IEEE8021-EVBB-MIB
- Registered at
- 1.3.111.2.802.1.1.100
- Last updated
- 2010-10-25 00:00
- Organization
- IEEE 802.1 Working Group
- Revisions
- 2010-10-25 00:00
- Namespace
- standard
- Source file
IEEE8021-EVBB-MIB- Digest
sha256:1d18d1cb49b6bdc259e786ec6194012694ceff82c6d105ac45cf3d2a286521af
Description
The EVB MIB module for managing devices that support Ethernet Virtual Bridging. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2010. Copyright (C) IEEE. This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
Contact
WG-URL: http://grouper.ieee.org/groups/802/1/index.html WG-EMail: stds-802-1@ieee.org Contact: <TBD> Postal: C/O IEEE 802.1 Working Group IEEE Standards Association 445 Hoes Lane P.O. Box 1331 Piscataway NJ 08855-1331 USA E-mail: STDS-802-1-L@LISTSERV.IEEE.ORG
Imports
| From | Symbols |
|---|---|
| IEEE8021-TC-MIB | IEEE8021BridgePortNumber, IEEE8021BridgePortNumberOrZero, IEEE8021PbbComponentIdentifier, IEEE8021PbbComponentIdentifierOrZero, ieee802dot1mibs |
| Q-BRIDGE-MIB | VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANAifType-MIB IEEE8021-EVBB-MIB IEEE8021-TC-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| IEEE8021BridgeEvbTLVTC TEXTUAL-CONVENTION EVB TLV structure. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ieee8021BridgeEvbNotifications OBJECT-IDENTITY | 1.3.111.2.802.1.1.100.0 | |||
| ieee8021BridgeEvbObjects OBJECT-IDENTITY | 1.3.111.2.802.1.1.100.1 | |||
| ieee8021BridgeEvbConfig OBJECT-IDENTITY | 1.3.111.2.802.1.1.100.1.1 | |||
| ieee8021BridgeEvbSysMACAddress OBJECT-TYPE The evbSysMACAddress is any single MAC which uniquely identifies the system. This MAC may be chosen to be one of the MAC used to identify each component of the system | 1.3.111.2.802.1.1.100.1.1.1 | MacAddress | read-only | current |
| ieee8021BridgeEvbSysName OBJECT-TYPE The evbSysName is a string which may to set by management to identify this system. | 1.3.111.2.802.1.1.100.1.1.2 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| ieee8021BridgeEvbSysType OBJECT-TYPE The evbSysType determines if this is an EVB Bridge or EVB station. | 1.3.111.2.802.1.1.100.1.1.3 | INTEGER {evbBridge(1), evbStation(2)} | read-only | current |
| ieee8021BridgeEvbSysNumExternalPorts OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.1.4 | Unsigned32 (1..4095) | read-only | current |
| ieee8021BridgeEvbSysEvbLldpEnables OBJECT-TYPE This object is used to initialize the S-Channel interface table entry. | 1.3.111.2.802.1.1.100.1.1.5 | Bits {evbTLVEnable(0), autoEvbLLDPTLV(1)} | read-write | current |
| ieee8021BridgeEvbSysEvbLldpDfltMode OBJECT-TYPE The value of this object is used as the initial value for the ieee8021BridgeEvbCAPLldpAdminCap. | 1.3.111.2.802.1.1.100.1.1.6 | IEEE8021BridgeEvbTLVTC | read-write | current |
| ieee8021BridgeEvbSysEvbLldpNumVsisSup OBJECT-TYPE This is the total number of VSIs which this system may support and is used to fill out the EVB TLV field for Number VSIs Supported | 1.3.111.2.802.1.1.100.1.1.7 | Unsigned32 | read-write | current |
| ieee8021BridgeEvbSysNumCorErComps OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.1.8 | Unsigned32 | read-only | current |
