HYTERA-REPEATER-MIB
- Registered at
- 1.3.6.1.4.1.40297
- Namespace
- hytera
- Source file
HYTERA-REPEATER-MIB- Digest
sha256:9eeac239e70b59d4dee0c3d008eddb4730eb013e56b8c2841e5f9558e6d253fb
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso, private |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HYTERA-REPEATER-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hyteraRepeaterMIB OBJECT-IDENTITY | 1.3.6.1.4.1.40297 | |||
| product OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1 | |||
| repeater OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2 | |||
| rptRealTimeInfo OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.1 | |||
| rptAlarmInfo OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.1.1 | |||
| rptVoltageAlarm OBJECT-TYPE The voltage alarm. normal(0), low voltage alarm(1), high voltage alarm(2), abnormal(3). The abnormal condition is used for RD960. For the RD960 do not distinguish low voltage alarm and high voltage alarm, we use abnormal to replace them. | 1.3.6.1.4.1.40297.1.2.1.1.1 | INTEGER (0..2) | read-only | mandatory |
| rptTemperatureAlarm OBJECT-TYPE The temperature alarm. normal(0), low temperature alarm(1), high temperature alarm(2). | 1.3.6.1.4.1.40297.1.2.1.1.2 | INTEGER (0..2) | read-only | mandatory |
| rptFanAlarm OBJECT-TYPE The fan alarm. normal(0), alarm(1). The object is not supported yet. | 1.3.6.1.4.1.40297.1.2.1.1.3 | INTEGER (0..1) | read-only | optional |
| rptForwardAlarm OBJECT-TYPE The forward power alarm. undefined(-1), normal(0), alarm(1). The object is not supported yet. | 1.3.6.1.4.1.40297.1.2.1.1.4 | INTEGER (-1..1) | read-only | optional |
| rptReflectedAlarm OBJECT-TYPE The reflected power alarm. undefined(-1), normal(0), alarm(1). The object is not supported yet. | 1.3.6.1.4.1.40297.1.2.1.1.5 | INTEGER (-1..1) | read-only | optional |
| rptVswrAlarm OBJECT-TYPE The voltage standing wave radio alarm. normal(0), alarm(1). | 1.3.6.1.4.1.40297.1.2.1.1.6 | INTEGER (0..1) | read-only | mandatory |
| rptTxPllAlarm OBJECT-TYPE The transmitting PLL alarm. normal(0), alarm(1). | 1.3.6.1.4.1.40297.1.2.1.1.7 | INTEGER (0..1) | read-only | mandatory |
| rptRxPllAlarm OBJECT-TYPE The receiving PLL alarm. normal(0), alarm(1). | 1.3.6.1.4.1.40297.1.2.1.1.8 | INTEGER (0..1) | read-only | mandatory |
| rptBatteryVoltageAlarm OBJECT-TYPE The battery voltage alarm. normal(0), abnormal(1). | 1.3.6.1.4.1.40297.1.2.1.1.9 | INTEGER (0..2) | read-only | mandatory |
| rptDataInfo OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.1.2 | |||
| rptVoltage OBJECT-TYPE The voltage. It should be changed to float format. If the repeater is rd620 and rd960, the value is invalid. | 1.3.6.1.4.1.40297.1.2.1.2.1 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| rptPaTemprature OBJECT-TYPE The temperature. It should be changed to float format. The value is invalid, if the repeater is rd960. | 1.3.6.1.4.1.40297.1.2.1.2.2 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| rptFanSpeed OBJECT-TYPE The fan speed. The object is not supported yet. | 1.3.6.1.4.1.40297.1.2.1.2.3 | INTEGER | read-only | optional |
| rptVswr OBJECT-TYPE The VSWR. It should be changed to float format. | 1.3.6.1.4.1.40297.1.2.1.2.4 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| rptTxFwdPower OBJECT-TYPE The forward power. It should be changed to float format. The value is invalid, if the repeater is rd960 or rd620. | 1.3.6.1.4.1.40297.1.2.1.2.5 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| rptTxRefPower OBJECT-TYPE The reflected power. It should be changed to float format. The value is invalid, if the repeater is rd960 or rd620. | 1.3.6.1.4.1.40297.1.2.1.2.6 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| rptDataInfoBak1 OBJECT-TYPE The backup object. The object is not supported yet. | 1.3.6.1.4.1.40297.1.2.1.2.7 | OCTET STRING (SIZE(4)) | read-only | optional |
