MIBs Depot

IBM-OSA-MIB

Registered at
1.3.6.1.4.1.2.6.188
Last updated
2002-05-23 00:00
Organization
IBM eServer Development
Revisions
2002-05-23 00:00, 2002-03-26 08:00
Namespace
ibm
Source file
IBM-OSA-MIB
Digest
sha256:9e360e22ee8d743c665542b7ccba3aee3f1a2f8d46d09421d9f852b35cd3f77d

Description

The IBM Enterprise Specific MIB definitions for enabling management of an IBM OSA-Express feature. Licensed Materials - Property of IBM Restricted Materials of IBM 5694-A01 (C) Copyright IBM Corp. 2002 US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Contact

Joel Goldman Postal: International Business Machines Corporation 2455 South Road Dept. B44G/Bldg. 706 Poughkeepsie, NY 12601 USA Tel: +1 845 435 5501 Internet: jgoldman@us.ibm.com

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IBM-OSA-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
ibm
OBJECT-IDENTITY
1.3.6.1.4.1.2
ibmProd
OBJECT-IDENTITY
1.3.6.1.4.1.2.6
ibmOSAMibObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.188.1
ibmOSAExpChannelTable
OBJECT-TYPE
Indexed by ifIndex. One entry in this table will exist per OSA Device Interface.
1.3.6.1.4.1.2.6.188.1.1not-accessiblecurrent
ibmOSAExpChannelEntry
OBJECT-TYPE
Definition of a single entry in the ibmOSAExpChannelTable. Indexed by the ifIndex of the corresponding Device interface.
1.3.6.1.4.1.2.6.188.1.1.1not-accessiblecurrent
ibmOSAExpChannelNumber
OBJECT-TYPE
The CHPID corresponding to this ifIndex.
1.3.6.1.4.1.2.6.188.1.1.1.1OCTET STRING (SIZE(2))read-onlycurrent
ibmOSAExpChannelType
OBJECT-TYPE
The type of channel for this interface. OSA Direct Express has a value of 17.
1.3.6.1.4.1.2.6.188.1.1.1.2INTEGER {osaDirectExpress(17)}read-onlycurrent
ibmOSAExpChannelHdwLevel
OBJECT-TYPE
Hardware model of the channel. The value oasExp150(2) indicates a hardware level of 1.50. The value oasExp175(3) indicates a hardware level of 1.75.
1.3.6.1.4.1.2.6.188.1.1.1.3INTEGER {unknown(1), osaExp150(2), osaExp175(3)}read-onlycurrent
ibmOSAExpChannelSubType
OBJECT-TYPE
Indicates the type of OSA feature present.
1.3.6.1.4.1.2.6.188.1.1.1.4INTEGER {unknown(1), gigabitEthernet(65), fastEthernet(81), tokenRing(82), atmEmulatedEthernet(2304)}read-onlycurrent
ibmOSAExpChannelShared
OBJECT-TYPE
An OSA-Express feature can be shared across multiple LPs. This object indicates if this feature is currently being shared between LPs
1.3.6.1.4.1.2.6.188.1.1.1.5INTEGER {notShared(0), shared(1)}read-onlycurrent
ibmOSAExpChannelNodeDesc
OBJECT-TYPE
This is the Node Descriptor of the OSA feature. It represents the ND obtained from the Channel Subsystem. Bits Name Flag is first byte char(1) Validity Valid - always '20'x char(1) Reserved Reserved by architecture char(1) Class Class for subsystem node char(1) CHPID CHP ID for specified int char(6) TypeNum Type number of the SDC char(3) ModelNum Model number in the form of 3 EBCDIC OCTETS char(3) Manufacturer Manufacturer in the form of 3 EBCDIC OCTETS char(2) Mfr Plant Plant of manufacture-2 digit code char(12)SeqNum Sequence number (12 EBCDIC OCTETS) char(2) Tag Tag
1.3.6.1.4.1.2.6.188.1.1.1.6OCTET STRING (SIZE(32))read-onlycurrent
ibmOSAExpChannelProcCodeLevel
OBJECT-TYPE
This is the firmware (or micro code level) of the OSA feature. For example, OSA code level 05.6A would be represented as 0x056A.
1.3.6.1.4.1.2.6.188.1.1.1.8OCTET STRING (SIZE(2))read-onlycurrent
ibmOSAExpChannelPCIBusUtil1Min
OBJECT-TYPE
The average, over a 1 minute interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks. The range for this value is from 0 to 100%.
1.3.6.1.4.1.2.6.188.1.1.1.9Integer32 (0..100)read-onlycurrent
ibmOSAExpChannelProcUtil1Min
OBJECT-TYPE
The average, over a 1 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks. The range for this value is from 0 to 100%.
1.3.6.1.4.1.2.6.188.1.1.1.10Integer32 (0..100)read-onlycurrent
ibmOSAExpChannelPCIBusUtil5Min
OBJECT-TYPE
The average, over a 5 minute interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks. The range for this value is from 0 to 100%.
1.3.6.1.4.1.2.6.188.1.1.1.11Integer32 (0..100)read-onlycurrent
ibmOSAExpChannelProcUtil5Min
OBJECT-TYPE
The average, over a 5 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks. The range for this value is from 0 to 100%.
1.3.6.1.4.1.2.6.188.1.1.1.12Integer32 (0..100)read-onlycurrent
ibmOSAExpChannelPCIBusUtilHour
OBJECT-TYPE
The average, over an hour interval, of the percentage of time that the PCI bus was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks.
1.3.6.1.4.1.2.6.188.1.1.1.13Integer32 (0..100)read-onlycurrent
ibmOSAExpChannelProcUtilHour
OBJECT-TYPE
The average, over an hour interval, of the percentage of time that the CHPID Processor was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks. The range for this value is from 0 to 100%.
1.3.6.1.4.1.2.6.188.1.1.1.14Integer32 (0..100)read-onlycurrent
ibmOSAExpPerfTable
OBJECT-TYPE
This table provides performance information for each Logical Partition (LP) the OSA can connect to.
1.3.6.1.4.1.2.6.188.1.2not-accessiblecurrent
ibmOSAExpPerfEntry
OBJECT-TYPE
Definition of a single entry for a single LP in the ibmOSAExpPerfTable. Indexed by the ifIndex of the corresponding Device interface.
1.3.6.1.4.1.2.6.188.1.2.1not-accessiblecurrent
ibmOSAExpPerfDataLP0
OBJECT-TYPE
The performance data on this OSA for partition 0. The 40 bytes of hex data that are returned are decoded as follows: Offset Bytes Field Meaning 0 4 LP Number 4 4 Processor Util 1 Minute 8 4 In Kbytes Rate 1 Minute 12 4 Out Kbytes Rate 1 Minute 16 4 Processor Util 5 Minutes 20 4 In Kbytes Rate 5 Minutes 24 4 Out Kbytes Rate 5 Minutes 28 4 Processor Util 60 Minutes 32 4 In Kbytes Rate 60 Minutes 36 4 Out Kbytes Rate 60 Minutes The Processor Util 1 Minute is defined as follows: The average, over a 1 minute interval, of the percentage of time that the CHPID Processor was utilized to transfer data for a specific LP. It does not include idle time or time used by routine maintenance tasks. The range for this value is from 0 to 100%. The In Kbytes Rate 1 Minute is defined as follows: The average, over a 1 minute interval, of the number of inbound kilobytes processed for a specific LP. The Out Kbytes Rate 1 Minute is defined as follows: The average, over a 1 minute interval, of the number of outbound kilobytes processed for a specific LP. The 5 and 60 minute fields are defined similar to the 1 minute fields, but pertain to intervals of 5 and 60 minutes.