| ieee8021BridgeEvbSysNumSComps OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.1.9 | Unsigned32 | read-only | current |
| ieee8021BridgeEvbECPACkTimer OBJECT-TYPE A value indicating the Bridge Proposed ECP ackTimer. | 1.3.111.2.802.1.1.100.1.1.10 | Integer32 | read-write | current |
| ieee8021BridgeEvbECPMaxRetires OBJECT-TYPE A value indicating the Bridge ECP maxRetries. | 1.3.111.2.802.1.1.100.1.1.11 | Integer32 (0..7) | read-write | current |
| ieee8021BridgeEvbSysVdpDfltRsrcWaitDelay OBJECT-TYPE A value indicating the Bridge Resource VDP Timeout. | 1.3.111.2.802.1.1.100.1.1.12 | Integer32 | read-write | current |
| ieee8021BridgeEvbSysVdpDfltReinitKeepAlive OBJECT-TYPE A value indicating the Bridge Proposed VDP Keep Alive Timeout. | 1.3.111.2.802.1.1.100.1.1.13 | Integer32 | read-write | current |
| ieee8021BridgeEvbPhyPortTable OBJECT-TYPE A table that contains . | 1.3.111.2.802.1.1.100.1.1.14 | not-accessible | current | |
| ieee8021BridgeEvbPhyPortEntry OBJECT-TYPE A list of objects containing EVB port type objects. Creation of an entry in this table will implicitly also create a corresponding entry in the ieee8021BridgeBasePortTable. | 1.3.111.2.802.1.1.100.1.1.14.1 | not-accessible | current | |
| ieee8021BridgeEvbPhyPort OBJECT-TYPE The external port. | 1.3.111.2.802.1.1.100.1.1.14.1.1 | IEEE8021BridgePortNumber | not-accessible | current |
| ieee8021BridgeEvbPhyPortMacAddress OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.1.14.1.2 | MacAddress | read-only | current |
| ieee8021BridgeEvbPhyPortTypeCap OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.1.14.1.3 | Bits {customerVlanPort(0), providerNetworkPort(1), customerNetworkPort(2), customerEdgePort(3), customerBackbonePort(4), virtualInstancePort(5), dBridgePort(6), serverEdgePort(7)} | read-only | current |
| ieee8021BridgeEvbPhyPortType OBJECT-TYPE The port type for this portIndex. | 1.3.111.2.802.1.1.100.1.1.14.1.4 | INTEGER {customerVlanPort(1), uplinkAccessPort(2)} | read-write | current |
| ieee8021BridgeEvbPhyPortToComponentId OBJECT-TYPE The component ID that this EVB port belongs to. | 1.3.111.2.802.1.1.100.1.1.14.1.5 | IEEE8021PbbComponentIdentifierOrZero | read-write | current |
| ieee8021BridgeEvbPhyPortToInternalPort OBJECT-TYPE The internal port number to which this externel/physical port maps to. | 1.3.111.2.802.1.1.100.1.1.14.1.6 | IEEE8021BridgePortNumberOrZero | read-write | current |
| ieee8021BridgeEvbPortTable OBJECT-TYPE A table that contains . | 1.3.111.2.802.1.1.100.1.1.15 | not-accessible | current | |
| ieee8021BridgeEvbPortEntry OBJECT-TYPE A list of objects containing EVB port type objects. Creation of an entry in this table will implicitly also create a corresponding entry in the ieee8021BridgeBasePortTable. | 1.3.111.2.802.1.1.100.1.1.15.1 | not-accessible | current | |
| ieee8021BridgeEvbPortComponentId OBJECT-TYPE The component ID that this EVB port belongs to. | 1.3.111.2.802.1.1.100.1.1.15.1.1 | IEEE8021PbbComponentIdentifierOrZero | not-accessible | current |
