MIBs Depot

HUAWEI-TUNNEL-TE-MIB

Registered at
1.3.6.1.4.1.2011.5.25.151
Last updated
2017-08-17 16:07
Organization
Huawei Technologies Co.,Ltd.
Revisions
2017-08-17 16:07, 2017-08-02 20:38, 2013-08-28 17:26, 2006-06-30 15:54
Namespace
huawei
Source file
HUAWEI-TUNNEL-TE-MIB
Digest
sha256:3d52b4329b6f8c31bf1699f37cc0d1e0aaefc94bc44e78e85502078dfb4b5de8

Description

This MIB contains private managed object definitions for the binding information.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-MIBhwDatacomm
IF-MIBInterfaceIndex
MPLS-LSR-STD-MIBMplsIndexType
MPLS-TC-STD-MIBMplsExtendedTunnelId, MplsTunnelIndex, MplsTunnelInstanceIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBITS, Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HUAWEI-MIB
HUAWEI-TUNNEL-TE-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
MPLS-LSR-STD-MIB
MPLS-TC-STD-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hwTunnelTeMibObject
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.151.1
hwTunnelDiffServTable
OBJECT-TYPE
The table describes the different service mode of tunnel.
1.3.6.1.4.1.2011.5.25.151.1.1not-accessiblecurrent
hwTunnelDiffServEntry
OBJECT-TYPE
Interface different service mode attribute configuration.
1.3.6.1.4.1.2011.5.25.151.1.1.1not-accessiblecurrent
hwTunnelDiffServIndex
OBJECT-TYPE
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the Tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
1.3.6.1.4.1.2011.5.25.151.1.1.1.1InterfaceIndexnot-accessiblecurrent
hwTunnelDiffServMode
OBJECT-TYPE
Different service mode of TE interface, default is uniform.
1.3.6.1.4.1.2011.5.25.151.1.1.1.2INTEGER {pipe(1), uniform(2)}read-onlycurrent
hwTunnelDiffServServiceClass
OBJECT-TYPE
PHB in the ingress PE, the value must be be,af1,af2,af3,af4,ef,cs6,cs7.The default class is invalidClass(255).
1.3.6.1.4.1.2011.5.25.151.1.1.1.3INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8), invalidClass(255)}read-onlycurrent
hwTunnelDiffServColor
OBJECT-TYPE
Remarked color of packet in the ingress PE, the value must be green,yellow,red.The default color is invalidColor(255).
1.3.6.1.4.1.2011.5.25.151.1.1.1.4INTEGER {green(1), yellow(2), red(3), invalidColor(255)}read-onlycurrent
hwTunnelTeFlowQueue
OBJECT-TYPE
Name of flow-queue template.
1.3.6.1.4.1.2011.5.25.151.1.1.1.5OCTET STRING (SIZE(0..31))read-onlycurrent
hwTunnelTeVsiTable
OBJECT-TYPE
The table describes the VPN binding of Tunnel.
1.3.6.1.4.1.2011.5.25.151.1.2not-accessibleobsolete
hwTunnelTeVsiEntry
OBJECT-TYPE
The L2VPN VSI binding configuration of tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.2.1not-accessibleobsolete
hwTunnelTeVsiIndex
OBJECT-TYPE
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
1.3.6.1.4.1.2011.5.25.151.1.2.1.1InterfaceIndexnot-accessibleobsolete
hwTunnelTeVsiName
OBJECT-TYPE
The name of VSI that the TE interface bind.
1.3.6.1.4.1.2011.5.25.151.1.2.1.2OCTET STRING (SIZE(0..47))not-accessibleobsolete
hwTunnelTeVsiCir
OBJECT-TYPE
The Committed Information Rate of the VSI.
1.3.6.1.4.1.2011.5.25.151.1.2.1.3Integer32 (100..10000000)read-onlyobsolete
hwTunnelTeVsiPir
OBJECT-TYPE
The Peak Information Rate of the VSI.
