MIBs Depot

HUAWEI-TUNNEL-MIB

Registered at
1.3.6.1.4.1.2011.5.25.201
Last updated
2014-10-24 00:00
Organization
Huawei Technologies Co.,Ltd.
Revisions
2014-10-24 00:00, 2014-07-26 00:00, 2013-12-18 00:00, 2013-11-13 00:00, 2013-10-14 00:00
Namespace
huawei
Source file
HUAWEI-TUNNEL-MIB
Digest
sha256:1f5a3692f11058740626f9cc4647fd05c2c553d4324a5852d2d94091bb7aef81

Description

V2.05 Update hwHybridDynBwPunish and hwHybridDynBwResume, modify their description.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-MIBhwDatacomm
IF-MIBifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
IPV6-MIBipv6IfIndex
IPV6-TCIpv6Address
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HUAWEI-MIB
HUAWEI-TUNNEL-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IPV6-MIB
IPV6-TC
P-BRIDGE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hwTunnelMibObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.201.1
hwTunnelCfgTable
OBJECT-TYPE
MIB table for the tunnel configuration information.
1.3.6.1.4.1.2011.5.25.201.1.1not-accessiblecurrent
hwTunnelCfgEntry
OBJECT-TYPE
Describes tunnel interface configuration information.
1.3.6.1.4.1.2011.5.25.201.1.1.1not-accessiblecurrent
hwTunnelProtocol
OBJECT-TYPE
This object specifies the Tunnel protocol type.
1.3.6.1.4.1.2011.5.25.201.1.1.1.1INTEGER {gre(1), mplsTe(2), ipv6Ipv4(3), ipv6Ipv4Auto(4), ipv6Ipv46to4(5), ipv6Ipv4Isatap(6), ipv4Ipv6(7), none(8)}read-writecurrent
hwTunnelSourceType
OBJECT-TYPE
This object specifies the Tunnel source type.
1.3.6.1.4.1.2011.5.25.201.1.1.1.2INTEGER {interfaceName(1), sourceAddress(2), unknown(3)}read-writecurrent
hwTunnelSrcIfName
OBJECT-TYPE
This object specifies the tunnel source interface name.
1.3.6.1.4.1.2011.5.25.201.1.1.1.3DisplayStringread-writecurrent
hwTunnelAddrType
OBJECT-TYPE
This object specifies the address type for Tunnel source and destination address.
1.3.6.1.4.1.2011.5.25.201.1.1.1.4InetAddressTyperead-writecurrent
hwTunnelSourceAddr
OBJECT-TYPE
This object specifies source address of the tunnel interface.
1.3.6.1.4.1.2011.5.25.201.1.1.1.5InetAddressread-writecurrent
hwTunnelDestinationAddr
OBJECT-TYPE
This object specifies destination address of the tunnel interface.
1.3.6.1.4.1.2011.5.25.201.1.1.1.6InetAddressread-writecurrent
hwTunnelCfgUndoFlag
OBJECT-TYPE
This object specifies undo operation for specified hwTunnelCfgTable parameter.
1.3.6.1.4.1.2011.5.25.201.1.1.1.7INTEGER {undoTunnelProtocol(1), undoTunnelSource(2), undoTunnelDestination(3), invalid(4)}read-writecurrent
hwIpv6Tunnel4Over6CfgTable
OBJECT-TYPE
MIB table for 4Over6 tunnel configuration information.
1.3.6.1.4.1.2011.5.25.201.1.2not-accessiblecurrent
hwIpv6Tunnel4Over6CfgEntry
OBJECT-TYPE
Describes IPv6 tunnel 4Over6 parameters.
1.3.6.1.4.1.2011.5.25.201.1.2.1not-accessiblecurrent
hwIpv6TunnelEncapLimit
OBJECT-TYPE
This object specifies Tunnel ipv4-ipv6 encapsulation limit.
1.3.6.1.4.1.2011.5.25.201.1.2.1.1Integer32 (0..255)read-writecurrent
hwIpv6TunnelEncapLimitDisable
OBJECT-TYPE
This object specifies Tunnel encapsulation is disabled or not. Default value is false.
1.3.6.1.4.1.2011.5.25.201.1.2.1.2TruthValueread-onlycurrent
hwIpv6TunnelFlowLabel
OBJECT-TYPE
This object specifies Tunnel ipv4-ipv6 flow label.
1.3.6.1.4.1.2011.5.25.201.1.2.1.3Integer32 (0..1048575)read-writecurrent
hwIpv6TunnelHopLimit
OBJECT-TYPE
This object specifies Tunnel ipv4-ipv6 hop limit.
1.3.6.1.4.1.2011.5.25.201.1.2.1.4Integer32 (1..255)read-writecurrent
hwIpv6TunnelTrafficClass
OBJECT-TYPE
This object specifies Tunnel ipv4-ipv6 traffic-class.
1.3.6.1.4.1.2011.5.25.201.1.2.1.5Integer32 (0..255)read-writecurrent
hwIpv6TunnelTrafficOriginal
OBJECT-TYPE
Specifies Tunnel ipv4-ipv6 traffic-class original is enabled or not.
1.3.6.1.4.1.2011.5.25.201.1.2.1.6TruthValueread-writecurrent
hwIPv6Tunnel4Over6CfgUndoFlag
OBJECT-TYPE
This object specifies undo operation for specified hwIpv6Tunnel4Over6CfgTable parameter.
1.3.6.1.4.1.2011.5.25.201.1.2.1.7INTEGER {undoTunnelEncapLimit(1), undoTunnelFlowLabel(2), undoTunnelHopLimit(3), undoTunnelTrafficClass(4), invalid(5)}read-writecurrent
hwTunnelGlobalConfigObject
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.201.1.3
hwTunnelCreateFailCheckPeriod
OBJECT-TYPE
This value of this object identifies the interval used to check tunnel failures.
1.3.6.1.4.1.2011.5.25.201.1.3.1Integer32 (1..1440)read-writecurrent
hwTunnelCreateFailThreshold
OBJECT-TYPE
This value of this object identifies the threshold of tunnel failures.
1.3.6.1.4.1.2011.5.25.201.1.3.2Integer32 (1..102400)read-writecurrent
hwTunnelKeepaliveTimeoutPeriod
OBJECT-TYPE
This value of this object identifies the interval used to check tunnel keepalive timeouts.
1.3.6.1.4.1.2011.5.25.201.1.3.3Integer32 (1..1440)read-writecurrent
