IBM-ENETDISPATCHER-MIB
- Registered at
- 1.3.6.1.4.1.2.6.144.1
- Namespace
- ibm
- Source file
IBM-ENETDISPATCHER-MIB- Digest
sha256:c3a4a1f445b0a16494d1292e7d0851d166545672803468756267366cc251637f
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso |
| SNMPv2-SMI-v1 | Counter32, Gauge32, Integer32, IpAddress, enterprises |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
| SNMPv2-TC-v1 | DisplayString, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IBM-ENETDISPATCHER-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-SMI-v1 SNMPv2-TC SNMPv2-TC-v1
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| GaugeNeg1 type | ||||
| Percentages type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dispatcherMib OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1 | |||
| dispatcherMibTraps OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.0 | |||
| dispatcherMibAdmin OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.1 | |||
| dispatcherMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2 | |||
| indStatus OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.1 | |||
| indExecStatObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.1.1 | |||
| esNonForAddr OBJECT-TYPE Non forwarding address, any packet sent to this address will be handled by the Network Dispatcher machine itself and will not be forwarded | 1.3.6.1.4.1.2.6.144.1.2.1.1.1 | IpAddress | read-only | mandatory |
| esVersion OBJECT-TYPE The version of the executor | 1.3.6.1.4.1.2.6.144.1.2.1.1.2 | DisplayString | read-only | mandatory |
| esNumClust OBJECT-TYPE Current number of clusters | 1.3.6.1.4.1.2.6.144.1.2.1.1.3 | Gauge32 | read-only | mandatory |
| esTotalPkts OBJECT-TYPE Total number of packets received by the executor since it started. | 1.3.6.1.4.1.2.6.144.1.2.1.1.4 | Counter32 | read-only | mandatory |
| esTooShortPkts OBJECT-TYPE Total number of packets discarded by the executor, since the executor started, because the packet headers were too short. | 1.3.6.1.4.1.2.6.144.1.2.1.1.5 | Counter32 | read-only | mandatory |
| esNonForPkts OBJECT-TYPE Total number of packets sent to the non forwarding address since the executor started. | 1.3.6.1.4.1.2.6.144.1.2.1.1.6 | Counter32 | read-only | mandatory |
| esClstrDscrdPkts OBJECT-TYPE Total number of packets discarded by the executor since the executor started, which were forwarded to a cluster, but were discarded because either: -the port did not exist, or -the port existed but had no servers | 1.3.6.1.4.1.2.6.144.1.2.1.1.7 | Counter32 | read-only | mandatory |
| esClstrErrPkts OBJECT-TYPE Total number of packets not sent, since the executor started, because of a network adapter failure | 1.3.6.1.4.1.2.6.144.1.2.1.1.8 | Counter32 | read-only | mandatory |
| esClstrLocalPkts OBJECT-TYPE Total number of packets since the executor started, not for the non forwarding address, or any cluster, but to be processed locally, by the Network Dispatcher machine | 1.3.6.1.4.1.2.6.144.1.2.1.1.9 | Counter32 | read-only | mandatory |
| esClstrOwnAddrPkts OBJECT-TYPE Total number of packets since the executor started, explicitly forwarded to a server located on the Network Dispatcher machine | 1.3.6.1.4.1.2.6.144.1.2.1.1.10 | Counter32 | read-only | mandatory |
| esClstrForPkts OBJECT-TYPE Total number of packets since the executor started, forwarded to any cluster | 1.3.6.1.4.1.2.6.144.1.2.1.1.11 | Counter32 | read-only | mandatory |
| esForErrPkts OBJECT-TYPE Total number of packets with forwarding errors since the executor started. The following are the scenarios which affect this counter: -There was an error extracting an encapsulated packet which came in from a wide area Network Dispatcher -An attempt to forward the packet to either a local or remote server failed. | 1.3.6.1.4.1.2.6.144.1.2.1.1.12 | Counter32 | read-only | mandatory |
| esNotClstrPkts OBJECT-TYPE Total number of packets not addressed to any active cluster and port, since the executor started | 1.3.6.1.4.1.2.6.144.1.2.1.1.13 | Counter32 | read-only | mandatory |
