IEC-62439-3-MIB
- Registered at
- 1.0.62439
- Last updated
- 2014-05-22 00:00
- Organization
- IEC/SC 65C
- Revisions
- 2014-05-22 00:00, 2012-02-17 00:00, 2011-08-26 00:00, 2008-11-10 00:00, 2006-12-16 00:00
- Namespace
- standard
- Source file
IEC-62439-3-MIB- Digest
sha256:c5771790d4717c803ba3fab279a08b986f3c7c1102a18c4f3987609749c1da2d
Description
This MIB module defines the Network Management interfaces for the redundancy protocols defined by the IEC 62439 suite. This MIB exposes the IEC62439-3 objects (PRP + HSR)
Contact
International Electrotechnical Commission IEC Central Office 3, rue de Varembe P.O. Box 131 1211 GENEVA 20 Switzerland Phone: +41 22 919 02 11 Fax: +41 22 919 03 00 email: info@iec.ch
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IEC-62439-3-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| SecondFraction TEXTUAL-CONVENTION time interval expressed in multiple of 2**-16 = 15,7 microseconds this corresponds to the fraction of seconds in the NTP time representation the minimum time is 0 microseconds, the maximum 18 hours | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mrp OBJECT-IDENTITY | 1.0.62439.1 | |||
| prp OBJECT-IDENTITY | 1.0.62439.2 | |||
| linkRedundancyEntityNotifications OBJECT-IDENTITY | 1.0.62439.2.20 | |||
| linkRedundancyEntityObjects OBJECT-IDENTITY | 1.0.62439.2.21 | |||
| lreConfiguration OBJECT-IDENTITY | 1.0.62439.2.21.0 | |||
| lreConfigurationGeneralGroup OBJECT-IDENTITY | 1.0.62439.2.21.0.0 | |||
| lreManufacturerName OBJECT-TYPE specifies the name of the LRE device manufacturer | 1.0.62439.2.21.0.0.1 | DisplayString | read-only | current |
| lreInterfaceCount OBJECT-TYPE total number of LREs present in this system. | 1.0.62439.2.21.0.0.2 | Integer32 | read-only | current |
| lreConfigurationInterfaceGroup OBJECT-IDENTITY | 1.0.62439.2.21.0.1 | |||
| lreConfigurationInterfaces OBJECT-IDENTITY | 1.0.62439.2.21.0.1.0 | |||
| lreInterfaceConfigTable OBJECT-TYPE list of PRP/HSR LREs. Each entry corresponds to one PRP/HSR Link Redundancy Entity (LRE), each representing a pair of LAN ports A and B. Basic devices supporting PRP/HSR may have only one LRE and thus one entry in the table, while more complex devices may have several entries for multiple LREs. | 1.0.62439.2.21.0.1.0.1 | not-accessible | current | |
| lreInterfaceConfigEntry OBJECT-TYPE each entry contains management information applicable to a particular LRE. | 1.0.62439.2.21.0.1.0.1.1 | not-accessible | current | |
| lreInterfaceConfigIndex OBJECT-TYPE A unique value for each LRE. | 1.0.62439.2.21.0.1.0.1.1.1 | Unsigned32 | not-accessible | current |
| lreRowStatus OBJECT-TYPE indicates the status of the LRE table entry | 1.0.62439.2.21.0.1.0.1.1.2 | RowStatus | read-create | current |
| lreNodeType OBJECT-TYPE specifies the operation mode of the LRE:PRP mode 1(1), HSR mode(2) Note: PRP mode 0 is considered deprecated and is not supported by this revision of the MIB | 1.0.62439.2.21.0.1.0.1.1.3 | INTEGER {prpmode1(1), hsr(2)} | read-write | current |
| lreNodeName OBJECT-TYPE specifies this LRE's node name | 1.0.62439.2.21.0.1.0.1.1.4 | DisplayString | read-write | current |
| lreVersionName OBJECT-TYPE specifies the version of this LRE's software | 1.0.62439.2.21.0.1.0.1.1.5 | OCTET STRING (SIZE(1..32)) | read-only | current |
| lreMacAddress OBJECT-TYPE Specified the MAC address to be used by this LRE, MAC addresses are identical for all ports of a single LRE | 1.0.62439.2.21.0.1.0.1.1.6 | MacAddress | read-write | current |
| lrePortAdminStateA OBJECT-TYPE Specifies whether the port A shall be active or not Active through administrative action (Default: active). | 1.0.62439.2.21.0.1.0.1.1.7 | INTEGER {notActive(1), active(2)} | read-write | current |