hwTunnelKeepaliveTimeoutThreshold
OBJECT-TYPE
This value of this object identifies the threshold of tunnel keepalive timeouts.
1.3.6.1.4.1.2011.5.25.201.1.3.4Integer32 (1..102400)read-writecurrent
hwHybridAccessTunnelGlobalStatTable
OBJECT-TYPE
This object indicates the MIB table for hybrid access tunnel statistics information.
1.3.6.1.4.1.2011.5.25.201.1.4not-accessiblecurrent
hwHybridAccessTunnelGlobalStatEntry
OBJECT-TYPE
This object indicates the hybrid access tunnel statistics parameters.
1.3.6.1.4.1.2011.5.25.201.1.4.1not-accessiblecurrent
hwTunnelType
OBJECT-TYPE
This object indicates the tunnel type.
1.3.6.1.4.1.2011.5.25.201.1.4.1.1INTEGER {overflow(1), priority(2)}not-accessiblecurrent
hwTunnelCreateSuccessCnt
OBJECT-TYPE
The value of this object identifies the total number of GRE tunnels set up on each device.
1.3.6.1.4.1.2011.5.25.201.1.4.1.2Counter64read-onlycurrent
hwTunnelRequestPktRcvCnt
OBJECT-TYPE
The value of this object identifies the total number of requests to create GRE tunnels on each device.
1.3.6.1.4.1.2011.5.25.201.1.4.1.3Counter64read-onlycurrent
hwTunnelAuthenSuccessCnt
OBJECT-TYPE
The value of this object identifies the number of authentication successes of GRE Tunnels.
1.3.6.1.4.1.2011.5.25.201.1.4.1.4Counter64read-onlycurrent
hwTunnelAuthorSuccessCnt
OBJECT-TYPE
The value of this object identifies the number of authorization successes of GRE Tunnels.
1.3.6.1.4.1.2011.5.25.201.1.4.1.5Counter64read-onlycurrent
hwTunnelAuthenAttemptCnt
OBJECT-TYPE
The value of this object identifies the number of authentication attempts of GRE Tunnels.
1.3.6.1.4.1.2011.5.25.201.1.4.1.6Counter64read-onlycurrent
hwTunnelAuthorAttemptCnt
OBJECT-TYPE
The value of this object identifies the number of of authorization attempts of GRE Tunnels.
1.3.6.1.4.1.2011.5.25.201.1.4.1.7Counter64read-onlycurrent
hwTunnelTimeOutCnt
OBJECT-TYPE
The value of this object identifies the number of of tunnels that have timed out.
1.3.6.1.4.1.2011.5.25.201.1.4.1.8Counter64read-onlycurrent
hwTunnelAuthUnknownCnt
OBJECT-TYPE
The value of this object identifies the number of authentication/authorization requests rejected because of Unknown Customer
1.3.6.1.4.1.2011.5.25.201.1.4.1.9Counter64read-onlycurrent
hwTunnelAuthNotAllowedCnt
OBJECT-TYPE
The value of this object identifies the number of authentication/authorization requests rejected because of Service not allowed
1.3.6.1.4.1.2011.5.25.201.1.4.1.10Counter64read-onlycurrent
hwTunnelAuthFailOthersCnt
OBJECT-TYPE
The value of this object identifies the number of authentication/authorization requests rejected because of Others reason.
1.3.6.1.4.1.2011.5.25.201.1.4.1.11Counter64read-onlycurrent
hwTunnelCreateFailCnt
OBJECT-TYPE
The value of this object identifies the total number of GRE tunnel creation failures on each device.
1.3.6.1.4.1.2011.5.25.201.1.4.1.12Counter64read-onlycurrent
hwTunnelInDataFlow
OBJECT-TYPE
This object indicates the uplink data volume using the tunnel connection.
1.3.6.1.4.1.2011.5.25.201.1.4.1.13Counter64read-onlycurrent
hwTunnelOutDataFlow
OBJECT-TYPE
This object indicates the downlink data volume using the tunnel connection.
1.3.6.1.4.1.2011.5.25.201.1.4.1.14Counter64read-onlycurrent
hwTunnelTrapObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.201.1.5
hwHybridRttThreshold
OBJECT-TYPE
The value of this object identifies the hybrid-access tunnel rtt check threshold.
1.3.6.1.4.1.2011.5.25.201.1.5.1Integer32accessible-for-notifycurrent
hwHybridRttCheckTimes
OBJECT-TYPE
The value of this object identifies the hybrid-access tunnel rtt check times.
1.3.6.1.4.1.2011.5.25.201.1.5.2Integer32accessible-for-notifycurrent
hwHybridCreateFailValue
OBJECT-TYPE
The value of this object identifies the hybrid-access tunnel create fail error value.
1.3.6.1.4.1.2011.5.25.201.1.5.3Integer32accessible-for-notifycurrent
hwHybridTunnelType
OBJECT-TYPE
The value of this object identifies the hybrid-access tunnel type.
1.3.6.1.4.1.2011.5.25.201.1.5.4Integer32accessible-for-notifycurrent
hwHybridDynDLBwAdjustValue
OBJECT-TYPE
The value of this object identifies the hybrid-access tunnel down-link bandwith adjust value.
1.3.6.1.4.1.2011.5.25.201.1.5.5Integer32accessible-for-notifycurrent
hwHybridDynULBwAdjustValue
OBJECT-TYPE
The value of this object identifies the hybrid-access tunnel up-link bandwith adjust value.
1.3.6.1.4.1.2011.5.25.201.1.5.6Integer32accessible-for-notifycurrent
hwTunnelMibConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.201.2
hwTunnelCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.201.2.1
hwTunnelGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.201.2.2
hwTunnelNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.201.3