| ieee8021BridgeEvbPort OBJECT-TYPE The port number of the port for which this entry contains EVB management information. | 1.3.111.2.802.1.1.100.1.1.15.1.2 | IEEE8021BridgePortNumber | not-accessible | current |
| ieee8021BridgeEvbPortType OBJECT-TYPE The port type for this portIndex. | 1.3.111.2.802.1.1.100.1.1.15.1.3 | INTEGER {cVlanBridgePort(1), stationFacingBridgePort(2), uplinkAccessPort(3), sChannelAccessPort(4), uplinkRelayPort(5), edgeRelayPort(6)} | read-create | current |
| ieee8021BridgeEvbPortRowStatus OBJECT-TYPE RowStatus for this table. | 1.3.111.2.802.1.1.100.1.1.15.1.4 | RowStatus | read-create | current |
| ieee8021BridgeEvbVSIDBObjects OBJECT-IDENTITY | 1.3.111.2.802.1.1.100.1.2 | |||
| ieee8021BridgeEvbVSIDBTable OBJECT-TYPE A table that contains database of the active Virtual Station Interfaces. | 1.3.111.2.802.1.1.100.1.2.1 | not-accessible | current | |
| ieee8021BridgeEvbVSIDBEntry OBJECT-TYPE A list of objects containing database of the active Virtual Station Interfaces. | 1.3.111.2.802.1.1.100.1.2.1.1 | not-accessible | current | |
| ieee8021BridgeEvbVsiSvid OBJECT-TYPE The Svid to identify the S-Channel interface. | 1.3.111.2.802.1.1.100.1.2.1.1.1 | Unsigned32 (1..4095) | not-accessible | current |
| ieee8021BridgeEvbVSIID OBJECT-TYPE This object specifies the VSIID that uniquely identifies the VSI in the DCN | 1.3.111.2.802.1.1.100.1.2.1.1.2 | OCTET STRING (SIZE(16)) | not-accessible | current |
| ieee8021BridgeEvbVSIComponentID OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.2.1.1.3 | IEEE8021PbbComponentIdentifier | read-only | current |
| ieee8021BridgeEvbVSIPortNumber OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.2.1.1.4 | IEEE8021BridgePortNumber | read-only | current |
| ieee8021BridgeEvbVSITimeSinceCreate OBJECT-TYPE This object specifies the time since creation | 1.3.111.2.802.1.1.100.1.2.1.1.5 | TimeInterval | read-only | current |
| ieee8021BridgeEvbVsiVdpOperCmd OBJECT-TYPE This object identifies the type of TLV. | 1.3.111.2.802.1.1.100.1.2.1.1.6 | INTEGER {preAssociate(1), preAssociateWithRsrcReservation(2), associate(3), deAssociate(4)} | read-only | current |
| ieee8021BridgeEvbVsiOperRevert OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.2.1.1.7 | TruthValue | read-only | current |
| ieee8021BridgeEvbVsiOperHard OBJECT-TYPE TBD | 1.3.111.2.802.1.1.100.1.2.1.1.8 | TruthValue | read-only | current |
| ieee8021BridgeEvbVsiOperReason OBJECT-TYPE This object indicates the outcome of a request. | 1.3.111.2.802.1.1.100.1.2.1.1.9 | Bits {success(0), invalidFormat(1), insufficientResources(2), otherfailure(3)} | read-only | current |
| ieee8021BridgeEvbVSIMgrID OBJECT-TYPE This object identifies the VSI Manager with a database that holds the detailed VSI type and or instance definitions. | 1.3.111.2.802.1.1.100.1.2.1.1.10 | OCTET STRING (SIZE(1)) | read-only | current |
| ieee8021BridgeEvbVSIType OBJECT-TYPE The VTID is an integer value used to identify a pre-configured set of controls and attributes that are associated with a set of VSIs. | 1.3.111.2.802.1.1.100.1.2.1.1.11 | OCTET STRING (SIZE(3)) | read-only | current |