1.3.6.1.4.1.2011.5.25.151.1.2.1.4Integer32 (100..10000000)read-onlyobsolete
hwTunnelTeVsiFlowQueue
OBJECT-TYPE
Name of flow-queue template.
1.3.6.1.4.1.2011.5.25.151.1.2.1.5OCTET STRING (SIZE(0..31))read-onlyobsolete
hwTunnelTeVllTable
OBJECT-TYPE
The table describes the VLL binding of tunnel.
1.3.6.1.4.1.2011.5.25.151.1.3not-accessibleobsolete
hwTunnelTeVllEntry
OBJECT-TYPE
The VLL binding configuration of tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.3.1not-accessibleobsolete
hwTunnelTeVllIndex
OBJECT-TYPE
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
1.3.6.1.4.1.2011.5.25.151.1.3.1.1InterfaceIndexnot-accessibleobsolete
hwTunnelTeVllInterfaceName
OBJECT-TYPE
The interface name of VLL binding.
1.3.6.1.4.1.2011.5.25.151.1.3.1.2OCTET STRING (SIZE(0..47))not-accessibleobsolete
hwTunnelTeVllCir
OBJECT-TYPE
The Committed Information Rate of the VLL.
1.3.6.1.4.1.2011.5.25.151.1.3.1.3Integer32 (100..10000000)read-onlyobsolete
hwTunnelTeVllPir
OBJECT-TYPE
The Peak Information Rate of the VLL.
1.3.6.1.4.1.2011.5.25.151.1.3.1.4Integer32 (100..10000000)read-onlyobsolete
hwTunnelTeVllFlowQueue
OBJECT-TYPE
Name of flow-queue template.
1.3.6.1.4.1.2011.5.25.151.1.3.1.5OCTET STRING (SIZE(0..31))read-onlyobsolete
hwTunnelTeL3vpnTable
OBJECT-TYPE
The table describes the L3VPN binding of tunnel.
1.3.6.1.4.1.2011.5.25.151.1.4not-accessibleobsolete
hwTunnelTeL3vpnEntry
OBJECT-TYPE
The L3VPN binding configuration of tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.4.1not-accessibleobsolete
hwTunnelTeL3vpnIndex
OBJECT-TYPE
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
1.3.6.1.4.1.2011.5.25.151.1.4.1.1InterfaceIndexnot-accessibleobsolete
hwTunnelTeL3vpnName
OBJECT-TYPE
The name of VPN instance that the TE interface bind.
1.3.6.1.4.1.2011.5.25.151.1.4.1.2OCTET STRING (SIZE(0..47))not-accessibleobsolete
hwTunnelTeL3vpnCir
OBJECT-TYPE
The Committed Information Rate of the L3VPN.
1.3.6.1.4.1.2011.5.25.151.1.4.1.3Integer32 (100..10000000)read-onlyobsolete
hwTunnelTeL3vpnPir
OBJECT-TYPE
The Peak Information Rate of the L3VPN.
1.3.6.1.4.1.2011.5.25.151.1.4.1.4Integer32 (100..10000000)read-onlyobsolete
hwTunnelTeL3vpnFlowQueue
OBJECT-TYPE
Name of flow-queue template.
1.3.6.1.4.1.2011.5.25.151.1.4.1.5OCTET STRING (SIZE(0..31))read-onlyobsolete
hwTunnelTeStatisticsTable
OBJECT-TYPE
The table describes the up/down state transition counts of the TE tunnel interface. It also describes timestamps when an interface is hot swapped and a primary/backup tunnel switchover is performed.
1.3.6.1.4.1.2011.5.25.151.1.5not-accessiblecurrent
hwTunnelTeStatisticsEntry
OBJECT-TYPE
The up/down state transition counts of TE tunnel interface. The index of the table is hwTunnelTeStatisticsIfIndex.
1.3.6.1.4.1.2011.5.25.151.1.5.1not-accessiblecurrent
hwTunnelTeStatisticsIfIndex
OBJECT-TYPE
This object identifies the index of a TE tunnel. The value is an unsigned 32-bit integer.
