MIBs Depot

HUAWEI-WLAN-SYS-MIB

Registered at
1.3.6.1.4.1.2011.6.139.1
Last updated
2014-10-23 16:00
Organization
Huawei Technologies Co.,Ltd.
Revisions
2014-10-23 16:00, 2014-03-21 16:00, 2013-12-20 09:58, 2013-11-12 10:16, 2013-11-12 10:16, 2013-10-23 17:22, 2013-05-23 00:00, 2010-11-01 00:00, 2010-09-27 00:00, 2010-09-15 00:00, 2010-09-10 00:00, 2010-07-06 00:00, 2010-06-08 00:00
Namespace
huawei
Source file
HUAWEI-WLAN-SYS-MIB
Digest
sha256:a64a6c3013092988dbeca322d4c121ac4fb9839060d6a14ab2f56c90fa44e2df

Description

add table of hwWlanStaIpv6Switch,and notes for sta ipv6 service.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-WLAN-MIBhwWlan
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HUAWEI-MIB
HUAWEI-WLAN-MIB
HUAWEI-WLAN-SYS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hwWlanTrapRestrain
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.1
hwWlanTrapRestrainAll
OBJECT-TYPE
All wlan trap restrain switch. If this switch is enabled, all the traps on ac will not be sent.
1.3.6.1.4.1.2011.6.139.1.1.1INTEGER {enable(1), disable(2)}read-writecurrent
hwWlanTrapSeverityRestrain
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.1.2
hwWlanTrapSeverityRestrainSeverity
OBJECT-TYPE
Wlan trap restrain by severity. critical: means the trap whose severity is not higner than critical will not be sent. major: means the trap whose severity is not higner than major will not be sent. minor: means the trap whose severity is not higner than minor will not be sent. warning: means the trap whose severity is not higner than warning will not be sent. none: means all the severities of traps can be sent.
1.3.6.1.4.1.2011.6.139.1.1.2.1INTEGER {critical(1), major(2), minor(3), warning(4), none(5)}read-writecurrent
hwWlanApRegionTrapRestrain
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.1.3
hwWlanApRegionTrapRestrainRegionIndexMask
OBJECT-TYPE
Wlan trap restrain by ap region. Every bit is used to describe the region's trap will be restrained or not. 0 means not restrain, and 1 means restrain. Each Byte describes 8 regions are restrained or not. The value of this node is hexadecimal integer block. For example, the first Byte describes region 0~7 is restrained or not, and the second Byte describes region 8~15 is restrained or not. Such as, if only region 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
1.3.6.1.4.1.2011.6.139.1.1.3.1OCTET STRINGread-writecurrent
hwWlanApTrapRestrain
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.1.4
hwWlanApTrapRestrainApIndexMask
OBJECT-TYPE
Wlan trap restrain by ap. Every bit is used to describe the ap's trap will be restrained or not. 0 means not restrain, and 1 means restrain. Each Byte describes 8 aps are restrained or not. The value of this node is hexadecimal integer block. For example, the first Byte describes ap 0~7 is restrained or not, and the second Byte describes ap 8~15 is restrained or not. Such as, if only ap 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
1.3.6.1.4.1.2011.6.139.1.1.4.1OCTET STRINGread-writecurrent
hwWlanSysPara
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.2
hwWlanCarrierId
OBJECT-TYPE
The carrier identification. cmcc means 'China mobile communications corporation' , ctc means 'China telecom company' , cuc means 'China unicom company', other means 'Other company',
1.3.6.1.4.1.2011.6.139.1.2.1INTEGER {cmcc(1), ctc(2), cuc(3), other(65535)}read-writecurrent
hwWlanAcId
OBJECT-TYPE
The ac identification. The carrier must set ac id and carrier id before use. In this case, APs can check each other whether blong to a same AC.
1.3.6.1.4.1.2011.6.139.1.2.2Integer32read-writecurrent
hwWlanForwardMode
OBJECT-TYPE
AC forward mode.It can be set ess(1): ess mode ap(2): ap mode
1.3.6.1.4.1.2011.6.139.1.2.3INTEGER {ess(1), ap(2)}read-writecurrent
hwWlanAcNEnumber
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.4OCTET STRINGread-writecurrent
hwWlanAcAccessMaxApNumber
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.5Integer32read-onlycurrent
hwAcCountryCode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.6OCTET STRINGread-writecurrent
hwWlanApUsername
OBJECT-TYPE
Description: When set, need to together with password, and the username length is 4 to 31 characters.
1.3.6.1.4.1.2011.6.139.1.2.8OCTET STRING (SIZE(4..31))read-writecurrent
hwWlanApPassword
OBJECT-TYPE
Description: When set, need to together with username, and the password length is 8 to 32 characters which must contain at least one capital letter, one lowcase letter and one number.