| esHashBkts OBJECT-TYPE Current number of occupied hash buckets. Hash buckets correspond to IP address/port pairs. If this number is very low, it may indicate that the servers are getting many hits from a small number of clients. This number gives an indication of the client pool diversity. | 1.3.6.1.4.1.2.6.144.1.2.1.1.14 | Gauge32 | read-only | mandatory |
| esStartTime OBJECT-TYPE The time when the executor was started, in seconds from January 1, 1970 | 1.3.6.1.4.1.2.6.144.1.2.1.1.15 | Counter32 | read-only | mandatory |
| indClstrStatTable OBJECT-TYPE A list of cluster table entries. The number of entries should equal the current number of clusters, esNumClust. The cluster table has a row for each cluster, Each row has information about the current status of that cluster. | 1.3.6.1.4.1.2.6.144.1.2.1.2 | not-accessible | mandatory | |
| indClstrStatEntry OBJECT-TYPE A cluster table entry describing current status of the cluster. The cluster table has a row for each cluster. Rows in this table can not be created or deleted via SNMP commands | 1.3.6.1.4.1.2.6.144.1.2.1.2.1 | not-accessible | mandatory | |
| csAddr OBJECT-TYPE The cluster address in dotted decimal format | 1.3.6.1.4.1.2.6.144.1.2.1.2.1.1 | IpAddress | not-accessible | mandatory |
| csNumPorts OBJECT-TYPE The current number of ports for this cluster | 1.3.6.1.4.1.2.6.144.1.2.1.2.1.2 | Gauge32 | read-only | mandatory |
| csActiveSYNs OBJECT-TYPE TH_SYNs on active connection. This variable indicates the number of requests for new connections, where those new connections are the same as current active connections, those not in FIN state. A high rate of growth in this variable could indicate slow or no response from servers in this cluster. | 1.3.6.1.4.1.2.6.144.1.2.1.2.1.3 | Counter32 | read-only | mandatory |
| csDroppedFINs OBJECT-TYPE FINs dropped due to no connection. Rapid increase in this variable could indicate that the staletimeout is too low. Any percentage greater than 1% of total packets forwarded could indicate a problem. | 1.3.6.1.4.1.2.6.144.1.2.1.2.1.4 | Counter32 | read-only | mandatory |
| csDroppedACKs OBJECT-TYPE ACKSs dropped due to no connection. Rapid increase in this variable could indicate that the staletimeout is too low. Any percentage greater than 1% of total packets forwarded could indicate a problem. | 1.3.6.1.4.1.2.6.144.1.2.1.2.1.5 | Counter32 | read-only | mandatory |
| csDroppedRSTs OBJECT-TYPE RSTs dropped due to no connection. Rapid increase in this variable could indicate that the staletimeout is too low. Any percentage greater than 1% of total packets forwarded could indicate a problem. | 1.3.6.1.4.1.2.6.144.1.2.1.2.1.6 | Counter32 | read-only | mandatory |
| csDroppedPKTs OBJECT-TYPE PKTSs dropped due to no connection. Rapid increase in this variable could indicate that the staletimeout is too low. Any percentage greater than 1% of total packets forwarded could indicate a problem. | 1.3.6.1.4.1.2.6.144.1.2.1.2.1.7 | Counter32 | read-only | mandatory |
| csNonExistingPKTs OBJECT-TYPE This variable has no meaning and is deprecated | 1.3.6.1.4.1.2.6.144.1.2.1.2.1.8 | Counter32 | read-only | deprecated |
| indPortStatTable OBJECT-TYPE A list of port table entries. The number of entries equals the sum of the number of ports for each cluster. Each row in the table provides current status information for a port. | 1.3.6.1.4.1.2.6.144.1.2.1.3 | not-accessible | mandatory | |
| indPortStatEntry OBJECT-TYPE A port entry describing current status of the port. The port table has an entry for each cluster, port combination. Rows in this table can not be created or deleted via SNMP commands | 1.3.6.1.4.1.2.6.144.1.2.1.3.1 | not-accessible | mandatory | |
| psNum OBJECT-TYPE Number of this port | 1.3.6.1.4.1.2.6.144.1.2.1.3.1.1 | Integer32 (0..65535) | not-accessible | mandatory |
| psNumServers OBJECT-TYPE Current number of servers on this port | 1.3.6.1.4.1.2.6.144.1.2.1.3.1.2 | Gauge32 | read-only | mandatory |