1.3.6.1.4.1.2011.5.25.151.1.5.1.1InterfaceIndexnot-accessiblecurrent
hwTunnelTeUpDownStatistics
OBJECT-TYPE
Describes the up/down transition counts of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.5.1.2Unsigned32read-onlycurrent
hwTunnTeCounterDiscontinuityTime
OBJECT-TYPE
The value of sysUpTime on the most recent occasion at which this interface's up/down transition counters suffered a discontinuity.
1.3.6.1.4.1.2011.5.25.151.1.5.1.3TimeStampread-onlycurrent
hwCtTemplateTable
OBJECT-TYPE
The table describes the CT template configuration on the device.
1.3.6.1.4.1.2011.5.25.151.1.6not-accessiblecurrent
hwCtTemplateEntry
OBJECT-TYPE
The CT template configuration on the device. The index of the table is hwCtTemplateIndex.
1.3.6.1.4.1.2011.5.25.151.1.6.1not-accessiblecurrent
hwCtTemplateIndex
OBJECT-TYPE
It uniquely identifies a set of CT templates. Managers should obtain new values for row creation in this table by reading hwCtTemplateIndex.
1.3.6.1.4.1.2011.5.25.151.1.6.1.1Integer32 (1..4096)not-accessiblecurrent
hwCtTemplateName
OBJECT-TYPE
The CT template name.
1.3.6.1.4.1.2011.5.25.151.1.6.1.2OCTET STRING (SIZE(1..19))read-createcurrent
hwCtTemplateCt0
OBJECT-TYPE
The CT0 bandwidth of the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.3Unsigned32read-createcurrent
hwCtTemplateCt1
OBJECT-TYPE
The CT1 bandwidth of the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.4Unsigned32 (0..32000000)read-createcurrent
hwCtTemplateCt2
OBJECT-TYPE
The CT2 bandwidth of the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.5Unsigned32 (0..32000000)read-createcurrent
hwCtTemplateCt3
OBJECT-TYPE
The CT3 bandwidth of the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.6Unsigned32 (0..32000000)read-createcurrent
hwCtTemplateCt4
OBJECT-TYPE
The CT4 bandwidth of the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.7Unsigned32 (0..32000000)read-createcurrent
hwCtTemplateCt5
OBJECT-TYPE
The CT5 bandwidth of the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.8Unsigned32 (0..32000000)read-createcurrent
hwCtTemplateCt6
OBJECT-TYPE
The CT6 bandwidth of the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.9Unsigned32 (0..32000000)read-createcurrent
hwCtTemplateCt7
OBJECT-TYPE
The CT7 bandwidth of the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.10Unsigned32 (0..32000000)read-createcurrent
hwCtTemplateCommit
OBJECT-TYPE
The commit flag of the CT template,1 indicates commit,0 indicates not commit.
1.3.6.1.4.1.2011.5.25.151.1.6.1.11INTEGER {notCommit(1), commit(2)}read-createcurrent
hwCtTemplateRowStatus
OBJECT-TYPE
This object is used to create and delete rows in the CT template.
1.3.6.1.4.1.2011.5.25.151.1.6.1.12RowStatusread-createcurrent
hwCtConfigTunnelCtTable
OBJECT-TYPE
The table describes the CT configuration in the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7not-accessiblecurrent
hwCtConfigTunnelCtEntry
OBJECT-TYPE
The table describes the CT configuration in the TE tunnel interface. The index of the table is hwCtConfigTunnelCtIfIndex.
1.3.6.1.4.1.2011.5.25.151.1.7.1not-accessiblecurrent
hwCtConfigTunnelCtIfIndex
OBJECT-TYPE
Uniquely identifies a set of tunnels between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
1.3.6.1.4.1.2011.5.25.151.1.7.1.1InterfaceIndexnot-accessiblecurrent
hwCtConfigTunnelName
OBJECT-TYPE
The name of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.2OCTET STRING (SIZE(0..64))read-onlycurrent
hwCtConfigTunnelCommit
OBJECT-TYPE
The commit flag of the TE tunnel interface,1 indicates commit,0 indicates not commit.