| rptDataInfoBak2 OBJECT-TYPE The backup object. The object is not supported yet. | 1.3.6.1.4.1.40297.1.2.1.2.8 | OCTET STRING (SIZE(4)) | read-only | optional |
| rptSlot1Rssi OBJECT-TYPE The RSSI value of slot1. unit: dB. | 1.3.6.1.4.1.40297.1.2.1.2.9 | INTEGER | read-only | mandatory |
| rptSlot2Rssi OBJECT-TYPE The RSSI value of slot2. unit: dB. The value is valid only in digital model. | 1.3.6.1.4.1.40297.1.2.1.2.10 | INTEGER | read-only | mandatory |
| rptSupplyPowerType OBJECT-TYPE The type of power. DC(0), Battery(1). | 1.3.6.1.4.1.40297.1.2.1.2.11 | INTEGER | read-only | mandatory |
| rptBatteryConnect OBJECT-TYPE The battery connecting condition. disconnected(0), connected(1). | 1.3.6.1.4.1.40297.1.2.1.2.12 | INTEGER | read-only | mandatory |
| rptBatteryVoltage OBJECT-TYPE The battery voltage. The object is not supported yet. | 1.3.6.1.4.1.40297.1.2.1.2.13 | OCTET STRING (SIZE(4)) | read-only | optional |
| rptControl OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.2 | |||
| rptRestart OBJECT-TYPE Restart the repeater. do nothing(0), reset(1). | 1.3.6.1.4.1.40297.1.2.2.1 | INTEGER (0..1) | read-write | mandatory |
| rptChannelNumber OBJECT-TYPE The current channel number in the zone. | 1.3.6.1.4.1.40297.1.2.2.2 | INTEGER (0..15) | read-write | mandatory |
| rptChannelType OBJECT-TYPE The current channel type. digital(0), analog(1), mixed(2). | 1.3.6.1.4.1.40297.1.2.2.3 | INTEGER (0..2) | read-only | mandatory |
| rptControlObjBak1 OBJECT-TYPE The backup object. The object is not supported yet. | 1.3.6.1.4.1.40297.1.2.2.4 | INTEGER (0..1) | read-only | optional |
| rptTxPowerLevel OBJECT-TYPE The transmit power level. high(0), low(2). | 1.3.6.1.4.1.40297.1.2.2.5 | INTEGER (0 | 2) | read-write | mandatory |
| rptKnockdown OBJECT-TYPE The status of repeating. repeating(0), knockdown(1). | 1.3.6.1.4.1.40297.1.2.2.6 | INTEGER (0..1) | read-write | mandatory |
| rptRadioState OBJECT-TYPE The status of the repeater's normal function. enable(0), disable(1). | 1.3.6.1.4.1.40297.1.2.2.7 | INTEGER (0..1) | read-write | mandatory |
| rptSnmpTrapIp OBJECT-TYPE The SNMP trapping IP address. The default value is 230.37.0.0. | 1.3.6.1.4.1.40297.1.2.2.8 | IpAddress | read-write | mandatory |
| rptSnmpTrapPort OBJECT-TYPE The SNMP trapping port. | 1.3.6.1.4.1.40297.1.2.2.9 | INTEGER (162) | read-only | mandatory |
| rptchannelParaTable OBJECT-TYPE The table of channel's parameters relevant to the repeater's channels. | 1.3.6.1.4.1.40297.1.2.2.10 | not-accessible | mandatory | |
| channelParaEntry OBJECT-TYPE The channel's parameters for one of the repeater's channels. | 1.3.6.1.4.1.40297.1.2.2.10.1 | not-accessible | mandatory | |
| channelParaIndex OBJECT-TYPE The index of the table which uniquely identifies the channel's parameters. | 1.3.6.1.4.1.40297.1.2.2.10.1.1 | INTEGER | read-only | mandatory |
| actChannelAlias OBJECT-TYPE The channel alias. It is an unicode string | 1.3.6.1.4.1.40297.1.2.2.10.1.2 | OCTET STRING (SIZE(32)) | read-only | mandatory |
| actChannelType OBJECT-TYPE The channel type. digital(0), analog(1), mixed(2). | 1.3.6.1.4.1.40297.1.2.2.10.1.3 | INTEGER | read-only | mandatory |
| actTxPower OBJECT-TYPE The transmit power level. high(0), low(2). | 1.3.6.1.4.1.40297.1.2.2.10.1.4 | INTEGER | read-only | mandatory |
| actChannelNo OBJECT-TYPE The channel number in the repeater's zone. | 1.3.6.1.4.1.40297.1.2.2.10.1.5 | INTEGER | read-only | mandatory |
| actChannelSubNo OBJECT-TYPE The channel number in the group of same type. | 1.3.6.1.4.1.40297.1.2.2.10.1.6 | INTEGER | read-only | mandatory |
| rptForbid OBJECT-TYPE The status of the repeater's all function. nomal(0), forbid(1). If the repeater is forbided, you can only wake up it by setting the rptRadioStatus object to 0 in local RDAC model. | 1.3.6.1.4.1.40297.1.2.2.11 | INTEGER (0..1) | read-write | mandatory |