1.3.6.1.4.1.2.6.188.1.2.1.1OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP1
OBJECT-TYPE
The performance data on this OSA for partition 1. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.2OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP2
OBJECT-TYPE
The performance data on this OSA for partition 2. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.3OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP3
OBJECT-TYPE
The performance data on this OSA for partition 3. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.4OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP4
OBJECT-TYPE
The performance data on this OSA for partition 4. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.5OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP5
OBJECT-TYPE
The performance data on this OSA for partition 5. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.6OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP6
OBJECT-TYPE
The performance data on this OSA for partition 6. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.7OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP7
OBJECT-TYPE
The performance data on this OSA for partition 7. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.8OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP8
OBJECT-TYPE
The performance data on this OSA for partition 8. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.9OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP9
OBJECT-TYPE
The performance data on this OSA for partition 9. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.10OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP10
OBJECT-TYPE
The performance data on this OSA for partition 10. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.11OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP11
OBJECT-TYPE
The performance data on this OSA for partition 11. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.12OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP12
OBJECT-TYPE
The performance data on this OSA for partition 12. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.13OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP13
OBJECT-TYPE
The performance data on this OSA for partition 13. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.14OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP14
OBJECT-TYPE
The performance data on this OSA for partition 14. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.15OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPerfDataLP15
OBJECT-TYPE
The performance data on this OSA for partition 15. The 40 bytes of hex data that are returned are decoded the same as for partition 0.
1.3.6.1.4.1.2.6.188.1.2.1.16OCTET STRING (SIZE(40))read-onlycurrent
ibmOSAExpPETable
OBJECT-TYPE
This table provides PE information to help IBM diagnose any OSA problems.
1.3.6.1.4.1.2.6.188.1.3not-accessiblecurrent
ibmOSAExpPEEntry
OBJECT-TYPE
Definition of a single entry in the ibmOSAExpPETable. Indexed by the ifIndex of the corresponding Device interface
1.3.6.1.4.1.2.6.188.1.3.1not-accessiblecurrent
ibmOSAExpPEMaxSizeArpCache
OBJECT-TYPE
The maximum size of the OSA ARP Cache
1.3.6.1.4.1.2.6.188.1.3.1.1Integer32 (0..214783647)read-onlycurrent
ibmOSAExpPEArpPendingEntries
OBJECT-TYPE
This is the number of Pending entries in the ARP cache.
1.3.6.1.4.1.2.6.188.1.3.1.2Gauge32read-onlycurrent
ibmOSAExpPEArpActiveEntries
OBJECT-TYPE
This the number of active ARP entries.
1.3.6.1.4.1.2.6.188.1.3.1.3Gauge32read-onlycurrent
ibmOSAExpPEIPEntries
OBJECT-TYPE
The number of IP addresses known to the OSA For OSD chpids, this is the maximum # of IP addresses that are: - home ip addresses (Version 4 and Version 6) - remote ip addresses in the arp cache (Version 4 only) - multicast ip addresses that the OSA must accept inbound data packets for (Version 4 and Version 6)
1.3.6.1.4.1.2.6.188.1.3.1.4Gauge32read-onlycurrent
ibmOSAExpPEMulticastEntries
OBJECT-TYPE
This is the number of IP multicast addresses currently on the OSA
1.3.6.1.4.1.2.6.188.1.3.1.5Gauge32read-onlycurrent
ibmOSAExpPEMulticastData
OBJECT-TYPE
This contains information on the multicast entries that are currently on the OSA. These are in a format that is for IBM use only
1.3.6.1.4.1.2.6.188.1.3.1.6OCTET STRING (SIZE(3360))read-onlycurrent
ibmOSAExpEthPortTable
OBJECT-TYPE
This table represents the data associated with a port on an OSA-Express Gigabit or Fast Ethernet OSA.
1.3.6.1.4.1.2.6.188.1.4not-accessiblecurrent
ibmOSAExpEthPortEntry
OBJECT-TYPE
Definition of a single entry in the ibmOSAExpEthPortTable. Indexed by the ifIndex of the corresponding Device interface.
1.3.6.1.4.1.2.6.188.1.4.1not-accessiblecurrent
ibmOsaExpEthPortNumber
OBJECT-TYPE
The physical port number for this port.
1.3.6.1.4.1.2.6.188.1.4.1.1Integer32 (0..3)read-onlycurrent
ibmOsaExpEthPortType
OBJECT-TYPE
The physical port type.
1.3.6.1.4.1.2.6.188.1.4.1.2INTEGER {gigabitEthernet(65), fastEthernet(81)}read-onlycurrent
ibmOsaExpEthLanTrafficState
OBJECT-TYPE
The LAN state value ranges from 0 to 8. A value of 5, disabled is further explained in object ibmOsaExpEthDisabledStatus.
1.3.6.1.4.1.2.6.188.1.4.1.3INTEGER {undefined(0), unavailable(1), enabling(2), disabling(3), enabled(4), disabled(5), linkMonitor(6), definitionError(7), configuredOffline(8)}read-onlycurrent
ibmOsaExpEthServiceMode
OBJECT-TYPE
This object indicates if the processor is in service mode or not.
1.3.6.1.4.1.2.6.188.1.4.1.4INTEGER {notInServiceMode(0), inServiceMode(1)}read-onlycurrent
ibmOsaExpEthDisabledStatus
OBJECT-TYPE
When the value of ibmOsaExpEthLanTrafficState is NOT disabled, the value of this object will be zero. When the value of ibmOsaExpEthLanTrafficState is disabled(5), this object explains the reason for the disabled state. The value for this object may be a combination of the bits shown.
1.3.6.1.4.1.2.6.188.1.4.1.5Bits {reserved0(0), internalPortFailure(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), portTemporarilyDisabled(6), reserved7(7), reserved8(8), serviceProcessorRequest(9), networkRequest(10), osasfRequest(11), configurationChange(12), linkFailureThresholdExceeded(13), reserved14(14), reserved15(15)}read-onlycurrent
ibmOsaExpEthConfigName
OBJECT-TYPE
This is the name of the configuration that is on the OSA. It is set using OSA/SF. It is not used by OSA
1.3.6.1.4.1.2.6.188.1.4.1.6DisplayString (SIZE(0..34))read-onlycurrent
ibmOsaExpEthConfigSpeedMode
OBJECT-TYPE
The configured port speed. This field shows the speed that was configured by the user for the OSA-Express Fast Ethernet feature. It is not used by OSA-Express Gigabit features and will return -1 (FFFF)
1.3.6.1.4.1.2.6.188.1.4.1.7INTEGER {notValidGigabit(-1), autoNegotiate(0), tenMbHalfDuplex(1), tenMbFullDuplex(2), oneHundredMbHalfDuplex(3), oneHundredMbFullDuplex(4), oneThousandMbFullDuplex(6)}read-onlycurrent
ibmOsaExpEthActiveSpeedMode
OBJECT-TYPE
The actual speed and mode the OSA is running in
1.3.6.1.4.1.2.6.188.1.4.1.8INTEGER {unknown(0), tenMbHalfDuplex(1), tenMbFullDuplex(2), oneHundredMbHalfDuplex(3), oneHundredMbFullDuplex(4), oneThousandMbFullDuplex(6)}read-onlycurrent
ibmOsaExpEthMacAddrActive
OBJECT-TYPE
A 6 byte OCTET STRING which contains the current MAC address in use on the adapter. The values are in canonical format.