| psNumNodesDown OBJECT-TYPE Number of down servers | 1.3.6.1.4.1.2.6.144.1.2.1.3.1.3 | Gauge32 | read-only | mandatory |
| indSrvrStatTable OBJECT-TYPE A list of server table entries. The number of entries equals the sum of the number of servers for each port. Each server table entry provides current status information about the port. | 1.3.6.1.4.1.2.6.144.1.2.1.4 | not-accessible | mandatory | |
| indSrvrStatEntry OBJECT-TYPE A server entry describing current status of the server. There is a row in the server table for each cluster, port, server combination. Rows in this table can not be created or deleted via SNMP commands | 1.3.6.1.4.1.2.6.144.1.2.1.4.1 | not-accessible | mandatory | |
| ssAddr OBJECT-TYPE Server address in dotted decimal notation | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.1 | IpAddress | not-accessible | mandatory |
| ssActiveConns OBJECT-TYPE Current active connections for this server | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.2 | Gauge32 | read-only | mandatory |
| ssNewConns OBJECT-TYPE Change in the number of total connections over the last interval. | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.3 | Gauge32 | read-only | mandatory |
| ssTotalConns OBJECT-TYPE Total connections for this server, since the server was added to the currently running executor | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.4 | Counter32 | read-only | mandatory |
| ssTotalTcpConns OBJECT-TYPE Total TCP connections for this server, since the server was added to the currently running executor. ssTotalTcpConns plus ssTotalUdpConns equals ssTotalConns. | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.5 | Counter32 | read-only | mandatory |
| ssTotalUdpConns OBJECT-TYPE Total UDP connections for this server, since the server was added to the currently running executor. ssTotalTcpConns plus ssTotalUdpConns equals ssTotalConns. | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.6 | Counter32 | read-only | mandatory |
| ssFinConns OBJECT-TYPE Current number of connections in FIN state | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.7 | Gauge32 | read-only | mandatory |
| ssCompleteConns OBJECT-TYPE Total number of completed connections for this server, since the server was added to the currently running executor. | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.8 | Counter32 | read-only | mandatory |
| ssWeight OBJECT-TYPE Current weight for this server. When the weight is zero the executor will no longer forward packets to this server. A weight of -1 indicates that the Network Dispatcher administrator has explicitly marked the server down. | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.9 | GaugeNeg1 | read-only | mandatory |
| ssSavedWeight OBJECT-TYPE Weight the server had when marked down. This weight will be restored when the server is marked up. | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.10 | GaugeNeg1 | read-only | mandatory |
| ssPortLoad OBJECT-TYPE Number of milliseconds an advisor took to complete a protocol specific request to the server. If the value is -1, the advisor could not complete the request to the server. | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.11 | GaugeNeg1 | read-only | mandatory |
| ssSystemLoad OBJECT-TYPE This value is the number that the ISS agent provides to the ISS monitor for this server. The variable is only valid if ISS is monitoring an ISS agent on this server. Otherwise, the value has no meaning. | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.12 | Integer32 | read-only | mandatory |
| ssActiveConnsWeight OBJECT-TYPE The weight calculated by the manager for the active connections measurement | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.13 | Integer32 | read-only | mandatory |
| ssNewConnsWeight OBJECT-TYPE The weight calculated by the manager for the new connections measurement | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.14 | Integer32 | read-only | mandatory |
| ssPortLoadWeight OBJECT-TYPE The weight calculated by the manager for the port load measurement | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.15 | Integer32 | read-only | mandatory |