| lrePortAdminStateB OBJECT-TYPE Specifies whether the port B shall be active or not Active through administrative action (Default: active). | 1.0.62439.2.21.0.1.0.1.1.8 | INTEGER {notActive(1), active(2)} | read-write | current |
| lreLinkStatusA OBJECT-TYPE shows the actual link status of the LRE's port A | 1.0.62439.2.21.0.1.0.1.1.9 | INTEGER {up(1), down(2)} | read-only | current |
| lreLinkStatusB OBJECT-TYPE shows the actual link status of the LRE's port B | 1.0.62439.2.21.0.1.0.1.1.10 | INTEGER {up(1), down(2)} | read-only | current |
| lreDuplicateDiscard OBJECT-TYPE specifies whether a duplicate discard algorithm is used at reception (Default: discard). | 1.0.62439.2.21.0.1.0.1.1.11 | INTEGER {doNotDiscard(1), discard(2)} | read-write | current |
| lreTransparentReception OBJECT-TYPE if removeRCT is configured, the RCT is removed when forwarding to the upper layers, only applicable for PRP LRE (Default: removeRCT). | 1.0.62439.2.21.0.1.0.1.1.12 | INTEGER {removeRCT(1), passRCT(2)} | read-write | current |
| lreHsrLREMode OBJECT-TYPE This enumeration is only applicable if the LRE is an HSR bridging node or RedBox. It shows the mode of the HSR LRE: (1) Default mode: The HSR LRE is in mode h and bridges tagged HSR traffic (2) Optional mode: The HSR LRE is in mode n and bridging between its HSR ports Is disabled. Traffic is HSR tagged. (3) Optional mode: The HSR LRE is in mode t and bridges non-tagged HSR traffic between its HSR ports (4) Optional mode: The HSR LRE is in mode u and behaves like in mode h, except it does not remove unicast messages (5) Optional mode: The HSR LRE is configured in mixed mode. HSR frames are handled according to mode h. Non-HSR frames are handled according to 802.1D bridging rules. | 1.0.62439.2.21.0.1.0.1.1.13 | INTEGER {modeh(1), moden(2), modet(3), modeu(4), modem(5)} | read-write | current |
| lreSwitchingEndNode OBJECT-TYPE This enumeration shows which feature is enabled in this particular LRE: (1): an unspecified non-bridging node, e.g. SRP. (2): an unspecified bridging node, e.g. RSTP. (3): a PRP node/RedBox. (4): an HSR RedBox with regular Ethernet traffic on its interlink. (5): an HSR switching node. (6): an HSR RedBox with HSR tagged traffic on its interlink. (7): an HSR RedBox with PRP traffic for LAN A on its interlink. (8): an HSR RedBox with PRP traffic for LAN B on its interlink. | 1.0.62439.2.21.0.1.0.1.1.14 | INTEGER {nonbridgingnode(1), bridgingunspecified(2), prpnode(3), hsrredboxsan(4), hsrnode(5), hsrredboxhsr(6), hsrredboxprpa(7), hsrredboxprpb(8)} | read-write | current |
| lreRedBoxIdentity OBJECT-TYPE Applicable to RedBox HSR-PRP A and RedBox HSR-PRP B. One ID is used by one pair of RedBoxes (one configured to A and one configured to B) coupling an HSR ring to a PRP network. The integer value states the value of the path field a RedBox inserts into each frame it receives from its interlink and injects into the HSR ring. When interpreted as binary values, the LSB denotes the configuration of the RedBox (A or B), and the following 3 bits denote the identifier of a RedBox pair. | 1.0.62439.2.21.0.1.0.1.1.15 | INTEGER {id1a(2), id1b(3), id2a(4), id2b(5), id3a(6), id3b(7), id4a(8), id4b(9), id5a(10), id5b(11), id6a(12), id6b(13), id7a(14), id7b(15)} | read-write | current |
| lreEvaluateSupervision OBJECT-TYPE True if the LRE evaluates received supervision frames. False if it drops the supervision frames without evaluating. Note: LREs are required to send supervision frames, but reception is optional. Default value is dependent on implementation. | 1.0.62439.2.21.0.1.0.1.1.16 | TruthValue | read-write | current |
| lreNodesTableClear OBJECT-TYPE specifies that the Node Table is to be cleared | 1.0.62439.2.21.0.1.0.1.1.17 | INTEGER {noOp(0), clearNodeTable(1)} | read-write | current |
