MIBs Depot

HUAWEI-VPN-DIAGNOSTICS-MIB

Registered at
1.3.6.1.4.1.2011.5.25.172
Last updated
2014-01-18 17:22
Organization
Huawei Technologies Co.,Ltd.
Revisions
2014-01-18 17:22, 2013-12-16 09:58, 2013-07-16 16:00, 2008-06-06 16:00
Namespace
huawei
Source file
HUAWEI-VPN-DIAGNOSTICS-MIB
Digest
sha256:2dff295a97ae631fb172a781d23afacd2e5b11526d1250ff20b30e7cf5162018

Description

HUAWEI service quality detect funcion.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-MIBhwDatacomm
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
INET-ADDRESS-MIBInetAddress, InetAddressType
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, mib-2
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HUAWEI-L2VPN-MIB
HUAWEI-MIB
HUAWEI-VPLS-EXT-MIB
HUAWEI-VPN-DIAGNOSTICS-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
P-BRIDGE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
VRRP-MIB

Textual conventions

NameOIDSyntaxAccessStatus
MacOpType
TEXTUAL-CONVENTION
Select test type
current

Objects

NameOIDSyntaxAccessStatus
macoper
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.1
populateBase
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.1.1
hwOamMacPopulateCount
OBJECT-TYPE
Received populate packets in current device.
1.3.6.1.4.1.2011.5.25.172.1.1.1Integer32read-onlycurrent
hwOamMacPurgeCount
OBJECT-TYPE
Received purge packets in current device.
1.3.6.1.4.1.2011.5.25.172.1.1.2Integer32read-onlycurrent
hwOamMacPurgeRegCount
OBJECT-TYPE
Received purge(register) packets in current device.
1.3.6.1.4.1.2011.5.25.172.1.1.3Integer32read-onlycurrent
hwOamMacCountReset
OBJECT-TYPE
Reset the count of hwOamMacPopulateCount and hwOamMacPurgeCount, the value 1 means reset hwOamMacPopulateCount,the value is 2 means reset hwOamMacPurgeCount, the value is 3 means reset hwOamMacPurgeRegCount ,the value is 4 means reset hwOamMacPopulateCount and hwOamMacPurgeCount,hwOamMacPurgeRegCount , When read, it always returns value 4.
1.3.6.1.4.1.2011.5.25.172.1.1.4INTEGER {populatereset(1), purgereset(2), purgeregreset(3), allreset(4)}read-writecurrent
hwOamMacSwitch
OBJECT-TYPE
Indicates the switch of enabling MAC populate,if the value is 1, enable; if the value is 2, disable.
1.3.6.1.4.1.2011.5.25.172.1.1.5INTEGER {enable(1), disable(2)}read-writecurrent
hwOamMacEntryNum
OBJECT-TYPE
The entry number of hwOamMacDisplayTable.
1.3.6.1.4.1.2011.5.25.172.1.1.6Integer32read-onlycurrent
hwOamMacOperTable
OBJECT-TYPE
A table which to be populate or purge operation.
1.3.6.1.4.1.2011.5.25.172.1.2not-accessiblecurrent
hwOamMacOperEntry
OBJECT-TYPE
Entries of hwOamMacOperTable.
1.3.6.1.4.1.2011.5.25.172.1.2.1not-accessiblecurrent
hwOamMacOperIndex
OBJECT-TYPE
The index of hwOamMacOperIndex,it is always 1.
1.3.6.1.4.1.2011.5.25.172.1.2.1.1Integer32 (1)not-accessiblecurrent
hwOamMacOperAddress
OBJECT-TYPE
The MAC that to be populated or purged.
1.3.6.1.4.1.2011.5.25.172.1.2.1.2MacAddressread-createcurrent
hwOamMacOperVsiName
OBJECT-TYPE
The name or other identifier referring to the VSI which is correlative to the hwOamMac.
1.3.6.1.4.1.2011.5.25.172.1.2.1.3OCTET STRING (SIZE(0..32))read-createcurrent
hwOamMacOperType
OBJECT-TYPE
The operate type,1 means populate,2 means purge.
1.3.6.1.4.1.2011.5.25.172.1.2.1.4MacOpTyperead-createcurrent
hwOamMacOperRegister
OBJECT-TYPE
while purge a OAM MAC,register it to be a reserved MAC . 1 means register, 2 means not register. Defaut is 2.
1.3.6.1.4.1.2011.5.25.172.1.2.1.5EnabledStatusread-createcurrent
hwOamMacOperFlood
OBJECT-TYPE
Broadcast the packet or not. 1 means broadcast, 2 means don`t broadcast.Defaut is 2.
1.3.6.1.4.1.2011.5.25.172.1.2.1.6EnabledStatusread-createcurrent
hwOamMacOperNum
OBJECT-TYPE
The number of packets which want to be sent.