1.3.6.1.4.1.2.6.188.1.4.1.9OCTET STRING (SIZE(6))read-onlycurrent
ibmOsaExpEthMacAddrBurntIn
OBJECT-TYPE
A 6 byte OCTET STRING which contains the burned in MAC address on the OSA. The values are in canonical format.
1.3.6.1.4.1.2.6.188.1.4.1.10OCTET STRING (SIZE(6))read-onlycurrent
ibmOsaExpEthUserData
OBJECT-TYPE
Data set by the user. It is ignored by the OSA.
1.3.6.1.4.1.2.6.188.1.4.1.11DisplayString (SIZE(0..32))read-onlycurrent
ibmOsaExpEthOutPackets
OBJECT-TYPE
This is the number of packets that have been transmitted by the OSA since the last time the OSA port was reset
1.3.6.1.4.1.2.6.188.1.4.1.12Counter32read-onlycurrent
ibmOsaExpEthInPackets
OBJECT-TYPE
This is the number of packets that have been received by the OSA since the last time the OSA port was reset
1.3.6.1.4.1.2.6.188.1.4.1.13Counter32read-onlycurrent
ibmOsaExpEthInGroupFrames
OBJECT-TYPE
This is the number of multicast frames that have been received by the OSA.
1.3.6.1.4.1.2.6.188.1.4.1.14Counter32read-onlycurrent
ibmOsaExpEthInBroadcastFrames
OBJECT-TYPE
This is the number of broadcast frames that have been received by the OSA.
1.3.6.1.4.1.2.6.188.1.4.1.15Counter32read-onlycurrent
ibmOsaExpEthPortName
OBJECT-TYPE
Name of the port as used by TCP/IP
1.3.6.1.4.1.2.6.188.1.4.1.16DisplayString (SIZE(0..8))read-onlycurrent
ibmOsaExpEthInUnknownIPFrames
OBJECT-TYPE
This is the number of non-IP received frames
1.3.6.1.4.1.2.6.188.1.4.1.17Counter32read-onlycurrent
ibmOsaExpEthGroupAddrTable
OBJECT-TYPE
This field contains the active Group Addresses. An individual Group Address is 6 bytes long with an additional 2 bytes of padding. There are 32 group addresses.
1.3.6.1.4.1.2.6.188.1.4.1.18OCTET STRING (SIZE(256))read-onlycurrent
ibmOSAExpTRPortTable
OBJECT-TYPE
This table represents the data associated with a port on an OSA-Express token ring feature.
1.3.6.1.4.1.2.6.188.1.5not-accessiblecurrent
ibmOSAExpTRPortEntry
OBJECT-TYPE
Definition of a single entry in the ibmOSAExpTRPortTable. Indexed by the ifIndex of the corresponding Device interface.
1.3.6.1.4.1.2.6.188.1.5.1not-accessiblecurrent
ibmOsaExpTRPortNumber
OBJECT-TYPE
The physical port number for this port.
1.3.6.1.4.1.2.6.188.1.5.1.1Integer32 (0..3)read-onlycurrent
ibmOsaExpTRPortType
OBJECT-TYPE
The physical port type.
1.3.6.1.4.1.2.6.188.1.5.1.2INTEGER {tokenring(82)}read-onlycurrent
ibmOsaExpTRLanTrafficState
OBJECT-TYPE
The LAN state value ranges from 0 to 8. A value of 5, disabled is further explained in object ibmOsaExpTRDisabledStatus
1.3.6.1.4.1.2.6.188.1.5.1.3INTEGER {undefined(0), unavailable(1), enabling(2), disabling(3), enabled(4), disabled(5), linkMonitor(6), definitionError(7), configuredOffline(8)}read-onlycurrent
ibmOsaExpTRServiceMode
OBJECT-TYPE
This object indicates if the processor is in service mode or not.
1.3.6.1.4.1.2.6.188.1.5.1.4INTEGER {notInServiceMode(0), inServiceMode(1)}read-onlycurrent
ibmOsaExpTRDisabledStatus
OBJECT-TYPE
When the value of ibmOsaExpTRLanTrafficState is NOT disabled, the value of this object will be zero. When the value of ibmOsaExpTRLanTrafficState is disabled(5), this object explains the reason for the disabled state. The value for this object may be a combination of the bits shown.
1.3.6.1.4.1.2.6.188.1.5.1.5Bits {reserved0(0), internalPortFailure(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), portTemporarilyDisabled(6), reserved7(7), reserved8(8), serviceProcessorRequest(9), networkRequest(10), osasfRequest(11), configurationChange(12), linkFailureThresholdExceeded(13), reserved14(14), reserved15(15)}read-onlycurrent
ibmOsaExpTRConfigName
OBJECT-TYPE
This is the name of the configuration that is on the OSA. It is set using OSA/SF. It is not used by OSA
1.3.6.1.4.1.2.6.188.1.5.1.6DisplayString (SIZE(0..34))read-onlycurrent
ibmOsaExpTRMacAddrActive
OBJECT-TYPE
A 6 byte OCTET STRING which contains the current MAC address in use on the OSA.
1.3.6.1.4.1.2.6.188.1.5.1.7OCTET STRING (SIZE(6))read-onlycurrent
ibmOsaExpTRMacAddrBurntIn
OBJECT-TYPE
A 6 byte OCTET STRING which contains the burned in MAC address on the OSA
1.3.6.1.4.1.2.6.188.1.5.1.8OCTET STRING (SIZE(6))read-onlycurrent
ibmOsaExpTRConfigSpeedMode
OBJECT-TYPE
The configured port speed. This field shows the speed that was configured by the user for the OSA-Express Token Ring feature.
1.3.6.1.4.1.2.6.188.1.5.1.9INTEGER {autoNegotiate(0), fourMbHalfDuplex(1), fourMbFullDuplex(2), sixteenMbHalfDuplex(3), sixteenMbFullDuplex(4), oneHundredMbFullDuplex(6)}read-onlycurrent
ibmOsaExpTRActiveSpeedMode
OBJECT-TYPE
The actual speed and mode the OSA is running in
1.3.6.1.4.1.2.6.188.1.5.1.10INTEGER {unknown(0), fourMbHalfDuplex(1), fourMbFullDuplex(2), sixteenMbHalfDuplex(3), sixteenMbFullDuplex(4), oneHundredMbFullDuplex(6)}read-onlycurrent
ibmOsaExpTRUserData
OBJECT-TYPE
Data set by the user. It is ignored by the OSA.
1.3.6.1.4.1.2.6.188.1.5.1.11DisplayString (SIZE(0..32))read-onlycurrent
ibmOsaExpTRPortName
OBJECT-TYPE
Name of the port as used by TCP/IP
1.3.6.1.4.1.2.6.188.1.5.1.12DisplayString (SIZE(0..8))read-onlycurrent
ibmOsaExpTRGroupAddrTable
OBJECT-TYPE
This field contains the active Group Addresses. An individual Group Address is 6 bytes long with an additional 2 bytes of padding.