| rptLog OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.3 | |||
| logTable OBJECT-TYPE The table of alarm records. | 1.3.6.1.4.1.40297.1.2.3.1 | not-accessible | mandatory | |
| logEntry OBJECT-TYPE The record's content. | 1.3.6.1.4.1.40297.1.2.3.1.1 | not-accessible | mandatory | |
| logIndex OBJECT-TYPE The index of the table which uniquely identifies the alram record. | 1.3.6.1.4.1.40297.1.2.3.1.1.1 | INTEGER (1..100) | read-only | mandatory |
| alarmName OBJECT-TYPE The alarm name. temperature alarm(0), fan alarm(1), vswr alarm(2), low forward power alarm(3), low voltage alarm(4), high voltage alarm(5), tx unlock alarm(6), rx unlock alarm(7), battery voltage alarm(8), invalid(65535). | 1.3.6.1.4.1.40297.1.2.3.1.1.2 | INTEGER (0..9 | 65535) | read-only | mandatory |
| alarmStatus OBJECT-TYPE The alarm status. alarm recove(0), alarm happen(1), invalid(65535). | 1.3.6.1.4.1.40297.1.2.3.1.1.3 | INTEGER (0..1 | 65535) | read-only | mandatory |
| logTime OBJECT-TYPE The alarm time. unit: second. The time is the time lapsed since the repeater starting up. If the value is -1, the record is invalid. | 1.3.6.1.4.1.40297.1.2.3.1.1.4 | INTEGER (-1..134217728) | read-only | mandatory |
| clearLog OBJECT-TYPE Clear the log. do nothing(0), clear log(0). | 1.3.6.1.4.1.40297.1.2.3.2 | INTEGER (0..1) | read-write | mandatory |
| recordCount OBJECT-TYPE The number of records. | 1.3.6.1.4.1.40297.1.2.3.3 | INTEGER (0..100) | read-only | mandatory |
| latestRecordPosition OBJECT-TYPE The row number of the latest record. If the value is 0, there is no valid record in the table. | 1.3.6.1.4.1.40297.1.2.3.4 | INTEGER (0..100) | read-only | mandatory |
| rptSystemInfo OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.4 | |||
| rptModelName OBJECT-TYPE The model name. It is an unicode string. | 1.3.6.1.4.1.40297.1.2.4.1 | OCTET STRING (SIZE(0..32)) | read-only | mandatory |
| rptModelNo OBJECT-TYPE The model number. It is an unicode string. | 1.3.6.1.4.1.40297.1.2.4.2 | OCTET STRING (SIZE(0..64)) | read-only | mandatory |
| rptFirmwareVersion OBJECT-TYPE The firmware version. It is an unicode string. | 1.3.6.1.4.1.40297.1.2.4.3 | OCTET STRING (SIZE(0..32)) | read-only | mandatory |
| rptRcdbVersion OBJECT-TYPE The RCDB version. It is an unicode string. | 1.3.6.1.4.1.40297.1.2.4.4 | OCTET STRING (SIZE(0..32)) | read-only | mandatory |
| rptSerialNo OBJECT-TYPE The serial number. It is an unicode string. | 1.3.6.1.4.1.40297.1.2.4.5 | OCTET STRING (SIZE(0..32)) | read-only | mandatory |
| rptRadioAlias OBJECT-TYPE The repeater alias. It is an unicode string. | 1.3.6.1.4.1.40297.1.2.4.6 | OCTET STRING (SIZE(0..32)) | read-only | mandatory |
| rptRadioID OBJECT-TYPE The ID of the repeater. | 1.3.6.1.4.1.40297.1.2.4.7 | INTEGER | read-only | mandatory |
| rptCurChannelType OBJECT-TYPE The type of the wroking channel. digital(0), analog(1), mixed(2). | 1.3.6.1.4.1.40297.1.2.4.8 | INTEGER (0..2) | read-only | mandatory |
| rptChannelName OBJECT-TYPE The name of the current channel. It is an unicode string. | 1.3.6.1.4.1.40297.1.2.4.9 | OCTET STRING (SIZE(32)) | read-only | mandatory |
| rptCurTxFreq OBJECT-TYPE The current transmitting frequency. unit: Hz. | 1.3.6.1.4.1.40297.1.2.4.10 | INTEGER (100000000..550000000) | read-only | mandatory |
| rptCurRxFreq OBJECT-TYPE The current receiving frequency. unit: Hz. | 1.3.6.1.4.1.40297.1.2.4.11 | INTEGER (100000000..550000000) | read-only | mandatory |
| rptWorkState OBJECT-TYPE The work status of the repeater. receive(0), transmit(1). | 1.3.6.1.4.1.40297.1.2.4.12 | INTEGER | read-only | mandatory |
| rptCurZoneAlias OBJECT-TYPE The alias of the current zone. It is an unicode string. | 1.3.6.1.4.1.40297.1.2.4.13 | OCTET STRING (SIZE(32)) | read-only | mandatory |