1.3.6.1.4.1.2011.5.25.172.1.2.1.7Integer32 (1..5)read-createcurrent
hwOamMacOperRowStatus
OBJECT-TYPE
The operating state of the row.
1.3.6.1.4.1.2011.5.25.172.1.2.1.8RowStatusread-createcurrent
hwOamMacListTable
OBJECT-TYPE
A table which displays the OAM MAC applied at huawei.
1.3.6.1.4.1.2011.5.25.172.1.3not-accessiblecurrent
hwOamMacListEntry
OBJECT-TYPE
Display the OAM MAC applied at huawei.
1.3.6.1.4.1.2011.5.25.172.1.3.1not-accessiblecurrent
hwOamMacListIndex
OBJECT-TYPE
The index of hwOamMacListIndex.
1.3.6.1.4.1.2011.5.25.172.1.3.1.1Integer32 (1..10)not-accessiblecurrent
hwOamMacListAddress
OBJECT-TYPE
The OAM MAC applied at huawei.
1.3.6.1.4.1.2011.5.25.172.1.3.1.2MacAddressread-onlycurrent
hwOamMacDisplayTable
OBJECT-TYPE
A table which displays the result of populate or purge operation.
1.3.6.1.4.1.2011.5.25.172.1.4not-accessiblecurrent
hwOamMacDisplayEntry
OBJECT-TYPE
Entries of hwOamMacDisplayTable.
1.3.6.1.4.1.2011.5.25.172.1.4.1not-accessiblecurrent
hwOamMacDisplayIndex
OBJECT-TYPE
The index of hwOamMacDisplayEntry, the value range is from 1 to 100.
1.3.6.1.4.1.2011.5.25.172.1.4.1.1Integer32 (1..100)not-accessiblecurrent
hwOamMacDisplayAddress
OBJECT-TYPE
The OAM MAC that had been populated or purged.
1.3.6.1.4.1.2011.5.25.172.1.4.1.2MacAddressread-onlycurrent
hwOamMacDisplayType
OBJECT-TYPE
The OAM MAC type, 1 means populate, 2 means purge.
1.3.6.1.4.1.2011.5.25.172.1.4.1.3MacOpTyperead-onlycurrent
hwOamMacDisplayVsiName
OBJECT-TYPE
The name or other identifier referring to the VSI which is correlative to the hwOamMac.
1.3.6.1.4.1.2011.5.25.172.1.4.1.4OCTET STRING (SIZE(0..32))read-onlycurrent
hwOamMacDisplayAgeTime
OBJECT-TYPE
The age time of the entry.
1.3.6.1.4.1.2011.5.25.172.1.4.1.5Integer32read-onlycurrent
hwOamMacDisplayLsrId
OBJECT-TYPE
The LSR-ID of the sender.
1.3.6.1.4.1.2011.5.25.172.1.4.1.6IpAddressread-onlycurrent
macoperConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.1.5
hwOamMacGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.1.5.1
macoperCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.1.5.2
hwVpnCfgPing
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.2
hwVpnCfgPingTable
OBJECT-TYPE
hwVpnCfgPingTable.
1.3.6.1.4.1.2011.5.25.172.2.1not-accessiblecurrent
hwVpnCfgPingEntry
OBJECT-TYPE
This object indicates that the index of this table is hwVpnCfgPingIndex.
1.3.6.1.4.1.2011.5.25.172.2.1.1not-accessiblecurrent
hwVpnCfgPingIndex
OBJECT-TYPE
This object indicates the index of an operation instance.
1.3.6.1.4.1.2011.5.25.172.2.1.1.1Integer32 (1..65535)not-accessiblecurrent
hwVpnCfgPingPeerIpType
OBJECT-TYPE
This object indicates the type of the peer IP address. It is used to identify the value type of hwVpnCfgPingPeerIp, which can be IPv4 or IPv6.
1.3.6.1.4.1.2011.5.25.172.2.1.1.2InetAddressTyperead-createcurrent
hwVpnCfgPingPeerIp
OBJECT-TYPE
This object indicates the peer IP address.
1.3.6.1.4.1.2011.5.25.172.2.1.1.3InetAddressread-createcurrent
hwVpnCfgPingVpnIdType
OBJECT-TYPE
This object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL.
1.3.6.1.4.1.2011.5.25.172.2.1.1.4INTEGER {martiniVPLS(1), kompellaVPLS(2), l3vpn(3), pwe3(4), martiniVLL(5), bgpadVPLS(6), unknown(255)}read-createcurrent
hwVpnCfgPingVpnId
OBJECT-TYPE
This object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL.
1.3.6.1.4.1.2011.5.25.172.2.1.1.5OCTET STRINGread-createcurrent
hwVpnCfgPingPwId
OBJECT-TYPE
This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.
1.3.6.1.4.1.2011.5.25.172.2.1.1.6Integer32read-createcurrent
hwVpnCfgPingTunnelUsed
OBJECT-TYPE
This object indicates the mode of forwarding request packets or response packets (such as tunnel forwarding).
1.3.6.1.4.1.2011.5.25.172.2.1.1.7INTEGER {normal(1), localOnly(2), remoteOnly(3), localAndRemote(4)}read-createcurrent
