJECT-TYPE This table is used to create Customer Edge Ports, CEPs, on a provider edge Bridge. It is indexed by the ComponentId of the PEB's S-VLAN component and by the port number for the CEP. Note that the CEP's port number belongs to the set of port numbers associated with the PEB's S-VLAN component. Entries in this table must be persistent across reinitializations of the management system. However, note that some column values, as noted below, may change across system reinitializations. | 1.3.111.2.802.1.1.5.1.7 | not-accessible | current | |
| ieee8021PbCepEntry OBJECT-TYPE The entry of the ieee8021PbCepTable. Note that the component index must refer to the S-VLAN component of a PEB, and that the port number for the CEP is allocated from the port number space of that S-VLAN component. | 1.3.111.2.802.1.1.5.1.7.1 | not-accessible | current | |
| ieee8021PbCepCComponentId OBJECT-TYPE This column is an implementation specific column that may be used to map the C component associated with this CEP to other tables within the system, such as the Entity MIB. This column may not be created or modified by management station action. A value of 0 is always legal, and non-zero values will be interpreted in an implementation specific manner. The value of this column may or may not persist across system restarts. | 1.3.111.2.802.1.1.5.1.7.1.1 | IEEE8021PbbComponentIdentifierOrZero | read-only | current |
| ieee8021PbCepCepPortNumber OBJECT-TYPE This column is an implementation specific column that may be used to map the CEP to other tables within the system, for example the Entity MIB. This column may not be created or modified by management station action. A value of 0 is always legal, and non-zero values will be interpreted in an implementation specific manner. The value of this column may or may not persist across system restarts. | 1.3.111.2.802.1.1.5.1.7.1.2 | IEEE8021BridgePortNumberOrZero | read-only | current |
| ieee8021PbCepRowStatus OBJECT-TYPE This indicates the status of the entry, and is used to create and delete entries in this table. | 1.3.111.2.802.1.1.5.1.7.1.3 | RowStatus | read-create | current |
| ieee8021PbRcapTable OBJECT-TYPE This table is used to create Remote Customer Access Ports, on a provider edge Bridge. It is indexed by the ComponentId of the PEB's S-VLAN component and by the port number for the RCAP. Note that the index port number belongs to the set of port numbers associated with the PEB's primary S-VLAN component. Entries in this table must be persistent across reinitializations of the management agent. However, note that some column values, as noted below, may change across system reinitializations. | 1.3.111.2.802.1.1.5.1.8 | not-accessible | current | |
| ieee8021PbRcapEntry OBJECT-TYPE The entry of the ieee8021PbRcapTable. Note that the component index must refer to the primary S-VLAN component of a PEB, and that the port number index for the RCAP is allocated from the port number space of that S-VLAN component. | 1.3.111.2.802.1.1.5.1.8.1 | not-accessible | current | |
| ieee8021PbRcapSComponentId OBJECT-TYPE This column is an implementation specific column that may be used to map the Port-mapping S-VLAN component associated with this RCAP to other tables within the system, such as the Entity MIB. This column may not be created or modified by management station action. A value of 0 is always legal, and non-zero values will be interpreted in an implementation specific manner. The value of this column may or may not persist across system restarts. | 1.3.111.2.802.1.1.5.1.8.1.1 | IEEE8021PbbComponentIdentifierOrZero | read-only | current |
| ieee8021PbRcapRcapPortNumber OBJECT-TYPE This column is an implementation specific column that may be used to map the RCAP to other tables within the system, for example the Entity MIB. This column may not be created or modified by management station action. A value of 0 is always legal, and non-zero values will be interpreted in an implementation specific manner. The value of this column may or may not persist across system restarts. | 1.3.111.2.802.1.1.5.1.8.1.2 | IEEE8021BridgePortNumberOrZero | read-only | current |
| ieee8021PbRcapRowStatus OBJECT-TYPE This indicates the status of the entry, and is used to create and delete entries in this table. | 1.3.111.2.802.1.1.5.1.8.1.3 | RowStatus | read-create | current |
