MIBs Depot

IEEE8021-EVB-MIB

Registered at
1.3.111.2.802.1.1.24
Last updated
2022-11-08 00:00
Organization
IEEE 802.1 Working Group
Revisions
2022-11-08 00:00, 2018-07-01 00:00, 2014-12-15 00:00, 2012-02-15 00:00
Namespace
standard
Source file
IEEE8021-EVB-MIB
Digest
sha256:0e88e92ad03af035e5d389f6909e9f4a889ee3f8d6f540c68cd1005f1a50496d

Description

The EVB MIB module for managing devices that support Edge Virtual Bridging. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2022. Copyright (C) IEEE (2022). This version of this MIB module is part of IEEE Std 802.1Q; see that standard for full legal notices.

Contact

WG-URL: http://www.ieee802.org/1/ WG-EMail: stds-802-1-l@ieee.org Contact: IEEE 802.1 Working Group Chair Postal: C/O IEEE 802.1 Working Group IEEE Standards Association 445 Hoes Lane Piscataway, NJ 08854 USA E-mail: stds-802-1-chairs@ieee.org

Imports

FromSymbols
IEEE8021-BRIDGE-MIBieee8021BridgePhyPort
IEEE8021-TC-MIBIEEE8021BridgePortNumber, IEEE8021PbbComponentIdentifier, ieee802dot1mibs
IF-MIBInterfaceIndexOrZero
Q-BRIDGE-MIBVlanIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
IANAifType-MIB
IEEE8021-BRIDGE-MIB
IEEE8021-EVB-MIB
IEEE8021-TC-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Objects

NameOIDSyntaxAccessStatus
ieee8021BridgeEvbNotifications
OBJECT-IDENTITY
1.3.111.2.802.1.1.24.0
ieee8021BridgeEvbObjects
OBJECT-IDENTITY
1.3.111.2.802.1.1.24.1
ieee8021BridgeEvbSys
OBJECT-IDENTITY
1.3.111.2.802.1.1.24.1.1
ieee8021BridgeEvbSysType
OBJECT-TYPE
The evbSysType determines if this is an EVB Bridge or EVB station.
1.3.111.2.802.1.1.24.1.1.1INTEGER {evbBridge(1), evbStation(2)}read-onlycurrent
ieee8021BridgeEvbSysNumExternalPorts
OBJECT-TYPE
The evbSysNumExternalPorts parameter indicates how many externally accessible port are available.
1.3.111.2.802.1.1.24.1.1.2Unsigned32 (1..4095)read-onlycurrent
ieee8021BridgeEvbSysEvbLldpTxEnable
OBJECT-TYPE
This object is used to initialize the LLDP EVB objects for new SBPs and URPS. When set to 'true' a new SBP or URP will place the local EVB objects in the LLDP nearest Customer database; when set to 'false' a new SBP or URP will not place the local EVB objects in the LLDP database.
1.3.111.2.802.1.1.24.1.1.3TruthValueread-writecurrent
ieee8021BridgeEvbSysEvbLldpManual
OBJECT-TYPE
This object is used to initialize the LLDP EVB objects for new SBPs and URPS. When set to 'false' the operating configuration will be determined by the comparison between the local and remote LLDP EVB objects (automatic), regardless of the setting of ieee8021BridgeEvbSysLldpTxEnable. When ieee8021BridgeEvbSysLldpManual is 'true' the configuration will be determined by the setting of the local EVB objects only (manual).
1.3.111.2.802.1.1.24.1.1.4TruthValueread-writecurrent
ieee8021BridgeEvbSysEvbLldpGidCapable
OBJECT-TYPE
The value of this object is used as the default value of the BGID or SGID bit of the EVB LLDP TLV string.
1.3.111.2.802.1.1.24.1.1.5TruthValueread-writecurrent
ieee8021BridgeEvbSysEcpAckTimer
OBJECT-TYPE
A value indicating the Bridge Proposed ECP ackTimer.
1.3.111.2.802.1.1.24.1.1.6Integer32read-writedeprecated
ieee8021BridgeEvbSysEcpMaxRetries
OBJECT-TYPE
A value indicating the Bridge ECP maxRetries.