hwVpnCfgPingOperation
OBJECT-TYPE
This object indicates two values: enable(1) and disable(2). enable(1) indicates that the operation instance is started; disable(2) indicates that the operation instance is stopped.
1.3.6.1.4.1.2011.5.25.172.2.1.1.8EnabledStatusread-createcurrent
hwVpnCfgPingResultDetail
OBJECT-TYPE
This object indicates the result detail of ping operation.
1.3.6.1.4.1.2011.5.25.172.2.1.1.9INTEGER {requestSentReplyRecieved(1), requestSentReplyTimeout(2), requestFailedReplyFailed(3), noResult(255)}read-onlycurrent
hwVpnCfgPingRowStatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.5.25.172.2.1.1.10RowStatusread-createcurrent
hwVpnCfgPingSecondary
OBJECT-TYPE
This object indicates the local secondary PW.
1.3.6.1.4.1.2011.5.25.172.2.1.1.11INTEGER {primary(0), secondary(1), unknown(255)}read-createcurrent
hwVpnCfgPingIfName
OBJECT-TYPE
This object indicates the name of the AC interface.
1.3.6.1.4.1.2011.5.25.172.2.1.1.12DisplayStringread-createcurrent
hwVpnCfgPingPwIdNew
OBJECT-TYPE
This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0. Because hwVpnCfgPingPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295, this object ranging from 0 to 4294967295 is therefore added.
1.3.6.1.4.1.2011.5.25.172.2.1.1.13Unsigned32read-createcurrent
hwVpnCfgPingResultTable
OBJECT-TYPE
hwVpnCfgPingResultTable.
1.3.6.1.4.1.2011.5.25.172.2.2not-accessiblecurrent
hwVpnCfgPingResultEntry
OBJECT-TYPE
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
1.3.6.1.4.1.2011.5.25.172.2.2.1not-accessiblecurrent
hwVpnCfgPingResultLocation
OBJECT-TYPE
This object indicates two values: local(1) and remote(2). local(1) indicates configurations of the local end displayed in the probe result. remote(2) indicates configurations of the peer end displayed in the probe result.
1.3.6.1.4.1.2011.5.25.172.2.2.1.1INTEGER {local(1), remote(2)}not-accessiblecurrent
hwVpnCfgPingResultVpnIdType
OBJECT-TYPE
This object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL.
1.3.6.1.4.1.2011.5.25.172.2.2.1.2INTEGER {martiniVPLS(1), kompellaVPLS(2), l3vpn(3), pwe3(4), martiniVLL(5), bgpadVPLS(6), unknown(255)}read-onlycurrent
hwVpnCfgPingResultVpnId
OBJECT-TYPE
This object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL.
1.3.6.1.4.1.2011.5.25.172.2.2.1.3DisplayStringread-onlycurrent
hwVpnCfgPingResultDesc
OBJECT-TYPE
This object indicates the description of the VPN.
1.3.6.1.4.1.2011.5.25.172.2.2.1.4DisplayStringread-onlycurrent
hwVpnCfgPingResultVpnAdminStatus
OBJECT-TYPE
This object indicates the management status of the VPN: up(1), down(2), and unknown(255).
1.3.6.1.4.1.2011.5.25.172.2.2.1.5INTEGER {up(1), down(2), unknown(255)}read-onlycurrent
hwVpnCfgPingResultOperStatus
OBJECT-TYPE
This object indicates the operation status of the VPN: up(1), down(2), and unknown(255).
1.3.6.1.4.1.2011.5.25.172.2.2.1.6INTEGER {up(1), down(2), unknown(255)}read-onlycurrent
hwVpnCfgPingResultMtu
OBJECT-TYPE
This object indicates the MTU value. The object represents the MTU value of the AC interface when the VPN type is PWE3 or Martini VLL, represents the MTU value of the VSI when the VPN type is VPLS. If the value of the object cannot be obtained, the object value is considered as 0.
1.3.6.1.4.1.2011.5.25.172.2.2.1.7Integer32read-onlycurrent
hwVpnCfgPingResultCeCount
OBJECT-TYPE
This object indicates the number of CEs.
1.3.6.1.4.1.2011.5.25.172.2.2.1.8Integer32read-onlycurrent
hwVpnCfgPingResultActualIpType
OBJECT-TYPE
This object indicates the type of the IP address of the PW on the local PE. It is used to identify the value type of hwVpnCfgPingResultActualIp.
1.3.6.1.4.1.2011.5.25.172.2.2.1.9InetAddressTyperead-onlycurrent