| ieee8021PbInternalInterfaceTable OBJECT-TYPE A table used in a Port-mapping S-VLAN component associated with a Remote Customer Access Port to manage the mapping between external S-VIDs and internal interfaces/S-VIDs. Note that the component ID of entries in this table must refer to the primary S-VLAN component of a Provider Edge Bridge and the Port Number must refer to the port number of a Remote Customer Access Port associated with that S-VLAN component. Entries in this table must be persistent over power up restart/reboot. | 1.3.111.2.802.1.1.5.1.9 | not-accessible | current | |
| ieee8021PbIiEntry OBJECT-TYPE An element of the internal interface table accessed by PB S-VLAN component ID, Remote Customer Access Port Bridge Port number, and external S-VID. Each element contains the mapping between an external S-VID and the internal port it selects and, except in the case of a C-tagged service interface the internal S-VID that carries the service . | 1.3.111.2.802.1.1.5.1.9.1 | not-accessible | current | |
| ieee8021PbIiExternalSVid OBJECT-TYPE External S-VID for this internal interface table entry. | 1.3.111.2.802.1.1.5.1.9.1.1 | VlanId | not-accessible | current |
| ieee8021PbIiInternalPortNumber OBJECT-TYPE The port number for the internal port on the primary S-VLAN component. This port number is used in FDB entries that reference an RCSI. The port number of the Remote Customer Access Port can be used to identify a PNP on the primary S-VLAN component connected to a PNP on the Port-mapping S-VLAN component. | 1.3.111.2.802.1.1.5.1.9.1.2 | IEEE8021BridgePortNumberOrZero | read-only | current |
| ieee8021PbIiInternalPortType OBJECT-TYPE The port type of the internal port on the primary S-VLAN component. This indicates the type of RCSI as follows: providerNetworkPort(3) - Indicates a PNP (not an RCSI) customerNetworkPort(4) - Indicates a Port-based RCSI customerEdgePort(5) - Indicates a C-tagged RCSI Other port type values are not valid for this field. | 1.3.111.2.802.1.1.5.1.9.1.3 | IEEE8021BridgePortType | read-create | current |
| ieee8021PbIiInternalSVid OBJECT-TYPE Internal S-VID for this external S-VID entry. | 1.3.111.2.802.1.1.5.1.9.1.4 | VlanIdOrNone | read-create | current |
| ieee8021PbIiRowStatus OBJECT-TYPE This indicates the status of an entry in this table, and is used to create/delete entries. The value of ieee8021PbIiExternalSVid must be set before an entry in this table can be made valid.deprecated It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1). | 1.3.111.2.802.1.1.5.1.9.1.5 | RowStatus | read-create | current |
| ieee8021PbConformance OBJECT-IDENTITY | 1.3.111.2.802.1.1.5.2 | |||
| ieee8021PbGroups OBJECT-IDENTITY | 1.3.111.2.802.1.1.5.2.1 | |||
| ieee8021PbCompliances OBJECT-IDENTITY | 1.3.111.2.802.1.1.5.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ieee8021PbVidTranslationGroup OBJECT-GROUP The collection of objects used to represent a PB C-VID/S-VID translation. | 1.3.111.2.802.1.1.5.2.1.1 | deprecated |
| ieee8021PbCVidRegistrationGroup OBJECT-GROUP The collection of objects used to represent a CEP translation. | 1.3.111.2.802.1.1.5.2.1.2 | current |
| ieee8021PbEdgePortGroup OBJECT-GROUP The collection of objects user to represent a PEP. | 1.3.111.2.802.1.1.5.2.1.3 | current |
| ieee8021PbServicePriorityRegenerationGroup OBJECT-GROUP A regenerated priority value for a PEP. | 1.3.111.2.802.1.1.5.2.1.4 | current |
| ieee8021PbDynamicCnpGroup OBJECT-GROUP A set of objects used for dynamic creation and deletion of customer network ports. | 1.3.111.2.802.1.1.5.2.1.5 | current |
| ieee8021PbDynamicPnpGroup OBJECT-GROUP A set of objects used for dynamic creation and deletion of provider network ports. | 1.3.111.2.802.1.1.5.2.1.6 | current |
| ieee8021PbDynamicCepGroup OBJECT-GROUP A set of objects used for dynamic creation and deletion of customer edge ports. | 1.3.111.2.802.1.1.5.2.1.7 | current |
| ieee8021PbDynamicRcapGroup OBJECT-GROUP A set of objects used for dynamic creation and deletion of remote customer access ports. | 1.3.111.2.802.1.1.5.2.1.8 | deprecated |
| ieee8021PbInternalInterfaceGroup OBJECT-GROUP A set of objects used for dynamic creation and deletion of internal interfaces on a Port-mapping S-VLAN component. | 1.3.111.2.802.1.1.5.2.1.9 | current |
| ieee8021PbDynamicRcapV2Group OBJECT-GROUP A set of objects used for dynamic creation and deletion of remote customer access ports. | 1.3.111.2.802.1.1.5.2.1.10 | current |
| ieee8021PbCompliance MODULE-COMPLIANCE The compliance statement for device support of Provider Bridge services. | 1.3.111.2.802.1.1.5.2.2.1 | deprecated |
| ieee8021PbComplianceV2 MODULE-COMPLIANCE The compliance statement for device support of Provider Bridge services. | 1.3.111.2.802.1.1.5.2.2.2 | current |