IBMNETU-MIB
- Registered at
- 1.3.6.1.4.1.2.6.150
- Namespace
- ibm
- Source file
IBMNETU-MIB- Digest
sha256:a0322464dca6c29fcad1cf3de7db3bd0186dac47507cf202a6a055bd39337455
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IBMNETU-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ibm OBJECT-IDENTITY | 1.3.6.1.4.1.2 | |||
| ibmProd OBJECT-IDENTITY | 1.3.6.1.4.1.2.6 | |||
| ibmnetu OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150 | |||
| ibmnetuadmin OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.1 | |||
| ibmnetuadminproducts OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.1.1 | |||
| ibmnetumod400 OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.1.1.1 | |||
| ibmnetuadminOID OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.1.2 | |||
| ibmnetuEnetChipSet OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.1.2.1 | |||
| enetChipSetToshiba OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.1.2.1.1 | |||
| enetChipSetAMD OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.1.2.1.2 | |||
| ibmnetuadminDebug OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.1.3 | |||
| ibmnetusystem OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.2 | |||
| ibmnetusystemInfo OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.2.1 | |||
| ibmnetucfgInfo OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.2.2 | |||
| ibmnetuhardware OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.3 | |||
| ibmnetuhardwareGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.3.1 | |||
| ibmnetuPCIAdapTable OBJECT-TYPE A table of information about PCI adapters in this box. | 1.3.6.1.4.1.2.6.150.3.1.1 | not-accessible | mandatory | |
| ibmnetuPCIAdapEntry OBJECT-TYPE An entry containing objects to describe the adapter in a given slot. | 1.3.6.1.4.1.2.6.150.3.1.1.1 | not-accessible | mandatory | |
| ibmnetuPCIAdapSlotNum OBJECT-TYPE The number identifying a slot location where an adapter can be inserted. | 1.3.6.1.4.1.2.6.150.3.1.1.1.1 | INTEGER (1..65535) | read-only | mandatory |
| ibmnetuPCIAdapType OBJECT-TYPE The type of adapter that is inserted into this slot. If no adapter is present, the variable will take the value not-present(2). The enumerations marked reserved# are saved for future enhancements. | 1.3.6.1.4.1.2.6.150.3.1.1.1.2 | INTEGER {unknown(1), not-present(2), atm-mmf-lic294(3), reserved1(4), atm-smf-lic295(5), reserved2(6), token-ring-lic280(7), escon-lic287(8), reserved3(9), reserved4(10), serial-rs232-lic282(11), serial-v35-lic290(12), serial-x21-lic291(13), ethernet-lic281(14), ethernet-fast-lic288(15), serial-hssi-lic289(16), fddi-lic286(17), reserved5(18), reserved6(19), parallel-channel-lic299(20)} | read-only | mandatory |
| ibmnetuPCIAdapOperStatus OBJECT-TYPE The operational status of this PCI adapter. unknown (1) : If there was problem determining the operational status of the adapter. not-configured (2) : If the adapter inserted in the slot is recognized but no router configuration exists. not-present (3) : If no adapter is currently inserted. does-not-apply (4) : If this adapter does not contain an operational state. enable-pending (5) : If commands have been issued to enable the adapter but have not been completed. enabled (6) : If commands have been successfully issued to enable the adapter. disable-pending (7) : If commands have been issued to disable the adapter but have not been completed. disabled (8) : If commands have been successfully issued to disable the adapter. not-initialized (9) : If the adapter has not completed its initialization. unknown-device (10) : If the adapter inserted in the slot can not be recognized. hardware-error (11) : If the adapter can not be used nor made ready to be used. not-powered (12) : If the adapter has had a problem obtaining power from its slot. diagnostics (13) : If the adapter is currently undergoing diagnostics. wrs-available (14) : If the adapter is currently configured and available for WAN restoral. mis-configured (15) : If the adapter is inserted in the slot but the router configuration is of a different type. | 1.3.6.1.4.1.2.6.150.3.1.1.1.3 | INTEGER {unknown(1), not-configured(2), not-present(3), does-not-apply(4), enable-pending(5), enabled(6), disable-pending(7), disabled(8), not-initialized(9), unknown-device(10), hardware-error(11), not-powered(12), diagnostics(13), wrs-available(14), mis-configured(15)} | read-only | mandatory |
| ibmnetuGraphicTable OBJECT-TYPE A table of information mapping a slot and port to an interface table ifIndex. An entry exists in this table only if the ifConnectorPresent object is true | 1.3.6.1.4.1.2.6.150.3.1.2 | not-accessible | mandatory | |
| ibmnetuGraphicEntry OBJECT-TYPE An entry mapping slot and port to an interface table ifIndex. | 1.3.6.1.4.1.2.6.150.3.1.2.1 | not-accessible | mandatory | |
| ibmnetuGraphicSlotNum OBJECT-TYPE The number identifying a slot location where an adapter can be inserted. | 1.3.6.1.4.1.2.6.150.3.1.2.1.1 | INTEGER | read-only | mandatory |
| ibmnetuGraphicPortNum OBJECT-TYPE The number identifying a port on a given adapter. A port implies a physical connector is associated with it. | 1.3.6.1.4.1.2.6.150.3.1.2.1.2 | INTEGER | read-only | mandatory |
| ibmnetuGraphicifIndex OBJECT-TYPE The ifIndex of the interface table entry associated with this port on an adapter. By definition, the ifEntry has ifConnectorPresent = true. | 1.3.6.1.4.1.2.6.150.3.1.2.1.3 | INTEGER | read-only | mandatory |
| ibmnetuhardware400Specific OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.3.2 | |||
| ibmneturouting OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.4 | |||
| ibmnetuswitching OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.150.5 |