hwVpnCfgPingResultActualIp
OBJECT-TYPE
This object indicates the IP address of the PW on the local PE.
1.3.6.1.4.1.2011.5.25.172.2.2.1.10InetAddressread-onlycurrent
hwVpnCfgPingResultPeerIpType
OBJECT-TYPE
This object indicates the type of the IP address of the PW on the peer PE. It is used to identify the value type of hwVpnCfgPingResultPeerIP.
1.3.6.1.4.1.2011.5.25.172.2.2.1.11InetAddressTyperead-onlycurrent
hwVpnCfgPingResultPeerIp
OBJECT-TYPE
This object indicates the IP address of the PW on the peer PE.
1.3.6.1.4.1.2011.5.25.172.2.2.1.12InetAddressread-onlycurrent
hwVpnCfgPingResultPwId
OBJECT-TYPE
This object indicates PW-ID.
1.3.6.1.4.1.2011.5.25.172.2.2.1.13Integer32read-onlycurrent
hwVpnCfgPingResultPeType
OBJECT-TYPE
This object indicates the type of the PE (Whether the PE is an SPE.)
1.3.6.1.4.1.2011.5.25.172.2.2.1.14INTEGER {upe(1), spe(2), unknown(255)}read-onlycurrent
hwVpnCfgPingResultVcType
OBJECT-TYPE
This object indicates the VC type.
1.3.6.1.4.1.2011.5.25.172.2.2.1.15HWL2VpnVcEncapsTyperead-onlycurrent
hwVpnCfgPingResultLabelIn
OBJECT-TYPE
This object indicates the incoming label of the interface at the PW side.
1.3.6.1.4.1.2011.5.25.172.2.2.1.16Integer32read-onlycurrent
hwVpnCfgPingResultLableOut
OBJECT-TYPE
This object indicates the outgoing label of the interface at the PW side.
1.3.6.1.4.1.2011.5.25.172.2.2.1.17Integer32read-onlycurrent
hwVpnCfgPingResultControlWord
OBJECT-TYPE
This object indicates whether the keyword control-word is configured.
1.3.6.1.4.1.2011.5.25.172.2.2.1.18INTEGER {disable(0), enable(1), unknown(255)}read-onlycurrent
hwVpnCfgPingResultPriOrSec
OBJECT-TYPE
This object indicates whether the local PW is a primary PW or a secondary PW.
1.3.6.1.4.1.2011.5.25.172.2.2.1.19INTEGER {primary(0), secondary(1), unknown(255)}read-onlycurrent
hwVpnCfgPingResultVplsID
OBJECT-TYPE
This object indicates the virtual private LAN service id.
1.3.6.1.4.1.2011.5.25.172.2.2.1.20OCTET STRINGread-onlycurrent
hwVpnCfgPingResultRD
OBJECT-TYPE
This object indicates the route distinguisher.
1.3.6.1.4.1.2011.5.25.172.2.2.1.21OCTET STRINGread-onlycurrent
hwVpnCfgPingResultPwIdNew
OBJECT-TYPE
This object indicates PW-ID. Because hwVpnCfgPingResultPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295, this object ranging from 0 to 4294967295 is therefore added.
1.3.6.1.4.1.2011.5.25.172.2.2.1.22Unsigned32read-onlycurrent
hwVpnCfgPingConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.2.3
hwVpnCfgPingGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.2.3.1
hwVpnCfgPingCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.172.2.3.2
hwVpnCfgPingResultIRtTable
OBJECT-TYPE
hwVpnCfgPingResultIRtTable.
1.3.6.1.4.1.2011.5.25.172.2.4not-accessiblecurrent
hwVpnCfgPingResultIRtEntry
OBJECT-TYPE
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
1.3.6.1.4.1.2011.5.25.172.2.4.1not-accessiblecurrent
hwVpnCfgPingResultIRtIndex
OBJECT-TYPE
This object indicates the index of an import vpn target.
1.3.6.1.4.1.2011.5.25.172.2.4.1.1Integer32not-accessiblecurrent
hwVpnCfgPingResultIRt
OBJECT-TYPE
This object indicates the import vpn target.
1.3.6.1.4.1.2011.5.25.172.2.4.1.2OCTET STRINGread-onlycurrent
hwVpnCfgPingResultERtTable
OBJECT-TYPE
hwVpnCfgPingResultERtTable.
1.3.6.1.4.1.2011.5.25.172.2.5not-accessiblecurrent
hwVpnCfgPingResultERtEntry
OBJECT-TYPE
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
1.3.6.1.4.1.2011.5.25.172.2.5.1not-accessiblecurrent
hwVpnCfgPingResultERtIndex
OBJECT-TYPE
This object indicates the index of an export vpn target..
1.3.6.1.4.1.2011.5.25.172.2.5.1.1Integer32not-accessiblecurrent
hwVpnCfgPingResultERt
OBJECT-TYPE
This object indicates the export vpn target.
1.3.6.1.4.1.2011.5.25.172.2.5.1.2OCTET STRINGread-onlycurrent

