MIBs Depot

HUAWEI-VO-ANALOG-IF-MIB

Registered at
1.3.6.1.4.1.2011.5.25.1.3
Last updated
2004-10-20 00:00
Organization
Huawei-3COM Technologies Co., Ltd.
Revisions
2004-04-08 13:45
Namespace
huawei
Source file
HUAWEI-VO-ANALOG-IF-MIB
Digest
sha256:acd168242433054f4229a18978f186c498df09b4df0d89873623f0a017f18ada

Contact

PLAT Team Huawei 3Com Technologies co.,Ltd. Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei-3com.com Zip:100085

Imports

FromSymbols
HUAWEI-3COM-OID-MIBvoice
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HUAWEI-3COM-OID-MIB
HUAWEI-VO-ANALOG-IF-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hwVoAnalogIfCommonObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.1.3.1
hwVoAnalogIfCommonConfigTable
OBJECT-TYPE
The voice analog interface common configuration table contains information about configuration parameters for analog voice interface.
1.3.6.1.4.1.2011.5.25.1.3.1.1not-accessiblecurrent
hwVoAnalogIfCommonConfigEntry
OBJECT-TYPE
An entry in the voice analog interface common configuration table. The entry is automatically created when a analog voice interface hardware is found.
1.3.6.1.4.1.2011.5.25.1.3.1.1.1not-accessiblecurrent
hwVoAnalogIfConfigPortNumber
OBJECT-TYPE
Index of voice analog interface common config table. It identify the number of the voice port.
1.3.6.1.4.1.2011.5.25.1.3.1.1.1.1INTEGERread-onlycurrent
hwVoAnalogIfConfigPortType
OBJECT-TYPE
This object expresses the type of the voice analog interfaces. fxs : the type of the voice port is FXS. fxo : the type of the voice port is FXO. em : the type of the voice port is E&M.
1.3.6.1.4.1.2011.5.25.1.3.1.1.1.2INTEGER {fxs(1), fxo(2), em(3)}read-onlycurrent
hwVoAnaloglfConfigPortImpedance
OBJECT-TYPE
This object expresses the port impedance of voice analog interfaces. impedance600Real : 600 Ohms This impedance is primarily used by FXS. impedanceComplex : 200 Ohms + 680 Ohms || 100nF This impedance is primarily used by FX0 and E&M.
1.3.6.1.4.1.2011.5.25.1.3.1.1.1.3INTEGER {impedance600Real(1), impedanceComplex(2)}read-onlycurrent
hwVoAnalogIfConfigInitialDigitTimeOut
OBJECT-TYPE
This object states the longgest time to wait the first input digit from caller side. The default value is 10 seconds.
1.3.6.1.4.1.2011.5.25.1.3.1.1.1.4INTEGER (0..300)read-writecurrent
hwVoAnalogIfConfigInterDigitTimeOut
OBJECT-TYPE
This object states the longest time to wait between two input digit from caller side. The default value is 10 seconds.
1.3.6.1.4.1.2011.5.25.1.3.1.1.1.5INTEGER (0..300)read-writecurrent
hwVoAnalogIfConfigCallDisconnect
OBJECT-TYPE
This object states the time the system waits for the caller side to hang up after the connect is disable. The default value is 10 seconds.
1.3.6.1.4.1.2011.5.25.1.3.1.1.1.6INTEGER (0..120)read-onlycurrent
hwVoAnalogIfFXSObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.1.3.2
hwVoAnalogIfFXSConfigTable
OBJECT-TYPE
The voice analog interface fxs configuration table contains information about configuration parameters for analog fxs voice interface.
1.3.6.1.4.1.2011.5.25.1.3.2.1not-accessiblecurrent
hwVoAnalogIfFXSConfigEntry
OBJECT-TYPE
An entry in the voice analog interface fxs configuration table. The entry is automatically created when a analog fxs voice interface hardware is found.