1.3.6.1.4.1.2.6.188.1.5.1.13OCTET STRING (SIZE(256))read-onlycurrent
ibmOsaExpTRFunctionalAddr
OBJECT-TYPE
A 4 byte OCTET STRING which contains the OSA-Express's functional address.
1.3.6.1.4.1.2.6.188.1.5.1.14OCTET STRING (SIZE(4))read-onlycurrent
ibmOsaExpTRRingStatus
OBJECT-TYPE
The current interface status which can be used to diagnose fluctuating problems that can occur on token rings after a station has successfully been added to the ring. Before an open is completed, this object has the value for the 'noStatusOpenNotCompleted' condition. The ibmOsaExpTRRingState and ibmOsaExpTRRingOpenStatus objects provide for debugging problems when the station can not even enter the ring. The object's value is a sum of values, one for each currently applicable condition. This information is essentially from RFC 1231.
1.3.6.1.4.1.2.6.188.1.5.1.15Bits {reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), noStatusOpenNotCompleted(14), reserved15(15), signalLoss(16), hardError(17), softError(18), reserved19(19), lobeWireFault(20), autoRemovalError(21), fdxProtocol(22), removeReceived(23), counterOverflow(24), singleStation(25), ringRecovery(26), sRCounterOverflow(27), reserved29(28), openInFDXmode(29), fourMbFullDuplex(30), fourMbHalfDuplex(31)}read-onlycurrent
ibmOsaExpTRAllowAccessPriority
OBJECT-TYPE
This field contains the maximum token priority the ring station defined by this entry in the table is permitted to transmit.
1.3.6.1.4.1.2.6.188.1.5.1.16Integer32read-onlycurrent
ibmOsaExpTREarlyTokenRelease
OBJECT-TYPE
Indicates if the ring station supports early token release. Only valid when port is running in 16Mb half duplex mode. Otherwise it is always set to false (1)
1.3.6.1.4.1.2.6.188.1.5.1.17INTEGER {true(0), false(1)}read-onlycurrent
ibmOsaExpTRBeaconingAddress
OBJECT-TYPE
This field contains the node address of the NAUN as reported in the most recently received Beacon MAC frame. This field is valid when ibmOsaExpTRRingOpenStatus is set to beaconing. Otherwise it is ignored
1.3.6.1.4.1.2.6.188.1.5.1.18OCTET STRING (SIZE(6))read-onlycurrent
ibmOsaExpTRUpstreamNeighbor
OBJECT-TYPE
The MAC-address of the up stream neighbor station in the ring (NAUN).
1.3.6.1.4.1.2.6.188.1.5.1.19OCTET STRING (SIZE(6))read-onlycurrent
ibmOsaExpTRRingState
OBJECT-TYPE
The current interface state with respect to entering or leaving the ring.
1.3.6.1.4.1.2.6.188.1.5.1.20INTEGER {opened(1), closed(2), opening(3), closing(4), openFailure(5), ringFailure(6)}read-onlycurrent
ibmOsaExpTRRingOpenStatus
OBJECT-TYPE
This object indicates the success, or the reason for failure of the station's most recent attempt to enter the ring.
1.3.6.1.4.1.2.6.188.1.5.1.21INTEGER {noOpen(1), badParameter(2), lobeFailed(3), signalLoss(4), insertionTimeout(5), ringFailed(6), beaconing(7), duplicateMAC(8), requestFailed(9), removeReceived(10), open(11), sARecFrameNotEqualNAUNs(12), claimTokenRec(13), ringPurgeFramRec(14), activeMonPresRec(15), standbyMonPresRec(16), accessProtocolDenied(17), fDXInsDeniedDACfailOnOpen(18), fDXInsDeniedDACfailOnBeaconTest(19), beaconBeforeOpen(20), insertTimerExpDuringDAC(21), insertTimerExpDuringBeaconTest(22), lobeMedizTestFailure(23), heartbeatFailBeforeOpenCompleted(24), heartbeatFailDuringBeaconTest(25), recBeaconFrameWithInvalidSA(26)}read-onlycurrent
ibmOsaExpTRPacketsTransmitted
OBJECT-TYPE
This field contains the count of the total number of packets transmitted from this port since the OSA port was reset
1.3.6.1.4.1.2.6.188.1.5.1.22Counter32read-onlycurrent
ibmOsaExpTRPacketsReceived
OBJECT-TYPE
This field contains the count of the total number of packets received by this port since the OSA port was reset
1.3.6.1.4.1.2.6.188.1.5.1.23Counter32read-onlycurrent
ibmOsaExpTRLineErrorCount
OBJECT-TYPE
This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditions exists: 1) there is a non-data bit (J or K bit) between the SD and the ED of the frame or token, or 2) there is an FCS error in the frame.
1.3.6.1.4.1.2.6.188.1.5.1.24Counter32read-onlycurrent
ibmOsaExpTRBurstErrorCount
OBJECT-TYPE
This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error).
1.3.6.1.4.1.2.6.188.1.5.1.25Counter32read-onlycurrent
ibmOsaExpTRACErrorCount
OBJECT-TYPE
This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is equal to C is equal to 0 without first receiving an AMP frame. It denotes a station that cannot set the AC bits properly.
1.3.6.1.4.1.2.6.188.1.5.1.26Counter32read-onlycurrent
ibmOsaExpTRAbortTransErrorCount
OBJECT-TYPE
This counter is incremented when a station transmits an abort delimiter while transmitting.
1.3.6.1.4.1.2.6.188.1.5.1.27Counter32read-onlycurrent
ibmOsaExpTRInternalErrorCount
OBJECT-TYPE
This counter is incremented when a station recognizes an internal error.
1.3.6.1.4.1.2.6.188.1.5.1.28Counter32read-onlycurrent
ibmOsaExpTRLostFrameErrorCount
OBJECT-TYPE
This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition transmitting station in strip mode does not receive the trailer of the frame TRR timer goes off.
1.3.6.1.4.1.2.6.188.1.5.1.29Counter32read-onlycurrent
ibmOsaExpTRRcvCongestionCount
OBJECT-TYPE
This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station is congested.
1.3.6.1.4.1.2.6.188.1.5.1.30Counter32read-onlycurrent
ibmOsaExpTRFrameCopyErrorCount
OBJECT-TYPE
This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a possible line hit or duplicate address.
1.3.6.1.4.1.2.6.188.1.5.1.31Counter32read-onlycurrent
ibmOsaExpTRTokenErrorCount
OBJECT-TYPE
This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted.
1.3.6.1.4.1.2.6.188.1.5.1.32Counter32read-onlycurrent
ibmOsaExpTRFullDuplexErrorCount
OBJECT-TYPE
An error has been detected by the FDX protocol
1.3.6.1.4.1.2.6.188.1.5.1.33Counter32read-onlycurrent
ibmOsaExpTRSoftErrorCount
OBJECT-TYPE
The number of Soft Errors the interface has detected. It directly corresponds to the number of Report Error MAC frames that this interface has transmitted. Soft Errors are those which are recoverable by the MAC layer protocols.
1.3.6.1.4.1.2.6.188.1.5.1.34Counter32read-onlycurrent
ibmOsaExpTRHardErrorCount
OBJECT-TYPE
The number of times this interface has detected an immediately recoverable fatal error. It denotes the number of times this interface is either transmitting or receiving beacon MAC frames.