| rptConfiguration OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5 | |||
| rptBasicSetting OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5.1 | |||
| powerOn OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5.1.1 | |||
| designatedPowerOnChn OBJECT-TYPE Designate the power on channel. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.1.1.1 | INTEGER (0..1) | read-write | mandatory |
| powerOnChannelNo OBJECT-TYPE The the power on channel number. invalid(65535). | 1.3.6.1.4.1.40297.1.2.5.1.1.2 | INTEGER (0..15 | 65535) | read-write | mandatory |
| microphone OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5.1.2 | |||
| internalMicGain OBJECT-TYPE The gain of the internal microphone. It is double of the real value. | 1.3.6.1.4.1.40297.1.2.5.1.2.1 | INTEGER (4..36) | read-write | mandatory |
| externalMicGain OBJECT-TYPE The gain of the external microphone. It is double of the real value. | 1.3.6.1.4.1.40297.1.2.5.1.2.2 | INTEGER (4..36) | read-write | mandatory |
| multiCTCCDCTable OBJECT-TYPE The table of subaudio frequency. | 1.3.6.1.4.1.40297.1.2.5.1.3 | not-accessible | mandatory | |
| multiCTCCDCEntry OBJECT-TYPE The subaudio frequency. | 1.3.6.1.4.1.40297.1.2.5.1.3.1 | not-accessible | mandatory | |
| ctcssIndex OBJECT-TYPE The index of the table which uniquely identifies the subaudio frequency. | 1.3.6.1.4.1.40297.1.2.5.1.3.1.1 | INTEGER (1..16) | read-only | mandatory |
| txCtcssFrequency OBJECT-TYPE The transmitting subaudio frequency. The value is limitted to the range. The range is changed with the type: 0 (txCtcssType: none) 19~492 (txCtcssType: CDCSS or CDCSS invert) 670~2541 (txCtcssType: CTCSS) The value is 10 times of the real value when the type is CTCSS. The value in first row is unable to be set. It's not able to be set, unless the rxCtcssType in the same row is not none. It will be set to the matched minimum available value automatically, when the txCtcssType in the same row is changed. | 1.3.6.1.4.1.40297.1.2.5.1.3.1.2 | INTEGER (0 | 19..492 | 670..2541) | read-write | mandatory |
| txCtcssType OBJECT-TYPE The type of the transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). The value in first row is unable to be set. It's not able to be set, unless the rxCtcssType in the same row is not none. | 1.3.6.1.4.1.40297.1.2.5.1.3.1.3 | INTEGER (0..3) | read-write | mandatory |
| rxCtcssFrequency OBJECT-TYPE The receiving subaudio frequency. The value is limitted to the range and is not allowed to duplicate but 0. The range is changed with the type:0 0 (rxCtcssType: none) 19~492 (rxCtcssType: CDCSS or CDCSS invert) 670~2541 (rxCtcssType: CTCSS) The value is 10 times of the real value when the type is CTCSS. The value in first row is unable to be set. It will be set to the matched minimum available value automatically, when the rxCtcssType in the same row is changed. | 1.3.6.1.4.1.40297.1.2.5.1.3.1.4 | INTEGER (0 | 19..492 | 670..2541) | read-write | mandatory |
| rxCtcssType OBJECT-TYPE The type of the receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). It must be set according to line sequence. The value in first row is unable to be set. | 1.3.6.1.4.1.40297.1.2.5.1.3.1.5 | INTEGER (0..3) | read-write | mandatory |
| audioPriority OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5.1.4 | |||
| pathPriority OBJECT-TYPE The transmit path priority. PTT request(0), repeat request(1), first come first send(2). | 1.3.6.1.4.1.40297.1.2.5.1.4.1 | INTEGER (0..2) | read-write | mandatory |
| pttPriority OBJECT-TYPE The PTT priority. external PTT(0), front PTT(1), remote PTT(2), first come first send(3). | 1.3.6.1.4.1.40297.1.2.5.1.4.2 | INTEGER (0..3) | read-write | mandatory |