1.3.6.1.4.1.2011.5.25.1.3.2.1.1not-accessiblecurrent
hwVoAnalogIfFXSConfigPortNumber
OBJECT-TYPE
Index of voice analog interface fxs config table. It identify the number of the fxs voice port.
1.3.6.1.4.1.2011.5.25.1.3.2.1.1.1INTEGERread-onlycurrent
hwVoAnalogIfFXSConfigStartMode
OBJECT-TYPE
This object expresses the signaling type of analog fxs interface. The default value is loopStart.
1.3.6.1.4.1.2011.5.25.1.3.2.1.1.2INTEGER {loopStart(1), groundStart(2)}read-onlycurrent
hwVoAnalogIfFXSTimerTable
OBJECT-TYPE
The voice analog interface fxs timer table contains information about timer parameters for analog fxs voice interface.
1.3.6.1.4.1.2011.5.25.1.3.2.3not-accessiblecurrent
hwVoAnalogIfFXSTimerEntry
OBJECT-TYPE
An entry in the voice analog interface fxs configuration table. The entry is automatically created when a analog fxs voice interface hardware is found.
1.3.6.1.4.1.2011.5.25.1.3.2.3.1not-accessiblecurrent
hwVoAnalogIfFXSTimerPortNumber
OBJECT-TYPE
Index of voice analog interface fxs timer table. It identify the number of the fxs voice port.
1.3.6.1.4.1.2011.5.25.1.3.2.3.1.1INTEGERread-onlycurrent
hwVoAnalogIfFXSTimerDtmf
OBJECT-TYPE
This object expresses outgoing dtmf digit duration of the analog fxs interface. The default value is 120 milliseconds
1.3.6.1.4.1.2011.5.25.1.3.2.3.1.2INTEGER (50..500)read-onlycurrent
hwVoAnalogIfFXSTimerDtmfInterval
OBJECT-TYPE
This object expresses outgoing dtmf interval duration of the analog fxs interface. The default value is 120 milliseconds
1.3.6.1.4.1.2011.5.25.1.3.2.3.1.3INTEGER (50..500)read-onlycurrent
hwVoAnalogIfFXOObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.1.3.3
hwVoAnalogIfFXOConfigTable
OBJECT-TYPE
The voice analog interface fxo configuration table contains information about configuration parameters for analog fxo voice interface.
1.3.6.1.4.1.2011.5.25.1.3.3.1not-accessiblecurrent
hwVoAnalogIfFXOConfigEntry
OBJECT-TYPE
An entry in the voice analog interface fxo configuration table. The entry is automatically created when a analog fxo voice interface hardware is found.
1.3.6.1.4.1.2011.5.25.1.3.3.1.1not-accessiblecurrent
hwVoAnalogIfFXOConfigPortNumber
OBJECT-TYPE
Index of voice analog interface fxo config table. It identify the number of the fxo voice port.
1.3.6.1.4.1.2011.5.25.1.3.3.1.1.1INTEGERread-onlycurrent
hwVoAnalogIfFXOConfigStartMode
OBJECT-TYPE
This object expresses the signal type of analog fxo interface. The default value is fxoLoopStart.
1.3.6.1.4.1.2011.5.25.1.3.3.1.1.2INTEGER {loopStart(1), groundStart(2)}read-onlycurrent
hwVoAnalogIfFXOConfigAlertNumber
OBJECT-TYPE
This object expresses the number of rings detected before loop being closed. The default value is 2.
1.3.6.1.4.1.2011.5.25.1.3.3.1.1.3INTEGERread-onlycurrent
hwVoAnalogIfFXOConfigArea
OBJECT-TYPE
This object expresses the busy tone of analog fxo interface. The default value is europe.
1.3.6.1.4.1.2011.5.25.1.3.3.1.1.4INTEGER {europe(1), custom(2), north-america(3)}read-writecurrent
hwVoAnalogIfFXOPreDialDelay
OBJECT-TYPE
This object expresses the pre-dial delay of analog fxo interface. The default value is 1 seconds.