1.3.111.2.802.1.1.24.1.1.7Integer32 (0..7)read-writecurrent
ieee8021BridgeEvbSysVdpDfltRsrcWaitDelay
OBJECT-TYPE
A value indicating the Bridge Resource VDP Timeout.
1.3.111.2.802.1.1.24.1.1.8Integer32read-writedeprecated
ieee8021BridgeEvbSysVdpDfltReinitKeepAlive
OBJECT-TYPE
A value indicating the Bridge Proposed VDP Keep Alive Timeout.
1.3.111.2.802.1.1.24.1.1.9Integer32read-writedeprecated
ieee8021BridgeEvbSbpTable
OBJECT-TYPE
A table that contains Station-facing Bridge Port (SBP) details.
1.3.111.2.802.1.1.24.1.1.10not-accessiblecurrent
ieee8021BridgeEvbSbpEntry
OBJECT-TYPE
A list of objects describing SBP.
1.3.111.2.802.1.1.24.1.1.10.1not-accessiblecurrent
ieee8021BridgeEvbSbpComponentID
OBJECT-TYPE
The SBP component ID
1.3.111.2.802.1.1.24.1.1.10.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021BridgeEvbSbpPortNumber
OBJECT-TYPE
The SBP port number.
1.3.111.2.802.1.1.24.1.1.10.1.2IEEE8021BridgePortNumbernot-accessiblecurrent
ieee8021BridgeEvbSbpLldpManual
OBJECT-TYPE
The evbSbpLldpManual parameter switches EVB TLVs to manual mode. In manual mode the running parameters are determined solely from the local LLDP database values.
1.3.111.2.802.1.1.24.1.1.10.1.3TruthValueread-writecurrent
ieee8021BridgeEvbSbpVdpOperRsrcWaitDelay
OBJECT-TYPE
The value used to initialize the waitWhile timer (41.5.5.7) by the station VDP state machine when the state machine is waiting for a response.
1.3.111.2.802.1.1.24.1.1.10.1.4Unsigned32read-onlydeprecated
ieee8021BridgeEvbSbpVdpOperReinitKeepAlive
OBJECT-TYPE
The value used to initialize the waitWhile timer (41.5.5.5) by the station VDP state machine in order to determine when to transmit a keep alive message.
1.3.111.2.802.1.1.24.1.1.10.1.5Unsigned32read-onlydeprecated
ieee8021BridgeEvbSbpVdpOperToutKeepAlive
OBJECT-TYPE
The value used to initialize the waitWhile timer (41.5.5.13) by the EVBCB VDP state machine in order to determine when to transmit a keep alive message.
1.3.111.2.802.1.1.24.1.1.10.1.6Unsigned32read-onlycurrent
ieee8021BridgeEvbSbpVdpOperRsrcWaitDelayExp
OBJECT-TYPE
The exponent of 2 used to calculate the value to initialize the waitWhile timer (41.5.5.7) by the station VDP state machine when the state machine is waiting for a response.
1.3.111.2.802.1.1.24.1.1.10.1.7Unsigned32 (0..31)read-onlycurrent
ieee8021BridgeEvbSbpVdpOperReinitKeepAliveExp
OBJECT-TYPE
The exponent of 2 used to calculate the value to initialize the waitWhile timer (41.5.5.5) by the station VDP state machine in order to determine when to transmit a keep alive message.
1.3.111.2.802.1.1.24.1.1.10.1.8Unsigned32 (0..31)read-onlycurrent
ieee8021BridgeEvbSysEcpDfltAckTimerExp
OBJECT-TYPE
The exponent of 2 indicating the Bridge Proposed ECP ackTimer in tens of microseconds.
1.3.111.2.802.1.1.24.1.1.11Integer32 (0..31)read-writecurrent
ieee8021BridgeEvbSysVdpDfltRsrcWaitDelayExp
OBJECT-TYPE
The exponent of 2 indicating the Bridge Resource VDP Timeout in tens of microseconds.
1.3.111.2.802.1.1.24.1.1.12Integer32 (0..31)read-writecurrent
ieee8021BridgeEvbSysVdpDfltReinitKeepAliveExp
OBJECT-TYPE
The exponent of 2 indicating the Bridge Proposed VDP Keep Alive Timeout in tens of microseconds.