1.3.6.1.4.1.2011.6.139.1.2.9OCTET STRING (SIZE(8..32))read-writecurrent
hwWlanUsernamePasswordApId
OBJECT-TYPE
Description: The node is useful only when get the username or password and must be set first and read with username or password. When get the username or password without the node ,it means get the gloable configuration from AC, otherwise, it means get the specified AP' username or password from AP. For when change the username or password,and not commit, the AC's configuration is diffrent with AP' real configuration. When specified the AP ID , and the AP is not in the normal state, return the username or password from AC's gloable configuration.
1.3.6.1.4.1.2011.6.139.1.2.10Integer32read-writecurrent
hwWlanApLldpSwitch
OBJECT-TYPE
Description: Global AP LLDP switch.
1.3.6.1.4.1.2011.6.139.1.2.11INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanAcAccessMaxStaNumber
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.12Integer32read-onlycurrent
hwWlanAcDtlsSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.13INTEGER {enable(1), disable(2)}read-writecurrent
hwWlanAcDtlsPsk
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.14OCTET STRING (SIZE(1..32))read-writecurrent
hwWlanApLogManualBackupApId
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.15Integer32read-writecurrent
hwWlanAcDtlsDefaultPskSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.16INTEGER {enable(1), disable(2)}read-writecurrent
hwWlanWorkMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.17INTEGER {ac(1), ap(2)}read-onlycurrent
hwWlanIpv6Enable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.18INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanInterAcDtlsEncrpyt
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.19INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanInterAcDtlsPsk
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.2.20OCTET STRING (SIZE(1..32))read-writecurrent
hwWlanStaIpv6Switch
OBJECT-TYPE
Whether to process IPv6 services of STAs.
1.3.6.1.4.1.2011.6.139.1.2.21INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanAcSourceInterface
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.3
hwWlanAcSourceInterfaceValue
OBJECT-TYPE
the value of wlan ac source interface.
1.3.6.1.4.1.2011.6.139.1.3.1Integer32read-writecurrent
hwWlanAcSourceInterfaceMethod
OBJECT-TYPE
operation method of wlan ac source interface.It can be set default(1): use default setting vlanif(2): use vlanif interface loopback(3): use loopback interface ipaddress(4):user ip address
1.3.6.1.4.1.2011.6.139.1.3.2INTEGER {default(1), vlanif(2), loopback(3), ipaddress(4)}read-writecurrent
hwWlanAcSourceIPv4Address
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.3.3IpAddressread-writecurrent
hwWlanBatchQuery
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.4
hwWlanBatchQueryType
OBJECT-TYPE
Data type of Batch query. For example, apProfName(1) can be used to get ap-profile-name list. The batch query support two modes, the number mode and the ID list mode, binding the node hwWlanBatchRequestNum and hwWlanBatchStartCount means use the number mode, binding the node hwWlanBatchRequestIdList, hwWlanBatchRequestIdSize hwWlanBatchRequestIdNum means use the ID list mode.
1.3.6.1.4.1.2011.6.139.1.4.1INTEGER {apProfName(1), apWhiteListMac(2), apWhiteListSn(3), apBlackListMac(4), apBlackListSn(5), apRegionId(6), apRegionIdModeName(7), apId(8), apIdState(9), apIdStateRegionName(10), unauthApIdMac(11), radioProfName(12), radioBalanceGroupName(13), uncontrolApIdBssidAuthApId(14), essNameSsid(15), wmmProfName(16), trafficProfName(17), secProfName(18), authMacStateType(19), clear(65535)}read-writecurrent
hwWlanBatchRequestNum
OBJECT-TYPE
The request number of the batch query, it used in number mode. This node must be set in company with the node hwWlanBatchStartCount. For example, there are 6 ap-profiles(0 1 3 5 6 9) in the AC, Set hwWlanBatchQuery to apProfName(1), set hwWlanBatchRequestNum to 3, and set hwWlanBatchStartCount to 2, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum, that means start from the 2nd ap-profile, get 3 ap-profile-names, the result in hwWlanBatchValueList are ap-profile(3 5 6 9).
1.3.6.1.4.1.2011.6.139.1.4.2Integer32read-writecurrent
hwWlanBatchStartCount
OBJECT-TYPE
The start count of the batch query, it used in number mode. This node must be set in company with the node hwWlanBatchRequestNum. For example, there are 6 ap-profiles(0 1 3 5 6 9) in the AC, Set hwWlanBatchQuery to apProfName(1), set hwWlanBatchRequestNum to 3, and set hwWlanBatchStartCount to 2, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum, that means start from the 2nd ap-profile, get 3 ap-profile-names, the result in hwWlanBatchValueList are ap-profile(3 5 6 9).