1.3.6.1.4.1.2.6.188.1.5.1.35Counter32read-onlycurrent
ibmOsaExpTRSignalLossErrorCount
OBJECT-TYPE
The number of times this interface has detected the loss of signal condition from the ring.
1.3.6.1.4.1.2.6.188.1.5.1.36Counter32read-onlycurrent
ibmOsaExpTRTransmitBeaconCount
OBJECT-TYPE
The number of times this interface has transmitted a beacon frame.
1.3.6.1.4.1.2.6.188.1.5.1.37Counter32read-onlycurrent
ibmOsaExpTRRecoveryCounter
OBJECT-TYPE
The number of Claim Token MAC frames received or transmitted after the interface has received a frame Ring Ring Purge MAC counter signifies the number of times the ring has been purged and is being recovered back into a normal operating state.
1.3.6.1.4.1.2.6.188.1.5.1.38Counter32read-onlycurrent
ibmOsaExpTRLobeWireFaultCount
OBJECT-TYPE
The number of times the interface has detected an open or short circuit in the lobe data path. The adapter will be closed and ibmOsaExpTRRingState will signify this condition.
1.3.6.1.4.1.2.6.188.1.5.1.39Counter32read-onlycurrent
ibmOsaExpTRRemoveReceivedCount
OBJECT-TYPE
The number of times the interface has received a Remove Ring Station MAC frame request. When this frame is received the interface will enter the closed state and ibmOsaExpTRRingState will signify this condition.
1.3.6.1.4.1.2.6.188.1.5.1.40Counter32read-onlycurrent
ibmOsaExpTRSingleStationCount
OBJECT-TYPE
The number of times the interface has sensed that it is the only station on the ring. This will happen if the interface is the first one up on a ring, or if there is a hardware problem.
1.3.6.1.4.1.2.6.188.1.5.1.41Counter32read-onlycurrent
ibmOSAExpATMPortTable
OBJECT-TYPE
This table represents the data associated with an emulated Ethernet port on an OSA-Express ATM feature. There are a maximum of 2 logical ports on each ATM feature, however, each port is shown as though it exists independently with each having an entry in the ibmOSAExpChannelTable.
1.3.6.1.4.1.2.6.188.1.7not-accessiblecurrent
ibmOSAExpATMPortEntry
OBJECT-TYPE
Definition of a single entry in the ibmOSAExpATMPortTable. Indexed by the ifIndex of the corresponding Device interface.
1.3.6.1.4.1.2.6.188.1.7.1not-accessiblecurrent
ibmOsaExpATMPortNumber
OBJECT-TYPE
The logical port number of this port
1.3.6.1.4.1.2.6.188.1.7.1.1Integer32 (0..3)read-onlycurrent
ibmOsaExpATMPortType
OBJECT-TYPE
The logical port type.
1.3.6.1.4.1.2.6.188.1.7.1.2INTEGER {emulatedEthernet(17)}read-onlycurrent
ibmOsaExpATMLanTrafficState
OBJECT-TYPE
The LAN state value ranges from 0 to 8. A value of 5, disabled is further explained in object ibmOsaExpATMDisabledStatus.
1.3.6.1.4.1.2.6.188.1.7.1.3INTEGER {undefined(0), unavailable(1), enabling(2), disabling(3), enabled(4), disabled(5), linkMonitor(6), definitionError(7), configuredOffline(8)}read-onlycurrent
ibmOsaExpATMServiceMode
OBJECT-TYPE
This object indicates if the processor is in service mode or not.
1.3.6.1.4.1.2.6.188.1.7.1.4INTEGER {notInServiceMode(0), inServiceMode(1)}read-onlycurrent
ibmOsaExpATMDisabledStatus
OBJECT-TYPE
When the value of ibmOsaExpATMLanTrafficState is NOT disabled, the value of this object will be zero. When the value of ibmOsaExpATMLanTrafficState is disabled(5), this object explains the reason for the disabled state. The value for this object may be a combination of the bits shown.
1.3.6.1.4.1.2.6.188.1.7.1.5Bits {reserved0(0), internalPortFailure(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), portTemporarilyDisabled(6), reserved7(7), reserved8(8), serviceProcessorRequest(9), networkRequest(10), osasfRequest(11), configurationChange(12), linkFailureThresholdExceeded(13), reserved14(14), reserved15(15)}read-onlycurrent
ibmOsaExpATMConfigName
OBJECT-TYPE
This is the name of the configuration that is on the OSA. It is set using OSA/SF. It is not used by OSA
1.3.6.1.4.1.2.6.188.1.7.1.6DisplayString (SIZE(0..34))read-onlycurrent
ibmOsaExpATMMacAddrActive
OBJECT-TYPE
A 6 byte OCTET STRING which contains the current MAC address in use on the OSA. The values are in canonical format.
1.3.6.1.4.1.2.6.188.1.7.1.7OCTET STRING (SIZE(6))read-onlycurrent
ibmOsaExpATMMacAddrBurntIn
OBJECT-TYPE
A 6 byte OCTET STRING which contains the burned in MAC address on the OSA. The values are in canonical format.
1.3.6.1.4.1.2.6.188.1.7.1.8OCTET STRING (SIZE(6))read-onlycurrent
ibmOsaExpATMUserData
OBJECT-TYPE
Data set by the user. It is ignored by the OSA.
1.3.6.1.4.1.2.6.188.1.7.1.9DisplayString (SIZE(0..32))read-onlycurrent
ibmOsaExpATMPortName
OBJECT-TYPE
Name of the port as used by TCP/IP
1.3.6.1.4.1.2.6.188.1.7.1.12DisplayString (SIZE(0..8))read-onlycurrent
ibmOsaExpATMGroupMacAddrTable
OBJECT-TYPE
This field contains the active Group Addresses. An individual Group Address is 6 bytes long with an additional 2 bytes of padding.
1.3.6.1.4.1.2.6.188.1.7.1.13OCTET STRING (SIZE(256))read-onlycurrent
ibmOsaExpATMIBMEnhancedMode
OBJECT-TYPE
When set to Yes, this keeps data connections active when the connection to the LES is lost.
1.3.6.1.4.1.2.6.188.1.7.1.14INTEGER {no(0), yes(1)}read-onlycurrent
ibmOsaExpATMBestEffortPeakRate
OBJECT-TYPE
Values range from 10-1550 and must be divided by 10 to get the proper value. A value of 1550 indicates 155.0 Mbytes/sec
1.3.6.1.4.1.2.6.188.1.7.1.15Integer32read-onlycurrent
ibmOsaExpATMConfigMode
OBJECT-TYPE
Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. In automatic (1) mode, a client uses a LAN Emulation Configuration Server to learn the ATM address of its LAN Emulation Server, and to obtain other parameters. lecConfig (LanType, MaxDataFrameSize, LanName) are used in the configure request. ibmOsaExpATMConfigLESATMAddress is ignored. In manual (2) mode, management tells the client the ATM address of its LAN Emulation Server and the value of the other parmeters. lecConfig (LanType, MaxDataFrameSize, LanName) are used in the Join request. ibmOsaExpATMConfigLESATMAddress tells the client which LES to call.