| lreProxyNodeTableClear OBJECT-TYPE specifies that the Proxy Node Table is to be cleared | 1.0.62439.2.21.0.1.0.1.1.18 | INTEGER {noOp(0), clearProxyNodeTable(1)} | read-write | current |
| lreDupListResideMaxTime OBJECT-TYPE the longest time an entry may reside in the duplicates list, expressed as the number of seconds multiplied by 65536; the default value is 26214 x 15 us, or 400 ms; too low a value can cause broadcast storms | 1.0.62439.2.21.0.1.0.1.1.19 | SecondFraction | read-write | current |
| lreStatistics OBJECT-IDENTITY | 1.0.62439.2.21.1 | |||
| lreStatisticsInterfaceGroup OBJECT-IDENTITY | 1.0.62439.2.21.1.1 | |||
| lreStatisticsInterfaces OBJECT-IDENTITY | 1.0.62439.2.21.1.1.0 | |||
| lreInterfaceStatsTable OBJECT-TYPE list of PRP/HSR LREs. Each entry corresponds to one PRP/HSR Link Redundancy Entity (LRE), each representing a pair of LAN ports A and B and a port C towards the application/interlink. Basic devices supporting PRP/HSR may have only one LRE and thus one entry in the table, while more complex devices may have several entries for multiple LREs. | 1.0.62439.2.21.1.1.0.1 | not-accessible | current | |
| lreInterfaceStatsEntry OBJECT-TYPE An entry containing management information applicable to a particular LRE. | 1.0.62439.2.21.1.1.0.1.1 | not-accessible | current | |
| lreInterfaceStatsIndex OBJECT-TYPE A unique value for each LRE. | 1.0.62439.2.21.1.1.0.1.1.1 | Unsigned32 | not-accessible | current |
| lreCntTxA OBJECT-TYPE number of frames sent over port A that are HSR tagged or fitted with a PRP Redundancy Control Trailer. Only frames that are HSR tagged or do have a PRP RCT are counted. A frame aborted during the transmission is not counted. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.2 | Counter32 | read-only | current |
| lreCntTxB OBJECT-TYPE number of frames sent over port B that are HSR tagged or fitted with a PRP Redundancy Control Trailer. Only frames that are HSR tagged or do have a PRP RCT are counted. A frame aborted during the transmission is not counted. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.3 | Counter32 | read-only | current |
| lreCntTxC OBJECT-TYPE number of frames sent towards the application interface of the DANP or DANH or over the interlink of the RedBox. Frames with and without PRP RCT or HSR tag are counted, but not link-local frames. A frame aborted during the transmission is not counted. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.4 | Counter32 | read-only | current |
| lreCntErrWrongLanA OBJECT-TYPE number of frames with the wrong LAN identifier received on LRE port A. Initial value = 0. Only applicable to PRP ports. | 1.0.62439.2.21.1.1.0.1.1.5 | Counter32 | read-only | current |
| lreCntErrWrongLanB OBJECT-TYPE number of frames with the wrong LAN identifier received on LRE port B. Initial value = 0. Only applicable to PRP ports. | 1.0.62439.2.21.1.1.0.1.1.6 | Counter32 | read-only | current |
| lreCntErrWrongLanC OBJECT-TYPE number of frames with the wrong LAN identifier received on the interlink of a RedBox. Only applicable to HSR RedBoxes in HSR-PRP configuration (hsrredboxprpa and hsrredboxprpb). | 1.0.62439.2.21.1.1.0.1.1.7 | Counter32 | read-only | current |
| lreCntRxA OBJECT-TYPE number of frames received on a LRE port A. Only frames that are HSR tagged or fitted with a PRP Redundancy Control Trailer are counted. Frames that are not forwarded anywhere (e.g. because the sender of the frame is in the proxy node table) are counted, too. Only frames received completely and without error are counted. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.8 | Counter32 | read-only | current |