| jitterBufferLenth OBJECT-TYPE The jitter buffer length. | 1.3.6.1.4.1.40297.1.2.5.1.5 | INTEGER (1..8) | read-write | mandatory |
| analogCallHangTime OBJECT-TYPE The analog call hang time. unit: second. | 1.3.6.1.4.1.40297.1.2.5.1.6 | INTEGER (0..70) | read-write | mandatory |
| repeatRequestPriority OBJECT-TYPE The repeat request priority. local repeating(0), IP connect repeating(1), first come first send(2). | 1.3.6.1.4.1.40297.1.2.5.1.7 | INTEGER (0..2) | read-write | mandatory |
| rptDigitalChannelSetting OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5.2 | |||
| digitalChnTable OBJECT-TYPE The table of digital channel's configuration parameters relevant to the repeater's digital channels. | 1.3.6.1.4.1.40297.1.2.5.2.1 | not-accessible | mandatory | |
| digitalChnEntry OBJECT-TYPE The digital channel's configuration parameters for one of the repeater's digital channels. | 1.3.6.1.4.1.40297.1.2.5.2.1.1 | not-accessible | mandatory | |
| digitalChnIndex OBJECT-TYPE The index of the table which uniquely identifies the digital channel's parameter. It also represents the channel number which is counted from 1. | 1.3.6.1.4.1.40297.1.2.5.2.1.1.1 | INTEGER (1..16) | read-only | mandatory |
| digitalColorCode OBJECT-TYPE The color code. | 1.3.6.1.4.1.40297.1.2.5.2.1.1.2 | INTEGER (0..15) | read-write | mandatory |
| digitalIpMultisiteConnect OBJECT-TYPE The multisite connecting based on network. None(0), slot1(1), slot2(2), slot1&slot2(3). | 1.3.6.1.4.1.40297.1.2.5.2.1.1.3 | INTEGER (0..3) | read-write | mandatory |
| digitalReceiveFrequency OBJECT-TYPE The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. | 1.3.6.1.4.1.40297.1.2.5.2.1.1.4 | INTEGER (100000000..550000000) | read-write | mandatory |
| digitalTransmitFrequency OBJECT-TYPE The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. | 1.3.6.1.4.1.40297.1.2.5.2.1.1.5 | INTEGER (100000000..550000000) | read-write | mandatory |
| digitalTxContactName OBJECT-TYPE The row number of transmitting contact name. none(0), row number(1~512). The value is limmited by the number of rows in contact table. | 1.3.6.1.4.1.40297.1.2.5.2.1.1.6 | INTEGER (0..512) | read-write | mandatory |
| rptAnalogChannelSetting OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5.3 | |||
| analogChnTable OBJECT-TYPE The table of analog channel's configuration parameters relevant to the repeater's analog channels. | 1.3.6.1.4.1.40297.1.2.5.3.1 | not-accessible | mandatory | |
| analogChnEntry OBJECT-TYPE The analog channel's configuration parameters for one of the repeater's analog channels. | 1.3.6.1.4.1.40297.1.2.5.3.1.1 | not-accessible | mandatory | |
| analogChnIndex OBJECT-TYPE The index of the table which uniquely identifies the analog channel's parameters. It also represents the channel number which is counted from 1. | 1.3.6.1.4.1.40297.1.2.5.3.1.1.1 | INTEGER (1..16) | read-only | mandatory |
| analogCarrierSquelchLevel OBJECT-TYPE The carrier squelch level. open(0), normal(1), tight(2) | 1.3.6.1.4.1.40297.1.2.5.3.1.1.2 | INTEGER (0..2) | read-write | mandatory |
| analogMultiCtcCdc OBJECT-TYPE The multiCtcCdc control. disable(0), enable(1). It can't be set to enable until the analogRxCtcCdcType is not 0 and there is some valid data is multiCTCCDCTable. | 1.3.6.1.4.1.40297.1.2.5.3.1.1.3 | INTEGER (0..1) | read-write | mandatory |
| analogPreEmp OBJECT-TYPE The pre-emphasis control. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.3.1.1.4 | INTEGER (0..1) | read-write | mandatory |
| analogScrambler OBJECT-TYPE The scrambler control. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.3.1.1.5 | INTEGER (0..1) | read-write | mandatory |
| analogFlatAudio OBJECT-TYPE The flat audio control. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.3.1.1.6 | INTEGER (0..1) | read-write | mandatory |