| ieee8021BridgeEvbVSITypeVersion OBJECT-TYPE The VSI Type Version is an integer identifier designating the expected/desired VTID version. The VTID version allows a VSI Manager Database to contain multiple versions of a given VSI Type, allowing smooth migration to newer VSI types. | 1.3.111.2.802.1.1.100.1.2.1.1.12 | OCTET STRING (SIZE(1)) | read-only | current |
| ieee8021BridgeEvbVSIMvFormat OBJECT-TYPE This object specifies the MAC/VLAN format. basic - Basic MAC/VLAN format partial - Partial MAC/VLAN format vlanOnly - Vlan-only MAC/VLAN format | 1.3.111.2.802.1.1.100.1.2.1.1.13 | INTEGER {basic(0), partial(1), vlanOnly(2)} | read-only | current |
| ieee8021BridgeEvbVSINumMACs OBJECT-TYPE This object specifies the the number of MAC address/VLAN ID pairs contained in the repeated protion of the MAC/VLANs field in the VDP TLV. | 1.3.111.2.802.1.1.100.1.2.1.1.14 | Integer32 | read-only | current |
| ieee8021BridgeEvbVDPMachineState OBJECT-TYPE This object specifies the VDP state machine. | 1.3.111.2.802.1.1.100.1.2.1.1.15 | INTEGER {preAssociate(1), preAssociateWithRsrcReservation(2), associate(3), deAssociate(4)} | read-only | current |
| ieee8021BridgeEvbVDPCommandsSucceeded OBJECT-TYPE This object specifies the VDP number of successful commands since creation. | 1.3.111.2.802.1.1.100.1.2.1.1.16 | Counter32 | read-only | current |
| ieee8021BridgeEvbVDPCommandsFailed OBJECT-TYPE This object specifies the VDP number of failed commands since creation | 1.3.111.2.802.1.1.100.1.2.1.1.17 | Counter32 | read-only | current |
| ieee8021BridgeEvbVDPCommandReverts OBJECT-TYPE This object specifies the VDP command reverts since creation | 1.3.111.2.802.1.1.100.1.2.1.1.18 | Counter32 | read-only | current |
| ieee8021BridgeEvbVSIDBMacTable OBJECT-TYPE A table that contains database of the active Virtual Station Interfaces. | 1.3.111.2.802.1.1.100.1.2.2 | not-accessible | current | |
| ieee8021BridgeEvbVSIDBMacEntry OBJECT-TYPE A list of objects containing database of the MAC/VLANs associated with Virtual Station Interfaces. | 1.3.111.2.802.1.1.100.1.2.2.1 | not-accessible | current | |
| ieee8021BridgeEvbGroupID OBJECT-TYPE Group ID | 1.3.111.2.802.1.1.100.1.2.2.1.1 | Unsigned32 | not-accessible | current |
| ieee8021BridgeEvbVSIMac OBJECT-TYPE The mac-address part of the MAC/VLANs for a VSI. | 1.3.111.2.802.1.1.100.1.2.2.1.2 | MacAddress | not-accessible | current |
| ieee8021BridgeEvbVSIVlanId OBJECT-TYPE The Vlan ID part of the MAC/VLANs for a VSI. | 1.3.111.2.802.1.1.100.1.2.2.1.3 | VlanIndex | read-only | current |
| ieee8021BridgeEvbSChannelObjects OBJECT-IDENTITY | 1.3.111.2.802.1.1.100.1.4 | |||
| ieee8021BridgeEvbUAPConfigTable OBJECT-TYPE A table that contains configuration parameters for UAP. | 1.3.111.2.802.1.1.100.1.4.1 | not-accessible | current | |
| ieee8021BridgeEvbUAPConfigEntry OBJECT-TYPE A list of objects containing information to configure the attributes for UAP. | 1.3.111.2.802.1.1.100.1.4.1.1 | not-accessible | current | |
| ieee8021BridgeEvbUAPComponentId OBJECT-TYPE The ComponentID of the port for the UAP. | 1.3.111.2.802.1.1.100.1.4.1.1.1 | IEEE8021PbbComponentIdentifier | read-only | current |
