MIBs Depot

HUAWEI-TAD-MIB

Registered at
1.3.6.1.4.1.2011.5.25.128
Last updated
2014-03-19 11:00
Organization
Huawei Technologies Co.,Ltd.
Revisions
2014-03-19 11:00, 2006-06-28 16:00
Namespace
huawei
Source file
HUAWEI-TAD-MIB
Digest
sha256:4c0aa2c132eebfc88273e92cdd6beb382e6921e0f0be2a7031bc0b252a42c61d

Description

The Custom damping MIB module is defined to manage the configuration under system or interface view.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-MIBhwDatacomm
IF-MIBInterfaceIndex, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HUAWEI-MIB
HUAWEI-TAD-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
HWEnableValue
TEXTUAL-CONVENTION
A simple status value for the object.
current

Objects

NameOIDSyntaxAccessStatus
hwTADObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.128.1
hwTADInterfaceTable
OBJECT-TYPE
Transmission alarm damping interface configuration table.
1.3.6.1.4.1.2011.5.25.128.1.1not-accessiblecurrent
hwTADInterfaceEntry
OBJECT-TYPE
The entry of a SDH or SONET interface with damping function enabled.
1.3.6.1.4.1.2011.5.25.128.1.1.1not-accessiblecurrent
hwTADInterfaceIndex
OBJECT-TYPE
Index number of the interface.
1.3.6.1.4.1.2011.5.25.128.1.1.1.1InterfaceIndexnot-accessiblecurrent
hwTADFilterEnable
OBJECT-TYPE
Whether filter function is enabled.
1.3.6.1.4.1.2011.5.25.128.1.1.1.2HWEnableValueread-writecurrent
hwTADFilterExpireTime
OBJECT-TYPE
How long the alarm will be postponed to process. Unit: millisecond.
1.3.6.1.4.1.2011.5.25.128.1.1.1.3Integer32 (20..10000)read-writecurrent
hwTADDampingEnable
OBJECT-TYPE
Whether damping function is enabled.
1.3.6.1.4.1.2011.5.25.128.1.1.1.4HWEnableValueread-writecurrent
hwTADSuppress
OBJECT-TYPE
The suppressing value. When figure-of-merit of alarm exceeds this value, this alarm will be damped.
1.3.6.1.4.1.2011.5.25.128.1.1.1.5Integer32 (2..19999)read-writecurrent
hwTADCeiling
OBJECT-TYPE
The ceiling value. Figure-of-merit can't exceed this value. The ceiling value must be larger than suppressing value.
1.3.6.1.4.1.2011.5.25.128.1.1.1.6Integer32 (1001..20000)read-writecurrent
hwTADReuse
OBJECT-TYPE
The reusing value. When figure-of-merit becomes lower than this value. The alarm will be reused (exit from suppressing status). The reusing value must be less than suppressing value.
1.3.6.1.4.1.2011.5.25.128.1.1.1.7Integer32 (1..19998)read-writecurrent
hwTADDecayOk
OBJECT-TYPE
The half decay time when alarm status is down. Unit: millisecond.
1.3.6.1.4.1.2011.5.25.128.1.1.1.8Integer32 (500..10000)read-writecurrent
hwTADDecayNg
OBJECT-TYPE
The half decay time when alarm status is up. Unit: millisecond.
1.3.6.1.4.1.2011.5.25.128.1.1.1.9Integer32 (500..10000)read-writecurrent
hwTADResetStatistics
OBJECT-TYPE
Whether to reset alarm statistics. 1 means resetting statistics once.
1.3.6.1.4.1.2011.5.25.128.1.1.1.10INTEGER {reset(1), unreset(2)}read-writecurrent
hwTADResetTime
OBJECT-TYPE
Last reset time.
1.3.6.1.4.1.2011.5.25.128.1.1.1.11DateAndTimeread-onlycurrent
hwTADB3tcaThreshold
OBJECT-TYPE
B3tca threshold in form of 10e-n.
1.3.6.1.4.1.2011.5.25.128.1.1.1.12Integer32 (3..9)read-writecurrent
hwTADSdbereThreshold
OBJECT-TYPE
Sdbere threshold in form of 10e-n.
1.3.6.1.4.1.2011.5.25.128.1.1.1.13Integer32 (3..9)read-writecurrent
hwTADSfbereThreshold
OBJECT-TYPE
Sfbere threshold in form of 10e-n.
1.3.6.1.4.1.2011.5.25.128.1.1.1.14Integer32 (3..9)read-writecurrent
hwTADB1tcaThreshold
OBJECT-TYPE
B1tca threshold in form of 10e-n.
1.3.6.1.4.1.2011.5.25.128.1.1.1.15Integer32 (3..9)read-writecurrent
hwTADB2tcaThreshold