1.3.111.2.802.1.1.24.1.1.13Integer32 (0..31)read-writecurrent
ieee8021BridgeEvbVSIDBObjects
OBJECT-IDENTITY
1.3.111.2.802.1.1.24.1.2
ieee8021BridgeEvbVSIDBTable
OBJECT-TYPE
A table that contains database of the active Virtual Station Interfaces.
1.3.111.2.802.1.1.24.1.2.1not-accessiblecurrent
ieee8021BridgeEvbVSIDBEntry
OBJECT-TYPE
A list of objects containing database of the active Virtual Station Interfaces.
1.3.111.2.802.1.1.24.1.2.1.1not-accessiblecurrent
ieee8021BridgeEvbVSIComponentID
OBJECT-TYPE
The evbVSIComponentID is the ComponentID for the C-VLAN component of the EVB Bridge or for the edge relay of the EVB station.
1.3.111.2.802.1.1.24.1.2.1.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021BridgeEvbVSIPortNumber
OBJECT-TYPE
The evbVSIPortNumber is the Port Number for the SBP or URP where the VSI is accessed.
1.3.111.2.802.1.1.24.1.2.1.1.2IEEE8021BridgePortNumbernot-accessiblecurrent
ieee8021BridgeEvbVSIIDType
OBJECT-TYPE
This object specifies the VSIID Type for the VSIID in the DCN
1.3.111.2.802.1.1.24.1.2.1.1.3INTEGER {vsiidIpv4(1), vsiidIpv6(2), vsiidMAC(3), vsiidLocal(4), vsiidUUID(5)}not-accessiblecurrent
ieee8021BridgeEvbVSIID
OBJECT-TYPE
This object specifies the VSIID that uniquely identifies the VSI in the DCN
1.3.111.2.802.1.1.24.1.2.1.1.4OCTET STRING (SIZE(16))not-accessiblecurrent
ieee8021BridgeEvbVSITimeSinceCreate
OBJECT-TYPE
This object specifies the time since creation
1.3.111.2.802.1.1.24.1.2.1.1.5Unsigned32read-onlycurrent
ieee8021BridgeEvbVsiVdpOperCmd
OBJECT-TYPE
This object identifies the type of TLV.
1.3.111.2.802.1.1.24.1.2.1.1.6INTEGER {preAssociate(1), preAssociateWithRsrcReservation(2), associate(3), deAssociate(4)}read-onlycurrent
ieee8021BridgeEvbVsiOperRevert
OBJECT-TYPE
The evbOperRevert status indicator shows the most recent value of the KEEP indicator from the VDP protocol exchange.
1.3.111.2.802.1.1.24.1.2.1.1.7TruthValueread-onlycurrent
ieee8021BridgeEvbVsiOperHard
OBJECT-TYPE
The evbVsiHard status indicator shows the most recent value of the HARD indicator from the VDP protocol exchange.
1.3.111.2.802.1.1.24.1.2.1.1.8TruthValueread-onlycurrent
ieee8021BridgeEvbVsiOperReason
OBJECT-TYPE
This object indicates the outcome of a request.
1.3.111.2.802.1.1.24.1.2.1.1.9Bits {success(0), invalidFormat(1), insufficientResources(2), otherfailure(3)}read-onlycurrent
ieee8021BridgeEvbVSIMgrID
OBJECT-TYPE
This object identifies the VSI Manager with a database that holds the detailed VSI type and or instance definitions.
1.3.111.2.802.1.1.24.1.2.1.1.10OCTET STRING (SIZE(1))read-onlydeprecated
ieee8021BridgeEvbVSIType
OBJECT-TYPE
The VTID is an integer value used to identify a pre-configured set of controls and attributes that are associated with a set of VSIs.
1.3.111.2.802.1.1.24.1.2.1.1.11Integer32read-onlycurrent
ieee8021BridgeEvbVSITypeVersion
OBJECT-TYPE
The VSI Type Version is an integer identifier designating the expected/desired VTID version. The VTID version allows a VSI Manager Database to contain multiple versions of a given VSI Type, allowing smooth migration to newer VSI types.