| analogReceiveFrequency OBJECT-TYPE The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. | 1.3.6.1.4.1.40297.1.2.5.3.1.1.7 | INTEGER (100000000..550000000) | read-write | mandatory |
| analogRxCtcCdcType OBJECT-TYPE The type of receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). | 1.3.6.1.4.1.40297.1.2.5.3.1.1.8 | INTEGER (0..3) | read-write | mandatory |
| analogRxCtcss OBJECT-TYPE The value of receiving CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType. | 1.3.6.1.4.1.40297.1.2.5.3.1.1.9 | INTEGER (670..2541 | 65535) | read-write | mandatory |
| analogRxCdcss OBJECT-TYPE The value of receiving CDCSS. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType. | 1.3.6.1.4.1.40297.1.2.5.3.1.1.10 | INTEGER (19..492 | 65535) | read-write | mandatory |
| analogTransmitFrequency OBJECT-TYPE The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. | 1.3.6.1.4.1.40297.1.2.5.3.1.1.11 | INTEGER (100000000..550000000) | read-write | mandatory |
| analogTxCtcCdcType OBJECT-TYPE The type of transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). | 1.3.6.1.4.1.40297.1.2.5.3.1.1.12 | INTEGER (0..3) | read-write | mandatory |
| analogTxCtcss OBJECT-TYPE The value of transmitting CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is limited by analogTxCtcCdcType. | 1.3.6.1.4.1.40297.1.2.5.3.1.1.13 | INTEGER (670..2541 | 65535) | read-write | mandatory |
| analogTxCdcss OBJECT-TYPE The value of transmitting CDCSS. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType. | 1.3.6.1.4.1.40297.1.2.5.3.1.1.14 | INTEGER (19..492 | 65535) | read-write | mandatory |
| rptMixedChannelSetting OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5.4 | |||
| mixedChnTable OBJECT-TYPE The table of mixed channel's configuration parameters relevant to the repeater's mixed channels. | 1.3.6.1.4.1.40297.1.2.5.4.1 | not-accessible | mandatory | |
| mixedChnEntry OBJECT-TYPE The mixed channel's configuration parameters for one of the repeater's mixed channels. | 1.3.6.1.4.1.40297.1.2.5.4.1.1 | not-accessible | mandatory | |
| mixedChnIndex OBJECT-TYPE The index of the table which uniquely identifies the mixed channel's parameters. It also represents the channel number which is counted from 1. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.1 | INTEGER (1..16) | read-only | mandatory |
| mixedCarrierSquelchLevel OBJECT-TYPE The carrier squelch level control. open(0), normal(1), tight(2). | 1.3.6.1.4.1.40297.1.2.5.4.1.1.2 | INTEGER (0..2) | read-write | mandatory |
| mixedTxContactName OBJECT-TYPE The row number of transmitting contact name. none(0), row number(1~512). The value is limited to the numbers of row in the contact table. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.3 | INTEGER (0..512) | read-write | mandatory |
| mixedIpMultisiteConnect OBJECT-TYPE The multisite connecting based on network. none(0), slot1(1), slot 2(2), slot1&slot2(3). | 1.3.6.1.4.1.40297.1.2.5.4.1.1.4 | INTEGER (0..3) | read-write | mandatory |
| mixedColorCode OBJECT-TYPE The color code. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.5 | INTEGER (0..15) | read-write | mandatory |
| mixedTxChannelType OBJECT-TYPE The type of transmitting channel. digital(0), analog(1). | 1.3.6.1.4.1.40297.1.2.5.4.1.1.6 | INTEGER (0..1) | read-write | mandatory |
| mixedPreEmp OBJECT-TYPE The pre-emphasis control. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.4.1.1.7 | INTEGER (0..1) | read-write | mandatory |
| mixedScrambler OBJECT-TYPE The scrambler control. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.4.1.1.8 | INTEGER (0..1) | read-write | mandatory |
| mixedFlatAudio OBJECT-TYPE The flat audio control. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.4.1.1.9 | INTEGER (0..1) | read-write | mandatory |