1.3.6.1.4.1.2011.5.25.1.3.3.1.1.5INTEGER (0..10)read-writecurrent
hwVoAnaloglfFXOConfigPortImpedance
OBJECT-TYPE
This object expresses the port impedance of FXO interfaces.
1.3.6.1.4.1.2011.5.25.1.3.3.1.1.6INTEGER {impedance550r(0), impedance600r(1), impedance600c(2), impedancecomplex(3)}read-writecurrent
hwVoAnalogIfFXOTimerTable
OBJECT-TYPE
The voice analog interface fxo timer table contains information about timer parameters for analog fxo voice interface.
1.3.6.1.4.1.2011.5.25.1.3.3.3not-accessiblecurrent
hwVoAnalogIfFXOTimerEntry
OBJECT-TYPE
An entry in the voice analog interface fxo timer table. The entry is automatically created when a analog fxo voice interface hardware is found.
1.3.6.1.4.1.2011.5.25.1.3.3.3.1not-accessiblecurrent
hwVoAnalogIfFXOTimerPortNumber
OBJECT-TYPE
Index of voice analog interface fxo timer table. It identify the number of the fxo voice port.
1.3.6.1.4.1.2011.5.25.1.3.3.3.1.1INTEGERread-onlycurrent
hwVoAnalogIfFXOTimerDtmf
OBJECT-TYPE
This object expresses outgoing dtmf digit duration of the analog fxo interface. The default value is 120 milliseconds
1.3.6.1.4.1.2011.5.25.1.3.3.3.1.2INTEGER (50..500)read-writecurrent
hwVoAnalogIfFXOTimerDtmfInterval
OBJECT-TYPE
This object expresses outgoing dtmf interval duration of the analog fxo interface. The default value is 120 milliseconds
1.3.6.1.4.1.2011.5.25.1.3.3.3.1.3INTEGER (50..500)read-writecurrent
hwVoAnalogIfEMObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.1.3.4
hwVoAnalogIfEMConfigTable
OBJECT-TYPE
The voice analog interface e&m configuration table contains information about configuration parameters for analog e&m voice interface.
1.3.6.1.4.1.2011.5.25.1.3.4.1not-accessiblecurrent
hwVoAnalogIfEMConfigEntry
OBJECT-TYPE
An entry in the voice analog interface e&m configuration table. The entry is automatically created when a analog e&m voice interface hardware is found.
1.3.6.1.4.1.2011.5.25.1.3.4.1.1not-accessiblecurrent
hwVoAnalogIfEMConfigPortNumber
OBJECT-TYPE
Index of voice analog interface e&m config table. It identify the number of the e&m voice port.
1.3.6.1.4.1.2011.5.25.1.3.4.1.1.1INTEGERread-onlycurrent
hwVoAnalogIfEMConfigSignalMode
OBJECT-TYPE
This object expresses the signal mode of the analog e&m interfaces. The default value is immediateDial.
1.3.6.1.4.1.2011.5.25.1.3.4.1.1.2INTEGER {delayDial(1), immediateDial(2), winkStart(3)}read-writecurrent
hwVoAnalogIfEMConfigPhyParm
OBJECT-TYPE
This object expresses the operation of the analog e&m signal. The default value of this object is fourWiresOperation.
1.3.6.1.4.1.2011.5.25.1.3.4.1.1.3INTEGER {twoWiresOperation(1), fourWiresOperation(2)}read-writecurrent
hwVoAnalogIfEMConfigPhyType
OBJECT-TYPE
This object expresses the e&m lead signaling type of the analog e&m interface. The default is type5.
1.3.6.1.4.1.2011.5.25.1.3.4.1.1.4INTEGER {type1(1), type2(2), type3(3), type5(5)}read-writecurrent
hwVoAnalogIfEMConfigTimeoutRinging
OBJECT-TYPE
This object expresses the ring timeout of the analog e&m interface. The value of 65535 indicates the timer is approach infinity. The default value of this object is 60 seconds.