1.3.6.1.4.1.2011.5.25.151.1.7.1.3INTEGER {notCommit(1), commit(2)}read-onlycurrent
hwCtConfigTemplateName
OBJECT-TYPE
The CT template name.
1.3.6.1.4.1.2011.5.25.151.1.7.1.4OCTET STRING (SIZE(1..19))read-onlycurrent
hwCtConfigTunnelCt0Band
OBJECT-TYPE
The CT0 bandwidth value of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.5Unsigned32 (0..32000000)read-onlycurrent
hwCtConfigTunnelCt1Band
OBJECT-TYPE
The CT1 bandwidth value of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.6Unsigned32 (0..32000000)read-onlycurrent
hwCtConfigTunnelCt2Band
OBJECT-TYPE
The CT2 bandwidth value of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.7Unsigned32 (0..32000000)read-onlycurrent
hwCtConfigTunnelCt3Band
OBJECT-TYPE
The CT3 bandwidth value of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.8Unsigned32 (0..32000000)read-onlycurrent
hwCtConfigTunnelCt4Band
OBJECT-TYPE
The CT4 bandwidth value of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.9Unsigned32 (0..32000000)read-onlycurrent
hwCtConfigTunnelCt5Band
OBJECT-TYPE
The CT5 bandwidth value of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.10Unsigned32 (0..32000000)read-onlycurrent
hwCtConfigTunnelCt6Band
OBJECT-TYPE
The CT6 bandwidth value of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.11Unsigned32 (0..32000000)read-onlycurrent
hwCtConfigTunnelCt7Band
OBJECT-TYPE
The CT7 bandwidth value of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.7.1.12Unsigned32 (0..32000000)read-onlycurrent
hwCtStatisticsTable
OBJECT-TYPE
The table describes flow statistics of the TE tunnel interface VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8not-accessiblecurrent
hwCtStatisticsEntry
OBJECT-TYPE
The table describes the statistics in the TE tunnel interface with CT configuration. The index of the table is hwCtStatisticsIfIndex.
1.3.6.1.4.1.2011.5.25.151.1.8.1not-accessiblecurrent
hwCtStatisticsIfIndex
OBJECT-TYPE
Uniquely identifies a set of tunnels between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
1.3.6.1.4.1.2011.5.25.151.1.8.1.1InterfaceIndexnot-accessiblecurrent
hwCtStatisticsTunnelName
OBJECT-TYPE
The name of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.1.8.1.2OCTET STRING (SIZE(0..64))read-onlycurrent
hwCtStatisticsCt0OutByteRate
OBJECT-TYPE
It counts the rate in bytes/sec out from the CT0 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.3Counter64read-onlycurrent
hwCtStatisticsCt0OutPktRate
OBJECT-TYPE
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.4Counter64read-onlycurrent
hwCtStatisticsCt0OutPkt
OBJECT-TYPE
It counts the out packets from the CT0 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.5Counter64read-onlycurrent
hwCtStatisticsCt0OutPktByte
OBJECT-TYPE
It counts the out bytes from the CT0 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.6Counter64read-onlycurrent
hwCtStatisticsCt0OutErrorPkt
OBJECT-TYPE
It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.7Counter64read-onlycurrent
hwCtStatisticsCt1OutByteRate
OBJECT-TYPE
It counts the rate in bytes/sec out from CT1 the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.8Counter64read-onlycurrent
hwCtStatisticsCt1OutPktRate
OBJECT-TYPE
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.9Counter64read-onlycurrent
hwCtStatisticsCt1OutPkt
OBJECT-TYPE
It counts the out packets from the CT1 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.10Counter64read-onlycurrent
hwCtStatisticsCt1OutPktByte
OBJECT-TYPE
It counts the out packet bytes from the CT1 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.11Counter64read-onlycurrent
hwCtStatisticsCt1OutErrorPkt
OBJECT-TYPE
It counts the error packets from the CT1 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.12Counter64read-onlycurrent
hwCtStatisticsCt2OutByteRate
OBJECT-TYPE
It counts the rate in bytes/sec out from the CT2 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.13Counter64read-onlycurrent
hwCtStatisticsCt2OutPktRate
OBJECT-TYPE
It counts the rate in packets/sec out from the CT2 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.14Counter64read-onlycurrent
hwCtStatisticsCt2OutPkt
OBJECT-TYPE
It counts the out packets from the CT2 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.15Counter64read-onlycurrent
hwCtStatisticsCt2OutPktByte