1.3.111.2.802.1.1.24.1.2.1.1.12OCTET STRING (SIZE(1))read-onlycurrent
ieee8021BridgeEvbVSIMvFormat
OBJECT-TYPE
This object specifies the MAC/VLAN format. basic - Basic MAC/VLAN format partial - Partial MAC/VLAN format vlanOnly - Vlan-only MAC/VLAN format
1.3.111.2.802.1.1.24.1.2.1.1.13INTEGER {basic(1), partial(2), vlanOnly(3)}read-onlydeprecated
ieee8021BridgeEvbVSINumMACs
OBJECT-TYPE
This object specifies the the number of MAC address/VLAN ID pairs contained in the repeated portion of the MAC/VLANs field in the VDP TLV.
1.3.111.2.802.1.1.24.1.2.1.1.14Integer32read-onlycurrent
ieee8021BridgeEvbVDPMachineState
OBJECT-TYPE
This object specifies the VDP state machine.
1.3.111.2.802.1.1.24.1.2.1.1.15INTEGER {preAssociate(1), preAssociateWithRsrcReservation(2), associate(3), deAssociate(4)}read-onlycurrent
ieee8021BridgeEvbVDPCommandsSucceeded
OBJECT-TYPE
This object specifies the VDP number of successful commands since creation.
1.3.111.2.802.1.1.24.1.2.1.1.16Counter32read-onlycurrent
ieee8021BridgeEvbVDPCommandsFailed
OBJECT-TYPE
This object specifies the VDP number of failed commands since creation
1.3.111.2.802.1.1.24.1.2.1.1.17Counter32read-onlycurrent
ieee8021BridgeEvbVDPCommandReverts
OBJECT-TYPE
This object specifies the VDP command reverts since creation
1.3.111.2.802.1.1.24.1.2.1.1.18Counter32read-onlycurrent
ieee8021BridgeEvbVDPCounterDiscontinuity
OBJECT-TYPE
The time (in hundredths of a second) since the last counter discontinuity for any of the counters in the row.
1.3.111.2.802.1.1.24.1.2.1.1.19TimeTicksread-onlycurrent
ieee8021BridgeEvbVSIMgrID16
OBJECT-TYPE
This object identifies the VSI Manager with a database that holds the detailed VSI type and or instance definitions.
1.3.111.2.802.1.1.24.1.2.1.1.20OCTET STRING (SIZE(16))read-onlycurrent
ieee8021BridgeEvbVSIFilterFormat
OBJECT-TYPE
This object specifies the MAC/VLAN format: vid (see 41.2.9.1) macVid (see 41.2.9.2) groupidVid (see 41.2.9.3) groupidMacVid (see 41.2.9.4)
1.3.111.2.802.1.1.24.1.2.1.1.21INTEGER {vid(1), macVid(2), groupidVid(3), groupidMacVid(4)}read-onlycurrent
ieee8021BridgeEvbVSIDBMacTable
OBJECT-TYPE
A table that contains database of the active Virtual Station Interfaces.
1.3.111.2.802.1.1.24.1.2.2not-accessiblecurrent
ieee8021BridgeEvbVSIDBMacEntry
OBJECT-TYPE
A list of objects containing database of the MAC/VLANs associated with Virtual Station Interfaces.
1.3.111.2.802.1.1.24.1.2.2.1not-accessiblecurrent
ieee8021BridgeEvbGroupID
OBJECT-TYPE
Group ID
1.3.111.2.802.1.1.24.1.2.2.1.1Unsigned32not-accessiblecurrent
ieee8021BridgeEvbVSIMac
OBJECT-TYPE
The mac-address part of the MAC/VLANs for a VSI.
1.3.111.2.802.1.1.24.1.2.2.1.2MacAddressnot-accessiblecurrent
ieee8021BridgeEvbVSIVlanId
OBJECT-TYPE
The Vlan ID part of the MAC/VLANs for a VSI.
1.3.111.2.802.1.1.24.1.2.2.1.3VlanIndexread-onlycurrent
ieee8021BridgeEvbSChannelObjects
OBJECT-IDENTITY
1.3.111.2.802.1.1.24.1.3
ieee8021BridgeEvbUAPConfigTable
OBJECT-TYPE
A table that contains configuration parameters for UAP.
1.3.111.2.802.1.1.24.1.3.1not-accessiblecurrent
ieee8021BridgeEvbUAPConfigEntry
OBJECT-TYPE
A list of objects containing information to configure the attributes for UAP.
1.3.111.2.802.1.1.24.1.3.1.1not-accessiblecurrent
ieee8021BridgeEvbUAPComponentId
OBJECT-TYPE
The ComponentID of the port for the UAP.