| ieee8021BridgeEvbUAPPort OBJECT-TYPE The port number of the port for the UAP. | 1.3.111.2.802.1.1.100.1.4.1.1.2 | IEEE8021BridgePortNumber | read-only | current |
| ieee8021BridgeEvbUAPSchCdcpAdminEnable OBJECT-TYPE Administrative staus of CDCP. | 1.3.111.2.802.1.1.100.1.4.1.1.3 | INTEGER {enable(1), disable(2)} | read-create | current |
| ieee8021BridgeEvbUAPSchAdminCDCPRole OBJECT-TYPE The administratively configured value for the local port's role parameter. The value of AdminRole is not reflected in the S-channel TLV. The AdminRole may take the value S or B. S indicates the sender is unwilling to accept S-channels configuration (mode, # channels supported, channel index) from its neighbor and that the sender is willing to accept SVID assignments from the neighbor. Stations usually take the S role.B indicates the sender is willing to accept S-channels configuration (mode, # channels supported, channel index) from its neighbor and that the sender is willing do the best it can to fill the SVID assignments from the neighbor. Bridges usually take the B role. | 1.3.111.2.802.1.1.100.1.4.1.1.4 | INTEGER {cdcpRoleB(1), cdcpRoleS(2)} | read-create | current |
| ieee8021BridgeEvbUAPSchAdminCDCPChanCap OBJECT-TYPE The administratively configured value for the Number of Channels supported parameter. This value is included as the ChnCap parameter in the S-channel TLV. | 1.3.111.2.802.1.1.100.1.4.1.1.5 | Integer32 (1..167) | read-create | current |
| ieee8021BridgeEvbUAPSchOperCDCPChanCap OBJECT-TYPE The operational value for the Number of Channels supported parameter. This value is included as the ChnCap parameter in the S-channel TLV. | 1.3.111.2.802.1.1.100.1.4.1.1.6 | Integer32 (1..167) | read-only | current |
| ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolLow OBJECT-TYPE Determines the lowest S-VIDs available for assignment by CDCP. | 1.3.111.2.802.1.1.100.1.4.1.1.7 | VlanIndex | read-create | current |
| ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolHigh OBJECT-TYPE Determines the highest S-VIDs available for assignment by CDCP. | 1.3.111.2.802.1.1.100.1.4.1.1.8 | VlanIndex | read-create | current |
| ieee8021BridgeEvbUAPSchOperState OBJECT-TYPE The current runnning state of CDCP. | 1.3.111.2.802.1.1.100.1.4.1.1.9 | INTEGER {running(1), notRunning(2)} | read-only | current |
| ieee8021BridgeEvbSchCdcpRemoteEnabled OBJECT-TYPE CDCP state for the remote S-channel. | 1.3.111.2.802.1.1.100.1.4.1.1.10 | INTEGER {enable(1), disable(2)} | read-only | current |
| ieee8021BridgeEvbSchCdcpRemoteRole OBJECT-TYPE The value for the remote port's role parameter. | 1.3.111.2.802.1.1.100.1.4.1.1.11 | INTEGER {cdcpRoleB(1), cdcpRoleS(2)} | read-only | current |
| ieee8021BridgeEvbUAPConfigRowStatus OBJECT-TYPE RowStatus for creating a UAP table entry. | 1.3.111.2.802.1.1.100.1.4.1.1.12 | RowStatus | read-create | current |
| ieee8021BridgeEvbCAPConfigTable OBJECT-TYPE A table that contains configuration information for the S-Channel Access Ports (CAP). | 1.3.111.2.802.1.1.100.1.4.2 | not-accessible | current | |
| ieee8021BridgeEvbCAPConfigEntry OBJECT-TYPE A list of objects containing information for the S-Channel Access Ports (CAP) | 1.3.111.2.802.1.1.100.1.4.2.1 | not-accessible | current | |