1.3.6.1.4.1.2011.5.25.1.3.4.1.1.5INTEGER (5..600 | 65535)read-writecurrent
hwVoAnalogIfEMConfigTimeoutWaitDigit
OBJECT-TYPE
This object expresses the wait digit timeout of the analog e&m interface. The value of 65535 indicates the timer is approach infinity. The default value of this object is 5 seconds.
1.3.6.1.4.1.2011.5.25.1.3.4.1.1.6INTEGER (3..600 | 65535)read-writecurrent
hwVoAnalogIfEMTimerTable
OBJECT-TYPE
The voice analog interface e&m timer table contains information about timer parameters for analog e&m voice interface.
1.3.6.1.4.1.2011.5.25.1.3.4.3not-accessiblecurrent
hwVoAnalogIfEMTimerEntry
OBJECT-TYPE
An entry in the voice analog interface e&m timer table. The entry is automatically created when a analog e&m voice interface hardware is found.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1not-accessiblecurrent
hwVoAnalogIfEMTimerPortNumber
OBJECT-TYPE
Index of voice analog interface e&m timer table. It identify the number of the e&m voice port.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.1INTEGERread-onlycurrent
hwVoAnalogIfEMTimerDtmf
OBJECT-TYPE
This object expresses outgoing dtmf digit duration of the analog e&m interface. The default value is 120 milliseconds
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.2INTEGER (50..500)read-writecurrent
hwVoAnalogIfEMTimerDtmfInterval
OBJECT-TYPE
This object expresses outgoing dtmf interval duration of the analog e&m interface. The default value is 120 milliseconds
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.3INTEGER (50..500)read-writecurrent
hwVoAnalogIfEMTimerCallInterval
OBJECT-TYPE
This object expresses the dureation of call clearing. The default value is 200 milliseconds.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.4INTEGER (200..2000)read-writecurrent
hwVoAnalogIfEMTimerSendWink
OBJECT-TYPE
This object expresses the max time between receiving seizure signal and sending wink signal. This object can olny be used when hwVoAnalogIfEMConfigSignalMode is 'winkStart'. The default value is 500 milliseconds.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.5INTEGER (100..5000)read-writecurrent
hwVoAnalogIfEMTimerWinkRising
OBJECT-TYPE
This object expresses the max time between sending seizure signal and receiving wink signal. This object can only be used when hwVoAnalogIfEMConfigSignalMode is 'winkStart'. The default value is 2000 milliseconds.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.6INTEGER (100..5000)read-writecurrent
hwVoAnalogIfEMTimerWinkHold
OBJECT-TYPE
This object expresses the max duration for sending wink signal. This object can only be used when hwVoAnalogIfEMConfigSignalMode is 'winkStart'. The default value is 500 milliseconds.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.7INTEGER (100..3000)read-writecurrent
hwVoAnalogIfEMTimerDialoutDelay
OBJECT-TYPE
This object expresses max time sending called digits. This object can only be used when hwVoAnalogIfEMConfigSignalMode is 'immediate'. The default value is 300 milliseconds.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.8INTEGER (50..5000)read-writecurrent
hwVoAnalogIfEMTimerRising
OBJECT-TYPE
This object expresses the wait duration between receiveing seizure signal and sending delay signal. This object can only be used when hwVoAnalogIfEMConfigSignalMode is 'delayDial'. The default value is 300 milliseconds.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.9INTEGER (20..2000)read-writecurrent
hwVoAnalogIfEMTimerHold
OBJECT-TYPE
This object expresses the max time sending delay signal. This object can only be used when hwVoAnalogIfEMConfigSignalMode is 'delayDial'. The default value is 400 milliseconds.
1.3.6.1.4.1.2011.5.25.1.3.4.3.1.10INTEGER (100..5000)read-writecurrent