| lreCntRxB OBJECT-TYPE number of frames received on a LRE port B. Only frames that are HSR tagged or fitted with a PRP Redundancy Control Trailer are counted. Frames that are not forwarded anywhere (e.g. because the sender of the frame is in the proxy node table) are counted, too. Only frames received completely and without error are counted. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.9 | Counter32 | read-only | current |
| lreCntRxC OBJECT-TYPE number of frames received from the application interface of a DANP or DANH or the number of number of frames received on the interlink of a RedBox. Frames with and without PRP RCT or HSR tag are counted, but not link-local frames. Only frames received completely and without error are counted. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.10 | Counter32 | read-only | current |
| lreCntErrorsA OBJECT-TYPE number of frames with errors received on this LRE port A. Initial value 0. | 1.0.62439.2.21.1.1.0.1.1.11 | Counter32 | read-only | current |
| lreCntErrorsB OBJECT-TYPE number of frames with errors received on this LRE port B. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.12 | Counter32 | read-only | current |
| lreCntErrorsC OBJECT-TYPE number of frames with errors received on the application interface of a DANP or DANH or on the interlink of a RedBox. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.13 | Counter32 | read-only | current |
| lreCntNodes OBJECT-TYPE number of nodes in the Nodes Table. | 1.0.62439.2.21.1.1.0.1.1.14 | Integer32 | read-only | current |
| lreCntProxyNodes OBJECT-TYPE number of nodes in the Proxy Node Table. Only applicable to RedBox. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.15 | Integer32 | read-only | current |
| lreCntUniqueA OBJECT-TYPE number of entries in the duplicate detection mechanism on port A for which no duplicate was received. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.16 | Counter32 | read-only | current |
| lreCntUniqueB OBJECT-TYPE number of entries in the duplicate detection mechanism on port B for which no duplicate was received. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.17 | Counter32 | read-only | current |
| lreCntUniqueC OBJECT-TYPE number of entries in the duplicate detection mechanism on the application interface of the DAN or the interlink of the RedBox for which no duplicate was received. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.18 | Counter32 | read-only | current |
| lreCntDuplicateA OBJECT-TYPE number of entries in the duplicate detection mechanism on port A for which one single duplicate was received. Initial value 0. | 1.0.62439.2.21.1.1.0.1.1.19 | Counter32 | read-only | current |
| lreCntDuplicateB OBJECT-TYPE number of entries in the duplicate detection mechanism on port B for which one single duplicate was received. Initial value 0. | 1.0.62439.2.21.1.1.0.1.1.20 | Counter32 | read-only | current |
| lreCntDuplicateC OBJECT-TYPE number of entries in the duplicate detection mechanism on the application interface of the DAN or the interlink of the RedBox for which one single duplicate was received. Initial value 0. | 1.0.62439.2.21.1.1.0.1.1.21 | Counter32 | read-only | current |
| lreCntMultiA OBJECT-TYPE number of entries in the duplicate detection mechanism on port A for which more than one duplicate was received. Initial value 0. | 1.0.62439.2.21.1.1.0.1.1.22 | Counter32 | read-only | current |
| lreCntMultiB OBJECT-TYPE number of entries in the duplicate detection mechanism on port B for which more than one duplicate was received. Initial value 0. | 1.0.62439.2.21.1.1.0.1.1.23 | Counter32 | read-only | current |
| lreCntMultiC OBJECT-TYPE number of entries in the duplicate detection mechanism on the application interface of the DAN or the interlink of the RedBox for which more than one duplicate was received. Initial value = 0. | 1.0.62439.2.21.1.1.0.1.1.24 | Counter32 | read-only | current |