| ssSystemLoadWeight OBJECT-TYPE The weight calculated by the manager for the system load measurement | 1.3.6.1.4.1.2.6.144.1.2.1.4.1.16 | Integer32 | read-only | mandatory |
| indRulesStatTable OBJECT-TYPE A list of rule table entries. There is no limit on the number of rules. The number of entries is the same as the number of entries in the indRulesCnfgTable. Each status entry provides current status information about the rule. | 1.3.6.1.4.1.2.6.144.1.2.1.5 | not-accessible | mandatory | |
| indRulesStatEntry OBJECT-TYPE A rule table entry describing the current status of a rule. There is a one to one correspondence between rows of this table and rows in the IndRulesCnfgTable. Rows in this table can not be created or deleted via SNMP commands | 1.3.6.1.4.1.2.6.144.1.2.1.5.1 | not-accessible | mandatory | |
| rsTimesFired OBJECT-TYPE The total number of times this rule has fired | 1.3.6.1.4.1.2.6.144.1.2.1.5.1.2 | Counter32 | read-only | mandatory |
| rsNumSrvrs OBJECT-TYPE The number of servers which this rule services. | 1.3.6.1.4.1.2.6.144.1.2.1.5.1.3 | Gauge32 | read-only | mandatory |
| indHiAvailStatObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.1.6 | |||
| hasPrimary OBJECT-TYPE Indicates whether this machine is the primary or backup machine. -primary (0) -backup (1) | 1.3.6.1.4.1.2.6.144.1.2.1.6.1 | INTEGER {primary(0), backup(1)} | read-only | mandatory |
| hasPort OBJECT-TYPE Port used by both primary and backup Network Dispatcher machines for heartbeat messages. | 1.3.6.1.4.1.2.6.144.1.2.1.6.2 | Integer32 (0..2147483647) | read-only | mandatory |
| hasState OBJECT-TYPE Status of this Network Dispatcher machine. -idle, (0) this machine is routing packets and is not trying to establish contact with its partner Network Dispatcher -listen, (1) high availability has just started and network dispatcher is listening for partner, -active, (2) this machine is routing packets. -standby,(3) this machine is monitoring the active machine. -preempt,(4) transitory state during switch from primary to backup -elect, (5) network dispatcher is negotiating with partner for who will primary or backup -no_exec,(6) the executor is not running | 1.3.6.1.4.1.2.6.144.1.2.1.6.3 | INTEGER {idle(0), listen(1), active(2), standby(3), preempt(4), elect(5), noExec(6)} | read-only | mandatory |
| hasSubState OBJECT-TYPE High Availability sub state: Synchronized and notSynchronized are normal, synchIn and synchOut are transitory. If the Network Dispatcher machine appears to be stuck (for more than a minute), in a transitory state then that indicates a problem. If HighAvailability should be running and the substate is notSynchronized, then that indicates a problem. If High Availability is not running and the hasState is idle, then all subState data is meaningless and should be ignored. notSynchronized (0), network dispatcher is not in conact with partner machine synchronized (1), network dispatcher is in contact with partner machine sync-in (2), network dispatcher is going into standby state sync-out (3), network dispatcher is going into active state | 1.3.6.1.4.1.2.6.144.1.2.1.6.4 | INTEGER {notSynchronized(0), synchronized(1), syncIn(2), syncOut(3)} | read-only | mandatory |
| indReachStatTable OBJECT-TYPE A list of reach table entries. The number of entries is typically less than 10, with a maximum of 32. | 1.3.6.1.4.1.2.6.144.1.2.1.7 | not-accessible | mandatory | |
| indReachStatEntry OBJECT-TYPE A reach table entry includes the address being pinged, and whether the ping of that address was successful. Rows in this table can not be created or deleted via SNMP commands | 1.3.6.1.4.1.2.6.144.1.2.1.7.1 | not-accessible | mandatory | |
| rsAddr OBJECT-TYPE The address the reach advisor pings. | 1.3.6.1.4.1.2.6.144.1.2.1.7.1.1 | IpAddress | not-accessible | mandatory |