1.3.6.1.4.1.2011.6.139.1.4.3Integer32read-writecurrent
hwWlanBatchRequestIdList
OBJECT-TYPE
The ID list of the data type, It used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdSize and hwWlanBatchRequestIdNum. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC, set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3), set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)
1.3.6.1.4.1.2011.6.139.1.4.4OCTET STRING (SIZE(0..2048))read-writecurrent
hwWlanBatchRequestIdSize
OBJECT-TYPE
The length of a batch query ID element, it used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdNum. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC, set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3), set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)
1.3.6.1.4.1.2011.6.139.1.4.5Integer32read-writecurrent
hwWlanBatchRequestIdNum
OBJECT-TYPE
The number of batch query by id, it used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdSize. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC, set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3), set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)
1.3.6.1.4.1.2011.6.139.1.4.6Integer32read-writecurrent
hwWlanBatchValueList
OBJECT-TYPE
The returned value list. If the value ended by a string, each value is divided by '?', otherwise , each value will have a fixed length. This node must be get in company with the node hwWlanBatchReturnNum.
1.3.6.1.4.1.2011.6.139.1.4.7OCTET STRING (SIZE(0..6144))read-onlycurrent
hwWlanBatchReturnNum
OBJECT-TYPE
The number of successful query. This node must be get in company with the node hwWlanBatchValueList.
1.3.6.1.4.1.2011.6.139.1.4.8Integer32read-onlycurrent
hwWlanBatchTotalNum
OBJECT-TYPE
Total number of current batch query. For example, There are 10 ap-Profiles in the AC, the value of this node will be 10.
1.3.6.1.4.1.2011.6.139.1.4.9Integer32read-onlycurrent
hwWlanCapwapConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.5
hwWlanCapwapKeepAliveInterval
OBJECT-TYPE
The interval of maintain freshness of the CAPWAP channel, in seconds.
1.3.6.1.4.1.2011.6.139.1.5.1Integer32read-writecurrent
hwWlanCapwapKeepAliveTimes
OBJECT-TYPE
The times of maintain freshness of the CAPWAP channel before it timeout.
1.3.6.1.4.1.2011.6.139.1.5.2Integer32read-writecurrent
hwWlanCapwapControlPriorityACToAP
OBJECT-TYPE
the ac's priority value of CAPWAP control packet,includ cos and tos, ranging between 0 and 7.
1.3.6.1.4.1.2011.6.139.1.5.3Integer32read-writecurrent
hwWlanCapwapControlPriorityAPToAC
OBJECT-TYPE
the ap's priority value of CAPWAP control packet,includ tos, ranging between 0 and 7.
1.3.6.1.4.1.2011.6.139.1.5.4Integer32read-writecurrent
hwWlanAcProtect
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.6
hwWlanAcProtectIpAddress
OBJECT-TYPE
IP address of the backup AC.
1.3.6.1.4.1.2011.6.139.1.6.1IpAddressread-writecurrent
hwWlanAcProtectPriority
OBJECT-TYPE
Dual-link hot backup priorities.
1.3.6.1.4.1.2011.6.139.1.6.2Unsigned32 (0..7)read-writecurrent
hwWlanAcProtectSwitch
OBJECT-TYPE
Dual-link hot backup switch.
1.3.6.1.4.1.2011.6.139.1.6.3INTEGER {enable(1), disable(2)}read-writecurrent
hwWlanAcProtectRestoreSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.6.4INTEGER {enable(1), disable(2)}read-writecurrent
hwUndoWlanAcProtectIpAddress
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.6.5Integer32read-writecurrent
hwUndoWlanAcProtectPriority
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.6.6Integer32read-writecurrent
hwWlanAcProtectIpv6Address
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.6.7OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanConfigChannel
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.7
hwWlan24G20MconfigChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.7.1OCTET STRINGread-onlycurrent
hwWlan24G40MPlusConfigChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.7.2OCTET STRINGread-onlycurrent
hwWlan24G40MMinusConfigChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.7.3OCTET STRINGread-onlycurrent
hwWlan5G20MConfigChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.7.4OCTET STRINGread-onlycurrent
hwWlan5G40MPlusConfigChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.7.5OCTET STRINGread-onlycurrent
hwWlan5G40MMinusConfigChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.7.6OCTET STRINGread-onlycurrent
hwWlanConfigChannelApId
OBJECT-TYPE
Ap index, is used to identify AP uniquely.Query the configurable channel of the ap must contain apid otherwise query are global configurable channel.
