IBM2212-MIB
- Registered at
- 1.3.6.1.4.1.2.6.149
- Namespace
- ibm
- Source file
IBM2212-MIB- Digest
sha256:c8f66e1e8c2cabeedacec2c24f8bc701fb260c9552eb24697bb4591df7ae0017
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IBM2212-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ibm OBJECT-IDENTITY | 1.3.6.1.4.1.2 | |||
| ibmProd OBJECT-IDENTITY | 1.3.6.1.4.1.2.6 | |||
| ibm2212 OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149 | |||
| ibm2212admin OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.1 | |||
| ibm2212adminproducts OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.1.1 | |||
| ibm2212adminOID OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.1.2 | |||
| ibm2212EnetChipSet OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.1.2.1 | |||
| enetChipSetUnknown OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.1.2.1.1 | |||
| enetChipSetAMD OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.1.2.1.2 | |||
| ibm2212adminDebug OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.1.3 | |||
| ibm2212system OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.2 | |||
| ibm2212systemInfo OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.2.1 | |||
| ibm2212cfgInfo OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.2.2 | |||
| ibm2212hardware OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.3 | |||
| ibm2212hardwareGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.3.1 | |||
| ibm2212AdapTable OBJECT-TYPE A table of information about adapters in this box. | 1.3.6.1.4.1.2.6.149.3.1.1 | not-accessible | mandatory | |
| ibm2212AdapEntry OBJECT-TYPE An entry containing objects to describe the adapter in a given slot. | 1.3.6.1.4.1.2.6.149.3.1.1.1 | not-accessible | mandatory | |
| ibm2212AdapSlotNum OBJECT-TYPE The number identifying a slot location where an adapter can be inserted. The 2212 has four fixed serial ports on the system card that are designated by slot 0. | 1.3.6.1.4.1.2.6.149.3.1.1.1.1 | INTEGER (0..65535) | read-only | mandatory |
| ibm2212AdapType OBJECT-TYPE The type of adapter that is inserted into this slot. Not all of the adapter types listed above are necessarily currently available and supported. The four fixed serial ports on the system card are identified by the serial-4port-shallow(7) enumeration. If no adapter is present, the variable will take the value not-present(2). | 1.3.6.1.4.1.2.6.149.3.1.1.1.2 | INTEGER {unknown(1), not-present(2), eth-fast-1port(3), token-ring-1port(4), eth-fast-2port(5), token-ring-2port(6), serial-4port-shallow(7), isdn-bri-u-2port(8), isdn-bri-st-2port(9), isdn-pri-t1j1-1port(10), isdn-pri-e1-1port(11), compression-encryption(12), serial-4port-deep(13), isdn-pri-t1j1-2port(14), isdn-pri-e1-2port(15)} | read-only | mandatory |
| ibm2212AdapOperStatus OBJECT-TYPE The operational status of this adapter. unknown (1) : If there was problem determining the operational status of the adapter. not-present (2) : If no adapter is currently inserted. enable-pending (3) : Adapter has been identified, but not yet enabled. enabled (4) : Adapter has been identified in valid slot and has been powered on and enabled. unknown-device (5) : Adapter is powered off because it is in the wrong slot or of unknown type. config-error (6) : Adapter has been identified, powered on and enabled, but failed to read its configuration data. not-powered (7) : Adapter has been identified in valid slot but is not currently powered on. | 1.3.6.1.4.1.2.6.149.3.1.1.1.3 | INTEGER {unknown(1), not-present(2), enable-pending(3), enabled(4), unknown-device(5), hardware-error(6), not-powered(7)} | read-only | mandatory |
| ibm2212GraphicTable OBJECT-TYPE A table of information mapping a slot and port to an interface table ifIndex. An entry exists in this table only if the ifConnectorPresent object is true | 1.3.6.1.4.1.2.6.149.3.1.2 | not-accessible | mandatory | |
| ibm2212GraphicEntry OBJECT-TYPE An entry mapping slot and port to an interface table ifIndex. | 1.3.6.1.4.1.2.6.149.3.1.2.1 | not-accessible | mandatory | |
| ibm2212GraphicSlotNum OBJECT-TYPE The number identifying a slot location where an adapter can be inserted. The 2212 has four fixed serial ports on the system card that are designated by slot 0. | 1.3.6.1.4.1.2.6.149.3.1.2.1.1 | INTEGER (0..2147483647) | read-only | mandatory |
| ibm2212GraphicPortNum OBJECT-TYPE The number identifying a port on a given adapter. A port implies a physical connector is associated with it. | 1.3.6.1.4.1.2.6.149.3.1.2.1.2 | INTEGER (0..2147483647) | read-only | mandatory |
| ibm2212GraphicifIndex OBJECT-TYPE The ifIndex of the interface table entry associated with this port on an adapter. By definition, the ifEntry has ifConnectorPresent = true. | 1.3.6.1.4.1.2.6.149.3.1.2.1.3 | INTEGER | read-only | mandatory |
| ibm2212routing OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.4 | |||
| ibm2212switching OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.149.5 |