1.3.111.2.802.1.1.24.1.3.1.1.1IEEE8021PbbComponentIdentifierread-onlycurrent
ieee8021BridgeEvbUAPPort
OBJECT-TYPE
The port number of the port for the UAP.
1.3.111.2.802.1.1.24.1.3.1.1.2IEEE8021BridgePortNumberread-onlycurrent
ieee8021BridgeEvbUapConfigIfIndex
OBJECT-TYPE
The value of the instance of the IfIndex object, defined in the IF-MIB, for the interface corresponding to this port, or the value 0 if the port has not been bound to an underlying frame source and sink.
1.3.111.2.802.1.1.24.1.3.1.1.3InterfaceIndexOrZeroread-onlycurrent
ieee8021BridgeEvbUAPSchCdcpAdminEnable
OBJECT-TYPE
Administrative status of CDCP.
1.3.111.2.802.1.1.24.1.3.1.1.4INTEGER {enable(1), disable(2)}read-createcurrent
ieee8021BridgeEvbUAPSchAdminCDCPRole
OBJECT-TYPE
The administratively configured value for the local port's role parameter. The value of AdminRole is not reflected in the S-channel TLV. The AdminRole may take the value S or B. S indicates the sender is unwilling to accept S-channels configuration (mode, # channels supported, channel index) from its neighbor and that the sender is willing to accept SVID assignments from the neighbor. Stations usually take the S role. B indicates the sender is willing to accept S-channels configuration (mode, # channels supported, channel index) from its neighbor and that the sender is willing do the best it can to fill the SVID assignments from the neighbor. Bridges usually take the B role.
1.3.111.2.802.1.1.24.1.3.1.1.5INTEGER {cdcpRoleB(1), cdcpRoleS(2)}read-createcurrent
ieee8021BridgeEvbUAPSchAdminCDCPChanCap
OBJECT-TYPE
The administratively configured value for the Number of Channels supported parameter. This value is included as the ChanCap parameter in the S-channel TLV.
1.3.111.2.802.1.1.24.1.3.1.1.6Integer32 (1..167)read-createcurrent
ieee8021BridgeEvbUAPSchOperCDCPChanCap
OBJECT-TYPE
The operational value for the Number of Channels supported parameter. This value is included as the ChnCap parameter in the S-channel TLV.
1.3.111.2.802.1.1.24.1.3.1.1.7Integer32 (1..167)read-onlycurrent
ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolLow
OBJECT-TYPE
Determines the lowest S-VIDs available for assignment by CDCP.
1.3.111.2.802.1.1.24.1.3.1.1.8VlanIndexread-createcurrent
ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolHigh
OBJECT-TYPE
Determines the highest S-VIDs available for assignment by CDCP.
1.3.111.2.802.1.1.24.1.3.1.1.9VlanIndexread-createcurrent
ieee8021BridgeEvbUAPSchOperState
OBJECT-TYPE
The current running state of CDCP.
1.3.111.2.802.1.1.24.1.3.1.1.10INTEGER {running(1), notRunning(2)}read-onlycurrent
ieee8021BridgeEvbSchCdcpRemoteEnabled
OBJECT-TYPE
CDCP state for the remote S-channel.
1.3.111.2.802.1.1.24.1.3.1.1.11INTEGER {enable(1), disable(2)}read-onlycurrent
ieee8021BridgeEvbSchCdcpRemoteRole
OBJECT-TYPE
The value for the remote port's role parameter.
1.3.111.2.802.1.1.24.1.3.1.1.12INTEGER {cdcpRoleB(1), cdcpRoleS(2)}read-onlycurrent
ieee8021BridgeEvbUAPConfigStorageType
OBJECT-TYPE
The storage type for this row. Rows in this table that were created through an external process may have a storage type of readOnly or permanent. For a storage type of permanent, none of the columns have to be writable.
1.3.111.2.802.1.1.24.1.3.1.1.13StorageTyperead-createcurrent
ieee8021BridgeEvbUAPConfigRowStatus
OBJECT-TYPE
RowStatus for creating a UAP table entry.
1.3.111.2.802.1.1.24.1.3.1.1.14RowStatusread-createcurrent
ieee8021BridgeEvbCAPConfigTable
OBJECT-TYPE
A table that contains configuration information for the S-Channel Access Ports (CAP).