OBJECT-TYPE
It counts the out packet bytes from the CT2 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.16Counter64read-onlycurrent
hwCtStatisticsCt2OutErrorPkt
OBJECT-TYPE
It counts the error packets from the CT2 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.17Counter64read-onlycurrent
hwCtStatisticsCt3OutByteRate
OBJECT-TYPE
The CT3 out in bytes/sec out of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.18Counter64read-onlycurrent
hwCtStatisticsCt3OutPktRate
OBJECT-TYPE
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.19Counter64read-onlycurrent
hwCtStatisticsCt3OutPkt
OBJECT-TYPE
It counts the out packets from the CT3 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.20Counter64read-onlycurrent
hwCtStatisticsCt3OutPktByte
OBJECT-TYPE
It counts the out packet bytes from the CT3 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.21Counter64read-onlycurrent
hwCtStatisticsCt3OutErrorPkt
OBJECT-TYPE
It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.22Counter64read-onlycurrent
hwCtStatisticsCt4OutByteRate
OBJECT-TYPE
The CT4 out in bytes/sec out of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.23Counter64read-onlycurrent
hwCtStatisticsCt4OutPktRate
OBJECT-TYPE
It counts the rate in packets/sec out from the CT4 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.24Counter64read-onlycurrent
hwCtStatisticsCt4OutPkt
OBJECT-TYPE
It counts the out packets from the CT4 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.25Counter64read-onlycurrent
hwCtStatisticsCt4OutPktByte
OBJECT-TYPE
It counts the out packet bytes from the CT4 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.26Counter64read-onlycurrent
hwCtStatisticsCt4OutErrorPkt
OBJECT-TYPE
It counts the error packets from the CT4 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.27Counter64read-onlycurrent
hwCtStatisticsCt5OutByteRate
OBJECT-TYPE
The CT5 out in bytes/sec out of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.28Counter64read-onlycurrent
hwCtStatisticsCt5OutPktRate
OBJECT-TYPE
It counts the rate in packets/sec out from the CT5 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.29Counter64read-onlycurrent
hwCtStatisticsCt5OutPkt
OBJECT-TYPE
It counts the out packets from the CT5 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.30Counter64read-onlycurrent
hwCtStatisticsCt5OutPktByte
OBJECT-TYPE
It counts the out packet bytes from the CT5 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.31Counter64read-onlycurrent
hwCtStatisticsCt5OutErrorPkt
OBJECT-TYPE
It counts the error packets from the CT5 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.32Counter64read-onlycurrent
hwCtStatisticsCt6OutByteRate
OBJECT-TYPE
The CT6 out in bytes/sec out of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.33Counter64read-onlycurrent
hwCtStatisticsCt6OutPktRate
OBJECT-TYPE
It counts the rate in packets/sec out from the CT6 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.34Counter64read-onlycurrent
hwCtStatisticsCt6OutPkt
OBJECT-TYPE
It counts the out packets from the CT6 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.35Counter64read-onlycurrent
hwCtStatisticsCt6OutPktByte
OBJECT-TYPE
It counts the out packet bytes from the CT6 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.36Counter64read-onlycurrent
hwCtStatisticsCt6OutErrorPkt
OBJECT-TYPE
It counts the error packets from the CT6 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.37Counter64read-onlycurrent
hwCtStatisticsCt7OutByteRate
OBJECT-TYPE
The CT7 out in bytes/sec out of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.38Counter64read-onlycurrent
hwCtStatisticsCt7OutPktRate
OBJECT-TYPE
It counts the rate in packets/sec out from the CT7 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.39Counter64read-onlycurrent
hwCtStatisticsCt7OutPkt
OBJECT-TYPE
It counts the out packets from the CT7 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.40Counter64read-onlycurrent
hwCtStatisticsCt7OutPktByte
OBJECT-TYPE
It counts the out packet bytes from the CT7 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.41Counter64read-onlycurrent
hwCtStatisticsCt7OutErrorPkt
OBJECT-TYPE
It counts the error packets from the CT7 of the TE tunnel interface with VPN configuration.