| ieee8021BridgeEvbCAPComponentId OBJECT-TYPE Component ID for S-channel Access Port. | 1.3.111.2.802.1.1.100.1.4.2.1.1 | IEEE8021PbbComponentIdentifier | read-only | current |
| ieee8021BridgeEvbCAPPort OBJECT-TYPE Port number for the S-Channel Access Port. | 1.3.111.2.802.1.1.100.1.4.2.1.2 | IEEE8021BridgePortNumber | read-only | current |
| ieee8021BridgeEvbCAPSChannelID OBJECT-TYPE S-Channel ID (SCID) for this CAP. | 1.3.111.2.802.1.1.100.1.4.2.1.3 | Integer32 | read-only | current |
| ieee8021BridgeEvbCAPAssociateSBPCompID OBJECT-TYPE Component ID of the Server Edge Port to be associated with the CAP. | 1.3.111.2.802.1.1.100.1.4.2.1.6 | IEEE8021PbbComponentIdentifier | read-write | current |
| ieee8021BridgeEvbCAPAssociateSBPPort OBJECT-TYPE Port number of the Server Edge Port to be associated with the CAP. | 1.3.111.2.802.1.1.100.1.4.2.1.7 | IEEE8021BridgePortNumber | read-write | current |
| ieee8021BridgeEvbCAPLldpAdminEnables OBJECT-TYPE To use manual or auto configuration for EVB LLDP TLV. In manual operation the system may exchange the EVB TLV however does not use the information supplied to set the operating parameters for RR, ECP and VDP.The default value for the ieee8021BridgeEvbSysEvbLldpEnables is LLDP on and manual off. | 1.3.111.2.802.1.1.100.1.4.2.1.8 | Bits {evbTLVEnable(0), autoEvbLLDPTLV(1)} | read-create | current |
| ieee8021BridgeEvbCAPLldpAdminCap OBJECT-TYPE EVB current configured capabilities. | 1.3.111.2.802.1.1.100.1.4.2.1.9 | IEEE8021BridgeEvbTLVTC | read-create | current |
| ieee8021BridgeEvbCAPLldpOperMode OBJECT-TYPE EVB current operational capabilities. | 1.3.111.2.802.1.1.100.1.4.2.1.10 | IEEE8021BridgeEvbTLVTC | read-only | current |
| ieee8021BridgeEvbCAPEcpAdminAckTimerInit OBJECT-TYPE The initial value used to initialize ackTimer (44.3.6.1). | 1.3.111.2.802.1.1.100.1.4.2.1.11 | TimeInterval | read-create | current |
| ieee8021BridgeEvbCAPEcpOperAckTimerInit OBJECT-TYPE The initial value used to initialize ackTimer (44.3.6.1). | 1.3.111.2.802.1.1.100.1.4.2.1.12 | TimeInterval | read-only | current |
| ieee8021BridgeEvbCAPEcpAdminMaxTries OBJECT-TYPE This integer variable defines the maximum number of times that the ECP transmit state machine will retry a transmission if no ACK is received. | 1.3.111.2.802.1.1.100.1.4.2.1.13 | Unsigned32 (0..16) | read-create | current |
| ieee8021BridgeEvbCAPEcpOperMaxRetries OBJECT-TYPE This integer variable defines the maximum number of times that the ECP transmit state machine will retry a transmission if no ACK is received. | 1.3.111.2.802.1.1.100.1.4.2.1.14 | Unsigned32 (0..15) | read-only | current |
| ieee8021BridgeEvbCAPEcpTxFrameCount OBJECT-TYPE TBD. | 1.3.111.2.802.1.1.100.1.4.2.1.15 | Counter32 | read-only | current |
| ieee8021BridgeEvbCAPEcpTxRetryCount OBJECT-TYPE TBD. | 1.3.111.2.802.1.1.100.1.4.2.1.16 | Counter32 | read-only | current |
| ieee8021BridgeEvbCAPEcpTxFailures OBJECT-TYPE TBD. | 1.3.111.2.802.1.1.100.1.4.2.1.17 | Counter32 | read-only | current |
| ieee8021BridgeEvbCAPEcpRxFrameCount OBJECT-TYPE TBD. | 1.3.111.2.802.1.1.100.1.4.2.1.18 | Counter32 | read-only | current |