1.3.6.1.4.1.2.6.188.1.7.1.16INTEGER {automatic(1), manual(2)}read-onlycurrent
ibmOsaExpATMConfigLanType
OBJECT-TYPE
The logical port type that the user configured the port for
1.3.6.1.4.1.2.6.188.1.7.1.17INTEGER {emulatedEthernet(17)}read-onlycurrent
ibmOsaExpATMActualLanType
OBJECT-TYPE
The actual logical port type the port is running in
1.3.6.1.4.1.2.6.188.1.7.1.18INTEGER {emulatedEthernet(17)}read-onlycurrent
ibmOsaExpATMConfigMaxDataFrmSz
OBJECT-TYPE
The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their configure requests. Manually configured clients use it in their join requests.
1.3.6.1.4.1.2.6.188.1.7.1.19INTEGER {unspecified(1), f1516(2), f4544(3), f9234(4), f18190(5)}read-onlycurrent
ibmOsaExpATMActualMaxDataFrmSz
OBJECT-TYPE
The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their configure requests. Manually configured clients use it in their join requests.
1.3.6.1.4.1.2.6.188.1.7.1.20INTEGER {unspecified(1), f1516(2), f4544(3), f9234(4), f18190(5)}read-onlycurrent
ibmOsaExpATMConfigELANName
OBJECT-TYPE
The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their configure requests. Manually configured clients use it in their join requests.
1.3.6.1.4.1.2.6.188.1.7.1.21DisplayString (SIZE(0..36))read-onlycurrent
ibmOsaExpATMActualELANName
OBJECT-TYPE
The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their configure requests. Manually configured clients use it in their join requests.
1.3.6.1.4.1.2.6.188.1.7.1.22DisplayString (SIZE(0..36))read-onlycurrent
ibmOsaExpATMConfigLESATMAddress
OBJECT-TYPE
The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When ibmOsaExpATMConfigMode is 'automatic', there is no need to set this address, Address) and no advantage to doing so. The client will use the LECS to find a LES, putting the auto-configured address in ibmOsaExpATMActualLESATMAddress while leaving ibmOsaExpATMConfigLESATMAddress alone. Corresponds to Initial State Parameter C9. In LAN Emulation MIB, the OCTET STRING has length 0 or 20. For OSA, the length shall be 20, with the value 0 defined to mean that ibmOsaExpATMConfigMode is 'automatic'.
1.3.6.1.4.1.2.6.188.1.7.1.23OCTET STRING (SIZE(20))read-onlycurrent
ibmOsaExpATMActualLESATMAddress
OBJECT-TYPE
The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When lecConfigMode is 'automatic', there is no need to set this address, Address) and no advantage to doing so. The client will use the LECS to find a LES, putting the auto-configured address in ibmOsaExpATMActualLESATMAddress while leaving ibmOsaExpATMConfigLESATMAddress alone. Corresponds to Initial State Parameter C9. In LAN Emulation MIB, the OCTET STRING has length 0 or 20. For OSA, the length shall be 20, with the value 0 defined to mean that ibmOsaExpATMConfigMode is 'automatic'.
1.3.6.1.4.1.2.6.188.1.7.1.24OCTET STRING (SIZE(20))read-onlycurrent
ibmOsaExpATMControlTimeout
OBJECT-TYPE
Control Time-out. Time out period used for timing out most request/response control frame interactions, as specified elsewhere in the LAN Emulation specification. This time value is expressed in seconds. Corresponds to Initial State Parameter C7.
1.3.6.1.4.1.2.6.188.1.7.1.25Integer32 (10..300)read-onlycurrent
ibmOsaExpATMMaxUnknownFrameCount
OBJECT-TYPE
Maximum Unknown Frame Count. See the description of ibmOsaExpATMMaxUnknownFrameTime below. Corresponds to Initial State Parameter C10.
1.3.6.1.4.1.2.6.188.1.7.1.26Integer32 (1..10)read-onlycurrent
ibmOsaExpATMMaxUnknownFrameTime
OBJECT-TYPE
Maximum Unknown Frame Time. Within the period of time defined by the Maximum Unknown Frame Time, a LE Client will send no more than Maximum Unknown Frame Count frames to the BUS for a given unicast LAN Destination, and it must also initiate the address resolution protocol to resolve that LAN Destination. This time value is expressed in seconds. Corresponds to Initial State Parameter C11.
1.3.6.1.4.1.2.6.188.1.7.1.27Integer32 (1..60)read-onlycurrent
ibmOsaExpATMVCCTimeoutPeriod
OBJECT-TYPE
VCC Time-out Period. A LE Client SHOULD release any Data Direct VCC that it has not used to transmit or receive any data frames for the length of the VCC Time-out Period. This parameter is only meaningful for SVC Data Direct VCCs. This time value is expressed in seconds. The default value is 20 minutes. A value of 0 seconds means that the timeout period is infinite. Negative values will be rejected by the agent. Corresponds to Initial State Parameter C12.
1.3.6.1.4.1.2.6.188.1.7.1.28Integer32read-onlycurrent
ibmOsaExpATMMaxRetryCount
OBJECT-TYPE
Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Count times, after the first LE_ARP_REQUEST for that same frame's LAN destination. Corresponds to Initial State Parameter C13.
1.3.6.1.4.1.2.6.188.1.7.1.29Counter32read-onlycurrent
ibmOsaExpATMAgingTime
OBJECT-TYPE
Aging Time. The maximum time that a LE Client will maintain an entry in its LE_ARP cache in the absence of a verification of that relationship. This time value is expressed in seconds. Corresponds to Initial State Parameter C17.
1.3.6.1.4.1.2.6.188.1.7.1.30Integer32 (10..300)read-onlycurrent
ibmOsaExpATMForwardDelayTime
OBJECT-TYPE
Forward Delay Time. The maximum time that a LE Client will maintain an entry for a non-local MAC address in its LE_ARP cache in the absence of a verification of that relationship, as long as the Topology Change flag C19 is true. ibmOsaExpATMForwardDelayTime SHOULD BE less than ibmOsaExpATMAgingTIme. When it is not, ibmOsaExpATMAgingTime governs LE_ARP aging. This time value is expressed in seconds. Corresponds to Initial State Parameter C18.
1.3.6.1.4.1.2.6.188.1.7.1.31Integer32 (4..30)read-onlycurrent
ibmOsaExpATMExpectedARPRespTime
OBJECT-TYPE
Expected LE_ARP Reponse Time. The maximum time that the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE cycle to take. Used for retries and verifies. This time value is expressed in seconds. Corresponds to Initial State Parameter C20.
1.3.6.1.4.1.2.6.188.1.7.1.32Integer32 (1..30)read-onlycurrent
ibmOsaExpATMFlushTimeout
OBJECT-TYPE
Flush Time-out. Time limit to wait to receive a LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action. This time value is expressed in seconds. Corresponds to Initial State Parameter C21.
1.3.6.1.4.1.2.6.188.1.7.1.33Integer32 (1..4)read-onlycurrent
ibmOsaExpATMPathSwitchingDelay
OBJECT-TYPE
Path Switching Delay. The time since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or delivered to the recipient. May be used to bypass the Flush protocol. This time value is expressed in seconds. Corresponds to Initial State Parameter C22.
1.3.6.1.4.1.2.6.188.1.7.1.34Integer32 (1..8)read-onlycurrent
ibmOsaExpATMLocalSegmentID
OBJECT-TYPE
Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges. Corresponds to Initial State Parameter C23.
1.3.6.1.4.1.2.6.188.1.7.1.35Integer32 (0..4095)read-onlycurrent
ibmOsaExpATMMltcstSendVCCType
OBJECT-TYPE
Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used by the LE Client when specifying traffic parameters when it sets up the Multicast Send VCC for this emulated LAN. Corresponds to Initial State Parameter C24.