1.3.6.1.4.1.2011.5.25.151.1.8.1.42Counter64read-onlycurrent
hwCtFlowTemplateTable
OBJECT-TYPE
The table describes max 8 of the CT-FLOW-Mapping template configuration on the device.
1.3.6.1.4.1.2011.5.25.151.1.9not-accessiblecurrent
hwCtFlowTemplateEntry
OBJECT-TYPE
The table describes the CT-FLOW-Mapping template configuration on the device.
1.3.6.1.4.1.2011.5.25.151.1.9.1not-accessiblecurrent
hwCtFlowTemplateID
OBJECT-TYPE
The index of CT-FLOW templat.
1.3.6.1.4.1.2011.5.25.151.1.9.1.1Integer32 (1..8)not-accessiblecurrent
hwCtFlowTemplateName
OBJECT-TYPE
The name of CT-FLOW template.
1.3.6.1.4.1.2011.5.25.151.1.9.1.11OCTET STRING (SIZE(1..60))read-createcurrent
hwCt0Cos
OBJECT-TYPE
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
1.3.6.1.4.1.2011.5.25.151.1.9.1.12INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)}read-createcurrent
hwCt0Scheduler
OBJECT-TYPE
Scheduler name.
1.3.6.1.4.1.2011.5.25.151.1.9.1.13INTEGER {pq(1), wfq(2), lpq(3)}read-createcurrent
hwCt0Valid
OBJECT-TYPE
The state of CT-FLOW templat row.
1.3.6.1.4.1.2011.5.25.151.1.9.1.14INTEGER {valid(1), invalid(2)}read-createcurrent
hwCt1Cos
OBJECT-TYPE
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
1.3.6.1.4.1.2011.5.25.151.1.9.1.15INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)}read-createcurrent
hwCt1Scheduler
OBJECT-TYPE
Scheduler name.
1.3.6.1.4.1.2011.5.25.151.1.9.1.16INTEGER {pq(1), wfq(2), lpq(3)}read-createcurrent
hwCt1Valid
OBJECT-TYPE
The state of CT-FLOW templat row.
1.3.6.1.4.1.2011.5.25.151.1.9.1.17INTEGER {valid(1), invalid(2)}read-createcurrent
hwCt2Cos
OBJECT-TYPE
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
1.3.6.1.4.1.2011.5.25.151.1.9.1.18INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)}read-createcurrent
hwCt2Scheduler
OBJECT-TYPE
Scheduler name.
1.3.6.1.4.1.2011.5.25.151.1.9.1.19INTEGER {pq(1), wfq(2), lpq(3)}read-createcurrent
hwCt2Valid
OBJECT-TYPE
The state of CT-FLOW templat row.
1.3.6.1.4.1.2011.5.25.151.1.9.1.20INTEGER {valid(1), invalid(2)}read-createcurrent
hwCt3Cos
OBJECT-TYPE
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
1.3.6.1.4.1.2011.5.25.151.1.9.1.21INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)}read-createcurrent
hwCt3Scheduler
OBJECT-TYPE
Scheduler name.
1.3.6.1.4.1.2011.5.25.151.1.9.1.22INTEGER {pq(1), wfq(2), lpq(3)}read-createcurrent
hwCt3Valid
OBJECT-TYPE
The state of CT-FLOW templat row.