1.3.111.2.802.1.1.24.1.3.2not-accessiblecurrent
ieee8021BridgeEvbCAPConfigEntry
OBJECT-TYPE
A list of objects containing information for the S-Channel Access Ports (CAP)
1.3.111.2.802.1.1.24.1.3.2.1not-accessiblecurrent
ieee8021BridgeEvbSchID
OBJECT-TYPE
This object represents the SVID for a ieee8021BridgeEvbSysType of evbBridge and a SCID(S-Channel ID) for a ieee8021BridgeEvbSysType of evbStation.
1.3.111.2.802.1.1.24.1.3.2.1.1Unsigned32 (1..4094)not-accessiblecurrent
ieee8021BridgeEvbCAPComponentId
OBJECT-TYPE
Component ID for S-channel Access Port.
1.3.111.2.802.1.1.24.1.3.2.1.2IEEE8021PbbComponentIdentifierread-onlycurrent
ieee8021BridgeEvbCapConfigIfIndex
OBJECT-TYPE
The value of the instance of the IfIndex object, defined in the IF-MIB, for the interface corresponding to this port, or the value 0 if the port has not been bound to an underlying frame source and sink. The underlying IfEntry indexed by this column MUST be persistent across reinitializations of the management system.
1.3.111.2.802.1.1.24.1.3.2.1.3InterfaceIndexOrZeroread-onlycurrent
ieee8021BridgeEvbCAPPort
OBJECT-TYPE
Port number for the S-Channel Access Port.
1.3.111.2.802.1.1.24.1.3.2.1.4IEEE8021BridgePortNumberread-onlycurrent
ieee8021BridgeEvbCAPSChannelID
OBJECT-TYPE
S-Channel ID (SCID) for this CAP.
1.3.111.2.802.1.1.24.1.3.2.1.5Unsigned32read-onlycurrent
ieee8021BridgeEvbCAPAssociateSBPOrURPCompID
OBJECT-TYPE
Component ID of the Server Edge Port to be associated with the CAP.
1.3.111.2.802.1.1.24.1.3.2.1.6IEEE8021PbbComponentIdentifierread-writecurrent
ieee8021BridgeEvbCAPAssociateSBPOrURPPort
OBJECT-TYPE
Port number of the Server Edge Port to be associated with the CAP.
1.3.111.2.802.1.1.24.1.3.2.1.7IEEE8021BridgePortNumberread-writecurrent
ieee8021BridgeEvbCAPRowStatus
OBJECT-TYPE
RowStatus to create/destroy this table.
1.3.111.2.802.1.1.24.1.3.2.1.8RowStatusread-createcurrent
ieee8021BridgeEvbURPTable
OBJECT-TYPE
A table that contains configuration information for the Uplink Relay Ports(URP).
1.3.111.2.802.1.1.24.1.3.3not-accessiblecurrent
ieee8021BridgeEvbURPEntry
OBJECT-TYPE
A list of objects containing information for the Uplink Relay Ports(URP).
1.3.111.2.802.1.1.24.1.3.3.1not-accessiblecurrent
ieee8021BridgeEvbURPComponentId
OBJECT-TYPE
Component ID that the URP belongs to.
1.3.111.2.802.1.1.24.1.3.3.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021BridgeEvbURPPort
OBJECT-TYPE
port number of the urp.
1.3.111.2.802.1.1.24.1.3.3.1.2IEEE8021BridgePortNumbernot-accessiblecurrent
ieee8021BridgeEvbURPIfIndex
OBJECT-TYPE
The value of the instance of the IfIndex object, defined in the IF-MIB, for the interface corresponding to this port, or the value 0 if the port has not been bound to an underlying frame source and sink. It is an implementation specific decision as to whether this object may be modified if it has been created or if 0 is a legal value. The underlying IfEntry indexed by this column MUST be persistent across reinitializations of the management system.
1.3.111.2.802.1.1.24.1.3.3.1.3InterfaceIndexOrZeroread-writecurrent
ieee8021BridgeEvbURPBindToISSPort
OBJECT-TYPE
The evbURPBindToISSPort is the ISS Port Number where the URP is attached. This binding is optional and only required in some systems.