| rsPingAble OBJECT-TYPE Whether this reach address (rsAddr) responded to a ping. unknown (0), the rsAddr is unknown, possibly because the reach advisor is not started. reachable (1), the rsAddr was pinged successfully unreachable (2) the rsAddr was not pinged successfully | 1.3.6.1.4.1.2.6.144.1.2.1.7.1.2 | INTEGER {unknown(0), reachable(1), unreachable(2)} | read-only | mandatory |
| indConfig OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.2 | |||
| indExecCnfgObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.2.1 | |||
| indClstrCnfgTable OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.2.2 | |||
| indPortCnfgTable OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.2.3 | |||
| indSrvrCnfgTable OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.2.4 | |||
| indRulesCnfgTable OBJECT-TYPE A list of rule config table entries There is no limit to the number of rule entries. Each rule table row describes rule configuration information. | 1.3.6.1.4.1.2.6.144.1.2.2.5 | not-accessible | mandatory | |
| indRulesCnfgEntry OBJECT-TYPE A rule config table entry has information about the current configuration of the rule. Rows in this table can not be created or destroyed via SNMP commands. | 1.3.6.1.4.1.2.6.144.1.2.2.5.1 | not-accessible | mandatory | |
| rcIndex OBJECT-TYPE A unique number assigned to each rule in a cluster, port combination | 1.3.6.1.4.1.2.6.144.1.2.2.5.1.1 | Integer32 (0..2147483647) | not-accessible | mandatory |
| rcName OBJECT-TYPE The user defined name of the rule. Rule names are not necessarily unique. | 1.3.6.1.4.1.2.6.144.1.2.2.5.1.2 | DisplayString | read-write | mandatory |
| rcType OBJECT-TYPE The type of rule true (0), rules of this type are always true ip (1), the rule is based on the client IP address port (2), the rule is based on the client port time (3), the rule is based on the time of day connection (4), the rule is based on the number of connections per second for the port active (5) the rule is based on the number total active connections for the port | 1.3.6.1.4.1.2.6.144.1.2.2.5.1.3 | INTEGER {true(0), ip(1), port(2), time(3), connection(4), active(5)} | read-write | mandatory |
| rcBeginRange OBJECT-TYPE The lower value in the range used to determine if the rule is true or not. The data is meaningless for rule type 0. | 1.3.6.1.4.1.2.6.144.1.2.2.5.1.4 | Integer32 | read-write | mandatory |
| rcEndRange OBJECT-TYPE The higher value in the range used to determine if the rule is true or not. The data is meaningless for rule type 0. | 1.3.6.1.4.1.2.6.144.1.2.2.5.1.5 | Integer32 | read-write | mandatory |
| rcPriority OBJECT-TYPE The rule priority. Lower numbers are a higher priority. Rule priority determines the order in which rules are evaluated. | 1.3.6.1.4.1.2.6.144.1.2.2.5.1.6 | Integer32 | read-write | mandatory |
| rcSrvrList OBJECT-TYPE The list of servers this rule services. The server addresses are represented as strings in dotted decimal notation, separated by plus signs. For example, 37.44.24.13+12.23.54.76+9.67.127.82 | 1.3.6.1.4.1.2.6.144.1.2.2.5.1.7 | DisplayString | read-write | mandatory |
| indHiAvailCnfgObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.2.6 | |||
| indReachCnfgTable OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.2.7 | |||
| indHrtBeatCnfgTable OBJECT-TYPE A list of heartBeat Table entries. The number of entries is usually less than the number of interface cards in the Network Dispatcher machine. The maximum is 32. The heart beat table lists each of the monitoring and responding heartbeat pairs. | 1.3.6.1.4.1.2.6.144.1.2.2.8 | not-accessible | mandatory | |
| indHrtBeatCnfgEntry OBJECT-TYPE A indHrtBeatCnfg entry describing the monitoring and responding addresses. Each heart beat source address and heart beat destination address pair is unique. Rows in this table can not be created or deleted via SNMP commands | 1.3.6.1.4.1.2.6.144.1.2.2.8.1 | not-accessible | mandatory | |
| hbcSrcAddr OBJECT-TYPE Address from which Network Dispatcher machine issues heartbeat monitoring to its partner | 1.3.6.1.4.1.2.6.144.1.2.2.8.1.1 | IpAddress | not-accessible | mandatory |