OBJECT-TYPE
B2tca threshold in form of 10e-n.
1.3.6.1.4.1.2011.5.25.128.1.1.1.16Integer32 (3..9)read-writecurrent
hwTADBip2tcaThreshold
OBJECT-TYPE
Bip2tca threshold in form of 10e-n.
1.3.6.1.4.1.2011.5.25.128.1.1.1.17Integer32 (3..9)read-writecurrent
hwTADAlarmTable
OBJECT-TYPE
Transmission alarm damping alarm configuration table.
1.3.6.1.4.1.2011.5.25.128.1.2not-accessiblecurrent
hwTADAlarmEntry
OBJECT-TYPE
The entry of an alarm.
1.3.6.1.4.1.2011.5.25.128.1.2.1not-accessiblecurrent
hwTADAlarmIfIndex
OBJECT-TYPE
Index number of the interface.
1.3.6.1.4.1.2011.5.25.128.1.2.1.1InterfaceIndexnot-accessiblecurrent
hwTADAlarmType
OBJECT-TYPE
Index number of the alarm. The range is from 1 to 39, corresponding to: auais, b3tca, lais, lof, lom, lop, los, lrdi, lrei, oof, pais, prdi, prei, pplm, rdool, rrool, sdbere, sfbere, trool, puneq, lcd, wlnk, oduais, odulck, oduoci, otuais, otulom, otusdber, otusfber, pmbdi, pmtim, rlof, rlos, roof, smbdi, smiae, smtim, b1tca, b2tca, prefectca.
1.3.6.1.4.1.2011.5.25.128.1.2.1.2INTEGER {auais(1), b3tca(2), lais(3), lof(4), lom(5), lop(6), los(7), lrdi(8), lrei(9), oof(10), pais(11), prdi(12), prei(13), pplm(14), rdool(15), rrool(16), sdbere(17), sfbere(18), trool(19), puneq(20), lcd(21), wlnk(22), oduais(23), odulck(24), oduoci(25), otuais(26), otuom(27), otusdber(28), otusfber(29), pmbdi(30), pmtim(31), rlof(32), rlos(33), roof(34), smbdi(35), smiae(36), smtim(37), b1tca(38), b2tca(39), prefectca(40)}not-accessiblecurrent
hwTADAlarmIfDown
OBJECT-TYPE
Whether this alarm leads to interface down. In default lais, lof and los are enabled to lead interface down.
1.3.6.1.4.1.2011.5.25.128.1.2.1.3HWEnableValueread-writecurrent
hwTADAlarmLog
OBJECT-TYPE
Whether this alarm will be logged. In default all alarm types won't be logged.
1.3.6.1.4.1.2011.5.25.128.1.2.1.4HWEnableValueread-writecurrent
hwTADAlarmStatus
OBJECT-TYPE
The status of the alarm. 1 means alarm is up, 2 means alarm is down.
1.3.6.1.4.1.2011.5.25.128.1.2.1.5INTEGER {up(1), down(2)}read-onlycurrent
hwTADAlarmInFilter
OBJECT-TYPE
Whether this alarm is in filtering status. 1 means alarm is in filtering status, 2 means alarm isn't in filtering status.
1.3.6.1.4.1.2011.5.25.128.1.2.1.6INTEGER {in(1), out(2)}read-onlycurrent
hwTADAlarmFigure
OBJECT-TYPE
This figure is used to evaluate the stability of the alarm. Large value means un-stability.
1.3.6.1.4.1.2011.5.25.128.1.2.1.7DisplayStringread-onlycurrent
hwTADAlarmInSuppress
OBJECT-TYPE
Whether this alarm is in suppressing status. 1 means alarm is in suppressing status, 2 means alarm isn't in suppressing status.
1.3.6.1.4.1.2011.5.25.128.1.2.1.8INTEGER {suppressed(1), unsuppressed(2)}read-onlycurrent
hwTADAlarmFlappingCount
OBJECT-TYPE
How many times alarm's status changed.
1.3.6.1.4.1.2011.5.25.128.1.2.1.9Counter32read-onlycurrent
hwTADAlarmSuppressCount
OBJECT-TYPE
How many times alarm is suppressed.
1.3.6.1.4.1.2011.5.25.128.1.2.1.10Counter32read-onlycurrent
hwTADConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.128.2
hwTADGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.128.2.1
hwTADCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.128.2.2

Conformance

NameOIDStatus
hwTADInterfaceGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the interface.
1.3.6.1.4.1.2011.5.25.128.2.1.1current
hwTADAlarmGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the alarm.
1.3.6.1.4.1.2011.5.25.128.2.1.2current
hwTADCompliance
MODULE-COMPLIANCE
The core compliance statement for all TAD implementations.
1.3.6.1.4.1.2011.5.25.128.2.2.1current