1.3.111.2.802.1.1.24.1.3.3.1.4IEEE8021BridgePortNumberread-writecurrent
ieee8021BridgeEvbURPLldpManual
OBJECT-TYPE
The evbUrpLldpManual parameter control how the EVB TLV determines the operating values for parameters. When set TRUE only the local EVB TLV will be used to determine the parameters.
1.3.111.2.802.1.1.24.1.3.3.1.6TruthValueread-writecurrent
ieee8021BridgeEvbURPVdpOperRsrcWaitDelay
OBJECT-TYPE
The parameter evbURPVdpOperRsrcWaitDelay is the exponent of 2 used to set the VDP resourceWaitDelay timer at the EVB Bridge.
1.3.111.2.802.1.1.24.1.3.3.1.9Unsigned32read-onlydeprecated
ieee8021BridgeEvbURPVdpOperRespWaitDelay
OBJECT-TYPE
The evbUrpVdpOperRespWaitDelay is how long a EVb station VDP will wait for a response from the EVB Bridge VDP.
1.3.111.2.802.1.1.24.1.3.3.1.10Unsigned32read-writecurrent
ieee8021BridgeEvbURPVdpOperReinitKeepAlive
OBJECT-TYPE
The evbURPVdpOperReinitKeepAlive is the exponent of 2 used to determine the time interval of Keep Alives transmitted by the EVB station.
1.3.111.2.802.1.1.24.1.3.3.1.11Unsigned32read-writedeprecated
ieee8021BridgeEvbURPVdpOperRsrcWaitDelayExp
OBJECT-TYPE
The parameter evbURPVdpOperRsrcWaitDelay is the exponent of 2 used to set the VDP resourceWaitDelay timer at the EVB Bridge.
1.3.111.2.802.1.1.24.1.3.3.1.12Unsigned32 (0..31)read-onlycurrent
ieee8021BridgeEvbURPVdpOperReinitKeepAliveExp
OBJECT-TYPE
The evbURPVdpOperReinitKeepAlive is the exponent of 2 used to determine the time interval of Keep Alives transmitted by the EVB station.
1.3.111.2.802.1.1.24.1.3.3.1.13Unsigned32 (0..31)read-writecurrent
ieee8021BridgeEvbEcpTable
OBJECT-TYPE
A table that contains configuration information for the Edge Control Protocol (ECP).
1.3.111.2.802.1.1.24.1.3.4not-accessiblecurrent
ieee8021BridgeEvbEcpEntry
OBJECT-TYPE
A list of objects containing information for theEdge Control Protocol (ECP).
1.3.111.2.802.1.1.24.1.3.4.1not-accessiblecurrent
ieee8021BridgeEvbEcpComponentId
OBJECT-TYPE
Component ID .
1.3.111.2.802.1.1.24.1.3.4.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021BridgeEvbEcpPort
OBJECT-TYPE
Port number.
1.3.111.2.802.1.1.24.1.3.4.1.2IEEE8021BridgePortNumbernot-accessiblecurrent
ieee8021BridgeEvbEcpOperAckTimerInit
OBJECT-TYPE
The initial value used to initialize ackTimer (43.3.6.1).
1.3.111.2.802.1.1.24.1.3.4.1.3Unsigned32read-onlydeprecated
ieee8021BridgeEvbEcpOperMaxRetries
OBJECT-TYPE
This integer variable defines the maximum number of times that the ECP transmit state machine will retry a transmission if no ACK is received.
1.3.111.2.802.1.1.24.1.3.4.1.4Unsigned32read-onlycurrent
ieee8021BridgeEvbEcpTxFrameCount
OBJECT-TYPE
The evbECPTxFrameCount is the number of ECP frame transmitted since ECP was instanciated.
1.3.111.2.802.1.1.24.1.3.4.1.5Counter32read-onlycurrent
ieee8021BridgeEvbEcpTxRetryCount
OBJECT-TYPE
The evbECPTxRetryCount is the number of times ECP re-tried transmission since ECP was instanciated.
1.3.111.2.802.1.1.24.1.3.4.1.6Counter32read-onlycurrent
ieee8021BridgeEvbEcpTxFailures
OBJECT-TYPE
The evbECPTxFailures is the number of times ECP failed to successfully deliver a frame since ECP was instanciated.