Notifications

NameOIDStatus
hwTunnelCreateFailOverThreshold
NOTIFICATION-TYPE
This object indicates that an alarm is generated if the number of tunnel failures exceeds the threshold during a period.
1.3.6.1.4.1.2011.5.25.201.3.1current
hwOverflowTunnelTimeoutOverThreshold
NOTIFICATION-TYPE
This object indicates that an alarm is generated if the number of overflow tunnel timeouts of hello packets exceeds the threshold during a period.
1.3.6.1.4.1.2011.5.25.201.3.2current
hwPriorTunnelTimeoutOverThreshold
NOTIFICATION-TYPE
This object indicates that an alarm is generated if the number of priority tunnel timeouts of hello packets exceeds the threshold during a period.
1.3.6.1.4.1.2011.5.25.201.3.3current
hwHybridTunnelCreateFail
NOTIFICATION-TYPE
This object indicates that the overflow or priority tunnel fails to be created.
1.3.6.1.4.1.2011.5.25.201.3.4current
hwHybridSwitch2PriorTunnel
NOTIFICATION-TYPE
This object indicates that the delay of the overflow tunnel exceeds the threshold and traffic is switched to the priority tunnel.
1.3.6.1.4.1.2011.5.25.201.3.5current
hwHybridSwitch2OverflowTunnel
NOTIFICATION-TYPE
This object indicates that that the delay of the overflow tunnel falls below the threshold and can be used to forward traffic again.
1.3.6.1.4.1.2011.5.25.201.3.6current
hwHybridDynBwPunish
NOTIFICATION-TYPE
This object indicates that the bandwidth of the priority tunnel needs to be reduced.
1.3.6.1.4.1.2011.5.25.201.3.7current
hwHybridDynBwResume
NOTIFICATION-TYPE
This object indicates that the bandwidth of the priority tunnel needs to be increased.
1.3.6.1.4.1.2011.5.25.201.3.8current

Conformance

NameOIDStatus
hwTunnelCompliance
MODULE-COMPLIANCE
The compliance statement for systems supporting the HUAWEI-TUNNEL-MIB.
1.3.6.1.4.1.2011.5.25.201.2.1.1current
hwTunnelGroup
OBJECT-GROUP
The Tunnel table member.
1.3.6.1.4.1.2011.5.25.201.2.2.1current
hwTunnelNotificationGroup
NOTIFICATION-GROUP
Tunnel trap group.
1.3.6.1.4.1.2011.5.25.201.2.2.2current