1.3.6.1.4.1.2.6.188.1.7.1.36INTEGER {bestEffort(1), variableBitRate(2), constantBitRate(3)}read-onlycurrent
ibmOsaExpATMMltcstSendVCCAvgRate
OBJECT-TYPE
Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when estabishing the Multicast Send VCC. Forward and Backward Sustained Cell Rate to be requested by LE Client when setting up Multicast Send VCC, if using Variable bit rate codings. Corresponds to Initial State Parameter C25.
1.3.6.1.4.1.2.6.188.1.7.1.37Integer32read-onlycurrent
ibmOsaExpATMMcastSendVCCPeakRate
OBJECT-TYPE
Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Peak Cell Rate to be requested by LE Client when setting up the Multicast Send VCC when using either Variable or Constant bit rate codings. Corresponds to Initial State Parameter C26.
1.3.6.1.4.1.2.6.188.1.7.1.38Integer32read-onlycurrent
ibmOsaExpATMConnectCompleteTimer
OBJECT-TYPE
Connection Complete Timer. Optional. In Connection Establish ment this is the time period in which data or a READY_IND message is expected from a Calling Party. This time value is expressed in seconds. Corresponds to Initial State Parameter C28.
1.3.6.1.4.1.2.6.188.1.7.1.39Integer32 (1..10)read-onlycurrent
ibmOsaExpATMClientATMAddress
OBJECT-TYPE
LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Control Direct and Multicast Send VCCs, and may also be used to set up Data Direct VCCs. A client may have additional ATM addresses for use with Data Direct VCCs. Corresponds to Initial State Parameter C1.
1.3.6.1.4.1.2.6.188.1.7.1.40OCTET STRING (SIZE(20))read-onlycurrent
ibmOsaExpATMClientIdentifier
OBJECT-TYPE
LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppression on multicast data frames sent by that LE Client. This value MUST NOT change without terminating the LE Client and returning to the Initial state. A valid LECID MUST be in the range X'0001' through X'FEFF'. The value of this object is only meaningful for a LEC that is connected to a LES. For a LEC which does not belong to an emulated LAN, the value of this object is defined to be 0. Corresponds to Initial State Parameter C14.
1.3.6.1.4.1.2.6.188.1.7.1.41Integer32 (0..65279)read-onlycurrent
ibmOsaExpATMClientCurrentState
OBJECT-TYPE
The current state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, this field is 'operational'.
1.3.6.1.4.1.2.6.188.1.7.1.42INTEGER {initialState(1), lecsConnect(2), configure(3), join(4), initialRegistration(5), busConnect(6), operational(7)}read-onlycurrent
ibmOsaExpATMLastFailureRespCode
OBJECT-TYPE
Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame contains a non-zero code, or fails to arrive within a timeout period. If none of this client's requests have failed, this object has the value 'none'. If the failed response contained a STATUS code that is not defined in the LAN Emulation specification, this object has the value 'undefinedError'. The value 'timeout' is self explanatory. Other failure codes correspond to those defined in the specification, although they may have different numeric values.
1.3.6.1.4.1.2.6.188.1.7.1.43INTEGER {none(1), timeout(2), undefinedError(3), versionNotSupported(4), invalidRequestParameters(5), duplicateLanDestination(6), duplicateAtmAddress(7), insufficientResources(8), accessDenied(9), invalidRequesterId(10), invalidLanDestination(11), invalidAtmAddress(12), noConfiguration(13), leConfigureError(14), insufficientInformation(15)}read-onlycurrent
ibmOsaExpATMLastFailureState
OBJECT-TYPE
The state this client was in when it updated the 'ibmOsaExpATMLastFailureRespCode'. If 'ibmOsaExpATMLastFailureRespCode' is 'none', this object has the value initialState(1).
1.3.6.1.4.1.2.6.188.1.7.1.44INTEGER {initialState(1), lecsConnect(2), configure(3), join(4), initialRegistration(5), busConnect(6), operational(7)}read-onlycurrent
ibmOsaExpATMProtocol
OBJECT-TYPE
The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs.
1.3.6.1.4.1.2.6.188.1.7.1.45Integer32 (1..255)read-onlycurrent
ibmOsaExpATMLeVersion
OBJECT-TYPE
The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs.
1.3.6.1.4.1.2.6.188.1.7.1.46Integer32 (1..255)read-onlycurrent
ibmOsaExpATMTopologyChange
OBJECT-TYPE
Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, to age non-local entries in its LE_ARP cache C16. For a client which is not connected to the LES, this object is defined to have the value 'false'. Corresponds to Initial State Parameter C19.
1.3.6.1.4.1.2.6.188.1.7.1.47INTEGER {true(1), false(2)}read-onlycurrent
ibmOsaExpATMConfigServerATMAddr
OBJECT-TYPE
The ATM address of the LAN Emulation Configuration Server (if known) or 0 (otherwise). In LAN Emulation MIB, the OCTET STRING is either 0 length or 20 octets. For OSA-ATM, this Address has been changed to a constant 20 octets, with the value 0 equivalent to the 0 length OCTET STRING.
1.3.6.1.4.1.2.6.188.1.7.1.48OCTET STRING (SIZE(20))read-onlycurrent
ibmOsaExpATMConfigSource
OBJECT-TYPE
Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to establish the Configuration Direct VCC
1.3.6.1.4.1.2.6.188.1.7.1.49INTEGER {gotAddressViaIlmi(1), usedWellKnownAddress(2), usedLecsPvc(3), didNotUseLecs(4)}read-onlycurrent
ibmOsaExpATMProxyClient
OBJECT-TYPE
Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receive copies of LE_ARP_REQUEST frames for such addresses. Corresponds to Initial State Parameter C4.
1.3.6.1.4.1.2.6.188.1.7.1.50INTEGER {true(1), false(2)}read-onlycurrent
ibmOsaExpATMLePDUOctetsInbound
OBJECT-TYPE
The number of Le PDU Octets received
1.3.6.1.4.1.2.6.188.1.7.1.51Counter64read-onlycurrent
ibmOsaExpATMNonErrLePDUDiscIn
OBJECT-TYPE
The number of Non Error Le PDU Octets received
1.3.6.1.4.1.2.6.188.1.7.1.52Counter32read-onlycurrent
ibmOsaExpATMErrLePDUDiscIn
OBJECT-TYPE
The number of Errored Le PDU Discards received
1.3.6.1.4.1.2.6.188.1.7.1.53Counter32read-onlycurrent
ibmOsaExpATMLePDUOctetsOutbound
OBJECT-TYPE
The number of Le PDU Discards sent
1.3.6.1.4.1.2.6.188.1.7.1.54Counter64read-onlycurrent
ibmOsaExpATMNonErrLePDUDiscOut
OBJECT-TYPE
The number of Non Error Le PDU Discards sent
1.3.6.1.4.1.2.6.188.1.7.1.55Counter32read-onlycurrent
ibmOsaExpATMErrLePDUDiscOut
OBJECT-TYPE
The number of Errored Le PDU Discards sent
1.3.6.1.4.1.2.6.188.1.7.1.56Counter32read-onlycurrent
ibmOsaExpATMLeARPRequestsOut
OBJECT-TYPE
The number of LE ARP Requests sent
1.3.6.1.4.1.2.6.188.1.7.1.57Counter32read-onlycurrent
ibmOsaExpATMLeARPRequestsIn
OBJECT-TYPE
The number of LE ARP Requests received over the LUNI by this LAN Emulation Client. Requests may arrive on the Control Direct VCC or on the Control Distribute VCC, depending upon how the LES is implemented and the chances it has had for learning. This counter covers both VCCs.