1.3.111.2.802.1.1.24.1.3.4.1.7Counter32read-onlycurrent
ieee8021BridgeEvbEcpRxFrameCount
OBJECT-TYPE
The evbECPRxFrameCount is the number of frames received since ECP was instanciated.
1.3.111.2.802.1.1.24.1.3.4.1.8Counter32read-onlycurrent
ieee8021BridgeEvbEcpOperAckTimerInitExp
OBJECT-TYPE
The initial value used to initialize ackTimer. Expressed as exp where 10*2exp microseconds is the duration of the ack timer(43.3.6.1).
1.3.111.2.802.1.1.24.1.3.4.1.9Unsigned32 (0..31)read-onlycurrent
ieee8021BridgeEvbConformance
OBJECT-IDENTITY
1.3.111.2.802.1.1.24.2
ieee8021BridgeEvbGroups
OBJECT-IDENTITY
1.3.111.2.802.1.1.24.2.1
ieee8021BridgeEvbCompliances
OBJECT-IDENTITY
1.3.111.2.802.1.1.24.2.2

Conformance

NameOIDStatus
ieee8021BridgeEvbSysGroup
OBJECT-GROUP
The collection of objects used to represent a EVB management objects.
1.3.111.2.802.1.1.24.2.1.1deprecated
ieee8021BridgeEvbSbpGroup
OBJECT-GROUP
The collection of objects used to represent a SBP management objects.
1.3.111.2.802.1.1.24.2.1.3deprecated
ieee8021BridgeEvbVSIDBGroup
OBJECT-GROUP
The collection of objects used to represent a EVB VSI DB table.
1.3.111.2.802.1.1.24.2.1.4deprecated
ieee8021BridgeEvbUAPGroup
OBJECT-GROUP
The collection of objects used to represent a EVB UAP table.
1.3.111.2.802.1.1.24.2.1.5current
ieee8021BridgeEvbCAPConfigGroup
OBJECT-GROUP
The collection of objects used to represent a EVB CAP management objects.
1.3.111.2.802.1.1.24.2.1.6current
ieee8021BridgeEvbsURPGroup
OBJECT-GROUP
The collection of objects used to represent a EVBS URP management objects.
1.3.111.2.802.1.1.24.2.1.7deprecated
ieee8021BridgeEvbEcpGroup
OBJECT-GROUP
The collection of objects used to represent a EVB CAP management objects.
1.3.111.2.802.1.1.24.2.1.8deprecated
ieee8021BridgeEvbSysV2Group
OBJECT-GROUP
The collection of objects used to represent a EVB management objects.
1.3.111.2.802.1.1.24.2.1.9current
ieee8021BridgeEvbSbpV2Group
OBJECT-GROUP
The collection of objects used to represent a SBP management objects.
1.3.111.2.802.1.1.24.2.1.10current
ieee8021BridgeEvbVSIDBV2Group
OBJECT-GROUP
The collection of objects used to represent a EVB VSI DB table.
1.3.111.2.802.1.1.24.2.1.11current
ieee8021BridgeEvbsURPV2Group
OBJECT-GROUP
The collection of objects used to represent a EVBS URP management objects.
1.3.111.2.802.1.1.24.2.1.12current
ieee8021BridgeEvbEcpV2Group
OBJECT-GROUP
The collection of objects used to represent a EVB CAP management objects.
1.3.111.2.802.1.1.24.2.1.13current
ieee8021BridgeEvbbCompliance
MODULE-COMPLIANCE
The compliance statement for devices supporting EVB as defined in IEEE 802.1Q.
1.3.111.2.802.1.1.24.2.2.1deprecated
ieee8021BridgeEvbsCompliance
MODULE-COMPLIANCE
The compliance statement for devices supporting EVBS as defined in IEEE 802.1Q.
1.3.111.2.802.1.1.24.2.2.2deprecated
ieee8021BridgeEvbbComplianceV2
MODULE-COMPLIANCE
The compliance statement for devices supporting EVB as defined in IEEE 802.1Q.
1.3.111.2.802.1.1.24.2.2.3current
ieee8021BridgeEvbsComplianceV2
MODULE-COMPLIANCE
The compliance statement for devices supporting EVBS as defined in IEEE 802.1Q.
1.3.111.2.802.1.1.24.2.2.4current