| ieee8021BridgeEvbCAPVdpOperRsrcWaitDelay OBJECT-TYPE The value used to initialize the waitWhile timer (42.2.5.1) by the EVBCB VDP state machine when the state machine is waiting for a response. | 1.3.111.2.802.1.1.100.1.4.2.1.19 | TimeInterval | read-create | current |
| ieee8021BridgeEvbCAPVdpOperRespWaitDelay OBJECT-TYPE The value used to initialize the waitWhile timer (42.2.5.1) by the station VDP state machine when the state machine is waiting for a response. | 1.3.111.2.802.1.1.100.1.4.2.1.20 | TimeInterval | read-create | current |
| ieee8021BridgeEvbCAPVdpOperReinitKeepAlive OBJECT-TYPE The value used to initialize the waitWhile timer (42.2.5.1) by the station VDP state machine in order to determine when to transmit a keep alive message. | 1.3.111.2.802.1.1.100.1.4.2.1.21 | TimeInterval | read-create | current |
| ieee8021BridgeEvbCAPVdpOperToutKeepAlive OBJECT-TYPE The value used to initialize the waitWhile timer (42.2.5.1) by the EVBCB VDP state machine n order to determine when to transmit a keep alive message. | 1.3.111.2.802.1.1.100.1.4.2.1.22 | TimeInterval | read-create | current |
| ieee8021BridgeEvbCAPRowStatus OBJECT-TYPE RowStatus to create/destroy this table. | 1.3.111.2.802.1.1.100.1.4.2.1.23 | RowStatus | read-create | current |
| ieee8021BridgeEvbConformance OBJECT-IDENTITY | 1.3.111.2.802.1.1.100.2 | |||
| ieee8021BridgeEvbGroups OBJECT-IDENTITY | 1.3.111.2.802.1.1.100.2.1 | |||
| ieee8021BridgeEvbCompliances OBJECT-IDENTITY | 1.3.111.2.802.1.1.100.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ieee8021BridgeEvbConfigGroup OBJECT-GROUP The collection of objects used to represent a EVB management objects. | 1.3.111.2.802.1.1.100.2.1.1 | current |
| ieee8021BridgeEvbPhyPortGroup OBJECT-GROUP The collection of objects used to represent external ports. | 1.3.111.2.802.1.1.100.2.1.2 | current |
| ieee8021BridgeEvbPortGroup OBJECT-GROUP The collection of objects used to represent a EVB management objects. | 1.3.111.2.802.1.1.100.2.1.3 | current |
| ieee8021BridgeEvbVSIDBGroup OBJECT-GROUP The collection of objects used to represent a EVB VSI DB table. | 1.3.111.2.802.1.1.100.2.1.4 | current |
| ieee8021BridgeEvbUAPGroup OBJECT-GROUP The collection of objects used to represent a EVB UAP table. | 1.3.111.2.802.1.1.100.2.1.5 | current |
| ieee8021BridgeEvbCAPConfigGroup OBJECT-GROUP The collection of objects used to represent a EVB CAP management objects. | 1.3.111.2.802.1.1.100.2.1.6 | current |
| ieee8021BridgeEvbbCAPConfigGroup OBJECT-GROUP The collection of objects used to represent a EVBB CAP management objects. | 1.3.111.2.802.1.1.100.2.1.7 | current |
| ieee8021BridgeEvbsCAPConfigGroup OBJECT-GROUP The collection of objects used to represent a EVBS CAP management objects. | 1.3.111.2.802.1.1.100.2.1.8 | current |
| ieee8021BridgeEvbbCompliance MODULE-COMPLIANCE The compliance statement for devices supporting EVBB as defined in IEEE 802.1Qbg. | 1.3.111.2.802.1.1.100.2.2.1 | current |
| ieee8021BridgeEvbsCompliance MODULE-COMPLIANCE The compliance statement for devices supporting EVBS as defined in IEEE 802.1Qbg. | 1.3.111.2.802.1.1.100.2.2.2 | current |