1.3.6.1.4.1.2011.5.25.151.1.9.1.23INTEGER {valid(1), invalid(2)}read-createcurrent
hwCt4Cos
OBJECT-TYPE
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
1.3.6.1.4.1.2011.5.25.151.1.9.1.24INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)}read-createcurrent
hwCt4Scheduler
OBJECT-TYPE
Scheduler name.
1.3.6.1.4.1.2011.5.25.151.1.9.1.25INTEGER {pq(1), wfq(2), lpq(3)}read-createcurrent
hwCt4Valid
OBJECT-TYPE
The state of CT-FLOW templat row.
1.3.6.1.4.1.2011.5.25.151.1.9.1.26INTEGER {valid(1), invalid(2)}read-createcurrent
hwCt5Cos
OBJECT-TYPE
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
1.3.6.1.4.1.2011.5.25.151.1.9.1.27INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)}read-createcurrent
hwCt5Scheduler
OBJECT-TYPE
Scheduler name.
1.3.6.1.4.1.2011.5.25.151.1.9.1.28INTEGER {pq(1), wfq(2), lpq(3)}read-createcurrent
hwCt5Valid
OBJECT-TYPE
The state of CT-FLOW templat row.
1.3.6.1.4.1.2011.5.25.151.1.9.1.29INTEGER {valid(1), invalid(2)}read-createcurrent
hwCt6Cos
OBJECT-TYPE
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
1.3.6.1.4.1.2011.5.25.151.1.9.1.30INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)}read-createcurrent
hwCt6Scheduler
OBJECT-TYPE
Scheduler name.
1.3.6.1.4.1.2011.5.25.151.1.9.1.31INTEGER {pq(1), wfq(2), lpq(3)}read-createcurrent
hwCt6Valid
OBJECT-TYPE
The state of CT-FLOW templat row.
1.3.6.1.4.1.2011.5.25.151.1.9.1.32INTEGER {valid(1), invalid(2)}read-createcurrent
hwCt7Cos
OBJECT-TYPE
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
1.3.6.1.4.1.2011.5.25.151.1.9.1.33INTEGER {be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)}read-createcurrent
hwCt7Scheduler
OBJECT-TYPE
Scheduler name.
1.3.6.1.4.1.2011.5.25.151.1.9.1.34INTEGER {pq(1), wfq(2), lpq(3)}read-createcurrent
hwCt7Valid
OBJECT-TYPE
The state of CT-FLOW templat row.
1.3.6.1.4.1.2011.5.25.151.1.9.1.35INTEGER {valid(1), invalid(2)}read-createcurrent
hwCtFlowTemplateCommit
OBJECT-TYPE
The state of CT-FLOW templat commit.
1.3.6.1.4.1.2011.5.25.151.1.9.1.36INTEGER {commit(1), nocommit(2)}read-createcurrent
hwCtFlowTemplateRowStatus
OBJECT-TYPE
The state of CT-FLOW templat.
1.3.6.1.4.1.2011.5.25.151.1.9.1.51RowStatusread-createcurrent
hwDsteInterfaceCfgTable
OBJECT-TYPE
The DS-TE configuration at interface.
1.3.6.1.4.1.2011.5.25.151.1.10not-accessiblecurrent
hwDsteInterfaceCfgEntry
OBJECT-TYPE
The DS-TE configuration at interface.
1.3.6.1.4.1.2011.5.25.151.1.10.1not-accessiblecurrent
hwDsteIfIndex
OBJECT-TYPE
A unique value, greater than zero, for eachinterface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
1.3.6.1.4.1.2011.5.25.151.1.10.1.1InterfaceIndexnot-accessiblecurrent
hwAppliedCtFlowTemplateName
OBJECT-TYPE
The name of CT-FLOW template.
1.3.6.1.4.1.2011.5.25.151.1.10.1.11OCTET STRING (SIZE(1..60))read-createcurrent
hwCtBandWidthShareCfg
OBJECT-TYPE
The Value of Ct BandWidth configuration for DS-TE. That must be in 'Share,UnShare'.