| lreCntOwnRxA OBJECT-TYPE number of HSR tagged frames received on Port A that originated from this device. Frames originate from this device if the source MAC matches the MAC of the LRE, or if the source MAC appears in the proxy node table (if implemented). Applicable only to HSR. Initial value 0. | 1.0.62439.2.21.1.1.0.1.1.25 | Counter32 | read-only | current |
| lreCntOwnRxB OBJECT-TYPE number of HSR tagged frames received on Port B that originated from this device. Frames originate from this device if the source MAC matches the MAC of the LRE, or if the source MAC appears in the proxy node table (if implemented). Applicable only to HSR. Initial value 0. | 1.0.62439.2.21.1.1.0.1.1.26 | Counter32 | read-only | current |
| lreNodesTable OBJECT-TYPE The node table (if it exists on that node) contains information about all remote LRE, which advertised themselves through supervision frames | 1.0.62439.2.21.1.1.0.2 | not-accessible | current | |
| lreNodesEntry OBJECT-TYPE Each entry in the node table (if it exists) contains information about a particular remote LRE registered in the node table, which advertised itself through supervision frames. | 1.0.62439.2.21.1.1.0.2.1 | not-accessible | current | |
| lreNodesIndex OBJECT-TYPE Unique value for each node in the LRE node table. | 1.0.62439.2.21.1.1.0.2.1.1 | Unsigned32 | not-accessible | current |
| lreNodesMacAddress OBJECT-TYPE Each MAC address corresponds to a single Doubly Attached Node | 1.0.62439.2.21.1.1.0.2.1.2 | MacAddress | read-only | current |
| lreTimeLastSeenA OBJECT-TYPE Time in TimeTicks (1/100s) since the last frame from this remote LRE was received over LAN A. Initialized with a value of 0 upon node registration in the node table. | 1.0.62439.2.21.1.1.0.2.1.3 | TimeTicks | read-only | current |
| lreTimeLastSeenB OBJECT-TYPE Time in TimeTicks (1/100s) since the last frame from this remote LRE was received over LAN B. Initialized with a value of 0 upon node registration in the node table. | 1.0.62439.2.21.1.1.0.2.1.4 | TimeTicks | read-only | current |
| lreRemNodeType OBJECT-TYPE DAN type, as indicated in the received supervision frame. | 1.0.62439.2.21.1.1.0.2.1.5 | INTEGER {danp(0), redboxp(1), vdanp(2), danh(3), redboxh(4), vdanh(5)} | read-only | current |
| lreProxyNodeTable OBJECT-TYPE The proxy node table (if implemented) contains information about all nodes, for which the LRE acts as a connection to the HSR/PRP network. | 1.0.62439.2.21.1.1.0.3 | not-accessible | current | |
| lreProxyNodeEntry OBJECT-TYPE Each entry in the proxy node table contains information about a particular node for which the LRE acts as a connection to the HSR or PRP network. | 1.0.62439.2.21.1.1.0.3.1 | not-accessible | current | |
| lreProxyNodeIndex OBJECT-TYPE A unique value for each node in the LRE proxy node table. | 1.0.62439.2.21.1.1.0.3.1.1 | Unsigned32 | not-accessible | current |
| lreProxyNodeMacAddress OBJECT-TYPE Each entry contains information about a particular node for which the LRE acts as a proxy for the HSR PRP network. | 1.0.62439.2.21.1.1.0.3.1.2 | MacAddress | read-only | current |
| linkRedundancyEntityConformance OBJECT-IDENTITY | 1.0.62439.2.22 | |||
| linkRedundancyConformance OBJECT-IDENTITY | 1.0.62439.2.22.1 | |||
| lreGroups OBJECT-IDENTITY | 1.0.62439.2.22.1.1 | |||
| linkRedundancyCompliances OBJECT-IDENTITY | 1.0.62439.2.22.2 | |||
| crp OBJECT-IDENTITY | 1.0.62439.3 | |||
| brp OBJECT-IDENTITY | 1.0.62439.4 | |||
| drp OBJECT-IDENTITY | 1.0.62439.5 | |||
| rrp OBJECT-IDENTITY | 1.0.62439.6 | |||
| ptp OBJECT-IDENTITY | 1.0.62439.7 |
Conformance
| Name | OID | Status |
|---|---|---|
| lreDefaultGrp OBJECT-GROUP Objects in the default group | 1.0.62439.2.22.1.1.1 | current |
| linkRedundancyCompliance MODULE-COMPLIANCE Compliance for support by IEC 62439-3 module | 1.0.62439.2.22.2.1 | current |