| mixedMultiCtcCdc OBJECT-TYPE The multiCtcCdc control. disable(0), enable(1). It can't be set to enable until the mixedRxCtcCdcType is not 0 and there is some valid data in multiCTCCDC Table. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.10 | INTEGER (0..1) | read-write | mandatory |
| mixedReceiveFrequency OBJECT-TYPE The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.11 | INTEGER (100000000..550000000) | read-write | mandatory |
| mixedRxCtcCdcType OBJECT-TYPE The type of receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). | 1.3.6.1.4.1.40297.1.2.5.4.1.1.12 | INTEGER (0..3) | read-write | mandatory |
| mixedRxCtcss OBJECT-TYPE The value of receiving CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.13 | INTEGER (670..2541 | 65535) | read-write | mandatory |
| mixedRxCdcss OBJECT-TYPE The value of receiving CDCSS. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.14 | INTEGER (19..492 | 65535) | read-write | mandatory |
| mixedTransmitFrequency OBJECT-TYPE The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.15 | INTEGER (100000000..550000000) | read-write | mandatory |
| mixedTxCtcCdcType OBJECT-TYPE The type of transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). | 1.3.6.1.4.1.40297.1.2.5.4.1.1.16 | INTEGER (0..3) | read-write | mandatory |
| mixedTxCtcss OBJECT-TYPE The value of transmitting CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.17 | INTEGER (670..2541 | 65535) | read-write | mandatory |
| mixedTxCdcss OBJECT-TYPE The value of transmitting CDCSS. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType. | 1.3.6.1.4.1.40297.1.2.5.4.1.1.18 | INTEGER (19..492 | 65535) | read-write | mandatory |
| rptServiceSetting OBJECT-IDENTITY | 1.3.6.1.4.1.40297.1.2.5.5 | |||
| groupCallHangTime OBJECT-TYPE The group call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit. | 1.3.6.1.4.1.40297.1.2.5.5.1 | INTEGER (0..60) | read-write | mandatory |
| privateCallHangTime OBJECT-TYPE The private call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit. | 1.3.6.1.4.1.40297.1.2.5.5.2 | INTEGER (0..60) | read-write | mandatory |
| emergencyCallHangTime OBJECT-TYPE The emergency call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit. | 1.3.6.1.4.1.40297.1.2.5.5.3 | INTEGER (0..60) | read-write | mandatory |
| sit OBJECT-TYPE The sit. unit: second. transmit always(0), the value of sit(2~120). The value is 2 times of the real value and should not be less than groupCallHangTime, privateCallHangTime and emergencyCallHangTime. | 1.3.6.1.4.1.40297.1.2.5.5.4 | INTEGER (0 | 2..120) | read-write | mandatory |
| txPreambleDuration OBJECT-TYPE The preamble duration. unit: milisecond. The value is 1/60 times of the real value. | 1.3.6.1.4.1.40297.1.2.5.5.5 | INTEGER (0..144) | read-write | mandatory |
| beaconTxMode OBJECT-TYPE The beacon transmit mode. local(0), network(1). | 1.3.6.1.4.1.40297.1.2.5.5.6 | INTEGER (0..1) | read-write | mandatory |
| beaconDuration OBJECT-TYPE The beacon duration. unit: milisecond. disable(0), beacon duration(4~150). The value is 1/120 times of the real value | 1.3.6.1.4.1.40297.1.2.5.5.7 | INTEGER (0 | 4..150) | read-write | mandatory |
| beaconInterval OBJECT-TYPE The beacon interval. unit: second. | 1.3.6.1.4.1.40297.1.2.5.5.8 | INTEGER (10..600) | read-write | mandatory |
| multisiteAccessManagement OBJECT-TYPE The multisite access management control. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.5.9 | INTEGER (0..1) | read-write | mandatory |
| accessManagement OBJECT-TYPE The access management control. disable(0), enable(1). | 1.3.6.1.4.1.40297.1.2.5.5.10 | INTEGER (0..1) | read-write | mandatory |
| multisiteAccessManageTable OBJECT-TYPE The table of multisite access management's parameters relevant to the multisite access management. | 1.3.6.1.4.1.40297.1.2.5.5.11 | not-accessible | mandatory | |