| hbcDestAddr OBJECT-TYPE Address of Network Dispatcher machine who's status is being monitored. | 1.3.6.1.4.1.2.6.144.1.2.2.8.1.2 | IpAddress | not-accessible | mandatory |
| hbcNumber OBJECT-TYPE An integer number assigned to the heart beat pair. | 1.3.6.1.4.1.2.6.144.1.2.2.8.1.3 | Integer32 (0..2147483647) | read-only | mandatory |
| indAdvsrCnfgTable OBJECT-TYPE A list of advisor config table entries. The number of entries equals the number of ports times the number of advisors. Each advisor table row describes the current status of the advisor, port combination. | 1.3.6.1.4.1.2.6.144.1.2.2.9 | not-accessible | mandatory | |
| indAdvsrCnfgEntry OBJECT-TYPE An advisor entry describing current configuration of the Advisor. There is an advisor table entry for each advisor, port combination. Rows in this table can not be created or deleted via SNMP commands | 1.3.6.1.4.1.2.6.144.1.2.2.9.1 | not-accessible | mandatory | |
| acPort OBJECT-TYPE Number of the port that the advisor is monitoring | 1.3.6.1.4.1.2.6.144.1.2.2.9.1.1 | Integer32 (0..2147483647) | not-accessible | mandatory |
| acName OBJECT-TYPE Name of the advisor. Some of the possible values are: FTP, HTTP, NNTP, POP3, SMTP, SSL, Telnet. and custom advisor names. | 1.3.6.1.4.1.2.6.144.1.2.2.9.1.2 | DisplayString | read-only | mandatory |
| acVersion OBJECT-TYPE Current version of the advisor | 1.3.6.1.4.1.2.6.144.1.2.2.9.1.3 | DisplayString | read-only | mandatory |
| indMngrCnfgObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.2.2.10 | |||
| mcInterval OBJECT-TYPE How often the manager will update server weights, in seconds. | 1.3.6.1.4.1.2.6.144.1.2.2.10.1 | Integer32 (0..2147483647) | read-write | mandatory |
| mcRefresh OBJECT-TYPE Number of manager intervals (mcInterval) before querying the executor for a refresh of information about new and active connections | 1.3.6.1.4.1.2.6.144.1.2.2.10.2 | Integer32 (0..2147483647) | read-write | mandatory |
| mcActiveProp OBJECT-TYPE Number from 0 to 100 representing the relative importance of active connections. This number is used by the manager, in calculating server weights. The sum of mcActiveProp, mcNewProp, mcPortProp, and mcSystemProp, must be 100 | 1.3.6.1.4.1.2.6.144.1.2.2.10.3 | Percentages | read-write | mandatory |
| mcNewProp OBJECT-TYPE Number from 0 to 100 representing the relative importance of new connections. This number is used by the manager, in calculating server weights. The sum of mcActiveProp, mcNewProp, mcPortProp, and mcSystemProp, must be 100 | 1.3.6.1.4.1.2.6.144.1.2.2.10.4 | Percentages | read-write | mandatory |
| mcPortProp OBJECT-TYPE Number from 0 to 100 representing the relative importance of port advisor information. This number is used by the manager, in calculating server weights. The sum of mcActiveProp, mcNewProp, mcPortProp, and mcSystemProp, must be 100 | 1.3.6.1.4.1.2.6.144.1.2.2.10.5 | Percentages | read-write | mandatory |
| mcSystemProp OBJECT-TYPE Number from 0 to 100 representing the relative importance of the information from system metrics, such as ISS. This number is used by the manager, in calculating server weights. The sum of mcActiveProp, mcNewProp, mcPortProp, and mcSystemProp, must be 100 | 1.3.6.1.4.1.2.6.144.1.2.2.10.6 | Percentages | read-write | mandatory |
| mcSensitivity OBJECT-TYPE Minimum sensitivity to weight updates. This setting defines when the manager should change its weighting for the server based on external information | 1.3.6.1.4.1.2.6.144.1.2.2.10.7 | Percentages | read-write | mandatory |
| mcSmoothing OBJECT-TYPE Index that smoothes the variations in weight when load balancing. Smoothing can reduce the changes in weights from interval to interval. The higher the smoothing value the less the weight will change from interval to interval. 1.5 is a typical value. 4, for example, is a high smoothhing value and would reduce the change in weight from interval to interval to almost nothing. The value is a percentage. For example a value of 155 should be treated as 1.55 by managing applications. | 1.3.6.1.4.1.2.6.144.1.2.2.10.8 | Percentages | read-write | mandatory |