1.3.6.1.4.1.2.6.188.1.7.1.58Counter32read-onlycurrent
ibmOsaExpATMLeARPRepliesOut
OBJECT-TYPE
The number of LE ARP Responses sent over the LUNI by this LAN Emulation Client.
1.3.6.1.4.1.2.6.188.1.7.1.59Counter32read-onlycurrent
ibmOsaExpATMLeARPRepliesIn
OBJECT-TYPE
The number of LE ARP Responses received over the LUNI by this LAN Emulation Client. This count includes all such replies, whether solicited or not. Replies may arrive on the Control Direct VCC or on the Control Distribute VCC, depending upon how the LES is implemented. This counter covers both VCCs.
1.3.6.1.4.1.2.6.188.1.7.1.60Counter32read-onlycurrent
ibmOsaExpATMControlFramesOut
OBJECT-TYPE
The total number of control packets sent by this LAN Emulation Client over the LUNI.
1.3.6.1.4.1.2.6.188.1.7.1.61Counter32read-onlycurrent
ibmOsaExpATMControlFramesIn
OBJECT-TYPE
The total number of control packets received by this LAN Emulation Client over the LUNI.
1.3.6.1.4.1.2.6.188.1.7.1.62Counter32read-onlycurrent
ibmOsaExpATMSVCFailures
OBJECT-TYPE
The total number of outgoing LAN Emulation SVCs which this client tried, but failed, to open; incoming LAN Emulation SVCs which this client tried, but failed to establish; and incoming LAN Emulation SVCs which this client rejected for protocol or security reasons.
1.3.6.1.4.1.2.6.188.1.7.1.63Counter32read-onlycurrent
ibmOsaExpATMConfigDirectIntfc
OBJECT-TYPE
The interface associated with the Configuration Direct VCC. If no Configuration Direct VCC exists, this object has the value 0. Otherwise, the objects ( ibmOsaExpATMConfigDirectIntfc, ibmOsaExpATMConfigDirectVPI, ibmOsaExpATMConfigDirectVCI) identify the circuit.
1.3.6.1.4.1.2.6.188.1.7.1.64Integer32 (0..2147483647)read-onlycurrent
ibmOsaExpATMConfigDirectVPI
OBJECT-TYPE
If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.65Integer32 (0..255)read-onlycurrent
ibmOsaExpATMConfigDirectVCI
OBJECT-TYPE
If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.66Integer32 (0..65535)read-onlycurrent
ibmOsaExpATMControlDirectIntfc
OBJECT-TYPE
The interface associated with the Control Direct VCC. If no Control Direct VCC exists, this object has the value 0. Otherwise, the objects ( ibmOsaExpATMConfigDirectIntfc, ibmOsaExpATMConfigDirectVPI, ibmOsaExpATMConfigDirectVCI) identify the circuit.
1.3.6.1.4.1.2.6.188.1.7.1.67Integer32 (0..2147483647)read-onlycurrent
ibmOsaExpATMControlDirectVPI
OBJECT-TYPE
If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.68Integer32 (0..255)read-onlycurrent
ibmOsaExpATMControlDirectVCI
OBJECT-TYPE
If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.69Integer32 (0..65535)read-onlycurrent
ibmOsaExpATMControlDistIntfc
OBJECT-TYPE
The interface associated with the Control Distribute VCC. If no Control Distribute VCC has been set up to this client, this object has the value 0. Otherwise, the objects ( ibmOsaExpATMControlDistIntfc, ibmOsaExpATMControlDistributeVPI. ibmOsaExpATMControlDistributeVCI) identify the circuit.
1.3.6.1.4.1.2.6.188.1.7.1.70Integer32 (0..2147483647)read-onlycurrent
ibmOsaExpATMControlDistributeVPI
OBJECT-TYPE
If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.71Integer32 (0..255)read-onlycurrent
ibmOsaExpATMControlDistributeVCI
OBJECT-TYPE
If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object contains the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.72Integer32 (0..65535)read-onlycurrent
ibmOsaExpATMMulticastSendIntfc
OBJECT-TYPE
The interface associated with the Multicast Send VCC. If no Multicast Send VCC exists, this object has the value 0. Otherwise, the objects ( ibmOsaExpATMMulticastSendIntfc, ibmOsaExpATMMulticastSendVPI, ibmOsaExpATMMulticastSendVCI) identify the circuit.
1.3.6.1.4.1.2.6.188.1.7.1.73Integer32 (0..2147483647)read-onlycurrent
ibmOsaExpATMMulticastSendVPI
OBJECT-TYPE
If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.74Integer32 (0..255)read-onlycurrent
ibmOsaExpATMMulticastSendVCI
OBJECT-TYPE
If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.75Integer32 (0..65535)read-onlycurrent
ibmOsaExpATMMulticastFwdIntfc
OBJECT-TYPE
The interface associated with the Multicast Forward VCC. If no Multicast Forward VCC has been set up to this client, this object has the value 0. Otherwise, the objects ( ibmOsaExpATMMulticastFwdIntfc, ibmOsaExpATMMulticastForwardVPI, ibmOsaExpATMMulticastForwardVCI) identify the circuit.
1.3.6.1.4.1.2.6.188.1.7.1.76Integer32 (0..2147483647)read-onlycurrent
ibmOsaExpATMMulticastForwardVPI
OBJECT-TYPE
If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.77Integer32 (0..255)read-onlycurrent
ibmOsaExpATMMulticastForwardVCI
OBJECT-TYPE
If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
1.3.6.1.4.1.2.6.188.1.7.1.78Integer32 (0..65535)read-onlycurrent
ibmOSAMibConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.188.2
ibmOSAMibCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.188.2.1
ibmOSAMibGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.188.2.2

Conformance

NameOIDStatus
ibmOSAMibCompliance
MODULE-COMPLIANCE
The compliance statement for the OSA DIrect SNMP product.
1.3.6.1.4.1.2.6.188.2.1.1current
ibmOSAExpChannelGroup
OBJECT-GROUP
This group comprises those objects that are related to OSA-Express Channel support.
1.3.6.1.4.1.2.6.188.2.2.1current
ibmOSAExpPerfGroup
OBJECT-GROUP
This group comprises those objects that are related to OSA-Express Performance data support.
1.3.6.1.4.1.2.6.188.2.2.2current
ibmOSAExpPEGroup
OBJECT-GROUP
This group comprises those objects that are related to OSA-Express PE data support.
1.3.6.1.4.1.2.6.188.2.2.3current
ibmOSAExpEthGroup
OBJECT-GROUP
This group comprises those objects that are related to OSA-Express Fast Ethernet and Gigabit features only
1.3.6.1.4.1.2.6.188.2.2.4current
ibmOSAExpTRGroup
OBJECT-GROUP
This group comprises those objects that are related to OSA-Express Token Ring feature only
1.3.6.1.4.1.2.6.188.2.2.5current
ibmOSAExpATMGroup
OBJECT-GROUP
This group comprises those objects that are related to OSA-Express ATM LAN Emulation feature only
1.3.6.1.4.1.2.6.188.2.2.7current