| multisiteAccessManageEntry OBJECT-TYPE The multisite management parameters. | 1.3.6.1.4.1.40297.1.2.5.5.11.1 | not-accessible | mandatory | |
| multisiteAccessManageIndex OBJECT-TYPE The index of the table which uniquely identifies the multisite access management's parameters. | 1.3.6.1.4.1.40297.1.2.5.5.11.1.1 | INTEGER (1..32) | read-only | mandatory |
| multisiteStartId OBJECT-TYPE The start ID. invalid record(0), start ID(1~16776415). It can't be set until multisiteAccessManagement is enable and the previous row is set. If it is set, the matched multisiteIdLength and multisiteAccessCallType will be set to 100 and 1 automaticly. | 1.3.6.1.4.1.40297.1.2.5.5.11.1.2 | INTEGER (0..16776415) | read-write | mandatory |
| multisiteIdLength OBJECT-TYPE The ID length. invalid(65535), ID length(1~255). It can't be set until the multisiteAccessManagement is enable and the matched multisiteStartId is set. | 1.3.6.1.4.1.40297.1.2.5.5.11.1.3 | INTEGER (1..255 | 65535) | read-write | mandatory |
| multisiteAccessCallType OBJECT-TYPE The call type. private call(0), group call(1), invalid(65535). It can't be set until multisiteAccessManagement is enable. | 1.3.6.1.4.1.40297.1.2.5.5.11.1.4 | INTEGER (0..1 | 65535) | read-write | mandatory |
| contactTable OBJECT-TYPE The table of contacts. It is not allowed to add a new contact information. | 1.3.6.1.4.1.40297.1.2.5.5.12 | not-accessible | mandatory | |
| contactEntry OBJECT-TYPE The contact information. | 1.3.6.1.4.1.40297.1.2.5.5.12.1 | not-accessible | mandatory | |
| contactIndex OBJECT-TYPE The index of the table which uniquely identifies the contact information. | 1.3.6.1.4.1.40297.1.2.5.5.12.1.1 | INTEGER (1..512) | read-only | mandatory |
| callAlias OBJECT-TYPE The call alias. It is an unicode string. The value should be exclusive. | 1.3.6.1.4.1.40297.1.2.5.5.12.1.2 | OCTET STRING (SIZE(32)) | read-write | mandatory |
| contactCallType OBJECT-TYPE The call type. private call(0), group call(1), all call(2), invalid(65535). If the contactCallType is all call, the matched callId will be set to 16777215 automatically. The number of all call contact must be less than 2. | 1.3.6.1.4.1.40297.1.2.5.5.12.1.3 | INTEGER (0..2 | 65535) | read-write | mandatory |
| callId OBJECT-TYPE The call ID. invalid(0), call ID(1~16776415,16777215). The callId should be exclusive in the group of same call type. | 1.3.6.1.4.1.40297.1.2.5.5.12.1.4 | INTEGER (0..16776415 | 16777215) | read-write | mandatory |
| accessManageTable OBJECT-TYPE The table of access management's parameters relevant to the access management. | 1.3.6.1.4.1.40297.1.2.5.5.13 | not-accessible | mandatory | |
| accessManageEntry OBJECT-TYPE The access management parameters. | 1.3.6.1.4.1.40297.1.2.5.5.13.1 | not-accessible | mandatory | |
| accessManageIndex OBJECT-TYPE The index of the table which uniquely identifies the access management's parameters. | 1.3.6.1.4.1.40297.1.2.5.5.13.1.1 | INTEGER (1..32) | read-only | mandatory |
| startId OBJECT-TYPE The start ID. invalid record(0), start ID(1~16776415). It can't be set until accessManagement is enable and the previous row is set. If it is set, the matched idLength will be set to 100 automaticly. | 1.3.6.1.4.1.40297.1.2.5.5.13.1.2 | INTEGER (0..16776415) | read-write | mandatory |
| idLength OBJECT-TYPE The ID length. invalid(65535), ID length(1~255). It can't be set until the accessManagement is enable and the matched startId is set. | 1.3.6.1.4.1.40297.1.2.5.5.13.1.3 | INTEGER (1..255 | 65535) | read-write | mandatory |
| repeatTOTTime OBJECT-TYPE The repeat TOT time. unit: second. The value is 1/5 times of the real value. | 1.3.6.1.4.1.40297.1.2.5.5.14 | INTEGER (0 | 3..120) | read-only | mandatory |
| rerepeatTOTTime OBJECT-TYPE The rerepeat TOT time. unit: second. | 1.3.6.1.4.1.40297.1.2.5.5.15 | INTEGER (1..60) | read-only | mandatory |