| mcVersion OBJECT-TYPE The version of the manager | 1.3.6.1.4.1.2.6.144.1.2.2.10.9 | DisplayString | read-only | mandatory |
| indAllSrvrsCnfgTable OBJECT-TYPE A list of all servers table entries. The number of entries equals the number of different servers configured. | 1.3.6.1.4.1.2.6.144.1.2.2.11 | not-accessible | mandatory | |
| indAllSrvrsCnfgEntry OBJECT-TYPE An all servers table entry describing operational aspects of servers. This table is a list of all the servers currently configured in Network Dispatcher. Rows in this table can not be created or deleted via SNMP | 1.3.6.1.4.1.2.6.144.1.2.2.11.1 | not-accessible | mandatory | |
| ascAddr OBJECT-TYPE The IP Address of the server in dotted decimal format | 1.3.6.1.4.1.2.6.144.1.2.2.11.1.1 | IpAddress | not-accessible | mandatory |
| ascQuiesced OBJECT-TYPE True if this server has been quiesced, false otherwise. When a server is quiesced, no more connections are sent to the server. A server can be quiesced via the ndcontrol manager quiesce command. True=1, False=2. | 1.3.6.1.4.1.2.6.144.1.2.2.11.1.2 | TruthValue | read-write | mandatory |
| ascInstances OBJECT-TYPE The current number of times this server, ascAddr, is in the configuration. | 1.3.6.1.4.1.2.6.144.1.2.2.11.1.3 | Gauge32 | read-write | mandatory |
| dispatcherMibConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3 | |||
| indMibCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.1 | |||
| indMibCompliance OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.1.1 | |||
| indMibGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2 | |||
| indMibStatGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.1 | |||
| indMibExecStatGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.1.1 | |||
| indMibClstrStatGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.1.2 | |||
| indMibPortStatGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.1.3 | |||
| indMibSrvrStatGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.1.4 | |||
| indMibRulesStatGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.1.5 | |||
| indMibHiAvailStatGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.1.6 | |||
| indMibReachStatGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.1.7 | |||
| indMibCnfgGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.2 | |||
| indMibRulesCnfgGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.2.5 | |||
| indMibHrtBeatCnfgGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.2.8 | |||
| indMibAdvsrCnfgGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.2.9 | |||
| indMibMngrCnfgGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.2.10 | |||
| indMibAllSrvrsCnfgGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2.6.144.1.3.2.2.11 |
Notifications
| Name | OID | Status |
|---|---|---|
| indHighAvailStatus NOTIFICATION-TYPE This trap announces that the value of the high availability status state (hasState) variable has changed. The possible values of hasState and their respective meanings are: -idle, (0) this machine is routing packets and is not trying to establish contact with its partner Network Dispatcher -listen, (1) high availability has just started and network dispatcher is listening for partner, -active, (2) this machine is routing packets. -standby,(3) this machine is monitoring the active machine. -preempt,(4) transitory state during switch from primary to backup -elect, (5) network dispatcher is negotiating with partner for who will primary or backup -no_exec,(6) the executor is not running | 1.3.6.1.4.1.2.6.144.1.0.1 | |
| indSrvrGoneDown NOTIFICATION-TYPE This trap announces that the weight for the server specified by the csAddr, psNum, ssAddr portion of the Object Identifier has gone to zero, The last known number of active connections for the server is sent in the trap. This trap indicates that, as far as Network Dispatcher can determine, the specified server has gone down. | 1.3.6.1.4.1.2.6.144.1.0.2 |