1.3.6.1.4.1.2011.6.139.1.7.7Integer32read-writecurrent
hwWlan24G80MConfigChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.7.8OCTET STRINGread-onlycurrent
hwWlan5G80MConfigChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.7.9OCTET STRINGread-onlycurrent
hwWlanStaLoadbalance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.8
hwWlanStaLoadbalanceEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.8.1Integer32read-writecurrent
hwWlanStaLoadbalanceMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.8.2Integer32read-writecurrent
hwWlanStaLoadbalanceSessionGap
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.8.3Integer32read-writecurrent
hwWlanStaLoadbalanceTrafficGap
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.8.4Integer32read-writecurrent
hwWlanStaLoadbalanceAssociateThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.8.5Integer32read-writecurrent
hwWlanHsbConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.9
hwWlanHsbServiceType
OBJECT-TYPE
The hsb service type can be one of the three values: 1, 2, 3 (1: disable(1) 2: hsbGroup(2) 3: hsbService(3)). The default value of this node is 1.
1.3.6.1.4.1.2011.6.139.1.9.1INTEGER {disable(1), hsbGroup(2), hsbService(3)}read-writecurrent
hwWlanHsbGroupId
OBJECT-TYPE
The id of the hsb group used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.1.9.2Unsigned32read-writecurrent
hwWlanHsbTunnelId
OBJECT-TYPE
The id of the hsb tunnel used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.1.9.3Unsigned32read-writecurrent
hwWlanLocation
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.10
hwWlanLocationServerIP
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.10.1IpAddressread-writecurrent
hwWlanLocationServerPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.10.2Integer32read-writecurrent
hwWlanLocationSourceIP
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.10.3IpAddressread-writecurrent
hwWlanLocationApReportToAC
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.10.4Integer32read-writecurrent
hwWlanLocationApReportToServerIp
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.10.5IpAddressread-writecurrent
hwWlanLocationApReportToUdpPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.10.6Integer32read-writecurrent
hwWlanLocationApReportToIpv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.10.7OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanLocationAcReportToIpv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.10.8OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanSpectrumAnalysis
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.11
hwWlanSpectrumAnalysisServerIP
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.11.1IpAddressread-writecurrent
hwWlanSpectrumAnalysisServerPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.11.2Integer32read-writecurrent
hwWlanNonWifiDeviceAgeTime
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.11.3Integer32read-writecurrent
hwWlanSpectrogramServerIP
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.11.4IpAddressread-writecurrent
hwWlanSpectrogramServerPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.11.5Integer32read-writecurrent
hwWlanSpectrumAnalysisServerIPv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.11.6OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanSpectrogramServerIPv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.11.7OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanSysManagementObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.12
hwWlanLBSConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.12.1
hwWlanLBSAeServerPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.1Integer32read-writecurrent
hwWlanLBSAeApReportMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.2INTEGER {off(1), toAc(2), toServer(3)}read-writecurrent
hwWlanLBSAeApReportPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.3Integer32read-writecurrent
hwWlanLBSEkServerIp
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.4IpAddressread-writecurrent
hwWlanLBSEkServerPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.5Integer32read-writecurrent
hwWlanLBSEkApReportMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.6INTEGER {off(1), toAc(2), toServer(3)}read-writecurrent
hwWlanLBSEkApReportIp
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.7IpAddressread-writecurrent
hwWlanLBSEkApReportPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.8Integer32read-writecurrent
hwWlanLBSSourceIp
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.9IpAddressread-writecurrent
hwWlanLBSAeCompoundTime
OBJECT-TYPE
Compound Time of AeroScout Tag Message
1.3.6.1.4.1.2011.6.139.1.12.1.10Integer32read-writecurrent
hwWlanLBSEkServerIpv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.11OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanLBSEkApReportIpv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.12OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanLBSSourceIpv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.12.1.13OCTET STRING (SIZE(0..46))read-writecurrent
hwInterAcManagement
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.13
hwMasterControllerSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.13.1INTEGER {disable(1), enable(2)}read-writecurrent
hwConnectMasterControllerSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.13.2INTEGER {disconnect(1), connect(2)}read-writecurrent
hwConnectMasterControllerIPv4Address
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.13.3IpAddressread-writecurrent
hwConnectMasterControllerIPv6Address
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.1.13.4OCTET STRINGread-writecurrent
hwWlanSysManagementConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.14
hwWlanSysManagementCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.14.1
hwWlanSysManagementObjectGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.1.14.2

Conformance

NameOIDStatus
hwWlanSysManagementCompliance
MODULE-COMPLIANCE
Description.
1.3.6.1.4.1.2011.6.139.1.14.1.1current
hwWlanTrapRestrainGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.1current
hwWlanSysParaGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.2current
hwWlanAcSourceInterfaceGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.3current
hwWlanBatchQueryGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.4current
hwWlanCapwapConfigGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.5current
hwWlanAcProtectGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.6current
hwWlanConfigChannelGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.7current
hwWlanStaLoadbalanceGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.8current
hwWlanHsbConfigGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.9current
hwWlanLocationGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.10current
hwWlanSpectrumAnalysisGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.11current
hwWlanLBSConfigGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.12current
hwInterAcManagementGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.1.14.2.13current