1.3.6.1.4.1.2011.5.25.151.1.10.1.12INTEGER {share(1), unshare(2)}read-createcurrent
hwTunnelDsTeTrap
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.151.2
hwTunnelTeConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.151.3
hwTunnelTeCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.151.3.1
hwTunnelTeGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.151.3.3

Notifications

NameOIDStatus
hwMplsFqShortage
NOTIFICATION-TYPE
This notification is generated when FQ (flow-queue) template resources are shortage.
1.3.6.1.4.1.2011.5.25.151.2.1obsolete
hwMplsSqShortage
NOTIFICATION-TYPE
This notification is generated when SQ (subscriber-queue) resources are shortage.
1.3.6.1.4.1.2011.5.25.151.2.2obsolete
hwMplsSqBandwidthExceed
NOTIFICATION-TYPE
This notification is generated when the total bandwidth of SQ (subscriber-queue) exceeds 10G bit/s in one LPU.
1.3.6.1.4.1.2011.5.25.151.2.3obsolete
hwMplsHsbFqShortage
NOTIFICATION-TYPE
This notification is generated when FQ (flow-queue) template resources in HSB are shortage.
1.3.6.1.4.1.2011.5.25.151.2.4obsolete
hwMplsHsbSqShortage
NOTIFICATION-TYPE
This notification is generated when SQ (subscriber-queue) resources in HSB are shortage.
1.3.6.1.4.1.2011.5.25.151.2.5obsolete
hwMplsHsbSqBandwidthExceed
NOTIFICATION-TYPE
This notification is generated when the total bandwidth of SQ (subscriber-queue) in HSB exceeds 10G bit/s in one LPU.
1.3.6.1.4.1.2011.5.25.151.2.6obsolete

Conformance

NameOIDStatus
hwTunnelTeCompliance
MODULE-COMPLIANCE
The compliance statement for HUAWEI-TUNNEL-TE-MIB.
1.3.6.1.4.1.2011.5.25.151.3.1.1current
hwTunnelDiffServGroup
OBJECT-GROUP
Describes the different service mode of tunnel.
1.3.6.1.4.1.2011.5.25.151.3.3.1current
hwTunnelTeVsiGroup
OBJECT-GROUP
Describes the VSI binding of tunnel.
1.3.6.1.4.1.2011.5.25.151.3.3.2current
hwTunnelTeVllGroup
OBJECT-GROUP
Describes the VLL binding of tunnel.
1.3.6.1.4.1.2011.5.25.151.3.3.3current
hwTunnelTeL3vpnGroup
OBJECT-GROUP
Describes the L3VPN binding of tunnel.
1.3.6.1.4.1.2011.5.25.151.3.3.4current
hwTunnelTeStatisticsGroup
OBJECT-GROUP
Describes the up/down count of the TE tunnel.
1.3.6.1.4.1.2011.5.25.151.3.3.5current
hwCtTemplateGroup
OBJECT-GROUP
Describes CT template.
1.3.6.1.4.1.2011.5.25.151.3.3.6current
hwCtConfigCtGroup
OBJECT-GROUP
Describes the CT configuration of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.3.3.7current
hwCtStatisticsGroup
OBJECT-GROUP
Describes the CT of the TE tunnel interface.
1.3.6.1.4.1.2011.5.25.151.3.3.8current
hwTunnelTeTrapGroup
NOTIFICATION-GROUP
The HUAWEI Tunnel Te trap info.
1.3.6.1.4.1.2011.5.25.151.3.3.9current
hwCtFlowTemplateGroup
OBJECT-GROUP
The table describes the CT-FLOW-Mapping template configuration on the device.
1.3.6.1.4.1.2011.5.25.151.3.3.10current
hwDsteInterfaceCfgGroup
OBJECT-GROUP
The table describes the CT-FLOW-Mapping template configuration on the device.
1.3.6.1.4.1.2011.5.25.151.3.3.11current