Conformance

NameOIDStatus
hwPopuBaseGroup
OBJECT-GROUP
hwPopuBaseGroup.
1.3.6.1.4.1.2011.5.25.172.1.5.1.1current
hwOamMacOperGroup
OBJECT-GROUP
A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method.
1.3.6.1.4.1.2011.5.25.172.1.5.1.2current
hwOamMacListGroup
OBJECT-GROUP
A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method.
1.3.6.1.4.1.2011.5.25.172.1.5.1.3current
hwOamMacDisplayGroup
OBJECT-GROUP
A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method.
1.3.6.1.4.1.2011.5.25.172.1.5.1.4current
macoperCompliance
MODULE-COMPLIANCE
Description.
1.3.6.1.4.1.2011.5.25.172.1.5.2.1current
hwVpnCfgPingGroup
OBJECT-GROUP
hwVpnCfgPingGroup.
1.3.6.1.4.1.2011.5.25.172.2.3.1.1current
hwVpnCfgPingResultGroup
OBJECT-GROUP
hwVpnCfgPingResultGroup.
1.3.6.1.4.1.2011.5.25.172.2.3.1.2current
hwVpnCfgPingResultIRtGroup
OBJECT-GROUP
hwVpnCfgPingResultIRtGroup.
1.3.6.1.4.1.2011.5.25.172.2.3.1.3current
hwVpnCfgPingResultERtGroup
OBJECT-GROUP
hwVpnCfgPingResultERtGroup.
1.3.6.1.4.1.2011.5.25.172.2.3.1.4current
hwVpnCfgPingCompliance
MODULE-COMPLIANCE
Description.
1.3.6.1.4.1.2011.5.25.172.2.3.2.1current